Search Results

Search found 6171 results on 247 pages for 'debian installer'.

Page 20/247 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Very slow write performance on Debian 6.0 (AMD64) with DMCRYPT/LVM/RAID1

    - by jdelic
    I'm seeing very strange performance characteristics on one of my servers. This server is running a simple two-disk software-RAID1 setup with LVM spanning /dev/md0. One of the logical volumes /dev/vg0/secure is encrypted using dmcrypt with LUKS and mounted with the sync and noatimes flag. Writing to that volume is incredibly slow at 1.8 MB/s and the CPU usage stays near 0%. There are 8 crpyto/1-8 processes running (it's a Intel Quadcore CPU). I hope that someone on serverfault has seen this before :-(. uname -a 2.6.32-5-xen-amd64 #1 SMP Tue Mar 8 00:01:30 UTC 2011 x86_64 GNU/Linux Interestingly, when I read from the device I get good performance numbers: reading without encryption: $ dd if=/dev/vg0/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 68.8951 s, 95.1 MB/s reading with encryption: $ dd if=/dev/mapper/secure of=/dev/null bs=64k count=100000 100000+0 records in 100000+0 records out 6553600000 bytes (6.6 GB) copied, 69.7116 s, 94.0 MB/s However, when I try to write to the device: $ dd if=/dev/zero of=./test bs=64k 8809+0 records in 8809+0 records out 577306624 bytes (577 MB) copied, 321.861 s, 1.8 MB/s Also, when I read I see CPU usage, when I write, the CPU stays at almost 0% usage. Here is output of cryptsetup luksDump: LUKS header information for /dev/vg0/secure Version: 1 Cipher name: aes Cipher mode: cbc-essiv:sha256 Hash spec: sha1 Payload offset: 2056 MK bits: 256 MK digest: dd 62 b9 a5 bf 6c ec 23 36 22 92 4c 39 f8 d6 5d c1 3a b7 37 MK salt: cc 2e b3 d9 fb e3 86 a1 bb ab eb 9d 65 df b3 dd d9 6b f4 49 de 8f 85 7d 3b 1c 90 83 5d b2 87 e2 MK iterations: 44500 UUID: a7c9af61-d9f0-4d3f-b422-dddf16250c33 Key Slot 0: ENABLED Iterations: 178282 Salt: 60 24 cb be 5c 51 9f b4 85 64 3d f8 07 22 54 d4 1a 5f 4c bc 4b 82 76 48 d8 a2 d2 6a ee 13 d7 5d Key material offset: 8 AF stripes: 4000 Key Slot 1: DISABLED Key Slot 2: DISABLED Key Slot 3: DISABLED Key Slot 4: DISABLED Key Slot 5: DISABLED Key Slot 6: DISABLED Key Slot 7: DISABLED

    Read the article

  • samba sync password with unix password on debian wheezy

    - by Oz123
    I installed samba on my server and I am trying to write a script to spare me the two steps to add user, e.g.: adduser username smbpasswd -a username My smb.conf states: # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. unix password sync = yes Further reading brought me to pdbedit man page which states: -a This option is used to add a user into the database. This com- mand needs a user name specified with the -u switch. When adding a new user, pdbedit will also ask for the password to be used. Example: pdbedit -a -u sorce new password: retype new password Note pdbedit does not call the unix password syncronisation script if unix password sync has been set. It only updates the data in the Samba user database. If you wish to add a user and synchronise the password that im- mediately, use smbpasswd’s -a option. So... now I decided to try adding a user with smbpasswd: 1st try, unix user still does not exist: root@raspberrypi:/home/pi# smbpasswd -a newuser New SMB password: Retype new SMB password: Failed to add entry for user newuser. 2nd try, unix user exists: root@raspberrypi:/home/pi# useradd mag root@raspberrypi:/home/pi# smbpasswd -a mag New SMB password: Retype new SMB password: Added user mag. # switch to user pi, and try to switch to mag root@raspberrypi:/home/pi# su pi pi@raspberrypi ~ $ su mag Password: su: Authentication failure So, now I am asking myself: how do I make samba passwords sync with unix passwords? where are samba passwords stored? Can someone help enlighten me?

    Read the article

  • Debian network bridge configuration - /etc/network/interfaces

    - by Mathias
    I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

    Read the article

  • Memory usage on debian webserver keeps going up

    - by Steven De Groote
    my webserver is running apache 1.3.x for a PHP application, along with mysql on the same machine. Most of the time it runs fine, CPU usage still with nice margin, but somehow memory usage keeps growing throughout uptime. While it looks like it is chunked from time to time, I've had moments my server going down because it's out of memory. Restarting apache or mysql only reduced memusage by 100M. Attached is an overview of monthly memory usage. The 2 massive drops are server restarts after out-of-memory situations. http://imageshack.us/photo/my-images/51/memorymonth.png/ Any explanations for his behaviour or how I could solve this? Thanks! Steven

    Read the article

  • Connecting to localhost resolves 127.0.0.1 but connects with external IP [Linux, Debian]

    - by skgsergio
    I'm having a problem with a dedicated server, I don't known if it's the default behavior but this is the problem: If I connect to a service located on the server with localhost the service gets as source IP the external IP. Let me show an example, I use netcat for listening on 127.0.0.1:4444 xxxxxx # nc -vv -l -s 127.0.0.1 -p 4444 listening on [127.0.0.1] 4444 ... Lets check if it's ok: xxxxxx ~ # netstat -atnp | grep 4444 tcp 0 0 127.0.0.1:4444 0.0.0.0:* LISTEN 14038/nc Ok lets connect: xxxxxx ~ # nc -vv 127.0.0.1 4444 localhost [127.0.0.1] 4444 (?) open Return to the tty that have the listening process and I get this: connect to [127.0.0.1] from xxxxxx.net [176.31.xxx.xx] 50354 So that's the problem. I have a server daemon that have to listen on localhost and checks that the ip is 127.0.0.1 when the client connects but for some reason when I connect to localhost it reports the external ip... If I do the same with IPv6 it works as excepted... Detects connection as localhost (::1). Some info that can be useful: "localhost" resolves without problems to 127.0.0.1 xxxxxx ~ # ping -c1 localhost PING localhost (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost (127.0.0.1): icmp_req=1 ttl=64 time=0.086 ms Nothing weird on my hosts file, I think... xxxxxx ~ # grep -v ^# /etc/hosts 127.0.0.1 localhost localhost.localdomain 176.31.xxx.xx xxxxxx.net ns1.xxxxxx.net ::1 ip6-localhost ip6-loopback feo0::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts And ifconfig reports all ok... eth0 Link encap:Ethernet HWaddr e0:69:95:d8:30:a1 inet addr:176.31.xxx.xx Bcast:176.31.108.255 Mask:255.255.255.0 inet6 addr: 2001:41d0:8:xxxx::/64 Scope:Global inet6 addr: 2001:41d0:8:xxxx:x:xx:xx:xx/64 Scope:Global inet6 addr: fe80::e269:95ff:fed8:30a1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16916 errors:0 dropped:0 overruns:0 frame:0 TX packets:16914 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8410679 (8.0 MiB) TX bytes:10539881 (10.0 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:5570 errors:0 dropped:0 overruns:0 frame:0 TX packets:5570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:744490 (727.0 KiB) TX bytes:744490 (727.0 KiB)

    Read the article

  • ffserver-2.2 - streaming an ASF video as Webm output with ffserver on Debian 7.5

    - by Emmanuel Brunet
    I'm trying to stream an IP webcam ASF live stream to a ffserver to output a webm video format. The server starts successfully but the ffserver commands used to feed the ffserver fails and generates a core dump. Input stream $ ffprobe http://account:password@webcam/videostream.asf Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, 1 channels, s16p, 32 kb/s ffserver configuration my ffserver configuration is : Port 8091 RTSPPort 554 BindAddress 192.168.1.62 MaxHTTPConnections 1000 MaxClients 100 MaxBandwidth 1000 CustomLog - <Feed webcam.ffm> File /tmp/webcam.ffm FileMaxSize 500M ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Feed> <Stream webcam.webm> # Output stream URL definition Feed webcam.ffm # Feed from which to receive video Format webm # Audio settings AudioCodec vorbis AudioBitRate 64 # Audio bitrate # Video settings VideoCodec libvpx VideoSize 640x480 # Video resolution VideoFrameRate 25 # Video FPS AVOptionVideo flags +global_header # Parameters passed to encoder # (same as ffmpeg command-line parameters) AVOptionVideo cpu-used 0 AVOptionVideo qmin 10 AVOptionVideo qmax 42 AVOptionVideo quality good AVOptionAudio flags +global_header PreRoll 15 StartSendOnKey # VideoBitRate 32 # Video bitrate </Stream> <Stream status.html> Format status # Only allow local people to get the status ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Stream> ffmpeg feed I run the following command that fails $ ffmpeg -i http://account:password@webcam/videostream.asf http://ffserver_ip:port/webcam.ffm http://192.168.1.62:8091/webcam.ffm Input #0, asf, from 'http://account:password@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 25 tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x36a80c0] deprecated pixel format used, make sure you did set range correctly Segmentation fault I tryed $ ffmpeg -i http://account:password@webcam/videostream.asf -pix_fmt yuv420p http://ffserver_ip:port/webcam.ffm But it raises the same error. Thanks for your help Edit For an easy testing (I thought), I tried to publish the whole ASF stream as is, meaning connecting the ASF webcam output stream to the ffserver that outputs ASF format too. And thus with mirrored encoding so I changed the ffserver configuration to ... <Stream webcam.asf> Feed webcam.ffm Format asf VideoFrameRate 25 VideoSize 640X480 VideoBitRate 256 VideoBufferSize 1000 VideoGopSize 30 AudioBitRate 32 StartSendOnKey </Stream> ... And the output is now : Input #0, asf, from 'http://admin:alpha1237@webcam/videostream.asf': Duration: N/A, start: 0.000000, bitrate: 32 kb/s Stream #0:0: Video: mjpeg (MJPG / 0x47504A4D), yuvj422p(pc), 640x480, 1k tbr, 1k tbn, 1k tbc Stream #0:1: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s16p, 32 kb/s [swscaler @ 0x3d620c0] deprecated pixel format used, make sure you did set range correctly Output #0, ffm, to 'http://192.168.1.62:8091/webcam.ffm': Metadata: creation_time : now encoder : Lavf55.40.100 Stream #0:0: Audio: wmav2, 22050 Hz, mono, fltp, 32 kb/s Metadata: encoder : Lavc55.64.100 wmav2 Stream #0:1: Video: msmpeg4v3 (msmpeg4), yuv420p, 640x480, q=2-31, 256 kb/s, 1k fps, 1000k tbn, 1k tbc Metadata: Stream mapping: Stream #0:1 -> #0:0 (adpcm_ima_wav -> wmav2) Stream #0:0 -> #0:1 (mjpeg -> msmpeg4) Press [q] to stop, [?] for help Segmentation fault I can't even forward the stream. Thanks for your help again.

    Read the article

  • Debian, Apache2, CGI: paths issue

    - by Bubnoff
    I have a perl form email script on the servers cgi-bin directory ( /usr/lib/cgi-bin ). /etc/apache2/sites-enabled/000-default ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch AddHandler cgi-script cgi pl Order allow,deny Allow from all </Directory> The issue is with paths. html calls script here: <form name="Request" method="post" action="http://server-test.local/cgi-bin/formprocessorpro.pl" onsubmit="return checkWholeForm49874(this)"> The directory with the templates and configs is passed here: <input type="hidden" name="base_path" value="../contact" /> The path to this form is: http://server-test.local/formstest/contact.htm No matter what variation I try for the base_path I get an error from the formprocessor script that it can't find the directory: An error occurred when opening the Form Configuration File (../contact/form.cfg): No such file or directory. I need to move this script from an old server, configured by a previous sysadmin, to a new server. Since cgi-bin is automatically linked to /usr/lib/cgi-bin and linked such that the script resides: http://server-test.local/cgi-bin/formprocessorpro.pl I would imagine that, given that the templates are in the webroot in a directory called contact, the correct path would be: ../contact Any ideas? It's been awhile since I've messed with CGI. Bubnoff

    Read the article

  • How to power off a Debian Linux box via console

    - by Luke Puplett
    Brand new to Linux. I need to turn my box off and put it in my server room. The help here and everywhere seems not to work for me: http://debianhelp.co.uk/shutdown.htm I get: lukepuplett@uktnlx01:~$ poweroff -bash: poweroff: command not found lukepuplett@uktnlx01:~$ shutdown -bash: shutdown: command not found lukepuplett@uktnlx01:~$ modprobe apm -bash: modprobe: command not found lukepuplett@uktnlx01:~$ I also tried halt, reboot, goaway, and pleasejustwork.

    Read the article

  • Failed to install ntp via apt-get in Debian

    - by Petah
    When trying to install ntp (because my server clock is wrong), it just pukes this massive error. Any idea how to fix this? root@pan-prodweb01:~# apt-get install ntp Reading package lists... Done Building dependency tree Reading state information... Done ntp is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 75 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up ntp (1:4.2.6.p2+dfsg-1+b1) ... insserv: warning: script 'S99obmaua' missing LSB tags and overrides insserv: warning: script 'S99obmscheduler' missing LSB tags and overrides insserv: warning: script 'obmscheduler' missing LSB tags and overrides insserv: warning: script 'obmaua' missing LSB tags and overrides insserv: There is a loop between service stop-bootlogd and mountnfs if started insserv: loop involving service mountnfs at depth 8 insserv: loop involving service nfs-common at depth 7 insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$aconfigured to not write apport reports ll' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmaua depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Starting obmscheduler depends on stop-bootlogd and therefore on system facility `$all' which can not be true! insserv: Max recursions depth 99 reached insserv: loop involving service tomcat6 at depth 9 insserv: There is a loop between service stop-bootlogd and mountall if started insserv: loop involving service mountall at depth 4 insserv: loop involving service checkfs at depth 3 insserv: loop involving service mountnfs-bootclean at depth 10 insserv: loop involving service networking at depth 6 insserv: There is a loop between service stop-bootlogd and checkroot if started insserv: loop involving service checkroot at depth 5 insserv: loop involving service hostname at depth 4 insserv: loop involving service kbd at depth 12 insserv: loop involving service module-init-tools at depth 6 insserv: There is a loop between service stop-bootlogd and mountoverflowtmp if started insserv: loop involving service mountoverflowtmp at depth 9 insserv: loop involving service mountall-bootclean at depth 8 insserv: There is a loop at service obmaua if started insserv: There is a loop between service obmaua and ifupdown-clean if started insserv: loop involving service ifupdown-clean at depth 6 insserv: There is a loop at service stop-bootlogd if started insserv: loop involving service obmaua at depth 1 insserv: loop involving service mtab at depth 7 insserv: exiting now without changing boot order! update-rc.d: error: insserv rejected the script header dpkg: error processing ntp (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ntp localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Check integrity of Debian system after possible rootkit?

    - by artvolk
    Good day! I have a system that was possible rootkited (the IRC bot was installed and +ai attributes were set on /usr/bin, /usr/sbin, /bin, /sbin). The IRC bots were deleted and system was upgraded to 5.0.4 from 4.0. I'm afraid that something in folders I've mentioned was modified. I can't reinstall the box, so if there any way to check integrity of the system? P.S. I have already checked rkhunter and chrootkit. Thanks in advance!

    Read the article

  • Problem upgrading kernel on debian 3.1

    - by exhuma
    Hi, I have a quite old box in a remote server farm. So I have no direct access. Only remote SSH (and via SSH to a serial console). I haven't updated this box in ages. Now, whenever I want to install a new package, a dependency to glibc appears. Unfortunately, the install of glibc depends on a 2.6 kernel and I am running a venerable 2.4 kernel (one more reason to upgrade). The problem is, that the install of a new kernel has an indirect (over locales) dependency to glibc. So, to install glibc, I need a new kernel. For a new kernel, I need to upgrade glibc. Essentially I am blocked. What's the best way to proceed considering I have no "hardware" access? Here's a quick transcript of the upgrade process: [green:~]% sudo aptitude install linux-image-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done The following packages are unused and will be REMOVED: gcc-4.3-base The following NEW packages will be automatically installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 module-init-tools yaird The following packages have been kept back: adduser apache2 apache2-mpm-prefork apache2-utils apache2.2-common apt apt-utils aptitude autoconf autotools-dev awstats base-files base-passwd [...snip...] util-linux vacation vim vim-common wamerican wbritish wget whiptail whois wwwconfig-common zlib1g The following NEW packages will be installed: dash libc6-i686 libparse-recdescent-perl linux-image-2.6-686 linux-image-2.6.18-6-686 linux-image-686 module-init-tools yaird The following packages will be upgraded: hotplug libc6 2 packages upgraded, 8 newly installed, 1 to remove and 277 not upgraded. Need to get 0B/22.7MB of archives. After unpacking 52.1MB will be used. Do you want to continue? [Y/n/?] Writing extended state information... Done Preconfiguring packages ... (Reading database ... 34065 files and directories currently installed.) Preparing to replace libc6 2.3.6.ds1-13 (using .../libc6_2.7-18lenny2_i386.deb) ... Checking for services that may need to be restarted... Checking init scripts... WARNING: init script for postgresql not found. [ --- libc6 config screen appears here --- ] WARNING: POSIX threads library NPTL requires kernel version 2.6.8 or later. If you use a kernel 2.4, please upgrade it before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add etch sources to your /etc/apt/sources.list and run: apt-get install -t etch linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb (--unpack): subprocess pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.7-18lenny2_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Ack! Something bad happened while installing packages. Trying to recover: dpkg: dependency problems prevent configuration of locales: locales depends on glibc-2.7-1; however: Package glibc-2.7-1 is not installed. dpkg: error processing locales (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: locales Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done Now, if I follow the instrunctions as promted I get the following. Note that I am using aptitude instead of apt-get to benefit from the better dependency tracking. I did try with apt-get first. But that let me to the same problem. [green:~]% sudo aptitude install -t etch linux-image-2.6.26-2-686 Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done E: Unable to correct problems, you have held broken packages. E: Unable to correct dependencies, some packages cannot be installed E: Unable to resolve some dependencies! Some packages had unmet dependencies. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following packages have unmet dependencies: linux-image-2.6.26-2-686: Depends: initramfs-tools (>= 0.55) but it is not installable or yaird (>= 0.0.13) but it is not installable or linux-initramfs-tool which is a virtual package. Any ideas?

    Read the article

  • apache2 slow responding (debian)

    - by baloo
    I'm running an apache2 2.2.9 webserver with modpython and mpm_worker_module. The current config for the mpm is ServerLimit 32 StartServers 10 MaxClients 800 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 The server has 1G of ram and a 100Mbit connection. Checking netstat -na | grep ESTABLISHED | wc -l gives me a number between 50 - 60. The load is about 1.0 Every pageload is also cached by memcached. I can't see why the server is so slow in responding to new connections, sometimes droping them completely? Also tried disabling iptables to make sure it's not because of a full state table or something like that. The only thing in dmesg is a lot of spam about "TCP: Treason uncloaked!"

    Read the article

  • How to install pecl uploadprogress on Debian Lenny

    - by kidrobot
    I am getting this output/error for # pecl install uploadprogress downloading uploadprogress-1.0.1.tgz ... Starting to download uploadprogress-1.0.1.tgz (8,536 bytes) .....done: 8,536 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 building in /var/tmp/pear-build-root/uploadprogress-1.0.1 running: /tmp/pear/temp/uploadprogress/configure checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. ERROR: `/tmp/pear/temp/uploadprogress/configure' failed php-pear is installed. I'm stumped.

    Read the article

  • Trying to install Rmagick on Debian

    - by Janak
    One of things you need to do to get Rmagick installed apt-get install libmagick9-dev When I try that I get the following errors Reading package lists... Done Building dependency tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: libmagick9-dev: Depends: libjpeg62-dev but it is not going to be installed Depends: libbz2-dev but it is not going to be installed Depends: libtiff4-dev but it is not going to be installed Depends: libwmf-dev (>= 0.2.7-1) but it is not going to be installed Depends: libz-dev Depends: libpng12-dev but it is not going to be installed Depends: libfreetype6-dev but it is not going to be installed Depends: libexif-dev but it is not going to be installed Depends: libdjvulibre-dev but it is not going to be installed Depends: librsvg2-dev but it is not going to be installed Depends: libgraphviz-dev but it is not going to be installed E: Broken packages I don't know what to do to fix this? EDIT 1: I tried sudo apt-get install librmagick-ruby and it worked fine but then I needed to install the fleximage gem gem1.8 install fleximage and I got the following error message Building native extensions. This could take a while... ERROR: Error installing fleximage: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for Ruby version >= 1.8.5... yes checking for cc... yes checking for Magick-config... no Can't install RMagick 2.12.2. Can't find Magick-config in /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/var/lib/gems/1.8/bin *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/rmagick-2.12.2 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/rmagick-2.12.2/ext/RMagick/gem_make.out

    Read the article

  • Update openssl in debian squeeze

    - by PiTheNumber
    There is this CVE-2014-0224 bug in openssl so I would like to update my affected # openssl version OpenSSL 0.9.8o 01 Jun 2010 But there is no update for squeeze. I read the it is already fixed in squeeze-LTS. What I am supposed to do? Will there be an fix for squeeze and I just need to wait? Should I install an openssl update manually? How? I tried to install openssl-0.9.8za and openssl-1.0.1h with wget, ./config, make, make install but openssl version is still that same. I also tried config parameters but with this build fails.

    Read the article

  • debian/ubuntu locales and language settings

    - by AndreasT
    This self-answered question solves the following issues: locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory and some other locale related problems.

    Read the article

  • Debian Harddrive Fdisk - Same ID's and changing letters

    - by James Willson
    I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

    Read the article

  • Debian Harddrive Fdisk - Same ID's and changing letters

    - by James Willson
    I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

    Read the article

  • How to Enable IPtables TRACE Target on Debian Squeeze (6)

    - by bernie
    I am trying to use the TRACE target of IPtables but I can't seem to get any trace information logged. I want to use what is described here: Debugger for Iptables. From the iptables man for TRACE: This target marks packes so that the kernel will log every rule which match the packets as those traverse the tables, chains, rules. (The ipt_LOG or ip6t_LOG module is required for the logging.) The packets are logged with the string prefix: "TRACE: tablename:chain- name:type:rulenum " where type can be "rule" for plain rule, "return" for implicit rule at the end of a user defined chain and "policy" for the policy of the built in chains. It can only be used in the raw table. I use the following rule: iptables -A PREROUTING -t raw -p tcp -j TRACE but nothing is appended either in /var/log/syslog or /var/log/kern.log! Is there another step missing? Am I looking in the wrong place? edit Even though I can't find log entries, the TRACE target seems to be set up correctly since the packet counters get incremented: # iptables -L -v -t raw Chain PREROUTING (policy ACCEPT 193 packets, 63701 bytes) pkts bytes target prot opt in out source destination 193 63701 TRACE tcp -- any any anywhere anywhere Chain OUTPUT (policy ACCEPT 178 packets, 65277 bytes) pkts bytes target prot opt in out source destination edit 2 The rule iptables -A PREROUTING -t raw -p tcp -j LOG does print packet information to /var/log/syslog... Why doesn't TRACE work?

    Read the article

  • Adding Extra Hard Drives Debian Fdisk

    - by Belgin Fish
    well I just got a new server and it's a little different than what I'm use to, when I run cfdisk I get WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdd: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdd1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdf'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdf: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdf1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sde: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sde1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Usually it tells me which ones arn't partitioned and stuff, and I only have 6 drives in my server and there's 6 showing up here so I'm only assuming the first ones already mounted and formatted correctly? I'm not really sure if anyone would help me out here. Basically I just want to format and mount these drives :)

    Read the article

  • Howto Nginx + git-http-backend + fcgiwrap (Debian Squeeze)

    - by brainsqueezer
    I am trying to setup git-http-backend with Nginx but after 24 hours wasting time and reading everything I could I think this config should work but doesn't. server { listen 80; server_name mydevserver; access_log /var/log/nginx/dev.access.log; error_log /var/log/nginx/dev.error.log; location / { root /var/repos; } location ~ /git(/.*) { gzip off; root /usr/lib/git-core; fastcgi_pass unix:/var/run/fcgiwrap.socket; include /etc/nginx/fastcgi_params2; fastcgi_param SCRIPT_FILENAME /usr/lib/git-core/git-http-backend; fastcgi_param DOCUMENT_ROOT /usr/lib/git-core/; fastcgi_param SCRIPT_NAME git-http-backend; fastcgi_param GIT_HTTP_EXPORT_ALL ""; fastcgi_param GIT_PROJECT_ROOT /var/repos; fastcgi_param PATH_INFO $1; #fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; } } Content of /etc/nginx/fastcgi_params2 fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REMOTE_USER $remote_user; # required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; but config seems not working $ git clone http://mydevserver/git/myprojectname/ Cloning into myprojectname... warning: remote HEAD refers to nonexistent ref, unable to checkout. and I can request an unexistant project and I will get the same answer $ git clone http://mydevserver/git/thisprojectdoesntexist/ Cloning into thisprojectdoesntexist... warning: remote HEAD refers to nonexistent ref, unable to checkout. If I change root to /usr/lib I will get a 403 error and this will be reported to nginx error log: 2011/11/23 15:52:46 [error] 5224#0: *55 FastCGI sent in stderr: "Cannot get script name, is DOCUMENT_ROOT and SCRIPT_NAME set and is the script executable?" while reading response header from upstream, client: 198.168.0.4, server: mydevserver, request: "GET /git/myprojectname/info/refs HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "mydevserver" My main trouble is with the correct root value with this configuration. Maybe there are some permissions problems. Notes: /var/repos/ is owned by www-data and contains folders bit git bare repos. All this works perfectly using ssh. If I go with my browser to http://mydevserver/git/myproject/info/refs it is answered by git-http-backend asking me to send a command. /var/run/fcgiwrap.socket has 777 permissions.

    Read the article

  • Running python script in incrontab in Debian

    - by WilliamMayor
    I have a user, dropbox, that runs the Dropbox daemon, I want to monitor the directories in the Dropbox directory for new files and run a python script when they appear. I have the python script that I know works: $ /home/dropbox/monitor.py Trying to get lock Got lock, waiting for Dropbox to be idle Dropbox idle Finding instructions Done, releasing lock I have an incrontab entry: $ incrontab -l /home/dropbox/Dropbox IN_CREATE /home/dropbox/monitor.py | logger /home/dropbox/test IN_CREATE logger "$$ $@ $# $% $&" When I add a file to the test directory I see the output in /var/log/syslog: $ touch /home/dropbox/test/a $ tail /var/log/syslog ... Nov 9 10:18:27 vps incrond[1354]: (dropbox) CMD (logger "$ /home/dropbox/test a IN_CREATE 256") Nov 9 10:18:27 vps logger: "$ /home/dropbox/test a IN_CREATE 256" ... However, when I add a file to the Dropbox directory the command doesn't seem to run: $ touch /home/dropbox/Dropbox/a $ tail /var/log/syslog ... Nov 9 10:24:16 vps incrond[1354]: (dropbox) CMD (/home/dropbox/monitor.py | logger) ... So the incron daemon notices the new file and the correct command is found to be executed but it never actually gets executed. Nor are there any error messages. It kind of seems like incrontab can only be used to run the most simple of commands. This might be a similar question to: Incrond running but not executing commands CentOS 6.4 but I think that I don't have env problems, every path is absolute. I tried changing .../monitor.py to /usr/bin/python2.7 .../monitor.py just in case but it didn't make any difference.

    Read the article

  • Debian wheezy keyboard shortcut for both opening and closing a terminal

    - by Peter
    I recently installed tilda and I would like to open it and close with the same keyboard shortcut. I wrote little something in bash that closes tilda if it is open and opens tilda when there is no such a process in ps -ef. It looks like this: a=ps -ef | fgrep -i tilda | cut -d' ' -f4 | head -1;if [ $a ] ; then kill $a; else tilda; fi It seems to be working (at least partially) when I commit this in terminal, but when I assign this command to specific keyboard shortcut (for example alt+1) it does nothing. Any suggestions? btw. is it possible to assign this shortcut for button '`' like in Quake?

    Read the article

  • Debian: video problems with VLC

    - by kemp
    I have a problem playing AVI divx files with VLC. Yesterday upon start VLC showed an error message complaining about divx codecs and refused to proceed. Today the player starts but the video is squashed horizontally (it occupies roughly 1/4th of the VLC window which is for the other part black). I'm on an updated testing system, and before yesterday VLC was playing fine. In the meantime - after a recent dist-upgrade - I cannot run X with proprietary ATI drivers anymore, I have to use the FOSS radeonhd ones instead. I don't know if that's related but I thought it could be worth mentioning (and by the way if anyone has suggestions about this problem too, that'd be very much appreciated). How can I fix VLC's problem?

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >