Search Results

Search found 4584 results on 184 pages for 'michael sh'.

Page 20/184 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• no mails routed to/from new Exchange 2010

  - by Michael

  I have an Exchange Server 2003 up and running for years. Now I am in the mid of transition to Exchange Server 2010, I already installed it, put the latest Servicepack on it and everything seems fine, BUT: Mails do not get delivered to MailBoxes on the new Exchange 2010. e.g. when I create a new mailbox on the old server, Emails in and out to/from it work like a charm. But as soon as I move it to the new server, emails get stuck. Noe delivered from outside or old mailboxes, not send out from the new server to enywhere. Sending between Mailboxes on the new Server of course is working. I can see the connectors between old and new Server in the Exchange 2003 Admin Tool, but I cannot find these nowhere on the new server. I have also setup sending connectors at the new server to send out mails directly, but that does not work. In all other areas, the servers are perfectly working together - moving mailboxes between, seeing each other etc. "just" they dont exchange (!) any emails - Any ideas what I missed? I also followed the hints from: Upgrading from Exchange 2003 to Exchange 2010, routing works in one direction only There Emails were transported at least in one direction, in my case they are not transported at all. Both my connectors are up and valid abd have the correct source/target shown on Get-RoutingGroupConnector | FL Kind regards Michael

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

• Solaris cc segfaults when compiling rsync on intel platform

  - by PP

  I am trying to compile rsync-3.0.7 on Solaris 5.10 on an Intel chipset. When running ./configure I see the following (obviously erroneous lines): checking size of int... 0 checking size of long... 0 checking size of long long... 0 checking size of short... 0 checking size of int16_t... 0 checking size of uint16_t... 0 In config.log I see the following lines: configure.sh:5448: /tool/sunstudio12.1/bin/cc -xc99=all -o conftest -g -DHAVE_CONFIG_H conftest.c >&5 "conftest.c", line 123: warning: statement not reached cc: Fatal error in cc : Segmentation Fault configure.sh:5448: $? = 1 configure.sh: program exited with status 1 Segmentation fault? What could be causing a simple test script to segfault during compilation?

  Read the article

• Start kippo on Ubuntu startup

  - by Cory Gagliardi

  I'm setting up a new Ubuntu 14.04 server and followed these instructions to install kippo (the SSH Honeypot). To run kippo, I do: su kippo ~/kippo/start.sh The contents of start.sh is simply: #!/bin/sh echo -n "Starting kippo in background..." authbind --deep twistd -y kippo.tac -l log/kippo.log --pidfile kippo.pid Which starts up a background process for kippo. What can I do to make this automatically run on startup? Do I need to add a script that calls this in /etc/init.d?

  Read the article

• How do I create a Launcher in Ubuntu 9.10 that runs a shell script?

  - by mkelley33

  Here's my situation: New to Ubuntu (just installed 9.10 Karmic Koala 64 bit) Purpose: to easily run PyCharm without too much typing (ie. cd... ./pycharm.sh) Want to create desktop Launcher instead of terminal & typing (without resorting to the "Run in Terminal" option) Tried to create Launcher to executes .sh script in Document directory Right-clicked Desktop Create Launcher a. Type == Application; Browse [insert absolute path to .sh script]; no luck b. Type == Application in Terminal; Browse ...ditto I'm open to any other alternatives that involve as little typing as possible. I would like to just start Ubuntu, click Launcher icons, and have terminals spring to life, running the intended scripts. Crazy? No. Lazy? Probably. Productive? Hopefully :)

  Read the article

• Is there a difference between starting a WebLogic Admin Server through the command-line or through t

  - by lindelof

  I have WebLogic 11g installed on my machine under /srv/wls, and I start Node manager on it with /srv/wls/wlserver_10.3/server/bin/startNodeManager.sh. I create my domain with config.sh, and then I want to start the Admin Server of that domain with Node Manager. So I open a WLST session and do the following: > nmConnect(...) > nmStart('AdminServer') But when I then visit localhost:7001/console, and login, the screen on the browser remains blank and the server logs tell me the server has run out of PermGen space. I don't encounter this problem when starting the Admin Server through the shell script under $DOMAIN/startWebLogic.sh. Then it works fine. Any idea what I am doing wrong? I couldn't find anything in Google nor on the Oracle forums...

  Read the article

• Using Gentoo's `ebegin`, `eend` etc under Ubuntu

  - by Marcus Downing

  We're quite fond of the style of the ebegin, eend, eerror, eindent etc commands used by Portage and other tools on Gentoo. The green-yellow-red bullets and standard layout make for very quick spotting of errors, on what would otherwise be very grey command line output. #!/bin/sh source /etc/init.d/functions.sh ebegin "Copying data" rsync .... eend $? Producing output similar to: * Copying data... [ OK ] As a result we're using these commands in some of our common shell scripts, which is a problem for the people using Ubuntu and other linuxes. (linuces? linuxen? linucae? other distros) On Gentoo these functions are provided by OpenRC, and imported with functions.sh file (whose exact position seems to vary slightly). But is there a simple way of getting these commands on Ubuntu? In theory we could replace them all with dull echos, but we'd rather not?

  Read the article

• launchctl - use rvm instead of system Ruby in executed scripts?

  - by Stefan Kendall

  I have a launchctl job I define as such: <key>ProgramArguments</key> <array> <string>/bin/sh</string> <string>-c</string> <string>~/projects/script.sh</string> </array> When I run script.sh manually, the script works fine, as it uses the currently configured rvm version of ruby. When I run this through launchctl, the system version of Ruby is used, which breaks the script. How can I get this script to run with the right version of ruby available?

  Read the article

• Cygwin Syntax Trouble

  - by mkrouse

  I'm on windows 7 using Cygwin. My script and text file are located in the same directory. #!/bin/bash while read name; do echo "Name read from file - $name" done < /home/Matt/servers.txt I get this error and I don't know why because this is correct while loop syntax..? u0146121@U0146121-TPD-A ~/Matt $ ./script.sh ./script.sh: line 4: syntax error near unexpected token `done' ./script.sh: line 4: `done < /home/Matt/servers.txt' Can anybody tell me what I'm doing wrong? I think it's because I'm on windows and using Cygwin.

  Read the article

• Debugging logrotate postrotate script

  - by robert

  Following is my logrotate conf. /mnt/je/logs/apache/jesites/web/*.log" { missingok rotate 0 size 5M copytruncate notifempty sharedscripts postrotate /home/bitnami/.conf/compress-and-upload.sh /mnt/je/logs/apache/jesites/web/ web endscript } And compress-and-upload.sh script, #!/bin/sh # Perform Rotated Log File Compression tar -czPf $1/log.gz $1/*.1 # Fetch the instance id from the instance EC2_INSTANCE_ID="`wget -q -O - http://169.254.169.254/latest/meta-data/instance-id`" if [ -z $EC2_INSTANCE_ID ]; then echo "Error: Couldn't fetch Instance ID .. Exiting .." exit; else /usr/local/bin/s3cmd put $1/log.gz s3://xxxx/logs/$(date +%Y)/$(date +%m)/$(date +%d)/$2/$EC2_INSTANCE_ID-$(date +%H:%M:%S)-$2.gz fi # Removing Rotated Compressed Log File rm -f $1/log.gz The files are rotated, but shell script is not executed. I don't know how to debug the postscript. Is there any logfile I chek to see if there is any permission issues. If i directly execute the script from commandline file upload works. Thanks.

  Read the article

• Execute local script requiring arguments on Linux via plink

  - by c_maker

  Is it possible to execute (from windows) a local script with arguments on a remote linux system? Here's what I got: plink 1.2.3.4 -l root -pw mypassword -m hello.sh Is there a way to do this same thing, but able to give input parameters to hello.sh? I've tried many things, including: plink 1.2.3.4 -l root -pw mypassword -m hello.sh input1 input2 In this case it seems that plink thinks that input1 and input2 are its arguments.. which makes sense. What are my options?

  Read the article

• STOP 0x7b booting from iSCSI

  - by Michael

  Hi, I've a Windows 2008 SBS running. It boots of iSCSI. That setup worked for months until yesterday. I intended to reboot and gained a: STOP 0x0000007b INACCESSIBLE_BOOT_DEVICE and no idea why. My setup hasn't changed. No new controller, no new or changed iSCSI targets, no new Network Card or IP address changes. I had all Windows Updates on it. Last known good: same STOP. Allow unsigned drivers: same STOP. Safe mode (all variants): same STOP. Mount target from a client: works. Filesystem check fine. I booted of the SBS DVD but in computer repair options my target doesn't appear. When i choose setup the target appears. So, how can i diagnose what's going wrong? Any helpful tools? Any hints? Thanks in advance Michael

  Read the article

• added shell script to sudoers still getting permission denied

  - by Bill S

  I don't understand this? Other uses of sudo work fine. [oracle@o plugins]$ su Password: [root@ plugins]# su nrpe bash-3.2$ /home/oracle/obiee/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/bi-init.sh bash: /home/oracle/obiee/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/bi-init.sh: Permission denied bash-3.2$ sudo -l Matching Defaults entries for nrpe on this host: env_reset, env_keep="COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR LS_COLORS MAIL PS1 PS2 QTDIR USERNAME LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS _XKB_CHARSET XAUTHORITY" Runas and Command-specific defaults for nrpe: User nrpe may run the following commands on this host: (ALL) NOPASSWD: /home/oracle/obiee/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/bi-init.sh bash-3.2$

  Read the article

• what is the meaning of *this* crontab setting?

  - by aXqd

  * */1 * * * sh foo.sh I found this setting on one production machine. And foo.sh was executed every one minute. I am guessing that the original author of this setting wants it to be executed every one hour. And I cannot find the official meaning of this setting in the crontab man page. Hence please help. UPDATE: I extracted these logs from that machine, however I cannot find the law out of them. 2013-06-29 20:47:01 2013-06-29 20:50:02 2013-06-29 20:51:01 2013-06-29 20:53:01 2013-06-29 20:54:01 2013-06-29 20:57:01 2013-06-29 20:58:01 2013-06-29 21:00:01 2013-06-29 21:05:02 2013-06-29 21:10:02

  Read the article

• Where to set java heap options (e.g. -Xmx) for Tomcat 6 under Ubuntu 9.04?

  - by Chris

  I'm running Tomcat using the tomcat6 package from Ubuntu 9.04, which makes a daemon out of Tomcat using jsvc. I'd like to know the proper way to set Java heap options like -Xmx for Tomcat. I'd like to put the configuration wherever is most stylistically correct, and wherever is least likely to be overwritten by Ubuntu package updates. The options I see right now: Hard-code them somewhere in /etc/init.d/tomcat6. Hard-code them somewhere in /usr/share/tomcat6/bin/catalina.sh. Create a line in /usr/share/tomcat6/bin/startup.sh to set CATALINA_OPTS to have the desired flags, and then export CATALINA_OPTS as an environment variable. (This looks like it will get picked up by catalina.sh.) The last option sounds like the best one, and it's advocated (without explanation of why) at http://serverfault.com/questions/121038/increasing-javas-heapspace-in-tomcat-startup-script. But I wanted to get a second opinion. Anyone want to confirm that there isn't a better way?

  Read the article

• Pass User Data to AWS client

  - by bearrito

  Has anyone successful passed user data to the AWS CLI ? I have tried various incantations of the following but it does not work. Docs say string must be base64 encoded : http://docs.aws.amazon.com/cli/latest/reference/ec2/run-instances.html The instance logs never indicate the script is executed and chef is installed. aws ec2 run-instances --image-id ami-a73264ce --count 1 --instance-type t1.micro --key-name scrubbed --iam-instance-profile Arn=arn:aws:iam::scrubbed:instance-profile/scrubbed --user-data $(base64 chef_user_data.sh --wrap=0) chef_user_data.sh #!/bin/bash curl -L https://www.opscode.com/chef/install.sh | sudo bash

  Read the article

• stop apache from asking for SSL password each restart

  - by acidzombie24

  Using instructions from this site but varying them just a little i created a CA using -newca, i copied cacert.pem to my comp and imported as trusted issuer in IE. I then did -newreq and -sign (note: i do /full/path/CA.sh -cmd and not sh CA.sh -cmd) and moved the cert and key to apache. I visited the site in IE and using .NET code and it appears trusted, great (unless i write www. in front which is expected). But every time i restart apache i need to type in my password for the site(s?). How can i make it so i DO NOT need to type in the password?

  Read the article

• using sed to replace two patterns within a larger pattern

  - by Hair of the Dog

  Using sed how could I replace two patterns within a larger pattern on a single line? Given a single line of text I want to find a pattern (Let's call this the outer pattern) and then within that outer pattern replace two inner patterns. Here's a one line example of the input text: Z:\source\private\main\developer\foo\setenv.sh(25): export 'FONTCONFIG_PATH'="$WINE_SHARED_SUPPORT/X11/etc/fonts" In the example above the outer pattern is "/^.*([[:digit:]]+):/" which should equal "Z:\source\private\main\developer\foo\setenv.sh(25):" The two inner patterns are "/^[A-Za-z]:/" and "/\/". Another way to phrase my question is: Using sed I know how to perform replacements of a pattern using the "s" command, but how do I limit the range of "s" command so it only works on the portion of the input string up to the "(25):"? The ultimate result I am trying to get is the line of text is transformed into this: /enlistments/source/private/main/developer/foo/setenv.sh(25): export 'FONTCONFIG_PATH'="$WINE_SHARED_SUPPORT/X11/etc/fonts"

  Read the article

• How to avoid specifying full path in sudoers file?

  - by s g

  I am trying to add a NOPASSWD entry for sudotest.sh (or any script/binary that requires sudo) in my /etc/sudoers file (on Ubuntu 12.04 LTS server), but in order to make it work, I must specify the full path. The following entry works just fine: %jenkins ALL=(ALL)NOPASSWD:/home/vts_share/test/sudotest.sh The problem is that the script might move to a different directory. This seems like a great chance to use the * wildcard in the path (i.e. /*/sudotest.sh) so that my script could be in any directory but the manual states that wildcards will not match the / character when used in a path. I've confirmed that it doesn't work. I know that I can use the word ALL in place of my script, but this means there is no password prompt for any commands which seems unsafe. How do I solve this?

  Read the article

• Implementing Unit Testing on the iPhone

  - by james.ingham

  Hi, So I've followed this tutorial to setup unit testing on my app when I got a little stuck. At bullet point 8 in that tutorial it shows this image, which is what I should be expecting when I build: However this isn't what I get when I build. I get this error message: Command /bin/sh failed with exit code 1 as well as the error message the unit test has created. Then, when I expand on the first error I get this: PhaseScriptExecution "Run Script" "build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh" cd "/Users/james/Desktop/FYP/3D Pool" setenv ACTION build setenv ALTERNATE_GROUP staff ... setenv XCODE_VERSION_MAJOR 0300 setenv XCODE_VERSION_MINOR 0320 setenv YACC /Developer/usr/bin/yacc /bin/sh -c "\"/Users/james/Desktop/FYP/3D Pool/build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh\"" /Developer/Tools/RunPlatformUnitTests.include:412: note: Started tests for architectures 'i386' /Developer/Tools/RunPlatformUnitTests.include:419: note: Running tests for architecture 'i386' (GC OFF) objc[12589]: GC: forcing GC OFF because OBJC_DISABLE_GC is set Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' started at 2010-01-04 21:05:06 +0000 Test Suite 'LogicTests' started at 2010-01-04 21:05:06 +0000 Test Case '-[LogicTests testFail]' started. /Users/james/Desktop/FYP/3D Pool/LogicTests.m:17: error: -[LogicTests testFail] : Must fail to succeed. Test Case '-[LogicTests testFail]' failed (0.000 seconds). Test Suite 'LogicTests' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.000) seconds Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.002) seconds /Developer/Tools/RunPlatformUnitTests.include:448: error: Failed tests for architecture 'i386' (GC OFF) /Developer/Tools/RunPlatformUnitTests.include:462: note: Completed tests for architectures 'i386' Command /bin/sh failed with exit code 1 Now this is very odd as it is running the tests (and succeeding as you can see my STFail firing) because if I add a different test which passes I get no errors, so the tests are working fine. But why am I getting this extra build fail? It may also be of note that when downloading solutions/templates which should work out the box, I get the same error. I'm guessing I've set something up wrong here but I've just followed a tutorial 100% correctly!! If anyone could help I'd be very grateful! Thanks EDIT: According to this blog, this post and a few other websites, I'm not the only one getting this problem. It has been like this since the release of xCode 3.2, assuming the apple dev center documents and tutorials etc are pre-3.2 as well. However some say its a known issue whereas others seem to think this was intentional. I for one would like both the extended console and in code messages, and I certainly do not like the "Command /bin/sh..." error and really think they would have documented such an update. Hopefully it will be fixed soon anyway. UPDATE: Here's confirmation it's something changed since the release of xCode 3.2.1. This image: is from my test build using 3.2.1. This one is from an older version (3.1.4): . (The project for both was unchanged).

  Read the article

• Implementing Unit Testing with the iPhone SDK

  - by ing0

  Hi, So I've followed this tutorial to setup unit testing on my app when I got a little stuck. At bullet point 8 in that tutorial it shows this image, which is what I should be expecting when I build: However this isn't what I get when I build. I get this error message: Command /bin/sh failed with exit code 1 as well as the error message the unit test has created. Then, when I expand on the first error I get this: PhaseScriptExecution "Run Script" "build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh" cd "/Users/james/Desktop/FYP/3D Pool" setenv ACTION build setenv ALTERNATE_GROUP staff ... setenv XCODE_VERSION_MAJOR 0300 setenv XCODE_VERSION_MINOR 0320 setenv YACC /Developer/usr/bin/yacc /bin/sh -c "\"/Users/james/Desktop/FYP/3D Pool/build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh\"" /Developer/Tools/RunPlatformUnitTests.include:412: note: Started tests for architectures 'i386' /Developer/Tools/RunPlatformUnitTests.include:419: note: Running tests for architecture 'i386' (GC OFF) objc[12589]: GC: forcing GC OFF because OBJC_DISABLE_GC is set Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' started at 2010-01-04 21:05:06 +0000 Test Suite 'LogicTests' started at 2010-01-04 21:05:06 +0000 Test Case '-[LogicTests testFail]' started. /Users/james/Desktop/FYP/3D Pool/LogicTests.m:17: error: -[LogicTests testFail] : Must fail to succeed. Test Case '-[LogicTests testFail]' failed (0.000 seconds). Test Suite 'LogicTests' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.000) seconds Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.002) seconds /Developer/Tools/RunPlatformUnitTests.include:448: error: Failed tests for architecture 'i386' (GC OFF) /Developer/Tools/RunPlatformUnitTests.include:462: note: Completed tests for architectures 'i386' Command /bin/sh failed with exit code 1 Now this is very odd as it is running the tests (and succeeding as you can see my STFail firing) because if I add a different test which passes I get no errors, so the tests are working fine. But why am I getting this extra build fail? It may also be of note that when downloading solutions/templates which should work out the box, I get the same error. I'm guessing I've set something up wrong here but I've just followed a tutorial 100% correctly!! If anyone could help I'd be very grateful! Thanks EDIT: According to this blog, this post and a few other websites, I'm not the only one getting this problem. It has been like this since the release of xCode 3.2, assuming the apple dev center documents and tutorials etc are pre-3.2 as well. However some say its a known issue whereas others seem to think this was intentional. I for one would like both the extended console and in code messages, and I certainly do not like the "Command /bin/sh..." error and really think they would have documented such an update. Hopefully it will be fixed soon anyway. UPDATE: Here's confirmation it's something changed since the release of xCode 3.2.1. This image: is from my test build using 3.2.1. This one is from an older version (3.1.4): . (The project for both was unchanged). Edit: Image URLS updated.

  Read the article

• How do I create statistics to make ‘small’ objects appear ‘large’ to the Optmizer?

  - by Maria Colgan

  I recently spoke with a customer who has a development environment that is a tiny fraction of the size of their production environment. His team has been tasked with identifying problem SQL statements in this development environment before new code is released into production. The problem is the objects in the development environment are so small, the execution plans selected in the development environment rarely reflects what actually happens in production. To ensure the development environment accurately reflects production, in the eyes of the Optimizer, the statistics used in the development environment must be the same as the statistics used in production. This can be achieved by exporting the statistics from production and import them into the development environment. Even though the underlying objects are a fraction of the size of production, the Optimizer will see them as the same size and treat them the same way as it would in production. Below are the necessary steps to achieve this in their environment. I am using the SH sample schema as the application schema who's statistics we want to move from production to development. Step 1. Create a staging table, in the production environment, where the statistics can be stored Step 2. Export the statistics for the application schema, from the data dictionary in production, into the staging table Step 3. Create an Oracle directory on the production system where the export of the staging table will reside and grant the SH user the necessary privileges on it. Step 4. Export the staging table from production using data pump export Step 5. Copy the dump file containing the stating table from production to development Step 6. Create an Oracle directory on the development system where the export of the staging table resides and grant the SH user the necessary privileges on it.  Step 7. Import the staging table into the development environment using data pump import Step 8. Import the statistics from the staging table into the dictionary in the development environment. You can get a copy of the script I used to generate this post here. +Maria Colgan

  Read the article

• How do I fix my installation of ATI Catalyst Video Drivers in 12.04 LTS?

  - by Boris

  My graphic card is a Mobility Radeon HD 4200 Series. I tried these 2 answers from What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? But unfortunately, it does not work for me: When running the amd script, I get this error message: $ sudo sh ./amd-driver-installer-12-4-x86.x86_64.run ... DKMS part of installation failed. Please refer to /usr/share/ati/fglrx-install.log for details When checking this log file, I get: Uninstalling any previously installed drivers. Creating symlink /var/lib/dkms/fglrx/8.961/source -> /usr/src/fglrx-8.961 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... cd /var/lib/dkms/fglrx/8.961/build; sh make.sh --nohints --uname_r=3.2.0-24-generic-pae --norootcheck......(bad exit status: 1) [Error] Kernel Module : Failed to build fglrx-8.961 with DKMS [Error] Kernel Module : Removing fglrx-8.961 from DKMS Deleting module version: 8.961 completely from the DKMS tree. Done. [Reboot] Kernel Module : update-initramfs When checking with fglrxinfo, I get: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 138 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13

  Read the article

• Configuring Weblogic Server 10.3.6 from 32-bit mode to 64-bit mode

  - by Ekta Malik

  This post pertains to the configuration of Weblogic Server from 32-bit mode to 64-bit mode on Solaris OS. Just in case, you have WLS 10.3.6 running in 32-bit mode and the JDK being used is installed for 64-bit mode [On Solaris OS, JDK 64-bit installation comprises of installing 32-bit JDK followed by a patch for 64-bit JDK].  Verification of the mode being used One can verify the mode of Weblogic Server in the following ways Either check the commonEnv.sh script located at $MIDDLEWARE_HOME/wlserver_10.3/common/bin where $MIDDLEWARE_HOME refers to the install directory of Middleware. Look for the patterns - SUN_ARCH_DATA_MODEL and JAVA_USE_64BIT in the file. For 32-bit mode, the parameters would appear as shown belowSUN_ARCH_DATA_MODEL="32"JAVA_USE_64BIT=false Check the server console logs; which JDK is being used during start-up By checking which JDK is used by the running process of Weblogic Server Configuration Steps Take a backup of the commonEnv.sh script located at $MIDDLEWARE_HOME/wlserver_10.3/common/bin where $MIDDLEWARE_HOME refers to the install directory of Middleware Modify the commonEnv.sh script for the following parameters: The values should be 64 and true respectively for 64-bit modeSUN_ARCH_DATA_MODEL="64"JAVA_USE_64BIT=true  Restart the weblogic server. One can confirm that the JDK being used is 64-bit by looking at the Weblogic console logs during server start up or by looking at the running process.

  Read the article

• Resetup kernel for virtualbox and now ubuntu is in initramfs state

  - by UbuntuMan

  My 10.04LTS became Read-Only so I wanted to reboot this virtual machine. Then I couldn't get it back up running. VirtualBox threw Result Code: NS_ERROR_FAILURE (0x80004005) error. I did the kernel re-setup: sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules [ OK ] * Uninstalling old VirtualBox DKMS kernel modules [ OK ] * Trying to register the VirtualBox kernel modules using DKMS [ OK ] * Starting VirtualBox kernel modules [ OK ] I can't even use sudo in this state. What can I do? (initframfs) /dev/sda1 /bin/sh: /dev/sda1: Permission denied (initframfs) /dev/sda2 /bin/sh: /dev/sda3: Permission denied (initframfs) /dev/sda3 /bin/sh: /dev/sda1: not found I have a similar image so I can check the disks setting if needed. Please help me. Thanks. I have an older version of VirtualBox: 4.0.8 something like that. But other vms on the same VirtualBox are working fine. UPDATE I can hold down SHIFT key and see the GURU menu. Only one kernel exists. Ubuntu(...) Ubuntu(recovery) master test master test

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >