Search Results

Search found 220 results on 9 pages for 'luis velasco'.

Page 2/9 | < Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >

• HDMI video connection cuts top and bottom borders of screen

  - by Luis Alvarado

  Ok this is an extension of another problem I had with a VGA connection and an Nvidia Geforce GT 440 card. Here is goes the explanation of this particular problem: I have a Soneview 32' TV. This TV has many connections including VGA (First reason I bought it), HDMI (Second reason but did not have a HDMI cable at that time) and DVI. I have had this TV for little over a month now, actually I had it to celebrate the release of Ubuntu 11.10 and started using it exactly on that date (I know too much fan there but hey, I like geek stuff). I started using it with the VGA cable. After 2 weeks I bought an Nvidia GT440 card. The previous 9500GT was working correctly with no problems whatsoever. I installed the GT440 and the first problem that I encountered using this latest card is mentioned here: Nvidia GT 440 black screen problem when loading lightdm greeter. The solution to this problem was to actually disconnect then connect again the VGA cable. This would result in the screen showing me the lightdm screen for my login. If I did not disconnect then connect the cable I could be there forever thinking that there is no video signal. I got tired of looking for answers that did not work and for solutions that made me literally have to install Ubuntu again. I just went and bought a HDMI cable and changed the VGA one for that one. It worked and I did not have to disconnect/connect the cable but now I have this problem when using any resolution. My normal resolution is 1920x1080 (This TV is 1080HD) so in VGA I could use this resolution with no problem, but on HDMI am getting the borders cut out. Here is a pic: As you can see from the PIC, the Launcher icons only show less than 50% of their witdh. Forget about the top and bottom parts, I can access them with the mouse but I can not visualize them in the screen. It is like it's outside of the TVs view. Basically there is like 20 to 30 pixels gone from all sides. I searched around and came to running xrand --verbose to see what it could detect from the TV. I got this: cyrex@cyrex:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 175, current 1920 x 1080, maximum 1920 x 1080 default connected 1920x1080+0+0 (0x164) normal (normal) 0mm x 0mm Identifier: 0x163 Timestamp: 465485 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1920x1080 (0x164) 103.7MHz *current h: width 1920 start 0 end 0 total 1920 skew 0 clock 54.0KHz v: height 1080 start 0 end 0 total 1080 clock 50.0Hz 1920x1080 (0x165) 105.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 55.1KHz v: height 1080 start 0 end 0 total 1080 clock 51.0Hz 1920x1080 (0x166) 107.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 56.2KHz v: height 1080 start 0 end 0 total 1080 clock 52.0Hz 1920x1080 (0x167) 109.9MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 57.2KHz v: height 1080 start 0 end 0 total 1080 clock 53.0Hz 1920x1080 (0x168) 112.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 58.3KHz v: height 1080 start 0 end 0 total 1080 clock 54.0Hz 1920x1080 (0x169) 114.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 59.4KHz v: height 1080 start 0 end 0 total 1080 clock 55.0Hz 1680x1050 (0x16a) 98.8MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 58.8KHz v: height 1050 start 0 end 0 total 1050 clock 56.0Hz 1680x1050 (0x16b) 100.5MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 59.9KHz v: height 1050 start 0 end 0 total 1050 clock 57.0Hz 1600x1024 (0x16c) 95.0MHz h: width 1600 start 0 end 0 total 1600 skew 0 clock 59.4KHz v: height 1024 start 0 end 0 total 1024 clock 58.0Hz 1440x900 (0x16d) 76.5MHz h: width 1440 start 0 end 0 total 1440 skew 0 clock 53.1KHz v: height 900 start 0 end 0 total 900 clock 59.0Hz 1360x768 (0x171) 65.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 48.4KHz v: height 768 start 0 end 0 total 768 clock 63.0Hz 1360x768 (0x172) 66.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 49.2KHz v: height 768 start 0 end 0 total 768 clock 64.0Hz 1280x1024 (0x173) 85.2MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.6KHz v: height 1024 start 0 end 0 total 1024 clock 65.0Hz 1280x960 (0x176) 83.6MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 65.3KHz v: height 960 start 0 end 0 total 960 clock 68.0Hz 1280x960 (0x177) 84.8MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.2KHz v: height 960 start 0 end 0 total 960 clock 69.0Hz 1280x720 (0x178) 64.5MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 50.4KHz v: height 720 start 0 end 0 total 720 clock 70.0Hz 1280x720 (0x179) 65.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.1KHz v: height 720 start 0 end 0 total 720 clock 71.0Hz 1280x720 (0x17a) 66.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.8KHz v: height 720 start 0 end 0 total 720 clock 72.0Hz 1152x864 (0x17b) 72.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.1KHz v: height 864 start 0 end 0 total 864 clock 73.0Hz 1152x864 (0x17c) 73.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.9KHz v: height 864 start 0 end 0 total 864 clock 74.0Hz ....Many Resolutions later... 320x200 (0x1d1) 10.2MHz h: width 320 start 0 end 0 total 320 skew 0 clock 31.8KHz v: height 200 start 0 end 0 total 200 clock 159.0Hz 320x175 (0x1d2) 9.0MHz h: width 320 start 0 end 0 total 320 skew 0 clock 28.0KHz v: height 175 start 0 end 0 total 175 clock 160.0Hz 1920x1080 (0x1dd) 333.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 173.9KHz v: height 1080 start 0 end 0 total 1080 clock 161.0Hz If it helps, the Refresh Rate at 1920x1080 is 60. There is a flickering effect at this resolution using HDMI but not VGA which I imagine is related to the borders cut off issue am asking here. I have also done the following but this will only solve the problem on lower resolutions than 1920x1080 or on others TV (My father has a Sony TV where this problem is also solved): NVIDIA WAY Go to Nvidia-Settings and there will be an option that will have more features if a HDMI cable is connected. In the next pic the option is DFP-1 (CNDLCD) but this name changes depending on what device the PC is connected to: Uncheck Force Full GPU Scaling What this will do for resolutions LOWER than 1920x1080 (At least in my case) is solve the flickering problem and fix the borders cut by the monitor. Save to Xorg.conf file the changes made after changing to a resolution acceptable to your eyes. TV WAY If you TV has OSD Menu and this menu has options for scanning the screen resolution or auto adjusting to it, disable them. Specifically the option about SCAN. If you have an option for AV Mode disable it. Basically disable any option that needs to scan and scale the resolution. Test one by one. In the case of my father's TV this did it. In my case, the Nvidia solved it for lower resolutions. NOTE: In the case this is not solved in the next couple of weeks I will add this as the answer but take into consideration that the issue is still active with 1920x1080 resolutions.

  Read the article

• How to remove the Bubble Notification of Empathy from the Notification Area

  - by Luis Alvarado

  There is a Bubble notification that appears in the notification area apart from the Mail Icon Message. I only want one notification icon telling me when a new message has arrived. Right now as seen in the image: I have the MAIL Icon (Which is White right now but turns blue when a new message arrives) and the First green icon, which is the bubbling talk icon that I want to remove. When a message appears both of them tell me a new message has arrives. I only want the MAIL icon (The white one between the Keyboard and the Bluetooth Icon)

  Read the article

• Exadata Storage Server software upgrade is a new era in Patching

  - by Luis Moreno Campos

  Since it was first released, Exadata Storage Server software has been releasing patch releases like every software on the planet. Storage administrators would have to do this, but by some weird tradition, no matter what level of technology, if it says "Oracle" in it, IT Managers will immediately associate this with a task for the DBA. Not the case, but if it falls onto a DBA lap, fear no evil.The last patch released for Exadata Cells, is a true master piece in patching technology. This sentence is not mine, it's from both the customer and the partner that witnessed how 3 Exadata Cells where patch in less than 4 hours, after 12 months of without a single upgrade.The patch manager that takes care of everything will patch not only the software but also the firmware and the operating system. And you know it will all work out because back in the lab everything was already tested.All you have to do is stare at the 3 Sun ILOM Windows from the 3 cells and watch as they boot and reboot, patch and fix to the latest versions all layers of the storage machines. It's a new era in Patching technology!LMC

  Read the article

• Consolidation in Exadata

  - by Luis Moreno Campos

  View imageIf you are wondering how can you consolidate different databases inside an Exadata solution, then you can do one or both of the following:- Register and Come to this event: Oracle Enterprise Cloud Summit (10th February 2011)- Read about Oracle's Private Cloud Database Consolitation strategy here.If you are reading this after the event has taken place check out these docs:- White Paper about Instance Caging- Oracle Database Resource Manager technical white paperLMC

  Read the article

• How to remove individual webapps from Launcher

  - by Luis Alvarado

  Today my launcher looks like a long vertical bar of icons. I have 14 webapp icons on the launcher but there is no option to remove them or an option to no include them (Or even an option to merge them as I asked in a previous question). Is there an option, without having to disable the whole webapp idea, to remove individual webapps from the launcher. Forgot to add that the option to Unlock from Launcher does not appear, but only on the webapps. On the rest of the launcher icons it appears correctly. This is an image of the actual problem (Thanks to koma):

  Read the article

• How to customize Unity Launcher's background

  - by Luis Alvarado - The Wolverine

  In this question I do not want to customize the launcher for each workspace, or change the animations or behaviors of the icons. I only want to change how the background of the Launcher looks. Let me show you what I mean: If I do not open the Dash, the launcher looks like the following: It looks like this because I have a background that has gray, black and white colors. So Unity tries to accommodate the launcher to contrast with it. Now when I open the Dash, the launcher looks like this: What I want is to make the launcher look the same as if my Dash were open (Darker, richer background). I thought maybe to invert the colors of an opened Dash with a closed one, but that the end I do not care if the colors do change when I open the Dash, so long as the darker richer version stays. Is it possible to do this, to make the background stay with a darker color like shown in the pictures above?

  Read the article

• Oracle's Thirteen Engineered Systems

  - by Luis Moreno Campos

  You already need a catalogue to keep up with the many new stuff coming out from Oracle Engineered from factory.In the Exadata portfolio you have 4 systems:- Quarter Rack X2-2 Database Machine- Half-Rack X2-2 Database Machine- Full-Rack X2-2 Database Machine- X2-8 Database MachineBut if Exadata presents a stunning portfolio, Exalogic doesn't fall behind on that by putting out 6 versions: 3 sizes (Quarter, Half and Full) with x86 processors and the same 3 sizes with SPARC based processors.Finally we have 3 new systems called SPARC Superclusters where Solaris 11 was re-engineered to take more out of the power of Infiniband: "Available in the next calendar year, the Oracle SPARC Supercluster will be available in T3-2, T3-4 and M5000-based configurations".I see Oracle delivering on it's promise to tightly integrate Hardware and Software to work closer together.

  Read the article

• Blue people on flash videos (Youtube, Vimeo, etc...)

  - by Luis Alvarado

  After a recent update I am seeing EVERYONE in any video blue. Only the people are blue. First I was thinking it was an April Fools joke about the song Blue from Eiffel 65 but it has been 4 days already. I tested on another 2 PCs, same problem. It started about a week ago I think. I am using Flash 11.2.202.228 with Firefox 11. The problem is not there if I use Google Chrome. In Chrome the Flash Player is 11.2.31.118

  Read the article

• How to set Default Web Browser, Mail Client, Video Player & Music Player in the system

  - by Luis Alvarado

  I am trying to find the option that sets, for the whole system the default Web Browser, Mail Client, Video Player and Music Player instead of having to do it for each type of file. I knew where the option was in 11.04 but somehow I can not find it again. Just to not get anymore confused I am not talking about right clicking a file then changing the "Open With" to the one I want. The option I am looking for affects everything in general, so if I change, for example, the default video player to VLC, all movies will be watched with VLC. I am using Unity.

  Read the article

• How to customize the gnome classic panel

  - by Luis Alvarado

  First the picture: As you can see in the image, the color used for the icons and words Applications and Places (In spanish in this case) they have a different background dark gray color than the rest of the panel. Also the icons look rather bigger in that panel. Now my questions are: Can the background colors be customized so they look the same all the way in the panel. Can the icons be somehow minimized a little so they do not look strange (bigger actually) How to edit the way to add icons to the panel. I have to actually have to press the ALT key then right click on it to add something. That extra key is not friendly at all. In this particular case am trying to help an older man start in Ubuntu. Unity is too much for him but Gnome is friendlier for him (Learning curve is not the best for older people.. specially 68+ year old people).

  Read the article

• What is a fast way to darken the vertices I'm rendering?

  - by Luis Cruz

  To make a lighting system for a voxel game, I need to specify a darkness value per vertex. I'm using GL_COLOR_MATERIAL and specifying a color per vertex, like this: glEnable(GL_COLOR_MATERIAL); glBegin(GL_QUADS); glColor3f(0.6f, 0.6f, 0.6f); glTexCoord2f(...); glVertex3f(...); glColor3f(0.3f, 0.3f, 0.3f); glTexCoord2f(...); glVertex3f(...); glColor3f(0.7f, 0.7f, 0.7f); glTexCoord2f(...); glVertex3f(...); glColor3f(0.9f, 0.9f, 0.9f); glTexCoord2f(...); glVertex3f(...); glEnd(); This is working, but with many quads it is very slow.. I'm using display lists too. Any good ideas in how to make vertices darker?

  Read the article

• Video Recorder Tool (Screencast) that is up to date

  - by Luis Alvarado

  I was looking at this post How to create a screencast? which mentions some of the Video Recorders (Screencast) that I was looking for but some of them are more than 8 months old with not one single update made to them. Am looking for a Screencast that is at least update recently and that I know that if I keep using it I could count on it being updated. The most important part is video recording but sound is good too. Maybe a windows area, mouse tracking, etc.. But it needs to be up to date and not abandoned or very old. And of course that works in 11.10 and has in mind to work in 12.04.

  Read the article

• How to do firmware updates/upgrades to a Blackberry

  - by Luis Alvarado

  I have several clients/friends that have Blackberry and wish to update their phone but without installing Windows. Any windows. Just doing it from Ubuntu. How can this be done. The update the mention is for the firmware and new programs for the phone. I do not know much about Blackberries since am more of an android guy. At the end they want support for upgrade/update the Blackberry from within Linux and sync it to the PC (Backups, upload/download stuff to and from it). I have seen 2 types of projects working on this: Linberry (From Venezuela ;) ) - http://linberry.webcindario.com/ Barry - http://www.netdirect.ca/software/packages/barry but so far neither offers updating the firmware or downloading updates. Are there any Ubuntu blackberry projects I am not aware of.

  Read the article

• How to mount a disk that supports Samba sharing (Using Disk Utility)

  - by Luis Alvarado - The Wolverine

  This might be a tricky question but here is the objective: Manage to mount a disk/partition automatically without (or at least trying to avoid): Editing any Samba configuration file Editing the fstab file and to make it a little bit harder, this needs to be done with the options for "Mount Options" in the Disk Utility: Note that if left as it is, every time a user mounts a partition/disk and then tries to share a folder in it, Windows users can see the share but can not access it, with a permission warning appearing. The point of all of this is to find the most user friendly (Oriented towards a GUI) way of enabling a partition to be mounted, accessed by the local user (Read, Write, Execute) and to also be able to, when needed, share a folder and have no problems reading/writing on it from another Ubuntu/Windows/Mac remote computer (Assuming both are in the same LAN network).

  Read the article

• Do I need an Ubuntu certification to teach Ubuntu

  - by Luis Alvarado

  I have several students that want a course of Ubuntu. I would like to know the following very important points: Do I need an Ubuntu certification to certified my students afterwards that they know Ubuntu. Can I use the Ubuntu logo, an Ubuntu symbol for the certificate that I would give out? Do I need permissions? Where should I ask for permission? Is this possible? Is there an Ubuntu certificate format available that I could use? Is there a site where I could sign to teach and promote Ubuntu to new users (Become an Ubuntu teacher)? What information and permissions might I need from Ubuntu or Canonical if I wanted to give courses about Ubuntu?

  Read the article

• Benefits of sharing one IP, or prefarably assigning a new IP?

  - by Luis Yang

  I think I am lost but not found yet, please as regards this very topic; my issue was that I bought a new VPS using WHM optimised and it's just one domain meaning one IP. All I want to know is the benefit with sharing one IP to many domains I created for the users (remembering the IP is for the root) or is it of a disadvantage? Probably help me too with knowing if it's prefarable to create/assign a new IP to each new domain created for users?

  Read the article

• How to use the Nautilus search option

  - by Luis Alvarado

  In Nautilus if I press CTRL+F I get a search box that helps me search in the current directory and sub directories for specific names, but what if I want to: Find ALL files (including files without extensions) Find a file without an extension (Without the dot symbol or without any other name/extension separator) Find a file with/without a special character Find all files that start/not start with a character Find all files that end/not end with a character Find all files that start/no start with a character but end/not end with a character Find only files/folders Find files with specific text in them Find files with less/more/equal than/to X size Find files modified/created in X date All of this searches in the Nautilus search box I mentioned before. I ask this since the KDE's search is much better in this and gives pretty good freedom in searching for virtually anything, so I might not be learning how to use the Nautilus search option correctly. Note that I am talking about the first search done since some of this options show AFTER a search is done so the user can narrow it down more by doing a more specific search inside the Search results (for the first search). I am asking here how to do any of the search options I mentioned above in the first search.

  Read the article

• Where could one go to suggest new packages for Ubuntu

  - by Luis Alvarado

  Sometimes one finds a package that looks very good and can help in some ways, but the package is not found in the repositories of Ubuntu or in any PPA site. Apart from creating a PPA, how and where can one suggest a package to be included to Ubuntu in a future or present version. Some quick examples might be: Komodo (Another alternative to Notepad++): http://www.liberiangeek.net/2012/01/komodo-edit-the-best-notepad-alternative-in-ubuntu/ mkahawa (Cafe Management System): http://sourceforge.net/projects/mkahawa/ And many others that can help in making users use Ubuntu more.

  Read the article

• Ubuntu 12.10 Unity and Gnome not showing correctly after log in

  - by Luis Rodriguez

  Hello Ubuntu community. Since last Saturday when I was about to log into my ubuntu session as always using Unity interface, I came across with something that never happened to me before. When I logged in, the screen only showed the Desktop wallpaper but neither the bar from the top screen neither the dash bar from the left side appear, and after a few minutes of being logged in, I found myself being spammed with Ubuntu errors windows, over and over again. I logged out using ctrl+alt+del and tried my Gnome sessio. But I got exactly the same problem. I'm only able to use Gnome Classic and Classic (No Effects) Can anybody help? Hope a reply soon, and thanks in advance.

  Read the article

• How does process priority influence a process

  - by Luis Alvarado - The Wolverine

  Assuming we have read the following question: Change niceness (priority) of a running process and we know about root, non-root permissions: What actually happens when a running process (Through renice) or a new process (Through nice) gets its priority changed to a positive/negative value it previously had. Does it mean more memory is assign to it? Does more CPU power go to that particular process? Does it reduce any timing for resources for that process? What happens when the process priority change?

  Read the article

• Configuring Transmission for faster download

  - by Luis Alvarado

  I have tested on the same PC with the same torrent/magnet links the following Torrent Clients: Transmission Ktorrent Deluge qBittorrent Vuze After 7 days of testing I noticed that the only one that took longer to start downloading and to keep an optimum/max download speed was Transmission. It was the slowest of them all to download the same torrents or magnet links which I tested 8 torrents and 4 magnet links from different sites and the one that took the most to start downloading or start after a pause/resume event. The other 4 just took less than 2 seconds for example to start downloading and to download the same content between 50% less time to 80% less time. I think that Transmission has the same capabilities about downloading/resuming than the other torrent clients but it may be because of some configuration I need to do to get the same speed and effect than the others. In my tests all torrent clients were tested with their default configurations. No changes were made. They were tested on the same PC, with the same network connection in the same time periods. So I am thinking that Transmission just needs a little bit of configuration tunning. I also set the ports for use to the same one for each. Checked the router for any blocking and anything related to the network. What options can I change to make it so Transmission resumes a download faster (grabs the seeds faster) and keeps a fast download all the time (Stays with the seeds that offer the best connection for example). Both of which by the look of it are features that the rest of the torrent clients do already.

  Read the article

• Exadata X3 In-Memory Database Machine: To be or not to be

  - by Luis Moreno Campos

  Since Larry Ellison announced Oracle Exadata X3 as the new generation of the Database Machine, he established the product in the In-Memory Database arena. And that annoyed some people. We all know that In-Memory Databases are the ones that *only* execute in memory and use the other layers of storage for persistency (mainly disk). Oracle database has always been a technology that uses memory as a caching mechanism and that hasn't change nor it will change with Oracle Database 12c. So this is the central point of fuss when it comes to announcing an Engineered Systems as In-Memory Database, when in fact it still runs Oracle Database, not vanilla but still the same product. Let me tell you purist people out there: when you find no new ground breaking point to get all excited about you decide to bash it, and go against its claims. It's not like a car manufacturer that launches a mini-van in the market and calls it a Sports Car, we are talking about a fundamental change in the ILM stack: level 2 of caching is now self sufficient. It's not DRAM? Who cares, still let's you put in flash amounts of data not done up until now, so I guess Oracle can name it whatever Larry wants because in the end it's something never done before. Now let's imagine that you hop on the pure In-Memory Database bandwagon. You would be stuck with a database technology that lags behind the Oracle Database hundreds of light years in man/hours innovations and features. Do you really want to travel back in time? Remember, the first rule about time travelling is that "Security is not Guaranteed". Your choice. LMC

  Read the article

• DI and hypothetical readonly setters in C#

  - by Luis Ferrao

  Sometimes I would like to declare a property like this: public string Name { get; readonly set; } I am wondering if anyone sees a reason why such a syntax shouldn't exist. I believe that because it is a subset of "get; private set;", it could only make code more robust. My feeling is that such setters would be extremely DI friendly, but of course I'm more interested in hearing your opinions than my own, so what do you think? I am aware of 'public readonly' fields, but those are not interface friendly so I don't even consider them. That said, I don't mind if you bring them up into the discussion Edit I realize reading the comments that perhaps my idea is a little confusing. The ultimate purpose of this new syntax would be to have an automatic property syntax that specifies that the backing private field should be readonly. Basically declaring a property using my hypothetical syntax public string Name { get; readonly set; } would be interpreted by C# as: private readonly string name; public string Name { get { return this.name; } } And the reason I say this would be DI friendly is because when we rely heavily on constructor injection, I believe it is good practice to declare our constructor injected fields as readonly.

  Read the article

• Hidden files in Nautilus after extracting ISO

  - by Luis Alvarado

  I need to first point to the image below to explain a bit about what I find weird here: I extracted the informacion from an ISO I from Nautilus I could only see two folders but from the terminal I can see the rest of the files and folders. This folders do not have the . character in from of them to hide them from plain sight. When I try to "Show hidden files" in Nautilus, Nautilus closes itself. It does not show the hidden folders or files. Somehow they are hidden without using the normal dot in the beginning of the name. The have my user permission but no way of seeing them from Nautilus. I can interact with them but the fact that they appear hidden when I can see them inside the ISO and after extracting them they disappear is what confuses me. What permission or setting makes this folders appear hidden and does not let Nautilus show them and like I said before, trying to show them with the "Show hidden files" option crashes Nautilus and exits it. Forcing me to have to open Nautilus again from the Launcher.

  Read the article

• How to diagnose network speed drops

  - by Luis Alvarado

  Here is the image of System Monitor first: The graph shows the cycle the connection goes through. After 10 to 15 seconds it drops to 0 KB/S, then goes up to the Max speed (120 KB/S) then it repeats. dmesg shows the following during that time: [ 6066.757211] wlan0: send auth to 00:26:5a:b5:05:7b (try 1/3) [ 6066.804405] wlan0: authenticated [ 6066.804578] rt2800pci 0000:02:01.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6066.805016] wlan0: associate with 00:26:5a:b5:05:7b (try 1/3) [ 6066.809218] wlan0: RX AssocResp from 00:26:5a:b5:05:7b (capab=0x431 status=0 aid=1) [ 6066.809581] wlan0: associated [ 6066.810203] bridge-eth0: disabling the bridge on dev down [ 6066.810239] bridge-eth0: down [ 6066.810254] bridge-eth0: detached [ 6066.810309] /dev/vmnet: open called by PID 1679 (vmnet-bridge) [ 6066.810322] /dev/vmnet: hub 0 does not exist, allocating memory. [ 6066.810355] /dev/vmnet: port on hub 0 successfully opened [ 6066.810366] bridge-wlan0: device is wireless, enabling SMAC [ 6066.810369] bridge-wlan0: up [ 6066.810372] bridge-wlan0: attached [ 6067.010285] userif-2: sent link down event. [ 6067.010290] userif-2: sent link up event. This also repeats with Wired or Wireless connections. How can I diagnose this changes in the network efficiently.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >