Search Results

Search found 66 results on 3 pages for 'magnetic dud'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• Why is my second monitor not working?

  - by StampedeXV

  Since I have my new computer, I have a very weird problem. Facts: New Computer: Motherboard: ASRock Z77 Pro 3 Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i5-3570 Windows 7 64bit 500W beQuiet special edition (92% efficiency) 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 2 2 magnetic HDDs + 1 SDD 1 DVD-R Old Computer: Motherboard: Asus P55 something Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i7-870 Windows 7 64bit 550W Corsair 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 3 2 magnetic HDDs + 1 SDD 1 DVD-R On the old computer it worked fine with two monitors. Moving to the new (I took the same Graphics-card) it only works with one. The weird thing I mentioned is: not matter which one. But if I put both there, only one is available. There is no reaction at the start (where normally (at least if I remember correctly) the monitor shortly went from "standby" to "on"). Windows does not recognize a second monitor in the Device Manager. I have the latest drivers for Motherboard and Graphics-card. I have the latest BIOS drivers. I am out of ideas. Edit: completed computer setup

  Read the article

• Is it possible to run my Windows Form application in Windows CE platform?

  - by Fakhrul

  I am new in Windows CE development and never done it yet. Need some advise from the expert in here. In our current project, we are developing a client-server application. The client side is using a windows form application that are base on Windows XP OS while the server is a web base application. This question are related to the client application (Windows Form). This application are using Sql Server Express Edition for data storage. The data is stored in XML object format. It also can transfer a data from client to server via web service. It also interact with hardware such as Magnetic Stripe Reader, Contactless Smart Card Reader, and a thermal printer. Most of the communication between hardware device and systems are base on Serial Port. It is use standard app.config for the configuration and is a multi threaded application. There is a new requirement to use a Handheld device which is use a Windows CE platform. This handheld included the required equipment such as Contactless Smart Card Reader, Printer and Magnetic Stripe Reader. Instead of developing a new client application, is it possible to me to convert my current application that are base on Windows XP to Windows CE? If yes, how can I do that? If no, is it any other brilliant suggestion to do this? Thanks in advance. Software Engineer

  Read the article

• Which static electricity prevention tools do actually work?

  - by Boris_yo

  I need a device that would discharge static electricity from my body in order to safely work with electronics. I have looked and found some that interested me, but I don't know whether they work: Anti-Static Wrist Strap Anti-Static Release Discharger Keychain Anti-Dissipative Wrist Strap Anti-Static Rubber Finger Stalls Which of above mentioned actually do something? Do I also need and anti-static screw box? It has holes that screws get put in. Will I need magnetic screwdriver to pull screws out?

  Read the article

• RHEL 5.x SCSI Driver .img update for initrd.img

  - by zmische

  I have production DB server (RHEL 5.1) with LSI Megaraid driver loaded during setup via DUD (Driver Upd Diskett). Now I'd like to update kernel and other packeges to 5.4 version. I also downloaded new LSI SCSI driver (megasr-13.11.0922.2009-1-rhel50-u4-all.img ). Could you explain the necessary steps to make this driver visible on boot for new kernel (lets assume, that I've already update kernel to 5.4)? I read the article on Redhat - "How do I add a driver to the initrd.img". Does it contain all the steps I need? Thanks in advance!

  Read the article

• 3 Ways to Make Steam Even Faster

  - by Chris Hoffman

  Have you ever noticed how slow Steam’s built-in web browser can be? Do you struggle with slow download speeds? Or is Steam just slow in general? These tips will help you speed it up. Steam isn’t a game itself, so there are no 3D settings to change to achieve maximum performance. But there are some things you can do to speed it up dramatically. Speed Up the Steam Web Browser Steam’s built-in web browser — used in both the Steam store and in Steam’s in-game overlay to provide a web browser you can quickly use within games – can be frustratingly slow on many systems. Rather than the typical speed we’ve come to expect from Chrome, Firefox, or even Internet Explorer, Steam seems to struggle. When you click a link or go to a new page, there’s a noticeable delay before the new page appears — something that doesn’t happen in desktop browsers. Many people seem to have made peace with this slowness, accepting that Steam’s built-in browser is just bad. However, there’s a trick that will eliminate this delay on many systems and make the Steam web browser fast. This problem seems to arise from an incompatibility with the Automatically Detect Proxy Settings option, which is enabled by default on Windows. This is a compatibility option that very few people should actually need, so it’s safe to disable it. To disable this option, open the Internet Options dialog — press the Windows key to access the Start menu or Start screen, type Internet Options, and click the Internet Options shortcut. Select the Connections tab in the Internet Options window and click the LAN settings button. Uncheck the Automatically detect settings option here, then click OK to save your settings. If you experienced a significant delay every time a web page loaded in Steam’s web browser, it should now be gone. In the unlikely event that you encounter some sort of problem with your network connection, you could always re-enable this option. Increase Steam’s Game Download Speed Steam attempts to automatically select the nearest download server to your location. However, it may not always select the ideal download server. Or, in the case of high-traffic events like big seasonal sales and huge game launches, you may benefit from selecting a less-congested server. To do this, open Steam’s settings by clicking the Steam menu in Steam and selecting Settings. Click over to the Downloads tab and select the closest download server from the Download Region box. You should also ensure that Steam’s download bandwidth isn’t limited from here. You may want to restart Steam and see if your download speeds improve after changing this setting. In some cases, the closest server might not be the fastest. One a bit farther away could be faster if your local server is more congested, for example. Steam once provided information about content server load, which allowed you to select a regional server that wasn’t under high-load, but this information no longer seems to be available. Steam still provides a page that shows you the amount of download activity happening in different regions, including statistics about the difference in download speeds in different US states, but this information isn’t as useful. Accelerate Steam and Your Games One way to speed up all your games — and Steam itself —  is by getting a solid-state drive and installing Steam to it. Steam allows you to easily move your Steam folder — at C:\Program Files (x86)\Steam by default — to another hard drive. Just move it like you would any other folder. You can then launch the Steam.exe program as if you had never moved Steam’s files. Steam also allows you to configure multiple game library folders. This means that you can set up a Steam library folder on a solid-state drive and one on your larger magnetic hard drive. Install your most frequently played games to the solid-state drive for maximum speed and your less frequently played ones to the slower magnetic hard drive to save SSD space. To set up additional library folders, open Steam’s Settings window and click the Downloads tab. You’ll find the Steam Library Folders option here. Click the Add Library Folder button and create a new game library on another hard drive. When you install a game in Steam, you’ll be asked which library folder you want to install it to. With the proxy compatibility option disabled, the correct download server chosen, and Steam installed to a fast SSD, it should be a speed demon. There’s not much more you can do to speed up Steam, short of upgrading other hardware like your computer’s CPU. Image Credit: Andrew Nash on Flickr     

  Read the article

• Ever wonder why Earth spins?

  - by Gopinath

  Have you ever wonder why Earth spins on its axis and completes a revolution every day? Is there any force that keeps Earth spinning? Is that because of  Gravity or any Magnetic force? Check out this video to learn why Earth spins and the basics of physics behind the magic If you find that above video is in simple English and it’s not convincing physicist inside you, lets hear from a NASA scientist in the embedded video. A NASA scientist explains how Earth rotation has started, how fast it was billions of years ago and what caused it to slow down to 24 hours to complete a revolution   Thanks @pinaldev

  Read the article

• why write-enable ring

  - by SpashHit

  Here's an "interview question" that while ostensibly about hardware really does inform a software design principal as well. Computers used to (still do I guess, somewhere) use magnetic tape reels to store data. There was a plastic accessory you could attach to a tape reel called a "write-enable ring". If the tape had such a ring, the tape drive allowed writing to the tape... if not, it only allowed read access. Why was the choice to design the system in this way? Why not have a "write protect ring" instead, with the opposite effect?

  Read the article

• Why a write-enable ring?

  - by SpashHit

  Here's an "interview question" that while ostensibly about hardware really does inform a software design principal as well. Computers used to (still do I guess, somewhere) use magnetic tape reels to store data. There was a plastic accessory you could attach to a tape reel called a "write-enable ring". If the tape had such a ring, the tape drive allowed writing to the tape... if not, it only allowed read access. Why was the choice to design the system in this way? Why not have a "write protect ring" instead, with the opposite effect?

  Read the article

• Application Interface between a PC and an embedded device

  - by sasayins

  Hi, How can I make an application interface so that a PC application can communicate to an embedded device like a POS terminal? Like for example, an embedded device like POS terminal that has an embedded linux as an OS. Then I want a PC application to communicate in that POS terminal and access its module hardware like for example its magnetic stripe reader. What implementation should I create in the device, should I use CORBA or something related in that technology so that a PC application can communicate in the POS terminal? Many thanks.

  Read the article

• Printing checks in .Net from blank stock (Not pre-printed checks)

  - by ggonsalv

  I would like to take blank secure stock paper and convert it in to a check. I know you can get magnetic toner and print MICR. The question is the actual font to use or should i get a package and send the data to it to print the check?

  Read the article

• Are there any data remanence issues with flash storage devices?

  - by matt

  I am under the impression that, unlike magnetic storage, once data has been deleted from a flash drive it is gone for good but I'm looking to confirm this. This is actually relating to my smart phone, not my computer, but I figured it would be the same for any flash type memory. Basically, I have done a "Factory Reset" on the phone, which wipes the Flash ROM clean but I'm wondering is it really clean or is the next person that has my phone, if they are savvy enough going to be able to get all my passwords and what not? And yes, I am wearing my tinfoil hat so the CIA satellites can't read my thoughts, so I'm covered there.

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

• How can I read a reel-to-reel tape from the 1970s?

  - by Joe Wreschnig

  A close friend of my mother worked at DEC in the 1970s and 1980s. She recently passed away, and in sorting through her estate, my mother discovered some reel-to-reel magnetic tape. We are curious about what might be on it. I haven't yet seen a picture of it, but Wikipedia tells me this is most likely DECtape. Is there any chance the data on it is still good? It was not preserved with great care, but as far as we know it has also never been particularly abused. Just left in a box and moved a few times. If the data is still valid, do we need to dig up a PDP or VAX or read it, or is there a more modern option?

  Read the article

• Why some recovery tools are still able to find deleted files after I purge Recycle Bin, defrag the disk and zero-fill free space?

  - by Ivan

  As far as I understand, when I delete (without using Recycle Bin) a file, its record is removed from the file system table of contents (FAT/MFT/etc...) but the values of the disk sectors which were occupied by the file remain intact until these sectors are reused to write something else. When I use some sort of erased files recovery tool, it reads those sectors directly and tries to build up the original file. In this case, what I can't understand is why recovery tools are still able to find deleted files (with reduced chance of rebuilding them though) after I defragment the drive and overwrite all the free space with zeros. Can you explain this? I thought zero-overwritten deleted files can be only found by means of some special forensic lab magnetic scan hardware and those complex wiping algorithms (overwriting free space multiple times with random and non-random patterns) only make sense to prevent such a physical scan to succeed, but practically it seems that plain zero-fill is not enough to wipe all the tracks of deleted files. How can this be?

  Read the article

• Experience with Intel X25-M 160GB and Oracle

  - by derobert

  We're considering building an Oracle database with 12 Intel X25-M G2 160GB drives in software RAID10. It'd be running Linux. Database gets some very heavy write activity during the early morning data load, other than that it is mostly read-only (and the read load is fairly minimal). We're currently running on 11 150GB Velociraptors (also Linux software RAID10), and are hoping the X25-M will speed up the data load. We currently have redo on different disks than the rest of the data. I'm wondering a few things: Any experience with using X25-M drives for databases? The X25-E are unfortunately beyond our budget. Would it hurt to separate redo off to some magnetic (non-SSD) drives, say 2 (raid1) or 4 (raid10) Seagate Constellations?

  Read the article

• Announcing Berkeley DB Java Edition Major Release

  - by Eric Jensen

  Berkeley DB Java Edition 5.0 was just released. There are a number of new features, enhancements, and options in there that our users have been asking for. Chief among them is a new class called DiskOrderedCursor, which greatly increases performance of systems using spinning platter magnetic hard drives. A number of users expressed interest in this feature, including Alex Feinberg of LinkedIn. Berkeley DB Java Edition is part of Project Voldemort, a distributed key/value database used by LinkedIn. There have been many other improvements and optimizations. Concurrency is significantly improved, as is the performance of update and delete operations. New and interesting methods include Environment.preload, which allows multiple databases to be preloaded simultaneously. New Cursor methods enable for more effective searching through the database. We continue to enhance Berkeley DB Java Edition’s High Availability as well. One new feature is the ability to open a replicated node read-only when the master is unavailable. This can allow critical systems to continue offering some functionality, even during a network or master node failure. There’s a lot more in release 5.0. I encourage you to take a look at the extensive changelog yourself. As always, you can download the new release and try it out here: http://www.oracle.com/technetwork/database/berkeleydb/downloads/index.html

  Read the article

• RPi and Java Embedded GPIO: Using Java to read input

  - by hinkmond

  Now that we've learned about using Java code to control the output of the Raspberry Pi GPIO ports (by lighting up LEDs from a Java app on the RPi for now and noting in the future the same Java code can be used to drive industrial automation or medical equipment, etc.), let's move on to learn about reading input from the RPi GPIO using Java code. As before, we need to start out with the necessary hardware. For this exercise we will connect a Static Electricity Detector to the RPi GPIO port and read the value of that sensor using Java code. The circuit we'll use is from William J. Beaty and is described at this Web link. See: Static Electricity Detector He calls it an "Electric Charge" detector, which is a bit misleading. A Field Effect Transistor is subject to nearby electro-magnetic fields, such as a static charge on a nearby object, not really an electric charge. So, this sensor will detect static electricity (or ghosts if you are into paranormal activity ). Take a look at the circuit and in the next blog posts we'll step through how to connect it to the GPIO port of your RPi and then how to write Java code to access this fun sensor. Hinkmond

  Read the article

• Modded Portal Gun Levitates a Companion Cube [Video]

  - by Jason Fitzpatrick

  This cleverly designed Portal gun prop levitates a model Companion Cube; the whole setup just begs to be paired with a Halloween costume. Courtesy of Caleb over at Hack A Day: I was out to lunch with a couple friends, brainstorming ideas for fun projects when one of them says “Wouldn’t it be cool if we could build a working gravity gun?”. We all immediately concurred that while it would in fact be cool, it is also a silly proposition. However, only a few seconds later, I realized we could do a display piece that emulated this concept very easily. Floating magnetic globes have been around for quite some time. I determined I would tear the guts out of a stock floating globe and mount it on a portal gun, since they’re easier to find than a gravity gun. I would also build a custom companion cube to be the correct size and weight necessary. Watch the video above and then check out the link below for more information on the build. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• Antenna Aligner part 2: Finding the right direction

  - by Chris George

  Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

  Read the article

• HCM: North America: Year End Knowledge Content References

  - by CaroleB

  As we all know, the next couple of months will be busy ones for the Payroll and IT department in relation to preparing for Year End,as a means of assisting you to find documented knowledge in reference to North American (NA) Year End, the following reference guide has been put together: General Knowledge: Doc ID 404478.1 Americas (US, CA, MX) HCM High Priority Alert Doc ID 1577601.1 North American Year End 2013 / 2014 Year Begin Patch Information and Useful Links. Monitor this note as it will be updated as new information becomes available NA Year End Processing: Document 255466.1 - End of Year Processing Using Oracle HRMS (US)  Document 260344.1 - End Of Year Processing Using Oracle HRMS (Canada) Document 395622.1 - End Of Year Processing Using Oracle HRMS (Mexican) Patching : Document 216109.1 - Oracle Human Resources (HRMS) Payroll North America Annual Patching Schedule Document 1160507.1 - Oracle E-Business Suite - Consolidated HRMS Mandatory Patch List Document 1144633.1 - US Year End Patch Flow Advisor: E-Business Suite (EBS) Human Capital Management (HCM) for US Legislation patching 2013 YE Phase I Readme's US Document 1584795.1 Release 11i   - 2013 US Payroll Year End Phase 1 Readme Document 1584796.1 Release 12.0 - 2013 US Payroll Year End Phase 1 Readme Document 1584797.1 Release 12.1 - 2013 US Payroll Year End Phase 1 Readme CA Document 1585365.1 2013 Canadian Payroll Year End Phase 1 Readme Release 11i Document 1585366.1 2013 Canadian Payroll Year End Phase 1 Readme Release 12.0 Document 1585367.1 2013 Canadian Payroll Year End Phase 1 Readme Release 12.1 Known Issues / How To: Document 1527958.2 - Information Center: Oracle HRMS (US) (All Application Versions) Look specifically at the US- Year End Tab for information on: Year End Pre-Processor 1099R Federal, State, and Local Magnetic Media W-2 Paper Reports W-2 PDF W-2 Register Additional Resources: Webcast: Document 1455851.1 - Advisor Webcasts for Oracle E-Business Suite- Human Capital Management (HCM) Document 1592483.1 - Webcast: EBS North American Payroll Year End Process Flow November 20, 2013 at 3:30 pm ET, 2:30 pm CT, 1:30 pm MT, 12:30 pm PT Communities: Payroll – EBS HCM - EBS Community E-Business Patching Community

  Read the article

• Antenna Aligner part 2: Finding the right direction

  - by Chris George

  Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

  Read the article

• Help deciding on language for a complex desktop - web application

  - by user967834

  I'm about to start working on a fairly complex project needing a desktop GUI as well as a web interface and I need to decide on a language(s) to use. This is from an electrical engineering/robotics background. These are the requirements: Program will have to read data from multiple sensors and inputs (motion sensor, temperature sensor, capacitive sensor, infrared, magnetic sensors, etc) through a port on a computer - so either through USB or ethernet. Program will have to be able to send control signals based on this input. Program will have to continuously monitor all input signals at all times - so realtime data. Program will require authentication. Program will need to be controllable from a web interface from anywhere via logging in to a website. Web interface will also need to have realtime feedback once authenticated. What language do you think would best accomplish this? I was thinking maybe saving everything into a database which can be accessed by both the desktop and web app? And would Python be able to do all of this? Or something like a remote desktop app? I know this is a complex project but let's assume I can learn any language. Has anyone done something like this and if so how did you accomplish it?

  Read the article

• Configuring an Engenius 3500

  - by dsiddens

  The title speaks to only half of the issue: the other half are the settings in Ubuntu and the sequences therein. The computer in this issue does receive internet with the external antenna jack at the back being fed with a simple magnetic base antenna designed for putting on the roof of an automobile. However, that signal is weak and the Engenius with an external antenna (Rootenna ~15db gain) and ehternet wire will supply a stronger, faster signal. I've set the Engenius to the desired source and entered the correct WEP password. The lights on the Engenius indicate that it's connected to the access point. At the Ubuntu side of this I've worked to no avail changing settings with "Edit Connections" to the point I'm Ask(ing)Ubuntu for help. I have and have RTFM for Engenius 3500 There is an embarrassing side note to this issue: At one time I had the Engenius working! It seems that I can't recall the settings and sequences I used way back when. And I may as well confess to not knowing the Command Line. I'm a GUI guy. Thank you for your time, Doug

  Read the article

• open current page in new window including query string

  - by Hatch

  First of all, I am a total dud at all things related to web developement, so please bear with me here. I suspect this question is laughable for the web guys, but unfortunately I can't figure this out. Here goes: I have an application, that does some processing, writes some result files and then displays the results in an embedded IE browser control. This is done by navigating the browser control to a local html file together with a query string containing the generated result files to display it all. The link target would look something like: c:\SomeFolder\results.htm?results=file%201.xml;file%202.xml;file%203.xml So far, everything's fine. However, in the html page is a href that is suppossed to open up the exact same just in a normal browser window. What I thought would work is: <a href="#" target="_blank">Show in browser</a> Since it is a link in an html page displayed in an IE control, the link will open up in IE no matter what the default browser might be. This works for IE7 and 8, but not for IE6. With IE6 the query string gets cut off and the browser opens file://c:/results/results.htm# without the query string. I am sure there must be a much better way to do this without the # and which would work in all IEs. How would the pros solve this?

  Read the article

• Is Matlab faster than Python?

  - by kame

  I want to compute magnetic fields of some conductors using the biot-savart-law and I want to use a 1000x1000x1000 matrix. Before I use Matlab, but now I want to use Python. Is Python slower than Matlab? How can I make Python faster? EDIT: Maybe the best way is to compute the big array with c/c++ and then transfering them to python. I want to visualise then with VPython. EDIT2: Could somebody give an advice for which is better in my case: C or C++?

  Read the article

< Previous Page | 1 2 3  | Next Page >