Search Results

Search found 205 results on 9 pages for 'unspecified'.

Page 2/9 | < Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >

• Can LINQ-to-SQL omit unspecified columns on insert so a database default value is used?

  - by Todd Ropog

  I have a non-nullable database column which has a default value set. When inserting a row, sometimes a value is specified for the column, sometimes one is not. This works fine in TSQL when the column is omitted. For example, given the following table: CREATE TABLE [dbo].[Table1]( [id] [int] IDENTITY(1,1) NOT NULL, [col1] [nvarchar](50) NOT NULL, [col2] [nvarchar](50) NULL, CONSTRAINT [PK_Table1] PRIMARY KEY CLUSTERED ([id] ASC) ) GO ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [DF_Table1_col1] DEFAULT ('DB default') FOR [col1] The following two statements will work: INSERT INTO Table1 (col1, col2) VALUES ('test value', '') INSERT INTO Table1 (col2) VALUES ('') In the second statement, the default value is used for col1. The problem I have is when using LINQ-to-SQL (L2S) with a table like this. I want to produce the same behavior, but I can't figure out how to make L2S do that. I want to be able to run the following code and have the first row get the value I specify and the second row get the default value from the database: var context = new DataClasses1DataContext(); var row1 = new Table1 { col1 = "test value", col2 = "" }; context.Table1s.InsertOnSubmit(row1); context.SubmitChanges(); var row2 = new Table1 { col2 = "" }; context.Table1s.InsertOnSubmit(row2); context.SubmitChanges(); If the Auto Generated Value property of col1 is False, the first row is created as desired, but the second row fails with a null error on col1. If Auto Generated Value is True, both rows are created with the default value from the database. I've tried various combinations of Auto Generated Value, Auto-Sync and Nullable, but nothing I've tried gives the behavior I want. L2S does not omit the column from the insert statement when no value is specified. Instead it does something like this: INSERT INTO Table1 (col1, col2) VALUES (null, '') ...which of course causes a null error on col1. Is there some way to get L2S to omit a column from the insert statement if no value is given? Or is there some other way to get the behavior I want? I need the default value at the database level because not all row inserts are done via L2S, and in some cases the default value is a little more complex than a hard coded value (e.g. creating the default based on another field) so I'd rather avoid duplicating that logic.

  Read the article

• Howcome some C++ functions with unspecified linkage build with C linkage?

  - by christoffer

  This is something that makes me fairly perplexed. I have a C++ file that implements a set of functions, and a header file that defines prototypes for them. When building with Visual Studio or MingW-gcc, I get linking errors on two of the functions, and adding an 'extern "C"' qualifier resolved the error. How is this possible? Header file, "some_header.h": // Definition of struct DEMO_GLOBAL_DATA omitted DWORD WINAPI ThreadFunction(LPVOID lpData); void WriteLogString(void *pUserData, const char *pString, unsigned long nStringLen); void CheckValid(DEMO_GLOBAL_DATA *pData); int HandleStart(DEMO_GLOBAL_DATA * pDAta, TCHAR * pLogFileName); void HandleEnd(DEMO_GLOBAL_DATA *pData); C++ file, "some_implementation.cpp" #include "some_header.h" DWORD WINAPI ThreadFunction(LPVOID lpData) { /* omitted */ } void WriteLogString(void *pUserData, const char *pString, unsigned long nStringLen) { /* omitted */ } void CheckValid(DEMO_GLOBAL_DATA *pData) { /* omitted */ } int HandleStart(DEMO_GLOBAL_DATA * pDAta, TCHAR * pLogFileName) { /* omitted */ } void HandleEnd(DEMO_GLOBAL_DATA *pData) { /* omitted */ } The implementations compile without warnings, but when linking with the UI code that calls these, I get a normal error LNK2001: unresolved external symbol "int __cdecl HandleStart(struct _DEMO_GLOBAL_DATA *, wchar_t *) error LNK2001: unresolved external symbol "void __cdecl CheckValid(struct _DEMO_MAIN_GLOBAL_DATA * What really confuses me, now, is that only these two functions (HandleStart and CheckValid) seems to be built with C linkage. Explicitly adding "extern 'C'" declarations for only these two resolved the linking error, and the application builds and runs. Adding "extern 'C'" on some other function, such as HandleEnd, introduces a new linking error, so that one is obviously compiled correctly. The implementation file is never modified in any of this, only the prototypes.

  Read the article

• How to break a loop when inputting unspecified raw_input?

  - by user1874510

  I want to write an interface using a while loop and raw_input. My code looks like this: while True: n = raw_input("'p' = pause, 'u' = unpause, 'p' = play 's' = stop, 'q' = quit) if n.strip() == 'p': mp3.pause() if n.strip() == 'u': mp3.unpause() if n.strip() == 'p': mp3.play() if n.strip() == 's': mp3.stop() if n.strip() == 'q': break But I want it to break if I input anything that isn't specified in the raw_input. if not raw_input: break Returns and IndentationError: unindent does not match any outer indentation level. if not raw_input: break Does not return any error but doesn't work as I want it to. As far as I know, it does nothing at all. Also, if there's a cleaner way to write my loop, I love to hear it.

  Read the article

• ssh key error - Permission denied (publickey,gssapi-keyex,gssapi-with-mic)

  - by user1963938

  Amazon Ec2 :: Redhat 6. 64 Bit I'm trying to follow the socks5 guidelines (http://www.catonmat.net/blog/linux-socks5-proxy/ ) to open a socks on one of our servers but unfortunately I got suck at step 1 . ssh -N -D 0.0.0.0:1080 localhost I get error Permission denied (publickey,gssapi-keyex,gssapi-with-mic). How do I fix it ? More debug info ssh -v -f -N -D 0.0.0.0:1080 localhost OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/identity type -1 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_0' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Tumblr custom domain not redirecting properly

  - by Manic

  I decided to host my blog at Tumblr, using their custom domain setup (http://blog.smokingfishgames.com/ instead of http://smokingfishgames.tumblr.com). However, it's been 72 hours and I'm still getting spotty redirection. It works some of the time--I go and see the page and blog, and it's all fine. However, it occasionally just stops working and redirects back to my web host, which is a directory with nothing but a single file called BUGGER.html (which I stuck in to make sure that it was my web host and not some Tumblr empty directory). Clearing the Chrome DNS cache makes the problem go away--for a while. After a few minutes, or an hour, or however long, I'll start seeing BUGGER.html again. I clear the cache, and poof, the blog shows up. The thing that's curious to me is that when I clear the cache and get BUGGER.html again (which happens occasionally), I can look at my Chrome DNS cache and see assets.tumblr.com UNSPECIFIED blog.smokingfishgames.com UNSPECIFIED www.tumblr.com UNSPECIFIED IP addresses and expiration times omitted for brevity's sake--if they're important I'm sure I can replicate the issue. This implies, to me anyway, that my browser is reaching Tumblr but getting bounced back to my web host. Any reason why this would be happening, or is this a normal symptom of DNS propagation? If it is a problem, should I be bothering Tumblr or my host with it, or is this something I can fix myself?

  Read the article

• Error when compiling a WinForms project that uses SubSonic library

  - by Mike Devenney

  The code generation is working but I get the following errors when I try to build the project: Error 4 Source file '...Project Path...\Structs.cs' could not be opened ('Unspecified error ') PPSGenerator Error 5 Source file '...Project Path...\Context.cs' could not be opened ('Unspecified error ') PPSGenerator Error 6 Source file '...Project Path...\ActiveRecord.cs' could not be opened ('Unspecified error ') PPSGenerator Error 7 Source file '...Project Path...\StoredProcedures.cs' could not be opened ('Unspecified error ') PPSGenerator I'm using VS2010 on a Windows 7 64 bit machine. Project is targeting Framework 3.5... any ideas? Also noticed the following warnings, but not sure that these are as important: Warning 1 The C# 2.0 and C# 3.5 compilers are no longer supported. Templates will always be compiled with the version 4 compiler instead of 'v3.5' as specified. ...ProjectPath...\Structs.tt 1 4 Warning 2 Multiple template directives were found in the template. All but the first one will be ignored. Multiple parameters to the template directive should be specified within one template directive. ...ProjectPath...\Settings.ttinclude 1 4 Warning 3 Compiling transformation: The variable 'parameters' is assigned but its value is never used ...ProjectPath...\SQLServer.ttinclude 92 15 Thanks! Mike D

  Read the article

• getaddrinfo appears to return different results between Windows and Ubuntu?

  - by MrDuk

  I have the following two sets of code: Windows #undef UNICODE #include <winsock2.h> #include <ws2tcpip.h> #include <stdio.h> // link with Ws2_32.lib #pragma comment (lib, "Ws2_32.lib") int __cdecl main(int argc, char **argv) { //----------------------------------------- // Declare and initialize variables WSADATA wsaData; int iResult; INT iRetval; DWORD dwRetval; argv[1] = "www.google.com"; argv[2] = "80"; int i = 1; struct addrinfo *result = NULL; struct addrinfo *ptr = NULL; struct addrinfo hints; struct sockaddr_in *sockaddr_ipv4; // struct sockaddr_in6 *sockaddr_ipv6; LPSOCKADDR sockaddr_ip; char ipstringbuffer[46]; DWORD ipbufferlength = 46; /* // Validate the parameters if (argc != 3) { printf("usage: %s <hostname> <servicename>\n", argv[0]); printf("getaddrinfo provides protocol-independent translation\n"); printf(" from an ANSI host name to an IP address\n"); printf("%s example usage\n", argv[0]); printf(" %s www.contoso.com 0\n", argv[0]); return 1; } */ // Initialize Winsock iResult = WSAStartup(MAKEWORD(2, 2), &wsaData); if (iResult != 0) { printf("WSAStartup failed: %d\n", iResult); return 1; } //-------------------------------- // Setup the hints address info structure // which is passed to the getaddrinfo() function ZeroMemory( &hints, sizeof(hints) ); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; // hints.ai_protocol = IPPROTO_TCP; printf("Calling getaddrinfo with following parameters:\n"); printf("\tnodename = %s\n", argv[1]); printf("\tservname (or port) = %s\n\n", argv[2]); //-------------------------------- // Call getaddrinfo(). If the call succeeds, // the result variable will hold a linked list // of addrinfo structures containing response // information dwRetval = getaddrinfo(argv[1], argv[2], &hints, &result); if ( dwRetval != 0 ) { printf("getaddrinfo failed with error: %d\n", dwRetval); WSACleanup(); return 1; } printf("getaddrinfo returned success\n"); // Retrieve each address and print out the hex bytes for(ptr=result; ptr != NULL ;ptr=ptr->ai_next) { printf("getaddrinfo response %d\n", i++); printf("\tFlags: 0x%x\n", ptr->ai_flags); printf("\tFamily: "); switch (ptr->ai_family) { case AF_UNSPEC: printf("Unspecified\n"); break; case AF_INET: printf("AF_INET (IPv4)\n"); sockaddr_ipv4 = (struct sockaddr_in *) ptr->ai_addr; printf("\tIPv4 address %s\n", inet_ntoa(sockaddr_ipv4->sin_addr) ); break; case AF_INET6: printf("AF_INET6 (IPv6)\n"); // the InetNtop function is available on Windows Vista and later // sockaddr_ipv6 = (struct sockaddr_in6 *) ptr->ai_addr; // printf("\tIPv6 address %s\n", // InetNtop(AF_INET6, &sockaddr_ipv6->sin6_addr, ipstringbuffer, 46) ); // We use WSAAddressToString since it is supported on Windows XP and later sockaddr_ip = (LPSOCKADDR) ptr->ai_addr; // The buffer length is changed by each call to WSAAddresstoString // So we need to set it for each iteration through the loop for safety ipbufferlength = 46; iRetval = WSAAddressToString(sockaddr_ip, (DWORD) ptr->ai_addrlen, NULL, ipstringbuffer, &ipbufferlength ); if (iRetval) printf("WSAAddressToString failed with %u\n", WSAGetLastError() ); else printf("\tIPv6 address %s\n", ipstringbuffer); break; case AF_NETBIOS: printf("AF_NETBIOS (NetBIOS)\n"); break; default: printf("Other %ld\n", ptr->ai_family); break; } printf("\tSocket type: "); switch (ptr->ai_socktype) { case 0: printf("Unspecified\n"); break; case SOCK_STREAM: printf("SOCK_STREAM (stream)\n"); break; case SOCK_DGRAM: printf("SOCK_DGRAM (datagram) \n"); break; case SOCK_RAW: printf("SOCK_RAW (raw) \n"); break; case SOCK_RDM: printf("SOCK_RDM (reliable message datagram)\n"); break; case SOCK_SEQPACKET: printf("SOCK_SEQPACKET (pseudo-stream packet)\n"); break; default: printf("Other %ld\n", ptr->ai_socktype); break; } printf("\tProtocol: "); switch (ptr->ai_protocol) { case 0: printf("Unspecified\n"); break; case IPPROTO_TCP: printf("IPPROTO_TCP (TCP)\n"); break; case IPPROTO_UDP: printf("IPPROTO_UDP (UDP) \n"); break; default: printf("Other %ld\n", ptr->ai_protocol); break; } printf("\tLength of this sockaddr: %d\n", ptr->ai_addrlen); printf("\tCanonical name: %s\n", ptr->ai_canonname); } freeaddrinfo(result); WSACleanup(); return 0; } Ubuntu /* ** listener.c -- a datagram sockets "server" demo */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #define MYPORT "4950" // the port users will be connecting to #define MAXBUFLEN 100 // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } int main(void) { int sockfd; struct addrinfo hints, *servinfo, *p; int rv; int numbytes; struct sockaddr_storage their_addr; char buf[MAXBUFLEN]; socklen_t addr_len; char s[INET6_ADDRSTRLEN]; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // set to AF_INET to force IPv4 hints.ai_socktype = SOCK_DGRAM; hints.ai_flags = AI_PASSIVE; // use my IP if ((rv = getaddrinfo(NULL, MYPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and bind to the first we can for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("listener: socket"); continue; } if (bind(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("listener: bind"); continue; } break; } if (p == NULL) { fprintf(stderr, "listener: failed to bind socket\n"); return 2; } freeaddrinfo(servinfo); printf("listener: waiting to recvfrom...\n"); addr_len = sizeof their_addr; if ((numbytes = recvfrom(sockfd, buf, MAXBUFLEN-1 , 0, (struct sockaddr *)&their_addr, &addr_len)) == -1) { perror("recvfrom"); exit(1); } printf("listener: got packet from %s\n", inet_ntop(their_addr.ss_family, get_in_addr((struct sockaddr *)&their_addr), s, sizeof s)); printf("listener: packet is %d bytes long\n", numbytes); buf[numbytes] = '\0'; printf("listener: packet contains \"%s\"\n", buf); close(sockfd); return 0; } When I attempt www.google.com, I don't get the ipv6 socket returned on Windows - why is this? Outputs: (ubuntu) caleb@ub1:~/Documents/dev/cs438/mp0/MP0$ ./a.out www.google.com IP addresses for www.google.com: IPv4: 74.125.228.115 IPv4: 74.125.228.116 IPv4: 74.125.228.112 IPv4: 74.125.228.113 IPv4: 74.125.228.114 IPv6: 2607:f8b0:4004:803::1010 Outputs: (win) Calling getaddrinfo with following parameters: nodename = www.google.com servname (or port) = 80 getaddrinfo returned success getaddrinfo response 1 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.114 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 2 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.115 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 3 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.116 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 4 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.112 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 5 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.113 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null)

  Read the article

• custom helpers inside each block

  - by Unspecified

  myArray = [{name: "name1", age: 20}, {name: "name2", age:22}]; {{#each person in myArray}} {{#myHelper person}} Do something {{/myHelper}} {{/each}} Handlebars.registerHelper(function(context, options){ if(context.age > 18){ return options.fn(this); }else{ return options.inverse(this); } }) In the above code when I tried to debug my custom helper it shows the context="person" while I want the context to be the person object, what's wrong with my code ? I found a similar question here but did not get it either...

  Read the article

• SSH into Fedora 17 will not work with new users

  - by psion

  I just deployed a new Fedora 17 server on the Amazon EC2. I was able to log in as ec2-user with my generated keypair, but I cannot log in under normal circumstances as a user I created. This is just a normal ssh: ssh user@ip-address Any ideas on what is going on here? EDIT: This is a snippit from my sshd_config file # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no #PermitEmptyPasswords no PasswordAuthentication no EDIT AGAIN: This is the output of ssh -v. OpenSSH_5.8p2, OpenSSL 1.0.0i-fips 19 Apr 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 107.23.2.165 [107.23.2.165] port 22. debug1: Connection established. debug1: identity file /home/psion/.ssh/id_rsa type 1 debug1: identity file /home/psion/.ssh/id_rsa-cert type -1 debug1: identity file /home/psion/.ssh/id_dsa type 2 debug1: identity file /home/psion/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 19:cb:84:21:a9:0e:83:96:2f:6a:fa:7d:ce:39:0f:31 debug1: Host '107.23.2.165' is known and matches the RSA host key. debug1: Found key in /home/psion/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering DSA public key: /home/psion/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Offering RSA public key: /home/psion/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Passwordless ssh failed when login using username

  - by Aczire

  I was trying to setup Hadoop and was stumbled on passwordless ssh to localhost. I am getting a password prompt when trying to connect using ssh username@hostname format. But there is no problem connecting to the machine like ssh localhost or ssh hostname.com. Tried ssh-copy-id user@hostname but it did not work. Using CentOS 6.3 as normal user, I neither have root access or am a sudoer so editing any files like sshd_config is not possible (not even cat the sshd_config file contents). I hope the user login is possible since I can do login without password to localhost, right? Please advise, Here is the ssh debug output. [[email protected] ~]$ ssh -v [email protected] OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to hostname.com [::1] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/identity type -1 debug1: identity file /home/user/.ssh/id_rsa type -1 debug1: identity file /home/user/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering public key: /home/user/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 434 Agent admitted failure to sign using the key. debug1: Trying private key: /home/user/.ssh/identity debug1: Trying private key: /home/user/.ssh/id_rsa debug1: Next authentication method: password [email protected]'s password:

  Read the article

• ssh refuses to authenticate keys

  - by MixturaDementiae

  So I am setting up a connection between my machine [fedora 17] and a virtual machine running in Virtual Box in which is running CentOS 5. I have installed openssh from the repositories on CentOS, and I have configured everything as it follows: Protocol 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key SyslogFacility AUTHPRIV PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile /home/pigreco/.ssh/authorized_keys PasswordAuthentication no ChallengeResponseAuthentication yes GSSAPIAuthentication yes GSSAPICleanupCredentials yes UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE AcceptEnv XMODIFIERS X11Forwarding yes Subsystem sftp /usr/libexec/openssh/sftp-server this is the configuration file sshd_config on the server i.e. on the CentOS. Moreover I have created a public/private key pair as usual on the .ssh/ folder in my home directory in my OS, i.e. Fedora, and then I've copied with scp the id_rsa.pub to the server and then I have appended its content to the file .ssh/authorized_keys on the server machine. The error that I get is the following: OpenSSH_5.9p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 50: Applying options for * debug1: Connecting to 192.168.100.13 [192.168.100.13] port 22. debug1: Connection established. debug1: identity file /home/mayhem/.ssh/identity type -1 debug1: identity file /home/mayhem/.ssh/identity-cert type -1 debug1: identity file /home/mayhem/.ssh/id_rsa type 1 debug1: identity file /home/mayhem/.ssh/id_rsa-cert type -1 debug1: identity file /home/mayhem/.ssh/id_dsa type -1 debug1: identity file /home/mayhem/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 16:e5:72:d1:37:94:1b:5e:3d:3a:e5:da:6f:df:0c:08 debug1: Host '192.168.100.13' is known and matches the RSA host key. debug1: Found key in /home/mayhem/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/mayhem/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 279 Agent admitted failure to sign using the key. debug1: Trying private key: /home/mayhem/.ssh/identity debug1: Trying private key: /home/mayhem/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Do you have some good suggestion of what I can do? thank you

  Read the article

• SSH hangs without password prompt

  - by Wilco

  Just reinstalled OS X and for some reason I now cannot connect to a specific machine on my local network via SSH. I can SSH to other machines on the network without any problems, and other machines can SSH to the problematic one as well. I'm not sure where to start looking for problems - can anyone point me in the right direction? Here's a dump of a connection attempt: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 10.0.1.7 [10.0.1.7] port 22. debug1: Connection established. debug1: identity file /Users/nwilliams/.ssh/identity type -1 debug1: identity file /Users/nwilliams/.ssh/id_rsa type -1 debug1: identity file /Users/nwilliams/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5 debug1: match: OpenSSH_4.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '10.0.1.7' is known and matches the RSA host key. debug1: Found key in /Users/nwilliams/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic ... at this point it hangs for quite a while, and then resumes ... debug1: Unspecified GSS failure. Minor code may provide more information Server not found in Kerberos database debug1: Unspecified GSS failure. Minor code may provide more information Server not found in Kerberos database debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Trying private key: /Users/nwilliams/.ssh/identity debug1: Trying private key: /Users/nwilliams/.ssh/id_rsa debug1: Trying private key: /Users/nwilliams/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive

  Read the article

• ssh - "Connection closed by xxx.xxx.xxx.xxx" - using password

  - by Michael B

  I attempted to create an new user account that I wish to use to log in using ssh. I did this (in CentOs): /usr/sbin/adduser -d /home/testaccount -s /bin/bash user passwd testaccount This is the error I receive when trying to log in via ssh: ~/.ssh$ ssh -v [email protected] OpenSSH_5.1p1 Debian-5ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/identity type -1 debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'xxx.xxx.xxx.xxx' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:8 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information No credentials cache found debug1: Unspecified GSS failure. Minor code may provide more information No credentials cache found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering public key: /home/user/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /home/user/.ssh/identity debug1: Trying private key: /home/user/.ssh/id_dsa debug1: Next authentication method: password testaccount@xxx's password: Connection closed by xxx.xxx.xxx.xxx The "connection closed" message appeared immediately after entering the password (if I enter the wrong password it waits and then prompts for another password) I am able to log in from the same computer using other accounts that had been setup previously. When logged into the remote machine I am able to do 'su testaccount' Thanks for your time.

  Read the article

• SQL Server 2012 Maintenance Plan can't modify

  - by Crazyd

  Click on any created Maintenance Plan: TITLE: Microsoft SQL Server Management Studio Value cannot be null. Parameter name: component (System.Design) BUTTONS:OK Create a new Plan I get this error: TITLE: Maintenance Plan Wizard Progress Saving maintenance plan failed. ADDITIONAL INFORMATION: The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Unspecified error). The SQL statement that was issued has failed. The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Unspecified error). The SQL statement that was issued has failed. BUTTONS:OK Edit an already created Backup Plan: Error 1 Error loading 'BackupDb' : The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Unspecified error). The SQL statement that was issued has failed. . server=SERVER;package=Maintenance Plans\BackupLeadsDb; 1 1 Attemped Solutions: I've changed password for SA Account; I use Windows Authentication to log in; and I've registered C:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTS.dll. Repair SQL Server 2012, Uninstall/ReInstall SQL Server 2012.

  Read the article

• EC2 SSH access from fedora

  - by Randika Rathugama

  I'm trying to connect to existing instance of EC2 with a new PEM. But I get this error when I try to connect. Here is what I did so far. I created the PEM on EC2 and saved it to ~/.ssh/my-fedora.pem and ran this command; is there anything else I should do? [randika@localhost ~]$ ssh -v -i ~/.ssh/my-fedora.pem [email protected] OpenSSH_5.3p1, OpenSSL 1.0.0-fips-beta4 10 Nov 2009 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to ec2-xx-xxx-xxx-xx.compute-1.amazonaws.com [xx-xx-xx-xx] port 22. debug1: Connection established. debug1: identity file /home/randika/.ssh/saberion-fedora.pem type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.7 debug1: match: OpenSSH_4.7 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'ec2-xx-xxx-xxx-xx.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/randika/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering public key: [email protected] debug1: Authentications that can continue: publickey,gssapi-with-mic debug1: Offering public key: [email protected] debug1: Authentications that can continue: publickey,gssapi-with-mic debug1: Trying private key: /home/randika/.ssh/saberion-fedora.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-with-mic).

  Read the article

• Unable to call through asterisk

  - by sk

  I want to create a voip service. I have installed asterisk-1.4 on a dedicated remotely hosted debian lenny distro. I made a sip.conf and extensions.conf so as to place a call between two sip phones(i am using xlite 3.0) installed in some other Windows PC. Whenever i switch this phones the asterisk console shows that Registration from '"1000"<sip:[email protected]>' failed for '122.168.10.254' - Peer is not supposed to register Where xx.xx.xx.xx is the server's IP. i.e my sip phones are unable to register with the asterisk server. Please help me to place call between two sip phones #sip show peers Name/username Host Dyn Nat ACL Port Status 2000 (Unspecified) D 0 Unmonitored 1000 (Unspecified) D 0 Unmonitored 2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 2 offline] # sip show registry Host Username Refresh State Reg.Time # sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 0 active SIP channels

  Read the article

• Design of input files reading when it comes to defaults/transformations

  - by Stefano Borini

  Suppose you have an application that reads an input file, on a language that does not support the concept of None. The input is read, parsed, and the contents are stored on a structure for later use. Now, in general you want to keep into account transformation of the data from the input, such as adding default values when not specified, or adding full path information to relative path specified in the input. There are two different strategies to achieve this. The first strategy is to perform these transformations at input file reading time. In practice, you put all the intelligence into the input parser, and your application has no logic to deal with unexpected circumstances, such as an unspecified value. You lose the information of what was specified and what wasn't, but you gain in black-boxing the details. Your "running code" needs that information in any case and in a proper form, and is not concerned if it's the default or a user-specified information. The second strategy is to have the file reader a real one-to-one mapper from the file to a memory-stored object, with no intelligent behavior. unspecified values are not filled (which may however be a problem in languages not supporting None) and data is stored verbatim from the file. The intelligence for recovery must now go into the "running code", which must check what was specified in the file, eventually fall back to a default, or modify the input properly before using it. I would like to know your opinion on these two approaches, and in particular which one you found the most frequently implemented.

  Read the article

• Long-term Freelance contract: should it have a salary-day or not?

  - by otto

  I don't like to speak about money. I just like to work. I still believe in a relationship between good work and good compensation. Hence I don't want ask my employer about my compensations, actually they are asking me. So I created a liberal contract with unspecified salary-day -- I did not want to lose my rights to my own projects and I did not pay any attention to the salary-day. Now the firm said that they would have paid me 1 month earlier if I had provided a tax -paper. I provided it before the next payment -day (unspecified). During the next month, the co-employer pretty much blocks my working -- does not allow me to access working repository and the co-employer goes to cruise when we should finalize a project so I cannot do anything. Now the project is not finalized, the co-employer has apparently provided some false statements to the boss about my doings (not getting anything for one month's work and 1 month when the co-employer pretty much wasted just my time) -- I was only allowed to debug the code of my co-employer and not to do anything. I feel that co-employer did not allow me to work by purpose so that they have an excuse not to pay any salary. The co-employer says that I cannot speak to the boss. The boss say that I need to speak directly to co-employer, not to him. I haven't said anything about the situation. I did not get things done because I was not allowed and now I am not even allowed to speak. Boss is the person who pays salaries. But both boss and co-employer have stages in the firm -- I think co-employer and boss are the same person pretty much, they created a theatre so that they get almost 2 month's work for free. Now I have multiple ideas how to avoid this kind of situations in the future: specify the salary day make sure you can speak directly to the manager and the boss, not through middle-hand other?

  Read the article

• wget has a 4 second delay

  - by guisius

  Hello. I have tried to wget a page with windows/mac, and the response is instant while the linux vesion needs to wait for 4 seconds before it shows the response. I just hope this can be solved. More information added: in Ubuntu : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:21:17-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:21:22 (1.88 MB/s) - `test.txt' saved [17] while in Mac OS : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:22:33-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:22:33 (755 KB/s) - `test.txt' saved [17] in ubuntu it delays 4 seconds while windows and mac will not i believe it may related to some setting in the network config such as packet size , window frame , but i have no idea to set this PS: because the limit of the post not allow to post the url so i mark this as xxx

  Read the article

• Bubble chart with X and Y labels of string type [closed]

  - by MrGenius

  I have a scenario where I need to display how many males, females and Unspecified are there from City1, City2, City3, etc. I am trying to use bubble chart for this. So I want to display this chart with y axis showing Male, Female and Unspecified as Y axis labels and City1, City2,City3 as X axis labels. The actual count being displayed as a square bubble on the chart. This is little urgent. I could not locate any similar sample on MS documentation too. Edit: How to use the bubble chart to display genders on the y axis and cities on the x axis?

  Read the article

• IE 8 specifying background-color changes element behavior

  - by Mateo

  I have an absolutely positioned div on which I am trying to trigger mouseenter and mouseleave events. In IE8/7 with the background-color of the div left unspecified (so that it defaults to transparent), the mouseenter/leave events are not firing when the cursor crosses the div's boundary, only somewhere in the middle of the div and when the cursor is over any text within the div. When I attempt to debug the problem by adding a background color to the div (e.g. background-color: green), the problem magically goes away. The div's box model is honored perfectly and mouseenter/leave fire as when expected. It's only when the div's background color is left unspecified (or even explicitly set to transparent) that it doesn't behave correctly. Any ideas? Googling for this IE bug/quirk is coming up with nothing.

  Read the article

• Why does C++ mandate that complex only be instantiated for float, double, or long double?

  - by templatetypedef

  According to the C++ ISO spec, §26.2/2: The effect of instantiating the template complex for any type other than float, double or long double is unspecified. Why would the standard authors explicitly add this restriction? This makes it unspecified, for example, what happens if you make complex<int> or a complex<MyCustomFixedPointType> and seems like an artificial restriction. Is there a reason for this limitation? Is there a workaround if you want to instantiate complex with your own custom type? I'm primarily asking this question because of this earlier question, in which the OP was confused as to why abs was giving bizarre outputs for complex<int>. That said, this still doesn't quite make sense given that we also might want to make complex numbers out of fixed-points types, higher-precision real numbers, etc. Thanks!

  Read the article

• Python .app doesn't read .txt file like it should

  - by Bambo

  This question relates to this one: Python app which reads and writes into its current working directory as a .app/exe i got the path to the .txt file fine however now when i try to open it and read the contents it seems that it doesn't extract the data properly. Here's my code - http://pastie.org/4876896 These are the errors i'm getting: 30/09/2012 10:28:49.103 [0x0-0x4e04e].org.pythonmac.unspecified.main: for index, item in enumerate( lines ): # iterate through lines 30/09/2012 10:28:49.103 [0x0-0x4e04e].org.pythonmac.unspecified.main: TypeError: 'NoneType' object is not iterable I kind of understand what the errors mean however i'm not sure why they are being flagged up because if i run my script with it not in a .app form it doesn't get these errors and extracts the data fine.

  Read the article

• AuthnRequest Settings in OIF / SP

  - by Damien Carru

  In this article, I will list the various OIF/SP settings that affect how an AuthnRequest message is created in OIF in a Federation SSO flow. The AuthnRequest message is used by an SP to start a Federation SSO operation and to indicate to the IdP how the operation should be executed: How the user should be challenged at the IdP Whether or not the user should be challenged at the IdP, even if a session already exists at the IdP for this user Which NameID format should be requested in the SAML Assertion Which binding (Artifact or HTTP-POST) should be requested from the IdP to send the Assertion Which profile should be used by OIF/SP to send the AuthnRequest message Enjoy the reading! Protocols The SAML 2.0, SAML 1.1 and OpenID 2.0 protocols define different message elements and rules that allow an administrator to influence the Federation SSO flows in different manners, when the SP triggers an SSO operation: SAML 2.0 allows extensive customization via the AuthnRequest message SAML 1.1 does not allow any customization, since the specifications do not define an authentication request message OpenID 2.0 allows for some customization, mainly via the OpenID 2.0 extensions such as PAPE or UI SAML 2.0 OIF/SP allows the customization of the SAML 2.0 AuthnRequest message for the following elements: ForceAuthn: Boolean indicating whether or not the IdP should force the user for re-authentication, even if the user has still a valid session By default set to false IsPassive Boolean indicating whether or not the IdP is allowed to interact with the user as part of the Federation SSO operation. If false, the Federation SSO operation might result in a failure with the NoPassive error code, because the IdP will not have been able to identify the user By default set to false RequestedAuthnContext Element indicating how the user should be challenged at the IdP If the SP requests a Federation Authentication Method unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the NoAuthnContext error code By default missing NameIDPolicy Element indicating which NameID format the IdP should include in the SAML Assertion If the SP requests a NameID format unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the InvalidNameIDPolicy error code If missing, the IdP will generally use the default NameID format configured for this SP partner at the IdP By default missing ProtocolBinding Element indicating which SAML binding should be used by the IdP to redirect the user to the SP with the SAML Assertion Set to Artifact or HTTP-POST By default set to HTTP-POST OIF/SP also allows the administrator to configure the server to: Set which binding should be used by OIF/SP to redirect the user to the IdP with the SAML 2.0 AuthnRequest message: Redirect or HTTP-POST By default set to Redirect Set which binding should be used by OIF/SP to redirect the user to the IdP during logout with SAML 2.0 Logout messages: Redirect or HTTP-POST By default set to Redirect SAML 1.1 The SAML 1.1 specifications do not define a message for the SP to send to the IdP when a Federation SSO operation is started. As such, there is no capability to configure OIF/SP on how to affect the start of the Federation SSO flow. OpenID 2.0 OpenID 2.0 defines several extensions that can be used by the SP/RP to affect how the Federation SSO operation will take place: OpenID request: mode: String indicating if the IdP/OP can visually interact with the user checkid_immediate does not allow the IdP/OP to interact with the user checkid_setup allows user interaction By default set to checkid_setup PAPE Extension: max_auth_age : Integer indicating in seconds the maximum amount of time since when the user authenticated at the IdP. If MaxAuthnAge is bigger that the time since when the user last authenticated at the IdP, then the user must be re-challenged. OIF/SP will set this attribute to 0 if the administrator configured ForceAuthn to true, otherwise this attribute won't be set Default missing preferred_auth_policies Contains a Federation Authentication Method Element indicating how the user should be challenged at the IdP By default missing Only specified in the OpenID request if the IdP/OP supports PAPE in XRDS, if OpenID discovery is used. UI Extension Popup mode Boolean indicating the popup mode is enabled for the Federation SSO By default missing Language Preference String containing the preferred language, set based on the browser's language preferences. By default missing Icon: Boolean indicating if the icon feature is enabled. In that case, the IdP/OP would look at the SP/RP XRDS to determine how to retrieve the icon By default missing Only specified in the OpenID request if the IdP/OP supports UI Extenstion in XRDS, if OpenID discovery is used. ForceAuthn and IsPassive WLST Command OIF/SP provides the WLST configureIdPAuthnRequest() command to set: ForceAuthn as a boolean: In a SAML 2.0 AuthnRequest, the ForceAuthn field will be set to true or false In an OpenID 2.0 request, if ForceAuthn in the configuration was set to true, then the max_auth_age field of the PAPE request will be set to 0, otherwise, max_auth_age won't be set IsPassive as a boolean: In a SAML 2.0 AuthnRequest, the IsPassive field will be set to true or false In an OpenID 2.0 request, if IsPassive in the configuration was set to true, then the mode field of the OpenID request will be set to checkid_immediate, otherwise set to checkid_setup Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will require the IdP to re-challenge the user, even if the user is already authenticated: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command:configureIdPAuthnRequest(partner="AcmeIdP", forceAuthn="true") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="true" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> To display or delete the ForceAuthn/IsPassive settings, perform the following operatons: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command: To display the ForceAuthn/IsPassive settings on the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", displayOnly="true") To delete the ForceAuthn/IsPassive settings from the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", delete="true") Exit the WLST environment:exit() Requested Fed Authn Method In my earlier "Fed Authentication Method Requests in OIF / SP" article, I discussed how OIF/SP could be configured to request a specific Federation Authentication Method from the IdP when starting a Federation SSO operation, by setting elements in the SSO request message. WLST Command The OIF WLST commands that can be used are: setIdPPartnerProfileRequestAuthnMethod() which will configure the requested Federation Authentication Method in a specific IdP Partner Profile, and accepts the following parameters: partnerProfile: name of the IdP Partner Profile authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it setIdPPartnerRequestAuthnMethod() which will configure the specified IdP Partner entry with the requested Federation Authentication Method, and accepts the following parameters: partner: name of the IdP Partner authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it This applies to SAML 2.0 and OpenID 2.0 protocols. See the "Fed Authentication Method Requests in OIF / SP" article for more information. Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will request the IdP to use a mechanism mapped to the urn:oasis:names:tc:SAML:2.0:ac:classes:X509 Federation Authentication Method to authenticate the user: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerRequestAuthnMethod() command:setIdPPartnerRequestAuthnMethod("AcmeIdP", "urn:oasis:names:tc:SAML:2.0:ac:classes:X509") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/>   <samlp:RequestedAuthnContext Comparison="minimum">      <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">         urn:oasis:names:tc:SAML:2.0:ac:classes:X509      </saml:AuthnContextClassRef>   </samlp:RequestedAuthnContext></samlp:AuthnRequest> NameID Format The SAML 2.0 protocol allows for the SP to request from the IdP a specific NameID format to be used when the Assertion is issued by the IdP. Note: SAML 1.1 and OpenID 2.0 do not provide such a mechanism Configuring OIF The administrator can configure OIF/SP to request a NameID format in the SAML 2.0 AuthnRequest via: The OAM Administration Console, in the IdP Partner entry The OIF WLST setIdPPartnerNameIDFormat() command that will modify the IdP Partner configuration OAM Administration Console To configure the requested NameID format via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify In the Authentication Request NameID Format dropdown box with one of the values None The NameID format will be set Default Email Address The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress X.509 Subject The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName Windows Name Qualifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName Kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos Transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient Unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified Custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format Persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent I selected Email Address in this example Save WLST Command To configure the requested NameID format via the OIF WLST setIdPPartnerNameIDFormat() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerNameIDFormat() command:setIdPPartnerNameIDFormat("PARTNER", "FORMAT", customFormat="CUSTOM") Replace PARTNER with the IdP Partner name Replace FORMAT with one of the following: orafed-none The NameID format will be set Default orafed-emailaddress The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress orafed-x509 The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName orafed-windowsnamequalifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName orafed-kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos orafed-transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient orafed-unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified orafed-custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format orafed-persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent customFormat will need to be set if the FORMAT is set to orafed-custom An example would be:setIdPPartnerNameIDFormat("AcmeIdP", "orafed-emailaddress") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> After the changes performed either via the OAM Administration Console or via the OIF WLST setIdPPartnerNameIDFormat() command where Email Address would be requested as the NameID Format, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="false" IsPassive="false" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy Format="urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress" AllowCreate="true"/></samlp:AuthnRequest> Protocol Binding The SAML 2.0 specifications define a way for the SP to request which binding should be used by the IdP to redirect the user to the SP with the SAML 2.0 Assertion: the ProtocolBinding attribute indicates the binding the IdP should use. It is set to: Either urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST for HTTP-POST Or urn:oasis:names:tc:SAML:2.0:bindings:Artifact for Artifact The SAML 2.0 specifications also define different ways to redirect the user from the SP to the IdP with the SAML 2.0 AuthnRequest message, as the SP can send the message: Either via HTTP Redirect Or HTTP POST (Other bindings can theoretically be used such as Artifact, but these are not used in practice) Configuring OIF OIF can be configured: Via the OAM Administration Console or the OIF WLST configureSAMLBinding() command to set the Assertion Response binding to be used Via the OIF WLST configureSAMLBinding() command to indicate how the SAML AuthnRequest message should be sent Note: the binding for sending the SAML 2.0 AuthnRequest message will also be used to send the SAML 2.0 LogoutRequest and LogoutResponse messages. OAM Administration Console To configure the SSO Response/Assertion Binding via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify Check the "HTTP POST SSO Response Binding" box to request the IdP to return the SSO Response via HTTP POST, otherwise uncheck it to request artifact Save WLST Command To configure the SSO Response/Assertion Binding as well as the AuthnRequest Binding via the OIF WLST configureSAMLBinding() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureSAMLBinding() command:configureSAMLBinding("PARTNER", "PARTNER_TYPE", binding, ssoResponseBinding="httppost") Replace PARTNER with the Partner name Replace PARTNER_TYPE with the Partner type (idp or sp) Replace binding with the binding to be used to send the AuthnRequest and LogoutRequest/LogoutResponse messages (should be httpredirect in most case; default) httppost for HTTP-POST binding httpredirect for HTTP-Redirect binding Specify optionally ssoResponseBinding to indicate how the SSO Assertion should be sent back httppost for HTTP-POST binding artifactfor for Artifact binding An example would be:configureSAMLBinding("AcmeIdP", "idp", "httpredirect", ssoResponseBinding="httppost") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration which requests HTTP-POST from the IdP to send the SSO Assertion. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso">   <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer>   <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> In the next article, I will cover the various crypto configuration properties in OIF that are used to affect the Federation SSO exchanges.Cheers,Damien Carru

  Read the article

• Code Trivia #5

  - by João Angelo

  A quick one inspired by real life broken code. What’s wrong in this piece of code? class Planet { public Planet() { this.Initialize(); } public Planet(string name) : this() { this.Name = name; } private string name = "Unspecified"; public string Name { get { return name; } set { name = value; } } private void Initialize() { Console.Write("Planet {0} initialized.", this.Name); } }

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >