Search Results

Search found 3024 results on 121 pages for 'growth rate'.

Page 20/121 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Alfa AWUS036H USB wireless adapter not recognized

  - by GFiasco

  The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

  Read the article

• PASS Summit 2010 BI Workshop Feedbacks

  - by Davide Mauri

  As many other speakers already did, I’d like to share with the SQL Community the feedback of my PASS Summit 2010 Workshop. For those who were not there, my workshop was the “BI From A-Z” and the main objective of that workshop was to introduce people in the BI world not only from a technical point of view but insist a lot on the methodological and “engineered” approach. The will to put more engineering in the IT (and specially in the BI field) is something that has been growing stronger and stronger in me every day for of this last 5 years since is simply envy the fact that Airbus, Fincatieri, BMW (just to name a few) can create very complex machine “just” using putting people together and giving them some rules to follow (Of course this is an oversimplification but I think you get what I mean). The key point of engineering is that, after having defined the project blueprint, you have the possibility to give to a huge number of people, the rules to follow, the correct tools in order to implement the rules easily and semi-automatically and a way to measure the quality of the results. Could this be done in IT? Very big question, so my scope is now limited to BI. So that’s the main point of my workshop: and entry-level approach to BI (level was 200) in order to allow attendees to know the basics, to understand what tools they should use for which purpose and, above all, a set of rules and tools in order to make a BI solution scalable in terms of people working on it, while still maintaining a very good quality. All done not focusing only on the practice but explaining the theory behind to see how it can help *a lot* to build a correct solution despite the technology used to implement it. The idea is to reach a point where more then 70% of the work done to create a BI solution can be reused even if technologies changes. This is a very demanding challenge nowadays with the coming of Denali and its column-aligned storage and the shiny-new DAX language. As you may understand I was looking forward to get the feedback since you may have noticed that there’s a lot of “architectural” stuff in IT but really nothing on “engineering”. So how the session could be perceived by the attendees was really unknown to me. The feedback could also give a good indication if the need of more “engineering” is something I feel only by myself or if is something more broad. I’m very happy to be able to say that the overall score of 4.75 put my workshop in the TOP 20 session (on near 200 sessions)! Here’s the detailed evaluations: How would you rate the usefulness of the information presented in your day-to-day environment? 4.75 Answer:    # of Responses 3    1         4    12        5    42               How would you rate the Speaker's presentation skills? 4.80 Answer:    # of Responses 3 : 1         4 : 9         5 : 45               How would you rate the Speaker's knowledge of the subject? 4.95 Answer:    # of Responses 4 :  3         5 : 52               How would you rate the accuracy of the session title, description and experience level to the actual session? 4.75 Answer:    # of Responses 3 : 2         4 : 10         5 : 43               How would you rate the amount of time allocated to cover the topic/session? 4.44 Answer:    # of Responses 3 : 7         4 : 17        5 : 31               How would you rate the quality of the presentation materials? 4.62 Answer:    # of Responses 4 : 21        5 : 34 The comments where all very positive. Many of them asked for more time on the subject (or to shorten the very last topics). I’ll make treasure of these comments and will review the content accordingly. We’ll organize a two-day classes on this topic, where also more examples will be shown and some arguments will be explained more deeply. I’d just like to answer a comment that asks how much of what I shown is “universally applicable”. I can tell you that all of our BI project follow these rules and they’ve been applied to different markets (Insurance, Fashion, GDO) with different people and different teams and they allowed us to be “Adaptive” against the customer. The more the rules are well defined and the more there are tools that supports their implementations, the easier is to add new people to the project and to add or change solution features. Think of a car. How come that almost any mechanic can help you to fix a problem? Because they know what to expect. Because there a rules that allow them to identify the problem without having to discover each time how the car has been implemented build. And this is of course also true for car upgrades/improvements. Last but not least: thanks a lot to everyone for coming!

  Read the article

• Fingerprint driver issue hp Pavillion dm4

  - by user108226

  I need a fingerprint scan driver for Pavilion dm4 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0a5c:21e3 Broadcom Corp. Bus 001 Device 004: ID 138a:0018 Validity Sensors, Inc. Bus 002 Device 003: ID 10f1:1a2e Importek

  Read the article

• How Best to Use Your Forum For SEO

  Forums are no exception to this rule, by any means. When you create a forum, you obviously want to attract users who will get the most from your website and actually utilize what you have to offer. It does no good for you to market to the masses and find a 50% success rate when you can market to your specific niche and find a 75% or even 85% success rate.

  Read the article

• What if globals make sense?

  - by Greg

  I've got a value that many objects need. For example, a financial application with different investments as objects, and most of them need the current interest rate. I was hoping to encapsulate my "financial environment" as an object, with the interest rate as a property. But, sibling objects that need that value can't get to it. So how do I share values among many objects without over-coupling my design? Obviously I'm thinking about this wrong.

  Read the article

• Should I charge for travel time as a contractor?

  - by Keith

  Here's a question for all my fellow contractors - I'm paid quite handsomely for my normal contracted hours (any overtime is billed at the same rate) but do you think it fair to bill for travel time to the other end of the country (regional office) when this takes place outside of the normal working day (or overlapping into the evening) as well as actual time holed up in a hotel room when you get there, ready for a normal working day the next day, along with the return journey? Petrol is claimed normally (nominal rate) and hotel is covered by the company I contract for.

  Read the article

• WoW runs faster on GNOME Shell compared to Unity

  - by João Vinholi

  I have been trying to run WoW on Ubuntu 12.04. When I run it on unity, the frame rate is very low and it is impossible to play. Although, when I launch it on gnome shell, for some reason, the frame rate gets very high and the playing experience is very comfortable. The problem is that I prefer running Unity instead of gnome shell, but I like to play WoW too. Is there a way to run WoW on Unity, with no lag?

  Read the article

• Wow is very faster on GNOME Shell comparing to unity

  - by João Vinholi

  I have been trying to run WoW on ubuntu 12.04. When I run it on unity, the frame rate is very low and it is impossible to play. Although, when I launch it on gnome shell, for some reason, the frame rate gets very high and the playing experience is very comfortable. The problem is that I prefer running unity instead of gnome shell, but I like to play WoW too. Is there a way to run WoW on unity, with no lag?

  Read the article

• How to find out console equivalents of Ubuntu System Settings GUI?

  - by user4514

  How do I in general find out, what the very nice "System Settings GUI" in Ubuntu (say 12.04) does and how to replicate the changes in command line? Many people ask questions like "how to change the keyboard rate using command line", and often the answers do not help and are hard to find. What is the easiest way to find out, what the GUI is actually changing (for various types of settings. I.e. keyboard layout, rate, mouse, network, ...)

  Read the article

• Oracle Cloud Services Referral Program Now Available

  - by Cinzia Mascanzoni

  Partners can now take advantage of the five different Cloud Services programs: The Cloud Referral Partner program allows partners to get rewarded for referring Oracle Cloud opportunities to Oracle. The Cloud Services Partner Referral program is an extension of Oracle’s existing referral program but offers a standard 10% referral rate paid on guaranteed revenue with $50K cap. For a limited time, Oracle is offering a 20% referral rate for [offering still being finalized]. Contact your partner manager for more details and click here for more information.

  Read the article

• Should I charge for travel expenses as a contractor?

  - by Keith

  Here's a question for all my fellow contractors - I'm paid quite handsomely for my normal contracted hours (any overtime is billed at the same rate) but do you think it fair to bill for travel time to the other end of the country (regional office) when this takes place outside of the normal working day (or overlapping into the evening) as well as actual time holed up in a hotel room when you get there, ready for a normal working day the next day, along with the return journey? Petrol is claimed normally (nominal rate) and hotel is covered by the company I contract for.

  Read the article

• openvpn TCP/UDP slow SSH/SMB performance

  - by Petr Latal

  I have question about strange behavior of my openVPN configuration on Debian lenny. I have 2 server configs (one proto tcp-server based and one proto udp based). ISP bandwidth is 7Mbit/7Mbit. When I uses proto tcp-server my download server rate is fine around 6,4 Mbit/s, but upload rate is about 3Mbit/s. When I uses proto udp, my download server rate is around 3Mbit/s and upload rate around 6,4Mbit/s. I tried to handle the MTU, MSSFIX and cipher on/off on server and client configs to synchronize rates, but without solution. Here is TCP based SERVER config: mode server tls-server port 1194 proto tcp-server dev tap0 ifconfig 11.10.15.1 255.255.255.0 ifconfig-pool 11.10.15.2 11.10.15.20 255.255.255.0 push "route 192.168.1.0 255.255.255.0" push "dhcp-option DNS 192.168.1.200" push "route-gateway 11.10.15.1" push "dhcp-option WINS 192.168.1.200" route-up /etc/openvpn/routeup.sh duplicate-cn ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key mssfix cipher BF-CBC Here is UDP based SERVER config: port 1194 proto udp dev tun0 local xx.xx.xx.xx server 11.10.15.0 255.255.255.0 ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 duplicate-cn script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key tun-mtu 1500 mssfix 1212 client-to-client ifconfig-pool-persist ipp.txt Here is TCP/UDP based windows CLIENT config: remote xx.xx.xx.xx --socket-flags TCP_NODELAY tls-client port 1194 proto tcp-client #proto udp dev tap #dev tun pull ca ca.crt cert latis.crt key latis.key mute 0 comp-lzo adaptive verb 3 resolv-retry infinite nobind persist-key auth-user-pass auth-nocache script-security 2 mssfix cipher BF-CBC

  Read the article

• ADSL throughput loss from Reed-Solomon encoding

  - by javano

  I'm reading about ADSL starting here and I am confused by how the Reed-Solomon encoding for ECC is limiting the available transfer rate, as much as it does (nearly half). This pdf on the same subject contains the following; A maximum of 255 sub-carriers can be used to modulate data in the downstream direction. Sub-carrier 256, the downstream Nyquist frequency, and sub-carrier 64, the downstream pilot frequency, are not available for user data, thus limiting the total number of available downstream sub-carriers to 254. Each of these 254 sub-carriers can support the modulation of 0 to 15 bits. Since the ADSL DMT data frame rate is 4000 frames per second, the maximum theoretical downstream data rate of an ADSL system is 15.24Mbps. Due to limitations in system architecture, specifically the maximum allowable Reed-Solomon codeword size (255 bytes), the maximum achievable downstream data rate is 8.16Mbps. How is this nearly halving the throughput? Is all that extra bandwidth overhead of the RS encoding? 15240000 bps (15.24Mbps) - 8160000 bps (8.12Mbps) = 7080000 bps (7.08Mbps). Where has that 7Mbps of throughput gone? EDIT: I tried to read the wiki page on Reed-Soloman but it's all crazy maths and algerbra, which I don't understand. I can understand that data is split into 255 byte codewords, because that maybe the max codeword size whilst still maintaining accuracy during transmission; But I don't understand why that means less data is sent?

  Read the article

• Traffic Shaping using tc

  - by Simon

  Hi guys, I have a 1.5 Mbit/s link that i want to share with 150 users. My setup is the following: Linux box with 3 NICs eth0 - public ip eth1 - subnet A - 50 users (static ips) eth2 - subnet B - 100 users (via dhcp) I am using squid as a transparent proxy on port 3128. dhcp server using ports 67 and 68. I was creating, but I think packets are not going to the right queues #!/bin/bash DEV=eth0 RATE_MAIN=2048kbit CEIL_MAIN=2048kbit BURST=1b CBURST=1b RATE_DEFAULT=1024kbit CEIL_DEFAULT=$CEIL_MAIN PRIO_DEFAULT=3 RATE_P2P=1024Kbit CEIL_P2P=$CEIL_MAIN PRIO_P2P=4 RATE_IND=32kbit CEIL_IND=$CEIL_DEFAULT tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate $RATE_MAIN ceil $CEIL_MAIN tc class add dev $DEV parent 1:1 classid 1:10 htb rate $RATE_DEFAULT ceil $CEIL_MAIN burst $BURST cburst $CBURST prio $PRIO_WEB ## some other sub class for p2p other traffic tc class add dev $DEV parent 1:1 classid 1:20 htb rate $RATE_P2P ceil $CEIL_P2P burst $BURST cburst $CBURST prio $PRIO_P2P $IPS_NET1=50 $IPS_NET2=100 let $IPS=$IPS_NET1+$IPS_NET2 for ((i=1; i<= $IPS; i++)) do let CLASSID=($i+100) let HANDLE=($i+100) tc class add dev $DEV parent 1:10 classid 1:$CLASSID htb rate $RATE_IND ceil $CEIL_IND tc qdisc add dev $DEV parent 1:$CLASSID handle $HANDLE: sfq perturb 10 done ## Generate IP addresses ## IP_ADDRESSES="" # Subnet A BASE_IP=10.10.10. for ((i=2; i<=$IPS_NET1+1; i++)) do TEMP="$BASE_IP$i" IP=ADDRESSES="$IP_ADDRESSES $TEMP" done # Subnet B BASE_IP=192.168.0. for ((i=2; i<=$IPS_NET2+1; i++)) do TEMP="$BASE_IP$i" IP_ADDRESSES="$IP_ADDRESSES $TEMP" done ## FILTERS ## j=1 U32="tc filter add dev $DEV protocol ip parent 1:0 prio $PRIO_DEFAULT u32" for NET in $IP_ADDRESSES; do let CLASSID=($j+100) $U32_DEFAULT match ip src $NET/32 flowid 1:$CLASSID $U32_DEFAULT match ip dst $NET/32 flowid 1:$CLASSID let j=j+1 done Can you guys help me figure out what's wrong with it? basically I want my classes to be 1:1 (1.5 Mbit ) 1:10 (1024 Kbit) 1:20 (1024 Kbit) (200 ips each with 32 kbit)

  Read the article

• Formatting an external HDD stuck at 70%

  - by mahmood

  My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

  Read the article

• ffmpeg: converting an avi to a reduced, shareable flv/mp4...

  - by meder

  I recently followed a guide and recompiled my ffmpeg so x264 is enabled. I used some generic settings to convert my 700 MB avi file to a mp4 file, the result was a 407MB mp4 file. The original avi file's settings: Codec: DX50 Resolution: 704x304 Frame rate: 23.976023 Stream 1 Codec: mpga Type: Audio Channels: 2 Sample rate: 48000 Hz Bitrate 179 kb/s Command I used: ffmpeg -i input.avi -acodec libfaac -ab 128k -ac 2 -vcodec libx264 -vpre hq -crf 22 -threads 0 output.mp4 The settings of the output file (output.mp4): Codec: avc1 Resolution: 704x304 Display resolution: 704x304 Frame rate: 11.988011 Stream 1 Codec: mp4a Type: Audio Channels: 2 Sample Rate: 48000 Hz Bits per sample: 16 Bitrate: 1536 kb/s The quality of the output mp4 is pretty nice, it seems as if it's pretty much the same as the original source. However, I'm trying to reduce the filesize and I'm not really sure whether I should go with an flv format or keep it mp4. The advantage the flv would have obviously is that it would be playable with a flash player ( I have come across some swf players which take a flash parameter to play an flv file ).. but maybe I could use the video element, as I'm only going to be displaying this video privately so I don't have to worry about supporting legacy browsers such as IE. Can someone recommend some settings to specify in order for the filesize to be around ~100-150MB or so? I don't mind a reduction in quality, nor do I mind resizing it - I was going to do it initially but I wasn't sure what the guidelines were ( if any ) for dealing with resolution.. since this video's is 704x304 would it still be ok if I forced it into one that isn't perfectly fit for the aspect ratio? I have no clue about that part. I realize that I could have probably specified 28 instead of 22 for the CRF, I'm not sure if I should do that as opposed to maybe specifying smaller resolution, which might make it smaller as well?

  Read the article

• avconv gets killed if mkv has subtitles

  - by Lukas Knuth

  What I'm trying to do is to take a movie (in an Matroska container), convert all audio tracks to AC3 and don't touch anything else. I'm using this line: avconv -i infile.mkv -map 0 -vcodec copy -scodec copy -acodec ac3 -ab 256k outfile.mkv This works fine, except when there are subtitles embedded. Then, after some time processing with no progress, avconv just "dies" (output shortened, these seem to be the interesting parts): [matroska,webm @ 0xf867a0] max_analyze_duration reached [matroska,webm @ 0xf867a0] Estimating duration from bitrate, this may be inaccurate ... Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' ... Stream #0.0(eng): Video: H264 / 0x34363248, yuv420p, 1280x536 [PAR 1:1 DAR 160:67], q=2-31, 1k tbn, 1k tbc (default) Stream #0.1(ger): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s (default) Stream #0.2(eng): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s Stream #0.3(ger): Subtitle: dvdsub (default) (forced) Metadata: title : forced Stream #0.4(ger): Subtitle: dvdsub Metadata: title : complete Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1 -> #0:1 (dca -> ac3) Stream #0:2 -> #0:2 (dca -> ac3) Stream #0:3 -> #0:3 (copy) Stream #0:4 -> #0:4 (copy) Input stream #0:2 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 Input stream #0:1 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 frame= 2606 fps=1303 q=-1.0 size= 3kB time=107.36 bitrate= 0.2kbits/s ... frame=96141 fps=813 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s frame=96251 fps=810 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s ... frame=97015 fps=397 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s Getötet ["Killed", in English] I have no idea why this happens, as there is no error-output. I'd like to just copy the subtitles over, not touch them at all. If that won't work, they can be completely dropped.

  Read the article

• What does this diagnostic output mean?

  - by ChrisF

  I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

  Read the article

• Thecus N5200, disk has dropped out of RAID5

  - by Anders Ekdahl

  We have a Thecus 5200 NAS here at work with five WD Caviar Black 2TB disks in a RADI5 array. Yesterday, disk 4 dropped out of the array, and in the NAS web interface there's a warning about the RAID array being "degraded". When I go into Storage - Disks, disk 1 and 4 has a warning next to them. When I click on the warnings, this information about the disks are displayed: Tray Number 4 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 34 Reallocated Sector Count 66 Current Pending Sector 1447 Raw Read Error Rate 61 Seek Error Rate 0 Hardware ECC Recovered N/A Tray Number 1 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 32 Reallocated Sector Count 0 Current Pending Sector 1465 Raw Read Error Rate 0 Seek Error Rate 0 Hardware ECC Recovered N/A I'm not really an expert on either disks or RAID arrays. Does this indicate that the fourth disk is damaged, and needs to be replaced? And what about disk number one? It has a warning, but it's still in the array. Is it safe to add the fourth disk back into the array as a spare? I can't find any way to add it back as a it were before.

  Read the article

• Where do vendors publish internal transfer rates of HDDs?

  - by red888

  So I've started to dig into storage fundamentals and found that in order to calculate the IOPS of a HDD you need to know the internal transfer rate of the drive (time it takes data to move from the platters to internal disk's cache). I went on newegg and even a few vendor sites and could not find this info published for any HDDs. Is it sometimes called something else? Take this link to a seagate HDD for instance. Nowhere do I see "internal transfer rate", but I do see something called "Sustained Data Rate OD"- is that the same thing? Just so you know where I'm getting this info (Book: "Information Storage and Management Storing, Managing..."): Consider an example with the following specifications provided for a disk: The average seek time is 5 ms in a random I/O environment; therefore, T = 5 ms. Disk rotation speed of 15,000 revolutions per minute or 250 revolutions per second — from which rotational latency (L) can be determined, which is one-half of the time taken for a full rotation or L = (0.5/250 rps expressed in ms). 40 MB/s internal data transfer rate, from which the internal transfer time (X) is derived based on the block size of the I/O — for example, an I/O with a block size of 32 KB; therefore X = 32 KB/40 MB. Consequently, the time taken by the I/O controller to serve an I/O of block size 32 KB is (TS) = 5 ms + (0.5/250) + 32 KB/40 MB = 7.8 ms. Therefore, the maximum number of I/Os serviced per second or IOPS is (1/TS) = 1/(7.8 × 10^-3) = 128 IOPS.

  Read the article

• drop down and post data to data base

  - by DAFFODIL

  This is a form which retrieves data from db and displays them in table. At the beginning of each row there will be a check box. If there are 10 rows fetched, I ii check 5 rows and insert them in to diff db but here when, I click drop down box data is getting in to db automatically,bcoz I use onchange event. Any alternative to prevent this to happen. Data should be inserted only when, I click submit button. Any help will be appreciated <?php $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); error_reporting(E_ALL ^ E_NOTICE); $nam=$_REQUEST['select1']; $row=mysql_query("select * from inv where name='$nam'"); while($row1=mysql_fetch_array($row)) { $Name=$row1['Name']; $Address =$row1['Address']; $City=$row1['City']; $Pincode=$row1['Pincode']; $No=$row1['No']; $Date=$row1['Date']; $DCNo=$row1['DCNo']; $DcDate=$row1['DcDate']; $YourOrderNo=$row1['YourOrderNo']; $OrderDate=$row1['OrderDate']; $VendorCode=$row1['VendorCode']; $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; } ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <script type="text/javascript"> function ram(id) { var q=document.getElementById('qty_'+id).value; var r=document.getElementById('rate_'+id).value; document.getElementById('amt_'+id).value=q*r; } </script> </head> <body> <form id="form1" name="form1" method="post" action=""> <table width="1315" border="0"> <script type="text/javascript"> function g() { form1.submit(); } </script> <tr> <th>Name</th> <th align="left"><select name="select1" onchange="g();"> <option value="" selected="selected">select</option> <?php $row=mysql_query("select Name from inv "); while($row1=mysql_fetch_array($row)) { ?> <option value="<?php echo $row1['Name'];?>"><?php echo $row1['Name'];?></option> <?php } ?> </select></th> </tr> <tr> <th>Address</th> <th align="left"><textarea name="Address"><?php echo $Address;?></textarea></th> </tr> <tr> <th>City</th> <th align="left"><input type="text" name="City" value='<?php echo $City;?>' /></th> </tr> <tr> <th>Pincode</th> <th align="left"><input type="text" name="Pincode" value='<?php echo $Pincode;?>'></th> </tr> <tr> <th>No</th> <th align="left"><input type="text" name="No2" value='<?php echo $No;?>' readonly="" /></th> </tr> <tr> <th>Date</th> <th align="left"><input type="text" name="Date" value='<?php echo $Date;?>' /></th> </tr> <tr> <th>DCNo</th> <th align="left"><input type="text" name="DCNo" value='<?php echo $DCNo;?>' readonly="" /></th> </tr> <tr> <th>DcDate:</th> <th align="left"><input type="text" name="DcDate" value='<?php echo $DcDate;?>' /></th> </tr> <tr> <th>YourOrderNo</th> <th align="left"><input type="text" name="YourOrderNo" value='<?php echo $YourOrderNo;?>' readonly="" /></th> </tr> <tr> <th>OrderDate</th> <th align="left"><input type="text" name="OrderDate" value='<?php echo $OrderDate;?>' /></th> </tr> <tr> <th width="80">VendorCode</th> <th width="1225" align="left"><input type="text" name="VendorCode" value='<?php echo $VendorCode;?>' readonly="" /></th> </tr> </table> <table width="1313" border="0"> <tr> <td width="44">&nbsp;</td> <td width="71">SNO</td> <td width="527">DESCRIPTION</td> <td width="214">QUANTITY</td> <td width="214">RATE/UNIT</td> <td width="217">AMOUNT</td> </tr> <?php $i=1; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; ?> <tr> <td><input type="checkbox" name="checkbox" value="checkbox" checked="checked"/></td> <td><input type="text" name="No[<?php echo $i?>]" value='<?php echo $SNo;?>' readonly=""/></td> <td><input type="text" name="descofgoods[<?php echo $i?>]" value='<?php echo $descofgoods;?>' /></td> <td><input type="text" name="qty[<?php echo $i?>]" maxlength="50000000" id="qty_<?PHP echo($i) ?>"/></td> <td><input type="text" name="Rate[<?php echo $i?>]" value='<?php echo $Rate;?>' id="rate_<?PHP echo($i) ?>" onclick="ram('<?PHP echo($i) ?>')";></td> <td><input type="text" name="Amount[<?php echo $i?>]" id="amt_<?PHP echo($i) ?>"/></td> </tr> <?php $i++;} ?> <tr> <td><input type="submit" value="submit" header("location:values to be brought for print page.php");/></td> </tr> </table> <label></label> </form> </body> </html> <?php /*error_reporting(E_ALL ^ E_NOTICE); $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); /*if(checked=checkbox) { mysql_query="INSERT INTO invo (Name, Address, City, Pincode, No, Date, DCNo, DcDate, YourOrderNo, OrderDate, VendorCode, SNo, descofgoods, Qty, Rate, Amount) VALUES ('$_POST[Name]','$_POST[Address]','$_POST[City]','$_POST[Pincode]','$_POST[No]','$_POST[Date]','$_POST[DCNo]','$_POST[DcDate]','$_POST[YourOrderNo]','$_POST[OrderDate]','$_POST[VendorCode]','$_POST[SNo]','$_POST[descofgoods]','$_POST[qty]','$_POST[Rate]','$_POST[Amount]')"; } else { header("location:values to be brought for print page.php"); }*/ header("ins.php"); ?>

  Read the article

• Multiplying values using javascript

  - by DAFFODIL

  i have used js to multiply but only 1st row is getting multiplied other rows are nt getting multiplied. <?php $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); error_reporting(E_ALL ^ E_NOTICE); $nam=$_REQUEST['select1']; $row=mysql_query("select * from inv where name='$nam'"); while($row1=mysql_fetch_array($row)) { $Name=$row1['Name']; $Address =$row1['Address']; $City=$row1['City']; $Pincode=$row1['Pincode']; $No=$row1['No']; $Date=$row1['Date']; $DCNo=$row1['DCNo']; $DcDate=$row1['DcDate']; $YourOrderNo=$row1['YourOrderNo']; $OrderDate=$row1['OrderDate']; $VendorCode=$row1['VendorCode']; $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; } ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <script type="text/javascript"> **function ram() { var q=document.getElementById('qty').value; var r=document.getElementById('rate').value; document.getElementById('amt').value=q*r; }** </script> </head> <body> <form id="form1" name="form1" method="post" action=""> <table width="1315" border="0"> <script type="text/javascript"> function g() { form1.submit(); } </script> <tr> <th>Name</th> <th align="left"><select name="select1" onchange="g();"> <option value="" selected="selected">select</option> <?php $row=mysql_query("select Name from inv "); while($row1=mysql_fetch_array($row)) { ?> <option value="<?php echo $row1['Name'];?>"><?php echo $row1['Name'];?></option> <?php } ?> </select></th> </tr> <tr> <th>Address</th> <th align="left"><textarea name="Address"><?php echo $Address;?></textarea></th> </tr> <tr> <th>City</th> <th align="left"><input type="text" name="City" value='<?php echo $City;?>' /></th> </tr> <tr> <th>Pincode</th> <th align="left"><input type="text" name="Pincode" value='<?php echo $Pincode;?>'></th> </tr> <tr> <th>No</th> <th align="left"><input type="text" name="No2" value='<?php echo $No;?>' readonly="" /></th> </tr> <tr> <th>Date</th> <th align="left"><input type="text" name="Date" value='<?php echo $Date;?>' readonly="" /></th> </tr> <tr> <th>DCNo</th> <th align="left"><input type="text" name="DCNo" value='<?php echo $DCNo;?>' readonly="" /></th> </tr> <tr> <th>DcDate:</th> <th align="left"><input type="text" name="DcDate" value='<?php echo $DcDate;?>' /></th> </tr> <tr> <th>YourOrderNo</th> <th align="left"><input type="text" name="YourOrderNo" value='<?php echo $YourOrderNo;?>' readonly="" /></th> </tr> <tr> <th>OrderDate</th> <th align="left"><input type="text" name="OrderDate" value='<?php echo $OrderDate;?>' readonly="" /></th> </tr> <tr> <th width="80">VendorCode</th> <th width="1225" align="left"><input type="text" name="VendorCode" value='<?php echo $VendorCode;?>' readonly="" /></th> </tr> </table> <table width="1313" border="0"> <tr> <td width="44">&nbsp;</td> <td width="71">SNO</td> <td width="527">DESCRIPTION</td> <td width="214">QUANTITY</td> <td width="214">RATE/UNIT</td> <td width="217">AMOUNT</td> </tr> <?php $i=1; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; ?> <tr> <td><input type="checkbox" name="checkbox" value="checkbox" /></td> <td><input type="text" name="No" value='<?php echo $No;?>' readonly=""/></td> <td><input type="text" name="descofgoods" value='<?php echo $descofgoods;?>' /></td> <td><input type="text" name="qty" maxlength="50000000" id="qty"/></td> <td><input type="text" name="Rate" value='<?php echo $Rate;?>' id="rate" onclick="ram()";></td> <td><input type="text" name="Amount" id="amt"/></td> </tr> <?php $i++;} ?> <tr> <th colspan="2"><a href="pp.php?msg=<?php echo $nam;?>">Print</a></th> </tr> </table> <label></label> </form> </body> </html>

  Read the article

• Off The Beaten Path—Three Things Growing Midsize Companies are Thankful For

  - by Christine Randle

  By: Jim Lein, Senior Director, Oracle Accelerate Last Sunday I went on a walkabout.  That’s when I just step out the door of my Colorado home and hike through the mountains for hours with no predetermined destination. I favor “social trails”, the unmapped routes pioneered by both animal and human explorers.  These tracks  are usually more challenging than established, marked routes and you can’t be 100% sure of where you’re going to end up. But I’ve found the rewards to be much greater. For awhile, I pondered on how—depending upon your perspective—the current economic situation worldwide could be viewed as either a classic “the glass is half empty” or a “the glass is half full” scenario. Midsize companies buy Oracle to grow and so I’m continually amazed and fascinated by the success stories our customers relate to me.  Oracle’s successful midsize companies are growing via innovation, agility, and opportunity. For them, the glass isn’t half full—it’s overflowing. Growing Midsize Companies are Thankful for: Innovation The sun angling through the pine trees reminded me of a conversation with a European customer a year ago May.  You might not recognize the name but, chances are, your local evening weather report relies on this company’s weather observation, monitoring and measurement products.  For decades, the company was recognized in its industry for product innovation, but its recent rapid growth comes from tailoring end to end product and service solutions based on the needs of distinctly different customer groups across industrial, public sector, and defense sectors.  Hours after that phone call I was walking my dog in a local park and came upon a small white plastic box sprouting short antennas and dangling by a nylon cord from a tree branch.  I cut it down. The name of that customer’s company was stamped on the housing. “It’s a radiosonde from a high altitude weather balloon,” he told me the next day. “Keep it as a souvenir.”  It sits on my fireplace mantle and elicits many questions from guests. Growing Midsize Companies are Thankful for: Agility In July, I had another interesting discussion with the CFO of an Asia-Pacific company which owns and operates a large portfolio of leisure assets. They are best known for their epic outdoor theme parks. However, their primary growth today is coming from a chain of indoor amusement centers in the USA where billiards, bowling, and laser tag take the place of roller coasters, kiddy rides, and wave pools. With mountains and rivers right out my front door, I’m not much for theme parks, but I’ll take a spirited game of laser tag any day.  This company has grown dramatically since first implementing Oracle ERP more than a decade ago. Their profitable expansion into a completely foreign market is derived from the ability to replicate proven and efficient best business practices across diverse operating environments.  They recently went live on Oracle’s Fusion HCM and Taleo. Their CFO explained to me how, with thousands of employees in three countries, Fusion HCM and Taleo would enable them to remain incredibly agile by acting on trends linking individual employee performance to their management, establishing and maintaining those best practices. Growing Midsize Companies are Thankful for: Opportunity I have three GPS apps on my iPhone. I use them mainly to keep track of my stats—distance, time, and vertical gain. However, every once in awhile I need to find the most efficient route back home before dark from my current location (notice I didn’t use the word “lost”). In August I listened in on an interview with the CFO of another European company that designs and delivers telematics solutions—the integrated use of telecommunications and informatics—for managing the mobile workforce. These solutions enable customers to achieve evolutionary step-changes in their performance and service delivery. Forgive the overused metaphor, but this is route optimization on steroids.  The company’s executive team saw an opportunity in this emerging market and went “all in”. Consequently, they are being rewarded with tremendous growth results and market domination by providing the ability for their clients to collect and analyze performance information related to fuel consumption, service workforce safety, and asset productivity. This Thanksgiving, I’m thankful for health, family, friends, and a career with an innovative company that helps companies leverage top tier software to drive and manage growth. And I’m thankful to have learned the lesson that good things happen when you get off the beaten path—both when hiking and when forging new routes through a complex world economy. Halfway through my walkabout on Sunday, after scrambling up a long stretch of scree-covered hill, I crested a ridge with an obstructed view of 14,265 ft Mt Evans just a few miles to the west.  There, nowhere near a house or a trail, someone had placed a wooden lounge chair. Its wood was worn and faded but it was sturdy. I had lunch and a cold drink in my pack. Opportunity knocked and I seized it. Happy Thanksgiving.  

  Read the article

• Meet our 2009 Oracle Graduates in South Africa

  - by anca.rosu

  Focusing on the broader Oracle community, Oracle South Africa initiated its first skills development programme in May 1988. Since its inception the programme has developed and improved and every year more graduates are taken on board. The Oracle Graduate Programme is made up of specific learning paths designed around customer, partner and Oracle specifications and is structured to meet the urgent skills requirements in the Oracle “economy”. The training programmes have a specific duration and incorporate both theoretical and practical application of Oracle product sets. It is aimed at creating: Meaningful employment for graduates; Learning opportunities for individuals within the organization so that career growth opportunities are exploited to the fullest; Capacity building for small enterprises which is aligned to Oracle’s Enterprise Development Programme Meet our five graduates who joined us in December 2008 and have spent over a year with us! Let’s get their initial feedback on the graduate programme and on their assignment to Jordan. Lector   On the Oracle Graduate Programme: “The Oracle Graduate Programme is an experience of a life time. I would not trade it for anything. It’s challenging and rewarding. I am proud and happy to be in an organization like Oracle” On the assignment in Jordan: "Friendly, welcoming people, world class instructors always willing to go the extra mile. What more can you ask for?"   Lungile On the Oracle Graduate Programme: “I joined Oracle as part of the graduate intake for pre-sales in order to develop my skills and knowledge. Working at Oracle has been an overwhelmingly positive experience as it has encouraged me to progress with my personal development. I am hugely grateful. It has been a great challenge and an awesome opportunity.” On the assignment to Jordan: “Going to Jordan was a great opportunity and the experience of a lifetime. The people were very welcoming and friendly. The culture was totally different from ours - the food, the clothes and the weather. It was an amazingly different experience to work from Sunday to Thursday with Friday and Saturday as the weekend.” Thabo On the Oracle Graduate Programme: “Life is an infinite learning path. I truly value growth. I believe for one to grow, one needs to be challenged to your full potential. The Oracle Graduate Programme offers real growth – and so much more.” On the assignment to Jordan: “I was amazed by the cultural differences. I now understood that to be part of the global community, I must embrace our similarities and understand our differences.”   Albeauty On the Oracle Graduate Programme: “Responsibility, dedication, focus and taking initiative … these are the key points I learned from Oracle. It is such an honour to finally be part of the Oracle family. The graduate programme itself was a great experience as I managed to learn how Oracle operates – it has been the highlight of my year. I believe that my hard work will assist in the growth of the company.” On the Jordan assignment: “A memory worth embracing. Going to Jordan was a great opportunity as I learned a lot with respect to integration between different cultures and getting to adapt to all things different. I, along with almost every other graduate, discovered that Oracle is far more than a database company. Now I know there is far more to the ‘Big Red’ name.” Emmanuel On the Oracle Graduate Programme: “The programme gave me invaluable exposure to the ICT sector and also provided an opportunity to travel, network and exchange ideas with others. The formal training helped me to improve my presentation skills and gave me a better understanding of business etiquette and communication.” On the assignment to Jordan: “It was my first trip abroad. It was a great chance to get to know each other. I had the opportunity to share ideas, share personal stuff as a team. We met experts who gave us superb training in Oracle Technologies. It was great.”   If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com.   Technorati Tags: Oracle community,South Africa,Graduate Programme,Jordan,Technologies

  Read the article

• CISDI Cloud - Industrial Cloud Computing Platform based on Oracle Products

  - by Wenyu Duan

  In today's era, Cloud Computing is becoming integral to the vision and corporate strategy of leading organizations and is often seen as a key business driver to achieve growth and innovation. Headquartered in Chongqing, China, CISDI Engineering Co., Ltd. is a large state-owned engineering company, offering consulting, engineering design, EPC contracting, and equipment integration services to steel producers all over the world. With over 50 years of experience, CISDI offers quality services for every aspect of production for projects in the metal industry and the company has evolved into a leading international engineering service group with 18 subsidiaries providing complete lifecycle for E&C projects. CISDI group delegation led by Mr. Zhaohui Yu, CEO of CISDI Group, Mr. Zhiyou Li, CEO of CISDI Info, Mr. Qing Peng, CTO of CISDI Info and Mr. Xin Xiao, Head of CISDI Info's R&D joined Oracle OpenWorld 2012 and presented a very impressive cloud initiative case in their session titled “E&C Industry Solution in CISDI Cloud - An Industrial Cloud Computing Platform Based on Oracle Products”. CISDI group plans to expand through three phases in the construction of its cloud computing platform: first, it will relocate its existing technologies to Oracle systems, along with establishing private cloud for CISDI; secondly, it will gradually provide mixed cloud services for its subsidiaries and partners; and finally it plans to launch an industrial cloud with a highly mature, secure and scalable environment providing cloud services for customers in the engineering construction and steel industries, among others. “CISDI Cloud” will become the growth engine for the organization to expand its global reach through online services and achieving the strategic objective of being the preferred choice of E&C companies worldwide. The new cloud computing platform is designed to provide access to the shared computing resources pool in a self-service, dynamic, elastic and measurable way. It’s flexible and scalable grid structure can support elastic expansion and sustainable growth, and can bring significant benefits in speed, agility and efficiency. Further, the platform can greatly cut down deployment and maintenance costs. CISDI delegation highlighted these points as the key reasons why the group decided to have a strategic collaboration with Oracle for building this world class industrial cloud - - Oracle’s strategy: Open, Complete and Integrated - Oracle as the only company who can provide engineered system, with complete product chain of hardware and software - Exadata, Exalogic, EM 12c to provide solid foundation for "CISDI Cloud" The cloud blueprint and advanced architecture for industrial cloud computing platform presented in the session shows how Oracle products and technologies together with industrial applications from CISDI can provide end-end portfolio of E&C industry services in cloud. CISDI group was recognized for business leadership and innovative solutions and was presented with Engineering and Construction Industry Excellence Award during Oracle OpenWorld.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >