Search Results

Search found 1557 results on 63 pages for 'daniel standage'.

Page 20/63 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Hardware upgrade: Windows 7 bluescreens, Vista loads

  - by Daniel Schaffer

  I just did a fairly significant hardware upgrade while keeping my hard disks. The old system was a dell Optiplex 745 with an Intel Core 2 duo, LGA 775. The new system is custom built, Intel i5 750. I know you're supposed to do a clean install with a hardware upgrade like this, but I'd had success in the past doing the stealth hardware upgrade like this, so I figured I'd give it a shot. Windows 7 Ultimate 64 bit gets through the loading screen and immediately blue screens and reboots. Windows Vista Home Premium 32-bit, which I have on an old hard drive from an AMD box (!!) loads up fine. I ran through the windows memory checker just to be sure, and my memory is fine. So, is the BSOD the result of some sort of protection mechanism specific to Windows 7? Is there any hope of salvaging that install?

  Read the article

• Create private key with CSR

  - by Daniel Schlieckmann

  I have a CSR file (as a text file) and the corresponding P7B certificate. My problem is that I have to create a P12 file on a machine where I do not have created the CSR. I have created the CSR in Firefox Key Manager. Before, I imported the P7B file into certificate store in msc, then exported a CER-file, imported it in Key Manager and then exported the P12 file. This doesn't work anymore because I have another machine now. If I try to import the CER file created by msc, Key Manager says that there is no private key. Is there a possibility to create a private key?

  Read the article

• Yahoo Mail Does Not Have https

  - by Daniel

  Why is yahoo mail behind in security, they don't support https yet. Gmail and many others do, I'm shocked that yahoo still doesn't have https? Why is this? What is the logic behind not supporting https in their mail client?

  Read the article

• Forwarding HTTP Request with Direct Server Return

  - by Daniel Crabtree

  I have servers spread across several data centers, each storing different files. I want users to be able to access the files on all servers through a single domain and have the individual servers return the files directly to the users. The following shows a simple example: 1) The user's browser requests http://www.example.com/files/file1.zip 2) Request goes to server A, based on the DNS A record for example.com. 3) Server A analyzes the request and works out that /files/file1.zip is stored on server B. 4) Server A forwards the request to server B. 5) Server B returns file1.zip directly to the user without going through server A. Note: steps 4 and 5 must be transparent to the user and cannot involve sending a redirect to the user as that would violate the requirement of a single domain. From my research, what I want to achieve is called "Direct Server Return" and it is a common setup for load balancing. It is also sometimes called a half reverse proxy. For step 4, it sounds like I need to do MAC Address Translation and then pass the request back onto the network and for servers outside the network of server A tunneling will be required. For step 5, I simply need to configure server B, as per the real servers in a load balancing setup. Namely, server B should have server A's IP address on the loopback interface and it should not answer any ARP requests for that IP address. My problem is how to actually achieve step 4? I have found plenty of hardware and software that can do this for simple load balancing at layer 4, but these solutions fall short and cannot handle the kind of custom routing I require. It seems like I will need to roll my own solution. Ideally, I would like to do the routing / forwarding at the web server level, i.e. in PHP or C# / ASP.net. However, I am open to doing it at a lower level such as Apache or IIS, or at an even lower level, i.e. a custom proxy service in front of everything. Thanks.

  Read the article

• Connect ps/2->usb keyboard to linux?

  - by Daniel

  I have a lovely ancient ergonomic keyboard (no name SK - 6000) connected via a DIN-ps/2 adapter to a ps/2-usb adapter to my docking station. After Grub it stops working. It takes either suspending and waking up or replugging it while Linux is running to get it to work. No extra kernel modules get loaded for this. When it works and I restart without power off, it will work immediately. Even when it does not work, it is visible (lsusb device number varies but output is identical whether working or not): $ lsusb -v -s 001:006 Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a81 Chesen Electronics Corp. idProduct 0x0205 PS/2 Keyboard+Mouse Adapter bcdDevice 0.10 iManufacturer 1 CHESEN iProduct 2 PS2 to USB Converter iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 2 PS2 to USB Converter bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 148 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) $ ll -R /sys/bus/hid/drivers/ /sys/bus/hid/drivers/: total 0 drwxr-xr-x 2 root root 0 Jul 8 2012 generic-usb/ /sys/bus/hid/drivers/generic-usb: total 0 lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:046D:C03D.0003 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C03D.0003/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0001 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0002 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:0A81:0205.0002/ --w------- 1 root root 4096 Jul 7 23:32 bind lrwxrwxrwx 1 root root 0 Jul 7 23:33 module -> ../../../../module/usbhid/ --w------- 1 root root 4096 Jul 7 23:32 new_id --w------- 1 root root 4096 Jul 8 2012 uevent --w------- 1 root root 4096 Jul 7 23:32 unbind When replugging, dmesg shows this (which except for the 1st line and different input numbers already came at boot time): [ 1583.295385] usb 1-1.2.1: new low-speed USB device number 6 using ehci_hcd [ 1583.446514] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input17 [ 1583.446817] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input0 [ 1583.454764] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input18 [ 1583.455534] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input1 [ 1583.455578] usbcore: registered new interface driver usbhid [ 1583.455584] usbhid: USB HID core driver So I tried $ sudo udevadm test /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/40-usb-media-players.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 ... parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file udev_rules_new: rules use 271500 bytes tokens (22625 * 12 bytes), 44331 bytes buffer udev_rules_new: temporary index used 76320 bytes (3816 * 20 bytes) udev_device_new_from_syspath: device 0x7f78a5e4d2d0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_new_from_syspath: device 0x7f78a5e5f820 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_read_db: device 0x7f78a5e5f820 filled with db file data udev_device_new_from_syspath: device 0x7f78a5e60270 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001' udev_device_new_from_syspath: device 0x7f78a5e609c0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0' udev_device_new_from_syspath: device 0x7f78a5e61160 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1' udev_device_new_from_syspath: device 0x7f78a5e61960 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2' udev_device_new_from_syspath: device 0x7f78a5e62150 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1' udev_device_new_from_syspath: device 0x7f78a5e62940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1' udev_device_new_from_syspath: device 0x7f78a5e630f0 has devpath '/devices/pci0000:00/0000:00:1a.0' udev_device_new_from_syspath: device 0x7f78a5e638a0 has devpath '/devices/pci0000:00' udev_event_execute_rules: no node name set, will use kernel supplied name 'hidraw0' udev_node_add: creating device node '/dev/hidraw0', devnum=251:0, mode=0600, uid=0, gid=0 udev_node_mknod: preserve file '/dev/hidraw0', because it has correct dev_t udev_node_mknod: preserve permissions /dev/hidraw0, 020600, uid=0, gid=0 node_symlink: preserve already existing symlink '/dev/char/251:0' to '../hidraw0' udev_device_update_db: created empty file '/run/udev/data/c251:0' for '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' ACTION=add DEVNAME=/dev/hidraw0 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 MAJOR=251 MINOR=0 SUBSYSTEM=hidraw UDEV_LOG=6 USEC_INITIALIZED=969079051 The later lines sound like it's already there. And none of these awakes the keyboard: $ sudo udevadm trigger --verbose --sysname-match=usb* /sys/devices/pci0000:00/0000:00:1a.0/usb1 /sys/devices/pci0000:00/0000:00:1a.0/usbmon/usbmon1 /sys/devices/pci0000:00/0000:00:1d.0/usb2 /sys/devices/pci0000:00/0000:00:1d.0/usbmon/usbmon2 /sys/devices/virtual/usbmon/usbmon0 $ sudo udevadm trigger --verbose --sysname-match=hidraw0 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 $ sudo udevadm trigger I also tried this to no avail: # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind ksh: echo: write to 1 failed [No such device] # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/unbind # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind # echo usb1 >/sys/bus/usb/drivers/usb/unbind # echo usb1 >/sys/bus/usb/drivers/usb/bind What else should I try to get the same result as replugging or suspending, by just issuing a command?

  Read the article

• Wireless disconnects at random after upgrade to Ubuntu 10.4

  - by Daniel Elessedil Kjeserud

  After upgrading my home server from Ubuntu 8.10 to 10.4 my wireless seemingly drops out, even though my IRC client keeps it's connection to the servers, so it looks like the machine just stops taking wireless requests. A ping will give a me this Request timeout for icmp_seq 27 ping: sendto: Host is down After a while the machine just starts responding again, without any interaction from me. When the machine comes back, this is what dmesg gives me [ 18.296288] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.296350] wlan0: deauthenticating from 00:1b:63:22:a4:5f by local choice (reason=3) [ 18.296440] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.298697] wlan0: direct probe responded [ 18.298706] wlan0: authenticate with AP 00:1b:63:22:a4:5f (try 1) [ 18.306836] wlan0: authenticated [ 18.306886] wlan0: associate with AP 00:1b:63:22:a4:5f (try 1) [ 18.309396] wlan0: RX AssocResp from 00:1b:63:22:a4:5f (capab=0x411 status=0 aid=2) [ 18.309402] wlan0: associated [ 18.310187] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.447742] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 18.447748] apm: overridden by ACPI. [ 19.163282] padlock: VIA PadLock not detected. [ 28.352022] wlan0: no IPv6 routers present kjes@brin:~$ lspci 02:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g It's on a wireless network with WPA2, the machine worked without any problems on the same wireless network since Ubuntu 8.10 was the most resent version, and there have been no changes to my network recently. Even though the server drops out, everything else on the network keeps working like normal.

  Read the article

• What is the best way to import and/or sync Gmail-Google contacts with Skype contacts?

  - by Daniel

  What is the best way to import and/or sync Gmail-Google contacts with Skype contacts? Is this even possible?

  Read the article

• How to install apt-get on a busybox embedded system?

  - by Daniel YC Lin

  My embedded system is for sh4 CPU. The debian distribution may get on http://www.si-linux.co.jp/pub/debian-sh/lenny-sh4/ I get the apt*.deb and extract the data.tar.gz. After setup the /etc/apt/sources.list, I could do 'apt-get update'. But it missing dependency when I try to run 'apt-get install ntpdate'. Is there any method to let apt-get ignore some base packages? Because those package is build by my original embedded system.(eg. busybox).

  Read the article

• How should I set up my Hyper-V server and network topology?

  - by Daniel Waechter

  This is my first time setting up either Hyper-V or Windows 2008, so please bear with me. I am setting up a pretty decent server running Windows Server 2008 R2 to be a remote (colocated) Hyper-V host. It will be hosting Linux and Windows VMs, initially for developers to use but eventually also to do some web hosting and other tasks. Currently I have two VMs, one Windows and one Ubuntu Linux, running pretty well, and I plan to clone them for future use. Right now I'm considering the best ways to configure developer and administrator access to the server once it is moved into the colocation facility, and I'm seeking advice on that. My thought is to set up a VPN for access to certain features of the VMs on the server, but I have a few different options for going about this: Connect the server to an existing hardware firewall (an old-ish Netscreen 5-GT) that can create a VPN and map external IPs to the VMs, which will have their own IPs exposed through the virtual interface. One problem with this choice is that I'm the only one trained on the Netscreen, and its interface is a bit baroque, so others may have difficulty maintaining it. Advantage is that I already know how to do it, and I know it will do what I need. Connect the server directly to the network and configure the Windows 2008 firewall to restrict access to the VMs and set up a VPN. I haven't done this before, so it will have a learning curve, but I'm willing to learn if this option is better long-term than the Netscreen. Another advantage is that I won't have to train anyone on the Netscreen interface. Still, I'm not certain if the capabilities of the Windows software firewall as far as creating VPNs, setting up rules for external access to certain ports on the IPs of Hyper-V servers, etc. Will it be sufficient for my needs and easy enough to set up / maintain? Anything else? What are the limitations of my approaches? What are the best practices / what has worked well for you? Remember that I need to set up developer access as well as consumer access to some services. Is a VPN even the right choice?

  Read the article

• Windows 8.1 won't accept my Media Center Pack Product Key

  - by Daniel

  I just installed Windows 8.1 Pro as an upgrade from an ISO torrent. I was able to activate my original Windows 8 key successfully. However, I tried to activate my Media Center Pack key that I purchased for Windows 8 and it errors out the first try. When I try to activate it again, it then says "This key won't work. Check it and try again, or try a different key.". Do I have to purchase the key again? Thanks

  Read the article

• Debian DNSSEC - howto secure a domain?

  - by Daniel Marschall

  I have a beginner question about DNSSEC. I have much experience with TLS and cryptography-stuff and would like to try out this new technology. I have googled very much about this but I haven't found useful information for me. I think one confusion in information gathering is that "Debian howto DNSSEC setup" can mean "How to USE DNSSEC for resolving" OR "How to secure your domain with DNSSEC". I am searching the second. I am running a Debian Squeeze server with root privileges which has a domain name ending with ".de" (which is already signed by the root zone). The network interface at this server uses the gateway IP (DNS resolver?) of the datacentre the server is running on. My domain is hosted at freedns.afraid.org , where I can add DNS RRs for my domain. They are currently NOT capable of adding DNSSEC RRs, but I am bugging them to support this soon. ;-) My simple question is: How do I setup DNSSEC on Debian? Resp. who have I ask to? As far as I understand, all I have to do is to run dnssec-keygen on my Debian server and then add the key to my DNS-provider as DNSSEC RR. (And change it every 30 days?) I have looked at this http://www.isc.org/files/DNSSEC_in_6_minutes.pdf but it looks like you have to be the owner of a ZONE, so I don't think this applies to me. Who needs to sign my domain? My DNS-provider or my zone (DeNIC) or can I do it myself? Any help is very appreciated!

  Read the article

• AnyConnect SSL VPN split tunneling for a single website?

  - by Daniel Lucas

  We have a Cisco ASA 5510. We use split tunneling for AnyConnect SSL VPN clients. All internal addresses are tunnelled. Everything else is routed through the client's own internet connection. We use a SaaS service that only responds to requests when they come from one of our own public IP addresses. Because of this, VPN users are unable to access it currently. Is there a way to specify that a specific website should be tunneled and all others should not? NOTE: Worst case we will use a web bookmark on the clientless portal to tranlate through our network, but I'd like to see if the above is possible first.

  Read the article

• Sendmail SMART_HOST not working

  - by daniel

  Hello, I've defined SMART_HOST to be a specific server, lets call it foo.bar.com. However, when I send a test mail using 'sendmail -t', sendmail tries to use mx.bar.com, which subsequently rejects my mail. I've verified that foo.bar.com works and that mx.bar.com does not work (yay telnet). I've recompiled sendmail.mc vi make, make -C and m4. I've verified the DS entry in sendmail.cf. I've restarted sendmail correctly. I'm not sure how to proceed at this point. Any ideas? Here is my SMART_HOST line: define(SMART_HOST',foo.bar.com')dnl ...and here is the result of a test mail. It never tries to use foo.bar.com, instead it uses mx.bar.com. $ echo subject: test; echo | sendmail -Am -v -flocaluser -- [email protected] subject: test [email protected]... Connecting to mx.bar.com via relay... 220 mx.bar.com ESMTP >>> EHLO myhost.bar.com 250-mx.bar.com 250-8BITMIME 250 SIZE 52428800 >>> MAIL From:<[email protected]> SIZE=1 250 sender <[email protected]> ok >>> RCPT To:<[email protected]> 550 #5.1.0 Address rejected. >>> RSET 250 reset localuser... Connecting to local... localuser... Sent Closing connection to mx.bar.com. >>> QUIT 221 mx.bar.com And last, here is a test mail sent using foo.bar.com: $ hostname myhost.bar.com $ telnet foo.bar.com 25 Trying ***.***.***.***... Connected to foo.bar.com (***.***.***.***). Escape character is '^]'. 220 foo.bar.com ESMTP Sendmail 8.14.1/8.14.1/ITS-7.0/ldap2-1+tls; Tue, 21 Dec 2010 13:27:44 -0700 (MST) helo foo 250 foo.bar.com Hello myhost.bar.com [***.***.***.***], pleased to meet you mail from: [email protected] 250 2.1.0 [email protected]... Sender ok rcpt to: [email protected] 250 2.1.5 [email protected]... Recipient ok data 354 Enter mail, end with "." on a line by itself testing . 250 2.0.0 oBLKRikZ003758 Message accepted for delivery quit 221 2.0.0 foo.bar.com closing connection Connection closed by foreign host. Any ideas? Thanks

  Read the article

• OpenVPN with MacOS X Client and same subnets in local and remote net.

  - by Daniel

  I have a homenetwork 192.168.1.0/24 with gteway 192.168.1.1 and a remote network with the same parameters. Now I want to create a OpenVPN tunnel between those networks. I have no problems with Windows, because Windows routes everything to 192.168.1.0/24 except 192.168.1.1 throught the tunnel. On MacOS X however I see the folling line in the Details window: 2010-05-10 09:13:01 WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] When I list the routes I get the following: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 13 3 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 12 3589 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1 0:1e:e5:f4:ec:7f UHLW 13 17 en1 1103 192.168.1.101 localhost UHS 0 0 lo0 192.168.6 192.168.6.5 UGSc 0 0 tun0 192.168.6.5 192.168.6.6 UH 1 0 tun0 My Interfaces are en1 - My local Wifi network tun0 - The tunnel interface As can be seen from the routes above there is no entry for 192.168.1.0/24 that routes the traffic through the tunnel interface. When I manually route a single IP like 192.168.1.16 over the tunnel gateway 192.168.6.6, this works. Q: How do I set up my routes in MacOS X for the same behaviour as on windows, to route everything except 192.168.1.1 through the tunnel, but leave the default gateway to be my local 192.168.1.1 ?

  Read the article

• Win XP Virtual Machine APP that won't START as a terminal services client

  - by Daniel

  I have a Win XP Virtual Machine APP that won't START as a terminal services client..... but if i disable terminal services inside the virtual machine, start the app then start terminal services... the APP runs fine (so long as terminal services are disabled when it starts.....!) My question is... is it possible to script things somehow so as to allow this app to be accessed directly from win 7 (with out having to manually run XP virtual machine)... I.E as I can not run it this way as it won't START with terminal services running.... I.e is it somehow possible to script things so the APP starts and terminal services is delayed then kicks in after a time delay.... (I know this may not be possible but I'm getting sick of all the mucking around...)

  Read the article

• How can I boot Ubuntu 10.04 on my MacBook Pro from a USB hard drive?

  - by Daniel Huckstep

  I installed Ubuntu 10.04 to my MacBook Pro (not the latest gen with i7, but one before that) on an external, USB harddrive (GRUB installed to the external as well). When I hold down the option key to try to select the external, it doesn't show up. After some looking around, my understanding is that it won't boot 'unsupported' operating system from an external drive. I have ran OSX from an external when I upgraded my harddrive. What can I do (or is it even possible) to allow my MacBook Pro to boot the Ubuntu drive?

  Read the article

• Are licenses for OSS required when purchasing hosting?

  - by Daniel Beardsley

  I'm a developer and while working on a project a question came up about licensing. The web application I'm working on will be closed source and we are looking at a few different hosting providers. Are commercial licenses required for using software released under GPL (i.e MySQL)? Or does the hosting provider take care of that?

  Read the article

• How to do a hexdump of first track of HDD?

  - by Daniel Gratz

  How would i do a hexdump in Ubuntu for the first track of a HDD? I am looking for a winhex-esque output if that makes sense. The first track has 63 sectors, each 512 bytes long. I tried dd if=/dev/sda bs=1 count=512 | hexdump -C but that only gave me what appears to be the MBR, or first sector of the HDD. I guess i am confused about what bs and count should be. Bs means how many bytes to display and count is how many multiples of bs? Thanks!

  Read the article

• Have an unprivileged non-account user ssh into another box?

  - by Daniel Quinn

  I know how to get a user to ssh into another box with a key: ssh -l targetuser -i path/to/key targethost But what about non-account users like apache? As this user doesn't have a home directory to which it can write a .ssh directory, the whole thing keeps failing with: $ sudo -u apache ssh -o StrictHostKeyChecking=no -l targetuser -i path/to/key targethost Could not create directory '/var/www/.ssh'. Warning: Permanently added '<hostname>' (RSA) to the list of known hosts. Permission denied (publickey). I've tried variations using -o UserKnownHostsFile=/dev/null and setting $HOME to /dev/null and none of these have done the trick. I understand that sudo could probably fix this for me, but I'm trying to avoid having to require a manual server config since this code will be deployed on a number of different environments. Any ideas? Here's a few examples of what I've tried that don't work: $ sudo -u apache export HOME=path/to/apache/writable/dir/ ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -l deploy -i path/to/key targethost Eventually, I'll be using this solution to run rsync as the apache user.

  Read the article

• Clicking or Knocking with Seagate HD

  - by Daniel A. White

  My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

  Read the article

• OS X HD as USB HD (to PC)

  - by Daniel

  Is it possible to hook up a Mac to a PC via USB, and have direct access to the hard drive? Is there any software that could do this?

  Read the article

• How to access Parallels guest network services in a shared network virtual machine running in Mac OS

  - by Daniel Silveira

  I have a Windows virtual machine running inside Parallels in my Mac OSX. This virtual machine is setup to use shared network. What I want is: How to access a IIS service running inside this virtual machine from other computers in the network?

  Read the article

• Exchange 2003 ActiveSync fine but GAL lookups not working

  - by Daniel Lucas

  We have Exchange 2003 SP2 and use ActiveSync for our mobile devices (iOS and sever Android versions). Everything works except for GAL lookups and we've confirmed that the devices and client versions we are trying it on are supposed to support it. The symptom is different depending on the client, but there is never an error. In a nutshell, lookups return no results. This was working previously and we aren't sure what has changed. Are there logs in Exchange or IIS that will allow me to see GAL lookup transactions? Could it be a GAL permissions issue? (No issues with GAL in Outlook) Could it have been caused by upgrading our DCs to 2008 and increasing the forest/domain functional levels?

  Read the article

• Raid1 with active and spare partition

  - by Daniel Baron

  I am having the following problem with a RAID1 software raid partition on my Ubuntu system (10.04 LTS, 2.6.32-24-server in case it matters). One of my disks (sdb5) reported I/O errors and was therefore marked faulty in the array. The array was then degraded with one active device. Hence, I replaced the harddisk, cloned the partition table and added all new partitions to my raid arrays. After syncing all partitions ended up fine, having 2 active devices - except one of them. The partition which reported the faulty disk before, however, did not include the new partition as an active device but as a spare disk: md3 : active raid1 sdb5[2] sda5[1] 4881344 blocks [2/1] [_U] A detailed look reveals: root@server:~# mdadm --detail /dev/md3 [...] Number Major Minor RaidDevice State 2 8 21 0 spare rebuilding /dev/sdb5 1 8 5 1 active sync /dev/sda5 So here is the question: How do I tell my raid to turn the spare disk into an active one? And why has it been added as a spare device? Recreating or reassembling the array is not an option, because it is my root partition. And I can not find any hints to that subject in the Software Raid HOWTO. Any help would be appreciated.

  Read the article

• Looking to replace Ghost with FSArchiver or Clonezilla, few questions about capabilities

  - by Daniel Wright

  I work for a PC Repair company and we are looking into setting up a dedicated machine with externally accessible SATA bays to clone harddrives as a safety net incase something goes wrong during a repair. We currently use a SATA/PATA to USB bridge called MagicBridge and Norton Ghost on any workstation, but we're looking to move away from Ghost. We have a computer with a large RAID5 array with Windows Server 2008 Standard currently installed, but this can be replaced with a flavour of *nix. I have some experience with Clonezilla, but FSArchiver also seems like a suitable replacment too. My Head Technician wants to know if my chosen solution (probably Clonezilla or FSArchiver, but I'm open to free suggestions) is capable of: Cloning a degraded RAID, such as a single drive from a RAID1 mirror without complaining Producing images that are easily mountable (he'd prefer them to be mountable in Windows, but if there is no other easy way, *nix should be fine) akin to Ghost Explorer so individual files can be restored as well as being able to do bare metal restores. My apologies for wordiness but I wanted to be thorough in my explaination. Thanks for any suggestions or tips :) EDIT: I've just found out that Clonezilla has a workaround for cloning RADI1 drives EDIT2: Found the answer to both of my questions, aparently I wasn't phrasing my searches right, could this question be deleted please?

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >