Search Results

Search found 104 results on 5 pages for 'msec'.

Page 2/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • How to make Firefox use TCP for DNS

    - by miniBill
    I want to use TCP for DNS, to bypass my ISP's slow and broken DNS servers. I'm not using (and don't want to use) a proxy. Note: I want to use DNS over TCP because if I use it over udp, no matter what server I set, I get answers from my ISP's DNS. Notice that I will fiercely downvote whoever suggests: programs to do TCP over DNS, the setting in about:config to make DNS go over the proxy too: I'm not using a proxy, use another DNS: I've already set up Google as my DNS, but I get intercepted. Example of what I mean by saying intercept: $ dig @8.8.8.8 thepiratebay.se ; <<>> DiG 9.8.1 <<>> @8.8.8.8 thepiratebay.se ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 24385 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;thepiratebay.se. IN A ;; ANSWER SECTION: thepiratebay.se. 28800 IN A 83.224.65.41 ;; Query time: 50 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Sun Sep 16 22:51:06 2012 ;; MSG SIZE rcvd: 49 $ dig +tcp @8.8.8.8 thepiratebay.se ; <<>> DiG 9.8.1 <<>> +tcp @8.8.8.8 thepiratebay.se ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 15131 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;thepiratebay.se. IN A ;; ANSWER SECTION: thepiratebay.se. 436 IN A 194.71.107.15 ;; Query time: 61 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Sun Sep 16 22:51:10 2012 ;; MSG SIZE rcvd: 49 If it matters, I'm using Firefox 14 on Gentoo Linux.

    Read the article

  • How to specify what network interface to use with TTCP or IPERF?

    - by Sammy
    The PC has two Gigabit Ethernet ports. They function as two separate network adapters. I'm trying to do a simple loopback test between the two. I've tried TTCP and IPERF. They're giving me hard time because I'm using the same physical PC. Using pcattcp... On the receiver end: C:\PCATTCP-0114>pcattcp -r PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Receive Test 0... TCP Receive Test Local Host : GIGA ************** Listening...: On TCPv4 0.0.0.0:5001 Accept : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 Buffer Size : 8192; Alignment: 16384/0 Receive Mode: Sinking (discarding) Data Statistics : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 16777216 bytes in 0.076 real seconds = 215578.95 KB/sec +++ numCalls: 2052; msec/call: 0.038; calls/sec: 27000.000 C:\PCATTCP-0114> On the transmitter end: C:\PCATTCP-0114>PCATTCP.exe -t 10.1.1.1 PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Transmit Test 0... TCP Transmit Test Transmit : TCPv4 0.0.0.0 -> 10.1.1.1:5001 Buffer Size : 8192; Alignment: 16384/0 TCP_NODELAY : DISABLED (0) Connect : Connected to 10.1.1.1:5001 Send Mode : Send Pattern; Number of Buffers: 2048 Statistics : TCPv4 0.0.0.0 -> 10.1.1.1:5001 16777216 bytes in 0.075 real seconds = 218453.33 KB/sec +++ numCalls: 2048; msec/call: 0.037; calls/sec: 27306.667 C:\PCATTCP-0114> It's responding alright. But why does it say 0.0.0.0? Is it passing through only one of the network adapters? I want 10.1.1.1 to be the server (receiver) and 10.1.1.2 to be the client (transmitter). These are the IP addresses assigned manually to each network adapter. How do I specify these addresses in TTCP? There is also the IPERF tool which has the -B option. Unfortunately I've been only able to use this option to bind the server to the 10.1.1.1 address. I was unable to bind the client to the 10.1.1.2 address. I might be doing it wrong. Can the -B option be used for both the server as well as the client side? What does the syntax look like for the client?

    Read the article

  • Setting up DNS server on VPS on the internet

    - by Nick Duffell
    I have followed multiple online tutorials on setting this up, it is BIND9 on a debian server. It is the only server I have, so it is acting as both ns1, ns1, and the server they domain name should point to itself. It all appears to be working and when I dig the domain name from the server itself I get (what seems to me) the correct output: ; << DiG 9.7.3 << theonetekkit.com.au ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 18593 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;theonetekkit.com.au. IN A ;; ANSWER SECTION: theonetekkit.com.au. 3000 IN A 103.4.17.189 ;; AUTHORITY SECTION: theonetekkit.com.au. 3000 IN NS ns1.theonetekkit.com.au. theonetekkit.com.au. 3000 IN NS ns2.theonetekkit.com.au. ;; ADDITIONAL SECTION: ns1.theonetekkit.com.au. 3000 IN A 103.4.17.189 ns2.theonetekkit.com.au. 3000 IN A 103.4.17.189 ;; Query time: 15 msec ;; SERVER: 103.4.17.189#53(103.4.17.189) ;; WHEN: Wed Nov 7 02:12:58 2012 ;; MSG SIZE rcvd: 121 When I dig it from another server / computer, however, I am getting a problem: ; << DiG 9.7.3 << theonetekkit.com.au ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: SERVFAIL, id: 56637 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;theonetekkit.com.au. IN A ;; Query time: 22 msec ;; SERVER: 103.4.16.166#53(103.4.16.166) ;; WHEN: Wed Nov 7 02:12:40 2012 ;; MSG SIZE rcvd: 37 I have given it more than enough time for the records to be refreshed since setting up the DNS server, so I don't know what would be causing this. Any ideas? Thanks

    Read the article

  • Weird DNS bug - external server resolves to internal IP

    - by emilecantin
    I have a server that is hosted by my university. I have root access, but no control over network setup, firewall, etc. This server's DNS resolves to an internal IP here on campus (10.x.x.x), and an external IP outside campus. I also have a few servers hosted at Amazon, and they mostly work well. However, one of them started to resolve the university server by its internal IP address. This causes problems, as 10.x.x.x on Amazon EC2 is someone else. I have connected to the Amazon server with SSH agent forwarding a few times in the past, to access a Git repository on the university server. Any idea what could cause this? EDIT: Here's my /etc/resolv.conf # Generated by dhcpcd for interface eth0 search ec2.internal nameserver 172.16.0.23 Here's the output of dig myserver.myuniversity.ca.: ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 34470 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 537586 IN A 10.43.x.x ;; Query time: 2 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:07:21 2012 ;; MSG SIZE rcvd: 60 Here's the expected output (on another Amazon server): ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 8045 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 601733 IN A x.x.239.1 ;; Query time: 1 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:09:36 2012 ;; MSG SIZE rcvd: 60

    Read the article

  • Why can host and nslookup resolve a name but dig cannot?

    - by musashiXXX
    Can anyone tell me why this is happening? I can resolve a hostname using host and/or nslookup but forward lookups do not work with dig; reverse lookups do: musashixxx@box:~$ host someserver someserver.somenet.internal has address 192.168.0.252 musashixxx@box:~$ host 192.168.0.252 252.0.168.192.in-addr.arpa domain name pointer someserver.somenet.internal. musashixxx@box:~$ nslookup someserver Server: 192.168.0.253 Address: 192.168.0.253#53 Name: someserver.somenet.internal Address: 192.168.0.252 musashixxx@box:~$ nslookup 192.168.0.252 Server: 192.168.0.253 Address: 192.168.0.253#53 252.0.168.192.in-addr.arpa name = someserver.somenet.internal. musashixxx@box:~$ dig someserver ; <<>> DiG 9.8.1-P1 <<>> someserver ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 55306 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;someserver. IN A ;; Query time: 0 msec ;; SERVER: 192.168.0.253#53(192.168.0.253) ;; WHEN: Wed Oct 3 15:47:38 2012 ;; MSG SIZE rcvd: 27 musashixxx@box:~$ dig -x 192.168.0.252 ; <<>> DiG 9.8.1-P1 <<>> -x 192.168.0.252 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 28126 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;252.0.168.192.in-addr.arpa. IN PTR ;; ANSWER SECTION: 252.0.168.192.in-addr.arpa. 3600 IN PTR someserver.somenet.internal. ;; Query time: 0 msec ;; SERVER: 192.168.0.253#53(192.168.0.253) ;; WHEN: Wed Oct 3 15:49:11 2012 ;; MSG SIZE rcvd: 86 Here's what my resolv.conf looks like: nameserver 192.168.0.253 search somenet.internal Is this behavior normal? Any thoughts?

    Read the article

  • dnsmasq local network works for some but hostnames are not resolving for others

    - by prggmr
    I have set up a local network and it seems that some of us can use it properly while others can't. The problem seems to be that the local hostnames I setup don't get resolved for everyone. To overview how the network is setup: I am running an Ubuntu 10.01 server using dnsmasq, this server is setup to act as our primary DNS server, configured via our router. dnsmasq is configured using the options of domain-needed bogus-priv I use the /etc/hosts file to determain the hostnames 192.168.1.10 ra.xsi 192.168.1.10 test.xsi From my machine: If I dig the hostnames they resolve properly ; <<>> DiG 9.4.3-P1 <<>> ra.xsi ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61671 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 9 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:28:34 2011 ;; MSG SIZE rcvd: 40 Ping also works: PING ra.xsi (192.168.1.10): 56 data bytes 64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=0.834 ms 64 bytes from 192.168.1.10: icmp_seq=1 ttl=64 time=0.699 ms ^C --- ra.xsi ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.699/0.766/0.834/0.068 ms And login via SSH works using the hostname. For those that cannot connect using hostnames, if I dig from their machine it appears the name is being resolved, but they cannot ping, SSH or http access the hostname. ; <<>> DiG 9.6.0-APPLE-P2 <<>> ra ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12554 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 8 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:05:50 2011 ;; MSG SIZE rcvd: 36 I've been banging my head at this and just can't seem to figure it out.

    Read the article

  • Google DNS Same Entry Different Results

    - by Henrik P. Hessel
    Why is this happening? The Rootserver returns a wrong entry I fixed containing 5269.XXX.com. instead of 5269 XXX.com. Macbook @ Home ; <<>> DiG 9.6.0-APPLE-P2 <<>> @8.8.8.8 srv _xmpp-server._tcp.XXX.com. ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18412 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;_xmpp-server._tcp.XXX.com. IN SRV ;; ANSWER SECTION: _xmpp-server._tcp.XXX.com. 64328 IN SRV 10 0 5269 XXX.com. ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Dec 28 03:16:45 2010 ;; MSG SIZE rcvd: 86 Rootserver ; <<>> DiG 9.6-ESV-R1 <<>> @8.8.8.8 srv _xmpp-server._tcp.XXX.com. ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27240 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;_xmpp-server._tcp.XXX.com. IN SRV ;; ANSWER SECTION: _xmpp-server._tcp.XXX.com. 52139 IN SRV 0 10 0 5269.XXX.com. ;; Query time: 7 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Dec 28 03:23:23 2010 ;; MSG SIZE rcvd: 91

    Read the article

  • BIND9 server not responding to external queries

    - by Twitchy
    I have set up a BIND server on my dedicated box which I want to host a nameserver for my domain on. When I use dig @202.169.196.59 nzserver.co.nz locally on the server I get the following response... ; <<>> DiG 9.8.1-P1 <<>> @202.169.196.59 nzserver.co.nz ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43773 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;nzserver.co.nz. IN A ;; ANSWER SECTION: nzserver.co.nz. 3600 IN A 202.169.196.59 ;; AUTHORITY SECTION: nzserver.co.nz. 3600 IN NS ns2.nzserver.co.nz. nzserver.co.nz. 3600 IN NS ns1.nzserver.co.nz. ;; ADDITIONAL SECTION: ns1.nzserver.co.nz. 3600 IN A 202.169.196.59 ns2.nzserver.co.nz. 3600 IN A 202.169.196.59 ;; Query time: 0 msec ;; SERVER: 202.169.196.59#53(202.169.196.59) ;; WHEN: Sat Oct 27 15:40:45 2012 ;; MSG SIZE rcvd: 116 Which is good, and is the output I want. But when simply using dig nzserver.co.nz I get... ; <<>> DiG 9.8.1-P1 <<>> nzserver.co.nz ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 16970 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;nzserver.co.nz. IN A ;; Query time: 308 msec ;; SERVER: 202.169.192.61#53(202.169.192.61) ;; WHEN: Sat Oct 27 17:09:12 2012 ;; MSG SIZE rcvd: 32 And if I use dig @202.169.196.59 nzserver.co.nz on another linux machine I get... ; <<>> DiG 9.7.3 <<>> @202.169.196.59 nzserver.co.nz ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached Am I doing something wrong here? Port 53 is definitely open. /etc/bind/named.conf.options options { directory "/var/cache/bind"; forwarders { 202.169.192.61; 202.169.206.10; }; listen-on { 202.169.196.59; }; }; /etc/bind/named.conf.local zone "nzserver.co.nz" { type master; file "/etc/bind/nzserver.co.nz.zone"; }; /etc/bind/nzserver.co.nz.zone ; BIND db file for nzserver.co.nz $ORIGIN nzserver.co.nz. @ IN SOA ns1.nzserver.co.nz. mr.steven.french.gmail.com. ( 2012102606 28800 7200 864000 3600 ) NS ns1.nzserver.co.nz. NS ns2.nzserver.co.nz. MX 10 mail.nzserver.co.nz. @ IN A 202.169.196.59 * IN A 202.169.196.59 ns1 IN A 202.169.196.59 ns2 IN A 202.169.196.59 www IN A 202.169.196.59 mail IN A 202.169.196.59

    Read the article

  • Opening programs very slow on ubuntu 12.10

    - by Mislav Blaževic
    When I open any program for first time after boot, it loads VERY slowly (Doesn't matter how long after boot). For example, terminal takes 2-3 seconds, skype and firefox often take much longer. If I close it and open again, it loads in reasonable time (<1 second). I got Intel Core i5-2500K CPU @ 3.30GHz, so it shouldn't be hardware issue... What is causing this? Disk benchmark: Average read time: 115.5 MB/s (100 samples) Average write time: 98.7 MB/s (100 samples) Average access time: 11.79 msec (1000 samples)

    Read the article

  • HttpWebRequest ReadWriteTimeout ignored in .NET; works in Mono

    - by jimvfr
    When writing data to a web server, my tests show HttpWebRequest.ReadWriteTimeout is ignored, contrary to the MSDN spec. For example if I set ReadWriteTimeout to 1 (=1 msec), call myRequestStream.Write() passing in a buffer that takes 10 seconds to transfer, it transfers successfully and never times out using .NET 3.5 SP1. The same test running on Mono 2.6 times out immediately as expected. What could be wrong?

    Read the article

  • Why can I resolve this hostname but not a cname to this hostname?

    - by Joe Hopfgartner
    if a run dig against a hostname, i get the according cname, however i get an NXDOMAIN error (non existent domain). if i run dig against the cname i got, I can resolve it to an IP address successfully. It is reproduceable. On the system I am currently on it is always the case, on other systems it sometimes works and sometimes not, and on other systems it seems to work all the time. If i run using a nameserver i specify (for example googles public nameserver) i can successfully resolve the hostname. i would just blame the local system, but it seems i am not having the only one problems the 2nd domain (unrestrict.me) is hosted on amazon route 53 nameservers. the 1st one on another dns server which has proofen to be fully functional and reliable over the years. i once switchted with the other domain to amazon dns as well, everything seemed to work, also various dns health check tests reported fine, however i recieved a lot of support tickets that dns resolution would not work. is amazon just "bad" or am i doing something wrong? i did not tamper with the domain in any way on the local system (in case of caching or making a custom dns view or whatever...) joe@joe:~$ dig scorpion.premiumize.me ; <<>> DiG 9.8.1-P1 <<>> scorpion.premiumize.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 10222 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;scorpion.premiumize.me. IN A ;; ANSWER SECTION: scorpion.premiumize.me. 180 IN CNAME alpha.nue.scorpion.unrestrict.me. ;; Query time: 28 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 18 10:28:39 2012 ;; MSG SIZE rcvd: 84 joe@joe:~$ dig alpha.nue.scorpion.unrestrict.me ; <<>> DiG 9.8.1-P1 <<>> alpha.nue.scorpion.unrestrict.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25381 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;alpha.nue.scorpion.unrestrict.me. IN A ;; ANSWER SECTION: alpha.nue.scorpion.unrestrict.me. 300 IN A 78.46.25.130 ;; Query time: 48 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 18 10:28:47 2012 ;; MSG SIZE rcvd: 66 joe@joe:~$

    Read the article

  • DNS lookups failing somewhere between firewall and router

    - by TessellatingHeckler
    we have a setup of ADSL line - Cisco 837 ADSL router - Zyxel ZyWall 35 firewall/NAT - Switch == Intel load balanced NICS in a server. It has been fine for years, suddenly DNS resolution stopped working on the server. No changes that I know of, so I can't work backwards from there. It was configured with the ISP's DNS servers, neither network device does DNS relaying. Wireshark shows the request go out but nothing comes back. The server networking stack seems OK though, because if we query an internal DNS server on a remote site, that works. I can logon to the Cisco, and DNS resolves OK from the command line. I can logon to the ZyWall, and DNS does not resolve from the command line. So the problem seems to be the firewall, patch cable or router, yes? On the router: interface Ethernet0 ip address aaa.bbb.ccc.ddd 255.255.255.ddd ip tcp adjust-mss 1450 hold-queue 100 out On the firewall: DNS server set to 8.8.8.8 (Google's), DNS traffic allowed LAN-WAN. What else should I look for? Update: Following This guide I've got traffic logging on the Cisco. I have also got access to a public DNS server which I can run tcpdump on to see things from the other side. And as per the below comments, I've tested with Dig and see that DNS over TCP works, and over UDP does not. Currently: DNS request from the server using TCP shows up in the firewall log, and in the Cisco log, and in tcpdump on the DNS server, the answer comes back, it works fine. DNS request from the server using UDP shows up in the firewall log, and in the Cisco log, does NOT show in tcpdump on the DNS server, times out. DNS request from the cisco (using UDP) does show up in tcpdump on the DNS server, answer received, works fine. Ping requests from the server and the cisco to the DNS server show up in tcpdump on the DNS server. DNS request from the server using UDP does show up on the firewall. Summary: TCP seems fine throughought. UDP works over the ADSL and to the Cisco, and it works from the server to the Cisco, but it doesn't cross the Cisco properly, it seems. I did see the Cisco showing as connected at 10Mb/full-duplex internally, and the firewall showing as 100Mb/full-duplex externally. I have forced the firewall to 10Mb and rebooted both devices. That seemed to help get UDP traffic (server-firewall-cisco) instead of (server-firewall), but did not fix it. Update: Sanitized Cisco config: version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname cisco ! logging queue-limit 100 enable secret 5 {password} enable password 7 {password} ! ip subnet-zero ip domain name example.org ip name-server {nameserver_IP} ! ! ip audit notify log ip audit po max-events 100 no ftp-server write-enable ! interface Ethernet0 ip address {Inside_public_IP} 255.255.255.248 ip tcp adjust-mss 1460 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface Dialer1 ip unnumbered Ethernet0 encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer persistent no cdp enable ppp chap hostname {ADSL_Username} ppp chap password 7 {ADSL_Password} ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server no ip http secure-server ! access-list 23 permit {IP} dialer-list 1 protocol ip permit no cdp run snmp-server enable traps tty ! {con, vty} end

    Read the article

  • Moved DNS and Email Hosting, Now Can't Send/Receive To/From Domains Hosted on Previous Host

    - by maxfinis
    Our company had 4 domains whose emails and DNS were hosted by one company, and then we moved the email and DNS hosting for 3 of the 4 domains to a new company. Now, the 3 domains that were moved can't send or receive emails to and from the one domain still left on the old server. All other email functions work fine for all 4 domains. There are no bouncebacks, error messages, or emails stuck in queue, and no evidence of these missing emails hitting the new servers. The new hosting company confirms that everything is fine on their end, and assures me that it's most likely an old zone file still remaining on the old nameserver, and so the emails sent from the old host is routed to what it believes is still the authoritative nameserver. Because the old zone file's MX records still contain the old resource, the requests never leave the old nameserver to go online to do a fresh search for the real (new) authoritative nameserver. The compounding problem is that the old company is rather inept and doesn't seem to have the technical expertise to identify the problem, much less fix it. (I know, I know.) Is the problem truly that this old zone file just needs to be deleted from the old company's nameserver? If so, what's the best way for me to describe this to them? If not, what do you think could be the issue? Any help is much appreciated. I'm not in IT, so all this is new to me. I know it seems weird for me (the client) to have to do this legwork, but I just want to get this resolved. Here's what I've done: Ran dig to verify that the old server's MX records still point to the old authoritative server, instead of going online to do a fresh search: ~$ dig @old.nameserver.com domainthatwasmoved.com mx ; << DiG 9.6.0-APPLE-P2 << @old.nameserver.com domainThatWasMoved.com mx ; (1 server found) ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 61227 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; QUESTION SECTION: ;domainthatwasmoved.com. IN MX ;; ANSWER SECTION: domainthatwasmoved.com. 3600 IN MX 10 mail.oldmailserver.com. ;; ADDITIONAL SECTION: mail.oldmailserver.com. 3600 IN A 65.198.191.5 ;; Query time: 29 msec ;; SERVER: 65.198.191.5#53(65.198.191.5) ;; WHEN: Sun Dec 26 16:59:22 2010 ;; MSG SIZE rcvd: 88 Ran dig to try to see where the new hosting company's servers look when emails are sent from the 3 domains that were moved, and got refused: ~$ dig @new.nameserver.net domainStillAtOldHost.com mx ; << DiG 9.6.0-APPLE-P2 << @new.nameserver.net domainStillAtOldHost.com mx ; (1 server found) ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: REFUSED, id: 31599 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;domainStillAtOldHost.com. IN MX ;; Query time: 31 msec ;; SERVER: 216.201.128.10#53(216.201.128.10) ;; WHEN: Sun Dec 26 17:00:14 2010 ;; MSG SIZE rcvd: 34

    Read the article

  • Configuring Wireless on Cisco 851W

    - by Aequitarum Custos
    Either a powersurge or something caused our router's configuration to get wiped, and our last backup was before the wireless network was setup. We have not been able to reconfigure the wireless since then, so was curious if anyone here would be able to determine what configuration is needed. We are using a Cisco 851W running 12.4(15)T9 We would like to use WPA encryption, and have it on the same network as the rest of the office network. Config file is below: User Access Verification Building configuration... Current configuration : 3857 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service dhcp ! hostname BOB ! boot-start-marker boot-end-marker ! enable secret 5 ********************* ! no aaa new-model ! ! dot11 syslog no ip source-route ! ! ip cef no ip bootp server ip domain name BOB.com ip name-server 61.11.1.1 ip name-server 61.11.1.2 ! ! ! username BOBB privilege 15 password 7 ************************* ! ! archive log config hidekeys ! ! ip tcp synwait-time 10 ! ! ! interface FastEthernet0 no cdp enable ! interface FastEthernet1 no cdp enable ! interface FastEthernet2 no cdp enable ! interface FastEthernet3 no cdp enable ! interface FastEthernet4 description WAN Connection$ETH-WAN$ ip address 61.11.1.14 255.255.254.0 ip nat outside ip virtual-reassembly duplex auto speed auto no cdp enable ! interface Dot11Radio0 no ip address shutdown ! encryption mode ciphers tkip speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root no cdp enable ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no cdp enable bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio0.20 ip access-group Guest-ACL in no cdp enable ! interface Vlan1 description Internal Network ip address 192.168.2.60 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 61.11.2.14 ! ip http server no ip http secure-server ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended Guest-ACL deny ip any 192.0.0.0 0.0.0.255 permit ip any any ! access-list 1 permit 192.0.0.0 0.0.0.255 access-list 100 remark SDM_ACL Category=2 access-list 100 permit ip 192.0.0.0 0.0.0.255 any no cdp run ! control-plane ! !

    Read the article

  • Why is the DNS on my Windows Server 2012 not authoritative according to dig?

    - by tetranz
    This is me trying to understand something rather than a real problem. I have a new Windows Server 2012 Essentials. That server provides, DNS, DHCP etc. Lets say my Windows domain is my-windows-domain and the server's host name is my-server. The domain's DNS zone is my-windows-domain.local. The server's IP address is 192.168.1.5. This is what I get if I go to a Linux machine on our LAN and do dig my-server.my-windows-domain @192.168.1.5 ; <<>> DiG 9.9.5-3-Ubuntu <<>> my-server.my-windows-domain.local @192.168.1.5 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 6003 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4000 ;; QUESTION SECTION: ;my-server.my-windows-domain.local. IN A ;; ANSWER SECTION: my-server.my-windows-domain.local. 3600 IN A 192.168.1.5 ;; Query time: 0 msec ;; SERVER: 192.168.1.5#53(192.168.1.5) ;; WHEN: Wed Jun 11 10:44:28 EDT 2014 ;; MSG SIZE rcvd: 73 I think that all looks okay except why is it AUTHORITY: 0 ? Shouldn't this be the authority for the my-windows-server.local domain? dig soa my-windows-domain.local comes back with: ; <<>> DiG 9.9.5-3-Ubuntu <<>> soa my-windows-domain.local ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 29822 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 2 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4000 ;; QUESTION SECTION: ;my-windows-domain.local. IN SOA ;; ANSWER SECTION: my-windows-domain.local. 3600 IN SOA my-server.my-windows-domain.local. hostmaster.my-windows-domain.local. 101 900 600 86400 3600 ;; ADDITIONAL SECTION: my-server.my-windows-domain.local. 3600 IN A 192.168.1.5 ;; Query time: 1 msec ;; SERVER: 192.168.1.5#53(192.168.1.5) ;; WHEN: Wed Jun 11 10:51:17 EDT 2014 ;; MSG SIZE rcvd: 120 I know about the recommendation to not use .local but there was no other option when I installed the server, just following the wizards.

    Read the article

  • Problem with Domain delegation...

    - by Lockhead
    Okey I have the subdomain news.247dist.com, if i dig any this domain i get: ; <<>> DiG 9.4.3-P3 <<>> news.247dist.com any ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 36179 ;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 2 ;; QUESTION SECTION: ;news.247dist.com. IN ANY ;; ANSWER SECTION: news.247dist.com. 259018 IN NS b.ns.broadmail.de. news.247dist.com. 259018 IN NS a.ns.broadmail.de. news.247dist.com. 2382 IN SOA a.ns.broadmail.de. hostmaster.news.247dist.com. 1274182332 16384 2048 1048576 2560 ;; ADDITIONAL SECTION: a.ns.broadmail.de. 718 IN A 193.169.180.254 b.ns.broadmail.de. 718 IN A 193.169.181.254 ;; Query time: 0 msec ;; SERVER: 80.67.16.6#53(80.67.16.6) ;; WHEN: Wed May 19 17:21:16 2010 ;; MSG SIZE rcvd: 160 The Problem is, if I dig any this subdomain and ask one of these NS Servers in the above dig i get: ; <<>> DiG 9.4.3-P3 <<>> any @a.ns.broadmail.de news.247dist.com ; (1 server found) ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 3887 ;; flags: qr aa rd; QUERY: 1, ANSWER: 6, AUTHORITY: 0, ADDITIONAL: 3 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;news.247dist.com. IN ANY ;; ANSWER SECTION: news.247dist.com. 2560 IN SOA a.ns.broadmail.de. hostmaster.news.247dist.com. 1274182332 16384 2048 1048576 2560 news.247dist.com. 900 IN NS a.ns.broadmail.de. news.247dist.com. 900 IN NS b.ns.broadmail.de. news.247dist.com. 900 IN MX 0 mail.srv2.de. news.247dist.com. 900 IN TXT "v=spf1 ip4:213.61.69.122/32 ip4:193.169.180.0/23 -all" news.247dist.com. 900 IN A 193.169.180.252 ;; ADDITIONAL SECTION: a.ns.broadmail.de. 900 IN A 193.169.180.254 b.ns.broadmail.de. 900 IN A 193.169.181.254 mail.srv2.de. 900 IN A 193.169.180.201 ;; Query time: 23 msec ;; SERVER: 193.169.180.254#53(193.169.180.254) ;; WHEN: Wed May 19 17:26:33 2010 ;; MSG SIZE rcvd: 284 So why I don't get the second result if i simple dig any news.247dist.com?

    Read the article

  • MX records not correctly updated by the Google DNS servers

    - by Mac_Cain13
    We are currently losing some e-mail and we discovered that this is caused by a wrong DNS setting. We used a CNAME for our MX record an thats not allowed. So about 2 weeks ago we changed it to an A-record to fix the problem. It seems all major DNS services (like OpenDNS and ISPs) have synced their records and are returning correct results on our DNS queries. But Googles DNS service (at 8.8.8.8) is still returning the CNAME values and we still some e-mails are not delivered correctly. Query on OpenDNS: ; <<>> DiG 9.7.3-P3 <<>> mx wrep.nl @208.67.222.222 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 51231 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;wrep.nl. IN MX ;; ANSWER SECTION: wrep.nl. 3595 IN MX 10 druif.wrep.nl. ;; Query time: 21 msec ;; SERVER: 208.67.222.222#53(208.67.222.222) ;; WHEN: Fri Nov 25 21:36:58 2011 ;; MSG SIZE rcvd: 47 Query on Google DNS: ; <<>> DiG 9.7.3-P3 <<>> mx wrep.nl @8.8.8.8 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12124 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;wrep.nl. IN MX ;; ANSWER SECTION: wrep.nl. 2372 IN CNAME druif.wrep.nl. ;; AUTHORITY SECTION: wrep.nl. 572 IN SOA ns0.freshdns.nl. hostmaster.twilightinc.nl. 2011112401 14400 3600 604800 3600 ;; Query time: 94 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Fri Nov 25 21:38:10 2011 ;; MSG SIZE rcvd: 117 So is there anyone who can explain why Google is responding with a different (incorrect) result two weeks after the last change? And how can we get Google to update their DNS records correctly? Any help is very appreciated. (Please note that other domains that are managed by the same DNS servers/tools are working fine.)

    Read the article

  • DNS with name.com and Amazon S3

    - by aledalgrande
    I have a website on a bucket in Amazon S3, and recently started to get emails from Google "Googlebot can't access your site". When I go to Webmaster Tools and I try to fetch in fact it doesn't work. Also people in locations different from mine sometimes reported they could not access the website. Now for curiosity I tried from my terminal: $ host xxx xxx is an alias for xxx.s3-website-us-west-1.amazonaws.com. xxx.s3-website-us-west-1.amazonaws.com is an alias for s3-website-us-west-1.amazonaws.com. s3-website-us-west-1.amazonaws.com has address yyy.yyy.yyy.yyy And when I try with dig: $ dig xxx ; <<>> DiG 9.8.3-P1 <<>> xxx ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17860 ;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;xxx. IN A ;; ANSWER SECTION: xxx. 300 IN CNAME xxx.s3-website-us-west-1.amazonaws.com. xxx.s3-website-us-west-1.amazonaws.com. 60 IN CNAME s3-website-us-west-1.amazonaws.com. s3-website-us-west-1.amazonaws.com. 60 IN A yyy ;; Query time: 1514 msec ;; SERVER: 75.75.75.75#53(75.75.75.75) ;; WHEN: Fri Aug 22 12:32:13 2014 ;; MSG SIZE rcvd: 127 It seems OK to me. Why would Google tell me there is a DNS error? UPDATE: Google also cannot fetch robots.txt, but I can fetch it from my browser. UPDATE 2: I have a forwarding on the root to the www.* hostname: $ dig thenifty.me ; <<>> DiG 9.8.3-P1 <<>> thenifty.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 49286 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;thenifty.me. IN A ;; AUTHORITY SECTION: thenifty.me. 300 IN SOA ns1hwy.name.com. support.name.com. 1 10800 3600 604800 300 ;; Query time: 148 msec ;; SERVER: 75.75.75.75#53(75.75.75.75) ;; WHEN: Fri Aug 22 13:32:56 2014 ;; MSG SIZE rcvd: 88

    Read the article

  • Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

    - by 2020mobile
    Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

    Read the article

  • Dig returns "status: REFUSED" for external queries?

    - by Mikey
    I can't seem to work out why my DNS isn't working properly, if I run dig from the nameserver it functions correctly: # dig ungl.org ; <<>> DiG 9.5.1-P2.1 <<>> ungl.org ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 24585 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 1 ;; QUESTION SECTION: ;ungl.org. IN A ;; ANSWER SECTION: ungl.org. 38400 IN A 188.165.34.72 ;; AUTHORITY SECTION: ungl.org. 38400 IN NS ns.kimsufi.com. ungl.org. 38400 IN NS r29901.ovh.net. ;; ADDITIONAL SECTION: ns.kimsufi.com. 85529 IN A 213.186.33.199 ;; Query time: 1 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Sat Mar 13 01:04:06 2010 ;; MSG SIZE rcvd: 114 but when I run it from another server in the same datacenter I receive: # dig @87.98.167.208 ungl.org ; <<>> DiG 9.5.1-P2.1 <<>> @87.98.167.208 ungl.org ; (1 server found) ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 18787 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;ungl.org. IN A ;; Query time: 1 msec ;; SERVER: 87.98.167.208#53(87.98.167.208) ;; WHEN: Sat Mar 13 01:01:35 2010 ;; MSG SIZE rcvd: 26 my zone file for this domain is $ttl 38400 ungl.org. IN SOA r29901.ovh.net. mikey.aol.com. ( 201003121 10800 3600 604800 38400 ) ungl.org. IN NS r29901.ovh.net. ungl.org. IN NS ns.kimsufi.com. ungl.org. IN A 188.165.34.72 localhost. IN A 127.0.0.1 www IN A 188.165.34.72 and the named.conf.options is default: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { ::1; }; listen-on { 127.0.0.1; }; allow-recursion { 127.0.0.1; }; }; named.conf.local: // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization // include "/etc/bind/zones.rfc1918"; zone "eugl.eu" { type master; file "/etc/bind/eugl.eu"; notify no; }; zone "ungl.org" { type master; file "/etc/bind/ungl.org"; notify no; }; The server is running Ubuntu 9.10 and Bind 9, if anyone can shed some light on this for me it'd make me very happy! thanks

    Read the article

  • CISCO 2911 Router configuration

    - by bala
    Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

    Read the article

  • How to find source of 301/302 redirect loop? Heroku GoDaddy Zerigo

    - by user179288
    this should be a relatively simple problem but I'm having trouble.I hope this is the right forum to post on as I've seen people get booted off stack-overflow for this sort of thing. I've setup a web app on heroku (cedar stack) at my-web-app.herokuapp.com and I'm trying to direct my-domain.com and www.my-domain.com to it. As per instructions on the heroku documentation, I've set my-domain.com to redirect (forwarding) to www.my-domain.com and then set a C-Name from www.my-domain.com to my-web-app.herokuapp.com. But the C-Name doesn't seem to be working right and is sending back to my-domain.com, causing a loop and I can't work out why. I first configured these setting at GoDaddy.com where I registered the domain but then tried to avoid the problem by using Heroku's Zerigo DNS add-on, setting the nameservers on GoDaddy to the ones given for Zerigo. However the problem remains. Here is the output from dig for my-domain.com ("drop-circles.com"): ; <<>> DiG 9.3.2 <<>> any drop-circles.com ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 671 ;; flags: qr rd ra; QUERY: 1, ANSWER: 8, AUTHORITY: 0, ADDITIONAL: 5 ;; QUESTION SECTION: ;drop-circles.com. IN ANY ;; ANSWER SECTION: drop-circles.com. 433 IN NS b.ns.zerigo.net. drop-circles.com. 433 IN NS d.ns.zerigo.net. drop-circles.com. 433 IN NS e.ns.zerigo.net. drop-circles.com. 433 IN NS a.ns.zerigo.net. drop-circles.com. 433 IN NS c.ns.zerigo.net. drop-circles.com. 433 IN SOA a.ns.zerigo.net. hostmaster.zerigo.com. 1372250760 10800 3600 604800 900 drop-circles.com. 433 IN A 64.27.57.29 drop-circles.com. 433 IN A 64.27.57.24 ;; ADDITIONAL SECTION: d.ns.zerigo.net. 68935 IN A 174.36.24.250 e.ns.zerigo.net. 69015 IN A 72.26.219.150 a.ns.zerigo.net. 72602 IN A 64.27.57.11 c.ns.zerigo.net. 69204 IN A 109.74.192.232 b.ns.zerigo.net. 70549 IN A 174.37.229.229 ;; Query time: 15 msec ;; SERVER: 194.168.4.100#53(194.168.4.100) ;; WHEN: Wed Jun 26 14:29:07 2013 ;; MSG SIZE rcvd: 293 Here is the output from dig for www.my-domain.com ("www.drop-circles.com"): ; <<>> DiG 9.3.2 <<>> any www.drop-circles.com ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 1608 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;www.drop-circles.com. IN ANY ;; ANSWER SECTION: www.drop-circles.com. 407 IN CNAME drop-circles-website.herokuapp.com. ;; Query time: 19 msec ;; SERVER: 194.168.4.100#53(194.168.4.100) ;; WHEN: Wed Jun 26 14:29:15 2013 ;; MSG SIZE rcvd: 83 And from Fiddler if I use the inspector when I try either address I get a series of requests, with the my-domain.com ("drop-circles.com") looking like this: Request: GET http://drop-circles.com/ HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-gb User-Agent: Opera/9.80 (Windows NT 5.1; U; Edition IBIS; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: drop-circles.com Response: HTTP/1.1 302 Found Server: nginx/0.8.54 Date: Wed, 26 Jun 2013 13:26:55 GMT Content-Type: text/html;charset=utf-8 Connection: keep-alive Status: 302 Found Location: http://www.drop-circles.com/ Content-Length: 113 <html><body>Redirecting to <a href="http://www.drop-circles.com/">http://www.drop-circles.com/</a></body></html> And the www.my-domain.com ("www.drop-circles.com") looking like this: Request: GET http://www.drop-circles.com/ HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-gb User-Agent: Opera/9.80 (Windows NT 5.1; U; Edition IBIS; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.drop-circles.com Response: HTTP/1.1 301 Moved Permanently Content-Type: text/html Date: Wed, 26 Jun 2013 13:26:56 GMT Location: http://drop-circles.com/ Vary: Accept X-Powered-By: Express Content-Length: 104 Connection: keep-alive <p>Moved Permanently. Redirecting to <a href="http://drop-circles.com/">http://drop-circles.com/</a></p> Any and all help would be greatly appreciated. If it is not at all obvious from these readouts what it might be could someone at least tell me which company GoDaddy, Zerigo or Heroku should I go to for support since I don't really know enough to be able to say where the problem lies. Thank you.

    Read the article

  • Cisco: unable to negotiate IP using IPCP with Windows server

    - by lnk
    I am connecting to Windows server using PPP (for vpn), I establish connection but server does not respond me for my address requests: *Mar 23 00:40:06.055: Vi1 MS-CHAP-V2: I CHALLENGE id 0 len 25 from "MSDC" *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using hostname from interface CHAP *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using password from interface CHAP *Mar 23 00:40:06.067: Vi1 MS-CHAP-V2: O RESPONSE id 0 len 69 from "XXX" *Mar 23 00:40:06.087: Vi1 PPP: I pkt type 0xC223, datagramsize 50 link[ppp] *Mar 23 00:40:06.087: Vi1 MS-CHAP-V2: I SUCCESS id 0 len 46 msg is "S=XXX" *Mar 23 00:40:06.087: Vi1 MS CHAP V2 No Password found for : XXX *Mar 23 00:40:06.091: Vi1 MS CHAP V2 Check AuthenticatorResponse Success for : XXX *Mar 23 00:40:06.091: Vi1 IPCP: O CONFREQ [Closed] id 1 len 20 *Mar 23 00:40:06.091: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:06.091: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up *Mar 23 00:40:07.091: Vi1 LCP: O ECHOREQ [Open] id 1 len 12 magic 0x194CAFCF *Mar 23 00:40:07.103: Vi1 LCP-FS: I ECHOREP [Open] id 1 len 12 magic 0x361B62E5 *Mar 23 00:40:07.103: Vi1 LCP-FS: Received id 1, sent id 1, line up *Mar 23 00:40:08.083: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:08.083: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 20 *Mar 23 00:40:08.083: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:08.083: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:10.099: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:10.099: Vi1 IPCP: O CONFREQ [REQsent] id 3 len 20 *Mar 23 00:40:10.099: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:10.099: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.115: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:12.115: Vi1 IPCP: O CONFREQ [REQsent] id 4 len 20 *Mar 23 00:40:12.115: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:12.115: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.211: Vi1 LCP: O ECHOREQ [Open] id 2 len 12 magic 0x194CAFCF *Mar 23 00:40:12.219: Vi1 LCP-FS: I ECHOREP [Open] id 2 len 12 magic 0x361B62E5 *Mar 23 00:40:12.219: Vi1 LCP-FS: Received id 2, sent id 2, line up *Mar 23 00:40:14.131: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:14.131: Vi1 IPCP: O CONFREQ [REQsent] id 5 len 20 *Mar 23 00:40:14.131: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:14.131: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:16.147: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:16.147: Vi1 IPCP: O CONFREQ [REQsent] id 6 len 20 *Mar 23 00:40:16.147: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:16.147: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:17.331: Vi1 LCP: O ECHOREQ [Open] id 3 len 12 magic 0x194CAFCF *Mar 23 00:40:17.343: Vi1 LCP-FS: I ECHOREP [Open] id 3 len 12 magic 0x361B62E5 *Mar 23 00:40:17.343: Vi1 LCP-FS: Received id 3, sent id 3, line up You see: My router asks for address, but only keepalives are on line. But the same server works with windows client!! ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service internal ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ! ! ip cef vpdn enable ! vpdn-group pptp request-dialin protocol pptp pool-member 1 initiate-to ip XXXX ! ! ! ! ! ! ! bridge irb ! ! interface ATM0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Dot11Radio0 no ip address shutdown speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Vlan1 no ip address bridge-group 1 ! interface Dialer0 ip address negotiated encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer string XXX dialer persistent dialer vpdn dialer-group 1 keepalive 5 3 no cdp enable ppp authentication ms-chap-v2 optional ppp eap refuse ppp chap hostname XXX ppp chap password 0 XXX ppp ipcp mask request ppp ipcp ignore-map ppp ipcp address accept ! interface BVI1 mac-address XXX.XXX.XXX ip address dhcp ! ip classless ip route 172.0.0.0 255.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! dialer-list 1 protocol ip permit ! control-plane ! bridge 1 protocol vlan-bridge bridge 1 route ip ! line con 0 no modem enable line aux 0 line vty 0 4 login ! scheduler max-task-time 5000 end

    Read the article

  • How much does the geographical location of DNS servers matter?

    - by GreatFire
    We have started to run our own DNS servers located in Asia since that's where our main audience is. However, it seems that some users in the US are having difficulties accessing our website sometimes. I've noticed myself that DNS lookups of our domain from the US are relatively slow (500 msec+). Maybe the problems some users are having are due to other DNS configuration errors, but in general, how much of an issue is the geographical location of DNS servers? Should we have an additional server in the US?

    Read the article

  • Database implementation question?

    - by gundam
    consider a disk with a sector size of 512 bytes, 2000 tracks/surface, 50 sectors/track, 5 doubled sided platters, average seek time is 10 msec. Assume a block size of 1024-byte is selected. Assume a file that contains 100,000 records of 100-byte each is to be stored on the disk, and NONE of the reocd can be spanned 2 blocks. How many blocks are needed to store the entire file?? If the file is arranged sequentially on disk, how many surfaces are required?? Now, i have calculated that 10,000 blocks are needed to store 100,000 records. But i am not sure how to find out the answer of the surfaces required. I only calculated the capacity of track is 25KB and capacity of surface is 50,000 KB But I don't know how to calculate the number of surfaces... Could anyone help me how to get the answer? Thanks a lot!!

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >