Search Results

Search found 51 results on 3 pages for 'dialup'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• Sharing serial port (Modem protocol + dialer)

  - by debita

  Hi, I wanted to use this code to send archives with Xmodem: http://www.java2s.com/Code/Java/Network-Protocol/JModemsimplecommunicationsprogram.htm In this case, I want to establish a dialup connection between two computers and send a binary file. But this code doesn't let me set a phone number to dial after i setup the port and before I transfer the file. Is there any way of sharing the port with another application that dials the phone number?

  Read the article

• Are binary protocols dead?

  - by Earlz

  It seemed like there use to be way more binary protocols because of the very slow internet speeds of the time (dialup). I've been seeing everything being replaced by HTTP and SOAP/REST/XML. Why is this? Are binary protocols really dead or are they just less popular? Why would they be dead or less popular?

  Read the article

• How to configure VPN in Windows XP

  - by SAMIR BHOGAYTA

  VPN Overview A VPN is a private network created over a public one. It’s done with encryption, this way, your data is encapsulated and secure in transit – this creates the ‘virtual’ tunnel. A VPN is a method of connecting to a private network by a public network like the Internet. An internet connection in a company is common. An Internet connection in a Home is common too. With both of these, you could create an encrypted tunnel between them and pass traffic, safely - securely. If you want to create a VPN connection you will have to use encryption to make sure that others cannot intercept the data in transit while traversing the Internet. Windows XP provides a certain level of security by using Point-to-Point Tunneling Protocol (PPTP) or Layer Two Tunneling Protocol (L2TP). They are both considered tunneling protocols – simply because they create that virtual tunnel just discussed, by applying encryption. Configure a VPN with XP If you want to configure a VPN connection from a Windows XP client computer you only need what comes with the Operating System itself, it's all built right in. To set up a connection to a VPN, do the following: 1. On the computer that is running Windows XP, confirm that the connection to the Internet is correctly configured. • You can try to browse the internet • Ping a known host on the Internet, like yahoo.com, something that isn’t blocking ICMP 2. Click Start, and then click Control Panel. 3. In Control Panel, double click Network Connections 4. Click Create a new connection in the Network Tasks task pad 5. In the Network Connection Wizard, click Next. 6. Click Connect to the network at my workplace, and then click Next. 7. Click Virtual Private Network connection, and then click Next. 8. If you are prompted, you need to select whether you will use a dialup connection or if you have a dedicated connection to the Internet either via Cable, DSL, T1, Satellite, etc. Click Next. 9. Type a host name, IP or any other description you would like to appear in the Network Connections area. You can change this later if you want. Click Next. 10. Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next. 11. You may be asked if you want to use a Smart Card or not. 12. You are just about done, the rest of the screens just verify your connection, click Next. 13. Click to select the Add a shortcut to this connection to my desktop check box if you want one, if not, then leave it unchecked and click finish. 14. You are now done making your connection, but by default, it may try to connect. You can either try the connection now if you know its valid, if not, then just close it down for now. 15. In the Network Connections window, right-click the new connection and select properties. Let’s take a look at how you can customize this connection before it’s used. 16. The first tab you will see if the General Tab. This only covers the name of the connection, which you can also rename from the Network Connection dialog box by right clicking the connection and selecting to rename it. You can also configure a First connect, which means that Windows can connect the public network (like the Internet) before starting to attempt the ‘VPN’ connection. This is a perfect example as to when you would have configured the dialup connection; this would have been the first thing that you would have to do. It's simple, you have to be connected to the Internet first before you can encrypt and send data over it. This setting makes sure that this is a reality for you. 17. The next tab is the Options Tab. It is The Options tab has a lot you can configure in it. For one, you have the option to connect to a Windows Domain, if you select this check box (unchecked by default), then your VPN client will request Windows logon domain information while starting to work up the VPN connection. Also, you have options here for redialing. Redial attempts are configured here if you are using a dial up connection to get to the Internet. It is very handy to redial if the line is dropped as dropped lines are very common. 18. The next tab is the Security Tab. This is where you would configure basic security for the VPN client. This is where you would set any advanced IPSec configurations other security protocols as well as requiring encryption and credentials. 19. The next tab is the Networking Tab. This is where you can select what networking items are used by this VPN connection. 20. The Last tab is the Advanced Tab. This is where you can configure options for configuring a firewall, and/or sharing. Connecting to Corporate Now that you have your XP VPN client all set up and ready, the next step is to attempt a connection to the Remote Access or VPN server set up at the corporate office. To use the connection follow these simple steps. To open the client again, go back to the Network Connections dialog box. 1. One you are in the Network Connection dialog box, double-click, or right click and select ‘Connect’ from the menu – this will initiate the connection to the corporate office. 2. Type your user name and password, and then click Connect. Properties bring you back to what we just discussed in this article, all the global settings for the VPN client you are using. 3. To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect” Summary In this article we covered the basics of building a VPN connection using Windows XP. This is very handy when you have a VPN device but don’t have the ‘client’ that may come with it. If the VPN Server doesn’t use highly proprietary protocols, then you can use the XP client to connect with. In a future article I will get into the nuts and bolts of both IPSec and more detail on how to configure the advanced options in the Security tab of this client. 678: The remote computer did not respond. 930: The authentication server did not respond to authentication requests in a timely fashion. 800: Unable to establish the VPN connection. 623: The system could not find the phone book entry for this connection. 720: A connection to the remote computer could not be established. More on : http://www.windowsecurity.com/articles/Configure-VPN-Connection-Windows-XP.html

  Read the article

• How do I stop apps trying to use a dial-up connection?

  - by ProfKaos

  Every now and again, I might have to use a dial-up internet connection via another tethered phone, i.e. Bluetooth connection to the GPRS modem. Now I am back on 'ops normal', i.e. using a shared internet connection on my own phone, or on my 3G stick, but some apps, especially IE9, keep popping up a 'dialup connection' dialogue, which I cannot dismiss enough times ever, to make to stay away. How can I tell these idiot applications that I no longer need a dial-up connection?

  Read the article

• How share internet connection between two laptops

  - by danielgratzz

  I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

  Read the article

• How to route HyperV VMs traffic through host VPN

  - by Random

  I'm using Windows 8.1 Pro with HyperV. I have several VMs for development, all of them connected with host via Internal adapter using network addresses: 192.168.10.0/24 Where: 192.168.10.1 is my host's Hyper-V internal NIC address. When I'm not in my office I use 3G usb dongle an dialup VPN connection. I would like to route traffic from all existing and future VMs through the VPN. In best scenario traffic would be routed only partially to the local company network addresses 10.1.1.0/24 I don't want to use sharing because I'm switching between WiFi, USB 3G dongle and VPN. Moving to other virtualization is also not an option for me.

  Read the article

• IE and Chrome won't browse the internet on dial up but firefox will. How could I fix it?

  - by Kelbizzle

  First let me say I've done plenty of troubleshooting and will try to explain as clearly and as much as I can. Please bear with me. I have a client's computer who uses dial-up and Windows XP. The problem is when I connect to the dial up ISP. IE or Chrome will not browse the internet. It says page cannot be displayed. but if I use firefox on the dialup connection it works. Sounds simple enough there has got to be something wrong with the proxy settings or something...well, that's what I thought here is the weird part. When connected to the LAN in my office IE, Chrome, and FF all work. I upgraded to ie8 and the issue still happens. How would you go about troubleshooting this issue? What should I do next?

  Read the article

• IOException opening RFCOMM on openSUSE

  - by Chief A-G

  I have a permissions problem on openSUSE with Bluetooth /dev/rfcomm0. I've written a small test application which opens /dev/rfcomm0 and sends a request message and retrieves a response message. At first my problem was a permission denied error on /dev/rfcomm0 until I added the user account to the dialup users group. Now I get a System.IO.IOException Interrupted system call error whenever I run the app. I can sudo my application and it runs fine. I'm not sure how and which permissions to set to get this work work under my normal user account.

  Read the article

• Is a "Soft Modem" (i.e. internal) really going to cause incompatibilities?

  - by Farseeker

  Thanks to the fact that our banking industry in Australia... outdated (which is the politest word I could think of when describing the banking industry)... to do a certain kind of transaction our bank requires us to use a dialup modem and send serial data to them. When reading through their documentation (last update: 1995), they state that any "Soft Modems" (by which I assume they mean internal modems, as they refer to a AMR socket on a motherboard, which I haven't seen in donkeys years) should not be used because of "possible incompatibilities" Seeing as buying an external, serial-port modem is actually quite expensive these days and I have a whole box of PCI modems taken out of a bunch of Dells I really don't want to have to buy an external modem. Additionally I think their documentation is simply outdated. Has anyone had experience with internal modems causing issues, where an external modem didn't?

  Read the article

• Why my Network Connection Properties don't show UAC prompt & settings change everytime I connect?

  - by Manish Shrivastaw

  I can't set my network connection interface properties, UAC prompt doesn't appear anymore for only this adapter interface. I disable Netbios but each time I connect it changes back to default. Earlier I could set & forget easily as UAC prompt showed for this dialup 3G connection. It's very frustrating to change settings every time. Is there any way to make adapter interface 'blacklisted' (remove from UAC whitelist) again. I can manually make a connection (that shows Uac prompt) but my dialler app doesn't work with that. Is there any registry entry for setting privilege for Napagent etc. Or what could be the reason, please guide. All I want is to set my connection properties (Tcp advanced settings) which won't change.

  Read the article

• The Cloud is STILL too slow!

  - by harry.foxwell(at)oracle.com

  If you've been in the computing industry sufficiently long enough to remember dialup modems and other "ancient" technologies, you might be tempted to marvel at today's wonderfully powerful multicore PCs, ginormous disks, and blazingly fast networks.  Wow, you're in Internet Nirvana, right!  Well, no, not by a long shot.Considering the exponentially growing expectations of what the Web, that is, "the Cloud", is supposed to provide, today's Web/Cloud services are still way too slow.Already we are seeing cloud-enabled consumer devices that are stressing even the most advanced public network services.  Like the iPad and its competitors, ever more powerful smart-phones, and an imminent hoard of special purpose gadgets such as the proposed "cloud camera" (see http://gdgt.com/discuss/it-time-cloud-camera-found-out-cnr/ ).And at the same time that the number and type of cloud services are growing, user tolerance for even the slightest of download delays is rapidly decreasing.  Ten years ago Web developers followed the "8-Second Rule", (average time a typical Web user would tolerate for a page to download and render).  Not anymore; now it's less than 3 seconds, and only a bit longer for mobile devices (see http://www.technologyreview.com/files/54902/GoogleSpeed_charts.pdf).  How spoiled we've become!Google, among others, recognizes this problem and is working to encourage the development of a faster Web (see http://www.technologyreview.com/web/32338/). They, along with their competitors and ISPs, will have to encourage and support significantly better Web performance in order to provide the types of services envisioned for the Cloud.  How will they do this? Through the development of faster components, better use of caching technologies, and the really tough one - exploiting parallelism. Not that parallel technologies like multicore processors are hard to build...we already have them.  It's just that we're not that good yet at using them effectively.  And if we don't get better, users will abandon cloud-based services...in less than 3 seconds.

  Read the article

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• How to do call function after client finishes download from tornado web server?

  - by Shabbyrobe

  I would like to be able to run some cleanup functions if and only if the client successfully completes the download of a file I'm serving using Tornado. I installed the firefox throttle tool and had it slow the connection down to dialup speed and installed this handler to generate a bunch of rubbish random text: class CrapHandler(BaseHandler): def get(self, token): crap = ''.join(random.choice(string.ascii_uppercase + string.digits) for x in range(100000)) self.write(crap) print "done" I get the following output from tornado immediately after making the request: done I 100524 19:45:45 web:772] 200 GET /123 (192.168.45.108) 195.10ms The client then plods along downloading for about 20 seconds. I expected that it would print "done" after the client was done. Also, if I do the following I get pretty much the same result: class CrapHandler(BaseHandler): @tornado.web.asynchronous def get(self, token): crap = ''.join(random.choice(string.ascii_uppercase + string.digits) for x in range(100000)) self.write(crap) self.finish() print "done" Am I missing something fundamental here? Can tornado even support what I'm trying to do? If not, is there an alternative that does?

  Read the article

• Is there an application I can show a client the speed of their site via differring internet connecti

  - by Slimpickens

  I have a new client with an old website using massive amounts of tables and inline styles. Some page weigh over 3MB due to huge backgrounds and other large images. I suggested they at least compress the files to speed up the site but they're convinced it's fast. Since they have 13Mbit connection at the office everything seems fast. I'm looking for a tweak, program or web app capable of loading pages at varying speeds so they understand how it might load for slower DSL or (gasp) dialup users. Thanks for any help!

  Read the article

• How do I find the IP address of a GPRS modem?

  - by Hanno Fietz

  I want to pull data from a device that is accessed via a serial protocol and has a GPRS modem attached which should allow transparent access over an IP connection. It seems to me that this approach is upside down, because how should I know at which IP address the device currently is? Unfortunately, the device itself is rather dumb, so I can't make it send something to my server, which would reveal the current IP. For home routers on dialup lines, there's dynamic DNS services. Is there something equivalent in the mobile world? Each modem would, of course, have its phone number as a reliable address, but how does that help me? Practically all material on GPRS etc. that I can find online seems to be concerned with initiating the connection from the modem side, since that's what the system is designed for.

  Read the article

• Cisco ASA: Routing packets based on where the connections started from

  - by DrStalker

  We have a Cisco ASA 5505 (version 8.2(2)) with three interfaces: outside: IP address 11.11.11.11, this is the default route inside: IP address 10.1.1.1, this is the local subnet newlink: 22.22.22.22, this is a new internet connection. We need to move VPN users from the 11.11.11.11 address to the 22.22.22.22 address, and we're using SSH on the ASA as to test and sort out the routing. The problem we have is this: If we define a particular IP as being on a static route out the newlink interface then it can SSH to 22.22.22.22 fine. If we do not define a static route then the traffic hits the ASA, but the return traffic does not come back over newlink; presumably it gets sent over the outside interfcae as that is the default route. We can't define a static route for each remote endpoint because there are dialup VPN users, who obviously change IP a lot What we need to do is configure the ASA so if a connection comes in on the newlink interface then the outgoing packets for that go over the newlink interface, not the default route. With iptables this should be do-able by marking the connection and doing mark-routing, but what is the equivalent for a Cisco ASA?

  Read the article

• No LAN and SMB access, and Explorer not responsive, when using a second connection

  - by Lorenzo

  I apologize if this is a duplicate question, I know that there are several questions about multiple connection (LAN + LAN and LAN + dialup) but I haven't been able to find one that fits my scenario. I'm still using Windows XP on my corporate laptop, and I'm connected to the corporate LAN via Ethernet. The LAN NIC has a public IP address, although not accessible externally, obtained via the corporate DNS server. This connection is firewalled and requires a proxy to access Internet. To access Internet sites blocked by the corporate firewall, I use my smartphone via USB tethering. It is seen as a new LAN interface, and I get a private IP address (class 192.168..). There are two problems: The LAN is not accessible, as the default gateway goes to the tethering NIC. I'd like to solve this, but I can live with it. My PC becomes unresponsive if I use Windows Explorer to view local files, or even when I open the start menu. I guess that this is caused by attemps to connect to a mapped network drive. But I disabled the "Client for Microsoft Networks" in the tethering NIC. Why the system still hangs? Of course if I disable the Ethernet NIC, Explorer stops hanging. If you need further details, add a comment. Thanks!

  Read the article

• Ubuntu network card problem.

  - by Steve Greene

  Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

  Read the article

• error 734 the ppp link control protocal was terminated

  - by satheesh

  Hi, i want to connect my mobile internet to pc using bluetooth device. I installed blue soleil software in my pc. Steps: 1.I can able to pair my cellphone with pc bluetooth device. 2.I selected my device and select bluetooth dialup networking service. 3.It asks an alert "DUN connection with device?" in my mobile. 4.After Clicked "YES", connect bluetooth DUN connection window opens. 5.In that window there was a fields "User Name", "PassWord" which i leave empty and then in "Dial = 99**1#" and click Dial button. 6.After that it say "Registering your computer on the netwok.." and become fails. 7. The Error is as "error 734 the ppp link control protocal was terminated" The same procedure should be followed for Nokia 3110c it works fine.But in my samsung mobile c3053 it not connected also i am tryig with samsung corby pro BT3510 mobile . Is there any settings changes needed for samsung mobiles ? Can anyone help me ? Thanks in advance...........

  Read the article

• Retrieve values from multimdimensional array

  - by vincentlerry

  I have a great difficulty. I need to retrieve [title], [url] and [abstract] values ??from this multidimensional array. Also, I have to store those values in mysql database. thanks in advance!!! Array ( [bossresponse] = Array ( [responsecode] = 200 [limitedweb] = Array ( [start] = 0 [count] = 20 [totalresults] = 972000 [results] = Array ( [0] = Array ( [date] = [clickurl] = http://www.torchlake.com/ [url] = http://www.torchlake.com/ [dispurl] = www.torchlake.com [title] = Torch Lake, COLI Inc, Highspeed, Dial-up, Wireless ... [abstract] = Welcome to COLI Inc. Chain O' Lake Internet. Local Northern Michigan ISP, offering Dialup Internet access, Wireless access, Web design, and T1 services in Northern ... ) [1] = Array ( [date] = [clickurl] = http://en.wikipedia.org/wiki/Torch_Lake_(Antrim_County,_Michigan) [url] = http://en.wikipedia.org/wiki/Torch_Lake_(Antrim_County,_Michigan) [dispurl] = en.wikipedia.org/wiki/Torch_Lake_(Antrim_County,_Michigan) [title] = Torch Lake (Antrim County, Michigan) - Wikipedia, the free ... [abstract] = Torch Lake at 19 miles (31 km) long is Michigan's longest lake and at approximately 18,770 acres (76 km²) is Michigan's second largest lake. Within it are several ... ) this is the entire code that generates this array: require("OAuth.php"); $cc_key = ""; $cc_secret = ""; $url = "http://yboss.yahooapis.com/ysearch/limitedweb"; $args = array(); $args["q"] = "car"; $args["format"] = "json"; $args["count"] = 20; $consumer = new OAuthConsumer($cc_key, $cc_secret); $request = OAuthRequest::from_consumer_and_token($consumer, NULL,"GET", $url, $args); $request-sign_request(new OAuthSignatureMethod_HMAC_SHA1(), $consumer, NULL); $url = sprintf("%s?%s", $url, OAuthUtil::build_http_query($args)); $ch = curl_init(); $headers = array($request-to_header()); curl_setopt($ch, CURLOPT_HTTPHEADER, $headers); curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_RETURNTRANSFER, TRUE); $rsp = curl_exec($ch); $results = json_decode($rsp, true);

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• Pxe net install Centos with Static IP

  - by Stu2000

  I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

  Read the article

• Which network protocol to use for lightweight notification of remote apps?

  - by Chris Thornton

  I have this situation.... Client-initiated SOAP 1.1 communication between one server and let's say, tens of thousands of clients. Clients are external, coming in through our firewall, authenticated by certificate, https, etc.. They can be anywhere, and usually have their own firewalls, NAT routers, etc... They're truely external, not just remote corporate offices. They could be in a corporate/campus network, DSL/Cable, even Dialup. Client uses Delphi (2005 + SOAP fixes from 2007), and the server is C#, but from an architecture/design standpoint, that shouldn't matter. Currently, clients push new data to the server and pull new data from the server on 15-minute polling loop. The server currently does not push data - the client hits the "messagecount" method, to see if there is new data to pull. If 0, it sleeps for another 15 min and checks again. We're trying to get that down to 7 seconds. If this were an internal app, with one or just a few dozen clients, we'd write a cilent "listener" soap service, and would push data to it. But since they're external, sit behind their own firewalls, and sometimes private networks behind NAT routers, this is not practical. So we're left with polling on a much quicker loop. 10K clients, each checking their messagecount every 10 seconds, is going to be 1000/sec messages that will mostly just waste bandwidth, server, firewall, and authenticator resources. So I'm trying to design something better than what would amount to a self-inflicted DoS attack. I don't think it's practical to have the server send soap messages to the client (push) as this would require too much configuration at the client end. But I think there are alternatives that I don't know about. Such as: 1) Is there a way for the client to make a request for GetMessageCount() via Soap 1.1, and get the response, and then perhaps, "stay on the line" for perhaps 5-10 minutes to get additional responses in case new data arrives? i.e the server says "0", then a minute later in response to some SQL trigger (the server is C# on Sql Server, btw), knows that this client is still "on the line" and sends the updated message count of "5"? 2) Is there some other protocol that we could use to "ping" the client, using information gathered from their last GetMessageCount() request? 3) I don't even know. I guess I'm looking for some magic protocol where the client can send a GetMessageCount() request, which would include info for "oh by the way, in case the answer changes in the next hour, ping me at this address...". Also, I'm assuming that any of these "keep the line open" schemes would seriously impact the server sizing, as it would need to keep many thousands of connections open, simultaneously. That would likely impact the firewalls too, I think. Is there anything out there like that? Or am I pretty much stuck with polling? TIA, Chris

  Read the article

• Which network protocol to use for lightweight notification of remote apps (Delphi 2005)

  - by Chris Thornton

  I have this situation.... Client-initiated SOAP 1.1 communication between one server and let's say, tens of thousands of clients. Clients are external, coming in through our firewall, authenticated by certificate, https, etc.. They can be anywhere, and usually have their own firewalls, NAT routers, etc... They're truely external, not just remote corporate offices. They could be in a corporate/campus network, DSL/Cable, even Dialup. Currently, clients push new data to the server and pull new data from the server on 15-minute polling loop. The server currently does not push data - the client hits the "messagecount" method, to see if there is new data to pull. If 0, it sleeps for another 15 min and checks again. We're trying to get that down to 7 seconds. If this were an internal app, with one or just a few dozen clients, we'd write a cilent "listener" soap service, and would push data to it. But since they're external, sit behind their own firewalls, and sometimes private networks behind NAT routers, this is not practical. So we're left with polling on a much quicker loop. 10K clients, each checking their messagecount every 10 seconds, is going to be 1000/sec messages that will mostly just waste bandwidth, server, firewall, and authenticator resources. So I'm trying to design something better than what would amount to a self-inflicted DoS attack. I don't think it's practical to have the server send soap messages to the client (push) as this would require too much configuration at the client end. But I think there are alternatives that I don't know about. Such as: 1) Is there a way for the client to make a request for GetMessageCount() via Soap 1.1, and get the response, and then perhaps, "stay on the line" for perhaps 5-10 minutes to get additional responses in case new data arrives? i.e the server says "0", then a minute later in response to some SQL trigger (the server is C# on Sql Server, btw), knows that this client is still "on the line" and sends the updated message count of "5"? 2) Is there some other protocol that we could use to "ping" the client, using information gathered from their last GetMessageCount() request? 3) I don't even know. I guess I'm looking for some magic protocol where the client can send a GetMessageCount() request, which would include info for "oh by the way, in case the answer changes in the next hour, ping me at this address...". Also, I'm assuming that any of these "keep the line open" schemes would seriously impact the server sizing, as it would need to keep many thousands of connections open, simultaneously. That would likely impact the firewalls too, I think. Is there anything out there like that? Or am I pretty much stuck with polling? TIA, Chris

  Read the article

• Linux pptp client stops working after several hours

  - by Aron Rotteveel

  Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

  Read the article

< Previous Page | 1 2 3  | Next Page >