Search Results

Search found 47660 results on 1907 pages for 'name resolution'.

Page 20/1907 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Configure 27" 2560x1440 for a monitor with corrupt EDID

    - by Aras
    I am trying to get a monitor work with my Ubuntu laptop. The monitor is this cheap 27" Korean monitors which has a 2560x1440 resolution -- and nothing else. Here are some specifications of this monitor: 2560x1440 @60Hz Only one dual link DVI-D input -- no other input port (no HDMI or display port) no OSD no scalar reports corrupt EDID does 2560x1440 @60Hz, did I say that already? Anyways, the monitor works beautifully with my Ubuntu desktop which has an nVidia card with DVI output. However, I am having problem using this monitor with my laptop. After some searching around I found a few posts suggesting to use an active adaptor for mini display port, so I went and bought a mini display to dual link DVI-D adaptor.. When using this adaptor the monitor is recognized by nvidia-settings tool but with incorrect resolution information. As you can see the monitor is incorrectly recognized and there are no other resolution available to set. This post on ubuntu forums and this other post on overclock both suggest that the monitor is reporting corrupt EDID file. I have tried following their instructions, but so far I have not been able to display any image on the monitor from my laptop. The laptop I am using is an ASUS G75VW with a 1920x1080 screen. It has a VGA, an HDMI 1.4a, and a mini display port. The graphic card is an nvidia gforce gtx 660M with 2GB dedicated memory. I am running Ubuntu 12.10 on here which I upgrade from 12.04 a few weeks ago. As I said I have tried several suggestions, including specifying Modeline in xorg.conf and also linking to EDID files I found from those forum posts above. However, I am not sure if the EDID files I found are suitable for my monitor. I think the solution to my problem consist of obtaining the EDID file of my monitor and then fixing it and modifying xorg.conf to force nvidia driver to load the correct resolution. However, I am not sure what steps I need to take to do this. Here is the part of sudo xrandr --prop output that is related to this monitor: DP-1 connected 800x600+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm SignalFormat: DisplayPort supported: DisplayPort ConnectorType: DisplayPort ConnectorNumber: 3 (0x00000003) _ConnectorLocation: 3 (0x00000003) 800x600 60.3*+ I was expecting to see the EDID file in this output as was mentioned in this post, but it is not there. After several hours of tweaking X configurations, I decided it was time to ask for help here. I would really appreciate if someone with experience regarding EDID and X configuration could give me a hand to solve this issue.

    Read the article

  • Missing resolutions on ubuntu 11.10 fresh install

    - by Sean Marshall
    Today I installed Ubuntu 11.10 for the first time on my computer. My Monitor's resolution is 1280x1024, but the only resolutions in display are "1024x768 (4:3)" and "800x600 (4:3)". I installed all updates, There is nothing in additional drivers and still nothing. I want to set the resolution to 1280x1024. How do I check my graphic card name? By the way Unity 3d is working and compiz effects are working super fast.

    Read the article

  • External HDMI poor quality

    - by paschoal
    When pluging an external HDMI display, it get detected and everything was supposed to be working right out of the box, except that when set the resolution to 1920x1080, the display on HDMI is really poor quality. Playing around with xrandr, when setting resolution at 1680x1050 or below, everything is smooth, when setting 1920x1080 or 1920x1080i, with wide variety of refresh rates, it's the same poor quality display. Unfortunely I can't post an image showing the exactly issue (low reputation). Specifications: Dell Inspiron 14 (Intel HD Graphics) Samsung TA550

    Read the article

  • What does 1024x768X24 mean?

    - by emersonhsieh
    I was planning to change the Plymouth screen resolution(Blame Fglrx!). When I went to GRUB-Customizer(info for that), the screen resolution menu shows (as usual) 800x600, 1024x678, 600x400, and a bunch of other things. But after I scrolled down, I saw weird screen resolutions like 1024x768 x8, 1024x768 x16, 1024x768 x24, etc. Computer screens shape like a rectangle, not a cube, so what does those extra numbers mean? Or is there a secret dimension in every computer screen that I ignored?

    Read the article

  • Resolution Independence in libGDX

    - by ashes999
    How do I make my libGDX game resolution/density independent? Is there a way to specify image sizes as "absolute" regardless of the underlying density? I'm making a very simple kids game; just a bunch of sprites displayed on-screen, and some text for menus (options menu primarily). What I want to know is: how do I make my sprites/fonts resolution independent? (I have wrapped them in my own classes to make things easier.) Since it's a simple kids game, I don't need to worry about the "playable area" of the game; I want to use as much of the screen space as possible. What I'm doing right now, which seems super incorrect, is to simply create images suitable for large resolutions, and then scale down (or rarely, up) to fit the screen size. This seems to work okay (in the desktop version), even with linear mapping on my textures, but the smaller resolutions look ugly. Also, this seems to fly in the face of Android's "device independent pixels" (DPs). Or maybe I'm missing something and libGDX already takes care of this somehow? What's the best way to tackle this? I found this link; is this a good way of solving the problem?: http://www.dandeliongamestudio.com/2011/09/12/android-fragmentation-density-independent-pixel-dip/ It mentions how to control the images, but it doesn't mention how to specify font/image sizes regardless of density.

    Read the article

  • Collision Resolution

    - by ultifinitus
    Hey all, I'm making a simple side-scrolling game, and I would appreciate some input! My collision detection system is a simple bounding box detection, so it's really easy to implement. However my collision resolution is ridiculous! Currently I have a little formula like this: if (colliding(firstObject,secondObject)) firstObject.resolve_collision(yAxisOffset); if (colliding(firstObject,secondObject)) firstObject.resolve_collision(xAxisOffset); where yAxisOffset is only set if the first object's previous y position was outside the second object's collision frame, respectively xAxisOffset as well. Now this is working great, in general. However there is a single problem. When I have a stack of objects and I push the first object against that stack, the first object get's "stuck," on the stack. What's I think is happening is the object's collision system checks and resolves for collisions based on creation time, so If I check one axis, then the other, the object will "sink" object directly along the checking axis. This sinking action causes the collision detection routine to think there's a gap between our position and the other object's position, and when I finally check the object that I've already sunk into, my object's position is resolved to it's original position... All this is great, and I'm sure if I bang my head against a wall long enough i'll come up with a working algorithm, but I'd rather not =). So what in the heck do you think I should do? How could I change my collision resolution system to fix this? Here's the program (temporary link, not sure how long it'll last) (notes: arrow keys to navigate, click to drop block, x to jump) I'd appreciate any help you can offer!

    Read the article

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • Force startx to run X in a specific resolution and refresh Rate

    - by Z9iT
    From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024x768. I have "installed and configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however, whenever there is a need to enter GUI, I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem because its default refresh rate won't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204x768 I can open terminals with Ctrl+Alt+T and enter commands. Key combinations like Ctrl+Alt+NumPlus works flawlessly in distributions like solaris, but it's not working for me. Also the commands like xrandr -r 60 60 being refresh rate wont work. The same problem is faced even when I boot from a live CD

    Read the article

  • Web hosting company basically forces me to use their domain name [closed]

    - by Jinx
    I've recently stumbled upon an unusual problem with one of hosting companies called giga-international.com. Anyway, I've ordered com.hr domain from Croatian domain name registration company, and my client insisted on using this host provider as couple of his friends already are hosted with them. I thought something was fishy when the first result on Google for Giga International was this little forum rant instead of their webpage. When I was checking their services they listed many features etc... space available, bandwidth etc. I just wanted to check how much ram do I get for my PHP scripts so I emailed them, and they told me that was company secret. Seriously? Anyway, since my client still insisted on hosting with them I've bought their Webspace package. During registration I had to choose free domain name because I couldn't advance registration without it. Nowhere was said, not even in general terms and conditions that I wouldn't be able to change that domain name. At least not for double the price of domain name per year. They said I can either move my domain name over to them (and pay them domain registration), or pay them 1 Euro per month for managing a DNS entry. On any previous hosting solution I was able to manage my domain names just by pointing my domain to their name servers, and this is something completely new and absurd for me. They also said that usual approach is not possible because of security and hardware limitations. I'd like to know what you guys think about this case, and should I report, and where should I report this case. In short. They forced me to register free domain name which doesn't suit my needs in order to register for their webspace package, and refuse to change domain name for my account until I either transfer domain to them or pay them DNS management which costs double the price of the domain name per year.

    Read the article

  • Batch convert Malformed PDFs to TIF on Linux

    - by Mike Driscoll
    I need to convert a multipage PDF to TIF, but it appears to be a malformed PDF provided by our client. I tried using ImageMagick and GhostScript, but they do not convert the file correctly. The result is only about 85-90% correct. The only thing I've found that appears to do the job is GIMP, but I can't find an example to use it via its Batch Processing methods for PDFs. Here are the warnings I get from ImageMagick and GhostScript: **** Warning: Tf refers to an unknown resource name: FORMS$.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: P06BOB.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN308E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: P06BOB.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN308E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: P06BOB.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN308E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN307A.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN104A.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN308E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN208E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN308E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN208E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: HE14BP.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN208E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN106E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN208E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN106E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN208E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: HE08BP.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: HE11BP.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: AR10NP.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN308E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: JIMP2.l Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: HS11C.l Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: FORMS$.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN104A.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN208E.f Assuming it's a font name. **** Warning: Tf refers to an unknown resource name: UN307E.f Assuming it's a font name. **** This file had errors that were repaired or ignored. **** Please notify the author of the software that produced this **** file that it does not conform to Adobe's published PDF **** specification. I'm open to other suggestions too. Thanks!

    Read the article

  • Find a name in a list if the name is spelt wrong

    - by Matt
    I've got a list of names which some code checks against to see if the person exists, and if so do some stuff.. My issue is that I want to handle the case of the name being entered incorrectly.. I.e. I have a list of names Bob Frank Tom Tim John If I type in Joohn, I want it to ask me if I meant John. If I type Tm, I get asked if I meant Tim, if I say no, it asks if i meant Tom.. Etc.. Has anyone done something like this before?

    Read the article

  • Possible Conflict with Class name & Property Name?

    - by coffeeaddict
    If you have a namespace that contains a property in ClassA and a class that has the name of that Property somewhere else in your project and both are in the same namespace this won't cause conflicts will it? So lets say I have a class named Car namespace Dealer { class Vehicle { // the main class that defines vehicle, so this is Dealer.Vehicle (Vehicle.cs) } } and a property over in some other class namespace Dealer { class Dealer { public Vehicle Vehicle { get { return _vehicle; } } } } so for the second it is really this for the property public Dealer.Vehicle Vehicle { get { return _car; } } so now you have Dealer.Vehicle and Dealer.Dealer.Vehicle. Wondering of that would cause a conflict ever. If both those classes are in the same namespace and

    Read the article

  • How should I name the language data files?

    - by Ron
    Recently I decided to add some translations to my program. I wonder how I should name the language files? in the culture's name of the language (example: english = en, french = fr, italian = it, etc...) in the name of the language [in english] (example: english = english, french = french, italian = italian, etc..) I know you'll choose the second way because you dont have to detect which filename it is because both have the same name. But the problem is this - I show the name of the languages in its langauge (example: english = english, french = française, italian = italiano, etc..) so I still need to detect which filename it is. The main question is which way I should choose? the name of the language in english or the culture name? and why?... Thanks!

    Read the article

  • Part 8: How to name EBS Customizations

    - by volker.eckardt(at)oracle.com
    You might wonder why I am discussing this here. The reason is simple: nearly every project has a bit different naming conventions, which makes a the life always a bit complicated (for developers, but also setup responsible, and also for consultants).  Although we always create a document to describe the technical object naming conventions, I have rarely seen a dedicated document  with functional naming conventions. To be precisely, from my stand point, there should always be one global naming definition for an implementation! Let me discuss some related questions: What is the best convention for the customization reference? How to name database objects (tables, packages etc.)? How to name functional objects like Value Sets, Concurrent Programs, etc. How to separate customizations from standard objects best? What is the best convention for the customization reference? The customization reference is the key you use to reference your customization from other lists, from the project plan etc. Usually it is something like XXHU_CONV_22 (HU=customer abbreviation, CONV=Conversion object #22) or XXFA_DEPRN_RPT_02 (FA=Fixed Assets, DEPRN=Short object group, here depreciation, RPT=Report, 02=2nd report in this area) As this is just a reference (not an object name yet), I would prefer the second option. XX=Customization, FA=Main EBS Module linked (you may have sometimes more, but FA is the main) DEPRN_RPT=Short name to specify the customization 02=a unique number Important here is that the HU isn’t used, because XX is enough to mark a custom object, and the 3rd+4th char can be used by the EBS module short name. How to name database objects (tables, packages etc.)? I was leading different developer teams, and I know that one common way is it to take the Customization reference and add more chars behind to classify the object (like _V for view and _T1 for triggers etc.). The only concern I have with this approach is the reusability. If you name your view XXFA_DEPRN_RPT_02_V, no one will by choice reuse this nice view, as it seams to be specific for this CEMLI. My suggestion is rather to name the view XXFA_DEPRN_PERIODS_V and allow herewith reusability for other CEMLIs (although the view will be deployed primarily with CEMLI package XXFA_DEPRN_RPT_02). (check also one of the following Blogs where I will talk about deployment.) How to name Value Sets, Concurrent Programs, etc. For Value Sets I would go with the same convention as for database objects, starting with XX<Module> …. For Concurrent Programs the situation is a bit different. This “object” is seen and used by a lot of users, and they will search for. In many projects it is common to start again with the company short name, or with XX. My proposal would differ. If you have created your own report and you name it “XX: Invoice Report”, the user has to remember that this report does not start with “I”, it starts with X. Would you like typing an X if you are looking for an Invoice report? No, you wouldn’t! So my advise would be to name it:   “Invoice Report (XXAP)”. Still we know it is custom (because of the XXAP), but the end user will type the key “i” to get it (and will see similar reports starting also with “i”). I hope that the general schema behind has now become obvious. How to separate customizations from standard objects best? I would not have this section here if the naming would not play an important role. Unfortunately, we can not always link a custom application to our own object, therefore the naming is really important. In the file system structure we use our $XXyy_TOP, in JAVA_TOP it is perhaps also “xx” in front. But in the database itself? Although there are different concepts in place, still many implementations are using the standard “apps” approach, means custom objects are stored in the apps schema (which should not cause any trouble). Final advise: review the naming conventions regularly, once a month. You may have to add more! And, publish them! To summarize: Technical and functional customized objects should always follow a naming convention. This naming convention should be project wide, and only one place shall be used to maintain (like in a Wiki). If the name is for the end user, rather put a customization identifier at the end; if it is an internal name, start with XX…

    Read the article

  • Copyrighting software, templates, etc. under real name or screen name?

    - by Abluescarab
    My question is hopefully simple--should I copyright my work (art, software, web design, etc.) under my real name or my screen name? My real name and screen name are also easily connected with a bit of searching, so does it really matter in the end? I'm not a professional (at this point). I read this article: Is it a bad idea to sell Android apps in the Android Market under your real name? and they recommended releasing on the app market under a company name. I also read this article: On what name should I claim copyright in open source software?, but that didn't answer my question. I know it probably matters for big projects, but for little projects, does it matter? Thanks ahead of time!

    Read the article

  • Testing smart card minidriver

    - by user352792
    when testing smart card minidriver in windows 7, got the following errors: "cmck exec Reconnect" always show that Testing through CAPI calls Submitting CSP PIN for reader \.\DMWZ ESAFE 0\ CryptAcquireContext - CRYPT_NEWKEYSET CryptGenKey Reconnecting CryptAcquireContext - CRYPT_DELETEKEYSET CryptAcquireContext failed unexpectedly d:\5429t\testsrc\dstest\security\core\credentials\smartcard\cmck\cmck\fnreconnect.cpp Line: 264 WIN32 0x80090016 Keyset does not exist. in windows xp, it always passed. i have no idea! this is my log. in XP: /* P:608 T:3380 8-30-203 CardAcquireContext(): BEGIN /* P:608 T:3380 8-30-203 CardAcquireContext(): SUCCESS /* P:608 T:3380 8-30-203 CardAcquireContext(): BEGIN /* P:608 T:3380 8-30-203 CardAcquireContext(): SUCCESS /* P:608 T:3380 8-31-750 CardAcquireContext(): BEGIN /* P:608 T:3380 8-31-765 CardAcquireContext(): SUCCESS /* P:608 T:3380 8-31-765 CardDeleteContext(): BEGIN /* P:608 T:3380 8-31-765 CardDeleteContext(): SUCCESS /* P:608 T:3380 8-31-765 CardAcquireContext(): BEGIN /* P:608 T:3380 8-31-765 CardAcquireContext(): SUCCESS /* P:608 T:3380 8-31-765 CardDeleteContext(): BEGIN /* P:608 T:3380 8-31-781 CardDeleteContext(): SUCCESS /* P:608 T:3380 8-31-781 CardAcquireContext(): BEGIN /* P:608 T:3380 8-31-781 CardAcquireContext(): SUCCESS /* P:608 T:3380 8-31-781 CardGetChallenge(): BEGIN /* P:608 T:3380 CardGetChallenge(): Challenge = CE568537C1BC9318 / / P:608 T:3380 8-31-781 CardGetChallenge(): SUCCESS /* P:608 T:3380 8-31-796 CardAuthenticateChallenge(): BEGIN /* P:608 T:3380 CardAuthenticateChallenge(): Response = B99E85F50E1F5C29 / / P:608 T:3380 8-31-796 CardAuthenticateChallenge(): SUCCESS /* P:608 T:3380 8-31-812 CardDeauthenticate(): BEGIN /* P:608 T:3380 8-31-812 CardDeauthenticate(): SUCCESS /* P:608 T:3380 8-31-812 CardAuthenticatePin(): BEGIN /* P:608 T:3380 CardAuthenticatePin(): User PIN = 0000 / / P:608 T:3380 8-31-828 CardAuthenticatePin(): SUCCESS /* P:608 T:3380 8-31-828 CardDeauthenticate(): BEGIN /* P:608 T:3380 8-31-843 CardDeauthenticate(): SUCCESS /* P:608 T:3380 8-31-843 CardDeleteContext(): BEGIN /* P:608 T:3380 8-31-843 CardDeleteContext(): SUCCESS /* P:608 T:3380 8-31-859 CardAcquireContext(): BEGIN /* P:608 T:3380 8-31-859 CardAcquireContext(): SUCCESS /* P:608 T:3380 8-31-859 CardAuthenticatePin(): BEGIN /* P:608 T:3380 CardAuthenticatePin(): User PIN = 0000 / / P:608 T:3380 8-31-875 CardAuthenticatePin(): SUCCESS /* P:608 T:3380 8-31-875 CardQueryCapabilities(): BEGIN /* P:608 T:3380 8-31-875 CardQueryCapabilities(): SUCCESS /* P:608 T:3380 8-31-890 CardAuthenticatePin(): BEGIN /* P:608 T:3380 CardAuthenticatePin(): User PIN = 0000 / / P:608 T:3380 8-31-906 CardAuthenticatePin(): SUCCESS /* P:608 T:3380 8-31-906 CardDeauthenticate(): BEGIN /* P:608 T:3380 8-31-921 CardDeauthenticate(): SUCCESS /* P:608 T:3380 8-31-921 CardDeleteContext(): BEGIN /* P:608 T:3380 8-31-921 CardDeleteContext(): SUCCESS /* P:608 T:3380 8-32-0 CardAcquireContext(): BEGIN /* P:608 T:3380 8-32-0 CardAcquireContext(): SUCCESS /* P:608 T:3380 8-32-0 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = ROOT, File Name = cardid / / P:608 T:3380 CardReadFile(): cardid = 34646533393531342D643465662D3432 / / P:608 T:3380 8-32-46 CardReadFile(): SUCCESS /* P:608 T:3380 8-32-62 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardReadFile(): cardcf = 000000000000 / / P:608 T:3380 8-32-109 CardReadFile(): SUCCESS /* P:608 T:3380 8-32-109 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = mscp, File Name = cmapfile / / P:608 T:3380 8-32-187 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardReadFile(): cardcf = 000000000000 / / P:608 T:3380 8-32-234 CardReadFile(): SUCCESS /* P:608 T:3380 8-32-250 CardAuthenticatePin(): BEGIN /* P:608 T:3380 CardAuthenticatePin(): User PIN = 0000 / / P:608 T:3380 8-32-265 CardAuthenticatePin(): SUCCESS /* P:608 T:3380 8-32-265 CardDeauthenticate(): BEGIN /* P:608 T:3380 8-32-281 CardDeauthenticate(): SUCCESS /* P:608 T:3380 8-32-281 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardReadFile(): cardcf = 000000000000 / / P:608 T:3380 8-32-328 CardReadFile(): SUCCESS /* P:608 T:3380 8-32-343 CardQueryFreeSpace(): BEGIN /* P:608 T:3380 8-32-359 CardQueryFreeSpace(): SUCCESS /* P:608 T:3380 8-32-375 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardReadFile(): cardcf = 000000000000 / / P:608 T:3380 8-32-421 CardReadFile(): SUCCESS /* P:608 T:3380 8-32-421 CardAuthenticatePin(): BEGIN /* P:608 T:3380 CardAuthenticatePin(): User PIN = 0000 / / P:608 T:3380 8-32-453 CardAuthenticatePin(): SUCCESS /* P:608 T:3380 8-32-453 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000000000100 / / P:608 T:3380 8-32-531 CardWriteFile(): SUCCESS /* P:608 T:3380 8-32-531 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = mscp, File Name = cmapfile / / P:608 T:3380 CardWriteFile(): cmapfile = 660031006500300035003000300030002D0031003600380038002D0034006200380063002D0039006500300066002D003000310061006200300066006200340062003800660037000000000000000000010000000000 / / P:608 T:3380 8-32-921 CardWriteFile(): SUCCESS /* P:608 T:3380 8-32-921 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000000000200 / / P:608 T:3380 8-33-0 CardWriteFile(): SUCCESS /* P:608 T:3380 8-33-0 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = mscp, File Name = cmapfile / / P:608 T:3380 CardWriteFile(): cmapfile = 660031006500300035003000300030002D0031003600380038002D0034006200380063002D0039006500300066002D003000310061006200300066006200340062003800660037000000000000000000030000000000 / / P:608 T:3380 8-33-109 CardWriteFile(): SUCCESS /* P:608 T:3380 8-33-125 CardQueryCapabilities(): BEGIN /* P:608 T:3380 8-33-125 CardQueryCapabilities(): SUCCESS /* P:608 T:3380 8-33-125 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000001000200 / / P:608 T:3380 8-33-203 CardWriteFile(): SUCCESS /* P:608 T:3380 8-33-203 CardCreateContainer(): BEGIN /* P:608 T:3380 8-35-515 CardCreateContainer(): SUCCESS /* P:608 T:3380 8-35-531 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000001000300 / / P:608 T:3380 8-35-609 CardWriteFile(): SUCCESS /* P:608 T:3380 8-35-609 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = mscp, File Name = cmapfile / / P:608 T:3380 CardWriteFile(): cmapfile = 660031006500300035003000300030002D0031003600380038002D0034006200380063002D0039006500300066002D003000310061006200300066006200340062003800660037000000000000000000030000040000 / / P:608 T:3380 8-35-734 CardWriteFile(): SUCCESS /* P:608 T:3380 8-35-734 CardGetContainerInfo(): BEGIN /* P:608 T:3380 8-35-796 CardGetContainerInfo(): SUCCESS /* P:608 T:5764 8-37-296 CardDeauthenticate(): BEGIN /* P:608 T:5764 8-37-312 CardDeauthenticate(): SUCCESS /* P:608 T:3380 8-37-312 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardReadFile(): cardcf = 000001000300 / / P:608 T:3380 8-37-375 CardReadFile(): SUCCESS /* P:608 T:3380 8-37-375 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardReadFile(): cardcf = 000001000300 / / P:608 T:3380 8-37-437 CardReadFile(): SUCCESS /* P:608 T:3380 8-37-437 CardAuthenticatePin(): BEGIN /* P:608 T:3380 CardAuthenticatePin(): User PIN = 0000 / / P:608 T:3380 8-37-468 CardAuthenticatePin(): SUCCESS /* P:608 T:3380 8-37-484 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000001000400 / / P:608 T:3380 8-37-546 CardWriteFile(): SUCCESS /* P:608 T:3380 8-37-562 CardDeleteFile(): BEGIN /* P:608 T:3380 CardDeleteFile(): Dir Name = mscp, File Name = ksc00 / / P:608 T:3380 8-37-625 CardDeleteFile(): SCARD_E_FILE_NOT_FOUND (0x80100024) /* P:608 T:3380 CardDeleteFile(): FAILED /* P:608 T:3380 8-37-625 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = mscp, File Name = cmapfile / / P:608 T:3380 CardReadFile(): cmapfile = 660031006500300035003000300030002D0031003600380038002D0034006200380063002D0039006500300066002D003000310061006200300066006200340062003800660037000000000000000000030000040000 / / P:608 T:3380 8-37-718 CardReadFile(): SUCCESS /* P:608 T:3380 8-37-718 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000001000500 / / P:608 T:3380 8-37-796 CardWriteFile(): SUCCESS /* P:608 T:3380 8-37-796 CardDeleteFile(): BEGIN /* P:608 T:3380 CardDeleteFile(): Dir Name = mscp, File Name = kxc00 / / P:608 T:3380 8-37-875 CardDeleteFile(): SCARD_E_FILE_NOT_FOUND (0x80100024) /* P:608 T:3380 CardDeleteFile(): FAILED /* P:608 T:3380 8-37-875 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000002000500 / / P:608 T:3380 8-37-953 CardWriteFile(): SUCCESS /* P:608 T:3380 8-37-953 CardDeleteContainer(): BEGIN /* P:608 T:3380 8-38-578 CardDeleteContainer(): SUCCESS /* P:608 T:3380 8-38-593 CardReadFile(): BEGIN /* P:608 T:3380 CardReadFile(): Dir Name = mscp, File Name = cmapfile / / P:608 T:3380 CardReadFile(): cmapfile = 660031006500300035003000300030002D0031003600380038002D0034006200380063002D0039006500300066002D003000310061006200300066006200340062003800660037000000000000000000030000040000 / / P:608 T:3380 8-38-687 CardReadFile(): SUCCESS /* P:608 T:3380 8-38-687 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:608 T:3380 CardWriteFile(): cardcf = 000002000600 / / P:608 T:3380 8-38-781 CardWriteFile(): SUCCESS /* P:608 T:3380 8-38-781 CardWriteFile(): BEGIN /* P:608 T:3380 CardWriteFile(): Dir Name = mscp, File Name = cmapfile / / P:608 T:3380 CardWriteFile(): cmapfile = 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 / / P:608 T:3380 8-38-906 CardWriteFile(): SUCCESS /* P:608 T:5764 8-40-406 CardDeauthenticate(): BEGIN /* P:608 T:5764 8-40-421 CardDeauthenticate(): SUCCESS /* P:608 T:3380 8-40-671 CardDeleteContext(): BEGIN /* P:608 T:3380 8-40-687 CardDeleteContext(): SUCCESS in windows 7: /* P:3368 T:3800 17-39-515 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-39-515 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-39-515 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-39-515 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-39-531 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-39-531 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-39-531 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-39-531 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-187 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-187 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-187 CardDeleteContext(): BEGIN /* P:3368 T:3800 17-41-187 CardDeleteContext(): SUCCESS /* P:3368 T:3800 17-41-187 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-187 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-187 CardDeleteContext(): BEGIN /* P:3368 T:3800 17-41-203 CardDeleteContext(): SUCCESS /* P:3368 T:3800 17-41-203 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-203 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-203 CardDeleteContext(): BEGIN /* P:3368 T:3800 17-41-203 CardDeleteContext(): SUCCESS /* P:3368 T:3800 17-41-203 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-203 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-218 CardDeleteContext(): BEGIN /* P:3368 T:3800 17-41-218 CardDeleteContext(): SUCCESS /* P:3368 T:3800 17-41-218 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-218 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-218 CardGetChallenge(): BEGIN /* P:3368 T:3800 CardGetChallenge(): Challenge = BF830855CDCA4F0D / / P:3368 T:3800 17-41-234 CardGetChallenge(): SUCCESS /* P:3368 T:3800 17-41-234 CardAuthenticateChallenge(): BEGIN /* P:3368 T:3800 CardAuthenticateChallenge(): Response = A2DB6F882D402D94 / / P:3368 T:3800 17-41-234 CardAuthenticateChallenge(): SUCCESS /* P:3368 T:3800 17-41-234 CardDeauthenticate(): BEGIN /* P:3368 T:3800 17-41-250 CardDeauthenticate(): SUCCESS /* P:3368 T:3800 17-41-250 CardAuthenticatePin(): BEGIN /* P:3368 T:3800 CardAuthenticatePin(): User PIN = 0000 / / P:3368 T:3800 17-41-265 CardAuthenticatePin(): SUCCESS /* P:3368 T:3800 17-41-265 CardDeauthenticate(): BEGIN /* P:3368 T:3800 17-41-265 CardDeauthenticate(): SUCCESS /* P:3368 T:3800 17-41-265 CardDeleteContext(): BEGIN /* P:3368 T:3800 17-41-281 CardDeleteContext(): SUCCESS /* P:3368 T:3800 17-41-281 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-281 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-281 CardAuthenticatePin(): BEGIN /* P:3368 T:3800 CardAuthenticatePin(): User PIN = 0000 / / P:3368 T:3800 17-41-296 CardAuthenticatePin(): SUCCESS /* P:3368 T:3800 17-41-296 CardQueryCapabilities(): BEGIN /* P:3368 T:3800 17-41-296 CardQueryCapabilities(): SUCCESS /* P:3368 T:3800 17-41-296 CardAuthenticatePin(): BEGIN /* P:3368 T:3800 CardAuthenticatePin(): User PIN = 0000 / / P:3368 T:3800 17-41-312 CardAuthenticatePin(): SUCCESS /* P:3368 T:3800 17-41-312 CardDeauthenticate(): BEGIN /* P:3368 T:3800 17-41-328 CardDeauthenticate(): SUCCESS /* P:3368 T:3800 17-41-328 CardDeleteContext(): BEGIN /* P:3368 T:3800 17-41-328 CardDeleteContext(): SUCCESS /* P:3368 T:3800 17-41-359 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-359 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-359 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardid / / P:3368 T:3800 CardReadFile(): cardid = 34363438653733652D346430342D3463 / / P:3368 T:3800 17-41-406 CardReadFile(): SUCCESS /* P:3368 T:3800 17-41-406 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardReadFile(): cardcf = 000000000000 / / P:3368 T:3800 17-41-453 CardReadFile(): SUCCESS /* P:3368 T:3800 17-41-453 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = mscp, File Name = cmapfile / / P:3368 T:3800 17-41-531 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardReadFile(): cardcf = 000000000000 / / P:3368 T:3800 17-41-593 CardReadFile(): SUCCESS /* P:3368 T:3800 17-41-593 CardAuthenticatePin(): BEGIN /* P:3368 T:3800 CardAuthenticatePin(): User PIN = 0000 / / P:3368 T:3800 17-41-609 CardAuthenticatePin(): SUCCESS /* P:3368 T:3800 17-41-609 CardDeauthenticate(): BEGIN /* P:3368 T:3800 17-41-609 CardDeauthenticate(): SUCCESS /* P:3368 T:3800 17-41-609 CardDeleteContext(): BEGIN /* P:3368 T:3800 17-41-625 CardDeleteContext(): SUCCESS /* P:3368 T:3800 17-41-625 CardAcquireContext(): BEGIN /* P:3368 T:3800 17-41-625 CardAcquireContext(): SUCCESS /* P:3368 T:3800 17-41-625 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardid / / P:3368 T:3800 CardReadFile(): cardid = 34363438653733652D346430342D3463 / / P:3368 T:3800 17-41-671 CardReadFile(): SUCCESS /* P:3368 T:3800 17-41-687 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardReadFile(): cardcf = 000000000000 / / P:3368 T:3800 17-41-734 CardReadFile(): SUCCESS /* P:3368 T:3800 17-41-734 CardQueryFreeSpace(): BEGIN /* P:3368 T:3800 17-41-750 CardQueryFreeSpace(): SUCCESS /* P:3368 T:3800 17-41-750 CardAuthenticatePin(): BEGIN /* P:3368 T:3800 CardAuthenticatePin(): User PIN = 0000 / / P:3368 T:3800 17-41-765 CardAuthenticatePin(): SUCCESS /* P:3368 T:3800 17-41-765 CardWriteFile(): BEGIN /* P:3368 T:3800 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardWriteFile(): cardcf = 000000000100 / / P:3368 T:3800 17-41-828 CardWriteFile(): SUCCESS /* P:3368 T:3800 17-41-828 CardWriteFile(): BEGIN /* P:3368 T:3800 CardWriteFile(): Dir Name = mscp, File Name = cmapfile / / P:3368 T:3800 CardWriteFile(): cmapfile = 370062003800640030006200390031002D0063003600650064002D0034003000650033002D0062006100610037002D006200620032003800640063003800610035003300330032000000000000000000010000000000 / / P:3368 T:3800 17-42-218 CardWriteFile(): SUCCESS /* P:3368 T:3800 17-42-234 CardWriteFile(): BEGIN /* P:3368 T:3800 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardWriteFile(): cardcf = 000000000200 / / P:3368 T:3800 17-42-296 CardWriteFile(): SUCCESS /* P:3368 T:3800 17-42-296 CardWriteFile(): BEGIN /* P:3368 T:3800 CardWriteFile(): Dir Name = mscp, File Name = cmapfile / / P:3368 T:3800 CardWriteFile(): cmapfile = 370062003800640030006200390031002D0063003600650064002D0034003000650033002D0062006100610037002D006200620032003800640063003800610035003300330032000000000000000000030000000000 / / P:3368 T:3800 17-42-390 CardWriteFile(): SUCCESS /* P:3368 T:3800 17-42-406 CardQueryCapabilities(): BEGIN /* P:3368 T:3800 17-42-406 CardQueryCapabilities(): SUCCESS /* P:3368 T:3800 17-42-406 CardWriteFile(): BEGIN /* P:3368 T:3800 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardWriteFile(): cardcf = 000001000200 / / P:3368 T:3800 17-42-468 CardWriteFile(): SUCCESS /* P:3368 T:3800 17-42-468 CardCreateContainer(): BEGIN /* P:3368 T:3800 17-48-421 CardCreateContainer(): SUCCESS /* P:3368 T:3800 17-48-437 CardWriteFile(): BEGIN /* P:3368 T:3800 CardWriteFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardWriteFile(): cardcf = 000001000300 / / P:3368 T:3800 17-48-484 CardWriteFile(): SUCCESS /* P:3368 T:3800 17-48-500 CardWriteFile(): BEGIN /* P:3368 T:3800 CardWriteFile(): Dir Name = mscp, File Name = cmapfile / / P:3368 T:3800 CardWriteFile(): cmapfile = 370062003800640030006200390031002D0063003600650064002D0034003000650033002D0062006100610037002D006200620032003800640063003800610035003300330032000000000000000000030000040000 / / P:3368 T:3800 17-48-593 CardWriteFile(): SUCCESS /* P:3368 T:3800 17-48-593 CardGetContainerInfo(): BEGIN /* P:3368 T:3800 17-48-640 CardGetContainerInfo(): SUCCESS /* P:3368 T:288 17-50-140 CardDeauthenticate(): BEGIN /* P:3368 T:288 17-50-140 CardDeauthenticate(): SUCCESS /* P:3368 T:3800 17-50-140 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardid / / P:3368 T:3800 CardReadFile(): cardid = 34363438653733652D346430342D3463 / / P:3368 T:3800 17-50-187 CardReadFile(): SUCCESS /* P:3368 T:3800 17-50-187 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardcf / / P:3368 T:3800 CardReadFile(): cardcf = 000001000300 / / P:3368 T:3800 17-50-234 CardReadFile(): SUCCESS /* P:3368 T:3800 17-50-234 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardid / / P:3368 T:3800 CardReadFile(): cardid = 34363438653733652D346430342D3463 / / P:3368 T:3800 17-50-296 CardReadFile(): SUCCESS /* P:3368 T:3800 17-50-296 CardReadFile(): BEGIN /* P:3368 T:3800 CardReadFile(): Dir Name = ROOT, File Name = cardid / / P:3368 T:3800 CardReadFile(): cardid = 34363438653733652D346430342D3463 / / P:3368 T:3800 17-50-343 CardReadFile(): SUCCESS Comparing the two logs, it seems that in win 7 cmck always read file, read file, read file... and fail, never get into CardDeleteContainer or CardWriteFile :( Please help me!!!! Many thanks!

    Read the article

  • How to accommodate for the iPhone 4 screen resolution?

    - by dontWatchMyProfile
    This is a programming question! Read on before you vote to close! According to Apple, the iPhone 4 has a new and better screen resolution: 3.5-inch (diagonal) widescreen Multi-Touch display 960-by-640-pixel resolution at 326 ppi This little detail affects our apps in a heavy way. Most of the demo apps on the net have one thing in common: They position views in the believe that the screen has a fixed size of 320 x 480 pixels. So what most -if not all- developers do is: They designed everything in such a way, that a touchable area is -for example- 50 x 50 pixels big. Just enough to tap it. Things have been positioned relative to the upper left, to reach a specific position on screen - let's say the center, or somewhere at the bottom. Edit: It seems Apple has integrated an switch that allows to tell if an app is highRes or not. Nice. When we develop high-resolution apps, they probably won't work on older devices. And if they do, they would suffer a lot from 4-times the size of any image, having to scale them down in memory.

    Read the article

  • Dual Monitors for Windows 8

    - by antonio081014
    I have one monitor and a projector connecting to my computer, while the screen keep flashing after every 10 seconds, it seems the resolution keeps changing. The project is the a dual display for the monitor. They displays the same content. My current resolution is 1024*768, while after 10 seconds around, the resolution goes to something big, then after a few seconds, it goes back to 1024*768. I wonder if this is a problem about the resolution, or it's about the compatible of screen display?

    Read the article

  • Rails 2.3.5 model name translation problem in error messages

    - by Jason Nerer
    Hi Rails'ers, I encountered some problem while trying to translate my model's names and attributes in a Rails 2.3.5 app. I have the following model: class BillingPlan < ActiveRecord::Base validates_presence_of :billing_option_id belongs_to :order belongs_to :user belongs_to :billing_option end When validation fails, my models attributes are translated correctly, but the modelname itself is not. I use the following translation skeleton in de.yml de: activerecord: models: shipping_plan: "Versandart" billing_plan: "Rechnungsart" attributes: shipping_plan: shipping_option_id: "Versandoption" billing_plan: billing_option_id: "Rechnungsoption" Basis for my translation file is: http://github.com/svenfuchs/rails-i18n/blob/master/rails/locale/de.yml Can anyone help? Thx in advance J.

    Read the article

  • How can I make PDFs appear life-size when displayed at 100%?

    - by ændrük
    When I open a letter size PDF and then zoom to 100%, the page physically displayed on my monitor is smaller than a real letter size sheet of paper. How can I make "100%" on the computer screen correspond with "100%" in real life? Details This message suggests that I should be investigating the system-wide DPI settings for my monitor. xdpyinfo reports: dimensions: 1024x768 pixels (271x203 millimeters) resolution: 96x96 dots per inch My monitor has a native display resolution of 1024x768 pixels and a diagonal display size of 12.07 inches. PX CALC returns the following information: DPI: 106.05 Dot Pitch: 0.2395mm Size: 9.66" × 7.24" (24.53cm × 18.39cm) What I've tried so far Running xrandr --dpi 106.05 successfully caused my PDF to appear actual size at 100%, but this effect was lost after rebooting. To make the setting persistent I tried creating the following /etc/X11/xorg.conf: Section "Monitor" Identifier "ThinkPad X60 LCD" DisplaySize 245 183 EndSection Section "Screen" Identifier "Screen0" Monitor "ThinkPad X60 LCD" EndSection After re-logging in, /var/log/Xorg.0.log contained [ 1167.824] (**) intel(0): Display dimensions: (245, 183) mm [ 1167.824] (**) intel(0): DPI set to (106, 106) but xdpyinfo still reported dimensions: 1024x768 pixels (271x203 millimeters) resolution: 96x96 dots per inch and "100%" still appeared too small. Link to XRANDR wiki Link to making XRANDR changes persistant

    Read the article

  • PHP incomplete code - scan dir, include only if name starts or end with x

    - by Adrian M.
    I posted a question before but I am yet limited to mix the code without getting errors.. I'm rather new to php :( ( the dirs are named in series like this "id_1_1" , "id_1_2", "id_1_3" and "id_2_1" , "id_2_2", "id_2_3" etc.) I have this code, that will scan a directory for all the files and then include a same known named file for each of the existing folders.. the problem is I want to modify a bit the code to only include certain directories which their names: ends with "_1" starts with "id_1_" I want to create a page that will load only the dirs that ends with "_1" and another file that will load only dirs that starts with "id_1_".. <?php include_once "$root/content/common/header.php"; include_once "$root/content/common/header_bc.php"; include_once "$root/content/" . $page_file . "/content.php"; $page_path = ("$root/content/" . $page_file); $includes = array(); $iterator = new RecursiveIteratorIterator( new RecursiveDirectoryIterator($page_path), RecursiveIteratorIterator::SELF_FIRST); foreach($iterator as $file) { if($file->isDir()) { $includes[] = strtoupper($file . '/template.php'); } } $includes = array_reverse($includes); foreach($includes as $file){ include $file; } include_once "$root/content/common/footer.php"; ?> Many Thanks!

    Read the article

  • Use TV (hdmi) with non-square pixels

    - by labsin
    I am having a problem when I connect my LG plasma tv (with a native resolution of 1024x768 pixels) to my 12.04 laptop. The pixels (actual pixels, not the signal) of my TV are stretched so it gets his 16:9 ratio. The pixels are rectangular (1.3333x1). Everything I display from my laptop oviously get stretched (4:3 stretched to 16:9). There is a different dpi in X and Y needed for it to display properly (some kind of anamorphic mode). Default Ubuntu uses a dpi of 96x96. I can change it using xrandr, but only square eg 100x100 or 70x70. Already looked here, but it seems Ubuntu totally ignore the displaySize in xorg.conf When I use the code below to see the dpi and nothing I do changes it. The displaySize also stays the same (calculated using 96 dpi and the resolution) xdpyinfo | grep -B2 resolution I use the propretary ATI drivers for my ATI Mobility Radeon HD 50xx but it is the same with the Radeon drivers. My temporary solution is to use: xrandr --output DFP1 --mode 1024x768 --scale 1.333333333333x1 --output LVDS --off But with this the right side of the screen is nog accesable. This is a known problem with xrandr --scale and ubuntu. This is because of a patch for the mouse/windows not going outside the screen. I search a way to change the DisplaySize or the dpi(to something not square like 128x96) when I connect the display.

    Read the article

  • Writing custom Message Formatter for SOAP basicHttpBinding

    - by Lijo
    I have a WSDL published by our service development team. It is using SOAP and basicHttpBinding. I can add the service reference to the project using Add Service Reference option in Visual Studio. I need to develop the WCF client. I need to use custom Message Formatter (for mapping between Messages and CLR types). Can you please show how to write the custom Message Formatter (in C# )for the following wsdl? Note: I am planning to use custom Message Formatter due to an issue mentioned in http://stackoverflow.com/questions/12316884/header-namespace-mismatch-issue WSDL <definitions xmlns:import0="urn:thinktecture-com:demos:restaurantservice:data:v1" xmlns:import2="urn:thinktecture-com:demos:restaurantservice:messages:v1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:import1="urn:thinktecture-com:demos:restaurantservice:headerdata:v1" xmlns:tns="urn:thinktecture-com:demos:restaurantservice:wsdl:v1" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" name="RestauarntService" targetNamespace="urn:thinktecture-com:demos:restaurantservice:wsdl:v1" xmlns="http://schemas.xmlsoap.org/wsdl/"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <types> <xsd:schema> <xsd:import schemaLocation="RestaurantData.xsd" namespace="urn:thinktecture-com:demos:restaurantservice:data:v1" /> <xsd:import schemaLocation="RestaurantHeaderData.xsd" namespace="urn:thinktecture-com:demos:restaurantservice:headerdata:v1" /> <xsd:import schemaLocation="RestaurantMessages.xsd" namespace="urn:thinktecture-com:demos:restaurantservice:messages:v1" /> </xsd:schema> </types> <message name="getRestaurantsIn"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <part name="parameters" element="import2:getRestaurants" /> </message> <message name="getRestaurantsOut"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <part name="parameters" element="import2:getRestaurantsResponse" /> </message> <message name="lijosCustomFaultMessage"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <part name="fault" element="import2:customFault" /> </message> <message name="userCredentialsIn"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <part name="parameters" element="import1:userCredentials" /> </message> <message name="addRestaurantIn"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <part name="parameters" element="import2:addRestaurant" /> </message> <message name="addRestaurantInHeader1"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <part name="parameters" element="import1:userCredentials" /> </message> <message name="customFaultIn"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <part name="parameters" element="import2:customFault" /> </message> <portType name="RestauarntServiceInterface"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <operation name="getRestaurants"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <input message="tns:getRestaurantsIn" /> <output message="tns:getRestaurantsOut" /> <fault name="lijosCustomFaultMessage" message="tns:lijosCustomFaultMessage" /> </operation> <operation name="userCredentials"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <input message="tns:userCredentialsIn" /> </operation> <operation name="addRestaurant"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <input message="tns:addRestaurantIn" /> </operation> <operation name="customFault"> <wsdl:documentation xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" /> <input message="tns:customFaultIn" /> </operation> </portType> <binding name="BasicHttpBinding_RestauarntServiceInterface" type="tns:RestauarntServiceInterface"> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" /> <operation name="getRestaurants"> <soap:operation soapAction="urn:thinktecture-com:demos:restaurantservice:wsdl:v1:getRestaurantsIn" style="document" /> <input> <soap:body use="literal" /> </input> <output> <soap:body use="literal" /> </output> <fault name="lijosCustomFaultMessage"> <soap:fault use="literal" name="lijosCustomFaultMessage" namespace="" /> </fault> </operation> <operation name="userCredentials"> <soap:operation soapAction="urn:thinktecture-com:demos:restaurantservice:wsdl:v1:userCredentialsIn" style="document" /> <input> <soap:body use="literal" /> </input> </operation> <operation name="addRestaurant"> <soap:operation soapAction="urn:thinktecture-com:demos:restaurantservice:wsdl:v1:addRestaurantIn" style="document" /> <input> <soap:body use="literal" /> <soap:header message="tns:addRestaurantInHeader1" part="parameters" use="literal" /> </input> </operation> <operation name="customFault"> <soap:operation soapAction="urn:thinktecture-com:demos:restaurantservice:wsdl:v1:customFaultIn" style="document" /> <input> <soap:body use="literal" /> </input> </operation> </binding> <service name="RestauarntServicePort"> <port name="RestauarntServicePort" binding="tns:BasicHttpBinding_RestauarntServiceInterface"> <soap:address location="http://localhost/RestauarntService" /> </port> </service> </definitions>?? RestaurantData.xsd <?xml version="1.0" encoding="utf-8" ?> <xs:schema id="RestaurantData" targetNamespace="urn:thinktecture-com:demos:restaurantservice:data:v1" elementFormDefault="qualified" xmlns="urn:thinktecture-com:demos:restaurantservice:data:v1" xmlns:mstns="urn:thinktecture-com:demos:restaurantservice:data:v1" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:complexType name="restaurantInfo"> <xs:sequence> <xs:element name="restaurantID" type="xs:int" /> <xs:element name="name" type="xs:string" /> <xs:element name="address" type="xs:string" /> <xs:element name="city" type="xs:string" /> <xs:element name="state" type="xs:string" /> <xs:element name="zip" type="xs:string" /> <xs:element name="openFrom" type="xs:time" /> <xs:element name="openTo" type="xs:time" /> </xs:sequence> </xs:complexType> <xs:complexType name="restaurantsList"> <xs:sequence> <xs:element name="restaurant" type="restaurantInfo" maxOccurs="unbounded" minOccurs="0" /> </xs:sequence> </xs:complexType> <xs:complexType name="customFault"> <xs:sequence> <xs:element name="errorCode" type="xs:string"/> <xs:element name="message" type="xs:string"/> <xs:element maxOccurs="unbounded" minOccurs="0" name="messages" type="xs:string" /> </xs:sequence> </xs:complexType> </xs:schema> RestaurantHeaderData.xsd <?xml version="1.0" encoding="utf-8" ?> <xs:schema id="RestaurantHeaderData" targetNamespace="urn:thinktecture-com:demos:restaurantservice:headerdata:v1" elementFormDefault="qualified" xmlns="urn:thinktecture-com:demos:restaurantservice:headerdata:v1" xmlns:mstns="urn:thinktecture-com:demos:restaurantservice:headerdata:v1" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:complexType name="credentials"> <xs:sequence> <xs:element name="username" type="xs:string" /> <xs:element name="password" type="xs:string" /> </xs:sequence> </xs:complexType> <xs:element name="userCredentials" type="credentials"> </xs:element> </xs:schema> ? RestaurantMessages.xsd <?xml version="1.0" encoding="utf-8" ?> <xs:schema id="RestaurantMessages" targetNamespace="urn:thinktecture-com:demos:restaurantservice:messages:v1" elementFormDefault="qualified" xmlns="urn:thinktecture-com:demos:restaurantservice:messages:v1" xmlns:mstns="urn:thinktecture-com:demos:restaurantservice:messages:v1" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:import="urn:thinktecture-com:demos:restaurantservice:data:v1"> <xs:import id="RestaurantData" schemaLocation="RestaurantData.xsd" namespace="urn:thinktecture-com:demos:restaurantservice:data:v1"> </xs:import> <xs:element name="getRestaurants"> <xs:complexType> <xs:sequence> <xs:element name="zip" type="xs:string" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="getRestaurantsResponse"> <xs:complexType> <xs:sequence> <xs:element name="restaurants" type="import:restaurantsList" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="addRestaurant"> <xs:complexType> <xs:sequence> <xs:element name="restaurant" type="import:restaurantInfo" /> </xs:sequence> </xs:complexType> </xs:element> <xs:element name="customFault" type="import:customFault" /> </xs:schema>

    Read the article

  • Get domain name (not subdomain) in php

    - by Cyclone
    I have a URL which can be any of the following formats: http://example.com https://example.com http://example.com/foo http://example.com/foo/bar www.example.com example.com foo.example.com www.foo.example.com foo.bar.example.com http://foo.bar.example.com/foo/bar example.net/foo/bar Essentially, I need to be able to match any normal URL. How can I extract example.com (or .net, whatever the tld happens to be. I need this to work with any TLD.) from all of these via a single regex? This is in PHP. Thanks for the help!

    Read the article

  • Personal name generator

    - by Gia
    Hi all, I would like to populate my database with randomly generated personal names. Would you know any software tool (no web pages!) that can help me achieving this? I will need to generate at leat 5,000 personal names. Thank you.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >