Search Results

Search found 9879 results on 396 pages for 'thread dump'.

Page 2/396 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Java thread dump where main thread has no call stack? (jsvc)

  - by dwhsix

  We have a java process running as a daemon (under jsvc). Every several days it just stops doing any work; output to the logfile stops (it is pretty verbose, on 5-minute intervals) and it consumes no CPU or IO. There are no exceptions logged in the logfile nor in syserr or sysout. The last log statement is just prior to a db commit being done, but there is no open connection on the db server (MySQL) and reviewing the code, there should always be additional log output after that, even if it had encountered an exception that was going to bubble up. The most curious thing I find is that in the thread dump (included below), there's no thread in our code at all, and the main thread seems to have no context whatsoever: "main" prio=10 tid=0x0000000000614000 nid=0x445d runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE As noted earlier, this is a daemon process running using jsvc, but I don't know if that has anything to do with it (I can restructure the code to also allow running it directly, to test). Any suggestions on what might be happening here? Thanks... dwh Full thread dump: Full thread dump Java HotSpot(TM) 64-Bit Server VM (14.2-b01 mixed mode): "MySQL Statement Cancellation Timer" daemon prio=10 tid=0x00002aaaf81b8800 nid=0x447b in Object.wait() [0x00002aaaf6a22000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab5556d50> (a java.util.TaskQueue) at java.lang.Object.wait(Object.java:485) at java.util.TimerThread.mainLoop(Timer.java:483) - locked <0x00002aaab5556d50> (a java.util.TaskQueue) at java.util.TimerThread.run(Timer.java:462) "Low Memory Detector" daemon prio=10 tid=0x00000000006a4000 nid=0x4479 runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE "CompilerThread1" daemon prio=10 tid=0x00000000006a1000 nid=0x4477 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "CompilerThread0" daemon prio=10 tid=0x000000000069d000 nid=0x4476 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "Signal Dispatcher" daemon prio=10 tid=0x000000000069b000 nid=0x4465 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "Finalizer" daemon prio=10 tid=0x0000000000678800 nid=0x4464 in Object.wait() [0x00002aaaf61d6000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab54a1cb8> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118) - locked <0x00002aaab54a1cb8> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134) at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159) "Reference Handler" daemon prio=10 tid=0x0000000000676800 nid=0x4463 in Object.wait() [0x00002aaaf60d5000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab54a1cf0> (a java.lang.ref.Reference$Lock) at java.lang.Object.wait(Object.java:485) at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116) - locked <0x00002aaab54a1cf0> (a java.lang.ref.Reference$Lock) "main" prio=10 tid=0x0000000000614000 nid=0x445d runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE "VM Thread" prio=10 tid=0x0000000000670000 nid=0x4462 runnable "GC task thread#0 (ParallelGC)" prio=10 tid=0x000000000061e000 nid=0x445e runnable "GC task thread#1 (ParallelGC)" prio=10 tid=0x0000000000620000 nid=0x445f runnable "GC task thread#2 (ParallelGC)" prio=10 tid=0x0000000000622000 nid=0x4460 runnable "GC task thread#3 (ParallelGC)" prio=10 tid=0x0000000000623800 nid=0x4461 runnable "VM Periodic Task Thread" prio=10 tid=0x00000000006a6800 nid=0x447a waiting on condition JNI global references: 797 Heap PSYoungGen total 162944K, used 48388K [0x00002aaadff40000, 0x00002aaaf2ab0000, 0x00002aaaf5490000) eden space 102784K, 47% used [0x00002aaadff40000,0x00002aaae2e81170,0x00002aaae63a0000) from space 60160K, 0% used [0x00002aaaeb850000,0x00002aaaeb850000,0x00002aaaef310000) to space 86720K, 0% used [0x00002aaae63a0000,0x00002aaae63a0000,0x00002aaaeb850000) PSOldGen total 699072K, used 699072K [0x00002aaab5490000, 0x00002aaadff40000, 0x00002aaadff40000) object space 699072K, 100% used [0x00002aaab5490000,0x00002aaadff40000,0x00002aaadff40000) PSPermGen total 21248K, used 9252K [0x00002aaab0090000, 0x00002aaab1550000, 0x00002aaab5490000) object space 21248K, 43% used [0x00002aaab0090000,0x00002aaab09993e8,0x00002aaab1550000)

  Read the article

• boost thread, test if thread is ready to join

  - by aaa

  hi. I would like to know if there is a way to test whenever thread finished execution and is waiting for joining. My guess was the use time_join. is there explicit way to test it?

  Read the article

• Launching a WPF Window in a Separate Thread, Part 1

  - by Reed

  Typically, I strongly recommend keeping the user interface within an application’s main thread, and using multiple threads to move the actual “work” into background threads.  However, there are rare times when creating a separate, dedicated thread for a Window can be beneficial.  This is even acknowledged in the MSDN samples, such as the Multiple Windows, Multiple Threads sample.  However, doing this correctly is difficult.  Even the referenced MSDN sample has major flaws, and will fail horribly in certain scenarios.  To ease this, I wrote a small class that alleviates some of the difficulties involved. The MSDN Multiple Windows, Multiple Threads Sample shows how to launch a new thread with a WPF Window, and will work in most cases.  The sample code (commented and slightly modified) works out to the following: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create and show the Window Window1 tempWindow = new Window1(); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Set the apartment state newWindowThread.SetApartmentState(ApartmentState.STA); // Make the thread a background thread newWindowThread.IsBackground = true; // Start the thread newWindowThread.Start(); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This sample creates a thread, marks it as single threaded apartment state, and starts the Dispatcher on that thread. That is the minimum requirements to get a Window displaying and handling messages correctly, but, unfortunately, has some serious flaws. The first issue – the created thread will run continuously until the application shuts down, given the code in the sample.  The problem is that the ThreadStart delegate used ends with running the Dispatcher.  However, nothing ever stops the Dispatcher processing.  The thread was created as a Background thread, which prevents it from keeping the application alive, but the Dispatcher will continue to pump dispatcher frames until the application shuts down. In order to fix this, we need to call Dispatcher.InvokeShutdown after the Window is closed.  This would require modifying the above sample to subscribe to the Window’s Closed event, and, at that point, shutdown the Dispatcher: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This eliminates the first issue.  Now, when the Window is closed, the new thread’s Dispatcher will shut itself down, which in turn will cause the thread to complete. The above code will work correctly for most situations.  However, there is still a potential problem which could arise depending on the content of the Window1 class.  This is particularly nasty, as the code could easily work for most windows, but fail on others. The problem is, at the point where the Window is constructed, there is no active SynchronizationContext.  This is unlikely to be a problem in most cases, but is an absolute requirement if there is code within the constructor of Window1 which relies on a context being in place. While this sounds like an edge case, it’s fairly common.  For example, if a BackgroundWorker is started within the constructor, or a TaskScheduler is built using TaskScheduler.FromCurrentSynchronizationContext() with the expectation of synchronizing work to the UI thread, an exception will be raised at some point.  Both of these classes rely on the existence of a proper context being installed to SynchronizationContext.Current, which happens automatically, but not until Dispatcher.Run is called.  In the above case, SynchronizationContext.Current will return null during the Window’s construction, which can cause exceptions to occur or unexpected behavior. Luckily, this is fairly easy to correct.  We need to do three things, in order, prior to creating our Window: Create and initialize the Dispatcher for the new thread manually Create a synchronization context for the thread which uses the Dispatcher Install the synchronization context Creating the Dispatcher is quite simple – The Dispatcher.CurrentDispatcher property gets the current thread’s Dispatcher and “creates a new Dispatcher if one is not already associated with the thread.”  Once we have the correct Dispatcher, we can create a SynchronizationContext which uses the dispatcher by creating a DispatcherSynchronizationContext.  Finally, this synchronization context can be installed as the current thread’s context via SynchronizationContext.SetSynchronizationContext.  These three steps can easily be added to the above via a single line of code: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create our context, and install it: SynchronizationContext.SetSynchronizationContext( new DispatcherSynchronizationContext( Dispatcher.CurrentDispatcher)); Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This now forces the synchronization context to be in place before the Window is created and correctly shuts down the Dispatcher when the window closes. However, there are quite a few steps.  In my next post, I’ll show how to make this operation more reusable by creating a class with a far simpler API…

  Read the article

• Inside the Concurrent Collections: ConcurrentBag

  - by Simon Cooper

  Unlike the other concurrent collections, ConcurrentBag does not really have a non-concurrent analogy. As stated in the MSDN documentation, ConcurrentBag is optimised for the situation where the same thread is both producing and consuming items from the collection. We'll see how this is the case as we take a closer look. Again, I recommend you have ConcurrentBag open in a decompiler for reference. Thread Statics ConcurrentBag makes heavy use of thread statics - static variables marked with ThreadStaticAttribute. This is a special attribute that instructs the CLR to scope any values assigned to or read from the variable to the executing thread, not globally within the AppDomain. This means that if two different threads assign two different values to the same thread static variable, one value will not overwrite the other, and each thread will see the value they assigned to the variable, separately to any other thread. This is a very useful function that allows for ConcurrentBag's concurrency properties. You can think of a thread static variable: [ThreadStatic] private static int m_Value; as doing the same as: private static Dictionary<Thread, int> m_Values; where the executing thread's identity is used to automatically set and retrieve the corresponding value in the dictionary. In .NET 4, this usage of ThreadStaticAttribute is encapsulated in the ThreadLocal class. Lists of lists ConcurrentBag, at its core, operates as a linked list of linked lists: Each outer list node is an instance of ThreadLocalList, and each inner list node is an instance of Node. Each outer ThreadLocalList is owned by a particular thread, accessible through the thread local m_locals variable: private ThreadLocal<ThreadLocalList<T>> m_locals It is important to note that, although the m_locals variable is thread-local, that only applies to accesses through that variable. The objects referenced by the thread (each instance of the ThreadLocalList object) are normal heap objects that are not specific to any thread. Thinking back to the Dictionary analogy above, if each value stored in the dictionary could be accessed by other means, then any thread could access the value belonging to other threads using that mechanism. Only reads and writes to the variable defined as thread-local are re-routed by the CLR according to the executing thread's identity. So, although m_locals is defined as thread-local, the m_headList, m_nextList and m_tailList variables aren't. This means that any thread can access all the thread local lists in the collection by doing a linear search through the outer linked list defined by these variables. Adding items So, onto the collection operations. First, adding items. This one's pretty simple. If the current thread doesn't already own an instance of ThreadLocalList, then one is created (or, if there are lists owned by threads that have stopped, it takes control of one of those). Then the item is added to the head of that thread's list. That's it. Don't worry, it'll get more complicated when we account for the other operations on the list! Taking & Peeking items This is where it gets tricky. If the current thread's list has items in it, then it peeks or removes the head item (not the tail item) from the local list and returns that. However, if the local list is empty, it has to go and steal another item from another list, belonging to a different thread. It iterates through all the thread local lists in the collection using the m_headList and m_nextList variables until it finds one that has items in it, and it steals one item from that list. Up to this point, the two threads had been operating completely independently. To steal an item from another thread's list, the stealing thread has to do it in such a way as to not step on the owning thread's toes. Recall how adding and removing items both operate on the head of the thread's linked list? That gives us an easy way out - a thread trying to steal items from another thread can pop in round the back of another thread's list using the m_tail variable, and steal an item from the back without the owning thread knowing anything about it. The owning thread can carry on completely independently, unaware that one of its items has been nicked. However, this only works when there are at least 3 items in the list, as that guarantees there will be at least one node between the owning thread performing operations on the list head and the thread stealing items from the tail - there's no chance of the two threads operating on the same node at the same time and causing a race condition. If there's less than three items in the list, then there does need to be some synchronization between the two threads. In this case, the lock on the ThreadLocalList object is used to mediate access to a thread's list when there's the possibility of contention. Thread synchronization In ConcurrentBag, this is done using several mechanisms: Operations performed by the owner thread only take out the lock when there are less than three items in the collection. With three or greater items, there won't be any conflict with a stealing thread operating on the tail of the list. If a lock isn't taken out, the owning thread sets the list's m_currentOp variable to a non-zero value for the duration of the operation. This indicates to all other threads that there is a non-locked operation currently occuring on that list. The stealing thread always takes out the lock, to prevent two threads trying to steal from the same list at the same time. After taking out the lock, the stealing thread spinwaits until m_currentOp has been set to zero before actually performing the steal. This ensures there won't be a conflict with the owning thread when the number of items in the list is on the 2-3 item borderline. If any add or remove operations are started in the meantime, and the list is below 3 items, those operations try to take out the list's lock and are blocked until the stealing thread has finished. This allows a thread to steal an item from another thread's list without corrupting it. What about synchronization in the collection as a whole? Collection synchronization Any thread that operates on the collection's global structure (accessing anything outside the thread local lists) has to take out the collection's global lock - m_globalListsLock. This single lock is sufficient when adding a new thread local list, as the items inside each thread's list are unaffected. However, what about operations (such as Count or ToArray) that need to access every item in the collection? In order to ensure a consistent view, all operations on the collection are stopped while the count or ToArray is performed. This is done by freezing the bag at the start, performing the global operation, and unfreezing at the end: The global lock is taken out, to prevent structural alterations to the collection. m_needSync is set to true. This notifies all the threads that they need to take out their list's lock irregardless of what operation they're doing. All the list locks are taken out in order. This blocks all locking operations on the lists. The freezing thread waits for all current lockless operations to finish by spinwaiting on each m_currentOp field. The global operation can then be performed while the bag is frozen, but no other operations can take place at the same time, as all other threads are blocked on a list's lock. Then, once the global operation has finished, the locks are released, m_needSync is unset, and normal concurrent operation resumes. Concurrent principles That's the essence of how ConcurrentBag operates. Each thread operates independently on its own local list, except when they have to steal items from another list. When stealing, only the stealing thread is forced to take out the lock; the owning thread only has to when there is the possibility of contention. And a global lock controls accesses to the structure of the collection outside the thread lists. Operations affecting the entire collection take out all locks in the collection to freeze the contents at a single point in time. So, what principles can we extract here? Threads operate independently Thread-static variables and ThreadLocal makes this easy. Threads operate entirely concurrently on their own structures; only when they need to grab data from another thread is there any thread contention. Minimised lock-taking Even when two threads need to operate on the same data structures (one thread stealing from another), they do so in such a way such that the probability of actually blocking on a lock is minimised; the owning thread always operates on the head of the list, and the stealing thread always operates on the tail. Management of lockless operations Any operations that don't take out a lock still have a 'hook' to force them to lock when necessary. This allows all operations on the collection to be stopped temporarily while a global snapshot is taken. Hopefully, such operations will be short-lived and infrequent. That's all the concurrent collections covered. I hope you've found it as informative and interesting as I have. Next, I'll be taking a closer look at ThreadLocal, which I came across while analyzing ConcurrentBag. As you'll see, the operation of this class deserves a much closer look.

  Read the article

• C# making dictionary access thread-safe?

  - by Tom

  Hi, whats is the easiest way to make C# dictionary access thread safe? Preferablly just using lock(object) but any other ideas welcome!

  Read the article

• How do I have 1 UI thread wait for another UI thread

  - by Java Doe

  I have two UI threads. I want to make sure the first one is finishing running, and then run the other one. How could I do that? Thanks a lot!

  Read the article

• create dump file from database in mysql

  - by chetan

  following is the that I create dump from mysql database. mysql -u root tempbkk ttt.dump but I want to create a dump that exclude one or more file while creating dump from database we select.What is the command for that ?

  Read the article

• Dump memory of process in Window 7?

  - by abmv

  Is there any tool to dump the running application from memory n Windows 7?

  Read the article

• The best way to make full system dump on Centos [duplicate]

  - by tester3

  This question already has an answer here: Centos 5 Full backup 1 answer I am on Centos 6.5 with a lot of soft and services installed and working. Also I've got a lot of configs which damaged my brain and I dont want to do it again:) So, can anyone please advice the best way to make a full system dump with all data, so I need only to copy-paste them to new system to get my system ready on the other machine. Or something like that? P.S. Data on my hdd is encrypted, and I'd liked and encrypted dump too. Please help:)

  Read the article

• Introducing the Model Thread View Thread Pattern

  Reduce threading code, and increase UI responsiveness with a new pattern extending MVVM.

  Read the article

• Usinng svnadmin dump to revert the latest revision committed

  - by Wux

  What I need is that the latest (mistake) revision being reverted and that the repository does not store it in anyway. That is, I'm trying to erase the latest revision out of existence, NOT trying to fix things by coming back to the latest-1 revision. In other words, I want to avoid the repository growing in size. Suppose head revision is 100. I knew that the suggested answer is that svnadmin dump -r0:80 old-repo | svnadmin load --force-uuid new-repo. What I'm confusing myself about is why not svnadmin dump -r81:100 old-repo Why the first and not the second solution? I suppose svnadmin dump will erase the repository completely? And keeping only revision 0 - 80 in a dump file? Is my understanding of "taking a part out of the repository into a dump file" about svnadmin dump completely wrong? (That is revision 81 - 100 is still there) Sincere apologies if this has been asked. I did spend some time searching though no specific things about this were found. A topic link in case I miss it would be greatly appreciated.

  Read the article

• SIlverlight 4RC threading - can a new Thread return the UI Thread

  - by Darko Z

  Hi all, Let's say I have a situation in Silverlight where there is a background thread (guaranteed to NOT be the UI thread) doing some work and it needs to create a new thread. Something like this: //running in a background thread Thread t = new Thread(new ThreadStart(delegate{}); t.Start(); Lets also say that the UI thread at this particular time is just hanging around doing nothing. Keeping in mind that I am not that knowledgeable about the Silverlight threading model, is there any danger of the new Thread() call giving me the UI thread? The motivation or what I am trying to achieve is not important - I do not want modification to the existing code. I just want to know if there is a possibility of getting the UI thread back unexpectedly. Cheers

  Read the article

• Thread sleep and thread join.

  - by Dhruv Gairola

  hi guys, if i put a thread to sleep in a loop, netbeans gives me a caution saying Invoking Thread.sleep in loop can cause performance problems. However, if i were to replace the sleep with join, no such caution is given. Both versions compile and work fine tho. My code is below (check the last few lines for "Thread.sleep() vs t.join()"). public class Test{ //Display a message, preceded by the name of the current thread static void threadMessage(String message) { String threadName = Thread.currentThread().getName(); System.out.format("%s: %s%n", threadName, message); } private static class MessageLoop implements Runnable { public void run() { String importantInfo[] = { "Mares eat oats", "Does eat oats", "Little lambs eat ivy", "A kid will eat ivy too" }; try { for (int i = 0; i < importantInfo.length; i++) { //Pause for 4 seconds Thread.sleep(4000); //Print a message threadMessage(importantInfo[i]); } } catch (InterruptedException e) { threadMessage("I wasn't done!"); } } } public static void main(String args[]) throws InterruptedException { //Delay, in milliseconds before we interrupt MessageLoop //thread (default one hour). long patience = 1000 * 60 * 60; //If command line argument present, gives patience in seconds. if (args.length > 0) { try { patience = Long.parseLong(args[0]) * 1000; } catch (NumberFormatException e) { System.err.println("Argument must be an integer."); System.exit(1); } } threadMessage("Starting MessageLoop thread"); long startTime = System.currentTimeMillis(); Thread t = new Thread(new MessageLoop()); t.start(); threadMessage("Waiting for MessageLoop thread to finish"); //loop until MessageLoop thread exits while (t.isAlive()) { threadMessage("Still waiting..."); //Wait maximum of 1 second for MessageLoop thread to //finish. /*******LOOK HERE**********************/ Thread.sleep(1000);//issues caution unlike t.join(1000) /**************************************/ if (((System.currentTimeMillis() - startTime) > patience) && t.isAlive()) { threadMessage("Tired of waiting!"); t.interrupt(); //Shouldn't be long now -- wait indefinitely t.join(); } } threadMessage("Finally!"); } } As i understand it, join waits for the other thread to complete, but in this case, arent both sleep and join doing the same thing? Then why does netbeans throw the caution?

  Read the article

• evaluation of a java thread dump

  - by raticulin

  I got a thread dump of one of my processes. It has a bunch of these threads. I guess they are keeping a bunch of memory so I am getting OOM. "Thread-8264" prio=6 tid=0x4c94ac00 nid=0xf3c runnable [0x4fe7f000] java.lang.Thread.State: RUNNABLE at java.util.zip.Inflater.inflateBytes(Native Method) at java.util.zip.Inflater.inflate(Inflater.java:223) - locked <0x0c9bc640 (a java.util.zip.Inflater) at org.apache.commons.compress.archivers.zip.ZipArchiveInputStream.read(ZipArchiveInputStream.java:235) at com.my.ZipExtractorCommonsCompress.extract(ZipExtractorCommonsCompress.java:48) at com.my.CustomThreadedExtractorWrapper$ExtractionThread.run(CustomThreadedExtractorWrapper.java:151) Locked ownable synchronizers: - None "Thread-8241" prio=6 tid=0x4c94a400 nid=0xb8c runnable [0x4faef000] java.lang.Thread.State: RUNNABLE at java.util.zip.Inflater.inflateBytes(Native Method) at java.util.zip.Inflater.inflate(Inflater.java:223) - locked <0x0c36b808 (a java.util.zip.Inflater) at org.apache.commons.compress.archivers.zip.ZipArchiveInputStream.read(ZipArchiveInputStream.java:235) at com.my.ZipExtractorCommonsCompress.extract(ZipExtractorCommonsCompress.java:48) at com.my.CustomThreadedExtractorWrapper$ExtractionThread.run(CustomThreadedExtractorWrapper.java:151) Locked ownable synchronizers: - None I am trying to find out how it arrived to this situation. CustomThreadedExtractorWrapper is a wrapper class that fires a thread to do some work (ExtractionThread, which uses ZipExtractorCommonsCompress to extract zip contents from a compressed stream). If the task is taking too long, ExtractionThread.interrupt(); is called to cancel the operation. I can see in my logs that the cancellation happened 25 times. And I see 21 of these threads in my dump. My questions: What is the status of these threads? Alive and running? Blocked somehow? They did not die with .interrupt() apparently? Is there a sure way to really kill a thread? What does really mean 'locked ' in the stack trace? Line 223 in Inflater.java is: public synchronized int inflate(byte[] b, int off, int len) { ... //return is line 223 return inflateBytes(b, off, len); }

  Read the article

• Dump output from REPL

  - by Ankit Soni

  I'm writing SML programs, and I'd like a way to quickly see the output from running a program in the REPL without actually running the REPL (to quickly see if a program has syntax errors - I plan to use this as a make program for .sml files in vim to view the output inside vim).. Currently, I have this: sml file.sml | echo -e "\004" So it runs the program, and then echoes Ctrl-D to exit the REPL. The problem is that its too quick to send the Ctrl-D key, so there is no output. I tried this too: sml file.sml | sleep 2 ; echo -e "\004" But that isn't doing it either. Any ideas on how I can get a dump of the output from the REPL?

  Read the article

• Monitor.Wait, Pulse - When worker thread should conditionally behave as an actual worker thread

  - by Griever

  My particular scenario: - Main thread starts a worker thread. - Main thread needs to block itself until either worker thread is completed (yeah funny) or worker thread itself informs main thread to go on Alright, so what I did in main thread: wokerThread.Start(lockObj); lock(lockObj) Monitor.Wait(lockObj); Somewhere in worker thread: if(mainThreadShouldGoOn) lock(lockObj) Monitor.Pulse(lockObj); Also, at the end of worker thread: lock(lockObj) Monitor.Pulse(lockObj); So far, it's working perfect. But is it a good solution? Is there a better one?

  Read the article

• XNA Xbox 360 Content Manager Thread freezing Draw Thread

  - by Alikar

  I currently have a game that takes in large images, easily bigger than 1MB, to serve as backgrounds. I know exactly when this transition is supposed to take place, so I made a loader class to handle loading these large images in the background, but when I load the images it still freezes the main thread where the drawing takes place. Since this code runs on the 360 I move the thread to the 4th hardware thread, but that doesn't seem to help. Below is the class I am using. Any thoughts as to why my new content manager which should be in its own thread is interrupting the draw in my main thread would be appreciated. namespace FileSystem { /// <summary> /// This is used to reference how many objects reference this texture. /// Everytime someone references a texture we increase the iNumberOfReferences. /// When a class calls remove on a specific texture we check to see if anything /// else is referencing the class, if it is we don't remove it. If there isn't /// anything referencing the texture its safe to dispose of. /// </summary> class TextureContainer { public uint uiNumberOfReferences = 0; public Texture2D texture; } /// <summary> /// This class loads all the files from the Content. /// </summary> static class FileManager { static Microsoft.Xna.Framework.Content.ContentManager Content; static EventWaitHandle wh = new AutoResetEvent(false); static Dictionary<string, TextureContainer> Texture2DResourceDictionary; static List<Texture2D> TexturesToDispose; static List<String> TexturesToLoad; static int iProcessor = 4; private static object threadMutex = new object(); private static object Texture2DMutex = new object(); private static object loadingMutex = new object(); private static bool bLoadingTextures = false; /// <summary> /// Returns if we are loading textures or not. /// </summary> public static bool LoadingTexture { get { lock (loadingMutex) { return bLoadingTextures; } } } /// <summary> /// Since this is an static class. This is the constructor for the file loadeder. This is the version /// for the Xbox 360. /// </summary> /// <param name="_Content"></param> public static void Initalize(IServiceProvider serviceProvider, string rootDirectory, int _iProcessor ) { Content = new Microsoft.Xna.Framework.Content.ContentManager(serviceProvider, rootDirectory); Texture2DResourceDictionary = new Dictionary<string, TextureContainer>(); TexturesToDispose = new List<Texture2D>(); iProcessor = _iProcessor; CreateThread(); } /// <summary> /// Since this is an static class. This is the constructor for the file loadeder. /// </summary> /// <param name="_Content"></param> public static void Initalize(IServiceProvider serviceProvider, string rootDirectory) { Content = new Microsoft.Xna.Framework.Content.ContentManager(serviceProvider, rootDirectory); Texture2DResourceDictionary = new Dictionary<string, TextureContainer>(); TexturesToDispose = new List<Texture2D>(); CreateThread(); } /// <summary> /// Creates the thread incase we wanted to set up some parameters /// Outside of the constructor. /// </summary> static public void CreateThread() { Thread t = new Thread(new ThreadStart(StartThread)); t.Start(); } // This is the function that we thread. static public void StartThread() { //BBSThreadClass BBSTC = (BBSThreadClass)_oData; FileManager.Execute(); } /// <summary> /// This thread shouldn't be called by the outside world. /// It allows the File Manager to loop. /// </summary> static private void Execute() { // Make sure our thread is on the correct processor on the XBox 360. #if WINDOWS #else Thread.CurrentThread.SetProcessorAffinity(new int[] { iProcessor }); Thread.CurrentThread.IsBackground = true; #endif // This loop will load textures into ram for us away from the main thread. while (true) { wh.WaitOne(); // Locking down our data while we process it. lock (threadMutex) { lock (loadingMutex) { bLoadingTextures = true; } bool bContainsKey = false; for (int con = 0; con < TexturesToLoad.Count; con++) { // If we have already loaded the texture into memory reference // the one in the dictionary. lock (Texture2DMutex) { bContainsKey = Texture2DResourceDictionary.ContainsKey(TexturesToLoad[con]); } if (bContainsKey) { // Do nothing } // Otherwise load it into the dictionary and then reference the // copy in the dictionary else { TextureContainer TC = new TextureContainer(); TC.uiNumberOfReferences = 1; // We start out with 1 referece. // Loading the texture into memory. try { TC.texture = Content.Load<Texture2D>(TexturesToLoad[con]); // This is passed into the dictionary, thus there is only one copy of // the texture in memory. // There is an issue with Sprite Batch and disposing textures. // This will have to wait until its figured out. lock (Texture2DMutex) { bContainsKey = Texture2DResourceDictionary.ContainsKey(TexturesToLoad[con]); Texture2DResourceDictionary.Add(TexturesToLoad[con], TC); } // We don't have the find the reference to the container since we // already have it. } // Occasionally our texture will already by loaded by another thread while // this thread is operating. This mainly happens on the first level. catch (Exception e) { // If this happens we don't worry about it since this thread only loads // texture data and if its already there we don't need to load it. } } Thread.Sleep(100); } } lock (loadingMutex) { bLoadingTextures = false; } } } static public void LoadTextureList(List<string> _textureList) { // Ensuring that we can't creating threading problems. lock (threadMutex) { TexturesToLoad = _textureList; } wh.Set(); } /// <summary> /// This loads a 2D texture which represents a 2D grid of Texels. /// </summary> /// <param name="_textureName">The name of the picture you wish to load.</param> /// <returns>Holds the image data.</returns> public static Texture2D LoadTexture2D( string _textureName ) { TextureContainer temp; lock (Texture2DMutex) { bool bContainsKey = false; // If we have already loaded the texture into memory reference // the one in the dictionary. lock (Texture2DMutex) { bContainsKey = Texture2DResourceDictionary.ContainsKey(_textureName); if (bContainsKey) { temp = Texture2DResourceDictionary[_textureName]; temp.uiNumberOfReferences++; // Incrementing the number of references } // Otherwise load it into the dictionary and then reference the // copy in the dictionary else { TextureContainer TC = new TextureContainer(); TC.uiNumberOfReferences = 1; // We start out with 1 referece. // Loading the texture into memory. try { TC.texture = Content.Load<Texture2D>(_textureName); // This is passed into the dictionary, thus there is only one copy of // the texture in memory. } // Occasionally our texture will already by loaded by another thread while // this thread is operating. This mainly happens on the first level. catch(Exception e) { temp = Texture2DResourceDictionary[_textureName]; temp.uiNumberOfReferences++; // Incrementing the number of references } // There is an issue with Sprite Batch and disposing textures. // This will have to wait until its figured out. Texture2DResourceDictionary.Add(_textureName, TC); // We don't have the find the reference to the container since we // already have it. temp = TC; } } } // Return a reference to the texture return temp.texture; } /// <summary> /// Go through our dictionary and remove any references to the /// texture passed in. /// </summary> /// <param name="texture">Texture to remove from texture dictionary.</param> public static void RemoveTexture2D(Texture2D texture) { foreach (KeyValuePair<string, TextureContainer> pair in Texture2DResourceDictionary) { // Do our references match? if (pair.Value.texture == texture) { // Only one object or less holds a reference to the // texture. Logically it should be safe to remove. if (pair.Value.uiNumberOfReferences <= 1) { // Grabing referenc to texture TexturesToDispose.Add(pair.Value.texture); // We are about to release the memory of the texture, // thus we make sure no one else can call this member // in the dictionary. Texture2DResourceDictionary.Remove(pair.Key); // Once we have removed the texture we don't want to create an exception. // So we will stop looking in the list since it has changed. break; } // More than one Object has a reference to this texture. // So we will not be removing it from memory and instead // simply marking down the number of references by 1. else { pair.Value.uiNumberOfReferences--; } } } } /*public static void DisposeTextures() { int Count = TexturesToDispose.Count; // If there are any textures to dispose of. if (Count > 0) { for (int con = 0; con < TexturesToDispose.Count; con++) { // =!THIS REMOVES THE TEXTURE FROM MEMORY!= // This is not like a normal dispose. This will actually // remove the object from memory. Texture2D is inherited // from GraphicsResource which removes it self from // memory on dispose. Very nice for game efficency, // but "dangerous" in managed land. Texture2D Temp = TexturesToDispose[con]; Temp.Dispose(); } // Remove textures we've already disposed of. TexturesToDispose.Clear(); } }*/ /// <summary> /// This loads a 2D texture which represnets a font. /// </summary> /// <param name="_textureName">The name of the font you wish to load.</param> /// <returns>Holds the font data.</returns> public static SpriteFont LoadFont( string _fontName ) { SpriteFont temp = Content.Load<SpriteFont>( _fontName ); return temp; } /// <summary> /// This loads an XML document. /// </summary> /// <param name="_textureName">The name of the XML document you wish to load.</param> /// <returns>Holds the XML data.</returns> public static XmlDocument LoadXML( string _fileName ) { XmlDocument temp = Content.Load<XmlDocument>( _fileName ); return temp; } /// <summary> /// This loads a sound file. /// </summary> /// <param name="_fileName"></param> /// <returns></returns> public static SoundEffect LoadSound( string _fileName ) { SoundEffect temp = Content.Load<SoundEffect>(_fileName); return temp; } } }

  Read the article

• Difference between Thread.Sleep(0) and Thread.Yield()

  - by Xose Lluis

  As Java has had Sleep and Yield from long ago, I've found answers for that platform, but not for .Net .Net 4 includes the new Thread.Yield() static method. Previously the common way to hand over the CPU to other process was Thread.Sleep(0). Apart from Thread.Yield() returning a boolean, are there other performance, OS internals differences? For example, I'm not sure if Thread.Sleep(0) checks if other thread is ready to run before changing the current Thread to waiting state... if that's not the case, when no other threads are ready, Thread.Sleep(0) would seem rather worse that Thread.Yield().

  Read the article

• How to check the backtrace of a "USER process" in the Linux Kernel Crash Dump

  - by Biswajit

  I was trying to debug a USER Process in Linux Crash Dump. The normal steps to go to the crash dump are: Go to the path where the dump is located. Use the command crash kernel_link dump.201104181135. Where kernel_link is a soft link I have created for vmlinux image. Now you will be in the CRASH prompt. If you run the command foreach <PID Of the process> bt Eg: crash> **foreach 6920 bt** **PID: 6920 TASK: ffff88013caaa800 CPU: 1 COMMAND: **"**climmon**"**** #0 [ffff88012d2cd9c8] **schedule** at ffffffff8130b76a #1 [ffff88012d2cdab0] **schedule_timeout** at ffffffff8130bbe7 #2 [ffff88012d2cdb50] **schedule_timeout_uninterruptible** at ffffffff8130bc2a #3 [ffff88012d2cdb60] **__alloc_pages_nodemask** at ffffffff810b9e45 #4 [ffff88012d2cdc60] **alloc_pages_curren**t at ffffffff810e1c8c #5 [ffff88012d2cdc90] **__page_cache_alloc** at ffffffff810b395a #6 [ffff88012d2cdcb0] **__do_page_cache_readahead** at ffffffff810bb592 #7 [ffff88012d2cdd30] **ra_submit** at ffffffff810bb6ba #8 [ffff88012d2cdd40] **filemap_fault** at ffffffff810b3e4e #9 [ffff88012d2cdda0] **__do_fault** at ffffffff810caa5f #10 [ffff88012d2cde50] **handle_mm_fault** at ffffffff810cce69 #11 [ffff88012d2cdf00] **do_page_fault** at ffffffff8130f560 #12 [ffff88012d2cdf50] **page_fault** at ffffffff8130d3f5 RIP: 00007fd02b7e9071 RSP: 0000000040e86ea0 RFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fd02b7e9071 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040e86ec0 RBP: 0000000040e87140 R8: 0000000000000800 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff16ec43d0 R13: 00007fd02bcadf00 R14: 0000000040e87950 R15: 0000000000001000 ORIG_RAX: ffffffffffffffff CS: 0033 SS: 002b If you check the above backtrace it shows the kernel functions used for scheduling/handling page fault but not the functions that were executed in the USER process (here eg. climmon). So I am not able to debug this process as I am not able to see the functions executed in that process. Can any one help me with this case?

  Read the article

• Heap Dump Root Classes

  - by Adnan Memon

  We have production system going into infinite loop of full gc and memory drops form 8 gigs to like 1 MB in just 2 minutes. After taking heap dump it tells me there an is an array of java.lang.Object ([Ljava.lang.Object) with millions of java.lang.String objects having same String taking 99% of heap. But it doesn't tell me which class is referencing to this array so that I can fix it in the code. I took the heap dump using jmap tool on JDK 6 and used JProfiler, NetBeans, SAP Memory Analyzer and IBM Memory Analyzer but none of those tell me what is causing this huge array of objects?? ... like what class is referencing to it or contains it. Do I have to take a different dump with different config in order to get that info? ... Or anything else that can help me find out the culprit class causing this ... it will help a lot.

  Read the article

• Weird Apache Crash (with Dump) zend_hash_find (), libphp5.so

  - by Jacob84

  To be honest I don't have experience working with Apache. I'm just putting the best of my intentions on solving this and don't know if I'm making it right. So any help will be greatly appreciated. We have a php page wich is throwing the following message in the browser: Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. The logs from /var/log/httpd doesn't seem to help because It seems that the Apache is unable to write any information. So the exception or error is preventing the writing (maybe ocurring in some stage of the process that makes impossible to log?). I've read about the procedure to make dumps of the apache, and here we have the content: Reading symbols from /lib64/libgpg-error.so.0...(no debugging symbols found)...done. Loaded symbols for /lib64/libgpg-error.so.0 Reading symbols from /usr/lib64/php/modules/zip.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/php/modules/zip.so Core was generated by `/usr/sbin/httpd'. Program terminated with signal 11, Segmentation fault. 0 0x00007fb828fff712 in zend_hash_find () from /etc/httpd/modules/libphp5.so Missing separate debuginfos, use: debuginfo-install httpd-2.2.15-15.el6.centos.1.x86_64 I've been looking in the PHP files and I haven't found any direct call to zend_hash_find (wich seems to be causing the error). I've been looking at Google but found nothing related. Can somebody please help? Is there any step that I need to accomplish to know more? Thanks a lot, as always!

  Read the article

• C++ Multithreading with pthread is blocking (including sockets)

  - by Sebastian Büttner

  I am trying to implement a multi threaded application with pthread. I did implement a thread class which looks like the following and I call it later twice (or even more), but it seems to block instead of execute the threads parallel. Here is what I got until now: The Thread Class is an abstract class which has the abstract method "exec" which should contain the thread code in a derive class (I did a sample of this, named DerivedThread) Thread.hpp #ifndef THREAD_H_ #define THREAD_H_ #include <pthread.h> class Thread { public: Thread(); void start(); void join(); virtual int exec() = 0; int exit_code(); private: static void* thread_router(void* arg); void exec_thread(); pthread_t pth_; int code_; }; #endif /* THREAD_H_ */ And Thread.cpp #include <iostream> #include "Thread.hpp" /*****************************/ using namespace std; Thread::Thread(): code_(0) { cout << "[Thread] Init" << endl; } void Thread::start() { cout << "[Thread] Created Thread" << endl; pthread_create( &pth_, NULL, Thread::thread_router, reinterpret_cast<void*>(this)); } void Thread::join() { cout << "[Thread] Join Thread" << endl; pthread_join(pth_, NULL); } int Thread::exit_code() { return code_; } void Thread::exec_thread() { cout << "[Thread] Execute" << endl; code_ = exec(); } void* Thread::thread_router(void* arg) { cout << "[Thread] exec_thread function in thread" << endl; reinterpret_cast<Thread*>(arg)->exec_thread(); return NULL; } DerivedThread.hpp #include "Thread.hpp" class DerivedThread : public Thread { public: DerivedThread(); virtual ~DerivedThread(); int exec(); void Close() = 0; DerivedThread.cpp [...] #include "DerivedThread.cpp" [...] int DerivedThread::exec() { //code to be executed do { cout << "Thread executed" << endl; usleep(1000000); } while (true); //dummy, just to let it run for a while } [...] Basically, I am calling this like the here: DerivedThread *thread; cout << "Creating Thread" << endl; thread = new DerivedThread(); cout << "Created thread, starting..." << endl; thread->start(); cout << "Started thread" << endl; cout << "Creating 2nd Thread" << endl; thread = new DerivedThread(); cout << "Created 2nd thread, starting..." << endl; thread->start(); cout << "Started 2nd thread" << endl; What is working great if I am only starting one of these Threads , but if I start multiple which should run together (not synced, only parallel) . But I discovered, that the thread is created, then as it tries to execute it (via start) the problem seems to block until the thread has closed. After that the next Thread is processed. I thought that pthread would do it unblocked for me, so what did I wrong? A sample output might be: Creating Thread [Thread] Thread Init Created thread, starting... [Thread] Created thread [Thread] exec_thread function in thread [Thread] Execute Thread executed Thread executed Thread executed Thread executed Thread executed Thread executed Thread executed .... Until Thread 1 is not terminated, a Thread 2 won't be created not executed. The process above is executed in an other class. Just for the information: I am trying to create a multi threaded server. The concept is like this: MultiThreadedServer Class has a main loop, like this one: ::inet::ServerSock *sock; //just a simple self made wrapper class for sockets DerivedThread *thread; for (;;) { sock = new ::inet::ServerSock(); this->Socket->accept( *sock ); cout << "Creating Thread" << endl; //Threads (according to code sample above) thread = new DerivedThread(sock); //I did not mentoine the parameter before as it was not neccesary, in fact, I pass the socket handle with the connected socket to the thread cout << "Created thread, starting..." << endl; thread->start(); cout << "Started thread" << endl; } So I thought that this would loop over and over and wait for new connections to accept. and when a new client arrives, I am creating a new thread and give the thread the connected socket as a parameter. In the DerivedThread::exec I am doing the handling for the connected client. Like: [...] do { [...] if (this-sock_-read( Buffer, sizeof(PacketStruc) ) 0) { cout << "[Handler_Base] Recv Packet" << endl; //handle the packet } else { Connected = false; } delete Buffer; } while ( Connected ); So I loop in the created thread as long as the client keeps the connection. I think, that the socket may cause the blocking behaviour. Edit: I figured out, that it is not the read() loop in the DerivedThread Class as I simply replaced it with a loop over a simple cout-usleep part. It did also only execute the first one and after first thread finished, the 2nd one was executed. Many thanks and best regards, Sebastian

  Read the article

• something about sql-dump

  - by Yang

  hi, guys, i know that sql dump is a series of insert sql statement which reflects all the records inside the database. but may i know what is it used for? why should we dump the database records? is every database supports dumping function? Any additional background information is welcomed! Thanks in advance!

  Read the article

• appcfg.py: error: no such option: --dump on google-app-engine

  - by zjm1126

  i follow this article :http://code.google.com/intl/en/appengine/docs/python/tools/uploadingdata.html and want to download all data from my app , but when i use the next code,it show error: D:\zjm_demo\app>appcfg.py --dump --app_id=zjm1126 --url=http://zjm1126.appspot.c om/remote_api --filename=a.csv Usage: appcfg.py [options] <action> appcfg.py: error: no such option: --dump why ? thanks

  Read the article

• Tool for analyzing java core dump

  - by margus

  If i make java core dump with gcore then what is the best tool to analyze it? I need to be able make jmap, jstack, jstat etc and also i need to see values of all variables. Something that can take core dump as frozen JVM.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >