Search Results

Search found 50273 results on 2011 pages for 'run length'.

Page 2/2011 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• TCP RST right after FIN/ACK

  - by Nitzan Shaked

  I am having the weirdest issue: I have a web server which sometimes, only on very specific requests, will send a RST to the client after having sent the FIN datagram. First, a description of the setup: The server runs on an Ubuntu 12.04.1 LTS, which itself is a VM guest inside a Win7 x64 host, in bridged mode. ufw is disabled on the host The client runs on a iOS simulator, which runs on OS X Mountain Lion, which is a VM guest (hackintosh) inside a Win7 x64 host, in bridged mode. Both client and server are on the same LAN, one is connected to the home router via an Ethernet cable, and then other thru WiFi. I happened to glimpse over the server's http logs and found that the client sometimes issuing multiple subsequent identical requests. Further investigation led me to discover that this happens when the server sends a RST, and that the client is simply re-trying. I am attaching several tcpdump's: Good1 is the server-side tcpdump of a good session ("good" meaning no RST was generated). Good3 is another sever-side tcpdump of a good session. (The difference between Good1 and Good3 is the order in which ACK's were sent from the server to the client, ACK'ing the client's request. The client's request arives in 2 segements (specifically: one for the http headers, and another for a body containing an empty json object, "{}"). In Good1, the server ACK's both request segments, using 2 ACK segments, after the second request has arrived. In Good3, the server ACK's each request segment with an ACK segment as soon as the request segment arrives. Not that it should make a difference.) Bad1 is a dump, both client- and server-side, of a bad session. Bad2 is another bad session, this time server-side only. Note that in all "bad" sessions, the server ACK's each request segments immediately after having received it. I've looked at a few other bad sessions, and the situation is the same in all of them. But this is also the behavior in "Good3", so I don't see how that observation helps me, of for that matter why it should matter. I can't find any difference between good and bad sessions, or at least one that I think should matter. My question is: why are those RST's being generated? Or at least: how do I go about debugging this, or providing more info here that'll help? Edit 2 new facts that I have learned: Section 4.2.2.13 of the RFC (1122) (and Wikipedia, in the article "TCP", under "Connection Termination") says that a TCP application on one host may close the connection before it has read all of the data in its socket buffer, and in such a case the TCP on the host will sent a RST to the other side, to let it know that not all the data it has sent has been read. I'm not sure I completely understand this, since closing my side of the connection still allows me to read, no? It also means that I can't write any more. I am not sure this is relevant, though, since I see a RST after FIN. There are multiple complaints of this happening with wsgiref (Python's dev-mode HTTP server), which is exactly what I'm using. I'll keep updating as I find out more. Thanks! ~~~~~~~~~~~~~~~~~~~~ Good1 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:02.308319 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [S], seq 94268074, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943308864 ecr 0,sackOK,eol], length 0 13:28:02.308336 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [S.], seq 1726304574, ack 94268075, win 14480, options [mss 1460,sackOK,TS val 326480982 ecr 943308864,nop,wscale 3], length 0 13:28:02.309750 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 0 13:28:02.310744 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 350 13:28:02.310766 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943308865 ecr 326480982], length 2 13:28:02.310841 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480983 ecr 943308865], length 0 13:28:02.310918 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480983 ecr 943308865], length 0 13:28:02.315931 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480984 ecr 943308865], length 17 13:28:02.316107 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480984 ecr 943308865], length 666 13:28:02.317651 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318288 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318640 IP 192.168.1.51.51479 > 192.168.1.132.5000: Flags [F.], seq 353, ack 685, win 8192, options [nop,nop,TS val 943308872 ecr 326480984], length 0 13:28:02.318651 IP 192.168.1.132.5000 > 192.168.1.51.51479: Flags [.], ack 354, win 1944, options [nop,nop,TS val 326480985 ecr 943308872], length 0 ~~~~~~~~~~~~~~~~~~~~ Good3 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:03.311143 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [S], seq 1982901126, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943309853 ecr 0,sackOK,eol], length 0 13:28:03.311155 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [S.], seq 2245063571, ack 1982901127, win 14480, options [mss 1460,sackOK,TS val 326481233 ecr 943309853,nop,wscale 3], length 0 13:28:03.312671 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943309854 ecr 326481233], length 0 13:28:03.313330 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943309855 ecr 326481233], length 350 13:28:03.313337 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326481234 ecr 943309855], length 0 13:28:03.313342 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943309855 ecr 326481233], length 2 13:28:03.313346 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326481234 ecr 943309855], length 0 13:28:03.327942 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326481237 ecr 943309855], length 17 13:28:03.328253 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326481237 ecr 943309855], length 666 13:28:03.329076 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943309868 ecr 326481237], length 0 13:28:03.329688 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943309868 ecr 326481237], length 0 13:28:03.330361 IP 192.168.1.51.51486 > 192.168.1.132.5000: Flags [F.], seq 353, ack 685, win 8192, options [nop,nop,TS val 943309869 ecr 326481237], length 0 13:28:03.330370 IP 192.168.1.132.5000 > 192.168.1.51.51486: Flags [.], ack 354, win 1944, options [nop,nop,TS val 326481238 ecr 943309869], length 0 ~~~~~~~~~~~~~~~~~~~~ Bad1 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:01.311876 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [S], seq 920400580, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307883 ecr 0,sackOK,eol], length 0 13:28:01.311896 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [S.], seq 3103085782, ack 920400581, win 14480, options [mss 1460,sackOK,TS val 326480733 ecr 943307883,nop,wscale 3], length 0 13:28:01.313509 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307884 ecr 326480733], length 0 13:28:01.315614 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 350 13:28:01.315727 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:01.316229 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 2 13:28:01.316242 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:01.321019 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480735 ecr 943307886], length 17 13:28:01.321294 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 666 13:28:01.321386 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 0 13:28:01.322727 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307891 ecr 326480735], length 0 13:28:01.322733 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103085800, win 0, length 0 13:28:01.323221 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307892 ecr 326480736], length 0 13:28:01.323231 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103086467, win 0, length 0 ~~~~~~~~~~~~~~~~~~~~ Bad1 -- Client Side ~~~~~~~~~~~~~~~~~~~~ 13:28:11.374654 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [S], seq 920400580, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307883 ecr 0,sackOK,eol], length 0 13:28:11.375764 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [S.], seq 3103085782, ack 920400581, win 14480, options [mss 1460,sackOK,TS val 326480733 ecr 943307883,nop,wscale 3], length 0 13:28:11.376352 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307884 ecr 326480733], length 0 13:28:11.378252 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 350 13:28:11.379027 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307886 ecr 326480733], length 2 13:28:11.379732 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:11.380592 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480734 ecr 943307886], length 0 13:28:11.384968 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480735 ecr 943307886], length 17 13:28:11.385044 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307891 ecr 326480735], length 0 13:28:11.385586 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 666 13:28:11.385743 IP 192.168.1.51.51472 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307892 ecr 326480736], length 0 13:28:11.385966 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307886], length 0 13:28:11.387343 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103085800, win 0, length 0 13:28:11.387344 IP 192.168.1.132.5000 > 192.168.1.51.51472: Flags [R], seq 3103086467, win 0, length 0 ~~~~~~~~~~~~~~~~~~~~ Bad2 -- Server Side ~~~~~~~~~~~~~~~~~~~~ 13:28:01.319185 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [S], seq 1631526992, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 943307889 ecr 0,sackOK,eol], length 0 13:28:01.319197 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [S.], seq 2524685719, ack 1631526993, win 14480, options [mss 1460,sackOK,TS val 326480735 ecr 943307889,nop,wscale 3], length 0 13:28:01.320692 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 0 13:28:01.322219 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [P.], seq 1:351, ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 350 13:28:01.322336 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [.], ack 351, win 1944, options [nop,nop,TS val 326480736 ecr 943307890], length 0 13:28:01.322689 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [P.], seq 351:353, ack 1, win 8235, options [nop,nop,TS val 943307890 ecr 326480735], length 2 13:28:01.322700 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [.], ack 353, win 1944, options [nop,nop,TS val 326480736 ecr 943307890], length 0 13:28:01.326307 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [P.], seq 1:18, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 17 13:28:01.326614 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [FP.], seq 18:684, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 666 13:28:01.326710 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R.], seq 685, ack 353, win 1944, options [nop,nop,TS val 326480737 ecr 943307890], length 0 13:28:01.328499 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 18, win 8234, options [nop,nop,TS val 943307896 ecr 326480737], length 0 13:28:01.328509 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R], seq 2524685737, win 0, length 0 13:28:01.328514 IP 192.168.1.51.51473 > 192.168.1.132.5000: Flags [.], ack 685, win 8192, options [nop,nop,TS val 943307896 ecr 326480737], length 0 13:28:01.328517 IP 192.168.1.132.5000 > 192.168.1.51.51473: Flags [R], seq 2524686404, win 0, length 0

  Read the article

• run as dialog always pops up

  - by user12006

  I recently got some malware on a machine that I don't use for much (partly intentional). I've cleaned it, but now everytime I open any .exe the 'Run As' dialog pops up asking me which user I want to use to run the program. What causes this, and what's the fix for it? edit My process to remove the malware was as such: Disconnected from the network Deleted DisableTaskMgr reg key Inspected with Process Explorer and Task Manager and noticed that all applications were being run within another executable located in Documents and Settings...\Temp\Some.exe The system tray application was also in Documents and Settings...\Temp\SomeOther.exe I suspected that a service was in place as the system tray application would restart if it was killed, but couldn't find any service that I didn't recognize. Removed permissions from Some.exe and SomeOther.exe (on those files only) Restarted and deleted Some.exe and SomeOther.exe Deleted startup entries that were created Ran AVG Free and Windows Defender to remove anything else (they would be killed immediately before the two .exe's were removed) Cleaned registry via CCleaner note that system restores would finish saying something to the effect of 'couldn't restore system: there were no changes made'. I attempted to restore to a week ago, and I only got the malware yesterday.

  Read the article

• Scripting with the Sun ZFS Storage 7000 Appliance

  - by Geoff Ongley

  The Sun ZFS Storage 7000 appliance has a user friendly and easy to understand graphical web based interface we call the "BUI" or "Browser User Interface".This interface is very useful for many tasks, but in some cases a script (or workflow) may be more appropriate, such as:Repetitive tasksTasks which work on (or obtain information about) a large number of shares or usersTasks which are triggered by an alert threshold (workflows)Tasks where you want a only very basic input, but a consistent output (workflows)The appliance scripting language is based on ECMAscript 3 (close to javascript). I'm not going to cover ECMAscript 3 in great depth (I'm far from an expert here), but I would like to show you some neat things you can do with the appliance, to get you started based on what I have found from my own playing around.I'm making the assumption you have some sort of programming background, and understand variables, arrays, functions to some extent - but of course if something is not clear, please let me know so I can fix it up or clarify it.Variable Declarations and ArraysVariablesECMAScript is a dynamically and weakly typed language. If you don't know what that means, google is your friend - but at a high level it means we can just declare variables with no specific type and on the fly.For example, I can declare a variable and use it straight away in the middle of my code, for example:projects=list();Which makes projects an array of values that are returned from the list(); function (which is usable in most contexts). With this kind of variable, I can do things like:projects.length (this property on array tells you how many objects are in it, good for for loops etc). Alternatively, I could say:projects=3;and now projects is just a simple number.Should we declare variables like this so loosely? In my opinion, the answer is no - I feel it is a better practice to declare variables you are going to use, before you use them - and given them an initial value. You can do so as follows:var myVariable=0;To demonstrate the ability to just randomly assign and change the type of variables, you can create a simple script at the cli as follows (bold for input):fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("Number of projects is: %d\n",projects.length);("." to run)> projects=152;("." to run)> printf("Value of the projects variable as an integer is now: %d\n",projects);("." to run)> .Number of projects is: 7Value of the projects variable as an integer is now: 152You can also confirm this behaviour by checking the typeof variable we are dealing with:fishy10:> script("." to run)> run("cd /");("." to run)> run ("shares");("." to run)> var projects;("." to run)> projects=list();("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> projects=152;("." to run)> printf("var projects is of type %s\n",typeof(projects));("." to run)> .var projects is of type objectvar projects is of type numberArraysSo you likely noticed that we have already touched on arrays, as the list(); (in the shares context) stored an array into the 'projects' variable.But what if you want to declare your own array? Easy! This is very similar to Java and other languages, we just instantiate a brand new "Array" object using the keyword new:var myArray = new Array();will create an array called "myArray".A quick example:fishy10:> script("." to run)> testArray = new Array();("." to run)> testArray[0]="This";("." to run)> testArray[1]="is";("." to run)> testArray[2]="just";("." to run)> testArray[3]="a";("." to run)> testArray[4]="test";("." to run)> for (i=0; i < testArray.length; i++)("." to run)> {("." to run)>    printf("Array element %d is %s\n",i,testArray[i]);("." to run)> }("." to run)> .Array element 0 is ThisArray element 1 is isArray element 2 is justArray element 3 is aArray element 4 is testWorking With LoopsFor LoopFor loops are very similar to those you will see in C, java and several other languages. One of the key differences here is, as you were made aware earlier, we can be a bit more sloppy with our variable declarations.The general way you would likely use a for loop is as follows:for (variable; test-case; modifier for variable){}For example, you may wish to declare a variable i as 0; and a MAX_ITERATIONS variable to determine how many times this loop should repeat:var i=0;var MAX_ITERATIONS=10;And then, use this variable to be tested against some case existing (has i reached MAX_ITERATIONS? - if not, increment i using i++);for (i=0; i < MAX_ITERATIONS; i++){ // some work to do}So lets run something like this on the appliance:fishy10:> script("." to run)> var i=0;("." to run)> var MAX_ITERATIONS=10;("." to run)> for (i=0; i < MAX_ITERATIONS; i++)("." to run)> {("." to run)>    printf("The number is %d\n",i);("." to run)> }("." to run)> .The number is 0The number is 1The number is 2The number is 3The number is 4The number is 5The number is 6The number is 7The number is 8The number is 9While LoopWhile loops again are very similar to other languages, we loop "while" a condition is met. For example:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n",counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Counter is 10Loop has ended and Counter is 11So what do we notice here? Something has actually gone wrong - counter will technically be 11 once the loop completes... Why is this?Well, if we have a loop like this, where the 'while' condition that will end the loop may be set based on some other condition(s) existing (such as the counter has reached 10) - we must ensure that we  terminate this iteration of the loop when the condition is met - otherwise the rest of the code will be followed which may not be desirable. In other words, like in other languages, we will only ever check the loop condition once we are ready to perform the next iteration, so any other code after we set "isTen" to be true, will still be executed as we can see it was above.We can avoid this by adding a break into our loop once we know we have set the condition - this will stop the rest of the logic being processed in this iteration (and as such, counter will not be incremented). So lets try that again:fishy10:> script("." to run)> var isTen=false;("." to run)> var counter=0;("." to run)> while(isTen==false)("." to run)> {("." to run)>    if (counter==10) ("." to run)>    { ("." to run)>            isTen=true;   ("." to run)>            break;("." to run)>    } ("." to run)>    printf("Counter is %d\n",counter);("." to run)>    counter++;    ("." to run)> }("." to run)> printf("Loop has ended and Counter is %d\n", counter);("." to run)> .Counter is 0Counter is 1Counter is 2Counter is 3Counter is 4Counter is 5Counter is 6Counter is 7Counter is 8Counter is 9Loop has ended and Counter is 10Much better!Methods to Obtain and Manipulate DataGet MethodThe get method allows you to get simple properties from an object, for example a quota from a user. The syntax is fairly simple:var myVariable=get('property');An example of where you may wish to use this, is when you are getting a bunch of information about a user (such as quota information when in a shares context):var users=list();for(k=0; k < users.length; k++){     user=users[k];     run('select ' + user);     var username=get('name');     var usage=get('usage');     var quota=get('quota');...Which you can then use to your advantage - to print or manipulate infomation (you could change a user's information with a set method, based on the information returned from the get method). The set method is explained next.Set MethodThe set method can be used in a simple manner, similar to get. The syntax for set is:set('property','value'); // where value is a string, if it was a number, you don't need quotesFor example, we could set the quota on a share as follows (first observing the initial value):fishy10:shares default/test-geoff> script("." to run)> var currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> set('quota','30G');("." to run)> run('commit');("." to run)> currentQuota=get('quota');("." to run)> printf("Current Quota is: %s\n",currentQuota);("." to run)> .Current Quota is: 0Current Quota is: 32212254720This shows us using both the get and set methods as can be used in scripts, of course when only setting an individual share, the above is overkill - it would be much easier to set it manually at the cli using 'set quota=3G' and then 'commit'.List MethodThe list method can be very powerful, especially in more complex scripts which iterate over large amounts of data and manipulate it if so desired. The general way you will use list is as follows:var myVar=list();Which will make "myVar" an array, containing all the objects in the relevant context (this could be a list of users, shares, projects, etc). You can then gather or manipulate data very easily.We could list all the shares and mountpoints in a given project for example:fishy10:shares another-project> script("." to run)> var shares=list();("." to run)> for (i=0; i < shares.length; i++)("." to run)> {("." to run)>    run('select ' + shares[i]);("." to run)>    var mountpoint=get('mountpoint');("." to run)>    printf("Share %s discovered, has mountpoint %s\n",shares[i],mountpoint);("." to run)>    run('done');("." to run)> }("." to run)> .Share and-another discovered, has mountpoint /export/another-project/and-anotherShare another-share discovered, has mountpoint /export/another-project/another-shareShare bob discovered, has mountpoint /export/another-projectShare more-shares-for-all discovered, has mountpoint /export/another-project/more-shares-for-allShare yep discovered, has mountpoint /export/another-project/yepWriting More Complex and Re-Usable CodeFunctionsThe best way to be able to write more complex code is to use functions to split up repeatable or reusable sections of your code. This also makes your more complex code easier to read and understand for other programmers.We write functions as follows:function functionName(variable1,variable2,...,variableN){}For example, we could have a function that takes a project name as input, and lists shares for that project (assuming we're already in the 'project' context - context is important!):function getShares(proj){        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                printf("Discovered share: %s\n",shares[i]);        }        run('done'); // exit selected project}Commenting your CodeLike any other language, a large part of making it readable and understandable is to comment it. You can use the same comment style as in C and Java amongst other languages.In other words, sngle line comments use://at the beginning of the comment.Multi line comments use:/*at the beginning, and:*/ at the end.For example, here we will use both:fishy10:> script("." to run)> // This is a test comment("." to run)> printf("doing some work...\n");("." to run)> /* This is a multi-line("." to run)> comment which I will span across("." to run)> three lines in total */("." to run)> printf("doing some more work...\n");("." to run)> .doing some work...doing some more work...Your comments do not have to be on their own, they can begin (particularly with single line comments this is handy) at the end of a statement, for examplevar projects=list(); // The variable projects is an array containing all projects on the system.Try and Catch StatementsYou may be used to using try and catch statements in other languages, and they can (and should) be utilised in your code to catch expected or unexpected error conditions, that you do NOT wish to stop your code from executing (if you do not catch these errors, your script will exit!):try{  // do some work}catch(err) // Catch any error that could occur{ // do something here under the error condition}For example, you may wish to only execute some code if a context can be reached. If you can't perform certain actions under certain circumstances, that may be perfectly acceptable.For example if you want to test a condition that only makes sense when looking at a SMB/NFS share, but does not make sense when you hit an iscsi or FC LUN, you don't want to stop all processing of other shares you may not have covered yet.For example we may wish to obtain quota information on all shares for all users on a share (but this makes no sense for a LUN):function getShareQuota(shar) // Get quota for each user of this share{        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","----");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}Running Scripts Remotely over SSHAs you have likely noticed, writing and running scripts for all but the simplest jobs directly on the appliance is not going to be a lot of fun.There's a couple of choices on what you can do here:Create scripts on a remote system and run them over sshCreate scripts, wrapping them in workflow code, so they are stored on the appliance and can be triggered under certain circumstances (like a threshold being reached)We'll cover the first one here, and then cover workflows later on (as these are for the most part just scripts with some wrapper information around them).Creating a SSH Public/Private SSH Key PairLog on to your handy Solaris box (You wouldn't be using any other OS, right? :P) and use ssh-keygen to create a pair of ssh keys. I'm storing this separate to my normal key:[geoff@lightning ~] ssh-keygen -t rsa -b 1024Generating public/private rsa key pair.Enter file in which to save the key (/export/home/geoff/.ssh/id_rsa): /export/home/geoff/.ssh/nas_key_rsaEnter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /export/home/geoff/.ssh/nas_key_rsa.Your public key has been saved in /export/home/geoff/.ssh/nas_key_rsa.pub.The key fingerprint is:7f:3d:53:f0:2a:5e:8b:2d:94:2a:55:77:66:5c:9b:14 geoff@lightningInstalling the Public Key on the ApplianceOn your Solaris host, observe the public key:[geoff@lightning ~] cat .ssh/nas_key_rsa.pub ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc= geoff@lightningNow, copy and paste everything after "ssh-rsa" and before "user@hostname" - in this case, geoff@lightning. That is, this bit:AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc=Logon to your appliance and get into the preferences -> keys area for this user (root):[geoff@lightning ~] ssh [email protected]: Last login: Mon Dec  6 17:13:28 2010 from 192.168.0.2fishy10:> configuration usersfishy10:configuration users> select rootfishy10:configuration users root> preferences fishy10:configuration users root preferences> keysOR do it all in one hit:fishy10:> configuration users select root preferences keysNow, we create a new public key that will be accepted for this user and set the type to RSA:fishy10:configuration users root preferences keys> createfishy10:configuration users root preferences key (uncommitted)> set type=RSASet the key itself using the string copied previously (between ssh-rsa and user@host), and set the key ensuring you put double quotes around it (eg. set key="<key>"):fishy10:configuration users root preferences key (uncommitted)> set key="AAAAB3NzaC1yc2EAAAABIwAAAIEAvYfK3RIaAYmMHBOvyhKM41NaSmcgUMC3igPN5gUKJQvSnYmjuWG6CBr1CkF5UcDji7v19jG3qAD5lAMFn+L0CxgRr8TNaAU+hA4/tpAGkjm+dKYSyJgEdMIURweyyfUFXoerweR8AWW5xlovGKEWZTAfvJX9Zqvh8oMQ5UJLUUc="Now set the comment for this key (do not use spaces):fishy10:configuration users root preferences key (uncommitted)> set comment="LightningRSAKey" Commit the new key:fishy10:configuration users root preferences key (uncommitted)> commitVerify the key is there:fishy10:configuration users root preferences keys> lsKeys:NAME     MODIFIED              TYPE   COMMENT                                  key-000  2010-10-25 20:56:42   RSA    cycloneRSAKey                           key-001  2010-12-6 17:44:53    RSA    LightningRSAKey                         As you can see, we now have my new key, and a previous key I have created on this appliance.Running your Script over SSH from a Remote SystemHere I have created a basic test script, and saved it as test.ecma3:[geoff@lightning ~] cat test.ecma3 script// This is a test script, By Geoff Ongley 2010.printf("Testing script remotely over ssh\n");.Now, we can run this script remotely with our keyless login:[geoff@lightning ~] ssh -i .ssh/nas_key_rsa root@fishy10 < test.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Testing script remotely over sshPutting it Together - An Example Completed Quota Gathering ScriptSo now we have a lot of the basics to creating a script, let us do something useful, like, find out how much every user is using, on every share on the system (you will recognise some of the code from my previous examples): script/************************************** Quick and Dirty Quota Check script ** Written By Geoff Ongley            ** 25 October 2010                    **************************************/function getUserQuota(usr){        run('select ' + usr);        var username=get('name');        var usage=get('usage');        var quota=get('quota');        var usage_g=usage / 1073741824; // convert bytes to gigabytes        var quota_g=quota / 1073741824; // as above        var quota_percent=0        if (quota > 0)        {                quota_percent=(usage / quota)*(100/1);        }        printf("    %20s        %8.2f           %8.2f           %d%%\n",username,usage_g,quota_g,quota_percent);        run('done'); // done with this selected user}function getShareQuota(shar){        //printf("DEBUG: selecting share %s\n", shar);        run('select ' + shar);        printf("  SHARE: %s\n", shar);        try        {                run('users');                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","--------");                                users=list();                for(k=0; k < users.length; k++)                {                        user=users[k];                        getUserQuota(user);                }                run('done'); // exit user context        }        catch(err)        {                printf("    SKIPPING %s - This is NOT a NFS or CIFs share, not looking for users\n", shar);        }        run('done'); // done with this share}function getShares(proj){        //printf("DEBUG: selecting project %s\n",proj);        run('select ' + proj);        shares=list();        printf("Project: %s\n", proj);        for(j=0; j < shares.length; j++)        {                share=shares[j];                getShareQuota(share);        }        run('done'); // exit selected project}function getProjects(){        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                var project=projects[i];                getShares(project);        }        run('done'); // exit context for all projects}getProjects();.Which can be run as follows, and will print information like this:[geoff@lightning ~/FISHWORKS_SCRIPTS] ssh -i ~/.ssh/nas_key_rsa root@fishy10 < get_quota_utilisation.ecma3Pseudo-terminal will not be allocated because stdin is not a terminal.Project: another-project  SHARE: and-another                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                 geoffro            0.05            0.00        0%                   Billy            0.10            0.00        0%                    root            0.00            0.00        0%            testing-user            0.05            0.00        0%  SHARE: another-share                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                 geoffro            0.05            0.49        9%            testing-user            0.05            0.02        249%                   Billy            0.10            0.29        33%  SHARE: bob                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%  SHARE: more-shares-for-all                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                   Billy            0.10            0.00        0%            testing-user            0.05            0.00        0%                  nobody            0.00            0.00        0%                    root            0.00            0.00        0%                 geoffro            0.05            0.00        0%  SHARE: yep                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                    root            0.00            0.00        0%                  nobody            0.00            0.00        0%                   Billy            0.10            0.01        999%            testing-user            0.05            0.49        9%                 geoffro            0.05            0.00        0%Project: default  SHARE: Test-LUN    SKIPPING Test-LUN - This is NOT a NFS or CIFs share, not looking for users  SHARE: test-geoff                Username           Usage(G)       Quota(G)    Quota(%)                --------           --------       --------    --------                 geoffro            0.05            0.00        0%                    root            3.18           10.00        31%                    uucp            0.00            0.00        0%                  nobody            0.59            0.49        119%^CKilled by signal 2.Creating a WorkflowWorkflows are scripts that we store on the appliance, and can have the script execute either on request (even from the BUI), or on an event such as a threshold being met.Workflow BasicsA workflow allows you to create a simple process that can be executed either via the BUI interface interactively, or by an alert being raised (for some threshold being reached, for example).The basics parameters you will have to set for your "workflow object" (notice you're creating a variable, that embodies ECMAScript) are as follows (parameters is optional):name: A name for this workflowdescription: A Description for the workflowparameters: A set of input parameters (useful when you need user input to execute the workflow)execute: The code, the script itself to execute, which will be function (parameters)With parameters, you can specify things like this (slightly modified sample taken from the System Administration Guide):          ...parameters:        variableParam1:         {                             label: 'Name of Share',                             type: 'String'                  },                  variableParam2                  {                             label: 'Share Size',                             type: 'size'                  },execute: ....};  Note the commas separating the sections of name, parameters, execute, and so on. This is important!Also - there is plenty of properties you can set on the parameters for your workflow, these are described in the Sun ZFS Storage System Administration Guide.Creating a Basic Workflow from a Basic ScriptTo make a basic script into a basic workflow, you need to wrap the following around your script to create a 'workflow' object:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function() {// (basic script goes here, minus the "script" at the beginning, and "." at the end)}};However, it appears (at least in my experience to date) that the workflow object may only be happy with one function in the execute parameter - either that or I'm doing something wrong. As far as I can tell, after execute: you should only have a basic one function context like so:execute: function(){}To deal with this, and to give an example similar to our script earlier, I have created another simple quota check, to show the same basic functionality, but in a workflow format:var workflow = {name: 'Get User Quotas',description: 'Displays Quota Utilisation for each user on each share',execute: function () {        run('cd /');        run('shares');        projects=list();                for (i=0; i < projects.length; i++)        {                run('select ' + projects[i]);                shares=list('filesystem');                printf("Project: %s\n", projects[i]);                for(j=0; j < shares.length; j++)                {                        run('select ' +shares[j]);                        try                        {                                run('users');                                printf("  SHARE: %s\n", shares[j]);                                printf("    %20s        %11s    %11s    %3s\n","Username","Usage(G)","Quota(G)","Quota(%)");                                printf("    %20s        %11s    %11s    %4s\n","--------","--------","--------","-------");                                users=list();                                for(k=0; k < users.length; k++)                                {                                        run('select ' + users[k]);                                        username=get('name');                                        usage=get('usage');                                        quota=get('quota');                                        usage_g=usage / 1073741824; // convert bytes to gigabytes                                        quota_g=quota / 1073741824; // as above                                        quota_percent=0                                        if (quota > 0)                                        {                                                quota_percent=(usage / quota)*(100/1);                                        }                                        printf("    %20s        %8.2f   %8.2f   %d%%\n",username,usage_g,quota_g,quota_percent);                                        run('done');                                }                                run('done'); // exit user context                        }                        catch(err)                        {                        //      printf("    %s is a LUN, Not looking for users\n", shares[j]);                        }                        run('done'); // exit selected share context                }                run('done'); // exit project context        }        }};SummaryThe Sun ZFS Storage 7000 Appliance offers lots of different and interesting features to Sun/Oracle customers, including the world renowned Analytics. Hopefully the above will help you to think of new creative things you could be doing by taking advantage of one of the other neat features, the internal scripting engine!Some references are below to help you continue learning more, I'll update this post as I do the same! Enjoy...More information on ECMAScript 3A complete reference to ECMAScript 3 which will help you learn more of the details you may be interested in, can be found here:http://www.ecma-international.org/publications/files/ECMA-ST-ARCH/ECMA-262,%203rd%20edition,%20December%201999.pdfMore Information on Administering the Sun ZFS Storage 7000The Sun ZFS Storage 7000 System Administration guide can be a useful reference point, and can be found here:http://wikis.sun.com/download/attachments/186238602/2010_Q3_2_ADMIN.pdf

  Read the article

• NFS issue: clients can mount shares as NFSv3 but not as NFSv4 -- or how to debug NFS?

  - by tdn

  Problem description I have a file server running Debian. On it I have a few NFS shares. When I mount the shares from a client using NFSv3 (mount.nfs 10.0.0.51:/exports/video /mnt -o vers=3,soft,intr,timeo=10), it works. However, I would like to use NFSv4 because of improved security and performance. When I try to mount an NFSv4 share on malbec the mount command just hangs and finally times out after 2 minutes. How do I make the clients mount the NFSv4 shares as NFSv4? How do I troubleshoot NFS? There is no information in the syslog on neither client nor server. What are any errors in my configuration? Facts: Server is corvina(10.0.0.51) Client is malbec(10.0.0.1) Malbec runs Ubuntu 12.04 Server runs Debian 7 wheezy Both are connected through 1 GbE LAN. Firewalls are off. rpcinfo (root@malbec) (13-07-02 21:00) (P:0 L:1) [0] ~ # rpcinfo -p program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 4000 status 100024 1 tcp 4000 status (root@malbec) (13-07-02 21:00) (P:0 L:1) [0] ~ # rpcinfo -p corvina program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 4000 status 100024 1 tcp 4000 status 100003 3 udp 2049 nfs 100227 3 udp 2049 100021 1 udp 4003 nlockmgr 100021 3 udp 4003 nlockmgr 100021 4 udp 4003 nlockmgr 100021 1 tcp 4003 nlockmgr 100021 3 tcp 4003 nlockmgr 100021 4 tcp 4003 nlockmgr 100005 1 udp 4002 mountd 100005 1 tcp 4002 mountd 100005 2 udp 4002 mountd 100005 2 tcp 4002 mountd 100005 3 udp 4002 mountd 100005 3 tcp 4002 mountd tcpdump The following is output from tcpdump on malbec while running this command: # rpcinfo -p corvina ~ # tcpdump -i eth0 host 10.0.0.51 21:14:51.762083 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [S], seq 3069120722, win 14600, options [mss 1460,sackOK,TS val 146111 ecr 0,nop,wscale 7], length 0 21:14:51.762431 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [S.], seq 770684199, ack 3069120723, win 14480, options [mss 1460,sackOK,TS val 398850 ecr 146111,nop,wscale 7], length 0 21:14:51.762458 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [.], ack 1, win 115, options [nop,nop,TS val 146111 ecr 398850], length 0 21:14:51.762556 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [P.], seq 1:45, ack 1, win 115, options [nop,nop,TS val 146111 ecr 398850], length 44 21:14:51.762710 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [.], ack 45, win 114, options [nop,nop,TS val 398850 ecr 146111], length 0 21:14:51.763282 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [P.], seq 1:473, ack 45, win 114, options [nop,nop,TS val 398850 ecr 146111], length 472 21:14:51.763302 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [.], ack 473, win 123, options [nop,nop,TS val 146111 ecr 398850], length 0 21:14:51.764059 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [F.], seq 45, ack 473, win 123, options [nop,nop,TS val 146111 ecr 398850], length 0 21:14:51.764454 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [F.], seq 473, ack 46, win 114, options [nop,nop,TS val 398850 ecr 146111], length 0 21:14:51.764478 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [.], ack 474, win 123, options [nop,nop,TS val 146111 ecr 398850], length 0 The following is output from tcpdump on malbec while runing this command: ~ # time mount.nfs4 10.0.0.51:/ /mnt -o soft,intr,timeo=10 21:14:58.397327 IP malbec.vineyard.sikkerhed.org.872 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1298959870, win 14600, options [mss 1460,sackOK,TS val 147769 ecr 0,nop,wscale 7], length 0 21:14:58.397655 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.872: Flags [R.], seq 0, ack 1298959871, win 0, length 0 21:14:59.470270 IP malbec.vineyard.sikkerhed.org.854 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 4111013041, win 14600, options [mss 1460,sackOK,TS val 148038 ecr 0,nop,wscale 7], length 0 21:14:59.470569 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.854: Flags [R.], seq 0, ack 4111013042, win 0, length 0 21:15:01.506179 IP malbec.vineyard.sikkerhed.org.988 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1642454567, win 14600, options [mss 1460,sackOK,TS val 148547 ecr 0,nop,wscale 7], length 0 21:15:01.506514 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.988: Flags [R.], seq 0, ack 1642454568, win 0, length 0 21:15:05.542216 IP malbec.vineyard.sikkerhed.org.882 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 3844460520, win 14600, options [mss 1460,sackOK,TS val 149556 ecr 0,nop,wscale 7], length 0 21:15:05.542484 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.882: Flags [R.], seq 0, ack 3844460521, win 0, length 0 21:15:13.602228 IP malbec.vineyard.sikkerhed.org.969 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1317773588, win 14600, options [mss 1460,sackOK,TS val 151571 ecr 0,nop,wscale 7], length 0 21:15:13.602527 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.969: Flags [R.], seq 0, ack 1317773589, win 0, length 0 21:15:18.615027 ARP, Request who-has malbec.vineyard.sikkerhed.org tell corvina.vineyard.sikkerhed.org, length 46 21:15:18.615048 ARP, Reply malbec.vineyard.sikkerhed.org is-at cc:52:af:46:af:23 (oui Unknown), length 28 21:15:23.622223 IP malbec.vineyard.sikkerhed.org.1003 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2896563167, win 14600, options [mss 1460,sackOK,TS val 154076 ecr 0,nop,wscale 7], length 0 21:15:23.622557 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.1003: Flags [R.], seq 0, ack 2896563168, win 0, length 0 21:15:28.629913 ARP, Request who-has corvina.vineyard.sikkerhed.org tell malbec.vineyard.sikkerhed.org, length 28 21:15:28.630223 ARP, Reply corvina.vineyard.sikkerhed.org is-at 00:9c:02:ab:db:54 (oui Unknown), length 46 21:15:33.662200 IP malbec.vineyard.sikkerhed.org.727 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1334644196, win 14600, options [mss 1460,sackOK,TS val 156586 ecr 0,nop,wscale 7], length 0 21:15:33.663657 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.727: Flags [R.], seq 0, ack 1334644197, win 0, length 0 21:15:43.698207 IP malbec.vineyard.sikkerhed.org.rsync > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 688828331, win 14600, options [mss 1460,sackOK,TS val 159095 ecr 0,nop,wscale 7], length 0 21:15:43.698541 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.rsync: Flags [R.], seq 0, ack 688828332, win 0, length 0 21:15:48.707710 ARP, Request who-has malbec.vineyard.sikkerhed.org tell corvina.vineyard.sikkerhed.org, length 46 21:15:48.707726 ARP, Reply malbec.vineyard.sikkerhed.org is-at cc:52:af:46:af:23 (oui Unknown), length 28 21:15:53.738188 IP malbec.vineyard.sikkerhed.org.946 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2021272456, win 14600, options [mss 1460,sackOK,TS val 161605 ecr 0,nop,wscale 7], length 0 21:15:53.738519 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.946: Flags [R.], seq 0, ack 2021272457, win 0, length 0 21:16:03.806216 IP malbec.vineyard.sikkerhed.org.902 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 3889059201, win 14600, options [mss 1460,sackOK,TS val 164122 ecr 0,nop,wscale 7], length 0 21:16:03.806546 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.902: Flags [R.], seq 0, ack 3889059202, win 0, length 0 21:16:08.821900 ARP, Request who-has corvina.vineyard.sikkerhed.org tell malbec.vineyard.sikkerhed.org, length 28 21:16:08.822172 ARP, Reply corvina.vineyard.sikkerhed.org is-at 00:9c:02:ab:db:54 (oui Unknown), length 46 21:16:13.874209 IP malbec.vineyard.sikkerhed.org.712 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1480927452, win 14600, options [mss 1460,sackOK,TS val 166639 ecr 0,nop,wscale 7], length 0 21:16:13.874553 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.712: Flags [R.], seq 0, ack 1961062188, win 0, length 0 21:16:18.880588 ARP, Request who-has malbec.vineyard.sikkerhed.org tell corvina.vineyard.sikkerhed.org, length 46 21:16:18.880605 ARP, Reply malbec.vineyard.sikkerhed.org is-at cc:52:af:46:af:23 (oui Unknown), length 28 21:16:23.910209 IP malbec.vineyard.sikkerhed.org.758 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1375860626, win 14600, options [mss 1460,sackOK,TS val 169148 ecr 0,nop,wscale 7], length 0 21:16:23.910532 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.758: Flags [R.], seq 0, ack 1375860627, win 0, length 0 21:16:33.982258 IP malbec.vineyard.sikkerhed.org.694 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1769203987, win 14600, options [mss 1460,sackOK,TS val 171666 ecr 0,nop,wscale 7], length 0 21:16:33.982579 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.694: Flags [R.], seq 0, ack 1769203988, win 0, length 0 21:16:44.026241 IP malbec.vineyard.sikkerhed.org.841 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 530553783, win 14600, options [mss 1460,sackOK,TS val 174177 ecr 0,nop,wscale 7], length 0 21:16:44.026505 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.841: Flags [R.], seq 0, ack 530553784, win 0, length 0 21:16:46.213388 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [P.], seq 64:128, ack 33, win 325, options [nop,nop,TS val 174723 ecr 397437], length 64 21:16:46.213859 IP corvina.vineyard.sikkerhed.org.ssh > malbec.vineyard.sikkerhed.org.43460: Flags [P.], seq 33:65, ack 128, win 199, options [nop,nop,TS val 427466 ecr 174723], length 32 21:16:46.213883 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [.], ack 65, win 325, options [nop,nop,TS val 174723 ecr 427466], length 0 21:16:54.094242 IP malbec.vineyard.sikkerhed.org.kerberos-master > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2673083337, win 14600, options [mss 1460,sackOK,TS val 176694 ecr 0,nop,wscale 7], length 0 21:16:54.094568 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.kerberos-master: Flags [R.], seq 0, ack 2673083338, win 0, length 0 21:17:04.134227 IP malbec.vineyard.sikkerhed.org.1019 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2176607713, win 14600, options [mss 1460,sackOK,TS val 179204 ecr 0,nop,wscale 7], length 0 21:17:04.134566 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.1019: Flags [R.], seq 0, ack 2176607714, win 0, length 0 21:18:46.314021 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [P.], seq 128:192, ack 65, win 325, options [nop,nop,TS val 204749 ecr 427466], length 64 21:18:46.314462 IP corvina.vineyard.sikkerhed.org.ssh > malbec.vineyard.sikkerhed.org.43460: Flags [P.], seq 65:97, ack 192, win 199, options [nop,nop,TS val 457494 ecr 204749], length 32 21:18:46.314482 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [.], ack 97, win 325, options [nop,nop,TS val 204749 ecr 457494], length 0 21:18:51.317908 ARP, Request who-has corvina.vineyard.sikkerhed.org tell malbec.vineyard.sikkerhed.org, length 28 21:18:51.318177 ARP, Reply corvina.vineyard.sikkerhed.org is-at 00:9c:02:ab:db:54 (oui Unknown), length 46 mount command outputs mount.nfs4: Connection timed out mount.nfs4 10.0.0.51:/ /mnt -o soft,intr,timeo=10 0,00s user 0,00s system 0% cpu 2:05,80 total Returncode is 32 Server configuration I have enabled idmapd by adding NEED_IDMAPD=yes in /etc/default/nfs-common. Bind mounts in /etc/fstab: # nfs-audio /data/audio /exports/audio none bind 0 0 # nfs-clear /data/clear /exports/clear none bind 0 0 # nfs-video /data/video /exports/video none bind 0 0 /etc/exports: /exports 10.0.0.0/255.255.255.0(rw,no_root_squash,no_subtree_check,fsid=0,crossmnt) /exports/video 10.0.0.0/255.255.255.0(rw,no_root_squash,no_subtree_check,crossmnt) Output from # ls -al /exports total 20 drwxr-xr-x 5 root root 4096 Jul 2 14:14 ./ drwxr-xr-x 28 root root 4096 Jul 2 13:46 ../ drwxr-xr-x 7 tdn audio 4096 Jun 7 11:30 audio/ drwxr-xr-x 11 root root 4096 Jun 29 12:07 clear/ drwxrwx--- 12 tdn video 4096 Jun 7 09:46 video/

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• Implementing dry-run in bash scripts

  - by Apikot

  How would one implement a dry-run option in a bash script? I can think of either wrapping every single command in an if and echoing out the command instead of running it if the script is running with dry-run. Another way would be to define a function and then passing each command call through that function. Something like: function _run () { if [[ "$DRY_RUN" ]]; then echo $@ else $@ fi } _run mv /tmp/file /tmp/file2 DRY_RUN=true _run mv /tmp/file /tmp/file2 Is this just wrong and there is a much better way of doing it?

  Read the article

• Run Dialog: Tab Key dont complete commands

  - by Gilney

  I like to use the Tab key to complete/skip commands/links in Shells/Browsers when typing. But when I hit the tab key in "Run Dialog" causes focus leave Text box, so i'm forced to leave home keys to use arrow keys. Is there a way change this behavior? Edit: I found here a flag that enables autocomplete in Run Dialog. This doesn't solve the question, but it helps when the command you want is the first option listed, because you just press enter instead of moving to arrow key and select the command. In my case this solves about 80% of cases.

  Read the article

• Variable length Blob in hibernate?

  - by Seth

  I have a byte[] member in one of my persistable classes. Normally, I'd just annotate it with @Lob and @Column(name="foo", size=). In this particular case, however, the length of the byte[] can vary a lot (from ~10KB all the way up to ~100MB). If I annotate the column with a size of 128MB, I feel like I'll be wasting a lot of space for the small and mid-sized objects. Is there a variable length blob type I can use? Will hibernate take care of all of this for me behind the scenes without wasting space? What's the best way to go about this? Thanks!

  Read the article

• IIS7 - Specifying content-length header in ASP causes "connection reset" error

  - by MisterZimbu

  I'm migrating a series of websites from an existing IIS5 server to a brand new IIS7 web server. One of the pages pulls a data file from a blob in the database and serves it to the end user: Response.ContentType = rs("contentType") Response.AddHeader "Content-Disposition", "attachment;filename=" & Trim(rs("docName"))&rs("suffix")' let the browser know the file name Response.AddHeader "Content-Length", cstr(rs("docsize"))' let the browser know the file size Testing this in the new IIS7 install, I get a "Connection Reset" error in both Internet Explorer and Firefox. The document is served up correctly if the Content-Length header is removed (but then the user won't get a useful progress bar). Any ideas on how to correct this; whether it be a server configuration option or via code? Thanks.

  Read the article

• get length of wchar_t in c++

  - by Jacob

  Please, how can I find out the length of a variable of type wchar_t in c++?

  Read the article

• regedit to run in script, not in background

  - by karolrvn

  Hi. Is there a way for regedit to run in script, not in background. With /e (export) it runs in background and returns control to the console (and would return control to a script as well, i think). I want to wait for it to finish.

  Read the article

• SSIS Design Pattern: Loading Variable-Length Rows

  - by andyleonard

  Introduction I encounter flat file sources with variable-length rows on occassion. Here, I supply one SSIS Design Pattern for loading them. What's a Variable-Length Row Flat File? Great question - let's start with a definition. A variable-length row flat file is a text source of some flavor - comma-separated values (CSV), tab-delimited file (TDF), or even fixed-length, positional-, or ordinal-based (where the location of the data on the row defines its field). The major difference between a "normal"...(read more)

  Read the article

• Array length with pointers

  - by owca

  How in C++ get array length with pointers only ? I know that tab name is pointer to first element, but what next ?

  Read the article

• Maximum Method Name Length

  - by Josh

  Does anyone happen to know what the maximum length of a method name is in your programming language of choice? I was going to make this a C# specific question, but I think it would be nice to know across the spectrum. What are the factors involved as well: Does the language specification limit this? What does the compiler limit it to? Is it different on 32bit vs 64bit machines?

  Read the article

• jquery - check length of input field?

  - by KnockKnockWhosThere

  The code below is intended to enable the submit button once the user clicks in the textarea field. It works, but I'm trying to also make it so that it's only enabled if there's at least one character in the field. I tried wrapping it in: if($(this).val().length > 1) { } But, that didn't seem to work... Any ideas? $("#fbss").focus(function(){ $(this).select(); if($(this).val()=="Default text") { $(this).val(""); $("input[id=fbss-submit]").removeClass(); $("input[id=fbss-submit]").attr('disabled',false); $("input[id= fbss-submit]").attr('class','.enableSubmit'); if($('.charsRemaining')) { $('.charsRemaining').remove(); $("textarea[id=fbss]").maxlength({ maxCharacters: 190, status: true, statusClass: 'charsRemaining', statusText: 'characters left', notificationClass: 'notification', showAlert: false, alertText: 'You have exceeded the maximum amount of characters', slider: false }); } });

  Read the article

• Parsing String into multiple variable length String (C#)

  - by Nassign

  I am currently trying to convert a VB6 program into C#. There was extensive use of string splitting into structure. For example, Dim Sample AS String Sample = "John Doe New York Test Comment" Public Type Struct1 Name As String * 15 Address As String * 10 Comment As String * 20 End Type Dim dataStruct As Struct1 Set dataStruct = Sample When the dataStruct is set, it will automatically split value into the 3 structure member. Is there a special function to do this in C#. The only way I know how to do this is thru Attributes/Annotation describing the length and start position of string. Any other suggestion?

  Read the article

• Use concat and maintain length of variable

  - by user1682055

  I'm trying to use concat on some variables. These variables have been declared as chars: declare v_order_date char(10); declare v_quantity char(11); declare v_plant char(100); I have a cursor where I am setting these as some outputs. To call the results, I am setting v_msg as set v_msg := concat( v_msg, '\n', v_order_date, v_quantity, v_plant); However, the result I am getting when I select v_msg is: 2012-01-222501008 Creeping Buttercup but I want to maintain the length of the declared variables in my select that looks like this 2012-01-22 250 1008 Creeping Buttercup Are there any suggestions? Thank you.

  Read the article

• Why is run() not immediately called when start() called on a thread object in java

  - by pi

  Or is it? I have a thread object from: Thread myThread = new Thread(pObject); Where pObject is an object of a class implementing the Runnable interface and then I have the start method called on the thread object like so: myThread.start(); Now, my understanding is that when start() is called, the JVM implicitly (and immediately) calls the run() method which may be overridden (as it is in my case) However, in my case, it appears that the start() method is not called immediately (as desired) but until the other statements/methods are completed from the calling block i.e. if I had a method after the start() call like so: myThread.start(); doSomethingElse(); doSomthingElse() gets executed before the run() method is run at all. Perhaps I am wrong with the initial premise that run() is always called right after the start() is called. Please help! The desired again is making executing run() right after start(). Thanks.

  Read the article

• Script errors when run by launchd at startup, but not when run in Terminal

  - by Mechcozmo

  I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

  Read the article

• Using IF statements to find string length in array for alignment (Visual Basic)

  - by Brodoin

  My question is just as it says in the title. How would one use IF statements to find the string-length of content in an array, and then make it so that they show up in a Rich Text Box with the left sides aligned? Noting that one value in my array is a Decimal. Imports System.IO Imports System.Convert Public Class frmAll 'Declare Streamreader Private objReader As StreamReader 'Declare arrays to hold the information Private strNumber(24) As String Private strName(24) As String Private strSize(24) As String Private decCost(24) As Integer Private Sub frmAll_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Set objReader objReader = New StreamReader("products.csv") 'Call the FillArray sub to fill the array Call FillArray() End Sub Private Sub FillArray() 'Declare variables and arrays Dim decCost(24, 1) As Decimal Dim strFields() As String Dim strRec As String Dim intCount As Integer = 0 Dim chrdelim As Char = ToChar(",") 'Set strRec to read the lines strRec = objReader.ReadLine 'Do while loop to fill array. Do While strRec <> Nothing strFields = strRec.Split(chrdelim) strNumber(intCount) = strFields(0) strName(intCount) = strFields(1) strSize(intCount) = strFields(2) decCost(intCount, 0) = ToDecimal(strFields(3)) decCost(intCount, 1) = ToDecimal(strFields(4)) 'Set strRec to read the lines again strRec = objReader.ReadLine 'increment the index intCount += 1 Loop 'Call the Calculate sub for calculation Call Calculate(decCost) End Sub Private Sub Calculate(ByVal numIn(,) As Decimal) 'Define arrays to hold total cost Dim decRowTotal(24) As Decimal 'Define variables to hold the counters for rows and columns Dim intR As Integer Dim intC As Integer 'Calcualte total cost For intC = 0 To 1 For intR = 0 To 24 decRowTotal(intR) += numIn(intR, intC) * 1 Next Next 'Call the Output sub to configure the output. Call Output(numIn, decRowTotal) End Sub Private Sub Output(ByVal NumIn(,) As Decimal, _ ByVal RowTotalIn() As Decimal) 'Variables Dim strOut As String Dim intR As Integer = 0 Dim intC As Integer = 0 'Set header for output. strOut = "ID" & vbTab & "Item" & vbTab & vbTab & vbTab & "Size" & _ vbTab & vbTab & vbTab & vbTab & "Total Price" & _ vbCrLf & "---------- ... -------------------------" & vbCrLf 'For loop to add each line to strOut, setting 'the RowTotalIn to currency. For intC = 0 To 24 strOut &= strNumber(intC) & vbTab strOut &= strName(intC) & vbTab strOut &= strSize(intC) & vbTab strOut &= RowTotalIn(intC).ToString("c") & vbCrLf Next 'Add strOut to rbtAll rtbAll.Text = strOut End Sub End Class Output It shows up with vbTabs in my output, but still, it looks similar in that they are not aligned. The first two do, but after that they are not, and I am totally lost. P0001 Coffee - Colombian Supreme 24/Case: Pre-Ground 1.75 Oz Bags $16.50 P0002 Coffee - Hazelnut 24/Case: Pre-Ground 1.75 Oz Bags $24.00 P0003 Coffee - Mild Blend 24/Case: Pre-Ground 1.75 Oz Bags $20.50 P0004 Coffee - Assorted Flavors 18/Case. Pre-Ground 1.75 Oz Bags $23.50 P0005 Coffee - Decaf 24/Case: Pre-Ground 1.75 Oz Bags $20.50

  Read the article

• Script errors when run by launchd at startup, but not when run in Terminal

  - by Mechcozmo

  Hello. I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

  Read the article

• Mimic Windows' 'Run' window in C#/.NET

  - by chaiguy

  I would like to mimic the Run command in Windows in my program. In other words, I would like to give the user the ability to "run" an arbitrary piece of text exactly as would happen if they typed it into the run box. While System.Diagnostics.Process.Start() gets me close, I can't seem to get certain things like environment variables such as %AppData% working. I just keep getting the message "Windows cannot find '%AppData%'..."

  Read the article

• How to create a variadic (with variable length argument list) function wrapper in JavaScript

  - by U-D13

  The intention is to build a wrapper to provide a consistent method of calling native functions with variable arity on various script hosts - so that the script could be executed in a browser as well as in the Windows Script Host or other script engines. I am aware of 3 methods of which each one has its own drawbacks. eval() method: function wrapper () { var str = ''; for (var i=0; i<arguments.lenght; i++) str += (str ?', ':'') + ',arguments['+i+']'; return eval('[native_function] ('+str+')'); } switch() method: function wrapper () { switch (arguments.lenght) { case 0: return [native_function] (arguments[0]); break; case 1: return [native_function] (arguments[0], arguments[1]); break; ... case n: return [native_function] (arguments[0], arguments[1], ... arguments[n]); } } apply() method: function wrapper () { return [native_function].apply([native_function_namespace], arguments); } What's wrong with them you ask? Well, shall we delve into all the reasons why eval() is evil? And also all the string concatenation... Not a solution to be labeled "elegant". One can never know the maximum n and thus how many cases to prepare. This also would strech the script to immense proportions and sin against the holy DRY principle. The script could get executed on older (pre- JavaScript 1.3 / ECMA-262-3) engines that don't support the apply() method. Now the question part: is there any another solution out there?

  Read the article

• POST data getting lost: Content Length = 0

  - by Igor K

  I've been trying to find a solution for ages with no success. On our app, customers submit a form and on the next page we process it. Sometimes though the data never arrives. This seems to happen for just a few of our customers. Seems to happen with IE7 and using a proxy. Here's some headers, note the HTTP_VIA: X-REWRITE-URL: /process.asp?r=699743 APPL_MD_PATH: /LM/W3SVC/31555/ROOT APPL_PHYSICAL_PATH: C:\inetpub\vhosts\mysite.com\httpdocs\ AUTH_PASSWORD: AUTH_TYPE: AUTH_USER: CERT_COOKIE: CERT_FLAGS: CERT_ISSUER: CERT_KEYSIZE: CERT_SECRETKEYSIZE: CERT_SERIALNUMBER: CERT_SERVER_ISSUER: CERT_SERVER_SUBJECT: CERT_SUBJECT: CONTENT_LENGTH: 0 CONTENT_TYPE: application/x-www-form-urlencoded GATEWAY_INTERFACE: CGI/1.1 HTTPS: off HTTPS_KEYSIZE: HTTPS_SECRETKEYSIZE: HTTPS_SERVER_ISSUER: HTTPS_SERVER_SUBJECT: INSTANCE_ID: 31555 INSTANCE_META_PATH: /LM/W3SVC/31555 LOCAL_ADDR: XXX.XXX.XXX.XXX LOGON_USER: PATH_INFO: /process.asp PATH_TRANSLATED: C:\inetpub\vhosts\mysite.com\httpdocs\process.asp QUERY_STRING: r=699743 REMOTE_ADDR: YYY.YYY.YYY.YYY REMOTE_HOST: YYY.YYY.YYY.YYY REMOTE_USER: REQUEST_METHOD: POST SCRIPT_NAME: /process.asp SERVER_NAME: www.mysite.com SERVER_PORT: 80 SERVER_PORT_SECURE: 0 SERVER_PROTOCOL: HTTP/1.1 SERVER_SOFTWARE: Microsoft-IIS/7.0 URL: /process.asp HTTP_CONNECTION: Keep-Alive HTTP_PRAGMA: no-cache HTTP_VIA: 1.1 WEBCACHE-2 HTTP_CONTENT_LENGTH: 0 HTTP_CONTENT_TYPE: application/x-www-form-urlencoded HTTP_ACCEPT: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */* HTTP_ACCEPT_LANGUAGE: en-gb HTTP_COOKIE: ASPSESSIONIDQCKSDCTS=FENMPCMDCHEOENGOJPGDGPLN; HTTP_HOST: www.mysite.com HTTP_REFERER: http://www.mysite.com/theform.asp HTTP_USER_AGENT: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022) HTTP_UA_CPU: x86 HTTP_X_REWRITE_URL: /process.asp?r=699743

  Read the article

• Limit the length of SharePoint Rich Text Box

  - by Sachin

  Hi All, In My SharePoint site I have a list containing rich text box column. I want to limit the lenght of this text box but I could not found any property for that. Can anyone help me to achive this Thanks in advance Sachin katkar

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >