Search Results

Search found 3942 results on 158 pages for 'no sound'.

Page 20/158 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • How can I control which sound card Ubuntu uses for playback?

    - by GorillaSandwich
    I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

    Read the article

  • How can I make sound over hdmi in kubuntu work?

    - by user32509
    I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :)

    Read the article

  • Kde no sound from Phonon or most KDE apps but mplayer,skype and firefox are ok

    - by zeonglow
    Can somebody tell me why I cannot get any sound with most of KDE 4? I'm running a Gentoo box, I'm in both the 'audio' and 'video' groups. I can get sound with mplayer ( but not smplayer ) Firefox and Skype but nothing else. I can't get the test sound to play from the settings window, but Phonon is not whining about broken sound cards when I start up. I have checked with kmix, we seem to be completely unmuted ( and I can get sound with some apps)

    Read the article

  • Debian sound on hdmi instead of jack

    - by Hans de Jong
    I installed debian (gnome) and i can't get my sound working. When i use inxi -A i get the following result: Audio: Card-1: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] driver: snd_hda_intel Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel Sound: Advanced Linux Sound Architecture ver: 1.0.24 My feeling tells me my sound output is on the HDMI instead of my jackplug on my motherboard. How can i change this to my motherboard sound output?

    Read the article

  • What output and recording ports does the Java Sound API find on your computer?

    - by Dave Carpeneto
    Hi all - I'm working with the Java Sound API, and it turns out if I want to adjust recording volumes I need to model the hardware that the OS exposes to Java. Turns out there's a lot of variety in what's presented. Because of this I'm humbly asking that anyone able to help me run the following on their computer and post back the results so that I can get an idea of what's out there. A thanks in advance to anyone that can assist :-) import javax.sound.sampled.*; public class SoundAudit { public static void main(String[] args) { try { System.out.println("OS: "+System.getProperty("os.name")+" "+ System.getProperty("os.version")+"/"+ System.getProperty("os.arch")+"\nJava: "+ System.getProperty("java.version")+" ("+ System.getProperty("java.vendor")+")\n"); for (Mixer.Info thisMixerInfo : AudioSystem.getMixerInfo()) { System.out.println("Mixer: "+thisMixerInfo.getDescription()+ " ["+thisMixerInfo.getName()+"]"); Mixer thisMixer = AudioSystem.getMixer(thisMixerInfo); for (Line.Info thisLineInfo:thisMixer.getSourceLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Source Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}} for (Line.Info thisLineInfo:thisMixer.getTargetLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Target Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}}} } catch (Exception e) {e.printStackTrace();}} public static String AnalyzeControl(Control thisControl) { String type = thisControl.getType().toString(); if (thisControl instanceof BooleanControl) { return " Control: "+type+" (boolean)"; } if (thisControl instanceof CompoundControl) { System.out.println(" Control: "+type+ " (compound - values below)"); String toReturn = ""; for (Control children: ((CompoundControl)thisControl).getMemberControls()) { toReturn+=" "+AnalyzeControl(children)+"\n";} return toReturn.substring(0, toReturn.length()-1);} if (thisControl instanceof EnumControl) { return " Control:"+type+" (enum: "+thisControl.toString()+")";} if (thisControl instanceof FloatControl) { return " Control: "+type+" (float: from "+ ((FloatControl) thisControl).getMinimum()+" to "+ ((FloatControl) thisControl).getMaximum()+")";} return " Control: unknown type";} } All the application does is print out a line about the OS, a line about the JVM, and a few lines about the hardware found that may pertain to recording hardware. For example on my PC at work I get the following: OS: Windows XP 5.1/x86 Java: 1.6.0_07 (Sun Microsystems Inc.) Mixer: Direct Audio Device: DirectSound Playback [Primary Sound Driver] Mixer: Direct Audio Device: DirectSound Playback [SoundMAX HD Audio] Mixer: Direct Audio Device: DirectSound Capture [Primary Sound Capture Driver] Mixer: Direct Audio Device: DirectSound Capture [SoundMAX HD Audio] Mixer: Software mixer and synthesizer [Java Sound Audio Engine] Mixer: Port Mixer [Port SoundMAX HD Audio] Source Port: MICROPHONE source port Control: Microphone (compound - values below) Control: Select (boolean) Control: Microphone Boost (boolean) Control: Front panel microphone (boolean) Control: Volume (float: from 0.0 to 1.0) Source Port: LINE_IN source port Control: Line In (compound - values below) Control: Select (boolean) Control: Volume (float: from 0.0 to 1.0) Control: Balance (float: from -1.0 to 1.0)

    Read the article

  • Sound vs. Valid Argument

    - by MarkPearl
    Today I spent some time reviewing my Formal Logic course for my up coming exam. I came across a section that I have never really explored in any proper depth… the difference between a valid argument and a sound argument. Here go some notes I made… What is an argument? In this case we are not referring to a verbal fight, but more what we call a set of premise followed by a conclusion. Before we go further we need to understand what a premise is… a premise is a statement that an argument claims will induce or justify a conclusion. Think of a premise as an assumption that something is true. So, an argument can consist of one or more premises and a conclusion… When is an argument valid? An argument can be either valid or invalid. An argument is valid if, and only if, it is impossible for there to be a situation in which all it's premises are TRUE and it's conclusion is FALSE. It is generally easier to determine if an argument is invalid. Do this by applying the following… Assume that all the premises are true, then ask yourself if it is now possible for the conclusion to be false. If the answer is "yes," the argument is invalid. If it's "no," the argument is valid. Example 1… P1 – Mark is Tall P2 – Mark is a boy C –  Mark is a tall boy Walkthrough 1… Assume Mark is Tall is true and also assume that Mark is a boy. Based on these two premises, the conclusion is also true – Mark is a tall boy, thus the it is a valid argument. Let’s make this an invalid argument…   Example 2… P1 – Mark is Tall P2 – Mark is a boy C – Mark is a short boy Walkthrough 2… This would be an invalid argument, since from the premises we assume that Mark is tall and he is a boy, and then the conclusion goes against this by saying that Mark is short. Thus an invalid argument.   When is an argument sound? An argument is said to be sound when it is valid and all the premises are indeed true (not just assumed to be true). Rephrased, an argument is said to be sound when the conclusion will follow from the premises and the premises are indeed true in real life. In example 1 we were referring to a specific person, if we generalized it a bit we could come up with the following example.   Example 3 P1 – All people called Mark are tall P2 – I know a specific person called Mark C – He is a tall person   In this instance, it is a valid argument (we assume the premises are true, which leads to the conclusion being true), but the argument is NOT sound. In the real world there must be at least one person called Mark who is not tall. Something also to note, all invalid arguments are also unsound – this makes sense, if an argument is not valid, how on earth can it be true in the real world.   What happens when the premises contradict themselves? This is an interesting one… An argument is valid if, and only if, it is impossible for there to be a situation in which all it's premises are TRUE and it's conclusion is FALSE. When premises are contradictory, the argument is always valid because it is impossible for all the premises to be true at one time. Lets look at an example.. P1 - Elvis is dead P2 – Elvis is alive C – Laura is a woolly mammoth This is a valid argument, but not a sound one. Think about it. Is it possible to have a situation in which the premises are true and the conclusion is false? Sure, it's possible to have a situation in which the conclusion is false, but for the argument to be invalid, it has to be possible for the premises to all be true at the same time the conclusion is false. So if the premises can't all be true, the argument is valid. (If you still think the argument is invalid, draw a picture in which the premises are all true and the conclusion is false. Remember, there's only one Elvis, and you can't be both dead and alive.) For more info on this I suggest reading the following blog post.

    Read the article

  • Sound plays from laptop speakers only even when headphones are connected

    - by Ankush N Nayak
    I'm using a Dell Vostro 1014 laptop with Ubuntu 11.10. From the time I had Ubuntu 9.04, sound comes from the laptop speakers only even when I plug in earphones or external speakers. Also, if an external microphone plugged in, it does not work. Dell even replaced my motherboard to check for hardware issues but the problem persists. So it is definitely not a hardware issue. The sound plays perfectly through the headphones in the pre-boot diagnostics. So I figure, this must be a problem with Ubuntu not recognizing my sound card. Please try to give a solution for this problem.

    Read the article

  • Ubuntu cant load sound cart

    - by Reza Marefaty
    I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

    Read the article

  • No sound after clean install

    - by John Cheednik
    Did a clean install of Ubuntu 12.10 and everything working great except for the sound. Ubuntu doesn't even seem to be recognizing the fact my HP dv6000 has the capability of making sound! I have the dummy output problem, and when I try to open alsamixer using terminal I get the message that no such file or directory exists. I can't get it to recognize any soundcards or audio devices at all. I've been working on the problem for a couple days now and have even taken the laptop apart to ensure that all cables are properly attached... When I go into the PhoenixBIOS there are no sound options that I can find. The laptop does make a loud beep if I press buttons in the BIOS, but once it boots to the hard drive, the thing is mute. HELP!

    Read the article

  • Kubuntu permanent install won't attach sound card

    - by rob
    I installed Kubuntu Live version and sound card visible in the volume/mixer panel. After installing the permanent version I have a dummy output where my sound card should be, therefore no sound. I re-installed the live version three times and then to permanent but the same problem each time. There is a very brief error on boot up to the permanent version that says: error. cannot attach card default. no such file or directory. I'm running Kubuntu 12.04 on a Mac G4 PPC with no other OS. I'm very new to Linux. I am able to follow instructions to help resolve this, but I'm not familiar with the OS.

    Read the article

  • Sound does not work on the administrator profile.Works on a non-administrator profile on Windows XP

    - by Sharjeel Sayed
    Initially I suspected a missing driver, but then sound ( for movies,songs etc ) works fine on the other non-administrator account, but does not work when I log in to the Administrator account. And yes..I have checked the sound volume and mute status as well. Details of my system OS: Windows XP Professional Service Pack 3 (build 2600) Processor: 2.00 gigahertz AMD Athlon 64 Memory: 448 Megabytes Usable Installed Memory Board: ASUSTeK Computer Inc. K8V-MX Bus Clock: 200 megahertz BIOS: American Megatrends Inc. 0112 07/18/2005 Multimedia: SoundMAX Integrated Digital Audio Any help would be appreciated.Thanks in advance

    Read the article

  • Why doesn't my sound card start? It reports code 10.

    - by Sarim Ali
    When I installed the XP for first time my sound card was working fine. But only after the first reboot it has stopped working. Under Device Manager, the section "sound video and game controller" the entry YAMAHA Native DS1 WDM Driver, has a exclamation mark on it. On left clicking and selecting properties it shows this message "This device cannot start. (Code 10)". On trying to update driver it says a better driver can not be found. Any idea how I can solve the issue? Update: As suggested by harrymc I uninstalled the device "YAMAHA Native DS1 WDM Driver" , and scanned for hardware changes. The windows detected and installed the soundcard and it started working properly.BUT, after restarting the same problem occurs. So, now everytime I reboot the computer I am stuck to, repeating the process of uninstalling the device to make it work.

    Read the article

  • Which app has a notification sound with 3 descending notes?

    - by Eric
    Brand new Windows 7 box loaded with the usual dev tools -- VS2008, Firefox, Chatzilla, Thunderbird, emacs, Pidgin, Putty, iTunes, SharpReader. Every couple of minutes, I get an audio notification consisting of three rising notes, maybe a middle-C-G-F on a piano (I don't have a piano handy, and don't have time to use GarageBand to try to figure it out). Nothing in the notification bar is flashing when this happens. The sound isn't in any of the Windows Sound control panel applets. And it's not in C:\Windows\Media, so it's most likely coming from a non-Microsoft app. Any chance it's Pidgin when the status one of my contact's changes (which happens plenty frequently)? Oh, look at this --- Tools/Mute Sounds. Let's try that and see what happens... Is this familiar to anyone?

    Read the article

  • Is there a way to turn off the sound that plays when my computer reconnects to the wireless network?

    - by Dan Tao
    I know this seems silly. Obviously I could mute my computer, or turn the speakers off. But it seems like surely there should be a way that I can keep all of my normal computer sounds without having to hear this one sound (no, it doesn't really bother me; mostly my wife just wants me to turn it off because she finds it annoying). I tried right-clicking on the volume icon in the notification area and went through all of the sounds in the list, thinking I could find the one offending noise and just turn it off. But none of them seem to correspond to the sound that plays when my wireless adapter randomly disconnects and reconnects to the wireless network.

    Read the article

  • How to switch a Sound Ouput Device before the Mac goes to sleep?

    - by Konzepz
    I've connected my MacBook to a set of external speakers with a USB. Now, every time the computer goes to Sleep Mode, there's an awful static sound coming from the speakers. I guess this is some bad wiring; but that's what I've got. However, I can use an idea for a script (AppleScript, bash, whatever) that will switch off the USB output sound in (System Preferences) before the computer goes to sleep, and will switch it back on (if exists) on Wake. Any ideas? Thanks!

    Read the article

  • Windows7: Which app has a notification sound with 3 descending notes?

    - by Eric
    Brand new Win7 box loaded with the usual dev tools -- VS2008, Firefox, Chatzilla, Thunderbird, emacs, Pidgin, Putty, iTunes, SharpReader. Every couple of minutes, I get an audio notification consisting of three rising notes, maybe a middle-C-G-F on a piano (I don't have a piano handy, and don't have time to use GarageBand to try to figure it out). Nothing in the notification bar is flashing when this happens. The sound isn't in any of the Windows Sound control panel applets. And it's not in C:\Windows\Media, so it's most likely coming from a non-Microsoft app. Is this familiar to anyone?

    Read the article

  • Is there software that can visualize all sounds from the sound card?

    - by bentsai
    I'm looking for a solution to this problem: When I'm working at my computer, sometimes I'll be using noise-isolation headphones connected to a source other than my computer (e.g., an iPod). I would like to see (this is what I mean by "visualize") some kind of notification on my screen, since I will not be able to hear the sound. Is there any software out there that would accomplish this? I'm interested in seeing any sounds that would normally come out of th sound card. This is for Windows (XP), but I'd be interested in hearing solutions for other flavors, and OS X, as well.

    Read the article

  • flash.media.Sound.play takes long time to return

    - by Fire Lancer
    I'm trying to play some sounds in my flash project through action script. However for some reason in my code the call to Sound.play takes from 40ms to over 100ms in extreme cases, which is obviously more than enough to be very noticeable whenever a sound is played. This happens every time a sound is played, not just when that sound is first played, so I dont think its because the Sound object is still loading data or anything like that... At the start I have this to load the sound: class MyClass { [Embed(source='data/test_snd.mp3')] private var TestSound:Class; private var testSound:Sound;//flash.media.Sound public function MyClass() { testSound = new TestSound(); } Then im just using the play method of the sound object to play it later on. testSound.play();//seems to take a long time to return This as far as I can tell is following the same process as other Flash programs I found, however none of them seem to have this problem. Is there something that I've missed that would cause the play() method to be so slow?

    Read the article

  • Auto-select external soundcard?

    - by dandelion
    Just got an external usb sound card because my internal speakers broke. The new sound card works just fine after plugging it in and going to System Settings Sound, and then selecting the device. However, I was curious as to whether there was a way to make ubuntu auto-select the device without having to go through System Settings. Can it just be selected upon plugging it in? Any and all help appreciated :)) (ps its running 12.04)

    Read the article

  • No bass from the speakers

    - by Bhavesh Jogadia
    In Ubuntu 11.10 no bass sound at all when try to play mp3 or 2channels audio. I have 5.1/6 channels speakers. When I test speakers from the sound preference it works perfectly fine and then I try to play any MP3 there is no bass only the speakers work, I play 5.1 movies it plays fine bass sounds good. Also tried to to some changes as instructed with deamon.conf file but no go... When I turn my speakers on play speakers only mode it plays the bass but sound quality is not good compared to normal playing. I have a Creative 5.1 vx ca0160 sound card. In Windows also had the same problem unless I do bass redirection crossover frequency so is there any kinda software package or any kinda changes i can make in system file so that my speaker bass works fine or any thing who can let me change the bass redirection crossover frequency?

    Read the article

  • XFCE ~ Volume Hot Keys Not Working

    - by fleamour
    Just installed vanilla Xubuntu 12.04 LTS & updated on a ThinkPad E325 with Conexant CX20671 sound card. I notice volume hot keys work under Xubuntu DE but not XFCE. You can summon sound settings under Xubuntu but they are missing under XFCE. Also sound bar is greyed out though sound will still function. Muting/decreasing/increasing volume with hot keys has no effect. Is there a workaround? If not what package would I report a bug against?

    Read the article

  • mpd conflicting with other applications -- taking control of pulse?

    - by Jamie Schembri
    Simple explanation If mpd is playing and sound attempts to play through another application, x, sound from x will not be output. If sound from another application, x, is playing and mpd then attempts to play, no sound will be output from mpd whilst sound from x continues to play. Details I first noticed this problem with Flash, and this continues to be the most common scenario. I posted a question about this before realising it was not strictly Flash-related, but instead is something to do with mpd. My biggest frustration comes from trying to get mpd working again, as I can't seem to pin down any method. Sometimes pulseaudio -k seems to help, other times sudo /etc/init.d/mpd restart, others killing Chromium (due to Flash) with SIGTERM. Most of the time it's a combination of the above. I think this might be because I run mpd as another user and use pulseaudio. It is not run as root or current user. Also, mpd is compiled with pulse support. I have tried numerous things, however I honestly couldn't recite what, as it has been some time since. I'd rather not go poking around without some direction, but I'd be really happy to fix this problem once and for all. mpd.conf Simplified by removing comments/blank lines. music_directory "/var/lib/mpd/music" playlist_directory "/var/lib/mpd/playlists" db_file "/var/lib/mpd/tag_cache" log_file "/var/log/mpd/mpd.log" pid_file "/var/run/mpd/pid" state_file "/var/lib/mpd/state" user "mpd" bind_to_address "wilson" input { plugin "curl" } audio_output { type "pulse" name "My Pulse Output" } filesystem_charset "UTF-8" id3v1_encoding "UTF-8" Question For the sake of keeping this a question: does anyone know what is causing this, or how to fix it?

    Read the article

  • Get Creative soundcard working correctly

    - by schwiz
    I am trying to get sound going on my fresh install of 10.10. I have a creative fatlity branded sound card. My ALSA information. Most things seems to be working out of the box, once I turned off my onboard sound in my BIOS the soundcard kicked in. However, the system sounds aren't working (I love those drums and the road runner sound when you press backspace). Also, with a 7.1 setup my center channel and subwoofer don't work at all. All other channels are working like a champ. So I am trying to accomplish two things, get system sounds working and get center/sub channels working. How should I try to fix this?

    Read the article

  • Volume setting isn't remembered after restart/shutdown

    - by Iulian
    This is my first time here and I'm new to linux and also to Ubuntu. I've installed first version 11.10 and there was some problems with the unity dock and also the problem with the volume not being remembered after restart or shutdown. I'm using dualboot with Windows 7. Ubuntu was installed after windows. I have 2 sound cards. One is onboard, on the motherboard, and the other is external, an E-MU 0404 USB 2.0 sound card. The last one is my primary sound card and I've choosed it as default output sound card. I've upgraded to 12.04 hopeing that this was fiex but even in this version the OS doesn't keep the volume where it was last time. The big problem is that sometimes I forget about this problem and start music and it starts at full volume and soon I think I will die of heart attack. Is there a way to make it remember or at least to tell him to start at a specific volume not at 100%?

    Read the article

  • After upgrading to trusty, ALSA midi connection (aconnect) doesn't seem to work right

    - by SougonNaTakumi
    Previously in kubuntu 13.10 I was able to open vmpk or plug in a midi keyboard, and provided that TiMidity was running in server mode, I could run aconnect [keyboard port (129:0 for vmpk)] 14:0 aconnect 14:0 128:0 and I could play the keyboard and get sound. But now, a while after upgrading to trusty, I tried to do that, and didn't get any sound. TiMidity itself still plays files fine, but if I try to play them with aplaymidi, I still just get silence. Oddly, the midi files are clearly being read. When I ran (where 130:0 was vmpk's input port) aplaymidi -p 130:0 ~/path/to/midi.mid vmpk was highlighting notes on the piano as if it were playing the midi. One time I tried this, TiMidity (?) very briefly played a fraction of a second of the first chord of my song before everything went silent and vmpk just highlighted the first voice on the keyboard as usual. Now the weirdest part of this is that probably about 40% of the time, when I've played at least one note with either aplaymidi or vmpk, when I run aconnect -x I get a sudden burst of a note or chord from my speakers (that is, if I played one note, I get a note; if I played multiple sequential notes, they turn into a chord), as if the notes were being queued up but not being played and that somehow liberated them. I have no idea what's going on there. A little while ago I remember having a problem with Audacity playing wav files sped up and also locking up if I tried to pause it, which it stopped doing when I set the audio devices to the actual audio devices rather than pulse. But now when I checked again, it's doing the opposite: it won't play audio at all and/or acts weirdly if I don't set the audio devices to pulse, and either way will very occasionally randomly do the speeding up thing regardless. Oddly in the midst of what's looking like a pretty screwed up sound system, sound in VLC and Firefox has been working fine and if I play a wav file with aplay ~/path/to/sound.wav that works fine too. Any idea what I could do to figure out what's wrong with ALSA and/or fix it?

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >