Search Results

Search found 19132 results on 766 pages for 'black screen of death'.

Page 2/766 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >

Black Screen when Computer Boots

- by BlueRaja

I'm having a serious problem with my computer; I think I've narrowed it down to the motherboard, but I'd like a second opinion before I spend the money. Before I moved into my new apartment, my desktop was working fine; now, it just won't work. It will turn on, the fans will spin up, lights come on... but nothing appears on the screen. No POST, nothing. I've tried: A different monitor (both are VGA) A different video-card (both are DVI, PCIe) Three different, known-good VGA-DVI adapters The onboard video port (VGA) Reseating the memory, and trying only one stick Different, known-good wall-outlets Unplugging the HDD and CD-drive from both the motherboard and PSU Replacing the PSU Has anyone had this happen before? Perhaps it's a known problem with this motherboard? Any advice!? Here are my specs: A13G+ V3.0 motherboard 2 2-gig 800mhz DDR2 600-watt PSU two older Geforce video cards

Read the article
11.10 liveCD black screen

- by Shaun Killingbeck

Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

Read the article
How to fix Black screen?

- by stupidwhiteguy

so I recently had my question deleted and merged into a standard how to for blank screens. I am relatively new to This type of computer work and i don't understand the steps nessary to diagnose my problem well enough to solve it so this help full how to has me feeling helpless I can use Ctrl + Alt +F1 and log in So how do I use sudo commands to fix the blank screen on my old dell? sudo lsoci -nn tells me my video card is a ATI rage 128 pro ultra tf /var/log/Xorg.0.log tells me Permission denied that is all i get Sudo apt-get install --reinstall unity tried thay also have also tried Apt-get update and upgrade Please dont close this question without providing an actual answer or if you think it is an exact duplicate provide a solution that worked for that question. I see a lot of these questions as closed and there is no real answer given I will try any solutions available and report results so that others can also solve problems not be overwhelmed by overly broad troubleshooting guides that do nothing to help solve specific issues The nomodeset change from quiet splash also yields no results on reboot I still get a blank screen this screen still has contorl alt f1 abilities but that is it contorl alt f8 causes blinking cursor and F7 gets a crazy flash with green and blue then blank screen Contorl alt f1 a log in prompt in text only when run in recovery mode with failsafe graphics its says the syestem is running in low graphics mode your screen graphics card and input device settings could not be detected correctly. You will need to configure these your self how do i do that? I got this /var/log/failsafeX-backup-120909200641.tar as the location of my log files but i have no idea how to axcess sounds work in blank screen also screen responds or flashes after log in is typed and password entered really any help is good I don't even know where to start I believe 12.04 is installed and functioning but i don't think I can see it at the end of the error log it says error setting mtrr (base= oxf0000000, size= 0x01000000, type=1) inappropriate ioctl for device(25) i have tried to provide as much info as I understand how to provide

Read the article
gnu screen - mouse does not work in nested screen session

- by Matthew

I started a screen session inside another screen session, both on my local machine. This is using cygwin, but I don't think it matters. I have tried via ssh to a real unix machine but the behaviour is the same. Mouse works great in the first screen session, I'm able to open vim with :set mouse=a and I can click to move the cursor or switch tabs, and the mouse wheel scrolls. But in the nested session it does not work, mouse is only useful for selecting terminal text that gets put in the clipboard, but is not able to interact with vim. I want this to work because I usually work with a local screen session, then ssh to a remote server and have a remote screen session running too (hence the nesting) and I like to scroll swiftly in vim by using the mouse wheel. Can anyone tell me why the mouse works in the first layer of screen but not in the second, nested screen session, and how I can make it work? Thanks in advance, Matthew

Read the article
Can't boot into ubuntu, black screen after grub menu

- by wim

Ubuntu is not booting properly for me anymore. The grub menu comes up, and whether I choose a linux recovery mode or the normal one I get a black screen after a few seconds. There is a brief message about vga=791 being deprecated, but I am not able to read it fully because the black screen covers it up almost immediately. I have googled for hours for solutions, and most people seem able to solve similar problems by editing in grub and adding nomodeset into the line starting with linux /boot... but this solution is not working for me, I still don't get any GUI. Sometimes I am able to get the dmesg rolling past, I think it was when I removed quiet splash from that line, but still no GUI - the computer seems to be on and working because it responds to a ctrl-alt-del and reboots. I have tried with 3 different graphics cards (2 nVidia and 1 ATI) and swapping them doesn't seem to change the behaviour at all. What else can I try?

Read the article
Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor

- by user66378

Installation appears to go fine. After rebooting, I get my motherboard loading screens, but when it comes time for Ubuntu to boot, I just get a black screen with a blinking white underscore in the top-left - same as I got when waiting for the install CD to load, except it lasts forever. The only keypress it seems to recognize is ctrl+alt+del, which reboots. Letters don't register, function keys w/ or w/o modifiers do nothing. I've installed Ubuntu 12.04 twice and got the same error. The first time, I installed it as the only OS, and had it take up the whole disk. The second time, I installed Windows 7 first, then Ubuntu by specifying custom partitions. After this install, it would boot straight to Windows without showing grub. I used EasyBCD to add the Ubuntu installation to grub, and this got grub to show, and let me select it, but it led back to the same error described up top. I've had Linux Mint 11 and 12 installed on this PC, but was unable to get previous versions of Ubuntu to install (always had errors while installing, not after). Hardware: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 ASUS SABERTOOTH P67 (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA 01G-P3-1371-TR GeForce GTX 460 (Fermi) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Western Digital RE4 WD5003ABYX 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

Read the article
Unable to get screen signal after purge FGLRX

- by Boris

I thought that my ATI driver was not running well so I wanted to re-instal it completely. I did: sudo apt-get remove --purge fglrx* sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon and after a boot I wanted to intal the ATI driver BUT at the boot no more signal to my screen. Since, every time I turn on my PC it gets to purple screen and then screen shuts down ! Note that: Even if the screen is off, PC seems to be running almost well: I m still able to use my network to access data shared with NFS. Using live USB I have no screen problem. I tried to plug my screen on an alternative output but it did not work. I tried CTRL+ALT+F1 while being on purple screen but it does not do anything, screen shut down anyway. I m going to try the SHIFT thing and learn from blackscreen wiki...

Read the article
Ubuntu not shutting down ( going to black screen ) 12.04

- by Orrin Fox

I am currently using a USB persistent install of ubuntu. its a simple 4GB drive with a 2.8GB partition ( casper-rw storage partition ). I setup an administrator account and set it to login automatically. I also removed ubiquity to simply use this as a go anywhere install. Heres my issue. Im logged in as my account, and I click the top right gear and select "shut down". Text pops up showing its quitting processes.. etc. and then goes to the plymouth animation. But... The screen goes black, and then it goes to the login screen. Now when im at the login screen i go into terminal ( alt+F2 ) and dont you know, im logged in as Ubuntu. so then I try the following: ubuntu@ubuntu:~$ sudo shutdown now It goes to the plymouth screen again as if its shutting down, AND the screen goes black once again but the computer has not turned off, as in the usb is still flashing the light, the fans are still on, the only thing off is the screen. Is this a bug? If not maybe i did something wrong? Perhaps its that I made an account but... if there is a work around for this please let me know. Thanks again, Fox

Read the article
Move a screen session back to its original PID

- by cron410

Installed McMyAdmin (minecraft manager) on Ubuntu 12.04 32 bit. Wrote my own service to start McMyAdmin (.net app running in Mono) in its own screen session, and be able to inject proper McMyAdmin commands into that session with the init.d script. Its been running great! Today, I decided to start installing a Source dedicated server (counterstrike pro mod) I determine its going to be a long download process so I quit the process and fire up a fresh screen session called "source". I paste the command in, but it has a space at the begining and bash complains of ignoring semaphores or some such. I detach and reattach the session. Its sliding like butter. I ctrl+a-d out of the session and start exploring the new folder structure and figure out where I need to place a symbolic link. I go to resume that screen and this is what I see: $screen -r source There are several suitable screens on 20091.source (12/02/12 22:59:53) (Detached) 19972.source (12/02/12 22:57:31) (Detached) 917.minecraft (11/30/12 15:30:37) (Attached) It appears I am connected to the minecraft screen?!?!?! So I attach to the other screens one at a time. minecraft is running in 19972.source and sourceds is running in 20091.source So how the hell did I move the minecraft process to another session called source and my main terminal is now "attached" to the minecraft screen? more: I just used exit to quit the putty session, then logged back in, its still the same. did that 3 more times and now the minecraft screen is gone and everything is acting as it should except, of course, for the session name and start time of the "new" minecraft screen. Should I just submit this as a bug for GNU screen?

Read the article
Dim (NEARLY blank) laptop screen, secondary screen works - why?

- by LIttle Ancient Forest Kami

My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

Read the article
Live CD has black screen HP DV6

- by Shaun Killingbeck

Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

Read the article
Laptop screen is cracked, external monitor only mirroring the broken laptop screen

- by user92415

I did something stupid. When my Dell Vostro 1000 laptop screen cracked and went all crazy and I couldn't see anything, I attached it to an external monitor and pressed Fn + F5 and it worked. But then I did something in the control panel that made the external screen look similar to the laptop screen. That made the external screen completely unusable too. In the control panel it was the last tab – something with "dual screens" I think. Is there anyway to reverse what did, turn off the laptop screen permanently and turn the external monitor into the primary? Remember that I can't see anything on the laptop screen. It is a complete goner – and because of what I did I can't see anything on the external monitor.

Read the article
Screen becomes black after pressing dash or alt-tab

- by cegerxwin

I did an upgrade from 11.04 to 11.10. Unity 3d becomes a black screen after pressing the dash-button or after pressing alt-tab to switch between open windows. I can see the panel on the top(lock,sound,..) and the panel on the left (launcher) but the rest is black. It looks like a maximised black window. The open Windows are active but I cant see them. I logout by pressing logout in the right top corner and pressing enter (because logout is default focused on the dialogue screen) and leave unity3d. Unity3d worked with 11.04 very good. If I press the dash button the dash looks like an 16-Bit or 8-Bit window and buttons for maximise, minimise and close are displayed and looks inverted. I have rebooted my notebook just now and log in to Unity 3D and tested some features of Unity and everything works well. The black thing is only a layer. I can use my desktop but cant see anything because of the layer, but everything works. It seems so, that a layer appear when pressing dash or alt-tab and does not disappear when close dash or choose a running app with alt-tab. you will see the necessary info related video problems: Unity support: /usr/lib/nux/unity_support_test -p OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RC410 OpenGL version string: 2.1 Mesa 7.11-devel Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes xorg glxinfo lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]

Read the article
13.10 - Black borders, black terminal

- by Eric

I've just upgraded to Ubuntu 13.10 and I'm seeing a strange behaviour. All windows I open have a black, boxy border, including popups, as you can see in the provided image. (The black box in the bottom right is a terminal, which fails to display any text. However, I can enter commands and they execute.) I followed the steps in this post: How do I reset my Unity configuration? to reset Unity using the unity-tweak-tool. Although helpful, that did not fix the issue. I'm thinking this may be a graphics card driver issue. Any help is much appreciated.

Read the article
Ubuntu stuck, goes black and comes to login screen

- by Iury Simões

I'm using normally the ubuntu, version: ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=13.10 DISTRIB_CODENAME=saucy DISTRIB_DESCRIPTION="Ubuntu 13.10" And so, for no reason, the screen goes black and come back to login screen. This not happen on login screen, like login screen infinite loop problem. I get the login and use it normally then suddenly the screen goes black. I was using Ubuntu 14 and for this problem I formatted and installed Ubuntu 13, but the problem remains.

Read the article
Black screen in installation when Nvidia graphic card plugged

- by jopasso1

When I try to install any recent version of Ubuntu, the screen shows some green and purple mess (like analog TVs when thers no signal). Then, a black screen. I guess it keeps booting in live/install mode. But I can't see it. I tried installing from CD and USB, I tryed changing some BIOS settings... I installed older versions, like 8.04, and it worked, but after updating the system, it crashes again. That's why I discovered that upgrading Nvidia drivers, made system show a black screen again. After that, I unplugged the Nvidia card and installed 12.04 with onboard card. It worked perfectly. Then, I plugged Nvidia again and system booted, but only showing that black screen again. I keep working with onboard card, so far... The nVidia is a GeForce 8500GT.

Read the article
Ubutu 14.04 triple screen, third screen black and X cursor

- by Horse

I am having some issues getting my third screen working properly. I had triple screens working fine on 12.04, using 2 nvidia cards. Did a fresh install of 14.04 and having no end of problems getting it working. It either will just be disabled, or the screen is black with the cursor as an X. I can only enable it from the nvidia server settings tool. The Ubuntu native display settings won't even show the 3rd screen. I tried copying the xorg.conf from my old install, which upon restarting X worked fine on the login screen, but then it just sat there after I logged in and didn’t do anything (mouse was still working). I am using gnome-session-fallback instead of unity if that makes any difference. Still having these issues if I try unity though. How do I get my 3rd screen working and displaying a desktop? Here is my current xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildd@roseapple) Mon Feb 3 15:07:22 UTC 2014 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: unknown, VertRefresh source: unknown Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 0.0 - 0.0 VertRefresh 0.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0" # Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" # Removed Option "SLI" "Off" # Removed Option "BaseMosaic" "off" # Removed Option "metamodes" "GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-2: nvidia-auto-select +0+0, GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-3: nvidia-auto-select +1280+0, GPU-82e96214-175e-5e6a-218c-5bdbc948daf2.DVI-I-1: nvidia-auto-select +3200+0" # Removed Option "SLI" "off" # Removed Option "BaseMosaic" "on" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "nvidia-auto-select +0+0" # Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Here is my old 'working in 12.04' xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 310.19 ([email protected]) Thu Nov 8 02:08:55 PST 2012 Section "ServerLayout" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen2" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: unknown, VertRefresh source: unknown Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "Apple Cinema HD" HorizSync 74.0 - 74.6 VertRefresh 59.9 - 60.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-2: nvidia-auto-select +1280+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0 {viewportout=1280x720+0+152}" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

Read the article
Black screen after installing ubuntu 12.04

- by neodyme

:) After installing Ubuntu 12.04 from a CD, everything goes perfectly until I restart the computer (after the installation process) im not able to see the login screen, I just get a black screen! so I press randomly keys and sometimes im able to see the background wallpaper but almost instantly the black screen appears. I think that I have to update the nVidia drivers or something like this I tried to start from the recovery mode, update my package, but still the same problem I can't start with the graphical interface as well, i get an error message 'no screen' !! I dont understand why I have this problem because before the installation im able to try ubuntu (from the cd) and works perfect. Thanks !!

Read the article
ubuntu 12.04 install black screen

- by Tara Scarborough

When I try to install Ubuntu 12.04 i get the grub 1.99 screen that allows me to select ubuntu install, or try ubuntu with out installing. When i select install ubuntu the screen goes black and i can tell the hard drive is running, but there are no on screen prompts. I looked into this problem and attempted to change a few variables by pressing "e" to edit the ubuntu install boot screen I then changed splash to nospash, quiet to noquiet, and add nomodeset at the end of the line that starts with linux before the "--". This still changes nothing when i press F10 to boot. I have tried removing quiet and splash altogether and adding nomodeset, but still to no avail. I am a little frustrated and don't know what to do. Any help would be greatly appreciated! The system is brand new - no OS: Hardware: Zotac ZBOX ZBOX-ID81-PLUS-U Nettop Computer - Intel Celeron 857 1.20 GHz - 8 GB RAM - 320 GB HDD - Intel Graphics Media Accelerator HD Graphics Card

Read the article
Blank screen after Switch User or Resume

- by matt wilkie

About half the time when I switch users or resume from standby or resume the screen goes blank (black). If I work the cursor keys I can hear the system bell when it gets to the end of the user list. I can also successfully login, going from memory, but screen stays black. Sometimes closing and re-opening the lid will light up the screen again. Pressing the special Function key to enable/disable external monitor connection has no effect [Fn]-[F5],[Fn]-[F6]. If none of the previous work I need to put the computer into hibernation or full power off to restore screen function. If I watch closely when switching users I think I can see the screen initially start to light up and then quickly fade to black. The computer is an Acer Aspire 3500, model ZL6, running Ubuntu 10.10 installed 2 days ago. No proprietary drivers are in use. I'll provide a list of hardware details as soon as I can figure out how to generate that (didn't there used to be an entry for hardware details under the System menu?). Possibly related questions: No resume after Hibernate or Standby When I resume from suspension - the screen is blank Switch user fails to complete successfully For what it's worth, blank after resume also used to happen occasionally when the laptop was running XP-Home, but nowhere near as often, perhaps 6 or 8 times a year. UPDATE: I found System Administration System Testing and ran the Monitor test. It went very very dark, but the window elements could be discerned, and the whole screen flashed (from very very dark to black). On the third repeat of that same test the screen went to full blaupck and stayed there. Moving the mouse, via touchpad, or touch keys did not wake it up again. I had to close the lid and put the computer into hibernate, and press the power button to restore it. UPDATE2: output of lshw: http://pastebin.com/q7n8676r, lspci: http://pastebin.com/6ujzVK4r UPDATE3: sometimes I can restore the screen by flipping to console 1 with ctrl-alt-F1 and then back to graphical with ctrl-alt-F7.

Read the article
My ASUS U32U with fresh Xubuntu install shows a black screen 50-80% of the startups

- by Jona Ekenberg

I have recently installed Ubuntu 12.10 with Xubuntu-package on my ASUS U32U notebook (Radeon HD 6320 GPU). The issue I have is that more often than not, after the GRUB-select screen I get a black screen, and three times total white lines (kind of) flashes very quickly (with maybe 5 seconds between each flash). I'm not even able to get to the login-screen (nor the Xubuntu loading screen). At first I thought it was simply me having installed something dumb or messed up some settings, but even after reformatting the partition and installing ubuntu again, the problem remains. Before I formatted it xfce4's window manager wouldn't start either, but it does now (when I am able to see anything). I can access the virual consoles (ctrl+alt+f1), but I can't see anything, but I've managed to shutdown the computer by using it (sudo shutdown -h now).

Read the article
Changing enum in a different class for screen

- by user2434321

I'm trying to make a start menu for my game and my code uses Enum's to moniter the screen state. Now i want to change the screenstate declared in the main class, in my Background class Screen screen = new Screen(); is declared in the Game1 class Background(ref screen); This is in the update method for the Background Class KeyboardState keystate = Keyboard.GetState(); switch (screen) { case Screen.Start: if (isPressed && keystate.IsKeyUp(Keys.Up) && keystate.IsKeyUp(Keys.Down) && keystate.IsKeyUp(Keys.Enter)) { isPressed = false; } if (keystate.IsKeyDown(Keys.Down) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Credits; if (menuState == MenuState.Play) menuState = MenuState.Options; isPressed = true; } if (keystate.IsKeyDown(Keys.Up) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Play; if (menuState == MenuState.Credits) menuState = MenuState.Options; isPressed = true; } switch (menuState) { case MenuState.Play: arrowRect.X = 450; arrowRect.Y = 220; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Play; break; case MenuState.Options: arrowRect.X = 419; arrowRect.Y = 340; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Options; break; case MenuState.Credits: arrowRect.X = 425; arrowRect.Y = 460; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Credits; break; } break; } } For some reason when I play this and I hit the enter button the Background class's screen is changed but the main class's screen isn't how can i change this? EDIT 1* class Background { private Texture2D background; private Rectangle backgroundRect; private Texture2D arrow; private Rectangle arrowRect; private Screen screen; private MenuState menuState; private bool isPressed = false; public Screen getScreenState(ref Screen screen) { this.screen = screen; return this.screen; } public Background(ref Screen screen) { this.screen = screen; } public void Update() { KeyboardState keystate = Keyboard.GetState(); switch (screen) { case Screen.Start: if (isPressed && keystate.IsKeyUp(Keys.Up) && keystate.IsKeyUp(Keys.Down) && keystate.IsKeyUp(Keys.Enter)) { isPressed = false; } if (keystate.IsKeyDown(Keys.Down) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Credits; if (menuState == MenuState.Play) menuState = MenuState.Options; isPressed = true; } if (keystate.IsKeyDown(Keys.Up) && isPressed != true) { if (menuState == MenuState.Options) menuState = MenuState.Play; if (menuState == MenuState.Credits) menuState = MenuState.Options; isPressed = true; } switch (menuState) { case MenuState.Play: arrowRect.X = 450; arrowRect.Y = 220; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Play; break; case MenuState.Options: arrowRect.X = 419; arrowRect.Y = 340; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Options; break; case MenuState.Credits: arrowRect.X = 425; arrowRect.Y = 460; if (keystate.IsKeyDown(Keys.Enter) && isPressed != true) screen = Screen.Credits; break; } break; case Screen.Pause: break; case Screen.Over: break; } } public void LoadStartContent(ContentManager Content, GraphicsDeviceManager graphics) { background = Content.Load<Texture2D>("startBackground"); arrow = Content.Load<Texture2D>("arrow"); backgroundRect = new Rectangle(0, 0, graphics.GraphicsDevice.Viewport.Width, graphics.GraphicsDevice.Viewport.Height); arrowRect = new Rectangle(450, 225, arrow.Width, arrow.Height); screen = Screen.Start; } public void LoadPlayContent(ContentManager Content, GraphicsDeviceManager graphics) { background = Content.Load<Texture2D>("Background"); backgroundRect = new Rectangle(0, 0, graphics.GraphicsDevice.Viewport.Width, graphics.GraphicsDevice.Viewport.Height); screen = Screen.Play; } public void LoadOverContent(ContentManager Content, GraphicsDeviceManager graphics) { } public void Draw(SpriteBatch spritebatch) { if (screen == Screen.Start) { spritebatch.Draw(background, backgroundRect, Color.White); spritebatch.Draw(arrow, arrowRect, Color.White); } else spritebatch.Draw(background, backgroundRect, Color.White); } } Thats my background class!

Read the article
Dead (nearly blank) laptop screen, secondary screen works - how to fix?

- by LIttle Ancient Forest Kami

My laptop screen is black while my secondary screen is fine. What I tried: setting brightness (Fn keys) - no effect, no change seen, also on secondary screen removing static electricity like suggested here - no effect restarting / charging battery, running on battery / "wall" power - no effect as well wait to see if warming it up helps - it doesn't follow official Ubuntu diagnostics - checking now... What I will try next: check last updates I've made IIRC I am running on nomodeset already, but can't recall how to verify this Further symptoms: can't see BIOS screen system loads and works fine, just screen has problems screen works (occasionally I could glimpse very dimly what was going on, but it was like with minimum brightness set - nearly non-distinguishable from just a black screen) Any ideas how to proceed best? What is most probable cause?

Read the article
Mecer laptop gives me a white screen when I close the screen

- by Dane Rossenrode

I'm having a very strange hardware issue with my Mecer m770u laptop with intel i7 quad core, etc... I'm wondering if anyone has had this issue with any other brand/model of laptop, and what I should fix/replace to solve it...? Basically when I close the screen of the laptop, the screen often goes completely white. If I open it slowly and smoothly again, the screen returns to normal. But if I close the screen when the computer is off, and then switch it on, it boots with a white screen, and opening it slowly/smoothly doesn't help. I have to then switch it on and off a few times before it returns to normal. Makes travelling with my laptop really difficult! Any suggestions?

Read the article
Using screen, commands like less and man don't clear the screen afterwards

- by Boldewyn

In contrast to this question I want the clearing of the screen re-enabled for less. It works fine in my xterm terminal under Cygwin/mintty or Gnome Terminal (both xterms). However, when inside a screen session, the clearing of the screen is somehow disabled. I tried several things, like screen -T xterm or putting the autonuke statement in my ~/.screenrc. Also, inside the screen session export TERM=xterm tset has no effect. So, now I'm out of ideas. Any help appreciated.

Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >