Search Results

Search found 151 results on 7 pages for 'johan'.

Page 2/7 | < Previous Page | 1 2 3 4 5 6 7  | Next Page >

  • iwconfig usage for WEP access point?

    - by johan elmander
    I would like to use my wifi doggle in my pc (ubuntu 12.04). I am able to connect to my access point through the GUI. I would like to do the same in the terminal. My access point uses WEP. So I typed the following commands iwconfig wlan0 mode managed key 6d6f6e6579 iwconfig wlan0 essid "AccessPoint" dhclient wlan0 after typing dhclient wlan0 it waits like 1-2 min then outputs nothing and cannot connect to the Access Point. iwconfig output: wlan0 IEEE 802.11bgn ESSID:"AccessPoint" Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long timit:7 RTS thr=2347 B Fragment thr:off Encryption key:6D6F-6E65-79 Power Management:off I would appreciate any suggestion

    Read the article

  • Android SDK Manager and AVD Manager doesn't have the correct information and fails to update on Ubun

    - by Johan Carlsson
    I'm trying to install Android SDK on Ubuntu but fail when I try to use the SDK Manager and AVD Manager to install Android platforms. I've downloaded: android-sdk_r04-linux_86.tgz The I start the SDK Manager and AVD Manager (UI) according to the README file: ./tools/android And I get the following Installed Packages: - Install SDK Tools, revision 4 Available Packages: - https://dl-ssl.google.com/android/repoisotry/repository.xml - This repository requires a more recent version of the Tools. Please update- - Android SDK Tools, revision 4 - Archive for Linux (comment: funny since rev 4 seems to be what's installed this is what seems to be installed) Now doing an update of the Android SDK Tools, revision 4 or everything results in 99% progress and then the application hangs. Here's the console feedback: johanc@johan-desktop:~/android/android-sdk-linux_86$ tools/android Starting Android SDK and AVD Manager No command line parameters provided, launching UI. See 'android --help' for operations from the command line. Error: null In the app I choose to upgate the following package: Package Description Android SDK Tools, revision 4 Archive Description Archive for Linux Size: 15 MiB SHA1: 99380c9330c1c3728c836206947350cc00fa28c2 Site https://dl-ssl.google.com/android/repository/repository.xml The console output reads (and the app hangs at 99%): Exception in thread "Installing Archives" java.lang.AssertionError at com.android.sdkuilib.internal.tasks.ProgressTask.incProgress(ProgressTask.java:97) at com.android.sdkuilib.internal.repository.UpdaterData$2.run(UpdaterData.java:358) at com.android.sdkuilib.internal.tasks.ProgressTask$1.run(ProgressTask.java:135)

    Read the article

  • publishing asp.net website give "Object reference not set to an instance of an object." error

    - by Johan
    Good day I am using VS 2008 I am getting fed up with this error. I have search all over the web and tried every possible suggestion to this error I could find. 1. delete app_code, build, add files back, publish. (did not work) 2. delete temporary asp.net files (did not work) in the end I even tried the command line and get the following stacktrace. error ASPRUNTIME: Object reference not set to an instance of an object. [NullReferenceException]: Object reference not set to an instance of an object. at System.Web.Compilation.BuildManager.CopyPrecompiledFile(VirtualFile vfile, String destPhysicalPath) at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect ory sourceVdir, String destPhysicalDir, Boolean topLevel) at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect ory sourceVdir, String destPhysicalDir, Boolean topLevel) at System.Web.Compilation.BuildManager.CopyStaticFilesRecursive(VirtualDirect ory sourceVdir, String destPhysicalDir, Boolean topLevel) at System.Web.Compilation.BuildManager.PrecompileAppInternal(VirtualPath star tingVirtualDir) at System.Web.Compilation.BuildManager.PrecompileApp(VirtualPath startingVirt ualDir) at System.Web.Compilation.BuildManager.PrecompileApp(ClientBuildManagerCallba ck callback) at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa llback callback) at System.Web.Compilation.BuildManagerHost.PrecompileApp(ClientBuildManagerCa llback callback) at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil dManagerCallback callback, Boolean forceCleanBuild) at System.Web.Compilation.ClientBuildManager.PrecompileApplication(ClientBuil dManagerCallback callback) at System.Web.Compilation.Precompiler.Main(String[] args) I used the following command line: aspnet_compiler.exe -p d:\code\websites\brokerweb -v / d:\code\websites\published -f -c -errorstack -u Please help as I cannot publish this site at all at present and it worked fine for quite a long time now before this stupid error. Regards Johan

    Read the article

  • How to rename an existing Grails application

    - by Johan Pelgrim
    Hi there, Does anybody know how to (easily) "rename" an existing grails application? I'm running into this because my PaaS provider does not allow me to delete a subscription... So I want to deploy my application under a different name. Of course, I can do this manually, but I think it might be a useful 'top-level' script (i.e. "grails rename-app newappname") Manual hints: When I do a "grails create-app myappname" I can see the myappname exists in the following files (and filenames)... Of course this is done by the create-app script, which replaces @...@ tokens in the template. I guess once they are replaced, it's not trivial to do a rename. ./.project: <name>myappname</name> ./application.properties:app.name=myappname ./build.xml:<project xmlns:ivy="antlib:org.apache.ivy.ant" name="myappname" default="test"> ./ivy.xml: <info organisation="org.example" module="myappname"/> ./myappname-test.launch:<stringAttribute key="org.eclipse.jdt.launching.PROJECT_ATTR" value="myappname"/> ./myappname.launch:<listEntry value="/myappname"/> ./myappname.launch:<listEntry value="<?xml version="1.0" encoding="UTF-8"?> <runtimeClasspathEntry containerPath="org.eclipse.jdt.launching.JRE_CONTAINER" javaProject="myappname" path="1" type="4"/> "/> ./myappname.launch:<stringAttribute key="org.eclipse.jdt.launching.PROJECT_ATTR" value="myappname"/> ./myappname.launch:<stringAttribute key="org.eclipse.jdt.launching.VM_ARGUMENTS" value="-Dbase.dir="${project_loc:myappname}" -Dserver.port=8080 -Dgrails.env=development"/> ./myappname.tmproj: <string>myappname.launch</string> And of course... the top-level directory name is "myappname" Any hints, or information about ongoing initiatives in this area are welcome Greetz, Johan

    Read the article

  • git repository sync between computers, when moving around?

    - by Johan
    Hi Let's say that I have a desktop pc and a laptop, and sometimes I work on the desktop and sometimes I work on the laptop. What is the easiest way to move a git repository back and forth? I want the git repositories to be identical, so that I can continue where I left of at the other computer. I would like to make sure that I have the same branches and tags on both of the computers. Thanks Johan Note: I know how to do this with SubVersion, but I'm curious on how this would work with git. If it is easier, I can use a third pc as classical server that the two pc:s can sync against. Note: Both computers are running Linux. Update: So let's try XANI:s idea with a bare git repo on a server, and the push command syntax from KingCrunch. In this example there is two clients and one server. So let's create the server part first. ssh user@server mkdir -p ~/git_test/workspace cd ~/git_test/workspace git --bare init So then from one of the other computers I try to get a copy of the repo with clone: git clone user@server:~/git_test/workspace/ Initialized empty Git repository in /home/user/git_test/repo1/workspace/.git/ warning: You appear to have cloned an empty repository. Then go into that repo and add a file: cd workspace/ echo "test1" > testfile1.txt git add testfile1.txt git commit testfile1.txt -m "Added file testfile1.txt" git push origin master Now the server is updated with testfile1.txt. Anyway, let's see if we can get this file from the other computer. mkdir -p ~/git_test/repo2 cd ~/git_test/repo2 git clone user@server:~/git_test/workspace/ cd workspace/ git pull And now we can see the testfile. At this point we can edit it with some more content and update the server again. echo "test2" >> testfile1.txt git add testfile1.txt git commit -m "Test2" git push origin master Then we go back to the first client and do a git pull to see the updated file. And now I can move back and forth between the two computers, and add a third if I like to.

    Read the article

  • Java Spotlight Episode 76: Pro Java FX2 - A Definative Guide to Rich Clients with Java Technology

    - by Roger Brinkley
    Tweet An interview with the authors of Pro Java FX2: A Definative Guide to Rich Clients with Java Technology. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Angela Caicedo has created 3 new Java FX screen cast videos on java UTube channel: Part 1: Building your First Java FX Application with Netbeans 7.1, Part 2: Building your First Java FX Application with Netbeans 7.1, and Getting Started with Scene Builder.  Events March 26-29, EclipseCon, Reston, USA March 27, Virtual Developer Days - Java (Asia Pacific (English)),9:30 am to 2:00pm IST / 12:00pm to 4.30pm SGT  / 3.00pm - 7.30pm AEDT April 4-5, JavaOne Japan, Tokyo, Japan April 12, GreenJUG, Greenville, SC April 17-18, JavaOne Russia, Moscow Russia April 18–20, Devoxx France, Paris, France April 26, Mix-IT, Lyon, France, May 3-4, JavaOne India, Hyderabad, India Feature InterviewPro JavaFX 2: A Definitive Guide to Rich Clients with Java Technology is available from Amazon.com in either paperback or on the Kindle.James L. (Jim) Weaver is a Java and JavaFX developer, author, and speaker with a passion for helping rich-client Java and JavaFX become preferred technologies for new application development. Books that Jim has authored include Inside Java, Beginning J2EE, and Pro JavaFX Platform, with the latter being updated to cover JavaFX 2.0. His professional background includes 15 years as a systems architect at EDS, and the same number of years as an independent developer. Jim is an international speaker at software technology conferences, including the JavaOne conferences in San Francisco and São Paulo. Jim blogs at http://javafxpert.com, tweets @javafxpert. Weiqi Gao is a principal software engineer with Object Computing, Inc., in St. Louis, MO. He has more than 18 years of software development experience and has been using Java technology since 1998. He is interested in programming languages, object-oriented systems, distributed computing, and graphical user interfaces. He is a presenter and a member of the steering committee of the St. Louis Java Users Group. Weiqi holds a PhD in mathematics. Stephen Chin is chief agile methodologist at GXS and a technical expert in client UI technologies. He is lead author on the Pro Android Flash title and coauthored the Pro JavaFX Platform title, which is the leading technical reference for JavaFX. In addition, Stephen runs the very successful Silicon Valley JavaFX User Group, which has hundreds of members and tens of thousands of online viewers. Finally, he is a Java Champion, chair of the OSCON Java conference, and an internationally recognized speaker featured at Devoxx, Codemash, AnDevCon, Jazoon, and JavaOne, where he received a Rock Star Award. Stephen can be followed on twitter @steveonjava and reached via his blog: http://steveonjava.com.Dean Iverson has been writing software professionally for more than 15 years. He is employed by the Virginia Tech Transportation Institute, where he is a rich client application developer. He also has a small software consultancy called Pleasing Software Solutions, which he cofounded with his wife. Johan Vos started to work with Java in 1995. As part of the Blackdown team, he helped port Java to Linux. With LodgON, the company he cofounded, he has been mainly working on Java-based solutions for social networking software. Because he can't make a choice between embedded development and enterprise development, his main focus is on end-to-end Java, combining the strengths of backend systems and embedded devices. His favorite technologies are currently Java EE/Glassfish at the backend and JavaFX at the frontend. Johan's blog can be followed at http://blogs.lodgon.com/johan, he tweets at http://twitter.com/johanvos. Mail Bag What’s Cool Gerrit Grunwald's SteelSeries FX Experience Tools Canned Animations ComboBox

    Read the article

  • SQLRally Nordic gets underway

    - by Rob Farley
    PASS is becoming more international, which is great. The SQL Community has always been international – it’s not as if data is only generated in North America. And while it’s easy for organisations to have a North American focus, PASS is taking steps to become international. Regular readers will be aware that I’m one of three advisors to the PASS Board of Directors, with a focus on developing PASS as a more global organisation. With this in mind, it’s great that today is Day 1 of SQLRally Nordic, being hosted in in Sweden – not only a non-American country, but one that doesn’t have English as its major language. The event has been hosted by the amazing Johan Åhlén and Raoul Illyés, two guys who I met earlier this year, but the thing that amazes me is the incredible support that this event has from the SQL Community. It’s been sold out for a long time, and when you see the list of speakers, it’s not surprising. Some of the industry’s biggest names from Microsoft have turned up, including Mark Souza (who is also a PASS Director), Thomas Kejser and Tobias Thernström. Business Intelligence experts such as Jen Stirrup, Chris Webb, Peter Myers, Marco Russo and Alberto Ferrari are there, as are some of the most awarded SQL MVPs such as Itzik Ben-Gan, Aaron Bertrand and Kevin Kline. The sponsor list is also brilliant, with names such as HP, FusionIO, SQL Sentry, Quest and SolidQ complimented by Swedish companies like Cornerstone, Informator, B3IT and Addskills. As someone who is interested in PASS becoming global, I’m really excited to see this event happening, and I hope it’s a launch-pad into many other international events hosted by the SQL community. If you have the opportunity, thank Johan and Raoul for putting this event on, and the speakers and sponsors for helping support it. The noise from Twitter is that everything is going fantastically well, and everyone involved should be thoroughly congratulated! @rob_farley

    Read the article

  • Link rate between EMC DAE and HBA

    - by Johan Christensson
    I have a EMC DAE (KTN-STL4) drive cage directly connecconnected to a HP Proliant server using a QLogic QLE2560 HBA. I'm using copper cable between the HBA card and the DAE. On the controller card in the DAE there is a label that states "4Gb". I'm guessing that this means 4Gbit/s. But if I set the HBA card to "Auto speed" it negotiate 2Gbit/s, and if I hard set it to 4Gbit/s I end up with no link. Why is this? Isn't the DAE controller card capebel of link speed higher then 2Gbit/s or is it the copper cable that limits the speed, or is it the interface used between the DAE and Qlogic HBA that is the problem? I have been browsing for HSSDC-FC converters and they always seems to på rated at ~2Gbit/s. If this is the limit, why does it say 4Gb on the controller cards in the DAE?

    Read the article

  • How do I set up ZScreen to upload images to my mediawiki?

    - by Johan
    I've set up a mediawiki with all the correct settings and enabled image uploading. When I do this manually this all works OK. I want to be able to upload screenshots automatically into my mediawiki using ZScreen. There is an option to do this: I press Test..., this work OK, however I'm unable to tell ZScreen to to actually get the picture into my mediawiki. There's no option to select mediawiki as my destination. How do I setup zscreen to upload to my mediawiki?

    Read the article

  • How to correctly use DERIVE or COUNTER in munin plugins

    - by Johan
    I'm using munin to monitor my server. I've been able to write plugins for it, but only if the graph type is GAUGE. When I try COUNTER or DERIVE, no data is logged or graphed. The plugin i'm currently stuck on is for monitoring bandwidth usage, and is as follows: /etc/munin/plugins/bandwidth2 #!/bin/sh if [ "$1" = "config" ]; then echo 'graph_title Bandwidth Usage 2' echo 'graph_vlabel Bandwidth' echo 'graph_scale no' echo 'graph_category network' echo 'graph_info Bandwidth usage.' echo 'used.label Used' echo 'used.info Bandwidth used so far this month.' echo 'used.type DERIVE' echo 'used.min 0' echo 'remain.label Remaining' echo 'remain.info Bandwidth remaining this month.' echo 'remain.type DERIVE' echo 'remain.min 0' exit 0 fi cat /var/log/zen.log The contents of /var/log/zen.log are: used.value 61.3251953125 remain.value 20.0146484375 And the resulting database is: <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1269936605 </lastupdate> <!-- 2010-03-30 09:10:05 BST --> <ds> <name> 42 </name> <type> DERIVE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 61.3251953125 </last_ds> <value> NaN </value> <unknown_sec> 5 </unknown_sec> </ds> <!-- Round Robin Archives --> <rra> <cf> AVERAGE </cf> <pdp_per_row> 1 </pdp_per_row> <!-- 300 seconds --> <params> <xff> 5.0000000000e-01 </xff> </params> <cdp_prep> <ds> <primary_value> NaN </primary_value> <secondary_value> NaN </secondary_value> <value> NaN </value> <unknown_datapoints> 0 </unknown_datapoints> </ds> </cdp_prep> <database> <!-- 2010-03-28 09:15:00 BST / 1269764100 --> <row><v> NaN </v></row> <!-- 2010-03-28 09:20:00 BST / 1269764400 --> <row><v> NaN </v></row> <!-- 2010-03-28 09:25:00 BST / 1269764700 --> <row><v> NaN </v></row> <snip> The value for last_ds is correct, it just doesn't seem to make it into the actual database. If I change DERIVE to GAUGE, it works as expected. munin-run bandwidth2 outputs the contents of /var/log/zen.log I've been all over the (sparse) docs for munin plugins, and can't find my mistake. Modifying an existing plugin didn't work for me either.

    Read the article

  • would unexpected power cuts harm the Linux OS?

    - by Johan Elmander
    I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

    Read the article

  • BIND - zone not loaded du to errors

    - by Johan Barelds
    After upgrading from Ubuntu 8.04 to 10.04 my DNS isn't working properly anymore. I keep getting this error when I run named-checkzone example.com /var/cache/bind/example.com.zone.db zone example.com/IN: NS 'mx002a.example.com' has no address records (A or AAAA) zone example.com/IN: not loaded due to errors. in /var/cached/bind/example.com.db $TTL 3D @ IN SOA mx002a.example.com. chantra.example.com. ( 200608081 ; serial, todays date + todays serial # 8H ; refresh, seconds 2H ; retry, seconds 4W ; expire, seconds 1D ) ; minimum, seconds ; ; mx002a.example.com IN A 192.168.85.19 example.com. IN NS mx002a.example.com. mx001 60 IN A 192.168.85.17 mx001 60 IN A 192.168.85.18

    Read the article

  • Very slow first handshake Apache

    - by Johan Larsson
    Any one having any ideas where should I start to fix this issue, the first handshake take sometimes up to 20s, but refreshes after that takes only 0.9s. The setup, 100/10 Mbps Windows OS 4GB RAM Intel Core 2 @ 3.0 GHz And 7200 RPM HDD Apache 2.4 No SSL Mod_Security Enabled Mod_Deflate Enabled Mod_Expires Enabled Mod_ReWrite Enabled PHP & MySQL on same machine. I have seen much slower machines preforming better, therefor I think my problem is ony an optimization issue.

    Read the article

  • AD GIT SELinux RHEL 6 : Can not get SELinux to allow connetion to git

    - by Johan Sörell
    I have a problem with SELinux! I have installed git on Red Hat Enterprise 6 with AD group control and SSL Cert . Everything works fine if I do setenforce 0 ( set SELinux in detection only mode ) or if I do semanage permissive -a httpd_t (Set httpd_t in detection only mode) I do not want to use this on my git production server. Is there anyone out there who can help we with SELinux? Below is some info that you might need to be able to help me: All help I can get would be apriciated: This is the output of ls -lZa /preproduction/git/repositories/ ls -lZa /preproduction/git/repositories/ drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 . drwxr-xr-x. apache apache unconfined_u:object_r:file_t:s0 .. drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 playground drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 shamrock.git drwxr-xr-x. apache apache unconfined_u:object_r:httpd_sys_rw_content_t:s0 test Here is the out put of getsebool -a |grep -i httpd getsebool -a |grep -i httpd allow_httpd_anon_write --> off allow_httpd_mod_auth_ntlm_winbind --> off allow_httpd_mod_auth_pam --> off allow_httpd_sys_script_anon_write --> off httpd_builtin_scripting --> on httpd_can_check_spam --> off httpd_can_network_connect --> off httpd_can_network_connect_cobbler --> off httpd_can_network_connect_db --> off httpd_can_network_memcache --> off httpd_can_network_relay --> off httpd_can_sendmail --> off httpd_dbus_avahi --> on httpd_enable_cgi --> on httpd_enable_ftp_server --> off httpd_enable_homedirs --> off httpd_execmem --> off httpd_read_user_content --> off httpd_setrlimit --> off httpd_ssi_exec --> off httpd_tmp_exec --> off httpd_tty_comm --> on httpd_unified --> on httpd_use_cifs --> off httpd_use_gpg --> off httpd_use_nfs --> off Tis is the status of : sestatus sestatus SELinux status: enabled SELinuxfs mount: /selinux Current mode: enforcing Mode from config file: enforcing Policy version: 24 Policy from config file: targeted

    Read the article

  • Can unexpected power loss harm a Linux install?

    - by Johan Elmander
    I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

    Read the article

  • Why are external domains appearing in my apache logs?

    - by Johan
    I've got several log entries that refer to an external domain - mainly a Russian search engine (http://www.yandex.ru/) How are these appearing in my logs? 82.146.58.53 - - [10/Jun/2010:00:49:11 +0000] "GET http://www.yandex.ru/ HTTP/1.0" 200 8859 "http://www.yandex.ru/" "Opera/9.80 (Windows NT 5.1; U; ru) Presto/2.5.22 Version/10.50"` 82.146.59.209 - - [10/Jun/2010:01:54:10 +0000] "GET http://www.yandex.ru/ HTTP/1.0" 200 8859 "http://www.yandex.ru/" "Mozilla/5.0 (Windows; U; Windows NT 5.1; ru; rv:1.9.2.2) Gecko/20100316 Firefox/3.6.2"` 82.146.41.7 - - [10/Jun/2010:02:55:34 +0000] "GET http://www.yandex.ru/ HTTP/1.0" 200 8859 "http://www.yandex.ru/" "Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1045 Safari/532.5" 125.45.109.166 - - [09/Jun/2010:11:04:17 +0000] "GET http://proxyjudge1.proxyfire.net/fastenv HTTP/1.1" 404 1010 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)"

    Read the article

  • Home network with two isolated separate subnets, running on cablemodem/router and WRT-router.

    - by Johan Allgoth
    I have a new connection with a nice new router/cable-modem. I'd like to setup it up optimally and needs some pointers. I am a complete n00b when it comes to routing. I want to end up with two separate subnets, 10.1.2.0/24 and 192.168.1.0/24 each available on their own wireless channel/SSID. Both firewalled. I want my wired computers on the gigabit switch, optimally with public ips. I want to be able to reach 192.168.1.0/24 from 10.1.2.0/24, but not vice versa. Everyone should have internet access. Hardware and capabilities: Netgear CG3100. Handles cable connection. Gigabit switch. 802.11n. Can do DHCP, firewall, NAT etc. Can choose subnet. Can turn of NAT and if so hand out up to 4 public ips. Somewhat challenged when it comes to configuration. WRT-router. Runs DD/Open-WRT very stable. 100 Mbit switch. 802.11.g Can do DHCP, firewall, NAT etc. Can choose subnet. Highly configurable. I hope to be able to keep 10.1.2.0/24 on the CG3100, for speed reasons and 192.168.0.0/24 on the WRT-router for quota and user control reasons. On my 10.1.2.0/24 network I plan on running servers for various services. Should I turn of NAT on the WRT-router? Or on the cable modem? Activate what in that case? Is double NAT always f-ed up?

    Read the article

  • Web Farm Framework - Adding servers are offline

    - by Johan Wikström
    My problem is that im trying to setup a server farm but the nodes all come up as offline. I dont get a connection error saying that the servername is wrong, but get "offline" after it "test connection" I have: - Setup firewalls rules to allow Remote and file share on Domain and private network - Installed WWF 2.0 on both servers - Account that im using is a domain account that is Administrator on both machines. www01 is the same server as the controller below, but same results if i try www02 as primary. Any ideas?

    Read the article

  • Simple queries occasionally running very slowly

    - by Johan
    I have some very simple queries that occasionally run very slowly. The table viewed_sites has about 10 - 20 rows. Running EXPLAIN ANALYZE always gives a runtime of less than 3 milliseconds. When the query is run automatically (every 10 seconds) it occasionally takes over a second to run. The query: INSERT INTO ga.viewed_sites (site_id) VALUES ('gop2') The table: CREATE TABLE viewed_sites ( site_id character varying(4) NOT NULL, last_viewed timestamp with time zone DEFAULT now() NOT NULL ); The (occasional) log result: 2010-05-24 15:47:55 UTC LOG: duration: 1044.632 ms statement: INSERT INTO ga.viewed_sites (site_id) VALUES ('gop2') It's a horribly vague question, but what could be causing this? I suppose it comes down to CPU, RAM, HDD or some combination of the above. Postgresql 8.3, Ubuntu 8.04 Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz 2 GiB RAM

    Read the article

  • How to rsync a large file, with as little CPU and bandwidth expense as possible?

    - by Johan Allgoth
    I have a 500 GB file that I plan on backing up remotely. The file changes often. I'll be rsyncing it from a desktop to a server. Both can run rsync client or server. What is the proper command for this? The ones I've tried sofar has been taking forever or simply acted strange. Example and results: rsync -cv --partial --inplace --no-whole-file /desktop/file1 myserver.com::module/file1 Seems to work, but only if I do it twice (?!). Also, slow. Does the above command do the checksumming on both computers, or only on the sending one? Is it correct otherwise?

    Read the article

  • Not getting IP from ISP on Multicast Network

    - by Johan Nielsen
    Im having an odd issue with my ISP (COMX.dk) I have a managed access gateway box (Telsay) with three 8P8C ports for use with Internet and Ip-Tv (respectively on different VLANS (so does my ISP tell me)) To utilize a port you will need to register your device's mac address through an online interface. You will then get your device paired with a static ip. I am using one port actively and I have registered another device (router). The router is configured to listen for an active dhcpd on the network. When my router get a lease I get a private ip 192.168.2.2 (not the one bound to my mac) which is odd! I unconnected my router from the gateway and connected my laptop directly. Same thing happened - I was given a private address. I did a port scan on the gateway and found port 80 to be open and browsed to the ip. I was then presented with a management interface of a Belkin wireless router (HMMM!!!!) <--by the way, not my gear At this point I called the ISP to let them know of my issue/findings - Only to be replied "Well, we cant see any rogue dhcp servers" (thinking to myself, well I can) I then decided that it could be fun to try the other port of my gateway, only to experience the same. So I reconnected my router and used the remaining port to make an observer(wireshark promic etc.) I am able to see my router trying to discover a dhcp server but I can also see my ISP's IGMP and PIMv2 packages just repeating the same pattern. Hello...Hello...Hello :) So I called them again, only to get the same response, "we dont see any rogue dhcp's...we cant see the host you are talking to (mac address of the Belkin router)...you are definitively connected through wireless?!?(no im not, no such thing as a wireless wire - i thought to myself)" My questions is, What is going on? (besides from what im reporting here) What am I seeing that the don't? What can I tell them in order for them to resolve mine/their issue?

    Read the article

  • Edit Top 200 Rows SQL Pane equivalent in Visual Studio 2012 SQL Server Tools "View Data"

    - by Johan Kronberg
    I've always used Edit Top 200 Rows and then edited the query in the SQL Pane of the 2008 Management Studio to find the rows I want to edit data for. Now I have the tools inside Visual Studio 2012 and want to use be able to change the query after right clicking a table and choosing "View Data" but I can't see that this is possible. Has the "SQL Pane" feature been removed or am I not seeing something?

    Read the article

< Previous Page | 1 2 3 4 5 6 7  | Next Page >