Search Results

Search found 47 results on 2 pages for 'daisy'.

Page 2/2 | < Previous Page | 1 2 

  • usb vs firewire for connecting two RAID 0 disks

    - by Arne
    I have a 2TB and a 4TB RAID 0 external drives (both have two physical hard drives in them). Both have a FW800, FW400, and USB port. My MacBook Pro has one FW800 port and two USB ports. I want to copy data from the 4TB drive to the 2TB drive. Is it better to A - connect both directly to the laptop, one with USB and one with FW800 or B - connect the 4TB drive to laptop with FW800 and the 2TB drive to the 4TB drive using a FW400 cable? Anyone have problems daisy-chaining RAID 0 disks using FW? Thanks!

    Read the article

  • dev_install failed on ARM chromebook

    - by user1027721
    I'm trying this guide for having access to emerge on chromeos. http://www.chromium.org/chromium-os/how-tos-and-troubleshooting/install-software-on-base-images Unfortunately I always got the same error which is $ sudo dev_install Starting installation of developer packages. First, we download the necessary files. Downloading https://commondatastorage.googleapis.com/chromeos-dev-installer/board/daisy/full-3.168.0.0/packages/app-misc/mime-types-8.tbz2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 127 100 127 0 0 252 0 --:--:-- --:--:-- --:--:-- 305 [: 184: -ne: unexpected operator Extracting /usr/local/portage/packages/app-misc/mime-types-8.tbz2 I think that it somehow returns a 404 everytime. Thanks for your help

    Read the article

  • Trying to understand why VLANs need to be created on intermediate switches

    - by Jon Reeves
    I'm currently studying for the Cisco switching exam and having trouble understanding exactly how 802.1q tagging works. Given three daisy chained switches (A,B, and C) with trunk ports between them and VLAN 101 defined on both end switches (A and C), I'm not sure why the VLAN also needs to be defined on the middle one (B)? Note that I am not disputing that it does need to be configured, I'm just trying to understand why exactly. As I understand it, traffic from VLAN 101 on switch A will be tagged as it goes through the trunk to switch B. According to the documentation I have read, trunks will pass all VLANs by default, and the .1q tag is only removed when the frame leaves through an access port on the relevant VLAN. From this I would expect switch B to simply forward the tagged frame unchanged through the trunk to switch C. Can anyone shed some light on how switch B processes this frame and why it does not get forwarded through the other trunk ?

    Read the article

  • Does a portable secondary laptop LCD monitor exist?

    - by Dougnukem
    I'm looking to buy a portable secondary LCD monitor for my Macbook Pro, does anything like that exist? I found some laptops that provide a dual 15'' monitor solution (but it's already baked into the hardware). Also some ideas posted about creating this type of setup back in 2007. I'm looking for something that is as thin as a laptop LCD (with maybe a bulky power supply that I could easily daisy chain or plug into a power strip along with my laptop). How difficult would it be to buy a 17'' laptop screen and hook up a DVI connector and power supply, and build a simple monitor stand for it? I've gotten to used to a dual-monitor setup at work and at home with my laptop that having to use my laptop in single-screen mode makes me feel crippled.

    Read the article

  • Can a MySQL slave be a master at the same time?

    - by mmattax
    I am in the process of migrating 2 DB servers (Master & Slave) to two new DB Servers (Master and Slave) DB1 - Master (production) DB2 - Slave (production) DB3 - New Master DB4 - New Slave Currently I have the replication set up as: DB1 -> DB2 DB3 -> DB4 To get the production data replicated to the new servers, I'd like to get it "daisy chained" so that it looks like this: DB1 -> DB2 -> DB3 -> DB4 Is this possible? When I run show master status; on DB2 (the production slave) the binlog possition never seems to change: +------------------+----------+--------------+------------------+ | File | Position | Binlog_Do_DB | Binlog_Ignore_DB | +------------------+----------+--------------+------------------+ | mysql-bin.000020 | 98 | | | +------------------+----------+--------------+------------------+ I'm a bit confused as to why the binlog position is not changing on DB2, Ideally it will be the master to DB3.

    Read the article

  • Dell Multi-Monitor Hub: true DisplayPort splitting?

    - by thepurplepixel
    In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks!

    Read the article

  • When Your Boss Doesn't Want you to Succeed

    - by Phil Factor
    You're working hard to get an application finished. You are programming long into the evenings sometimes, and eating sandwiches at your desk instead of taking a lunch break. Then one day you glance up at the IT manager, serene in his mysterious round of meetings, and think 'Does he actually care whether this project succeeds or not?'. The question may seem absurd. Of course the project must succeed. The truth, as always, is often far more complex. Your manager may even be doing his best to make sure you don't succeed. Why? There have always been rich pickings for the unscrupulous in IT.  In extreme cases, where administrators struggle with scarcely-comprehended technical issues, huge sums of money can be lost and gained without any perceptible results. In a very few cases can fraud be proven: most of the time, the intricacies of the 'game' are such that one can do little more than harbor suspicion.  Where does over-enthusiastic salesmanship end and fraud begin? The Business of Information Technology provides rich opportunities for White-collar crime. The poor developer has his, or her, hands full with the task of wrestling with the sheer complexity of building an application. He, or she, has no time for following the complexities of the chicanery of the management that is directing affairs.  Most likely, the developers wouldn't even suspect that their company management had ulterior motives. I'll illustrate what I mean with an entirely fictional, hypothetical, example. The Opportunist and the Aged Charities often do good, unexciting work that is funded by the income from a bequest that dates back maybe hundreds of years.  In our example, it isn't exciting work, for it involves the welfare of elderly people who have fallen on hard times.  Volunteers visit, giving a smile and a chat, and check that they are all right, but are able to spend a little money on their discretion to ameliorate any pressing needs for these old folk.  The money is made to work very hard and the charity averts a great deal of suffering and eases the burden on the state. Daisy hears the garden gate creak as Mrs Rainer comes up the path. She looks forward to her twice-weekly visit from the nice lady from the trust. She always asked ‘is everything all right, Love’. Cheeky but nice. She likes her cheery manner. She seems interested in hearing her memories, and talking about her far-away family. She helps her with those chores in the house that she couldn’t manage and once even paid to fill the back-shed with coke, the other year. Nice, Mrs. Rainer is, she thought as she goes to open the door. The trustees are getting on in years themselves, and worry about the long-term future of the charity: is it relevant to modern society? Is it likely to attract a new generation of workers to take it on. They are instantly attracted by the arrival to the board of a smartly dressed University lecturer with the ear of the present Government. Alain 'Stalin' Jones is earnest, persuasive and energetic. The trustees welcome him to the board and quickly forgive his humorless political-correctness. He talks of 'diversity', 'relevance', 'social change', 'equality' and 'communities', but his eye is on that huge bequest. Alain first came to notice as a Trotskyite union official, who insinuated himself into one of the duller Trades Unions and turned it, through his passionate leadership, into a radical, headline-grabbing organization.  Middle age, and the rise of European federal socialism, had brought him quiet prosperity and charcoal suits, an ear in the current government, and a wide influence as a member of various Quangos (government bodies staffed by well-paid unelected courtiers).  He was employed as a 'consultant' by several organizations that relied on government contracts. After gaining the confidence of the trustees, and showing a surprising knowledge of mundane processes and the regulatory framework of charities, Alain launches his plan.  The trust will expand their work by means of a bold IT initiative that will coordinate the interventions of several 'caring agencies', and provide  emergency cover, a special Website so anxious relatives can see how their elderly charges are doing, and a vastly more efficient way of coordinating the work of the volunteer carers. It will also provide a special-purpose site that gives 'social networking' facilities, rather like Facebook, to the few elderly folk on the lists with access to the internet. The trustees perk up. Their own experience of the internet is restricted to the occasional scanning of railway timetables, but they can see that it is 'relevant'. In his next report to the other trustees, Alain proudly announces that all this glamorous and exciting technology can be paid for by a grant from the government. He admits darkly that he has influence. True to his word, the government promises a grant of a size that is an order of magnitude greater than any budget that the trustees had ever handled. There was the understandable proviso that the company that would actually do the IT work would have to be one of the government's preferred suppliers and the work would need to be tendered under EU competition rules. The only company that tenders, a multinational IT company with a long track record of government work, quotes ten million pounds for the work. A trustee questions the figure as it seems enormous for the reasonably trivial internet facilities being built, but the IT Salesmen dazzle them with presentations and three-letter acronyms until they subside into quiescent acceptance. After all, they can’t stay locked in the Twentieth century practices can they? The work is put in hand with a large project team, in a splendid glass building near west London. The trustees see rooms of programmers working diligently at screens, and who talk with enthusiasm of the project. Paul, the project manager, looked through his resource schedule with growing unease. His initial excitement at being given his first major project hadn’t lasted. He’d been allocated a lackluster team of developers whose skills didn’t seem right, and he was allowed only a couple of contractors to make good the deficit. Strangely, the presentation he’d given to his management, where he’d saved time and resources with a OTS solution to a great deal of the development work, and a sound conservative architecture, hadn’t gone down nearly as big as he’d hoped. He almost got the feeling they wanted a more radical and ambitious solution. The project starts slipping its dates. The costs build rapidly. There are certain uncomfortable extra charges that appear, such as the £600-a-day charge by the 'Business Manager' appointed to act as a point of liaison between the charity and the IT Company.  When he appeared, his face permanently split by a 'Mr Sincerity' smile, they'd thought he was provided at the cost of the IT Company. Derek, the DBA, didn’t have to go to the server room quite some much as he did: but It got him away from the poisonous despair of the development group. Wave after wave of events had conspired to delay the project.  Why the management had imposed hideous extra bureaucracy to cover ISO 9000 and 9001:2008 accreditation just as the project was struggling to get back on-schedule was  beyond belief.  Then  the Business manager was coming back with endless changes in scope, sorrowing saying that the Trustees were very insistent, though hopelessly out in touch with the reality of technical challenges. Suddenly, the costs mount to the point of consuming the government grant in its entirety. The project remains tantalizingly just out of reach. Alain Jones gives an emotional rallying speech at the trustees review meeting, urging them not to lose their nerve. Sadly, the trustees dip into the accumulated capital of the trust, the seed-corn of all their revenues, in order to save the IT project. A few months later it is all over. The IT project is never delivered, even though it had seemed so incredibly close.  With the trust's capital all gone, the activities it funded have to be terminated and the trust becomes just a shell. There aren't even the funds to mount a legal challenge against the IT company, even had the trust's solicitor advised such a foolish thing. Alain leaves as suddenly as he had arrived, only to pop up a few months later, bronzed and rested, at another charity. The IT workers who were permanent employees are dispersed to other projects, and the contractors leave to other contracts. Within months the entire project is but a vague memory. One or two developers remain  puzzled that their managers had been so obstructive when they should have welcomed progress toward completion of the project, but they put it down to incompetence and testosterone. Few suspected that they were actively preventing the project from getting finished. The relationships between the IT consultancy, and the government of the day are intricate, and made more complex by the Private Finance initiatives and political patronage.  The losers in this case were the taxpayers, and the beneficiaries of the trust, and, perhaps the soul of the original benefactor of the trust, whose bid to give his name some immortality had been scuppered by smooth-talking white-collar political apparatniks.  Even now, nobody is certain whether a crime was ever committed. The perfect heist, I guess. Where’s the victim? "I hear that Daisy’s cottage is up for sale. She’s had to go into a care home.  She didn’t want to at all, but then there is nobody to keep an eye on her since she had that minor stroke a while back.  A charity used to help out. The ‘social’ don’t have the funding, evidently for community care. Yes, her old cat was put down. There was a good clearout, and now the house is all scrubbed and cleared ready for sale. The skip was full of old photos and letters, memories. No room in her new ‘home’."

    Read the article

  • xcopy file, suppress &ldquo;Does xxx specify a file name&hellip;&rdquo; message

    - by MarkPearl
    Today we had an interesting problem with file copying. We wanted to use xcopy to copy a file from one location to another and rename the copied file but do this impersonating another user. Getting the impersonation to work was fairly simple, however we then had the challenge of getting xcopy to work. The problem was that xcopy kept prompting us with a prompt similar to the following… Does file.xxx specify a file name or directory name on the target (F = file, D = directory)? At which point we needed to press ‘Y’. This seems to be a fairly common challenge with xcopy, as illustrated by the following stack overflow link… One of the solutions was to do the following… echo f | xcopy /f /y srcfile destfile This is fine if you are running from the command prompt, but if you are triggering this from c# how could we daisy chain a bunch of commands…. The solution was fairly simple, we eventually ended up with the following method… public void Copy(string initialFile, string targetFile) { string xcopyExe = @"C:\windows\system32\xcopy.exe"; string cmdExe = @"C:\windows\system32\cmd.exe"; ProcessStartInfo p = new ProcessStartInfo(); p.FileName = cmdExe; p.Arguments = string.Format(@"/c echo f | {2} {0} {1} /Y", initialFile, targetFile, xcopyExe); Process.Start(p); } Where we wrapped the commands we wanted to chain as arguments and instead of calling xcopy directly, we called cmd.exe passing xcopy as an argument.

    Read the article

  • Regular Expressions Cookbook Ebook Deal of the Day

    - by Jan Goyvaerts
    Every day O’Reilly has an “ebook deal of the day” offering one or a bunch of their books in electronic format for only $9.99. Twice this year I received an email from O’Reilly notifying me that Regular Expressions Cookbook was on sale. But each time the email was sent on the morning of the day itself. When it’s morning in California it’s already bedtime for me here in Thailand. So I never saw the emails until the next day, making it rather pointless to blog about the deal. But this time O’Reilly has listened to my request for advance notification. I just got an email this morning saying Regular Expressions Cookbook will be part of the Ebook Deal of the Day for 15 September 2010. That’s 15 September on the US west coast. When I write this there’s a few hours to go before the deal starts at one past midnight California time. You can get any O’Reilly Cookbook as an ebook for only $9.99. The normal price for Regular Expressons Cookbook as an ebook is $31.99. The download includes the book in PDF, ePub, Mobi (for Kindle), DAISY, and Android formats.

    Read the article

  • to Imagemagick PHP exec

    - by Erik Smith
    I found a very helpful post on here about cropping images in a circle. However, when I try to execute the imagemagick script using exec in PHP, I'm getting no results. I've checked to make sure the directories have the correct permissions and such. Is there a step I'm missing? Any insight would be much appreciated. Here's what my script looks like: $run = exec('convert -size 200x200 xc:none -fill daisy.jpg -draw "circle 100,100 100,1" uploads/new.png'); Edit: Imagemagick is installed.

    Read the article

  • Getting past Salesforce trigger governors

    - by Jake
    I'm trying to write an "after update" trigger that does a batch update on all child records of the record that has just been updated. This needs to be able to handle 15k+ child records at a time. Unfortunately, the limit appears to be 100, which is so far below my needs it's not even close to acceptable. I haven't tried splitting the records into batches of 100 each, since this will still put me at a cap of 10k updates per trigger execution. (Maybe I could just daisy-chain triggers together? ugh.) Does anyone know what series of hoops I can jump through to overcome yet another ridiculously short-sighted limitation by this awful development "platform"?

    Read the article

  • OWB 11gR2 &ndash; Flexible and extensible

    - by David Allan
    The Oracle data integration extensibility capabilities are something I love, nothing more frustrating than a tool or platform that is very constraining. I think extensibility and flexibility are invaluable capabilities in the data integration arena. I liked Uli Bethke's posting on some extensibility capabilities with ODI (see Nesting ODI Substitution Method Calls here), he has some useful guidance on making customizations to existing KMs, nice to learn by example. I thought I'd illustrate the same capabilities with ODI's partner OWB for the OWB community. There is a whole new world of potential. The LKM/IKM/CKM/JKMs are the primary templates that are supported (plus the Oracle Target code template), so there is a lot of potential for customizing and extending the product in this release. Enough waffle... Diving in at the deep end from Uli's post, in OWB the table operator has a number of additional properties in OWB 11gR2 that let you annotate the column usage with ODI-like properties such as the slowly changing usage or for your own user-defined purpose as in Uli's post, below you see for the target table SALES_TARGET we can use the UD5 property which when assigned the code template (knowledge module) which has been modified with Uli's change we can do custom things such as creating indices - provides The code template used by the mapping has the additional step which is basically the code illustrated from Uli's posting just used directly, the ODI 10g substitution references also supported from within OWB's runtime. Now to see whether this does what we expect before we execute it, we can check out the generated code similar to how the traditional mapping generation and preview works, you do this by clicking on the 'Inspect Code' button on the execution units code template assignment. This then  creates another tab with prefix 'Code - <mapping name>' where the generated code is put, scrolling down we find the last step with the indices being created, looks good, so we are ready to deploy and execute. After executing the mapping we can then use the 'Audit Information' panel (select the mapping in the designer tree and click on View/Audit Information), this gives us a view of the execution where we can drill into the tasks that were executed and inspect both the template and the generated code that was executed and any potential errors. Reflecting back on earlier versions of OWB, these were the kinds of features that were always highly desirable, getting under the hood of the code generation and tweaking bit and pieces - fun and powerful stuff! We can step it up a bit here and explore some further ideas. The example below is a daisy-chained set of execution units where the intermediate table is a target of one unit and the source for another. We want that table to be a global temporary table, so can tweak the templates. Back to the copy of SQL Control Append (for demo purposes) we modify the create target table step to make the table a global temporary table, with the option of on commit preserve rows. You can get a feel for some of the customizations and changes possible, providing some great flexibility and extensibility for the data integration tools.

    Read the article

  • Class Design -- Multiple Calls from One Method or One Call from Multiple Methods?

    - by Andrew
    I've been working on some code recently that interfaces with a CMS we use and it's presented me with a question on class design that I think is applicable in a number of situations. Essentially, what I am doing is extracting information from the CMS and transforming this information into objects that I can use programatically for other purposes. This consists of two steps: Retrieve the data from the CMS (we have a DAL that I use, so this is essentially just specifying what data from the CMS I want--no connection logic or anything like that) Map the parsed data to my own [C#] objects There are basically two ways I can approach this: One call from multiple methods public void MainMethodWhereIDoStuff() { IEnumerable<MyObject> myObjects = GetMyObjects(); // Do other stuff with myObjects } private static IEnumerable<MyObject> GetMyObjects() { IEnumerable<CmsDataItem> cmsDataItems = GetCmsDataItems(); List<MyObject> mappedObjects = new List<MyObject>(); // do stuff to map the CmsDataItems to MyObjects return mappedObjects; } private static IEnumerable<CmsDataItem> GetCmsDataItems() { List<CmsDataItem> cmsDataItems = new List<CmsDataItem>(); // do stuff to get the CmsDataItems I want return cmsDataItems; } Multiple calls from one method public void MainMethodWhereIDoStuff() { IEnumerable<CmsDataItem> cmsDataItems = GetCmsDataItems(); IEnumerable<MyObject> myObjects = GetMyObjects(cmsDataItems); // do stuff with myObjects } private static IEnumerable<MyObject> GetMyObjects(IEnumerable<CmsDataItem> itemsToMap) { // ... } private static IEnumerable<CmsDataItem> GetCmsDataItems() { // ... } I am tempted to say that the latter is better than the former, as GetMyObjects does not depend on GetCmsDataItems, and it is explicit in the calling method the steps that are executed to retrieve the objects (I'm concerned that the first approach is kind of an object-oriented version of spaghetti code). On the other hand, the two helper methods are never going to be used outside of the class, so I'm not sure if it really matters whether one depends on the other. Furthermore, I like the fact that in the first approach the objects can be retrieved from one line-- most likely anyone working with the main method doesn't care how the objects are retrieved, they just need to retrieve the objects, and the "daisy chained" helper methods hide the exact steps needed to retrieve them (in practice, I actually have a few more methods but am still able to retrieve the object collection I want in one line). Is one of these methods right and the other wrong? Or is it simply a matter of preference or context dependent?

    Read the article

  • Looking for a real DisplayPort hub/splitter

    - by squircle
    In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks! Edit: I've checked out the similar-looking Cirago DisplayPort splitter, but I have extreme doubts as to whether or not it's a genuine displayport splitter, or just another monitor-conglomerate. Their DVI solution looks identical to Dell's, which I'm pretty sure won't do what I want. I also don't want to order this DisplayPort "hub" and find that it doesn't do what I want it to.

    Read the article

  • Port mirroring on multiple switches

    - by Matt
    So here is the deal, I have a server on switch A where port 3 is monitoring traffic for most of the ports on switch A. However I have other users on switch B that needs to have port 3 on switch A monitor as well. Is this possible? I have been reading about rspan but doesnt seem to work. Switch A: monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 (this works great for switch A, I need a solution to get switch B to also have some ports sent to port 3 on switch A for monitoring.) Onxx, All the traffic on switch A is fine, there will be about 10-15 ports on switch B that I need to send to fa0/3 on switch A as the destination. I have the switches connected with a ethernet cable with a trunk port on both switches on port 48 on switch B and A and port 47 on A connects to our sonicwall. So I am assuming they are daisy chained? What if I did the following: Switch A monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 Put all of the ports on vlan 10 because I made an rspan vlan 10 On switch B monitor the ports I need will say 1-10 monitor session 1 source interface fast0/1 - 10 monitor session 1 destination remote vlan 10 as a prerequisite I would have created vlan 10 as a rspan vlan on switch B. Switch A Monitor session 1 destination remote vlan 10 Would this work? By the way I am working with cisco catalyst 3560 switches.

    Read the article

  • Using 3G/UMTS in Mauritius

    After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

    Read the article

  • Why collection literals ?

    - by Green Hyena
    Hi fellow Java programmers. From the various online articles on Java 7 I have come to know that Java 7 will be having collection literals like the following: List<String> fruits = [ "Apple", "Mango", "Guava" ]; Set<String> flowers = { "Rose", "Daisy", "Chrysanthemum" }; Map<Integer, String> hindiNums = { 1 : "Ek", 2 : "Do", 3 : "Teen" }; My questions are: 1] Wouldn't it have been possible to provide a static method of in all of the collection classes which could be used as follows: List<String> fruits = ArrayList.of("Apple", "Mango", "Guava"); IMO this looks as good as the literal version and is also reasonably concise. Why then did they have to invent a new syntax? 2] When I say List<String> fruits = [ "Apple", "Mango", "Guava" ]; what List would I actually get? Would it be ArrayList or LinkedList or something else? Thanks.

    Read the article

  • jquery autosuggest: what is wrong with this code?

    - by Abu Hamzah
    i have been struggling to make it work my autosugest/autocomplete and its acting strange unless i am doing completely silly here. please have a look 1) does not do anything, does not work or nor fire the event. <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.autocomplete.js" type="text/javascript"></script> <form id="form1" runat="server"> <script type="text/javascript"> $(document).ready(function() { $("#<%=txtHost.UniqueID %>").autocomplete("HostService.asmx/GetHosts", { dataType: 'json' , contentType: "application/json; charset=utf-8" , parse: function(data) { var rows = Array(); debugger for (var i = 0; i < data.length; i++) { rows[i] = { data: data[i], value: data[i].LName, result: data[i].LName }; } return rows; } , formatItem: function(row, i, max) { return data.LName + ", " + data.FName; } }); }); </script> 2) this works if i remove the above code and replace with this code: <script type="text/javascript"> $(document).ready(function() { $("#txtHost").autocomplete("lazy blazy crazy daisy maisy ugh".split(" ")); }); </script> any help ?

    Read the article

  • my multi boot can't boot to XP 'resumeobject' is missing

    - by GwenKillerby
    In my multi boot set up, booting to vista and 7 goes fine, but when I try to boot to XP, i get an error Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \NTLDR Status: 0xc000000e Info: The selected entry could not be loaded because the application is missing or corrupt. See below. Clearly the resumeobject seems to be missing in the XP entry ("Real Mode Boot sector"), only I don't know how to restore it. Vista is on **C:**, Win7 is on **F:** (as is the bootmgr ??? ) and WinXP is on **E:** What I've tried: [1] I've used about 5 windows discs, that is the Recovery Consoles from real XP install CD's and 3 virtual Recovery Consoles. All failed. The real CD's work ONE time, but won't let me finish, I only got as far as [b]fixboot E:[/b] Then they shut the laptop down, I kid you not. On a next startup, all 5 CD's ask me for some Admin password that I've never added! [2] I have VisualBCD and EasyBCD, but the most obvious things I tried there didn't solve the problem. So know I don't exactly know what to do with them. [3] I CAN boot into XP with the FIX NTLDR workaround of http://milescomer.com/tinyempire.com/notes/ntldrismissing.htm, but it doesn't fix it permanently QUESTION: How do I fix it permanently? bcdedit /enum output: Windows Boot Manager -------------------- identifier {bootmgr} device partition=F: path \bootmgr description Windows Boot Manager locale en-US default {current} displayorder {current} {812e27a9-27b7-11e4-8fb4-dfa8174ae8dc} {812e27ac-27b7-11e4-8fb4-dfa8174ae8dc} timeout 30 resume No Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Vista locale nl-NL osdevice partition=C: systemroot \Windows resumeobject {73d8b5bc-2764-11e4-b181-806e6f6e6963} Windows Boot Loader ------------------- identifier {812e27a9-27b7-11e4-8fb4-dfa8174ae8dc} device partition=F: path \Windows\system32\winload.exe description Daisy Etta locale en-US osdevice partition=F: systemroot \Windows resumeobject {b8c234a4-27b0-11e4-b8b3-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {812e27ac-27b7-11e4-8fb4-dfa8174ae8dc} device partition=E: path \NTLDR description XP Thank you.

    Read the article

  • WiX unresolved reference error

    - by David
    I'm using Wix version 3.0.5419.0. I have two .wxs files, one which is a fragment, and another which uses the fragment to create the .msi file. Here is the file which uses the fragment (DaisyFarmer.wxs): <?xml version='1.0' encoding='windows-1252'?> <Wix xmlns='http://schemas.microsoft.com/wix/2006/wi' xmlns:iis='http://schemas.microsoft.com/wix/IIsExtension'> <Product Name='Daisy Web Site 1.0' Id='BB7FBBE4-0A25-4cc7-A39C-AC916B665220' UpgradeCode='8A5311DE-A125-418f-B0E1-5A30B9C667BD' Language='1033' Codepage='1252' Version='1.0.0' Manufacturer='the man'> <Package Id='5F341544-4F95-4e01-A2F8-EF74448C0D6D' Keywords='Installer' Description="desc" Manufacturer='the man' InstallerVersion='100' Languages='1033' Compressed='yes' SummaryCodepage='1252' /> <Media Id='1' Cabinet='Sample.cab' EmbedCab='yes' DiskPrompt="CD-ROM #1" /> <Property Id='DiskPrompt' Value="the man" /> <PropertyRef Id="NETFRAMEWORK35"/> <Condition Message='This setup requires the .NET Framework 3.5.'> <![CDATA[Installed OR (NETFRAMEWORK35)]]> </Condition> <Feature Id='DaisyFarmer' Title='DaisyFarmer' Level='1'> <ComponentRef Id='SchedulerComponent' /> </Feature> </Product> </Wix> The fragment I'm referencing is (Scheduler.wxs): <?xml version="1.0" encoding="utf-8"?> <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"> <Fragment> <DirectoryRef Id="TARGETDIR"> <Directory Id="dir2787390E4B7313EB8005DE08108EFEA4" Name="scheduler"> <Component Id="SchedulerComponent" Guid="{9254F7E1-DE41-4EE5-BC0F-BA668AF051CB}"> <File Id="fil9A013D0BFB837BAC71FED09C59C5501B" KeyPath="yes" Source="SourceDir\DTBookMonitor.exe" /> <File Id="fil4F0D8D05F53E6AFBDB498E7C75C2D98F" KeyPath="no" Source="SourceDir\DTBookMonitor.exe.config" /> <File Id="filF02F4686267D027CB416E044E8C8C2FA" KeyPath="no" Source="SourceDir\monitor.bat" /> <File Id="fil05B8FF38A3C85FE6C4A58CD6FDFCD2FB" KeyPath="no" Source="SourceDir\output.txt" /> <File Id="fil397F04E2527DCFDF7E8AC1DD92E48264" KeyPath="no" Source="SourceDir\pipelineOutput.txt" /> <File Id="fil83DFACFE7F661A9FF89AA17428474929" KeyPath="no" Source="SourceDir\process.bat" /> <File Id="fil2809039236E0072642C52C6A52AD6F2F" KeyPath="no" Source="SourceDir\README.txt" /> </Component> </Directory> </DirectoryRef> </Fragment> </Wix> I then run the following commands: candle -ext WixUtilExtension -ext WiXNetFxExtension DaisyFarmer.wxs Scheduler.wxs light -sice:ICE20 -ext WixUtilExtension -ext WiXNetFxExtension Scheduler.wixobj DaisyFarmer.wixobj -out DaisyFarmer.msi I'm getting an error when I run light.exe which says "DaisyFarmer.wxs(20) : error LGHT0094 : Unresolved reference to symbol 'Component:SchedulerComponent' in section 'Product:{BB7FBBE4-0A25-4CC7-A39C-AC916B665220}'." What am I missing?

    Read the article

  • MSCC: Scripting - Administrator's­ toolbox of magic...

    Finally, we made it to have our April meetup - in May. The most obvious explanation is the increased amount of open source and IT activities that either the MSCC, the Linux User Group of Mauritius (LUGM), or the University of Mauritius Student's Computer Club is organising. It's absolutely incredible to see the recent hype of events here on the island. And I'm loving it! Unfortunately, we also had to deal with arranging for a location this time. It was kind of an odyssey as my requests (and phone calls) haven't been answered, even though I tried it several times - well, kind of disappointing and I have to look into that for future gatherings. In my opinion, it is essential that two parameters of a community meeting are fixed as early as possible: Location, and Date and time You can't just change one or both on the very last minute. Well, this time we had to do it due to unforeseen reasons, and I apologise to any MSCC member which couldn't make it to our April meetup. Okay, lesson learned but now back to the actual meetup report ... Shortly after the meeting I placed the following statement as my first impression: "Spontaneous and improvised :) No, seriously, Ish and Dan had well prepared presentations on shell scripting, mainly focused towards Bourne Again Shell (bash), and the pros and cons of scripting versus actually writing something in a decent programming language. I thought that I could cut myself out of the equation but the demand for information about PowerShell was higher than expected..." Well, it turned out that the interest in Windows PowerShell was high, as I even got a couple of questions on it via social media networks during the evening. I also like to mention that the number of attendees went back to what I would call a "standard" number of participation. This time there were 12 craftsmen, but again a good number of First Timers. Reactions of other attendees Here are some impressions and feedback from our participants: "Enjoyed the bash and powershell (linux / windows) presentations ..." -- Nadim on event comments "He [Daniel] also showed us some syntax loopholes in Bash that could leave someone with bad code." -- Ish on MSCC – Let's talk about Scripting   Glad to see a couple of first time attendees, especially students from the university itself. Some details on the presentations MSCC: First time visit at the University of Mauritius - Phase II Engineering Tower, room 2.9 Gimme some love ... bash and other shells Ish gave a great introduction into shell scripting as he spoke about existing shell environments and a little bit about their history. Furthermore, he talked about various built-in commands, the use of coreutils, the ability to daisy-chain multiple commands using pipes, the importance of the standard I/O streams and their file descriptors in advanced scripting techniques. Combined with a couple of sample statements in the Linux terminal on Ubuntu 14.04 machine it was a solid presentation. Have a closer look at his slides - published on his blog on MSCC – Let's talk about Scripting. Oddities of scripting After the brief introduction into bash it was Daniel's turn to highlight a good number of oddities when working with shell scripts. First of all, it should be clear that scripting is not supposed for any kind of implementations in terms of software but simply to automate administrative procedures and to simplify routine jobs on a system. One of the cool oddities that he mentioned is that everything (!) in a shell is represented by strings; there are no other types like integer, float, date-time, etc. that you'd like to use in a full-fledged programming language. Let's have a look at his sample:  more to come... What's the output? As a conclusion, Daniel suggests that shell scripting should be limited but not restricted to automatic repetitive command stacks and batch jobs, startup wrapper for applications in order to set up the execution environment, and other not too sophisticated jobs. But as soon as it might involve a little bit more logic or you might rely on performance it's better to write an application in Ruby, Python, or Perl (among others of course). This is also enables the possibility to test your code properly. MSCC: Ish talking about Bourne Again Shell (bash) and shell scripting to automate regular tasks MSCC: Daniel gives an overview about the pros and cons of shell scripting versus programming MSCC: PowerShell as your scripting solution on Windows operating systems The path of the Enlightened is long ... and tough. Honestly, even though PowerShell was mentioned without any further details on the meetup's agenda, I didn't expect that there would be demand to give a presentation on Microsoft PowerShell after all. I already took this topic out of the announcement but the audience wanted to have some information. Okay, then let's see what I could do - improvised style. While my machine booted and got hooked up to the projector, I started to talk about the beginnings of PowerShell from back in 2006, and its predecessors MS DOS and Command Prompt. A throwback in history... always good for young people. As usual, Microsoft didn't get it at that time. Instead of listening to their client's needs and demands they ignored the feasibility to administrate Windows server farms without any UI tools. PowerShell is actually a result of this, and seeing that shell scripting is a common, reliable and fast way in an administrator's toolbox for decades, Microsoft had to adapt from their Microsoft Management Console (MMC) to a broader approach. It's not like shell scripting was something new; it is in daily use by alternative operating systems like AIX, HP UX, Solaris, and last but not least Linux. Most interestingly, Microsoft is very good at renovating existing architectures, and over the years PowerShell not only replaced their own combination of Command Prompt and Scripting Hosts (VBScript and CScript) but really turned into a challenging competitor on the market. The shell is easy to extend with cmdlets, and open to other Microsoft products like SQL Server, SharePoint, as well as Third-party software applications. Similar to MMC PowerShell also offers the ability to administer other machine remotely - only without a graphical user interface and therefore it's easier to automate and schedule regular tasks. Following is a sample of a PowerShell script file (extension .ps1): $strComputer = "." $colItems = get-wmiobject -class Win32_BIOS -namespace root\CIMV2 -comp $strComputer foreach ($objItem in $colItems) {write-host "BIOS Characteristics: " $objItem.BiosCharacteristicswrite-host "BIOS Version: " $objItem.BIOSVersionwrite-host "Build Number: " $objItem.BuildNumberwrite-host "Caption: " $objItem.Captionwrite-host "Code Set: " $objItem.CodeSetwrite-host "Current Language: " $objItem.CurrentLanguagewrite-host "Description: " $objItem.Descriptionwrite-host "Identification Code: " $objItem.IdentificationCodewrite-host "Installable Languages: " $objItem.InstallableLanguageswrite-host "Installation Date: " $objItem.InstallDatewrite-host "Language Edition: " $objItem.LanguageEditionwrite-host "List Of Languages: " $objItem.ListOfLanguageswrite-host "Manufacturer: " $objItem.Manufacturerwrite-host "Name: " $objItem.Namewrite-host "Other Target Operating System: " $objItem.OtherTargetOSwrite-host "Primary BIOS: " $objItem.PrimaryBIOSwrite-host "Release Date: " $objItem.ReleaseDatewrite-host "Serial Number: " $objItem.SerialNumberwrite-host "SMBIOS BIOS Version: " $objItem.SMBIOSBIOSVersionwrite-host "SMBIOS Major Version: " $objItem.SMBIOSMajorVersionwrite-host "SMBIOS Minor Version: " $objItem.SMBIOSMinorVersionwrite-host "SMBIOS Present: " $objItem.SMBIOSPresentwrite-host "Software Element ID: " $objItem.SoftwareElementIDwrite-host "Software Element State: " $objItem.SoftwareElementStatewrite-host "Status: " $objItem.Statuswrite-host "Target Operating System: " $objItem.TargetOperatingSystemwrite-host "Version: " $objItem.Versionwrite-host} Which gives you information about your BIOS and Windows OS. Then change the computer name to another one on your network (NetBIOS based) and run the script again. There lots of samples and tutorials at the Microsoft Script Center, and I would advise you to pay a visit over there if you are more interested in PowerShell. The Script Center provides the download links, too. Upcoming Events What are the upcoming events here in Mauritius? So far, we have the following ones (incomplete list as usual) in chronological order: Hacking Defence (14. May 2014) WebCup Maurice (7. & 8. June 2014) Developers Conference (TBA ~ July 2014) Linuxfest 2014 (TBA ~ November 2014) Hopefully, there will be more announcements during the next couple of weeks and months. If you know about any other event, like a bootcamp, a code challenge or hackathon here in Mauritius, please drop me a note in the comment section below this article. Thanks! My resume of the day Spontaneous and improvised :) The new location at the University of Mauritius turned out very well, there is plenty of space, and it could be a good choice for future meetings. Especially, having the ability to get more and more students into our IT community sounds like a great opportunity. Later during the day, I got some promising mails from Nadim regarding future sessions at the local branch of the Middlesex University. Well, we will see in the future... But for now this will be on hold until approximately October when students resume their regular studies. Anyway, it was a good experience at the university, and thanks again to the UoM Student's Computer Club that made the necessary arrangements for the MSCC!

    Read the article

  • Organizations &amp; Architecture UNISA Studies &ndash; Chap 7

    - by MarkPearl
    Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

    Read the article

< Previous Page | 1 2