Search Results

Search found 6605 results on 265 pages for 'complex networks'.

Page 20/265 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• NSArray vs. SQLite for Complex Queries on iPhone

  - by GingerBreadMane

  Developing for iPhone, I have a collection of points that I need to make complex queries on. For example: "How many points have a y-coordinate of 10" and "Return all points with an X-coordinate between 3 and 5 and a y-coordinate of 7". Currently, I am just cycling through each element of an NSArray and checking to see if each element matches my query. It's a pain to write the queries though. SQLite would be much nicer. I'm not sure which would be more efficient though since a SQLite database resides on disk and not in memory (to my understanding). Would SQLite be as efficient or more efficient here? Or is there a better way to do it other than these methods that I haven't thought of? I would need to perform the multiple queries with multiple sets of points thousands of times, so the best performance is important.

  Read the article

• Nhibernate Complex Type binding

  - by user329983

  I have two oracle user defined types: Audit_Type – A normal object with two fields a string and a number Audit_Table_Type – A table of audit_types, (an array) I have a stored procedure that takes as a parameter an Audit_Table_Type. List<Audit_Type> table = new List<Audit_Type>(); var query = session.CreateSQLQuery("call Audit_Rows(Audit_Table_Type(:table))") .SetParameterList("table", table, NHibernateUtil.Custom(typeof(AuditTypeUDT))) This is what I did intuativly created the ICompositeType and just set in a list of them in but this gives me nothing close to what I wanted. I couldn’t figure out how to bind to a table at all. I have built the inline sql that would do this for me but it would destroy my shared pool (not using binds). So a General question how do I bind to complex/composite types using Nhibernate?

  Read the article

• SQL Syntax for Complex Scenario (Deals)

  - by Yisman

  hello everyone i have a complex query to be written but cannot figure it out here are my tables Sales --one row for each sale made in the system SaleProducts --one row for each line in the invoice (similar to OrderDetails in NW) Deals --a list of possible deals/offers that a sale may be entitled to DealProducts --a list of quantities of products that must be purchased in order to get a deal now im trying to make a query which will tell me for each sale which deals he may get the relevant fields are: Sales: SaleID (PK) SaleProducts: SaleID (FK), ProductID (FK) Deals: DealID (PK) DealProducts: DealID(FK), ProductID(FK), Mandatories (int) for required qty i believe that i should be able to use some sort of cross join or outer join, but it aint working here is one sample (of about 30 things i tried) SELECT DealProducts.DealID, DealProducts.ProductID, DealProducts.Mandatories, viwSaleProductCount.SaleID, viwSaleProductCount.ProductCount FROM DealProducts LEFT OUTER JOIN viwSaleProductCount ON DealProducts.ProductID = viwSaleProductCount.ProductID GROUP BY DealProducts.DealID, DealProducts.ProductID, DealProducts.Mandatories, viwSaleProductCount.SaleID, viwSaleProductCount.ProductCount the problem is that it doesnt show any product deals that r not fullfiled (probably because of the productid join). i need that also sales that dont have the requiremnets show up, then i can filter out any saleid that exists in this query "where AmountBought thank you for your help

  Read the article

• Searching for a complex and well-designed PHP OOP application to learn from

  - by Raveren

  Basically, I am diving ever deeper into complex programming practices. I've almost no friends that are experienced (or more experienced than me) programmers to learn from, so I am looking for the next best thing - learning from the work of strangers. Can anyone recommend a real world finished and working application written well and OOP-centered. I'd like to take and analyze its source. Bonus if it's based on Zend Framework. What I am interested most in is objects that unlike desktop applications, have only one real operation done to them (or to their representation in DB or session) during their lifetime (or pageload), like user-logIn(). I'm interested in optimal and reusable design patterns and their real life implementations.

  Read the article

• Entering Complex Data into Access

  - by DataMakesMeCrazy

  Fairly new to Access and trying to do something that seems simple, but may be very complex. I want to create a database of projects, each project has several phases (ie proposal, marketing, etc) and that will allow for multiple employees to work on a single project. Ie Bob and John are working on project number 102. From here, i would like to enter the forecasted start and end dates for each phase of the project, and enter the forecasted number our hours each employee will be allowed to work on that phase of that project ie. Project - Employee - Phase - Start - End - (list weeks) 102 - Bob - Marketing - 12-May-10 - 21-May-10 - 3 - 5 (3 hours first week, 5 hours the second) and so on Basically would all this data be on one table, or several? And can access dynamically show the weeks between the start and end date so that i can input the hours? I feel this database will become severely complicated :S Thanks, J

  Read the article

• Complex nib is slow to load

  - by Dan Ray

  I'm looking for advice about a nib that's very slow to load. It's big and complex, with lots of subviews and doodads. When I fire my UINavController to push it, it's noticeably laggy (maybe almost a second) on my 3G. It sits there with the table cell selected and nothing else happening for long enough to make you wonder if it's broken. I wonder about pre-loading it in another thread while the user is on the previous view. I could probably fire the selector in the background with a delay in the previous view's viewDidAppear, and then keep it in a property until push time comes. Thoughts?

  Read the article

• How to insert complex strings into Actionscript?

  - by Ole Jak

  How to insert complex strings into Actionscript? So I have a string -vvv -I rc w:// v dv s="60x40" --ut="#scode{vcode=FV1,acode=p3,ab=128,ch=2,rate=4400}:dup{dt=st{ac=http{mime=v/x-flv},mux=mpeg{v},dt=:80/sm.fv}}" How to insert it into code like public var SuperPuperComplexString:String = new String(); SuperPuperComplexString = TO_THAT_COMPLEX_STRING; That string has so many problems like some cart of it can happen to be like regexp BUTI DO NOT want it to be parsed as any kind of reg exp - I need It AS IT IS!) How to put that strange string into variable (put it not inputing it thru UI - hardcode it into AS code)?

  Read the article

• Writing complex records to file

  - by DrSobhani

  Hi I have defined some records in my project which may be consisted of other records and also dynamic arrays of normal data types and other records , it is n example of a record type Type1=record x:integer; end; Type2=record Y:array of X; str:string; end; When I tried to save one of variables of these records type to file with blockwrite function like this : var Temp1:Type2; begin setlength(temp1.y,100); blockwrite(MyFile,Temp1,sizeOf(Temp1); it just wrote as much as the size of pure record is ,but temp1 has a dynmic arrays which is resized , Could someone please tell me how I can write a complex record to a file , I mean something like what is used in VB6 . Thanks

  Read the article

• Dynamically generate Triangle Lists for a Complex 3D Mesh

  - by Vulcan Eager

  In my application, I have the shape and dimensions of a complex 3D solid (say a Cylinder Block) taken from user input. I need to construct vertex and index buffers for it. Since the dimensions are taken from user input, I cannot user Blender or 3D Max to manually create my model. What is the textbook method to dynamically generate such a mesh? Edit: I am looking for something that will generate the triangles given the vertices, edges and holes. Something like TetGen. As for TetGen itself, I have no way of excluding the triangles which fall on the interior of the solid/mesh.

  Read the article

• Access: Expression too complex to be evaluated

  - by user2502964

  I'm trying to sort out values from a database by the weekending date. The script I'm using functions on 6 of my 7 databases (they are all constructed identically). The 7th database doesn't function. I get the expression too complex error. any help figuring out why?? Here is my code: SELECT UPC_Test.Type, UPC_Test.[Model No], UPC_Test.[Model Desc], UPC_Test.[Serial No], Format(DateValue([UPC_Test].[Test Date]+7-Weekday([UPC_Test].[Test Date],0)),"m/d/yyyy") AS [Test Date], UPC_Test.Parameter, UPC_Test.[Failure Symptom], UPC_Test.[Repair Action], UPC_Test.[Factory Select], UPC_Test.[Test Station] FROM UPC_Test GROUP BY UPC_Test.Type, UPC_Test.[Model No], UPC_Test.[Model Desc], UPC_Test.[Serial No], Format(DateValue([UPC_Test].[Test Date]+7-Weekday([UPC_Test].[Test Date],0)),"m/d/yyyy"), UPC_Test.Parameter, UPC_Test.[Failure Symptom], UPC_Test.[Repair Action], UPC_Test.[Factory Select], UPC_Test.[Test Station] HAVING (((UPC_Test.Type)="Production") AND ((Format(DateValue([UPC_Test].[Test Date]+7-Weekday([UPC_Test].[Test Date],0)),"m/d/yyyy"))=[Enter]) AND ((UPC_Test.[Failure Symptom])<>"") AND ((UPC_Test.[Repair Action])<>"") AND ((UPC_Test.[Test Station])="UPC RF Test")) ORDER BY Format(DateValue([UPC_Test].[Test Date]+7-Weekday([UPC_Test].[Test Date],0)),"m/d/yyyy");

  Read the article

• Complex class using PHP soapserver mapclass

  - by user559343

  Hi all, I need to create a server for processing SOAP requests. I have the wsdl and xml specifications, but I have a doubt: the xml elements are pretty complex, they are not simple type, but they have parent/child relationships (e.g. I have a Book class with an author subclass). How can I map this to PHP classes? In this example, should I create an author class i.e.: class Author { public $name; public $surname; } and then class Book { public $author; } will $author be a class of type Author? Or a typed array? Any help will be appreciated Thanks and happy new year!

  Read the article

• Need help with some complex SQL query

  - by Psyche

  Hello guys, I need some help with a complex SQL query. Here's my setup: there are two tables, one with authors, and another with books. The books table contains a field named "author" which holds author's id. If a book has more than one author, then the "author" field will contain all the authors ids separated by ";" (something like 2;34;234). On the website I have to list all the books written by an author. If there's only one author, its simple, but how can I get those books where the author I'm interested in is the second or third author? Many thanks.

  Read the article

• How to modify complex argument strings in Perl

  - by mmccoo

  I have a cmdline that I'm trying to modify to remove some of the arguments. What makes this complex is that I can have nested arguments. Say that I have this: $cmdline = "-a -xyz -a- -b -xyz -b- -a -xyz -a-" I have three different -xyz flags that are to be interpreted in two different contexts. One is the -a context and the other is the -b context. I want to remove the "a" -xyz's but leave the ones in the "b" -xyz. How can I most effectively do this in Perl?

  Read the article

• Need an efficient algorithm solve this kind of complex structure

  - by Rizvan

  Problem Statement is : Given 2 Dimensional array, print output for example If 4 rows and 6 columns, output would be: 1 2 3 4 5 6 16 17 18 19 20 7 15 24 23 22 21 8 14 13 12 11 10 9 I tried it is looking like square within square but when I attempted this problem, I put so many while and if loops but didn't got exact answer. If row and columns increases how to handle it? This is not homework. I was learning solving complex structure so I need to understand it by some guidance.

  Read the article

• Complex SQL queries (DELETE)?

  - by Joe

  Hello all, I'm working with three tables, and for simplicity's sake let's call them table A, B, and C. Both tables A and B have a column called id, as well as one other column, Aattribute and Battribute, respectively. Column c also has an id column, and two other columns which hold values for A.id and B.id. Now, in my code, I have easy access to values for both Aattribute and Battribute, and want to delete the row at C, so effectively I want to do something like this: DELETE FROM C WHERE aid=(SELECT id FROM A WHERE Aattribute='myvalue') AND bid=(SELECT id FROM B WHERE Battribute='myothervalue') But this obviously doesn't work. Is there any way to make a single complex query, or do I have to run three queries, where I first get the value of A.id using a SELECT with 'myvalue', then the same for B.id, then use those in the final query? [Edit: it's not letting me comment, so in response to the first comment on this: I tried the above query and it did not work, I figured it just wasn't syntactically correct. Using MS Access, for what it's worth. ]

  Read the article

• Benefits to private networks between virtual machines on an ESXi host?

  - by arex1337

  I'm planning this development environment with a few database servers, and originally thought I would have a few private networks. I then thought it might be unnecessary as the ESXi cluster already provides redundancy with 4 NICs (in my case) and should manage the network traffic pretty intelligently, right? Two private networks Zero private networks What are the advantages/disadvantages between the two shown configurations - on an ESXi 4.1 host?

  Read the article

• Learning networking fundamentals

  - by bplus

  Not having a CS degree has left large holes in my programming related knowledge. In particular I'd really like to learn some of the computer networking stuff I would have got in a good CS degree. The problem I really have is "not knowing what I don't know". So far I know I don't know anything about the following (as far as computer networks are concearned) -sockets -ports -internet protocol (the whole IP stack I keep hearing about). Can anyone add more to the list? Can anyone suggest a project (writing a toy web server?) Thanks in advance

  Read the article

• AI Game Programming : Bayesian Networks, how to make efficient?

  - by Mahbubur R Aaman

  We know that AI is one of the most important part of Game Programming. Bayesian networks is one of the core part of AI at Game Programming. Bayesian networks are graphs that compactly represent the relationship between random variables for a given problem. These graphs aid in performing reasoning or decision making in the face of uncertainty. Here me, utilizing the monte carlo method and genetic algorithms. But tooks much time and sometimes crashes due to memory. Is there any way to implement efficiently?

  Read the article

• Deserializing a complex JSON result (array of dictionaries) with TouchJSON

  - by jpm

  I did a few tests with TouchJSON last night and it worked pretty well in general for simple cases. I'm using the following code to read some JSON content from a file, and deserialize it: NSString *jsonString = [[NSString alloc] initWithContentsOfFile:@"data.json"]; NSData *jsonData = [jsonString dataUsingEncoding:NSUTF32BigEndianStringEncoding]; NSError *error = nil; NSDictionary *items = [[CJSONDeserializer deserializer] deserializeAsDictionary:jsonData error:&error]; NSLog(@"total items: %d", [items count]); NSLog(@"error: %@", [error localizedDescription]); That works fine if I have a very simple JSON object in the file (i.e. a dictionary): {"id": "54354", "name": "boohoo"} This way I was able to get access to the array of values, as I wanted to get the item based on its index within the list: NSArray *items_list = [items allValues]; NSString *name = [items_list objectAtIndex:1]; (I understand that I could have fetched the name with the dictionary API) Now I would like to deserialize a semi-complex JSON string, which represents an array of dictionaries. An example of such a JSON string is below: [{"id": "123456", "name": "touchjson"}, {"id": "3456", "name": "bleh"}] When I try to run the same code above against this new content in the data.json file, I don't get any results back. My NSLog() call says "total items: 0", and no error is coming back in the NSError object. Any clues on what is going on? I'm completely lost on what to do, as there isn't much documentation available for TouchJSON, and much less usage examples.

  Read the article

• Complex Query on cassandra

  - by Sadiqur Rahman

  I have heard on cassandra database engine few days ago and searching for a good documentation on it. after studying on cassandra I got cassandra is more scalable than other data engine. I also read on Amazon SimpleDB but as SimpleDB has a limitation 10GB/table and Google Datastore is slower than Amazon SimpleDB, I prefer not to use them (Google Datastore, Amazon SimpleDB). So for making our site scaled specially high write rates with massive data, I like to use Cassandra as our Data Engine. But before starting using cassandra I am confused on "How to handle complex data using casssandra". I am giving you the MySQL database structure below, Please read this and give me a good suggestion. Users Table hasColum ID Primary hasColum email Unique hasColum FirstName hasColum LastName Category Table hasColum ID Primary hasColum Parent hasColum Category Posts Table hasColum ID Primary hasColum UID Index foreign key linked to users-ID hasColum CID Index foreign key linked to Category-ID hasColum Title hasColum Post Index hasColum PunDate Comments hasColum ID primary hasColum UID Index foreign key linked to users-ID hasColum PID Index foreign key linked to Posts-ID hasColum Comment User Group hasColum ID primary hasColum Name UserToGroup Table (for many to many relation only) hasColum UID foreign key linked to Users-ID hasColum GID foreign key linked to Group-ID Finally for your information, I like to use SimpleCassie PHP Class http://code.google.com/p/simpletools-php/ So, it will be very helpful if you can give me example using SimpleCassie

  Read the article

• Migrating complex SVN branch hierarchy to Mercurial

  - by Christian Hang

  Our team has been using SVN for managing an application of decent size and over time a rather complex hierarchy of branches and tags has built up, which is following the basic standard layout for SVN repositories, but is more nested: |-trunk |-branches | |-releases | | |-releaseA | | `-releaseB | `-features | |-featureX | `-featureY |-tags |-releaseA | |-beta | `-RTP `-releaseB |-beta `-RTP (The feature branches are obviously temporary branches but we have to take them into consideration as it won't be feasible to close all of them at once in the near future) For several reasons but primarily because merges have been becoming an increasing pain, we are considering to switch to Mercurial. The main problem we are currently facing is migrating the existing code base without losing our history. I've tried several migration tools (e.g., yasvn2hg, hg convert and svn2hg) with yasvn2hg being the most promising, but none of them seem to be able to deal with nested hierarchies but they all assume that branches and tags are organized in one flat directory respectively. The choice between named branches or clones as the conversion target of old SVN branches is not a limiting factor in this case, as either solution would be appreciated. We are currently experimenting with both options and how they would fit into our current processes but haven't decided on one yet. I'd obviously be interested in recommendations or experiences with similar setups concerning that issue as well. So, what is the best way to convert a nested SVN branch hierarchy like this to Mercurial? Converting one branch at a time into a separate repository would be quite annoying and I am not sure if that would be the right approach in the first place, depending on how the tools handle historic merges and need to be aware of all other branches?

  Read the article

• Complex Types, ModelBinders and Interfaces

  - by Kieron

  Hi, I've a scenario where I need to bind to an interface - in order to create the correct type, I've got a custom model binder that knows how to create the correct concrete type (which can differ). However, the type created never has the fields correctly filled in. I know I'm missing something blindingly simple here, but can anyone tell me why or at least what I need to do for the model binder to carry on it's work and bind the properties? public class ProductModelBinder : DefaultModelBinder { override public object BindModel (ControllerContext controllerContext, ModelBindingContext bindingContext) { if (bindingContext.ModelType == typeof (IProduct)) { var content = GetProduct (bindingContext); return content; } var result = base.BindModel (controllerContext, bindingContext); return result; } IProduct GetProduct (ModelBindingContext bindingContext) { var idProvider = bindingContext.ValueProvider.GetValue ("Id"); var id = (Guid)idProvider.ConvertTo (typeof (Guid)); var repository = RepositoryFactory.GetRepository<IProductRepository> (); var product = repository.Get (id); return product; } } The Model in my case is a complex type that has an IProduct property, and it's those values I need filled in. Model: [ProductBinder] public class Edit : IProductModel { public Guid Id { get; set; } public byte[] Version { get; set; } public IProduct Product { get; set; } }

  Read the article

• Complex ModelBinders and being in charge of creating part of the model

  - by Kieron

  Hi, I've a scenario where I need to bind to an interface - in order to create the correct type, I've got a custom model binder that knows how to create the correct concrete type (which can differ). However, the type created never has the fields correctly filled in. I know I'm missing something blindingly simple here, but can anyone tell me why or at least what I need to do for the model binder to carry on it's work and bind the properties? public class ProductModelBinder : DefaultModelBinder { override public object BindModel (ControllerContext controllerContext, ModelBindingContext bindingContext) { if (bindingContext.ModelType == typeof (IProduct)) { var content = GetProduct (bindingContext); return content; } var result = base.BindModel (controllerContext, bindingContext); return result; } IProduct GetProduct (ModelBindingContext bindingContext) { var idProvider = bindingContext.ValueProvider.GetValue ("Id"); var id = (Guid)idProvider.ConvertTo (typeof (Guid)); var repository = RepositoryFactory.GetRepository<IProductRepository> (); var product = repository.Get (id); return product; } } The Model in my case is a complex type that has an IProduct property, and it's those values I need filled in. Model: [ProductBinder] public class Edit : IProductModel { public Guid Id { get; set; } public byte[] Version { get; set; } public IProduct Product { get; set; } }

  Read the article

• Django: Complex filter parameters or...?

  - by minder

  This question is connected to my other question but I changed the logic a bit. I have models like this: from django.contrib.auth.models import Group class Category(models.Model): (...) editors = ForeignKey(Group) class Entry(models.Model): (...) category = ForeignKey(Category) Now let's say User logs into admin panel and wants to change an Entry. How do I limit the list of Entries only to those, he has the right to edit? I mean: How can I list only those Entries which are assigned to a Category that in its "editors" field has one of the groups the User belongs to? What if User belongs to several groups? I still need to show all relevant Entries. I tried experimenting with changelist_view() and queryset() methods but this problem is a bit too complex for me. I'm also wondering if granular-permissions could help me with the task, but for now I have no clue. I came up only with this: First I get the list of all Groups the User belongs to. Then for each Group I get all connected Categories and then for each Category I get all Entries that belong to these Categories. Unfortunately I have no idea how to stitch everything together as filter() parameters to produce a nice single QuerySet.

  Read the article

• Webservice complex types and class inheritance

  - by pygorex1

  Using the following Webservice definition using aClientArgs as a complex type: [System.Web.Script.Services.ScriptService] public class Controller : System.Web.Services.WebService { [WebMethod] public void save_client(aClientArgs client) { // Save client data } } Then defining aClientArgs as a sub-class: public class aArgs { public string id = null; public string name = null; } public class aClientArgs : aArgs { public string address = null; public string website = null; } Returns the following WSDL fragment for the save_client args: <save_client xmlns="http://tempuri.org/"> <client> <address>string</address> <website>string</website> </client> </save_client> When I'm expecting the following: <save_client xmlns="http://tempuri.org/"> <client> <id>string</id> <name>string</name> <address>string</address> <website>string</website> </client> </save_client> So it appears that the .NET WebService is not treating inherited properties as arguments/variables for purposes of a web service. How do I get .NET to also use the properties of the base class?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >