Search Results

Search found 17487 results on 700 pages for 'static members'.

Page 20/700 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Static IP configuration causing apt-get errors

    - by JPbuntu
    I am getting errors when running apt-get update or when installing new packages. Although this only happens when the server configured for a static IP address. Changing the configuration back to DHCP and restarting networking fixes the problem, although I want a static IP. Once it is working I can change back to my static IP address and restart networking. Although this only works until I restart the server (restarting the router is ok), and then I start getting the same errors and have to switch back to DHCP. Any ideas on what could be causing this or tips on troubleshooting it? Thanks in advance. here is my static IP configuration: auto eth0 iface eth0 inet static address 192.168.2.2 netmask 255.255.255.0 gateway 192.168.2.1 The apt-get update errors go something like this: A few of these Ign http://us.archive.ubuntu.com precise-backports InRelease then a lot of these Err http://security.ubuntu.com precise-security Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname) and a lot of these W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backports/universe/i18n/Translation-en Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname)

    Read the article

  • Setup static Ip in virtual box

    - by Haris
    I have as issue i am Ubuntu desktop and i have installed virtual-box(4.1) ISSUE:- Ubuntu 11.10 desktop is my host operating system and on Virtual-box i installed Ubuntu server selecting bridge adapter as my first adapter by default my network interfaces file get ip address by dhcp server but i want to setup an static ip. by changing network interface file to static and gave some static ips my internet stop working on guest operating system(virtual-box - Ubuntu server). Can any one help me how can i setup static on virtual-box so that my internet will work too on my guest operating system. thanks in advance.

    Read the article

  • How to minimize the usage of static variables and objects

    - by Peter Penzov
    I'm trying to implement this JavaFX code where I want to call remote Java class and pass boolean flag: final CheckMenuItem toolbarSubMenuNavigation = new CheckMenuItem("Navigation"); toolbarSubMenuNavigation.setOnAction(new EventHandler<ActionEvent>() { @Override public void handle(ActionEvent e) { //DataTabs.renderTab = toolbarSubMenuNavigation.isSelected(); DataTabs.setRenderTab(toolbarSubMenuNavigation.isSelected()); // call here the getter setter and send boolean flag System.out.println("subsystem1 #1 Enabled!"); } }); Java class which I want to call: public class DataTabs { private static boolean renderTab; // make members *private* private static TabPane tabPane; public static boolean isRenderTab() { return DataTabs.renderTab; } public static void setRenderTab(boolean renderTab) { DataTabs.renderTab = renderTab; tabPane.setVisible(renderTab); } // somewhere below // set visible the tab pane TabPane tabPane = DataTabs.tabPane = new TabPane(); tabPane.setVisible(renderTab); } This implementation works but I want to optimize it to use less static variables and objects. Can you tell me which sections of the code how can be optimized?

    Read the article

  • Methods for getting static data from obj-c to Parse (database)

    - by Phil
    I'm starting out thinking out how best to code my latest game on iOS, and I want to use parse.com to store pretty much everything, so I can easily change things. What I'm not sure about is how to get static data into parse, or at least the best method. I've read about using NSMutableDictionary, pLists, JSON, XML files etc. Let's say for example in AS3 I could create a simple data object like so... static var playerData:Object = {position:{startX:200, startY:200}}; Stick it in a static class, and bingo I've got my static data to use how I see fit. Basically I'm looking for the best method to do the same thing in Obj-c, but the data is not to be stored directly in the iOS game, but to be sent to parse.com to be stored on their database there. The game (at least the distribution version) will only load data from the parse database, so however I'm getting the static data into parse I want to be able to remove it from being included in the eventual iOS file. So any ideas on the best methods to sort that? If I had longer on this project, it might be nice to use storyboards and create a simple game editor to send data to parse....actually maybe that's a good idea, it's just I'm new to obj-c and I'm looking for the most straightforward (see quickest) way to achieve things. Thanks for any advice.

    Read the article

  • How do I add a static library target that compiles before an application compiles in Xcode?

    - by Koning Baard XIV
    I'm creating a static library in C++. The static library itself links to nothing. To test the static library, I'm creating a test program in C++ (you know, with a main function). Now, I want that whenever I click Build in Xcode, it compiles the static library first, then compiles the test program and link that test program to the static library, like this: # The steps indicate the order Xcode should compile it # (Step 1) Static Library <----------. | (Step 2) Test Program -------> Standard Library Also, the test program should use the header files of the static library. Can anyone explain me how to configure this in Xcode? Thanks

    Read the article

  • How to Alphabetically retrieve members of a list?

    - by Neoryder
    I have an organization class class Organization { hasMany = [member:Members] } class Members { belongsTo = organization } I'm printing all the members using <ol> <g:each in="${organizationInstance?.members?}" var="m"> <li><g:link controller="members" action="show" id="${m.id}">${m?.encodeAsHTML()}</g:link></li> </g:each> </ol> I want to sort the printing of members so that it would print alphabetically. any ideas?

    Read the article

  • What is the String 'volumeName' argument of MediaStore.Audio.Playlists.Members.getContentUri referri

    - by Brett
    I am wanting to query the members of a given playlist. I have the correct playlist id, and want to use a managedQuery() to look at the playlist members in question. What I have is this: private String [] columns = { MediaStore.Audio.Playlists.Members.PLAYLIST_ID, MediaStore.Audio.Playlists.Members.TITLE, }; Uri membersUri = MediaStore.Audio.Playlists.Members.getContentUri(volume, playlistId); Cursor tCursor = managedQuery(membersUri, columns, null, null, null); I don't know what the volume argument needs to be. I've tried this: MediaStore.Audio.Playlists.EXTERNAL_CONTENT_URI.toString() for the "volume" argument. That gives me back a valid content URI that looks like: content://media/external/audio/playlists/2/members However, my cursor comes back null. I probably am way off base -- I know what I want to do is very simple.

    Read the article

  • Class decorator to declare static member (e.g., for log4net)?

    - by Ken
    I'm using log4net, and we have a lot of this in our code: public class Foo { private static readonly ILog log = LogManager.GetLogger(typeof(Foo)); .... } One downside is that it means we're pasting this 10-word section all over, and every now and then somebody forgets to change the class name. The log4net FAQ also mentions this alternative possibility, which is even more verbose: public class Foo { private static readonly ILog log = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType); ... } Is it possible to write a decorator to define this? I'd really like to say simply: [LogMe] // or perhaps: [LogMe("log")] public class Foo { ... } I've done similar things in other languages, but never a statically-compiled language like C#. Can I define class members from a decorator?

    Read the article

  • Apache Mod_rewrite rule working on one server, but not another

    - by Mason
    I am using mod_jk and mod_rewrite on httpd 2.2.15. I have a rule.... RewriteCond %{REQUEST_URI} !^/video/play\.xhtml.* RewriteRule ^/video/(.*) /video/play.xhtml?vid=$1 [PT] I just want to rewrite something like /video/videoidhere to /video/play.xhtml?vid=videoidhere This works perfectly on my developer machine, but on production I get a 404 (generated by Jboss, not Apache). here is the tail of access.log and rewrite.log on prod (broken). the rewrite.log is exactly the same on dev(working) applying pattern '^/video/(.*)' to uri '/video/46279d4daf5440b2844ec831413dcc3b' RewriteCond: input='/video/46279d4daf5440b2844ec831413dcc3b' pattern='!^/video/play\.xhtml.*' => matched rewrite '/video/46279d4daf5440b2844ec831413dcc3b' -> '/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b' split uri=/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b -> uri=/video/play.xhtml, args=vid=46279d4daf5440b2844ec831413dcc3b forcing '/video/play.xhtml' to get passed through to next API URI-to-filename handler "GET /video/46279d4daf5440b2844ec831413dcc3b HTTP/1.1" 404 420 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.6) Gecko/20100628 Ubuntu/10.04 (lucid) Firefox/3.6.6" I can access http://www.fivi.com/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b but not /video/46279d4daf5440b2844ec831413dcc3b Both server are even using the EXACT same httpd.conf, and modules. I built Apache with... ./configure --prefix /usr/local/apache2.2.15 --enable-alias --enable-rewrite --enable-cache --enable-disk_cache --enable-mem_cache --enable-ssl --enable-deflate Thanks, Mason ----UPDATE---- -mod-jk.conf JkWorkersFile /usr/local/apache2.2.15/conf/workers.properties JkLogFile /var/log/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T" JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> -workers.properties worker.node1.port=8009 worker.node1.host=75.102.10.74 worker.node1.type=ajp13 worker.node1.lbfactor=20 worker.node1.ping_mode=A #As of mod_jk 1.2.27 worker.node2.port=8009 worker.node2.host=75.102.10.75 worker.node2.type=ajp13 worker.node2.lbfactor=10 worker.node2.ping_mode=A #As of mod_jk 1.2.27 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=node2,node1 worker.loadbalancer.sticky_session=True worker.status.type=status -httpd.conf ServerName www.fivi.com:80 Include /usr/local/apache2.2.15/conf/mod-jk.conf NameVirtualHost * <VirtualHost *> ServerName * DocumentRoot /usr/local/apache2/htdocs JkUnMount /* loadbalancer RedirectMatch 301 /(.*) http://www.fivi.com/$1 </VirtualHost> <VirtualHost *> ServerName www.fivi.com ServerAlias www.fivi.com images.fivi.com JkMount /* loadbalancer JkMount / loadbalancer [root@fivi conf]# /usr/local/apache2.2.15/bin/httpd -M Loaded Modules: core_module (static) authn_file_module (static) authn_default_module (static) authz_host_module (static) authz_groupfile_module (static) authz_user_module (static) authz_default_module (static) auth_basic_module (static) cache_module (static) disk_cache_module (static) mem_cache_module (static) include_module (static) filter_module (static) deflate_module (static) log_config_module (static) env_module (static) headers_module (static) setenvif_module (static) version_module (static) ssl_module (static) mpm_prefork_module (static) http_module (static) mime_module (static) status_module (static) autoindex_module (static) asis_module (static) cgi_module (static) negotiation_module (static) dir_module (static) actions_module (static) userdir_module (static) alias_module (static) rewrite_module (static) so_module (static) jk_module (shared) Syntax OK

    Read the article

  • PHP 5.3: Late static binding doesn't work for properties when defined in parent class while missing in child class

    - by DavidPesta
    Take a look at this example, and notice the outputs indicated. <?php class Mommy { protected static $_data = "Mommy Data"; public static function init( $data ) { static::$_data = $data; } public static function showData() { echo static::$_data . "<br>"; } } class Brother extends Mommy { } class Sister extends Mommy { } Brother::init( "Brother Data" ); Sister::init( "Sister Data" ); Brother::showData(); // Outputs: Sister Data Sister::showData(); // Outputs: Sister Data ?> My understanding was that using the static keyword would refer to the child class, but apparently it magically applies to the parent class whenever it is missing from the child class. (This is kind of a dangerous behavior for PHP, more on that explained below.) I have the following two things in mind for why I want to do this: I don't want the redundancy of defining all of the properties in all of the child classes. I want properties to be defined as defaults in the parent class and I want the child class definition to be able to override these properties wherever needed. The child class needs to exclude properties whenever the defaults are intended, which is why I don't define the properties in the child classes in the above example. However, if we are wanting to override a property at runtime (via the init method), it will override it for the parent class! From that point forward, child classes initialized earlier (as in the case of Brother) unexpectedly change on you. Apparently this is a result of child classes not having their own copy of the static property whenever it isn't explicitly defined inside of the child class--but instead of throwing an error it switches behavior of static to access the parent. Therefore, is there some way that the parent class could dynamically create a property that belongs to the child class without it appearing inside of the child class definition? That way the child class could have its own copy of the static property and the static keyword can refer to it properly, and it can be written to take into account parent property defaults. Or is there some other solution, good, bad, or ugly?

    Read the article

  • How do I combine static and dynamic DHCP leases on a Cisco router?

    - by Brad
    Basically, what I need is super similar to the unanswered cisco forum question below: https://supportforums.cisco.com/message/3139749#3139749 I have a Cisco 850 Series router. I have configured a DHCP pool for the 10.0.0.0/24 network. I have excluded 10.0.0.1 - 10.0.0.99 from the DHCP pool. I want to add a static DHCP pool for stuff and I want DHCP to statically assign them the addresses of my choice below 100. Actually, I don't care what addresses I statically assign. They can be anything in the pool for all I care, I just want it to work. Why are you doing this? Just statically assign the IPs on the devices! I don't want to do this because I have some laptop users. They could obviously only use that static IP here. This isn't a problem if they could be bothered to change any location setting or something. They can't. So it HAS to be DHCP. It also has to be static IPs because I need to forward ports to them. I know, I know, this is weird but it's an apartment LAN/WLAN so this isn't exactly a typical use case. Relevant sections of config below: ip dhcp excluded-address 10.0.0.1 10.0.0.99 ! ip dhcp pool Internal-net import all network 10.0.0.0 255.255.255.0 default-router 10.0.0.1 domain-name 1770.local lease 7 ! ip dhcp pool static-pool import all origin file flash://staticmap default-router 10.0.0.1 domain-name 1770.local Contents of staticmap: *time* Aug 5 2010 09:00 AM *version* 2 !IP address Type Hardware address Lease expiration 10.0.0.100/24 1 001f.5b3e.d50a Infinite *end* You can see here I was trying addresses outside the excluded-address range to see if that would make any difference. My testing machine's MAC: mainframe:~ brad$ ifconfig en1 en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:5b:3e:d5:0a What shows up in the DHCP binding table: basestar#show ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.0.0.112 0100.1f5b.3ed5.0a Aug 12 2010 10:06 AM Automatic What's up with the funny looking MAC in the DHCP binding table?? Is what I'm trying to accomplish basically impossible? Am I going about this the wrong way? All I want to to be able to port forward some ports to specific devices. The way I would do this with a consumer router is to do what I'm trying to do here; assign static DHCP to those devices then configure PAT for ports on those addresses.

    Read the article

  • How to route public static IP to a virtual machine on a vmware ESXi host?

    - by Kevin Southworth
    I have 5 static IPs from my ISP (Comcast) and I have a physical machine with VMware ESXi 4.0 on it that is hosting multiple virtual machines. Right now I am just using the default vmware virtual network (vswitch0) with DHCP from the Comcast IP Gateway Router and everything is working fine. Each virtual machine can access the internet, etc. One of my virtual machines is a webserver (Windows Server 2008) and I want to assign it to 1 of my 5 static IPs so it's accessible from the public internet, while leaving the other VMs on the internal LAN still using DHCP. If I just plug my laptop directly into the Comcast IP Gateway (it has 4 ports on the back) and assign my laptop a Static IP using the windows networking dialogs, then I can hit my laptop from the public internet and it works great. However, if I try to do the same steps to set a static IP config on my Windows Server 2008 VM, it does not work. The VM cannot access the internet (open Firefox and try to visit google.com), and I cannnot see the VM from the public internet either. I'm assuming I'm missing something in the ESXi config somewhere, but I'm pretty new to ESXi and I'm not sure how to configure it to work this way.

    Read the article

  • static block instance block java Order

    - by Rollerball
    Having read this question In what order are the different parts of a class initialized when a class is loaded in the JVM? and the related JLS. I would like to know in more detail why for example having class Animal (superclass) and class Dog (subclass) as following: class Animal { static{ System.out.println("This is Animal's static block speaking"): } { System.out.println("This is Animal's instance block speaking"); } class Dog{ static{ System.out.println("This is Dog's static block speaking"); } { System.out.println("This is Dog's instance block speaking"); } public static void main (String [] args) { Dog dog = new Dog(); } } Ok before instantiating a class its direct superclass needs to be initialized (therefore all the statics variables and block need to be executed). So basically the question is: Why after initializing the static variables and static blocks of the super class, control goes down to the subclass for static variables initialization rather then finishing off the initialization of also the instance member? The control goes like: superclass (Animal): static variables and static blocks subclass (Dog): static variables and static blocks superclass (Animal): instance variables and instance blocks sublcass (Dog):instance variables and instance blocks What is the reason why it is in this way rather than : superclass -> static members superclass -> instance members subclass -> static members sublcass-> instance members

    Read the article

  • What is a good use case for static import of methods?

    - by Miserable Variable
    Just got a review comment that my static import of the method was not a good idea. The static import was of a method from a DA class, which has mostly static methods. So in middle of the business logic I had a da activity that apparently seemed to belong to the current class: import static some.package.DA.*; class BusinessObject { void someMethod() { .... save(this); } } The reviewer was not keen that I change the code and I didn't but I do kind of agree with him. One reason given for not static-importing was it was confusing where the method was defined, it wasn't in the current class and not in any superclass so it too some time to identify its definition (the web based review system does not have clickable links like IDE :-) I don't really think this matters, static-imports are still quite new and soon we will all get used to locating them. But the other reason, the one I agree with, is that an unqualified method call seems to belong to current object and should not jump contexts. But if it really did belong, it would make sense to extend that super class. So, when does it make sense to static import methods? When have you done it? Did/do you like the way the unqualified calls look? EDIT: The popular opinion seems to be that static-import methods if nobody is going to confuse them as methods of the current class. For example methods from java.lang.Math and java.awt.Color. But if abs and getAlpha are not ambiguous I don't see why readEmployee is. As in lot of programming choices, I think this too is a personal preference thing. Thanks for your response guys, I am closing the question.

    Read the article

  • Why is my eth0 getting a dynamic ip when it is configured to be static?

    - by sdek
    For some reason our office linux box is being assigned an ip address via dhcp and I don't know why. What is confusing to me is that when I check system-config-network it shows that my eth0 is setup to be a static ip address. And /etc/sysconfig/network-scripts/ifcfg-eth0 also shows it is setup to be a static ip, yet it is getting a different ip address than the one specified in the ifcfg-eth0. Let me know if you have any suggestions on or ideas on where I can look next. Here are a few details that might help you figure out what an idiot I am :) Fedora 11 Router in front of this box is running dhcp, starting at 10.42.1.100 This box is configured to be 10.42.1.50 (at least I think it is!), subnet 255.255.255.0 (which is same as the router's lan subnet) Instead of having the static IP, this box is getting assigned 10.42.1.100. Here are the ifcfg-eth0 details DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no NM_CONTROLLED=no NETMASK=255.255.255.0 IPADDR=10.42.1.50 GATEWAY=10.42.1.1

    Read the article

  • How do i mitigate DDOS attacks on static servers?

    - by acidzombie24
    Here is a slightly different take on DDOS attacks. Rather than a server with dynamic content being attack i was curious how to deal with attacks on servers with STATIC CONTENT. This means cpu tends to not be an issue. Its either bandwidth or connection problems. How would i mitigate a DDOS attack knowing nothing about the attacker (for example country, ip address or anything else). I was wondering is shorting the timeout and increasing amount of connections is an acceptable solution? Or maybe that is completely useless? Also i would limit the amount of connections per IP address. Would the above help or be pointless? Keeping in mind everything is static checking for multiple request of the same page (html, css, js, etc) could be a sign of a attack. What are some measures i can take on a static content server?

    Read the article

  • Two routers, one off-site, same ISP-assigned static IP. A recipe for conflict?

    - by boost
    This is the situation I've inherited: There are two routers, one off-site. Both are connected to the ISP. The ISP assigns both of them the same static IP (or so it seems). Presumably, the network problems we're having are related to the idea that you can't have two instances of the same IP. So we rang up the folk off-site and told them to turn off the router. Now everything's working okay here. How do I get around this? Get another static IP? Figure out how to get the router to ask for a dynamic IP (as we're not using the static IP for anything)?

    Read the article

  • Publish Static Content to WebLogic

    - by James Taylor
    Most people know WebLogic has a built in web server. Typically this is not an issue as you deploy java applications and WebLogic publishes to the web. But what if you just want to display a simple static HTML page. In WebLogic you can develop a simple web application to display static HTML content. In this example I used WLS 10.3.3. I want to display 2 files, an HTML file, and an xsd for reference. Create a directory of your choice, this is what I will call the document root. mkdir /u01/oracle/doc_root Copy the static files to this directory  In the document root directory created in step 1 create the directory WEB-INF mkdir WEB-INF In the WEB-INF directory create a file called web.xml with the following content <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/j2ee/dtds/web-app_2_3.dtd"> <web-app> </web-app> Login to the WebLogic console to deploy application Click on Deployments Click on Lock & Edit Click Install and set the path to the directory created in step 1 Leave default "Install this deployment as an application" and click Next Select a Managed Server to deploy to and click Next Accept the defaults and click Finish  Deployment completes successfully, now click the Activate Changes You should now see the application started in the deployments You can now access your static content via the following URL http://localhost:7001/doc_root/helloworld.html

    Read the article

  • Managing JS and CSS for a static HTML web application

    - by Josh Kelley
    I'm working on a smallish web application that uses a little bit of static HTML and relies on JavaScript to load the application data as JSON and dynamically create the web page elements from that. First question: Is this a fundamentally bad idea? I'm unclear on how many web sites and web applications completely dispense with server-side generation of HTML. (There are obvious disadvantages of JS-only web apps in the areas of graceful degradation / progressive enhancement and being search engine friendly, but I don't believe that these are an issue for this particular app.) Second question: What's the best way to manage the static HTML, JS, and CSS? For my "development build," I'd like non-minified third-party code, multiple JS and CSS files for easier organization, etc. For the "release build," everything should be minified, concatenated together, etc. If I was doing server-side generation of HTML, it'd be easy to have my web framework generate different development versus release HTML that includes multiple verbose versus concatenated minified code. But given that I'm only doing any static HTML, what's the best way to manage this? (I realize I could hack something together with ERB or Perl, but I'm wondering if there are any standard solutions.) In particular, since I'm not doing any server-side HTML generation, is there an easy, semi-standard way of setting up my static HTML so that it contains code like <script src="js/vendors/jquery.js"></script> <script src="js/class_a.js"></script> <script src="js/class_b.js"></script> <script src="js/main.js"></script> at development time and <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js"></script> <script src="js/entire_app.min.js"></script> for release?

    Read the article

  • Add static ARP entries when network is brought up

    - by jozzas
    I have some pretty dumb IP devices on a subnet with my Ubuntu server, and the server receives streaming data from each device. I have run into a problem in that when an ARP request is issued to the device while it is streaming data to the server, the request is ignored, the cache entry times out and the server stops receiving the stream. So, to prevent the server from sending ARP requests to these devices altogether, I would like to add a static ARP entry for each, something like arp -i eth2 -s ip.of.the.device mac:of:the:device But these "static" ARP entries are lost if networking is disabled / enabled or if the server is rebooted. Where is the best place to automatically add these entries, preferably somewhere that will re-add them every time the interface eth2 is brought up? I really don't want to have to write a script that monitors the output of arp and re-adds the cache entries if they're missing. Edit to add what my final script was: Created the file /etc/network/if-up.d/add-my-static-arp With the contents: #!/bin/sh arp -i eth0 -s 192.168.0.4 00:50:cc:44:55:55 arp -i eth0 -s 192.168.0.5 00:50:cc:44:55:56 arp -i eth0 -s 192.168.0.6 00:50:cc:44:55:57 And then obviously add the permission to allow it to be executed: chmod +x /etc/network/if-up.d/add-my-static-arp And these arp entries will be manually added or re-added every time any network interface is brought up.

    Read the article

  • why do we need to put private members in headers

    - by Simon
    Private variables are a way to hide complexity and implementation details to the user of a class. This is a rather nice feature. But I do not understand why in c++ we need to put them in the header of a class. I see some annoying downsides to this: it clutters the header from the user it force recompilation of all client libraries whenever the internals are modified Is there a conceptual reason behind this requirement? Is it only to ease the work of the compiler?

    Read the article

  • Splitting up revenue among development team members on Apple's app store

    - by itaiferber
    A friend and I have started developing an app to put on Apple's app store. Development is going fine, but thinking ahead, we're trying to come up with an easy way to share any revenue coming from our efforts. The app store allows you to deposit your revenue into a single bank account, but there's no easy way to split revenue among several people. How do (small) dev teams split up revenue on their products, on, and off the app store? As far as I can tell, banks don't offer an easy way to automatically split the balance on an account 50-50 (or any other percentage, for that matter), especially on a regular basis. So how do teams deal with this? We're not incorporated, and we don't have an official business set up. We're considering depositing all the money into one of our accounts and manually transferring half the money to the other person, but this isn't sustainable over long periods of time. Is there a low-cost, sustainable, automatic process for handling these finances?

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >