Search Results

Search found 12107 results on 485 pages for 'session timeout'.

Page 20/485 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• Detach current session and attach to another session, done with one script, can I?

  - by Jimm Chen

  After reading the vague official doc of GNU screen( http://www.gnu.org/software/screen/manual/screen.html ) and asking quite some questions at this site. I still cannot figure out how to accomplish such a task with a shell script. This task costs some words to describe. Assume I'm using PuTTY to telnet into my Linux server. ?STEP 1? Launch 2 telnet connections . From putty window 1 (PTWIN1),telnet into Linux Bash shell, execute screen -RR to launch a screen session, and get session name 21385.pts-4.linux-ic37 . From putty window 2 (PTWIN2), do that same as in PTWIN1, but this time, I get session name 22041.pts-9.linux-ic37 . Now, we have two screen sessions running simultaneously. We can check this: $ screen -ls There are screens on: 22041.pts-9.linux-ic37 (Attached) 21385.pts-4.linux-ic37 (Attached) 2 Sockets in /var/run/uscreens/S-chj2. ?STEP 2? Assume that for some reason, PTWIN1's TCP connection is lost abnormally(but server doesn't know that), and an urgent work is pending on session 21385 and I want to quickly regain control of it. Fortunately, we know the 21385 session is still there, so, I want to have PTWIN2 attach to session 21385. Because I hate to remember the esoteric screen option all the time, so I decide to write a script called sttach. I hope that sttach 21385.pts-4.linux-ic37 can let me attach to session 21385(for PTWIN2). Now, let's say sttach works well and I take control of 21385 on PTWIN2. ?STEP 3? Some minutes later. I want to go back to work on session 22041. Here, please allow me to have PTWIN2 remain associated with session 21385. What I would like to do is to launch another putty window (PTWIN3), telnet into server, and execute sttach 22041.pts-9.linux-ic37 in hope that I can resume session 22041 on PTWIN3 . You can see the benefit of sttach: as long as I know the target session name, I can call it to have my PuTTY window switch to that session, regardless whether the target session is "(Attached)" or "(Detached)", and regardless whether the running context is inside a screen session or not. Now the question: How to write the (Bash) script sttach? I mean, run screen with appropriate options in sttach to accomplish the goal. Waiting for your kind answer. Thank you. My previous questions regarding GNU screen: GNU screen, how to get current sessionname programmatically Is it possible to change GNU screen session name after created? How do I know I'm running inside a linux "screen" or not? My env: openSUSE Linux 11.3, GNU screen 4.00.03 (FAU) 23-Oct-06

  Read the article

• Why Matlab in screen in Linux on PuTTY terminates itself after closing PuTTY session?

  - by Karl

  I connected to a linux server with PuTTY and start a screen session, and start matlab with: matlab -nodesktop Then, I run my matlab code as usual. The code will run for hours. So to test whether screen works, I start another PuTTY session and run top. Then, I close PuTTY session with still-running Matlab (top shows Matlab at 100% CPU usage) in screen. To my surprise, my Matlab process vanished after I close the aforementioned session. I've tried this a few times, and it seems the same thing happened. screen -ls shows that my screens are there but detached. top also shows that my matlab is not there. What might be the possible cause of this? Doesn't screen normally should keep on running even I terminate my PuTTY session?

  Read the article

• Why does gvim open session with extra/duplicate tabs?

  - by drapkin11

  I'm running gvim, have 2 files open in 2 tabs. I save the current session via the sessionman plugin by Yuri Klubakov. I close gvim (or keep gvim open but close the session, doesn't matter). When I reopen gvim and load the session, I have 3 tabs opened - two of the tabs have the same file! This is not just limited to this single session. When I open some of my other sessions, gvim opens about twice the number of tabs that I expect it to. I disabled this plugin and tried another (session by Peter Odding), but I still get the same problem. Any idea what might be going on behind the scenes?

  Read the article

• How do I fix: InvalidOperationException upon Session timeout in Ajax WebService call

  - by Ngm

  Hi All, We are invoking Asp.Net ajax web service from the client side. So the JavaScript functions have calls like: // The function to alter the server side state object and set the selected node for the case tree. function JSMethod(caseId, url) { Sample.XYZ.Method(param1, param2, OnMethodReturn); } function OnMethodReturn(result) { var sessionExpiry = CheckForSessionExpiry(result); var error = CheckForErrors(result); ... process result } And on the server side in the ".asmx.cs" file: namespace Sample [ScriptService] class XYZ : WebService { [WebMethod(EnableSession = true)] public string Method(string param1, string param2) { if (SessionExpired()) { return sessionExpiredMessage; } . . . } } The website is setup to use form based authentication. Now if the session has expired and then the JavaScript function "JSMethod" is invoked, then the following error is obtained: Microsoft JScript runtime error: Sys.Net.WebServiceFailedException: The server method 'Method' failed with the following error: System.InvalidOperationException-- Authentication failed. This exception is raised by method "function Sys$Net$WebServiceProxy$invoke" in file "ScriptResource.axd": function Sys$Net$WebServiceProxy$invoke { . . . { // In debug mode, if no error was registered, display some trace information var error; if (result && errorObj) { // If we got a result, we're likely dealing with an error in the method itself error = result.get_exceptionType() + "-- " + result.get_message(); } else { // Otherwise, it's probably a 'top-level' error, in which case we dump the // whole response in the trace error = response.get_responseData(); } // DevDiv 89485: throw, not alert() throw Sys.Net.WebServiceProxy._createFailedError(methodName, String.format(Sys.Res.webServiceFailed, methodName, error)); } So the problem is that the exception is raised even before "Method" is invoked, the exception occurs during the creation of the Web Proxy. Any ideas on how to resolve this problem

  Read the article

• Configuration setting of HttpWebRequest.Timeout value

  - by Michael Freidgeim

  I wanted to set in configuration on client HttpWebRequest.Timeout.I was surprised, that MS doesn’t provide it as a part of .Net configuration.(Answer in http://forums.silverlight.net/post/77818.aspx thread: “Unfortunately specifying the timeout is not supported in current version. We may support it in the future release.”) I added it to appSettings section of app.config and read it in the method of My HttpWebRequestHelper class  //The Method property can be set to any of the HTTP 1.1 protocol verbs: GET, HEAD, POST, PUT, DELETE, TRACE, or OPTIONS.        public static HttpWebRequest PrepareWebRequest(string sUrl, string Method, CookieContainer cntnrCookies)        {            HttpWebRequest webRequest = WebRequest.Create(sUrl) as HttpWebRequest;            webRequest.Method = Method;            webRequest.ContentType = "application/x-www-form-urlencoded";            webRequest.CookieContainer = cntnrCookies; webRequest.Timeout = ConfigurationExtensions.GetAppSetting("HttpWebRequest.Timeout", 100000);//default 100sec-http://blogs.msdn.com/b/buckh/archive/2005/02/01/365127.aspx)            /*                //try to change - from http://www.codeproject.com/csharp/ClientTicket_MSNP9.asp                                  webRequest.AllowAutoRedirect = false;                       webRequest.Pipelined = false;                        webRequest.KeepAlive = false;                        webRequest.ProtocolVersion = new Version(1,0);//protocol 1.0 works better that 1.1 ??            */            //MNF 26/5/2005 Some web servers expect UserAgent to be specified            //so let's say it's IE6            webRequest.UserAgent = "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322)";            DebugOutputHelper.PrintHttpWebRequest(webRequest, TraceOutputHelper.LineWithTrace(""));            return webRequest;        }Related link:http://stackoverflow.com/questions/387247/i-need-help-setting-net-httpwebrequest-timeoutv

  Read the article

• Xfce gets really confused about session saving, etc

  - by Pointy

  I'm getting a new laptop running with 11.04 Ubuntu. I've got the xfce4 packages all installed, which is something I've had no problems with on any of my other machines. On this new laptop, however, though I can log in and use an xfce session without any problems, logging out of a session is problematic: I click the "Log out" widget from the panel and then "Log out" from its option dialog. Then the thing just sits there, not logging out. Subsequent attempts to open the "Log out" widget fail with an error about the session manager being busy. After maybe a minute or so, it logs out. Though I've got the "Save session" option checked in the log out dialog, xfce just makes a complete hash of the business. It does remember the applications that I had running, but it seems to forget about the window manager (!!) and the workspace configuration. I don't log in/out that often, and generally I don't care much about restarting applications, but the window manager being missing is of course pretty annoying. I like xfce because it's simple and unobtrusive and usually works pretty well. I've never experienced this, and I've got two other machines also running 11.04 with pretty much the same setup (straight Ubuntu install with xfce4 packages added). Is there some good way to diagnose stuff like that? edit — well I nuked my session cache, did an explicit save from the session widget, and now it works. Well, it doesn't save the workspace location for each client and instead opens them all up on the first workspace, but I think that may be because, in the session, xfwm4 is the last thing in the "Client" list, so before it's started all the other clients just pile up in the first (and only) workspace. I'm still curious about how exactly it gets so messed up. I certainly wasn't knowingly attempting anything fancy or unorthodox, though I may have done something fishy inadvertently.

  Read the article

• WLS Console Timeout

  - by john.graves(at)oracle.com

  The WebLogic console timeout is a great feature for security, yet a horrible feature during development.  Logging in over and over again gets to be annoying.  This is very easy to change, but I would never do this on a production system!   Find the WebLogic consoleapp weblogic.xml file.  This is typically in your WL_HOME/server/lib/consoleapp/webapp/WEB-INF/ directory. Edit the weblogic.xml file: Update the section shown and increase the timeout-secs.  I just throw an extra zero at the end giving me ten full hours of fun!!!: <session-descriptor> <timeout-secs>36000</timeout-secs> <invalidation-interval-secs>60</invalidation-interval-secs> <cookie-name>ADMINCONSOLESESSION</cookie-name> <cookie-max-age-secs>-1</cookie-max-age-secs> <cookie-http-only>false</cookie-http-only> <url-rewriting-enabled>false</url-rewriting-enabled> </session-descriptor> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }

  Read the article

• Relation between HTTP Keep Alive duration and TCP timeout duration

  - by Suresh Kumar

  I am trying to understand the relation between TCP/IP and HTTP timeout values. Are these two timeout values different or same? Most Web servers allow users to set the HTTP Keep Alive timeout value through some configuration. How is this value used by the Web servers? is this value just set on the underlying TCP/IP socket i.e is the HTTP Keep Alive timeout and TCP/IP Keep Alive Timeout same? or are they treated differently? My understanding is (maybe incorrect): The Web server uses the default timeout on the underlying TCP socket (i.e. indefinite) regardless of the configured HTTP Keep Alive timeout and creates a Worker thread that counts down the specified HTTP timeout interval. When the Worker thread hits zero, it closes the connection. EDIT: My question is about the relation or difference between the two timeout durations i.e. what will happen when HTTP keep-alive timeout duration and the timeout on the Socket (SO_TIMEOUT) which the Web server uses is different? should I even worry about these two being same or not?

  Read the article

• ASP.NET MVC: ensure user always has a session variable set

  - by pcampbell

  Consider an ASP.NET MVC application that requires a session variable be set. It's used throughout the app. It'll be set by either reading a hashed value on the browser cookie, or after having the user login. In the WebForms + Master Page model, I'd check the Page_Load() of the master page. Perhaps not the ultimate event, but it was an easy one to find. How would you check and enforce the existance of a session variable in ASP.NET MVC? Consider that this question might not involve user login details, but some other piece of data (first visit time, perhaps).

  Read the article

• Detect Client Computer name when an RDP session is open

  - by Ubiquitous Che

  Hey all, My manager has pointed out to me a few nifty things that one of our accounting applications can do because it can load different settings based on the machine name of the host and the machine name of the client when the package is opened in an RDP session. We want to provide similar functionality in one of my company's applications. I've found out on this site how to detect if I'm in an RDP session, but I'm having trouble finding information anywhere on how to detect the name of the client computer. Any pointers in the right direction would be great. I'm coding in C# for .NET 3.5 EDIT The sample code I cobbled together from the advice below - it should be enough for anyone who has a use for the WTSQuerySessionInformation to get a feel for what's going on. Note that this isn't necessarily the best way of doing it - just a starting point that I've found useful. When I run this locally, I get boring, expected answers. When I run it on our local office server in an RDP session, I see my own computer name in the WTSClientName property. using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Runtime.InteropServices; namespace TerminalServicesTest { class Program { const int WTS_CURRENT_SESSION = -1; static readonly IntPtr WTS_CURRENT_SERVER_HANDLE = IntPtr.Zero; static void Main(string[] args) { StringBuilder sb = new StringBuilder(); uint byteCount; foreach (WTS_INFO_CLASS item in Enum.GetValues(typeof(WTS_INFO_CLASS))) { Program.WTSQuerySessionInformation( WTS_CURRENT_SERVER_HANDLE, WTS_CURRENT_SESSION, item, out sb, out byteCount); Console.WriteLine("{0}({1}): {2}", item.ToString(), byteCount, sb); } Console.WriteLine(); Console.WriteLine("Press any key to exit..."); Console.ReadKey(); } [DllImport("Wtsapi32.dll")] public static extern bool WTSQuerySessionInformation( IntPtr hServer, int sessionId, WTS_INFO_CLASS wtsInfoClass, out StringBuilder ppBuffer, out uint pBytesReturned); } enum WTS_INFO_CLASS { WTSInitialProgram = 0, WTSApplicationName = 1, WTSWorkingDirectory = 2, WTSOEMId = 3, WTSSessionId = 4, WTSUserName = 5, WTSWinStationName = 6, WTSDomainName = 7, WTSConnectState = 8, WTSClientBuildNumber = 9, WTSClientName = 10, WTSClientDirectory = 11, WTSClientProductId = 12, WTSClientHardwareId = 13, WTSClientAddress = 14, WTSClientDisplay = 15, WTSClientProtocolType = 16, WTSIdleTime = 17, WTSLogonTime = 18, WTSIncomingBytes = 19, WTSOutgoingBytes = 20, WTSIncomingFrames = 21, WTSOutgoingFrames = 22, WTSClientInfo = 23, WTSSessionInfo = 24, WTSSessionInfoEx = 25, WTSConfigInfo = 26, WTSValidationInfo = 27, WTSSessionAddressV4 = 28, WTSIsRemoteSession = 29 } }

  Read the article

• Sharing ASP.NET State databases between multiple apps

  - by MikeWyatt

  Is it better for a collection of ASP.NET web apps to share the same session database, or should each one have its own? If there is no significant difference, having a single database would be preferable due to easier maintenance. Background My team has an assortment of ASP.NET web apps, all written in either Monorail 1.1 or ASP.NET MVC 1.0. Each app currently uses a dedicated session state database. I'm working on adding a new site to that list, and am debating whether I should create another new session database, or just share an existing one with another app.

  Read the article

• Java - Google App Engine - InvalidClassException when I change a class that was stored in session sc

  - by Spines

  I updated my User class, and now whenever someone that had the old version of the User class stored in their session scope accesses my site, I get an InvalidClassException. javax.servlet.ServletException: java.lang.RuntimeException: java.io.InvalidClassException: User; local class incompatible: stream classdesc serialVersionUID = 4949038118012519093, local class serialVersionUID = -971500502189813151 How do I stop this error from happening for those users? I could probably invalidate everyone's sessions every time I want to update a class that gets stored in session scope, but is there a better way, so that my user's don't have to login again?

  Read the article

• How Easy Is It to Hijack Session Vars on GoDaddy (PHP)

  - by yar

  This article states that If your site is run on a shared Web server, be aware that any session variables can easily be viewed by any other users on the same server. On a larger host like GoDaddy, are there really no protections in place against this? Could it really be that easy? If it is that easy, where are the session vars of the other users on my host so I can check them out? Edit: I didn't believe it, but here's my little program which shows that this is true! I wonder if those are really the same as the value stored in the cookies on the users' machine?

  Read the article

• Recursive FTP directory listing in shell/bash with a single session (using cURL or ftp)

  - by Timo

  I am writing a little shellscript that needs to go through all folders and files on an ftp server (recursively). So far everything works fine using cURL - but it's pretty slow, becuase cURL starts a new session for every command. So for 500 directories, cURL preforms 500 logins. Does anybody know, whether I can stay logged in using cURL (this would be my favourite solution) or how I can use ftp with only one session in a shell script? I know how to execute a set of ftp commands and retrieve the response, but for the recursive listing, it has to be a little more dynamic... Thanks for your help!

  Read the article

• Having an issue with org.hibernate.SessionException: Session is closed! in Hibernate

  - by hal10001

  I've done quite a bit a research on this with no luck, but all the answers have a tendency to point toward the session context settings in the config file. What is odd is that I get a session connection the very first time I hit the page (and therefore, a successful result set), but then when I reload I get the following exception: org.hibernate.SessionException: Session is closed! Here are my config settings that are not DB connection string related: <property name="hibernate.show_sql">false</property> <property name="hibernate.dialect">org.hibernate.dialect.SQLServerDialect</property> <property name="hibernate.current_session_context_class">thread</property> <property name="hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</property> <property name="hibernate.cache.use_query_cache">false</property> <property name="hibernate.cache.use_minimal_puts">false</property> Here is an example of a call I make that produces the situation I described above. public T get(int id) { session.beginTransaction(); T type; try { type = getTypeClass().cast(session.get(getTypeClass(), id)); } catch (ClassCastException classCastException) { throw new ClassCastException(classCastException.getMessage()); } session.getTransaction().commit(); return type; } The session variable reference is to a static field that contains the current session. All of the session connection details are textbook reference manual. For example, here is my Hibernate session utility: import org.hibernate.SessionFactory; import org.hibernate.cfg.Configuration; public class HibernateSessionFactoryUtil { private static final SessionFactory sessionFactory = buildSessionFactory(); private static SessionFactory buildSessionFactory() { try { return new Configuration().configure().buildSessionFactory(); } catch (Throwable ex) { System.err.println("Initial SessionFactory creation failed." + ex); throw new ExceptionInInitializerError(ex); } } public static SessionFactory getSessionFactory() { return sessionFactory; } }

  Read the article

• IE won't start session from an iframe?..

  - by jayarjo

  The task was to bypass login form on remote server with a session_id acquired through a call to server's web API. So that user wouldn't have to login twice. Since there's no way to set cookies for different domain. What we came up to was - put a little file on remote server, to which we pass encrypted session_id from hidden iframe and which is supposed to start a proper session for a remote app, which is then loaded in another iframe. This approach works fine in FF/Chrome, but not IE... However if I copy url to self-made remote authorization script from iframe's src attribute to to IE's address bar and load it from there, session get's created as expected. But for some reason it just doesn't want to do the same from an iframe. Does anyone have any clue, why this is happening?

  Read the article

• Invalidating session before iPhone application quits

  - by tartox

  Hello I would like to tell the server to invalidate an ongoing session when the user quits the iPhone application. In the app delegate, I send a request to the server in the (void)applicationWillTerminate:(UIApplication *)application method. I am not waiting for a server answer, I just want to send the request and quit. However I cant see any packet leaving the application. The same code in another place works fine. Session has a limited duration anyway and the server will invalidate it after a while, but I would prefer to do it nicely when leaving application. Is it normal that no NSURLConnection can be established from the applicationWillTerminate method ? Thank you.

  Read the article

• Is it safe to access asp.net session variables through static properties of a static object?

  - by Ronnie Overby

  Is it safe to access asp.net session variables through static properties of a static object? Here is what I mean: public static class SessionHelper { public static int Age { get { return (int)HttpContext.Current.Session["Age"]; } set { HttpContext.Current.Session["Age"] = value; } } public static string Name { get { return (string)HttpContext.Current.Session["Name"]; } set { HttpContext.Current.Session["Name"] = value; } } } Is it possible that userA could access userB's session data this way?

  Read the article

• PHP session destroyed / lost after header

  - by ILMV

  I've got a script that sets some session values before redirecting to / using header(). I've read many posts about the $_SESSION variable being destroyed / lost after header(), even after I implemented this: // set session here session_regenerate_id(true); session_write_close(); header("Location: /"); session_start() is set in the correct places, does anyone know of anything that I might be missing? On the index.php page I have this: session_start(); print_r($_SESSION); // outputs nothing :'( The code is pretty complex so will not post it all, just snippets.

  Read the article

• Combining Session and Cache

  - by Zyphrax

  To make my extranet web application even faster/more scalable I think of using some of the caching mechanisms. For some of the pages we'll use HTML caching, please ignore that technique for this question. E.g.: at some point in time 2500 managers will simultaneously login on our application (most of them with the same Account/Project) I think of storing an Account-cachekey and Project-cachekey into the user's Session and use that to get the item from the Cache. I could have simply stored the Account into the session, but that would result in 2500 of the same Accounts in memory. Is there a better solution to this or does it make sense :)?

  Read the article

• Using ASP.NET Session for Lifetime Management (Unity)

  - by Sigray

  I am considering using Unity to manage the lifetime of a custom user class instance. I am planning on extending the LifetimeManager with a custom ASP.NET session manager. What I want to be able to do is store and retrieve the currently logged in user object from my custom classes, and have Unity get the instance of User from the session object in ASP.NET, or (when in a Win32 project) retrieve it statically or from the current thread. So far my best solution is to create a static instance of my Unity container on startup, and use the Resolve method to get my User object from each of my classes. However, this seems to create a dependency on the unity container in my other classes. What is the more "Unity" way of accomplishing this goal? I would like to be able to read/replace the current User instance from any class.

  Read the article

• Hibernate session method to update object

  - by EugeneP

  I need this roadmap of a Hibernate managed object instance. First, I create an instance with initial properties and persist this object in a db. Then session associated with this object is closed. But still, I serialize my object and on the next step deserialize it, invoke some setters, and again, I need to update what changed in a database. What methods of Hibernate session should I use? persist() or save() on the first step and saveOrUpdate() on the second? In fact I see that saveOrUpdate() can be used on each step. What would you recommend?

  Read the article

• Using Session Variables inside an ajax document

  - by Pete Herbert Penito

  Hi, For some reason I've having problems reading this session variable within an ajax document, I've got this inside online.php: ` session_start(); if (isset($_SESSION['username'])) { $username = $_SESSION['username']; } ` For some Reason this is not setting username even when the session var is being used on the host page, i call on the php file every second using this ` $(document).ready(function() { var refreshId = setInterval(function() { $('#timeval').load('online.php'); }, 1000); $("#stop").click(function() { clearInterval(refreshId); }); }); ` Am I doing something wrong, or is this not even possible?? Any advice would really help thanks alot!

  Read the article

• rails session questions?

  - by fsfsd

  i run my rails program in linux , then i shutdown , after i run it agian, server report session are expired,

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >