Search Results

Search found 1203 results on 49 pages for 'jack duluoz'.

Page 2/49 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Melting plastic around DC-in jack in laptop

  - by Ove

  I recently noticed that the plastic around the DC-in jack of my laptop was warped (melted) a little bit. Since I noticed, I have done some experiments, and saw that the metal tip of the charger heats up very much when I am gaming, or performing CPU-intensive work (it's so hot that i can't hold it between my fingers). When I am using Windows normally (web browsing, music, video), the tip is not hot. I tried using another charger from a compatible laptop, but its metal tip overheated as well, so the problem is not caused by the charger. I have been using this laptop for gaming for 1.5 years and I never had this problem. When gaming I always use a laptop cooler. Dust is not the problem (i cleaned out the dust), and the CPU and GPU temperatures are not higher than when I got the laptop. The only thing that is excessively hot is the charger tip. Because I bought my laptop from the USA, sending it to warranty and back would cost more than the laptop's value, so I need to fix it myself. I have googled around, and I saw that the problem might be the DC-in jack that is located on the motherboard of the laptop. I plan to take the laptop apart and see if it has become loose, and soldering it in place if it has. My questions for you are: Did anyone deal with this problem in the past? Did anyone manage to fix it? Is the DC-in jack the culprit in this case? Or is it possible for the problem to be caused by another part on the motherboard? Is there any way I can check the DC-in jack with a multimeter? What should I measure (resistance, etc)? EDIT: My laptop is a Sager NP5135 (aka Clevo B5130M). I also posted on NBR, including some pictures: link

  Read the article

• Headset undetected when plugged in

  - by tough

  I have recently installed Ubuntu 12.04 in my machine which was running windows 7. I have been trying to configure the audio to work exactly as it used to work in Windows but never been able to do so. I have followed this link exactly. I am still not getting the required configuration. aslamixer command shows me with 5 adjustable controls as shown below Master "adjustable" Speaker "adjustable" PCM "adjustable" Front "adjustable" AND Beep "adjustable" Mic Jack Mic In or Lin In S/PDIF OO "in a box" S/PDIF D OO "in a box" S/PDIF P DIGITAL or Analog M It does not detect the headset jack when plugged in. I here mean to say that the sound form the speakers does not go off when I plug in my headset jack. How can I make this working. Some other googling also did not help. I am on Hp Pavilion DV7 machine. The chip is IDT 92HD75B3X5 and the card is HDA ATI SB.

  Read the article

• 3.5mm headphone jack -> Component video?

  - by Isaac Waller

  Hello, I have a strange cord that has a male 3.5mm headphone jack on one side, and some component video and audio ouputs on the other. When I plug the headphone side into my computer, and the other side into my TV, I get audio across the cable, but no video. How can I send some video over the headphone jack in OS X? I know you can, because this cable is actually for a Beyblade toy and it somehow transferred video over this cable. Thanks, Isaac I think I found some more information (from Wikipedia:) "A four conductor version (of a 3.5mm headphone jack) is becoming a de facto standard output connector for compact camcorders, providing stereo sound plus a video signal." So how can I do this on Mac?

  Read the article

• SEO Tools - Jack-of-All-Trades

  These days on-line competition is becoming tougher so getting high ranking is a fundamental part of any web business strategy, regardless what your business really does. But how do you get your website to the top of search engine results pages?

  Read the article

• Linux: how to use Jellyfish from Jack Meterbridge?

  - by klox

  dear all, i have installed Meterbridge. But,i'm just need to use Jellyfish from this package. I changed the Meterbridge properties become: /usr/bin/meterbridge -t jf alsa_pcm:playback_1 alsa_pcm:playback_2 My problem come here, i can open the Jellyfish window but i can't show the wave from input jack. How should i do? have you ever try this? some tell me to set up the Jack Audio Connection Kit, But i don't understand how to do it because i'm new for this

  Read the article

• QJackCtl - Alsa Unknown driver

  - by user69458

  Here's my problem : I just have installed QJackCtl on my Ubuntu 12.04 and when I start Jack I got this issue : 12:01:22.769 /usr/local/bin/jackd -dalsa -dhw:0 -r44100 -p1024 -n3 -i1 -o2 Cannot connect to server socket err = Aucun fichier ou dossier de ce type Cannot connect to server socket jack server is not running or cannot be started Unknown driver "alsa" If anyone knows the solution It would help me a lot !

  Read the article

• Easy to install JACK GUI for Mac OS X

  - by Mr. Man

  Does anyone know of an easy to install GUI for JACK on Mac OS X?

  Read the article

• Mini-jack problem with Sony Vaio (running XP)

  - by qftme

  I have a five year old Sony Vaio laptop (vgn-fw31m) that has had impact damage to the audio-output mini-jack for about the last year or so. In a recent discussion with my brother, we wondered whether it would be possible to write a program that would enable windows to use the microphone mini-jack input as the audio-output? As I currently use this laptop for work I am not keen to risk pulling it apart in order to replace the components comprising the audio-out. I therefore 'hope' that a programming solution exists. I would really appreciate any advice on this and eagerly await your response. Kind regards, qftme :)

  Read the article

• 3.5 mm component video jack -> Ipod female connection?

  - by Jigs

  At my gym the treadmills all have ipod male cables hanging out of them so that you can plug in a video ipod and play a video directly to the screen on the treadmill. I own a non apple MP4 player is there an adapter that will go from a 3.5mm component video jack to a female ipod connector that will allow me to watch a film on the screen?

  Read the article

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• Configure TV Capture card to not use external audio jack for TV audio output

  - by Adam D.

  I had this working with MythTV on Ubuntu 9.1. Then a power surge killed the motherboard. After replacing the motherboard, ram and cpu, the card does not produce any audio except through the output jack on the back of the card. I do not want to use a cable to go from the back of the card to the audio in on the built in sound card of the new mother board. FYI, the old motherboard did not have an on-board sound card. There was a separate audio card installed. There's some configuration that has to be done to have it work the same way again. I just have no idea where to start. This is regarding wintv hauppauge mythtv linux ubuntu 9.10 audio

  Read the article

• No Sound from headphone jack

  - by Tural Teyyuboglu

  I have DELL Inspiron N5110 laptop. Using windows 8. Recently I got an issue: The problem is, when I insert headphones and microphone into laptop, I get only microphone inserted notification. Laptop detects microphone But no headphones. In fact, It mutes sound from it's speakers. But no sound from headphones too: I tested headphones separately: they're working well. I also, reinstalled windows default sound drivers and IDT High Definition Audio drivers several times. No success! The final decision is: There is no sound from headphone jack in laptop. Any suggestions?

  Read the article

• Linux based audio prodcuction tutorials

  - by thelinuxer

  I have been searching for a while for Linux based audio production tutorials. All I can find is tool based tutorials. For example I found tutorials on how to use jack, ardour, lmms ..etc. What I need is tutorials that teaches professional audio production with opensource/free tools, like those already available for protools and likes. If any one can guide me to any videos/articles available it would be highly appreciated. Thanks.

  Read the article

• Ubuntu 12.04 - No sound - HELP!

  - by Bruno Tacca

  I'm panicking... my sound stopped working after I tried to set-up my notebook speakers, plus two headphone jacks... My idea was to multichannel the sound to 3 channels, built-in speakers, and sound-card 2 headphone jacks. After a couple efforts I did it with 2 channels, speakers and 1 headphone jack, but the other wasn't working. After more tries and tries, sound stop working. I just want my sound back... crying like a baby on the floor. And, if possible, but not necessary, a simple guide to active the 3 channels. xD I will post the diagnosis according to https://help.ubuntu.com/community/SoundTroubleshootingProcedure STEP 1 Did it, still no sound. STEP 2 Did it, still no sound. STEP 3 and #STEP 4 (I removed the log cause there is a limit of characters to be posted.) The log can be found here: https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/238653 STEP 5 Rebooted, still no sound. STEP 6 Did it. In the Output Devices tab, nothing is muted. I play a music with the Rhythmbox Music Player, I don't hear anything but in the pavucontrol I can see in the Built-in Audio Analog Stereo a sound bar shaking... but, no sound. STEP 7 In alsamixer, AlsaMixer v1.0.25 Card: HDA Intel PCH Chip: Creative CA0132 information View: F3:[Playback] F4: Capture F5: All Item: Headphone [dB gain: 25.00, 25.00] Then, I have 5 columns Headphone, Speaker, PCM, S/PDIF, S/PDIF Default PCM A little weird when I try to mute the Headphone and the Speaker, here what happens: Starting both unmutted, mutting headphone cause speaker being mutted automaticaly. Starting both unmutted, mutting speaker cause headphone being mutted automaticaly. Starting both mutted, possible to unmute both separately. STEP 8 I cannot hear sound on both (headphone and/or speaker). STEP 9 Dual boot... Restarted, windows was with sound at max volume. Restarted again, still no sound at ubuntu. I heard something when ubuntu started, a little noise, then silence again. The sound icon always start mutted, after unmutting, I have no sound. STEP 10 I dont have this command in my ubuntu. STEP 11 Tried at STEP 8, no sound. There are no problem with jumpers or hardware, cause I have sound working on windows. STEP 12 No way to open my alienware and loss the warranty x.X" STEP 13 I think it's loaded, judging my the logs STEP 14 Alienware M17xR4, the hardware is listed in the logs above, at STEP 4. There are two headphone hacks, one with just an headphone printed above, and the other with an headset (with mic) printed, there is a mic jack too, and a spdif (optical) too. STEP 15 I dont want to enable S/PDIF STEP 16 I never used the HDMI output, yet... Thanks in advance. I hope I listed all the information you need.

  Read the article

• Computer SOMETIMES recognizes when headphones are plugged in.

  - by rcrobot

  Whenever I plug my headphones into my computer's front headphone jack, I get a weird situation. Sometimes, the computer will recognize the headphones and work properly. But other times, the computer will play sound through both the headphones and my monitor's speaker. When this happens, the sound section of the system settings does not list the headphones. I can fix the issue temporarily by wiggling the headphone port, but if it gets wiggled the wrong way again, then the issue returns. My PC's case is a Rosewill Challenger. I have tried multiple headphones and the same issue is there. I suspect that this might be a hardware related issue, but if there is any way to fix it with software, that would be helpful. This is what it looks like when everything is working properly: This happens when I wiggle the headphone port. I can quickly switch between these two by doing so:

  Read the article

• Debian sound on hdmi instead of jack

  - by Hans de Jong

  I installed debian (gnome) and i can't get my sound working. When i use inxi -A i get the following result: Audio: Card-1: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] driver: snd_hda_intel Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel Sound: Advanced Linux Sound Architecture ver: 1.0.24 My feeling tells me my sound output is on the HDMI instead of my jackplug on my motherboard. How can i change this to my motherboard sound output?

  Read the article

• 12.04 Ubuntu studio PREEMPT_RT kernel options

  - by Nate Iverson

  My audio processing needs require a preempt_rt kernel. I roughly followed the guide: https://wiki.ubuntu.com/KernelTeam/GitKernelBuild with a little help from: https://rt.wiki.kernel.org/index.php/RT_PREEMPT_HOWTO Currently I am using the 3.4 branch (which is the most recent at the time of this post): http://www.kernel.org/pub/linux/kernel/projects/rt/ I think I have a reasonable kernel config ( for my machine at least ). Multiple trials confirm I need the option: CONFIG_PREEMPT_RT_FULL=y I have the following questions: Is anyone maintaining a recent CONFIG_PREEMPT_RT_FULL kernel in a ppa? Is there any interest in providing a CONFIG_PREEMPT_RT_FULL in the official ubuntu-studio distribution? Does anyone have recent config pointers for a CONFIG_PREEMPT_RT_FULL kernel?

  Read the article

• Scheme homework Black jack help....

  - by octavio

  So I need to do a game of blackjack simulator, butt can't seem to figure out whats wrong with the shuffle it's suppose to take a card randomly from the pack the put it on top of the pack. The delete it from the rest. so : (ace)(2)(3)(4)(5)...(k) if random card is let say 5 (5)(ace)(2)(3)(4)(5)...(k) then it deletes the 2nd 5 (5)(ace)(2)(3)(4)(6)...(k) here is the code: (define deck '((A . C) (2 . C) (3 . C) (4 . C) (5 . C) (6 . C) (7 . C) (8 . C) (9 . C) (10 . C) (V . C) (Q . C) (K . C))) ;auxilliary function for shuffle let you randomly select a card. (define shuffAux (lambda (t) (define cardR (lambda (t) (list-ref t (random 13)))) (cardR t))) ;auxilliary function used to remove the card after the car to prevent you from removing the randomly selected from the car(begining of the deck). (define (removeDupC card deck) (delete card (cdr deck)) ) (define shuffle2ndtry (lambda (deck seed) (define do-shuffle (lambda (deck seed) (if (> seed 0)( (cons (shuffAux deck) deck) (removeDupC (car deck) deck) (- 1 seed)) (write deck) ) ) ) (do-shuffle deck seed))) (define (shuffle deck seed) (define cards (cons (shuffAux deck) deck)) (write cards) (case (> seed 0) [(#t) (removeDupC (car cards) (cdr cards)) (shuffle cards (- seed 1))] [(#f) (write cards)])) (define random (let ((seed 0) (a 3141592653) (c 2718281829) (m (expt 2 35))) (lambda (limit) (cond ((and (integer? limit)) (set! seed (modulo (+ (* seed a) c) m)) (quotient (* seed limit) m)) (else (/ (* limit (random 34359738368)) 34359738368)))))) ;function in which you can delete an element from the list. (define delete (lambda (item list) (cond ((equal? item (car list)) (cdr list)) (else (cons (car list) (delete item (cdr list))))))) (

  Read the article

• XSL Info - Can't find jack about it

  - by coffeeaddict

  I looked up XSL and can't figure out what exactly it's talking about. I see what it stands for. Is XSL even used anymore?

  Read the article

• VMWare Headphone Issue

  - by Ash_Geek_Pickney

  I am running VMWare Workstation Version 7 on a Windows 7 partition on a Macbook Pro. I have built a virtual XP machine within vmware to run some old music programs. The sound from my virtual machines comes out of my macbook speakers but the volume is not controllable using my macbook volume controls, only by using the volume control on the XP machine. My problem is that i need to use headphones, and when i plug a headphone jack into my macbook, the sound from my vmware virtual machines still comes out of the macbook speakers. I am baffled. Please help. Thanks in advance...

  Read the article

• How do I stop and repair a RAID 5 array that has failed and has I/O pending?

  - by Ben Hymers

  The short version: I have a failed RAID 5 array which has a bunch of processes hung waiting on I/O operations on it; how can I recover from this? The long version: Yesterday I noticed Samba access was being very sporadic; accessing the server's shares from Windows would randomly lock up explorer completely after clicking on one or two directories. I assumed it was Windows being a pain and left it. Today the problem is the same, so I did a little digging; the first thing I noticed was that running ps aux | grep smbd gives a lot of lines like this: ben 969 0.0 0.2 96088 4128 ? D 18:21 0:00 smbd -F root 1708 0.0 0.2 93468 4748 ? Ss 18:44 0:00 smbd -F root 1711 0.0 0.0 93468 1364 ? S 18:44 0:00 smbd -F ben 3148 0.0 0.2 96052 4160 ? D Mar07 0:00 smbd -F ... There are a lot of processes stuck in the "D" state. Running ps aux | grep " D" shows up some other processes including my nightly backup script, all of which need to access the volume mounted on my RAID array at some point. After some googling, I found that it might be down to the RAID array failing, so I checked /proc/mdstat, which shows this: ben@jack:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdb1[3](F) sdc1[1] sdd1[2] 2930271872 blocks level 5, 64k chunk, algorithm 2 [3/2] [_UU] unused devices: <none> And running mdadm --detail /dev/md0 gives this: ben@jack:~$ sudo mdadm --detail /dev/md0 /dev/md0: Version : 00.90 Creation Time : Sat Oct 31 20:53:10 2009 Raid Level : raid5 Array Size : 2930271872 (2794.53 GiB 3000.60 GB) Used Dev Size : 1465135936 (1397.26 GiB 1500.30 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Mar 7 03:06:35 2011 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 1 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K UUID : f114711a:c770de54:c8276759:b34deaa0 Events : 0.208245 Number Major Minor RaidDevice State 3 8 17 0 faulty spare rebuilding /dev/sdb1 1 8 33 1 active sync /dev/sdc1 2 8 49 2 active sync /dev/sdd1 I believe this says that sdb1 has failed, and so the array is running with two drives out of three 'up'. Some advice I found said to check /var/log/messages for notices of failures, and sure enough there are plenty: ben@jack:~$ grep sdb /var/log/messages ... Mar 7 03:06:35 jack kernel: [4525155.384937] md/raid:md0: read error NOT corrected!! (sector 400644912 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644920 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389686] md/raid:md0: read error not correctable (sector 400644928 on sdb1). Mar 7 03:06:35 jack kernel: [4525155.389688] md/raid:md0: read error not correctable (sector 400644936 on sdb1). Mar 7 03:06:56 jack kernel: [4525176.231603] sd 0:0:1:0: [sdb] Unhandled sense code Mar 7 03:06:56 jack kernel: [4525176.231605] sd 0:0:1:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Mar 7 03:06:56 jack kernel: [4525176.231608] sd 0:0:1:0: [sdb] Sense Key : Medium Error [current] [descriptor] Mar 7 03:06:56 jack kernel: [4525176.231623] sd 0:0:1:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed Mar 7 03:06:56 jack kernel: [4525176.231627] sd 0:0:1:0: [sdb] CDB: Read(10): 28 00 17 e1 5f bf 00 01 00 00 To me it is clear that device sdb has failed, and I need to stop the array, shutdown, replace it, reboot, then repair the array, bring it back up and mount the filesystem. I cannot hot-swap a replacement drive in, and don't want to leave the array running in a degraded state. I believe I am supposed to unmount the filesystem before stopping the array, but that is failing, and that is where I'm stuck now: ben@jack:~$ sudo umount /storage umount: /storage: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) It is indeed busy; there are some 30 or 40 processes waiting on I/O. What should I do? Should I kill all these processes and try again? Is that a wise move when they are 'uninterruptable'? What would happen if I tried to reboot? Please let me know what you think I should do. And please ask if you need any extra information to diagnose the problem or to help!

  Read the article

• ssh without password does not work for some users

  - by joshxdr

  I have a new RHEL4 Linux box that I am using to copy data to old Solaris 2.6 and RHEL3 Linux boxes with scp. I have found that with the same setup, it works for some users but not for others. For user jane, this works fine: jane@host1$ ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/osborjo/.ssh/identity debug1: Offering public key: /mnt/home/osborjo/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). for user jack it does not: jack@host1 ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/oper1/.ssh/identity debug1: Offering public key: /mnt/home/oper1/.ssh/id_rsa debug1: Authentications that can continue: publickey,password,keyboard-interactive I have looked at the permissions for all the keys and files, they look the same. Since I am using home directories mounted by NFS, the keys for both the remote host and the local host are in the same directory. This is how things look for jane: jane@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jane operator 394 Jan 27 16:28 authorized_keys -rw------- 1 jane operator 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jane operator 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jane operator 1205 Jan 27 16:46 known_hosts For user jack: jack@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jack engineer 394 Jan 27 16:28 authorized_keys -rw------- 1 jack engineer 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jack engineer 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jack engineer 1205 Jan 27 16:46 known_hosts As a last ditch effort, I copied the authorized_keys, id_rsa, and id_rsa.pub from jill to jack, and changed the username in authorized_keys and id_rsa.pub with vi. It still did not work. It seems there is something different between the two users but I cannot figure out what it is.

  Read the article

• 11 Types of Developers

  - by Lee Brandt

  Jack Dawson Jack Dawson is the homeless drifter in Titanic. At one point in the movie he says, “I figure life’s a gift, and I don’t intend on wasting it.” He is happy to wander wherever life takes him. He works himself from place to place, making just enough money to make it to his next adventure. The “Jack Dawson” developer clings on to any new technology as the ‘next big thing’, and will find ways to shoe-horn it in to places where it is not a fit. He is very appealing to the other developers because they want to try the newest techniques and tools too, He will only stay until the new technology either bores him or becomes problematic. Jack will also be hard to find once the technology has been implemented, because he will be on to the next shiny thing. However, having a Jack Dawson on your team can be beneficial. Jack can be a great ally when attempting to convince a stodgy, corporate entity to upgrade. Jack usually has an encyclopedic recall of all the new features of the technology upgrade and is more than happy to interject them in any conversation. Tom Smykowski Tom is the neurotic employee in Office Space, and is deathly afraid of being fired. He will do only what is necessary to keep the status quo. He believes as long as nothing changes, his job is safe. He will scoff at anything new and be the naysayer during any change initiative. Tom can be useful in off-setting Jack Dawson. Jack will constantly be pushing for change and Tom will constantly be fighting it. When you see that Jack is getting kind of bored with a new technology and Tom has finally stopped wetting himself at the mere mention of it, then it is probably the sweet spot of beginning to implement that new technology (providing it is the right tool for the job). Ray Consella Ray is the guy who built the Field of Dreams. He took a risk. Sometimes he screwed it up, but he knew he didn’t want to end up regretting not attempting it. He constantly doubted himself, but he knew he had to keep going. Granted, he was doing what the voices in his head were telling him to do, but my point is he was driven to do something that most people considered crazy. Even when his friends, his wife and even he told himself he was crazy, somewhere inside himself, he knew it was the right thing to do. These are the innovators. These are the Bill Gates and Steve Jobs of the world. The take risks, they fail, they learn and the get better. Obviously, this kind of person thrives in start-ups and smaller companies, but that is due to their natural aversion to bureaucracy. They want to see their ideas put into motion quickly, and withdrawn quickly if it doesn’t work. Short feedback cycles are essential to Ray. He wants to know if his idea is working or not. He wants to modify or reverse his idea if it is not working or makes things worse. These are the agilistas. May I always be one.

  Read the article

• As an IT contractor, is it better to be a specialist or a jack-of-all-trades? [on hold]

  - by alimac83

  I've just entered the contracting market as a web developer and I've having a tough time figuring out how to plan for the future. Several developers I've worked with in the past have told me to become a specialist in one technology/area in order to secure the big contracts. However I've also heard from other sources that it's better to spread your expertise so that you're not limited in the types of work you can go for. Personally I've pretty much been involved in both back and front-end technologies during the course of my career, with slight variations in the weighting of each depending on the job. I don't really have a favourite - I enjoy it all. My question is mainly to the experienced contractors though: Do you feel specialising has helped your career or is it better to know a bit of everything? Thanks

  Read the article

• Is there a way to make the speaker silent while the headphone-jack keeps working? 12.04LTS

  - by Cees

  The PC I am working on is in a loud environment. If I need sound, I use the headphone. On my own account this is easy: I mute the speaker in the sound-setting. I am not the only user, others use the Guest-session. And that's what this question about: Is it possible to turn off the speaker by default on a guest-session AND leave the headphone-output working? If yes, how can I fix it? I tried to loosen the speaker (hardware) connection but it is soldered to the mainboard. The soundcard on the PC is: HDA Intel at 0xfea78000 irq 44 /proc/asound/pcm ---------------------------+ ¦00-00: ALC662 rev1 Analog : ALC662 rev1 Analog : playback 1 : capture 1¦ ¦00-02: ALC662 rev1 Analog : ALC662 rev1 Analog : capture 1 Ubuntu 12.04LTS is running on the system, my account has all the (admin) rights

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >