Search Results

Search found 279 results on 12 pages for '3gb'.

Page 2/12 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• Will Ubuntu work on a Dell Inspiron 15R?

  - by Daniel Davis

  I want to know how to install Ubuntu on a Dell Inspiron 15R with Intel Core i3, 3GB RAM, Intel HD graphics and 320GB HDD. I've heard some people have had issues with the wireless card. Also, I tried a few days ago to install the 64-bit version of Ubuntu 10.10 and the installaten hung on the "Who are you" screen... Can anyone help me, I really want to get into Linux but without having any problems with the laptops drivers.

  Read the article

• HP Pavilion dv5 boots with low brightness and graphics card not recognized

  - by cesar

  My problem is with Ubuntu 11.10 in my notebook hp pavilion dv5 with a graphic Intel(R) hd graphics. When I start Ubuntu my screen is without brightness, I can increase it with my control buttons, but when I restart I don't have brightness again. also Ubuntu doesn't recognize my graphic card (Intel HD (R) graphics), please i need your help because i like Ubuntu and i would like have it in my laptop (HP dv5 2045la) (3GB RAM) (500 GB DISK). PS: I installed the repository MESA and now recognizes my card but my problem with the brightness

  Read the article

• The Alienware M11xR3 has arrived

  - by Enrique Lima

  A week or so ago, I mentioned my gear was evolving.  The newest member of my gear arrived yesterday, an Alienware M11xR3. Here are the specs: Intel Core i7-2617M 1.5GHz (2.6GHz Turbo Mode, 4MB Cache) NVIDIA GeForce GT540 graphics with 2.0GB Video Memory and Optimus 16GB Dual Channel DDR3 at 1333MHz 11.6in High Def (720p/1366x768) with WLED backlight 750GB 7200RPM SATA 3Gb/s Soundblaster X-Fi Hi Def Audio - Software Enabled Intel Advanced-N WiFi Link 6250 a/g/n 2x2 MIMO Technology with WiMax Gobi Mobile Broadband with GPS - supports ATT with contract Internal Bluetooth 3.0   Some pics from the unboxing event:

  Read the article

• Three's mobile broadband

  - by Brian Taylor

  I've recently downloaded Ubuntu 12.10 and it seems great I just can't get my three ireland mifi dongle to work at all. When I plug it in, it only recognizes it as a storage devise. Any idea's of how establish a permanent connection to this mifi dongle? I'm in Ireland and running a Dell Inspiron 1520 with 3gb of ram and using the huawei E586 mifi device. Really want to continue using this os but is everything this complicated to get up and running on it?

  Read the article

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• Decyphering Seagate drive model numbers?

  - by Stefan Lasiewski

  I'm comparing Seagate's Enterprise and Desktop drives for a variety of old and new servers. These servers come from different generations, so options like size (73GB, 2TB) and interface (SATA vs SAS 3.0Gbps vs SAS 6Gbps vs SCSI Ultra320) are widely variable. I'm trying to compare the sizes, speeds and interfaces, but I'm getting thrown off by different models. Also, their website is not the best. Does anyone know of a documented explanation of the Seagate model numbers? And is there a single spreadsheet which compares the features for all drives (or all 'Enterprise' drives?). Seagate drives have model numbers like this: Model ST3600057SS 6-Gb/s SAS 600 GB None at Cheetah® 15K Hard Drives Model ST373455LW Ultra320 SCSI 73.4 GB 68-Pin LW at Cheetah® 15K Hard Drives Model ST32000644NS SATA 3Gb/s 2 TB None at Constellation™ ES Hard Drives Model ST973452SS 6-Gb/s SAS 73 GB None Savvio® 15K Hard Drives Model ST9200011FS SATA 3Gb/s 200 GB Pulsar™ Solid State Drives I understand the model numbers read something like this: ST - SOMETHING1 - SIZE - SOMETHING2 - INTERFACE Where the fields mean something like this: ST : For 'Seagate'? 'Seagate Technoligies'? SOMETHING1 - This field has number, but I'm not sure what that represents. SIZE - Size in Gigabytes. This is a number like '73' or '300' or '2000' SOMETHING2 - This field also has a number, but I'm not sure what it means. INTERFACE - This field seems to indicate the Interface. 'SS' means SAS, 'FC' means Fibre Channel, but I don't see how to distinguish between 6Gbps SAS and 3Gbps SAS, or different SATA or FC speeds. I don't see a field which indicates the RPM (15K , 10K, 7.2K) etc. Is this part of the model number?

  Read the article

• Is this processor burned?

  - by Jhonnytunes

  I've recently exchange the processors in two PCChips boards. Both boards are LGA775. Board A is P17G(Pentium 4 HyperThreading 3GHz) and board B is P49G(Pentium Dual Core 3GHz). I use board A to watch videos, and some of them are 3GB size and this is why I exchanged the CPU. I installed Dual Core in board A and it worked out of the box, now 3GB videos use 5% of CPU instead of 50%. When I installed the pentium in the board B, I forgot to connect the 4pin power and, when i powered on the PC, the CPU fan stay off. Then, I connected all right this time, and now the board doesnt show video. I think the CPU is not working but im not sure about that. The PC turns on and the HD spins, the CPU fan spins, network socket blinking, but not video and case power led is neither blinking. I tried with other PSU and everything was the same. I figure out that CPU have that paste above. IDK really what's happening, I hope I dont have to buy another CPU. Is it Burned?

  Read the article

• Adding more drives to a drive array

  - by Mystere Man

  I have a friend who has two servers, a Dell 1800 and an HP 350 ML G5, both have SAS drive arrays. The Dell is a 3.5" and the HP is a 2.5". They currently only have 3 drives in each array. We want to add additional drives, but they do not appear to have caddies, just "fake" covers. I haven't been able to take a good look at them, so I'm not sure what I need to do here. Are the "sockets" just there, and I can buy additional caddies and just stick them in? Or do I have to buy some kind of caddy adapter? Also, i'm thinking of just going 2.5" in the new server, so is there a 2.5" adapter caddy that will fit in the 3.5" chassis for the Dell, so I can use 2.5" drives in the 3.5" chassis? Can I buy 6GB/s drives and add them to the 3GB/s controller? The reason is that we're going to replace both computers in a year or so, and we want to bring the drives with. So rather than buy 3GB/s drives, we just want to buy 6GB/s drives so they can be used in the new server.

  Read the article

• Eee PC 1015BX ram compatibility?

  - by AdrianaMX

  Asus Eee PC 1015BX Operating System Windows 7 Starter, 32bit CPU AMD Fusion APU C60 1.0GHz (dual core) Processor Graphic AMD Radeon HD 6290 (256 MB Shared) Memory DDR3, 1 x SO-DIMM, 1GB I have upgraded the preloaded "Windows 7 Starter" to "Windows 7 Professional" I want to upgrade the ram, from 1gb (factory) to 4 gb. What should i buy? SODDR3, 4GB, 1066MHZ, PC3-8500, 204PIN? or SODDR3, 4GB, 1333MHZ, PC3-10666, 204PIN? I already know that Windows 7 32-bits can't handle 4gb, only 3gb (but 3gb is better than one stick of 2gb). ASUS send me this link, but i think they are wrong, (or Insufficient Information for me) http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=ASU&Line=Eee%20PC&Model=71404 Thank you. CPU-Z Chipset Memory Type DDR3 Memory Size 750 MBytes Memory Frequency 532.2 MHz (3:16) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Bank Cycle Time (tRC) 27 Memory SPD NO INFO AIDA64 North bridge Properties North bridge AMD K14 IMC Supported Memory Types DDR3-800, DDR3-1066 SDRAM Memory Slots DRAM Slot #1 1 GB (DDR3 SDRAM) Integrated Graphics Controller Graphics Controller Type AMD Radeon HD 6290 (Wrestler) Graphics Controller Status Enabled Graphics Frame Buffer Size 256 MB

  Read the article

• Optimize Use of Ramdisk for Eclipse Development

  - by Eric J.

  We're developing Java/SpringSource applications with Eclipse on 32-bit Vista machines with 4GB RAM. The OS exposes roughly 3.3GB of RAM due to reservations for hardware etc. in the virtual address space. I came across several Ramdisk drivers that can create a virtual disk from the OS-hidden RAM and am looking for suggestions how best to use the 740MB virtual disk to speed development in our environment. The slowest part of development for us is compiling as well as launching SpringSource dm Server. One option is to configure Vista to swap to the Ramdisk. That works, and noticeably speeds up development in low memory situations. However, the 3.3GB available to the OS is often sufficient and there are many situations where we do not use the swap file(s) much. Another option is to use the Ramdisk as a location for temporary files. Using the Vista mklink command, I created a hard link from where the SpringSource dm Server's work area normally resides to the Ramdisk. That significantly improves server startup times but does nothing for compile times. There are roughly 500MB still free on the Ramdisk when the work directory is fully utilized, so room for plenty more. What other files/directories might be candidates to place on the Ramdisk? Eclipse-related files? (Parts of) the JDK? Is there a free/open source tool for Vista that will show me which files are used most frequently during a period of time to reduce the guesswork?

  Read the article

• Interface for reading variable length files with header and footer.

  - by John S

  I could use some hints or tips for a decent interface for reading file of special characteristics. The files in question has a header (~120 bytes), a body (1 byte - 3gb) and a footer (4 bytes). The header contains information about the body and the footer is only a simple CRC32-value of the body. I use Java so my idea was to extend the "InputStream" class and add a constructor such as "public MyInStream( InputStream in)" where I immediately read the header and the direct the overridden read()'s the body. Problem is, I can't give the user of the class the CRC32-value until the whole body has been read. Because the file can be 3gb large, putting it all in memory is a be an idea. Reading it all in to a temporary file is going to be a performance hit if there are many small files. I don't know how large the file is because the InputStream doesn't have to be a file, it could be a socket. Looking at it again, maybe extending InputStream is a bad idea. Thank you for reading the confused thoughts of a tired programmer. :)

  Read the article

• RAM modules compadibility

  - by teejmya

  My current laptop has 3GB (1x2GB, 1x1GB) of DDR2 RAM installed, and they run at 667MHz. I just ordered a new laptop, that comes with 2GB (2x1GB) of DDR3 RAM that runs at 1066MHz. Is there any compatibility with the two? Can I install the 2GB stick in my old laptop in the new laptop, and have both DDR2/DDR3 and 667MHz/1066MHz operating together? Or should I buy a new RAM stick for my new laptop?

  Read the article

• Performance Tweaks for Adobe After Effects?

  - by Roy Rico

  I am a new user to Adobe After Effects. I have a 2 year old system, which i just upgraded to 8GB of ram (from 3GB). I've also switched my windows page file to a seperate physical drive. I'm looking for additional suggestions for After Effects.

  Read the article

• How do you use 4GB of RAM?

  - by Xeoncross

  I have a Quad Core Intel PC with 4GB of RAM - I've been using it over a year to run web server stress tests (ab.exe -n 5000 -c 500), encode HD video, play games, open hundreds of tabs in multiple browsers (simultaneously), worked on multi-layered +8000px art in photoshop and just about every other thing you can think of. As of yet I've never passed 2.3GB of RAM usage. How in the world do you use all 4GB? Is there any use for it?

  Read the article

• How Do I Know the Memory Used by Apps

  - by user176890

  Is it possible to know the memory used by any apps running on my linux server? I'm using the following command to know how much memory used by php-fpm. ps -ylC php5-fpm --sort:rss | awk '!/RSS/ { s+=$8 } END { printf "%s\n", "Total memory used by PHP-FPM child processes: "; printf "%dM\n", s/1024 }' Given the command above, I want to know the memory used by all apps with an example output below: PHP-FPM: 2.3gb MySQL: 5gb nginx: 200mb dovecot: 100mb memcached: 573mb

  Read the article

• Apache and MySQL taking all the memory? Maximum connections?

  - by lpfavreau

  I've a had one of our servers going down (network wise) but keeping its uptime (so looks the server is not losing its power) recently. I've asked my hosting company to investigate and I've been told, after investigation, that Apache and MySQL were at all time using 80% of the memory and peaking at 95% and that I might be needing to add some more RAM to the server. One of their justifications to adding more RAM was that I was using the default max connections setting (125 for MySQL and 150 for Apache) and that for handling those 150 simultaneous connections, I would need at least 3Gb of memory instead of the 1Gb I have at the moment. Now, I understand that tweaking the max connections might be better than me leaving the default setting although I didn't feel it was a concern at the moment, having had servers with the same configuration handle more traffic than the current 1 or 2 visitors before the lunch, telling myself I'd tweak it depending on the visits pattern later. I've also always known Apache was more memory hungry under default settings than its competitor such as nginx and lighttpd. Nonetheless, looking at the stats of my machine, I'm trying to see how my hosting company got those numbers. I'm getting: # free -m total used free shared buffers cached Mem: 1000 944 56 0 148 725 -/+ buffers/cache: 71 929 Swap: 1953 0 1953 Which I guess means that yes, the server is reserving around 95% of its memory at the moment but I also thought it meant that only 71 out of the 1000 total were really used by the applications at the moment looking a the buffers/cache row. Also I don't see any swapping: # vmstat 60 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 57612 151704 742596 0 0 1 1 3 11 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 1 1 24 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 2 1 18 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 0 1 13 0 0 100 0 And finally, while requesting a page: top - 08:33:19 up 3 days, 13:11, 2 users, load average: 0.06, 0.02, 0.00 Tasks: 81 total, 1 running, 80 sleeping, 0 stopped, 0 zombie Cpu(s): 1.3%us, 0.3%sy, 0.0%ni, 98.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024616k total, 976744k used, 47872k free, 151716k buffers Swap: 2000052k total, 0k used, 2000052k free, 742596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24914 www-data 20 0 26296 8640 3724 S 2 0.8 0:00.06 apache2 23785 mysql 20 0 125m 18m 5268 S 1 1.9 0:04.54 mysqld 24491 www-data 20 0 25828 7488 3180 S 1 0.7 0:00.02 apache2 1 root 20 0 2844 1688 544 S 0 0.2 0:01.30 init ... So, I'd like to know, experts of serverfault: Do I really need more RAM at the moment? How do they calculate that for 150 simultaneous connections I'd need 3Gb? Thanks for your help!

  Read the article

• Process out of memory (but RAM still available) - How to increase process memory cap?

  - by Janis Veinbergs

  Doing copy/paste in Visual Studio 2010 RTM on Windows 7, 3GB ram machine, I was unable to copy text because of an error: Task Manager shows that devenv.exe is using a little more than 500MB. However I still have almost 1GB of free RAM available. Is that somekind of memory cap? If so, is there a way to increase it? It may be a bug, but maybe there is a workaround?

  Read the article

• Update multiple Windows 8 to 8.1

  - by muhan

  My office has multiple Windows 8 Machines and slow internet. Is there a place online I can download the 8.1 upgrade from home on my fast internet so I can do a network or usb install at the office? I don't want to have to download 3GB+ of updates on each and every machine through the Windows store over our slow internet connection. The Windows 8 PC's in question are OEM Windows 8 Home, upgraded to Windows 8 Pro via the online Pro pack upgrade.

  Read the article

• Performance Tweaks for Adobe Premiere?

  - by Roy Rico

  I am a new user to Adobe Premiere. I have a 2 year old system, which i just upgraded to 8GB of ram (from 3GB). I've also switched my windows page file to a seperate physical drive. I'm looking for additional suggestions for Premiere.

  Read the article

• How Can I Limit the Amount of RAM a Mac OS Application Can Use?

  - by Peter

  I installed dropbox and it has terrible memory management. It often uses 3GB out of my 4GB of RAM. Is there any way to limit the app memory usage? I would like to never allow more than 250 MB of RAM.

  Read the article

• Increase process memory cap.

  - by Janis Veinbergs

  Doing copy/paste in Visual Studio 2010 RTM on Windows 7, 3GB ram machine, I was unable to copy text because of an error: Task Manager shows that devenv.exe is using a little more than 500MB. However I still have almost 1GB of free RAM available. Is that somekind of memory cap? If so, is there a way to increase it? It may be a bug, but maybe there is a workaround?

  Read the article

• Reducing apache VIRT and RES memory usage

  - by lisa

  On a quad-core server with 8GB of ram I have apache processes that use up to 2.3GB RES memory and 2.6GB VIRT memory. Here is a copy of the top -c command http://imgur.com/x8Lq9.png Is there a way to reduct the memory usage for these apache processes? These are my httpd.conf settings Timeout 160 TraceEnable Off ServerSignature Off ServerTokens ProductOnly FileETag None StartServers 6 <IfModule prefork.c> MinSpareServers 4 MaxSpareServers 16 </IfModule> ServerLimit 400 MaxClients 320 MaxRequestsPerChild 10000 KeepAlive On KeepAliveTimeout 4 MaxKeepAliveRequests 80

  Read the article

• How can I free memory on linux

  - by user35153

  When I use top to see memory usage, I have 65gb ram but only 1.3gb of it free and remaining is shown as used. When I ran my program It gives memory insufficiency error. Although no other program is using the remaining 63.7gb ram it is hold. how can I get free the unused ram?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >