Search Results

Search found 4186 results on 168 pages for 'ember router'.

Page 20/168 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Recommended ADSL/ADSL2 router that supports PPTP VPN dial-out, 802.11n and gigabit ethernet?

    - by Throlkim
    I'm looking for a new router to provide a VPN tunnel for my home network. My plan is to pass all internet traffic over a PPTP VPN provided by the router, which should ensure that the connection stays alive and only passes traffic over that protocol. I'm normally quite a fan of Draytek routers, and their 2710n does seem to feature VPN dial-out but it lacks Gigabit ports (though I can make do with that if the VPN support is good enough). Has anyone got any suggestions or personal experience in a similar setup? I'm happy to consider anything that supports dd-wrt (as I believe that supports VPN-out, though I may be wrong). Bonus points for models available in the UK.

    Read the article

  • What's a good, affortable router that will not give me problems when downloading torrents?

    - by Lirik
    I found several routers on newegg and they're in the $50-60 range, but I'm not sure if they'll handle the number of connections that are created when downloading torrents (100-300 seeds and around 50 peers). My roommate watches netflix movies, my brother and I download torrents, so my NETGEAR router ends up choking on the traffic and I have to restart it quite frequently. I've already posted a couple of questions on the topic and I've come to the conclusion that I need a new router. What are some routers that I should consider (my budget is in the $50 range)?

    Read the article

  • Looking for a router-like web interface for my Debian gateway.

    - by marcusw
    Hey, I need a web interface program for my debian gateway which has the features of a router's one. Specifically, I must be able to easily Forward ports to various clients on the LAN or the router itself (it's also a server) Manage a DHCP server preferably including DHCP reservation for certain MACs Give me a list of the connected DHCP clients (optionally) Show which clients are the most active as far as bandwidth (something like iftop) Alternatively, it could be a graphical app which I could tunnel over ssh. No command line programs please...I'm used to doing this stuff with a point-and-click interface. Not adverse to command-line setup; just need to be able to reconfigure things graphically. Have a working LAMP setup. I've tried webmin, but it didn't satisfy the "easy" part...too many clicks and too many meny options.

    Read the article

  • How to know which revision or router I do have?

    - by Rosamunda
    I´m trying to update my D-link Dir-600 router with the dd-wrt firmware. I´ve searched for it at the site and found that: Revision A1, B1 and B2 are supported, while C isn´t. Now my router has this information on the back: P/N IIR600GNA .... C1G H/W Ver: C1 F/W Ver: 3.01 So I guess the H/W Ver is the revision, and it´s C... so it´s a lost cause? Or maybe because it´s not just C but C1 I could do something with it? Thanks!

    Read the article

  • Do I need a Gigabit router with a 24MB/s down and 7MB/s upload speed cable modem?

    - by djangofan
    Do I need a Gigabit port capable wireless router with a 24MB/s down and 7MB/s upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 MB/s port can easily handle it. Is that true?

    Read the article

  • Can a consumer wireless router act as both a wireless client and access point?

    - by glibdud
    I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

    Read the article

  • How to know which revision or router I do have? [migrated]

    - by Rosamunda
    I´m trying to update my D-link Dir-600 router with the dd-wrt firmware. I´ve searched for it at the site and found that: Revision A1, B1 and B2 are supported, while C isn´t. Now my router has this information on the back: P/N IIR600GNA .... C1G H/W Ver: C1 F/W Ver: 3.01 So I guess the H/W Ver is the revision, and it´s C... so it´s a lost cause? Or maybe because it´s not just C but C1 I could do something with it? Thanks!

    Read the article

  • Using a Token-ring network card instead of a router (?)

    - by John
    I have cable, and the modem only has 1 network plug-in. They said I could buy my own router if I wanted to hook up two computers to it. I have an IBM Turbo 16/4 Token-Ring PC Card 2, which was in the laptop when I bought it, and the laptop also has the typical network plug (not a PC Card). Is there a way I could run the laptop as a server, and plug my desktop into the laptop, so they both have internet without my having to buy a router? (I realize routers are as cheap as $30.) Both computers run Windows XP Pro SP3. (I also have an 10/100 Etherjet Cardbus card (PC Card)). Thanks.

    Read the article

  • How to determine if my router is causing a bottleneck in uploads?

    - by Jimi
    I have a home network with a cheap-o little router with a development server and a few devices hooked up to it. I am finding that backups of my server are taking FOREVER (a week for 60gb) running backups renders my internet connection useless from any other box int he house. I have maxed out the pipe to my house from the ISP (10down, 3up), but is there a way for me to test and see if my router is bottlenecking anything? I feel like 60gb backups shouldn't take this long so any help would be great!

    Read the article

  • Port forwarding stopped working in my Linksys WRT54G2 Linksys router.

    - by user23490
    How to do it again? I had simply forwarded needed ports (e.g. for counter strike, ftp, http etc)) but now with same system, same OS and same router and settings, it's not working. Tried setting router to "factory defaults" and do everything again. However other jobs are being done like it is connecting to my DSL ISP and I can access Internet easily. Still no success. PS. I tried on both Windows and Ubuntu. On Windows I use it for Counter Strike and others (e.g. host my local FTP server) on Ubuntu.

    Read the article

  • VPN Device behind router/firewall

    - by David Steven
    ROUTER A: Peplink 310 serving as the gateway/router/firewall at one location. ROUTER B: Linksys RV082 serving as the gateway/router/firewall at another location. I want to VPN these two locations together. The Peplink has a PPTP server and has proprietary site-to-site vpn if you had another peplink device. The Linksys has an IPsec vpn server. VPN A: I also have another spare linksys rv082. I'm trying to setup the other rv082 (VPN A) behind the peplink (ROUTER A) and get VPN A to talk to ROUTER B. I setup VPN A with a lan ip address and plugged one of it's LAN ports into the LAN. I was able to get to it's web interface fine. On ROUTER A I one-to-one nat mapped one of our public ip's to the LAN IP for VPN A. I opened TCP 50-51 and UDP 500 to VPN A. I configured the VPN settings on VPN A to connect to ROUTER B. I did the opposite for ROUTER B. But the vpn doesn't connect. Then I tried pluging VPN A's wan port into the lan, and gave it another LAN IP. I thought perpahs VPN A didn't want to send VPN traffic out over the LAN and wanted do send it over it's WAN. The vpn still doesn't connect. It what I'm trying to do even possible?

    Read the article

  • Cisco Router - Add a missing MIB file

    - by Jonathan Rioux
    I have a Cisco 881w, and I would like to setup NBAR in my NetFlow Analyzer. But it says that my router misses this MIB in order to allow NFA to poll the router with snmp to get NBAR infos. From the FAQ page of the NetFlow Analyzer website, it responds to my error: Q. I am able to issue the command "ip nbar protocol-discovery" on the router and see the results. But NFA says my router does not support NBAR, Why? A. Earlier version of IOS supports NBAR discovery only on router. So you can very well execute the command "ip nbar protocol-discovery" on the router and see the results. But NBAR Protocol Discovery MIB(CISCO-NBAR-PROTOCOL-DISCOVERY-MIB) support came only on later releases. This is needed for collecting data via SNMP. Please verify that whether your router IOS supports CISCO-NBAR-PROTOCOL-DISCOVERY-MIB. The missing MIB is: CISCO-NBAR-PROTOCOL-DISCOVERY-MIB I found it here: ftp://ftp.cisco.com/pub/mibs/v2/CISCO-NBAR-PROTOCOL-DISCOVERY-MIB.my But how can I add this MIB into the router? The IOS of my router is: c880data-universalk9-mz.151-3.T1.bin

    Read the article

  • Dynamips Virtual Router not pinging external host after bridging

    - by maiky
    I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

    Read the article

  • Why does my Internet slow to a crawl unless I reboot my router every few days?

    - by Lord Torgamus
    A few weeks ago, I noticed that my Internet connection had slowed down to a crawl. I waited a few days hoping it would go away on its own, but it didn't get better. So I asked this question about how to make it faster. The problem went away after I updated to the latest firmware, so I didn't follow up too carefully. But every few days since then, my Internet has slowed down again. Unlike before, all I have to do to fix it is open the router administration page and press the "Reboot" button. Nothing else seems to work, though I'm sure there are options I haven't tried. If it makes a difference, my girlfriend and I both transfer large amounts of data fairly routinely for school (videoconferencing, downloading entire recorded lectures). The router is a Cisco/Linksys 160N V3 that's about a year old. Most of the time, it deals with just two standard Windows 7 laptops. The only thing I came across while searching for answers/dupes was this question, which seems similar superficially, but probably doesn't have the same root issue. Anyways, it's not resolved. What could be causing these slowdowns, and how can I get rid of them?

    Read the article

  • How to run a WebPy server on port 8080 using DDNS of dlink router and to access this site from internet?

    - by nuke1010
    I have two major issue with setting up a web server using my dlink DIR-600L router. Issue 1: I run a WebPy server on port 8080. But the DDNS service providers (like dlinkddns.com or dyndns.org) only allows port 80. I can run the server in port 80 with sudo command. But my server become vulnerable if i give root access. So I tried port forwarding in the router and server. But no use. I don't know if I done that correctly. Issue 2: Even though the server runs on port 80, I can access my site from my local machines only using registered domain names ( say, nikz.dyndns.org). No one on internet cannot load this site even when its totally up. As I observed server log, the request from other clients never reached my server. I need to run this server on port 8080 and i need to access this site from internet. How can I do it? any idea?

    Read the article

  • How to set up multiple SSIDs with bandwidth limiting on a single wireless router?

    - by Rahul Narain
    I have an Asus WL-520GU wireless router connected to a cable modem that I use for wireless internet access in my apartment. I would like to set it up so that it provides two SSIDs: one secured and password-protected for my regular use, and a "guest" SSID that's unsecured but throttled to, say, 10% of the available bandwidth. What is the most straightforward way to do this? I've been looking into DD-WRT and Tomato, both of which support my router. DD-WRT supports setting up multiple SSIDs using the GUI, but I don't know if it's possible to limit the bandwidth of each SSID independently; point #12 in this FAQ thread says it's not possible to limit by day or by MAC address, which is discouraging but not conclusive. Tomato allows bandwidth limits in its QoS settings, going by the screenshot here, but multiple SSID support is still experimental and it doesn't look like it will work with the encryption settings or bandwidth limits in the GUI. I'd like to know a good way to do this which gives me the fewest opportunities for screwing up. I'm no stranger to the command line, if that turns out to be what's necessary, but if so, please explain what the commands are doing because I don't have a good mental model of what needs to happen to set this up.

    Read the article

  • Windows 7 - Wireless Signal Good - Internet Often Says Limited or No Activity

    - by Anthony Trilussa Pizzo
    Hi - I have a New Dell Studio XPS latop that I hooked up in early January of 2010. The Dell Studio XPS laptop is connected to my wireless router (Belkin Wireless N). The router was purchased in Februaru of 2010 because I thought my router was bad (A D-Link router). Comcast is my ISP. Everyday, at random times, the internet will have a good signal (according to the little Win 7 icon on the taskbar) but I will receive a message saying limited or no internet access and I cannot access the internet. I have the internet setup to automatically get an IP and I did the IPCONFIG release / renew but with no success. I even had a WiFi enabled Blackberry right next to my computer and whenever the computer loses an WiFi connection, so does the Blackberry. The router isnt't bad, because the old router did the same thing - giving me limited or no internet access while working sometimes. I also tried using two other laptops in same physical position as my Dell Studio XPS laptop and they have the same problem. I am going crazy trying to figure this out as I have called the Router Company (Belkin), my ISP (Comcast), and my computer maker (Dell). Can anyone offer some suggestions and I can try them as we work through this and maybe one of the suggestion will be right one. Thanks in advance for even reading my problem. I searched for a problem similar to mine on the internet, but I have not been able to keep a steady internet connection. (Side note - I used to have an IBM thinkpad laptop and D - Link router and for years that wireless connection worked FLAWLESSLY, with the same physical set up - the laptop in my bedroom, and the router in the basement.)

    Read the article

  • ZF2: How to get Zend\Navigation inside custom router?

    - by Katan87
    I have custom router and I have to get access to Zend\Navigation inside this custom router. I was googling, asking and searching and no results :/ All I need is to find nodes with 'link' param using Zend\Navigation in my AliasSegment::match function. Here is my module.config.php: 'navigation' => array( // The DefaultNavigationFactory we configured in (1) uses 'default' as the sitemap key 'default' => array( // And finally, here is where we define our page hierarchy 'account' => array( 'label' => 'Account', 'route' => 'node', 'pages' => array( 'home' => array( 'label' => 'Dashboard', 'route' => 'node', 'params' => array( 'id' => '1', 'link' => '/about/gallery' ), ), 'login' => array( 'label' => 'Sign In', 'route' => 'node', 'params' => array( 'id' => '1', 'link' => '/signin' ), ), 'logout' => array( 'label' => 'Sign Out', 'route' => 'node', ), ), ), ), ), [...] 'service_manager' => array( 'factories' => array( 'translator' => 'Zend\I18n\Translator\TranslatorServiceFactory', 'Navigation' => 'Zend\Navigation\Service\DefaultNavigationFactory', ), ), [...] And here is my AliasSegment class: namespace Application\Controller; use Traversable; use Zend\Mvc\Router\Exception; use Zend\Stdlib\ArrayUtils; use Zend\Stdlib\RequestInterface as Request; use Zend\Mvc\Router\Http; class AliasSegment extends \Zend\Mvc\Router\Http\Segment { public function match(Request $request, $pathOffset = null) { //Here i need to have access to Zend\Navigation return parent::match($request, $pathOffset); } }

    Read the article

  • How do you reset a Nexxt 54M Wireless AP Router?

    - by Fernando
    I have this Nexxt router, and I haven't been able to reset it correctly. I pressed the thin button in the back (which you have to press with a pen point or something similar, really slim), but haven't managed to make it work. The CPU, WLAN and power lights go on and remain still. The lights for the connected cables don't turn on...

    Read the article

  • Router has traffic coming in, but it's not going anywhere. What can I do?

    - by dubRun
    Ok so I have a Linksys WRT-54G v4 running the latest version of DD-WRT (just downloaded it last week to try to fix the problem) There is consistently about 750kbs coming into the router but from what I can tell, it's not going anywhere inside the LAN or WLAN. I'm also having alot of network dropouts while I'm listening to music or watching video over the network. The traffic is coming in even if there are no computers on the network (turned them all off) What can I do to fix this problem? Here is a screenshot:

    Read the article

  • Can I use a 4G/LTE router from Japan (Asia) in Norway (Europe)?

    - by Leif
    We are considering to buy a wireless 4G/LTE router (LG L-04D) in Japan. Since we are moving to Norway (Europe) soon, we want something that would also work there (with a new SIM card and service provider, of course). Does anyone know if this device will work in Norway? To my current understanding, there are some frequency standards to consider, but I was not able to find any understandable information. Many thanks in advance.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >