Search Results

Search found 209 results on 9 pages for 'gordon fontenot'.

Page 2/9 | < Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >

• Fetching Core Data for Tableview on iPhone - Tutorial leaves me with crashes when adding items to a

  - by Gordon Fontenot

  Been following the Core Data tutorial on Apple's developer site, and all is good until I have to add something to the fetched store. I am getting this error after a successful build and load when I try to add a new item to the list: Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid update: invalid number of rows in section 0. The number of rows contained in an existing section after the update (0) must be equal to the number of rows contained in that section before the update (0), plus or minus the number of rows inserted or deleted from that section (1 inserted, 0 deleted). Due to the fact that the fetch goes through fine, and that if I replace the fetching with eventList = [[NSMutableArray alloc] init] it works as expected (without persistance, of course), I am led to believe that the problem comes from not creating the Mutable Array correctly. Here's the problematic part of the code: NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Event" inManagedObjectContext:managedObjectContext]; [request setEntity:entity]; NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"creationDate" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptors release]; [sortDescriptor release]; NSError *error; NSMutableArray *mutableFetchResults = [[managedObjectContext executeFetchRequest:request error:&error] mutableCopy]; if (mutableFetchResults = nil) { //Handle the error } [self setEventList:mutableFetchResults]; [mutableFetchResults release]; [request release]; I have tried switching the NSArrays in the second chunk out with NSMutableArrays, but I still get the same error. For reference, the section of code that is throwing the error when I try adding an entry is here: [eventList insertObject:event atIndex:0]; NSIndexPath *indexPath = [NSIndexPath indexPathForRow:0 inSection:0]; [self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; [self.tableView scrollToRowAtIndexPath:[NSIndexPath indexPathForRow:0 inSection:0] atScrollPosition:UITableViewScrollPositionTop animated:YES]; it errors out at the insertRowsAtIndexPaths call. Thanks in advance for any help

  Read the article

• Is there a way to pass a regex capture to a block in Ruby?

  - by Gordon Fontenot

  I have a hash with a regex for the key and a block for the value. Something like the following: { 'test (.+?)' => { puts $1 } } Not exactly like that, obviously, since the block is being stored as a Proc, but that's the idea. I then have a regex match later on that looks a lot like this hash.each do |pattern, action| if /#{pattern}/i.match(string) action.call end end The idea was to store the block away in the hash to make it a bit easier for me to expand upon in the future, but now the regex capture doesn't get passed to the block. Is there a way to do this cleanly that would support any number of captures I put in the regex (as in, some regex patterns may have 1 capture, others may have 3)?

  Read the article

• Any way to assign terminal output to variable with python?

  - by Gordon Fontenot

  I need to grab the duration of a video file via python as part of a larger script. I know I can use ffmpeg to grab the duration, but I need to be able to save that output as a variable back in python. I thought this would work, but it's giving me a value of 0: cmd = 'ffmpeg -i %s 2>&1 | grep "Duration" | cut -d \' \' -f 4 | sed s/,//' % ("Video.mov") duration = os.system(cmd) print duration Am I doing the output redirect wrong? Or is there simply no way to pipe the terminal output back into python?

  Read the article

• Nagios orphaned services warnings

  - by Gordon

  We have had Nagios running on one of our servers with out any problems for a while but lately certain old service warning have been reappearing and then disappearing on the service detail page. From looking at the logs I found warning like the following. Warning: The check of service 'Tomcat' on host 'virtual1' looks like it was orphaned (results never came back). I'm scheduling an immediate check of the service... Has anyone ever came across this before or at least know a way to delete the old Orphaned Warnings. The Nagios Version we are running is Version 3.0b7 so an update might be in order. Thanks.

  Read the article

• MySQL Federated Tables Escaped Table Names

  - by Gordon

  I am trying to use MySQL federated tables. The problem is that the documentation specified at http://dev.mysql.com/doc/refman/5.0/en/federated-use.html says that a federated table should be created using the following format for the CONNECTION parameter: scheme://user_name[:password]@host_name[:port_num]/db_name/tbl_name E.G. CONNECTION='mysql://username:password@hostname:port/database/tablename' CONNECTION='mysql://username@hostname/database/tablename' CONNECTION='mysql://username:password@hostname/database/tablename' The problem is that the table I am trying to connect to has non-standard characters in it and I cannot find the proper way to scape them in the connections tring. For example, a table named `Table (one)` . Which has the space and the parenthesis, requiring backticks surrounding it inside any SQL code. Anyone know the proper way to do this?

  Read the article

• Debian apt dependency mismatch (libc6)

  - by Sean Gordon

  Earlier, I tried to install package via apt-get (cython), but it failed with the Errors were encountered while processing: message, and since then, apt is refusing to install anything. apt-get check output below: root@dix:~# apt-get check Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libc6 : Depends: libc-bin (= 2.11.3-2) but 2.11.3-4 is installed libc6-dev : Depends: libc6 (= 2.11.3-4) but 2.11.3-2 is installed libc6-i386 : Depends: libc6 (= 2.11.3-4) but 2.11.3-2 is installed E: Unmet dependencies. Try using -f. Apt/aptitude don't seem to be able to fix this dependency issue, and I don't know what to do. Edit: Running apt-get -f install results in no change, and my sources are all squeeze. Running apt-get update then apt-get dist-upgrade show no change either. Edit 2: I went back to try this again in a new terminal and apt-get -f install gives this error: dpkg: error processing /var/cache/apt/archives/libc6_2.11.3-4_amd64.deb (--unpack): subprocess new pre-installation script killed by signal (Aborted) configured to not write apport reports Errors were encountered while processing: /var/cache/apt/archives/libc6_2.11.3-4_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Edit 3: Using apt-get clean first, then the previous commands, results in the first error again. Using apt-get -f dist-upgrade gives the below. Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following packages will be upgraded: apache2 apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common at automake base-files bind9 bind9-doc bind9-host bind9utils debian-archive-keyring dnsutils dpkg-dev file host initscripts isc-dhcp-client isc-dhcp-common krb5-multidev libapr1 libbind9-60 libc6 libdns69 libdpkg-perl libexpat1 libexpat1-dev libgc1c2 libgssapi-krb5-2 libgssrpc4 libisc62 libisccc60 libisccfg62 libk5crypto3 libkadm5clnt-mit7 libkadm5srv-mit7 libkdb5-4 libkrb5-3 libkrb5-dev libkrb5support0 liblwres60 libmagic1 libmysqlclient16 libnss3-1d libssl-dev libssl0.9.8 libtiff4 libtiff4-dev libtiffxx0c2 libxi6 libxml2 linux-libc-dev lwresd mysql-client-5.1 mysql-common mysql-server mysql-server-5.1 mysql-server-core-5.1 openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssh-client openssh-server openssl procps python python-crypto python-minimal sudo sysv-rc sysvinit sysvinit-utils tzdata tzdata-java 75 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 5 not fully installed or removed. Need to get 0 B/79.9 MB of archives. After this operation, 1,411 kB of additional disk space will be used. (Reading database ... 52241 files and directories currently installed.) Preparing to replace libc6 2.11.3-2 (using .../libc6_2.11.3-4_amd64.deb) ... *** stack smashing detected ***: /usr/bin/perl terminated ======= Backtrace: ========= /lib/libc.so.6(__fortify_fail+0x37)[0x7fdaad9b9f87] /lib/libc.so.6(__fortify_fail+0x0)[0x7fdaad9b9f50] /usr/lib/libperl.so.5.10(Perl_yylex+0x5896)[0x7fdaae343346] [0x8e83a0] ======= Memory map: ======== 00400000-00402000 r-xp 00000000 08:01 525338 /usr/bin/perl 00601000-00602000 rw-p 00001000 08:01 525338 /usr/bin/perl 00602000-0091f000 rw-p 00000000 00:00 0 [heap] 7fdaaca54000-7fdaaca6a000 r-xp 00000000 08:01 393818 /lib/libgcc_s.so.1 7fdaaca6a000-7fdaacc69000 ---p 00016000 08:01 393818 /lib/libgcc_s.so.1 7fdaacc69000-7fdaacc6a000 rw-p 00015000 08:01 393818 /lib/libgcc_s.so.1 7fdaacc6a000-7fdaacc6f000 r-xp 00000000 08:01 524949 /usr/lib/perl5/auto/Locale/gettext/gettext.so 7fdaacc6f000-7fdaace6e000 ---p 00005000 08:01 524949 /usr/lib/perl5/auto/Locale/gettext/gettext.so 7fdaace6e000-7fdaace6f000 rw-p 00004000 08:01 524949 /usr/lib/perl5/auto/Locale/gettext/gettext.so 7fdaace6f000-7fdaace79000 r-xp 00000000 08:01 532753 /usr/lib/perl/5.10.1/auto/Encode/Encode.so 7fdaace79000-7fdaad078000 ---p 0000a000 08:01 532753 /usr/lib/perl/5.10.1/auto/Encode/Encode.so 7fdaad078000-7fdaad079000 rw-p 00009000 08:01 532753 /usr/lib/perl/5.10.1/auto/Encode/Encode.so 7fdaad079000-7fdaad07e000 r-xp 00000000 08:01 525444 /usr/lib/perl/5.10.1/auto/IO/IO.so 7fdaad07e000-7fdaad27d000 ---p 00005000 08:01 525444 /usr/lib/perl/5.10.1/auto/IO/IO.so 7fdaad27d000-7fdaad27e000 rw-p 00004000 08:01 525444 /usr/lib/perl/5.10.1/auto/IO/IO.so 7fdaad27e000-7fdaad299000 r-xp 00000000 08:01 525450 /usr/lib/perl/5.10.1/auto/POSIX/POSIX.so 7fdaad299000-7fdaad498000 ---p 0001b000 08:01 525450 /usr/lib/perl/5.10.1/auto/POSIX/POSIX.so 7fdaad498000-7fdaad49b000 rw-p 0001a000 08:01 525450 /usr/lib/perl/5.10.1/auto/POSIX/POSIX.so 7fdaad49b000-7fdaad49e000 r-xp 00000000 08:01 525436 /usr/lib/perl/5.10.1/auto/Fcntl/Fcntl.so 7fdaad49e000-7fdaad69e000 ---p 00003000 08:01 525436 /usr/lib/perl/5.10.1/auto/Fcntl/Fcntl.so 7fdaad69e000-7fdaad69f000 rw-p 00003000 08:01 525436 /usr/lib/perl/5.10.1/auto/Fcntl/Fcntl.so 7fdaad69f000-7fdaad6a7000 r-xp 00000000 08:01 393824 /lib/libcrypt-2.11.3.so 7fdaad6a7000-7fdaad8a6000 ---p 00008000 08:01 393824 /lib/libcrypt-2.11.3.so 7fdaad8a6000-7fdaad8a7000 r--p 00007000 08:01 393824 /lib/libcrypt-2.11.3.so 7fdaad8a7000-7fdaad8a8000 rw-p 00008000 08:01 393824 /lib/libcrypt-2.11.3.so 7fdaad8a8000-7fdaad8d6000 rw-p 00000000 00:00 0 7fdaad8d6000-7fdaada2f000 r-xp 00000000 08:01 393822 /lib/libc-2.11.3.so 7fdaada2f000-7fdaadc2e000 ---p 00159000 08:01 393822 /lib/libc-2.11.3.so 7fdaadc2e000-7fdaadc32000 r--p 00158000 08:01 393822 /lib/libc-2.11.3.so 7fdaadc32000-7fdaadc33000 rw-p 0015c000 08:01 393822 /lib/libc-2.11.3.so 7fdaadc33000-7fdaadc38000 rw-p 00000000 00:00 0 7fdaadc38000-7fdaadc4f000 r-xp 00000000 08:01 393248 /lib/libpthread-2.11.3.so 7fdaadc4f000-7fdaade4e000 ---p 00017000 08:01 393248 /lib/libpthread-2.11.3.so 7fdaade4e000-7fdaade4f000 r--p 00016000 08:01 393248 /lib/libpthread-2.11.3.so 7fdaade4f000-7fdaade50000 rw-p 00017000 08:01 393248 /lib/libpthread-2.11.3.so 7fdaade50000-7fdaade54000 rw-p 00000000 00:00 0 7fdaade54000-7fdaaded4000 r-xp 00000000 08:01 393826 /lib/libm-2.11.3.so 7fdaaded4000-7fdaae0d4000 ---p 00080000 08:01 393826 /lib/libm-2.11.3.so 7fdaae0d4000-7fdaae0d5000 r--p 00080000 08:01 393826 /lib/libm-2.11.3.so 7fdaae0d5000-7fdaae0d6000 rw-p 00081000 08:01 393826 /lib/libm-2.11.3.so 7fdaae0d6000-7fdaae0d8000 r-xp 00000000 08:01 393825 /lib/libdl-2.11.3.so 7fdaae0d8000-7fdaae2d8000 ---p 00002000 08:01 393825 /lib/libdl-2.11.3.so 7fdaae2d8000-7fdaae2d9000 r--p 00002000 08:01 393825 /lib/libdl-2.11.3.so 7fdaae2d9000-7fdaae2da000 rw-p 00003000 08:01 393825 /lib/libdl-2.11.3.so 7fdaae2da000-7fdaae43f000 r-xp 00000000 08:01 525387 /usr/lib/libperl.so.5.10.1 7fdaae43f000-7fdaae63e000 ---p 00165000 08:01 525387 /usr/lib/libperl.so.5.10.1 7fdaae63e000-7fdaae647000 rw-p 00164000 08:01 525387 /usr/lib/libperl.so.5.10.1 7fdaae647000-7fdaae665000 r-xp 00000000 08:01 393819 /lib/ld-2.11.3.so 7fdaae854000-7fdaae859000 rw-p 00000000 00:00 0 7fdaae862000-7fdaae864000 rw-p 00000000 00:00 0 7fdaae864000-7fdaae865000 r--p 0001d000 08:01 393819 /lib/ld-2.11.3.so 7fdaae865000-7fdaae866000 rw-p 0001e000 08:01 393819 /lib/ld-2.11.3.so 7fdaae866000-7fdaae867000 rw-p 00000000 00:00 0 7fff9616d000-7fff9618e000 rw-p 00000000 00:00 0 [stack] 7fff961ff000-7fff96200000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r--p 00000000 00:00 0 [vsyscall] dpkg: error processing /var/cache/apt/archives/libc6_2.11.3-4_amd64.deb (--unpack): subprocess new pre-installation script killed by signal (Aborted) Errors were encountered while processing: /var/cache/apt/archives/libc6_2.11.3-4_amd64.deb

  Read the article

• WSS 3.0 Wiki export

  - by Gordon Carpenter-Thompson

  We have a WSS 3.0 server with a lot of wiki pages created which need to be moved over to MediaWiki. Are there any tools that can be used to automate this process? Thanks

  Read the article

• fail2ban log parsing too slow on Raspberry Pi - options? [migrated]

  - by Gordon Morehouse

  I'm running fail2ban on a Raspberry Pi at 950MHz which I cannot overclock further. The Pi is occasionally subject to SYN floods on particular ports. I've set up iptables to throttle the rate of SYNs on the port of interest; when the throttle limits are exceeded, hosts which send SYNs are dropped into the REJECT chain and the particular SYN packet which exceeded the limit is logged. fail2ban then watches for these logged SYNs and, after seeing a few, temporarily bans the host for a short time (this is a transient issue in the app I'm working with). The problem is that the SYN floods can occasionally reach rates which are too fast for fail2ban to keep up with; I'll see 20-40 log messages per second, and eventually fail2ban falls behind and becomes ineffective. To add insult to injury, it continues consuming a LOT of CPU as it tries to catch up. I have verified that DROP chained packets from hosts already banned by fail2ban are not logged, and thus do not add to its load. What are my options here? I have a few ideas, but no clear path forward. Could I make the log-parse regex "easier" so it takes fewer cycles? Would using iptables --log-prefix to put a token near the start of the log message, and/or otherwise simplifying/altering the fail2ban regex help? Here is the current fail2ban config line containing a regex: failregex = kernel:.*?SRC=(?:::f{4,6}:)?(?P<host>[\w\-.^_]+) DST.*?SYN Is there a faster way for fail2ban to watch for the packets exceeding the limits than parsing kern.log? Could fail2ban be run under PyPy instead of CPython with minimal nonstandard wizardry (the OS is Raspbian 7, so, mostly Debian 7)? Is there something better than fail2ban that I could use to watch for the packets which exceed the SYN limits, and after N exceeds in X seconds, temporarily put the offending IP into the iptables DROP bucket, and take it out when the ban timer expires? Again, I'd vastly prefer a solution that uses as much software available in Debian as possible, though I can build Debian packages in a pinch.

  Read the article

• Windows 7 Unidentified Network problem. Cannot connect to the internet.

  - by Gordon

  This is my first time on this website, but I was told this was a good place to ask this. I basically have a problem with Windows 7 connecting to my home network. It keeps identifying my home network as unidentified, and it continually does "identifying" until it simply say cannot connect to the Internet. I don't know how this problem occurred. It simply happened one morning. I am running Windows 7 Ultimate. I have a Realtek Network adapter. I don't think its the drivers. I have already tried system restore to a date when my computer was working fine but it still didn't fix the problem. From what Ive read online there was this bug in the services.msc area, something to do with Bonjour service. I cannot find either so I do not think that was the problem. I'll be online for a while, so I can provide any additional details if needed. I don't really know how to explain it because its so fudging complicated. I really appreciate clear and open steps to solving this. I have tried some things like system restore and rolling back drivers, doesn't seem to help.

  Read the article

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• Clearing Cache in Mail on Snow Leopard

  - by Gordon

  Can anyone tell me how to clear the cache in the Mail application on Snow Leopard? I noticed that it was automatically backing up my gmail messages so it ended up caching 11GB of emails even though that's more than my account. The only solution I seem to be able to find is to delete the files in /Users/me/Library/Mail/MyGmailAccount Is this the best solution or is there a better way?

  Read the article

• IIS6 Permissions

  - by Gordon Carpenter-Thompson

  We have a set of IIS6 Jakarta/ASP.NET applications (implemented as virtual directories) on a machine without a domain. The directories all exist under the default website. We need to setup the permissions so that certain users can access only specific applications yet others users can access several of the applications. The way it's been setup previously has been to explicitly deny access to the users for every application except the ones that they are allowed to see. The problem is that the list of applications changes fairly often (for demos etc) and it's been known for the developers to forget to deny the old users access to the new applications which leads to security problems. This is all quite unmaintainable. Does anybody have any advice on this? Surely I can't be the only person to find this all a bit of a mess? Thanks

  Read the article

• Determining Age of Windows Computer

  - by Gordon

  What is the most accurate way to determine the age of a Windows Computer?

  Read the article

• NFS I/O monitoring

  - by Gordon

  I have a NFS mounted directory, and I'd like to monitor the I/O usage on it (MB/s reads and writes). What's the recommended way to do that ? This is the NFS client, I don't have access to the NFS server. I'm not interested in general I/O usage (otherwise I would use vmstat/iostat). It also has multiple NFS mounts, I'm interested in monitoring just one specific mount (or I might have used ethereal). Thanks!

  Read the article

• Accidental Extract Location - How to Clean Up?

  - by Gordon

  Sometimes I will do a command such as unzip tons_of_files.zip And I will forget to put a -d to point to a subdirectory. This causes the current folder to get filled with tons of files that are intermixed with the existing files. What is the best way to remove all these new files and/or move them to a new directory? I want to avoid having to manually examine the directory and determine if the file was part of the archive or was already present.

  Read the article

• Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. From their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• Upgrade OpenSSL 0.9.8k to OpenSSL 1.0.1c on Ubuntu 10.04

  - by Nina

  We're currently using Ubuntu 10.04 and based on the PCI Compliance results, we're told to upgrade our OpenSSL. I attempted to do this using this reference: http://sandilands.info/sgordon/upgrade-latest-version-openssl-on-ubuntu and http://www.lunarforums.com/dedicated_web_hosting_at_lunarpages/upgrading_openssl-t35015.0.html Unfortunately, they didn't work for me. And when I attempted to remove the old version prior to installation, it looks like it broke a few thins in the system. The article from Steve Gordon seemed like it would work for me, but when I ran the openssl version command, it still read that it was the old version. I was wondering if anyone has any suggestions on what I should do. Fix: After following the steps from Steven Gordon, make sure you restart apache and / or restart your computer (I did both, but I'm sure a simple restart will fix it right up).

  Read the article

• Core Data: Keypath "objectID" not found in entity

  - by Martin Gordon

  I'm using NSFetchedResultsController with a predicate to load a list of Documents in my application. I want to load all the Documents except the currently active one. I am using Rentzsch's MOGenerator to create a _Document class and then I put all my custom code in the Document subclass. _Document generates an objectID property with type DocumentID. In the class that creates the controller, I set the controller's currentDocID property: controller.currentDocID = self.document.objectID; In the controller itself, I lazy load the fetchedResultsController like this: - (NSFetchedResultsController *)fetchedResultsController { if (fetchedResultsController != nil) { return fetchedResultsController; } NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Document" inManagedObjectContext:managedObjectContext]; [fetchRequest setEntity:entity]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"(objectID != %@)", self.currentDocID]; [fetchRequest setPredicate:predicate]; NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"dateModified" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [fetchRequest setSortDescriptors:sortDescriptors]; NSFetchedResultsController *aFetchedResultsController = [[NSFetchedResultsController alloc] initWithFetchRequest:fetchRequest managedObjectContext:managedObjectContext sectionNameKeyPath:nil cacheName:@"Root"]; aFetchedResultsController.delegate = self; self.fetchedResultsController = aFetchedResultsController; [aFetchedResultsController release]; [sortDescriptor release]; [sortDescriptors release]; return fetchedResultsController; } When the fetchedResultsController loads, my app crashes with an unhandled exception: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'keypath objectID not found in entity <NSSQLEntity Document id=1>' It's my understanding that all NSManagedObjects have an objectID, whether temporary or permanent. Is this not the case? Any thoughts?

  Read the article

• Logging Application Block

  - by Gordon Carpenter-Thompson

  I'm using the Logging Application Block in my ASP.NET application and want to convert the application to a Sharepoint WebPart. It all works fine as long as I change: <trust level="WSS_Minimal" originUrl="" /> to <trust level="Full" originUrl="" /> If not I get an exception in the logs: Failed to add webpart *************255Fcatalogs%252Fwp%252FSearchWebPart%252Ewebpart;SearchWebPart. Exception Microsoft.SharePoint.WebPartPages.WebPartPageUserException: The type initializer for 'Microsoft.Practices.EnterpriseLibrary.Logging.Logger' threw an exception. ---> System.TypeInitializationException: The type initializer for 'Microsoft.Practices.EnterpriseLibrary.Logging.Logger' threw an exception. ---> System.TypeInitializationException: The type initializer for 'Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource' threw an exception. ---> System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neut... ...ral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.CodeAccessPermission.Demand() at System.AppDomainSetup.VerifyDir(String dir, Boolean normalize) at System.AppDomainSetup.get_ConfigurationFile() at Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSourceImplementation..ctor(Boolean refresh) at Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource..cctor() The action that failed was: Demand The type of the first permission that failed was: System.Security.Permissions.FileIOPermission The first permission that failed was: <IPermission class="System.Security.Permissions.FileIOPermi... ...ssion, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" PathDiscovery="D:\Inetpub\wwwroot\wss\VirtualDirectories\8686\web.config"/> The demand was for: <IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" PathDiscovery="D:\Inetpub\wwwroot\wss\VirtualDirectories\8686\web.config"/> The granted set of the failing assembly was: <PermissionSet class="System.Security.PermissionSet" version="1"> <IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Flags="Execution"/> <IPermission class="System.Security.Permissions.StrongNameIdentityPermis... ...sion, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" PublicKeyBlob="0024000004800000940000000602000000240000525341310004000001000100257FAE170ABB2AB4A8EF914DFEA757F7DB8C221F01850FC8753A4C6585C0B07749DA33DF4D64A721A070E7CDCDEFC8C786E3626418389BCF461E4300E6F4C477BE5CE64AD12C29D517208D6BA627D9F73A9066B7638BE1FEE3EABE6C3E537B546CB3B5DE5E436F95278BB1E9DBDE85C2A6B624010A8073841D467CC7A0A0C6C8" Name="Microsoft.Practices.EnterpriseLibrary.Common" AssemblyVersion="3.1.0.0"/> <IPermission class="System.Security.Permissions.UrlIdentityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Url="file:///D:/Inetpub/wwwroot/wss/VirtualDirectories/8686/bin/Microsoft.Practices.EnterpriseLibrary.Common.DLL"/> <IPe... ...rmission class="System.Security.Permissions.ZoneIdentityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Zone="MyComputer"/> <IPermission class="System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Level="Minimal"/> <IPermission class="Microsoft.SharePoint.Security.WebPartPermission, Microsoft.SharePoint.Security, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1" Connections="True"/> </PermissionSet> The assembly or AppDomain that failed was: Microsoft.Practices.EnterpriseLibrary.Common, Version=3.1.0.0, Culture=neutral, PublicKeyToken=a646907c4a695009 The Zone of the assembly that failed was: MyComputer The Url of the assem... ...bly that failed was: file:///D:/Inetpub/wwwroot/wss/VirtualDirectories/8686/bin/Microsoft.Practices.EnterpriseLibrary.Common.DLL --- End of inner exception stack trace --- at Microsoft.Practices.EnterpriseLibrary.Common.Configuration.SystemConfigurationSource..ctor() at Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceFactory.Create() at Microsoft.Practices.EnterpriseLibrary.Logging.Logger..cctor() --- End of inner exception stack trace --- at Microsoft.Practices.EnterpriseLibrary.Logging.Logger.Write(LogEntry log) at com.okana.sharepoint.SearchWebPart.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.AddedControl(Control control, Int32 index) at System.Web.UI.ControlCollection.Add(Con... ...trol child) at System.Web.UI.WebControls.WebParts.WebPartManager.WebPartManagerControlCollection.AddWebPartHelper(WebPart webPart) at System.Web.UI.WebControls.WebParts.WebPartManager.WebPartManagerControlCollection.AddWebPart(WebPart webPart) at System.Web.UI.WebControls.WebParts.WebPartManager.AddWebPart(WebPart webPart) at System.Web.UI.WebControls.WebParts.WebPartManagerInternals.AddWebPart(WebPart webPart) at Microsoft.SharePoint.WebPartPages.SPWebPartManager.AddWebPartWithRetry(WebPart webPart) at Microsoft.SharePoint.WebPartPages.SPWebPartManager.AddDynamicWebPart(WebPart webPart) at Microsoft.SharePoint.WebPartPages.SPWebPartManager.LoadWebPart(WebPart aspWebPart, String zoneId, Int32 zoneIndex, Boolean isClosed) at Microsoft.SharePoint.WebPartPages.... ...SPWebPartManager.AddWebPartInternalShared(WebPart webPart) at Microsoft.SharePoint.WebPartPages.SPWebPartManager.AddWebPartInternal(SPSupersetWebPart superset, Boolean throwIfLocked) --- End of inner exception stack trace --- at Microsoft.SharePoint.WebPartPages.SPWebPartManager.AddWebPartInternal(SPSupersetWebPart superset, Boolean throwIfLocked) at Microsoft.SharePoint.WebPartPages.SPWebPartManager.AddWebPartInternal(SPSupersetWebPart superset) at Microsoft.SharePoint.WebPartPages.WebPartQuickAdd.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) My log configuration is this: <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="General" logWarningsWhenNoCategoriesMatch="true"> <listeners> <add fileName="XAE.log" rollSizeKB="0" timeStampPattern="yyyy-MM-dd" rollFileExistsBehavior="Overwrite" rollInterval="Day" formatter="Text Formatter" header="" footer="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.RollingFlatFileTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=3.1.0.0, Culture=neutral" traceOutputOptions="None" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.RollingFlatFileTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=3.1.0.0, Culture=neutral" name="Rolling Flat File Trace Listener" /> <add fileName="IDOL.log" rollSizeKB="0" timeStampPattern="yyyy-MM-dd" rollFileExistsBehavior="Overwrite" rollInterval="Day" formatter="Text Formatter" header="" footer="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.RollingFlatFileTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=3.1.0.0, Culture=neutral" traceOutputOptions="None" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.RollingFlatFileTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=3.1.0.0, Culture=neutral" name="IDOL Rolling Flat File Trace Listener" /> </listeners> <formatters> <add template="{timestamp(local)} : {category} : {message}" type="Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.TextFormatter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=3.1.0.0, Culture=neutral" name="Text Formatter" /> </formatters> <categorySources> <!-- For any log entries that you wish to suppress set "All" to "Off" --> <add switchValue="All" name="Communication"> <listeners> <add name="Rolling Flat File Trace Listener" /> </listeners> </add> <add switchValue="All" name="Debug"> <listeners> <add name="Rolling Flat File Trace Listener" /> </listeners> </add> <add switchValue="All" name="Exception"> <listeners> <add name="Rolling Flat File Trace Listener" /> </listeners> </add> <add switchValue="All" name="General"> <listeners> <add name="Rolling Flat File Trace Listener" /> </listeners> </add> <add switchValue="All" name="Warning"> <listeners> <add name="Rolling Flat File Trace Listener" /> </listeners> </add> <add switchValue="All" name="IDOL"> <listeners> <add name="IDOL Rolling Flat File Trace Listener" /> </listeners> </add> </categorySources> <specialSources> <allEvents switchValue="All" name="All Events" /> <notProcessed switchValue="All" name="Unprocessed Category" /> <errors switchValue="All" name="Logging Errors &amp; Warnings"> <listeners> <add name="Rolling Flat File Trace Listener" /> </listeners> </errors> </specialSources> </loggingConfiguration> Clearly this is because it's trying to create the log files and WSS_Minimal doesn't allow this. Is there a simple way to disable all logging for now? Removing the logging is problematic as it's used in the underlying libraries. I have tried setting all switchValue="All" to "Off" but it still throws the exception even though nothing should be logged

  Read the article

• Customizing toolbar items in VS2010

  - by Gordon Mackie JoanMiro

  Has the menu & toolbar customization functionality in VS2010 been reduced? I can't seem to be able to select an icon for an added command, nor set it to be icon-only. Previous versions of Visual Studio supported this functionality and even allowed the creation/editing of custom icons. Is this something that has suffered as a result of the move to the WPF-authored UI or am I missing something?

  Read the article

• Using Phing's dbdeploy task with transactions

  - by Gordon

  I am using Phing's dbdeploy task to manage my database schema. This is working fine, as long as there is no errors in my delta file. However, if there is an error, dbdeploy will just run the delta files up to the query with the error and then abort. This causes me some frustration, because I have to manually rollback the entry in the changelog table then. If I don't, dbdeploy will assume the migration was successful on a subsequent try. So the question is, there any way to get dbdeploy use transactions?

  Read the article

• UpdatePanel, Repeater, DataBinding Problem

  - by Gordon Carpenter-Thompson

  In a user control, I've got a Repeater inside of an UpdatePanel (which id displayed inside of a ModalPopupExtender. The Repeater is databound using an array list of MyDTO objects. There are two buttons for each Item in the list. Upon binding the ImageURL and CommandArgument are set. This code works fine the first time around but the CommandArgument is wrong thereafter. It seems like the display is updated correctly but the DTO isn't and the CommandArgument sent is the one that has just been removed. Can anybody spot any problems with the code? ASCX <asp:UpdatePanel ID="ViewDataDetail" runat="server" ChildrenAsTriggers="true"> <Triggers> <asp:PostBackTrigger ControlID="ViewDataCloseButton" /> <asp:AsyncPostBackTrigger ControlID="DataRepeater" /> </Triggers> <ContentTemplate> <table width="100%" id="DataResults"> <asp:Repeater ID="DataRepeater" runat="server" OnItemCommand="DataRepeater_ItemCommand" OnItemDataBound="DataRepeater_ItemDataBound"> <HeaderTemplate> <tr> <th><b>Name</b></th> <th><b>&nbsp;</b></th> </tr> </HeaderTemplate> <ItemTemplate> <tr> <td> <b><%#((MyDTO)Container.DataItem).Name%></b> </td> <td> <asp:ImageButton CausesValidation="false" ID="DeleteData" CommandName="Delete" runat="server" /> <asp:ImageButton CausesValidation="false" ID="RunData" CommandName="Run" runat="server" /> </td> </tr> <tr> <td colspan="2"> <table> <tr> <td>Description : </td> <td><%#((MyDTO)Container.DataItem).Description%></td> </tr> <tr> <td>Search Text : </td> <td><%#((MyDTO)Container.DataItem).Text%></td> </tr> </table> </td> </tr> </ItemTemplate> </asp:Repeater> </table> </ContentTemplate> </asp:UpdatePanel> Code-Behind public DeleteData DeleteDataDelegate; public RetrieveData PopulateDataDelegate; public delegate ArrayList RetrieveData(); public delegate void DeleteData(String sData); protected void Page_Load(object sender, EventArgs e) { //load the initial data.. if (!Page.IsPostBack) { if (PopulateDataDelegate != null) { this.DataRepeater.DataSource = this.PopulateDataDelegate(); this.DataRepeater.DataBind(); } } } protected void DataRepeater_ItemCommand(object source, RepeaterCommandEventArgs e) { if (e.CommandName == "Delete") { if (DeleteDataDelegate != null) { DeleteDataDelegate((String)e.CommandArgument); BindDataToRepeater(); } } else if (e.CommandName == "Run") { String sRunning = (String)e.CommandArgument; this.ViewDataModalPopupExtender.Hide(); } } protected void DataRepeater_ItemDataBound(object source, RepeaterItemEventArgs e) { RepeaterItem item = e.Item; if (item != null && item.DataItem != null) { MyDTO oQuery = (MyDTO)item.DataItem; ImageButton oDeleteControl = (ImageButton) item.FindControl("DeleteData"); ImageButton oRunControl = (ImageButton)item.FindControl("RunData"); if (oDeleteControl != null && oRunControl !=null) { oRunControl.ImageUrl = "button_expand.gif"; oRunControl.CommandArgument = "MyID"; oDeleteControl.ImageUrl = "btn_remove.gif"; oDeleteControl.CommandArgument = "MyID"; } } } public void BindDataToRepeater() { this.DataRepeater.DataSource = this.PopulateDataDelegate(); this.DataRepeater.DataBind(); } public void ShowModal(object sender, EventArgs e) { BindDataToRepeater(); this.ViewDataModalPopupExtender.Show(); }

  Read the article

• how to display image in repeater after AJAX AsyncFileUpload ?

  - by Gordon Shamway

  Hello i am using the AsyncFileUpload from the ajaxtoolkit, upter the upload is complete , i want to display all the images that were uploaded (and their URL is inserted into the DB) with my repeater and binding method. but its not working! the images are uploaded, the DB insert works file, but i cant see the images after the repeater is dinded. (i have to mention that if i go step by step, i do see that the ITEMBOUND is being binded and executed) <ajax:TabContainer runat="server" ID="testTab"> <ajax:TabPanel runat="server" ID="testTabContainer"> <ContentTemplate> <ajax:AsyncFileUpload ID="uploadAsyncImage" runat="server" OnUploadedComplete="InsertToTemp" ThrobberID="Throbber"/> <asp:Label ID="Throbber" runat="server" Style="display: none"> <img src="Images/indicator.gif" align="absmiddle" alt="loading" /> </asp:Label> <br /> <asp:UpdatePanel runat="server" ID="pnlImages" UpdateMode="Conditional" ChildrenAsTriggers="true"> <ContentTemplate> <asp:Repeater runat="server" ID="rptImages" > <ItemTemplate> <a href="<%# DataBinder.Eval(Container.DataItem, "PicURL")%>" rel="lightbox"> <asp:Image ImageUrl='<%# DataBinder.Eval(Container.DataItem, "PicURL")%>' Width="50" Height="50" runat="server" ID="testPic" /> </a> </ItemTemplate> </asp:Repeater> </ContentTemplate> </asp:UpdatePanel> </ContentTemplate> </ajax:TabPanel> </ajax:TabContainer> </form> also adding my Code Behind, since it might be important or will help you get an idea of what i am trying to do.private void BindRepater() { ProjDataContext db = DbContext.DbContextProvider(); var pic = from p in db.TempProdCats where p.SessionID == Session.SessionID.ToString() select new { PicURL = p.PicURL }; rptImages.DataSource = pic; rptImages.DataBind(); pnlImages.Update(); } protected void rptImages_ItemDataBound(object sender, RepeaterItemEventArgs e) { if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem) { Image lblCat = (Image)e.Item.FindControl("testPic"); lblCat.ImageUrl = (string)DataBinder.Eval(e.Item.DataItem, "PicURL"); pnlImages.Update(); } } your help will be highly appreciated , if any of you got any idea how to make it work...

  Read the article

• Getting Phing's dbdeploy task to automatically rollback on delta error

  - by Gordon

  I am using Phing's dbdeploy task to manage my database schema. This is working fine, as long as there is no errors in the queries of my delta files. However, if there is an error, dbdeploy will just run the delta files up to the query with the error and then abort. This causes me some frustration, because I have to manually rollback the entry in the changelog table then. If I don't, dbdeploy will assume the migration was successful on a subsequent try. So the question is, is there any way to get dbdeploy use transactions or can you suggest any other way to have phing rollback automatically when an error occurs? Note: I'm not that proficient with Phing, so if this involves writing a custom task, any example code or a url with further information is highly appreciated. Thanks

  Read the article

• Merge items in nanoc

  - by Gordon Potter

  I have been trying to use nanoc for generating a static website. I need to organize a complex arrangement pages I want to keep my content DRY. How does the concept of includes or merges work within the nanoc system? I have read the docs but I can't seem to find what I want. For example: how can I take two partial content items and merge them together into a new content item. In staticmatic you can do some like the following inside your page. = partial('partials/shared/navigation') How would a similar convention work within nanoc?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >