Search Results

Search found 488 results on 20 pages for 'kubuntu'.

Page 20/20 | < Previous Page | 16 17 18 19 20 

• swapping or thrashing with vast amounts of unmapped pagecache

  - by Marco

  EDIT: I noticed that this is more appropriate for superuser.com, I apologize. I don't know how to delete this question. I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

  Read the article

• ubuntu eth0 not reconnecting after cable unplugged

  - by Alex

  I'm running kubuntu 9.10 w/ gnome, I have a static IP defined in /etc/network/interfaces When I unplugged my network cable and rebooted, then reconnected the network cable I was not able to connect. I tried using sudo ifup eth0, and then ifconfig and it seemed as though the IP address had been assigned and I was connected, but I wasn't. I then did ifdown eth0, and again ifup eth0. For some reason I'm not able to access the network. Furthermore, I also attempted to connect via wlan, and was able to connect to the wireless network, but cannot "see" the network. I can't transfer data or access the internet or anything on the network including the router. How do I resolve this? topsy@monolyth:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:25:1c:df:70 inet addr:192.168.1.145 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:25ff:fe1c:df70/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5720 errors:0 dropped:0 overruns:0 frame:0 TX packets:565 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:378035 (378.0 KB) TX bytes:46832 (46.8 KB) Memory:fe000000-fe020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) By access the network I mean the local network as well as the internet. topsy@monolyth:~$ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=9.14 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.24 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.01 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.00 ms [snip... all OK, icmp_seq from 5-30, time between 0.981-1.25ms] ^C --- 192.168.1.1 ping statistics --- 30 packets transmitted, 30 received, 0% packet loss, time 29035ms rtt min/avg/max/mdev = 0.971/1.300/9.140/1.458 ms topsy@monolyth:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 root@monolyth:~# cat /etc/resolv.conf # Generated by NetworkManager

  Read the article

• Can I use one virtualbox disk for multiple machines?

  - by mxp

  I'm not sure what search term to use and skimming through the VirtualBox manual didn't help me either, so I ask my two questions here... My setup is this: PC with dual boot into Windows 7 and a Debian operating system (both 64bit). I've created a virtual machine (Kubuntu, 64bit) under Windows and put it's VDI file on a SMB share of my NAS. Then I created a VM under linux using the same settings for memory etc and assigned the existing VDI file to it. My idea was that I could use that virtual machine from Windows and Linux as well. (1) Is this generally something that should work without problems? I noticed that snapshots get me into trouble because they appear to be not visible from the other operating system: The snapshots I took after installing the guest system are not visible under Linux. That's why I shut down the VM after usage and not save its state while it's running. My current problem is this: I have used the VM under Windows first, then under Linux. Now it will only start on Linux. When trying this on Windows the guest OS detects some kind of hard disk error and fails to boot because it cannot mount its drive. Obviously the virtual hard disk won't fail so it must have something to do with me using it under Linux. (2) How can I fix that? Update: It also looks like any changes I made in the VM under Linux have been reset by trying to boot it under Windows. Looks like it's back to the latest snapshot. I'm confused... Update The answer to my first question can be found below. In short: It works, as long as you don't use snapshots. The answer to my second question is this: Under Windows set the VM back to the latest snapshot and then discard the snapshot so it gets merged. There should be no snapshots left at the end. If you have multiple snapshots, discard the earliest ones first (Snapshot 1, then 2, 3, ...). I'm not sure what happens if you start at the end (.., 3, 2, 1). This of course leads to some data loss since you revert all changes since the last snapshot. But at least the VM is usable again.

  Read the article

• How to install iodbc in Ubuntu 12.10

  - by Hanynowsky

  I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

  Read the article

• How to remap Fn key combinations (Lenovo G500)

  - by Anatoli

  I am running Kubuntu 13.10 on a Lenovo G500 laptop. My question is similar to this one: How can I remap my F keys on my HP laptop? That is to say, my F1-F12 keys are mapped to certain special functions, and only holding down the Fn key restores access to the standard F1-F12 keys. How do I remap certain keys? I would like to know if there is a way to remap Fx to Fn+Fx and vice-versa. As per the instructions of #87043 I checked my BIOS and there is no option to switch the Fx/Fn key functionality. Googling through Leonovo's support forums indicates a BIOS update enabling this is in the works, but there's no indication of when it will be complete. Using xev I was able to see what X sees when F1-F12 are pressed. Some send separate keycodes, but some are somehow mapped to key combinations or other unknown things: F1 - XF86AudioMute F2 - XF86AudioVolumeLower F3 - XF86AudioVolumeRaise F4 - Alt_L + F4 F5 - F5 F6 - Disables touchapd, cannot quite understand what xev tells me is happening, reenables if disabled (Kernel log reveals these have well-defined scancodes not assigned to any keycodes) F7 - XF86WLAN F8 - Alt_L + Ctrl_L + Tab F9 - Turns off LCD backlight, xev sees nothing F10 - Super_L + p F11 - XF86MonBrightnessLower F12 - XF86MonBrightnessRaise Following the instrusctions on this page: How do I remap certain keys? I remapped all the keys that have definite keycodes (F1, F2, F3, F5, F7, F11, F12) This still leaves the F4, F6, F8, F9, F10 keys not functioning properly. This is especially frustarting since F4, F6, F9 now kill the current window, the touchpad and screen, respectively. Any help on remapping these keys to their proper functions would be much appreciated! -Anatoli xev output for these 5 keys: F4 KeyPress event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674037, (228,298), root:(911,321), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 40, synthetic NO, window 0x4800001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4800001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 4294967197 0 0 0 0 0 0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674040, (228,298), root:(911,321), state 0x8, keycode 70 (keysym 0xffc1, F4), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674042, (228,298), root:(911,321), state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 40, synthetic YES, window 0x4800001, message_type 0x12a (WM_PROTOCOLS), format 32, message 0x12b (WM_DELETE_WINDOW) F6 disabling touchpad MappingNotify event, serial 40, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 40, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 F6 enabling touchpad MappingNotify event, serial 42, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 42, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 42, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 42, synthetic NO, window 0x0, keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 43, synthetic NO, window 0x0, request MappingPointer, first_keycode 0, count 0 F8 doing whatever it is F8 does KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508985, (13,-12), root:(696,11), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508986, (13,-12), root:(696,11), state 0x8, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508988, (13,-12), root:(696,11), state 0xc, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XmbLookupString gives 1 bytes: (09) " " XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508989, (13,-12), root:(696,11), state 0xc, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508991, (13,-12), root:(696,11), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508994, (13,-12), root:(696,11), state 0x0, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XFilterEvent returns: False F9 gives no output to xev F10 doing whatever it is F10 does KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586076, (9,-14), root:(692,9), state 0x0, keycode 10 (keysym 0x31, 1), same_screen YES, XLookupString gives 1 bytes: (31) "1" XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586552, (9,-14), root:(692,9), state 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586554, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XmbLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586557, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586560, (9,-14), root:(692,9), state 0x40, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

  Read the article

• How do I rotate my monitor using xorg?

  - by user1106405

  I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

  Read the article

• How to know when a user has really released a key in Java?

  - by Luis Soeiro

  (Edited for clarity) I want to detect when a user presses and releases a key in Java Swing, ignoring the keyboard auto repeat feature. I also would like a pure Java approach the works on Linux, Mac OS and Windows. Requirements: When the user presses some key I want to know what key is that; When the user releases some key, I want to know what key is that; I want to ignore the system auto repeat options: I want to receive just one keypress event for each key press and just one key release event for each key release; If possible, I would use items 1 to 3 to know if the user is holding more than one key at a time (i.e, she hits 'a' and without releasing it, she hits "Enter"). The problem I'm facing in Java is that under Linux, when the user holds some key, there are many keyPress and keyRelease events being fired (because of the keyboard repeat feature). I've tried some approaches with no success: Get the last time a key event occurred - in Linux, they seem to be zero for key repeat, however, in Mac OS they are not; Consider an event only if the current keyCode is different from the last one - this way the user can't hit twice the same key in a row; Here is the basic (non working) part of code: import java.awt.event.KeyListener; public class Example implements KeyListener { public void keyTyped(KeyEvent e) { } public void keyPressed(KeyEvent e) { System.out.println("KeyPressed: "+e.getKeyCode()+", ts="+e.getWhen()); } public void keyReleased(KeyEvent e) { System.out.println("KeyReleased: "+e.getKeyCode()+", ts="+e.getWhen()); } } When a user holds a key (i.e, 'p') the system shows: KeyPressed: 80, ts=1253637271673 KeyReleased: 80, ts=1253637271923 KeyPressed: 80, ts=1253637271923 KeyReleased: 80, ts=1253637271956 KeyPressed: 80, ts=1253637271956 KeyReleased: 80, ts=1253637271990 KeyPressed: 80, ts=1253637271990 KeyReleased: 80, ts=1253637272023 KeyPressed: 80, ts=1253637272023 ... At least under Linux, the JVM keeps resending all the key events when a key is being hold. To make things more difficult, on my system (Kubuntu 9.04 Core 2 Duo) the timestamps keep changing. The JVM sends a key new release and new key press with the same timestamp. This makes it hard to know when a key is really released. Any ideas? Thanks

  Read the article

• What are the pitfalls of hardlinked files on my desktop PC?

  - by MountainX

  All the identical-content files on my PC are now hardlinked. (My data is completely de-duplicated. It is a consequence of the way I copied my data from my old computer.) What pitfalls do I need to be aware of now that certain actions on one file could silently affect a number of other files? I know that deleting the file I'm working on is not a problem (assuming I deleted it on purpose). It doesn't affect any of the other hardlinked files and I don't see that the delete action would lead to unexpected side effects. Moving or renaming the file is not a problem. I don't see any unexpected consequences. I don't think copying hardlinked files is a problem, but I'm not as confident about any unexpected consequences in this regard. What I have seen is that making a copy (to the same disk) of a hardlinked file with cp keeps the copy hardlinked (i.e., inode number doesn't change in the copy). Copying to another filesystem obviously breaks the hardlink. (I guess one pitfall is forgetting this fact, given that my PC has 3 hard disks.) Changing permissions does affect all linked files. So far this has proven handy. (I made a large number of the hardlinked files read-only.) None of the operations above seem to produce any major unexpected consequences. However, as was pointed out to me by Daniel Beck in a comment, editing or modifying a file can sometimes be a problem. It depends on the tool and maybe the type of edit. (For example, editing small text files using sed seems to always break the link while using nano doesn't.) This introduces the chance that editing one file could affect all the hardlinked files (i.e., alter the original inode). My proposed solution to this is to make all hardlinked files read-only (and that is already mostly the case). If I can't do that for some files, I will unlink those particular files. Is there any problem with this read-only approach? I'm assuming that if I go to edit a file and find it to be read-only, I'll remember to unlink that filename while making it writable. So one pitfall might be forgetting this rule. In that case, I'll have to rely on my backups. Am I correct in the above statements? And what else do I need to know? BTW, I'm running Kubuntu 12.04. I'm also using btrfs. (I have 2 SSD's and 1 HDD in the PC. I will also be adding an external USB HDD. I'm also connected to a network and I mount some NFS shares. I don't assume any of these last bits are relevant to the question, but I'm adding them just in case.) BTW, since I have more than one drive (with separate file systems), to unlink any file all I have to do is copy it to another drive, then move it back. However, using sed also works (in my testing). Here's my script: sed -i 's/\(.\)/\1/' file1 Surprisingly, this even unlinks zero byte files. In my testing it also appears to work on non-text files without any special options. (But I understand that the --binary option might be needed on Windows, MS-DOS and Cygwin.) However, copying to another disk and moving back may be the best way to unlink. For my use-case, unlink command doesn't really "unlink", rather it "removes".

  Read the article

• proftpd, dynamic IP, and filezilla: port troubles

  - by Yami

  The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

  Read the article

• Linux: Apple Wireless A1314 Fn key not registered, looks like software bug

  - by ramplank

  I'm trying to set up my Apple Wireless Keyboard with my Kubuntu systems. These are PC hardware powered by Intel Atom and Intel i5 respectively. The keyboard has a US keyboard layout and has model number A1314 written on the back. It takes two AA batteries. I'm saying that because it appears there are multiple types of model A1314. I have tried this on a 10.04, 11.04, 11.10 and 12.04 system with no success. Every time using a bluetooth dongle and the KDE bluetooth notification tray applet, the keyboard can be connected. In both cases it shows up as "Apple Wireless Keyboard". Almost everything works as expected, in fact, I'm typing on it right now. But one thing doesn't: The Fn key. I'd like to use Fn + Down Arrow as PgDn / Page Down, I understand this is default behaviour on Apple keyboards. And of course I'd like the same for Page Up, Home and End. I'll stick to Page Down in my example. I used the xev tool to see the keycodes the system receives, and if I press on Fn nothing happens, and nothing is registered. If I press Fn + Down Arrow, xev only registers the down arrow. Here's the output from my 11.04 system to illustrate: Press just the Fn key: no output Press Down Arrow key: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699773, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699860, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False Press Fn+Down Arrow Keys together: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701548, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701623, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False I've been searching this forum and other Linux-related forums for hours but I still have not found a solution. I mostly found advice on how to fix this when using an actual apple laptop or desktop, but I don't have that. They said to try something like the following echo 2 > /sys/module/hid_apple/ ... But since there's no hid_apple directory present on my systems, I've needed to modprobe hid_apple first. That didn't help either. I'm cool with changing some config files, or compiling my own patched kernel if that's necessary. I currently have a 10.04 and 12.04 system available to test. The same issue occurs when hooked up to Windows 7. Fn key still does nothing, not by itself or in combination with other keys. With some AutoHotkey fiddling, I was able to confirm the key is registered as pressed, but ignored by default. A custom AutoHotkey script can fix that. But AutoHotkey is only for Windows, I want my problem fixed on Linux. Hooked up to an iPad 2 it only works in combination with the F1-F12 keys. Not with the arrow keys. If the screen of the ipad is off, and I press just the Fn key, the screen will come on, so the key itself is registered as pressed. So to sum up my question: Can anyone help me get Page Up, Page Down, Home and End to work on this keyboard, when that requires me to use an Fn key which is currently not registered?

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• How can I avoid Windows 8.1 resetting my font size?

  - by Michael Tsang

  I am using Windows 8.1 on my laptop, which has a 15.6" screen with resolution 1366x768. I measured the screen with a ruler and calculated its DPI, which is 101. Therefore, I have set the scaling to 105%. However, when I change to an external monitor, which is a huge one with resolution 1920x1080 and DPI 93, I need to change the scaling to 97% but when I change the DPI back and forth, my font sizes have get resetted. I prefer using font sizes 14 on my title bars, message boxes and icons and font sizes 13 on my palette titles, menus and tooltips. However, as my laptop screen is too small, in order to make my apps fit on screen, I use font sizes 12 on my title bars, message boxes and icons and font sizes 11 on my palette titles, menus and tooltips. I don't know why I can't resize the window to make it larger than my screen in Windows (but it is possible in Kubuntu), therefore, some parts of my apps cannot be shown with my preferred font size. I have tried changing both the DPI and the font size by using .reg files. Before switching to my laptop screen, I apply the following: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Desktop] "LogPixels"=dword:00000065 [HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics] "CaptionFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "SmCaptionFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,\ 00,00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MenuFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "StatusFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MessageFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "IconFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "AppliedDPI"=dword:00000065 Before switching to my external display, I apply this: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Desktop] "LogPixels"=dword:0000005d [HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics] "CaptionFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "SmCaptionFont"=hex:ee,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,\ 00,00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MenuFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "StatusFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MessageFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "IconFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "AppliedDPI"=dword:0000005d I expect after applying the file, the DPI settings and the font sizes take effect at the next sign in. However, on my laptop screen, after I applied the file, signed out and in, the DPI setting changed, but the font sizes were resetted to tiny, and I had to apply the same file, signed out and in again to get the correct font size. The situation is even worse on my external monitor. After I applied the file, signed out and in, both the DPI setting and the font sizes were resetted to their default values, which were 96 DPI (the physical DPI as measured by dividing the resolution by the physical size is 93) and font size 9, which is totally unacceptable. How can I write the .reg files such that the settings can be correctly applied with a single sign in?

  Read the article

< Previous Page | 16 17 18 19 20