Search Results

Search found 6064 results on 243 pages for 'usb 3'.

Page 20/243 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • How to boot Linux from a 16gb USB flash drive

    - by Chris Harris
    I'm trying to install Linux on a single partition of a USB flash drive that's larger than 4gb. The first place I went to is http://pendrivelinux.com. I can follow these instructions for installing Xubuntu 9.04 perfectly, which unfortunately break down when I try to scale it up beyond 4gb. There are several other tools to do this (unetbootin and usb-creator) which follow a very similar formula. I figured out that a big problem of mine was that all of these tools assume the USB drive is formatted in FAT32, which unfortunately cannot hold a single file larger than 4gb. This is unfortunate because I want to use just one partition, so that my persistance file, casper-rw, looks like one big partition to the OS once I've booted off of the USB drive. I then tried following a myriad of instructions involving formatting the drive as one large ext2 filesystem and using extlinux to create a single bootable ext2 file system. This doesn't work for me however, after about 20 attempts verifying and slightly tweaking the formula, I cannot seem to get a "good" bootable ext2 file system built. I'm not entirely sure what's going on, but it seems as though no matter how hard I try, I cannot get the ext2 file system to remain coherent after copying the Linux ISO contents over, copying the MBR, and executing extlinux to create the ext bootloader. Every time, after I follow these steps (in any order) and reboot, I get an unbootable USB drive. If I then mount the drive under Linux again, I see a mess of a file system (inodes have clearly been screwed up somewhere along the way). I suspected that the USB drive wasn't being fully flushed, so I tried using the "sync" and "unmount" commands before rebooting which didn't affect things at all. I guess I have several possible questions - but let's start with the obvious - is there something I'm missing to create a bootable ext2 USB flash drive that's large (e.g. 16gb)?

    Read the article

  • Apple Service Diagnostic application on USB key?

    - by Matt 'Trouble' Esse
    I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

    Read the article

  • Triple monitor setting in Linux with USB-HDMI adapter

    - by Oscar Carballal
    I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • hp DL380 G4 won't boot with disk plugged into front USB

    - by Kev
    We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

    Read the article

  • Use windows 7 inside virtual box,as guest i mean, to create a Windows 7 USB using "Windows 7 USB/DVD Download Tool" ? (Linux as host)

    - by Abel Coto
    I want to download the Windows 7 professional iso (x32), from microsoft, and , i can do two things. Or buy a new burner , as mine doesn't work (i am trying to decide what dvd writer i could buy) or use a usb dongle to copy the iso to it , and install it via usb. I want to install Windows 7 in a netbook that now has debian,and in my pc. I think i have to buy only the license for the pc , as the netbook came with windows 7 preinstalled, so i suppose that i can use that serial to activate the windows , although i don't know how to install windows 7 starter instead of professional (i think if you remove a file from the iso, windows let you choose the edition to install). The problem is that in both pcs there isn't any windows , only debian. My father has a netbook with windows 7 starter, but i think it hasn't antivirus (at least until have the Karspersky Internet security for 3 pcs bought ), and i don't trust to make the usb there , if i don't now that there isn't any virus or malware. So i am trying to find a way of Create a Windows 7 usb installation , to at least be able to install windows 7 in the netbook without a external dvd writer. I know that with dd in linux you can copy a debian.iso to the usb , and then install debian with it (i've done it) using something like dd if=win7.iso of=/dev/sdb, but i don't know if this would work for windows 7 iso,and if dd will correctly copy the iso to the usb. I suppose that if you are able to boot and install windows 7 from the usb , is that the method works,and you can forget of problems later with the windows 7 installation (problems because some files could not be copied or like). So , i remembered that Microsoft created a tool to copy the iso to the usb using windows. So i thought that i could install in my pc , virtual box , as i have VT and 8 GB ram in it, and download the iso from microsoft ,install windows 7 in the virtual machine , and then copy the iso inside the machine , donwload the iso tool, and atach a usb to the pc, connect it to the guest , and use the tool to copy the iso to the USB. But i don't now if is possible to use a virtual machine to do this , or the virtualization could give problems with the usb, or something. I have found some minutes ago this How to make a windows 7 usb flash install media, from linux? The first method (dd) is the one i like more , and i trust more ( i don't now if the second method using ms-sys , works well , and if i can trust it. I understand that a iso is like a .rar , but no compressed,only containing the files ,so mount the iso and cp the data inside perhaps is ok. Although the method i like more is the microsoft one (more because is from microsoft , and i suppose they now what they do ,at least with this usb related thing, than anything). Perhaps worth more to buy a external dvd writer haha ... Should the virtual machine method work ?

    Read the article

  • Known USB 2.0 devices don't install driver, but must be manually forced

    - by Darragh
    When a known USB 2.0 device is plugged in and detected, it doesn't install the driver correctly but shows a Code 28 error and lists the device under "Other Devices" in Device Manager. When view properties of this device , it shows the following status; The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. When updating the driver manually and selecting the appropriate driver Windows doesn't believes it's the correct driver, but you can force the installation and it works! The other condition the driver will auto-install is when the same USB device is plugged into a USB 3.0 port. Power related issues are not also causing this as I have tried vi a Docking station, USB hub. etc.. Devices tried; Jabra Headset USB-Mass Storage Device (flash disk and ext HD) MS Wireless Keyboard & Mouse USB Ethernet controller (USB-MAC controller) This is on a laptop part of a Domain with Windows 7 Ent 7601, I am logged in as a local administrator. There isn't any Group Policies blocking not signed driver or whitelisted devices on the domain. Any suggestions please feel free

    Read the article

  • What are USB device resets?

    - by ILIV
    I have this brand-new software RAID-1 built with two WD Elements external USB drives, and I can see that Linux repeats the following message quite a bit: ... [302148.036912] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd [302153.052029] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302186.031481] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302217.050210] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302281.043543] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302312.090158] usb 1-3.3: reset high-speed USB device number 20 using ehci_hcd [302351.076851] usb 1-3.1: reset high-speed USB device number 19 using ehci_hcd ... So, what does it say? Is this normal? Is this a problem that I should try to fix?

    Read the article

  • USB Drive that simultaneously connects to more than one computer

    - by user2499
    Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

    Read the article

  • Live CD / Live USB much faster than full install

    - by user29347
    I've observed it on both laptops I own! HP Compaq nx6125 and Ubuntu 11.04 x64 - somewhat solved Lenovo Thinkpad T500 and Ubuntu 11.10 x64 - help needed! I'm still struggling with the Thinkpad to get performance level similar to that of 10 y.o. laptops... All in all a really serious issue with multiple versions of Ubuntu that renders computers with perfectly compatible hardware unusable, as far as out of the box experience is concerned. Troubleshooting resultant issues seems to be a hard case even for users with some experience with installing graphics drivers. EDIT: I can't really post additional details. Two different ubuntu versions, two laptops, two different set of graph. drivers (OS vs ATI prop.) - all with the same symptoms. Also I can't stress enough how massive the performance degradation is compared to a healthy system. For that reason I ask for input from people who may know roughly what are we dealing with here. I can post more details if we were to focus on my current Thinkpad T500. In that case my current system details: Lenovo Thinkpad T500 Ubuntu 11.10 x64 ATI Mobility Radeon HD 3650 (also see the "What I have already tried" section about Intel graphics tested) ATI Catalyst 11.10 drivers OCZ Agility 3 SSD but! same with the default driver for ATI the card same with the prop. driver for the ATI card from Jockey (Additional drivers applet) What I have already tried: 0. Switching to Intel integrated card (Intel GMA 4500M HD) with the default driver - same effects = may indicate not driver related problem but a problem with something of global influence like e.g. nomodeset or other I don't even know about. (What you can read above) ATI Catalyst 11.10 and radeon.modeset=0 boot parameter + disabled Wait for VBlank. Unity 2D Ubuntu 10.04 LTS tested (ubuntu-10.04.3-desktop-i386.iso): Both live USB and installed version blazing fast! (on the default drivers - without even installing the proprietary fglrx drivers). re2 a) seems to give me the only significant results (still poor) - perfect Unity elements performance with the same crawling stuttering/lagging when dragging windows around. re2 b) this happens often http://i17.photobucket.com/albums/b68/Bucic/ubuntuforumsorg/Screenshotat2011-10-28083140.png re2 c) Sometimes I am able to witness a normal performance when dragging a window around but only for a second or two. When I try to shake it longer it starts to lag and it will keep lagging like that with an increased probability of what you see in the sshot in point re2 b). re2 d) I can't establish the radeon.modeset=0 influence though. Once it seems to work be smooth with it, the other time - without it. Really can't tell.

    Read the article

  • Run Windows XP on a usb drive virtually on Windows XP?

    - by Russell
    I am sick of not being able to run and install certain applications on my work computer due to admin restrictions (eg: Adobe AIR) . I have heard of smaller versions of Windows running on a usb thumb drive and have looked into it but can't find anything on running windows virtually from a usb drive. I would like to be able to login to this particular computer, insert my usb drive and then open up another version of windows installed on the thumb drive while still being able to use the windows I logged in on (literally be able to alt+tab between the main desktop and the virtual desktop from the usb drive). Is this even possible? For further clarification: The version of windows has to be Windows XP and there is no other option available for what I want to do. Looking forward to a response.

    Read the article

  • USB 3.0 hub; what can it power?

    - by pouzzler
    I own an Asus UX31A laptop, equipped with 2 USB 3.0 ports. I would like to connect several USB devices to one of these ports, using a USB 3.0 hub. 1) Am I correct in assuming the Asus "USB Charger+" commercial blurb corresponds to the USB 3.0 standard "Battery Charging Specification 1.2", and furthermore inferring that the laptop can deliver 1.5A through a USB port? 2) Does a powered external USB 3.0 hard drive draw on the USB power lines? 3) I would like to connect the aforementionned drive, an android phone, and a 200mA rated optical mouse to an unpowered USB 3.0 hub, itself plugged into the laptop. Should my above assumptions be false, would this setup be able to power all three devices? Thanks to the usb guru who'll settle my fears to rest. Best regards, Sébastien

    Read the article

  • Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

    - by Alastair
    We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

    Read the article

  • Anything such as a usb laptop charger?

    - by iNinja
    I am looking for a laptop charger that requires no power outlet but instead utilizes a usb port of another computer to charge my laptop. That is, I am seeking a usb-to-laptop port charger, NOT power outlet-to-laptop's usb charger. Is such a product even possible? I am guessing no since the usb port would not be able to supply enough electricity to power the laptop, even to maintain the battery (not charge it).

    Read the article

  • Using USB HDD with Arcserve / Brightstor

    - by Hilt86
    I am having an issue configuring a standard USB HDD for use with CA Arcserve Brightstor 11.5 SP2 : Under the device list it shows a USB device category but none of my USB drives are listed underneath. I have attempted to "scan devices" but it makes no difference. I have also tried restarting the tape engine to no avail! Is anyone successfully using USB drives with Brightstor?

    Read the article

  • USB 3 port fails to enable my keyboard during boot

    - by Jay
    My laptop has both USB 2.0 and 3.0 ports. I've connected: mouse -- USB 2.0 port keyboard -- USB 3.0 port On starting the system, the mouse is active however the keyboard does not function. Everytime i have to disconnect the keyboard and plug it back in and only then it becomes active. Is there any fix to this problem or is the USB port itself faulty? specs: Dell XPS, 64-bit i7 processor with 8G of RAM

    Read the article

  • Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

    - by Jason Fitzpatrick
    You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

    Read the article

  • Can I do an install onto a 4GB usb stick which is smaller than the recommended installation size?

    - by Radek
    I've read through this question: How do I install Ubuntu to a USB key? So I am aware how to install Ubuntu onto a USB stick. I'm also aware that the minimum recommended HDD requirement for ubuntu is 5GB. my question is specifically, can I squeeze the install of Ubuntu 11.10 onto a 4GB usb stick? Can I do so without downloading alternate version of Ubuntu? All I want is firefox wi-fi What I have live USB of Ubuntu 11.10 notebook without hdd internet access 4GB usb stick The reason why I need full install is to install new programs (skype) and do upgrade (of flash player)

    Read the article

  • How to make Logitech Anywhere MX work in Ubuntu 12.X?

    - by alfC
    I have a Logitech Anywhere MX mouse (wireless), when I connect it to the computer it doesn't work. The mouse works in other computers with Windows and with Fedora 17, but it doesn't work in two different computers with Ubuntu 12.04 and 12.10. Moreover these same computers work with another Microsoft wireless mouse. So I think the combination of Logitech MX and Ubuntu doesn't play well. The dmesg log entry looks like this: [ 578.845838] usb 3-2: Product: USB Receiver [ 578.845841] usb 3-2: Manufacturer: Logitech [ 578.851625] logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 578.851899] logitech-djreceiver 0003:046D:C52B.0009: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32 [ 578.854518] logitech-djreceiver: probe of 0003:046D:C52B.0009 failed with error -32 Instead of the expected (taken from Fedora): [154344.634520] usb 2-1.2: Manufacturer: Logitech [154344.647935] logitech-djreceiver 0003:046D:C52B.000D: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2 [154344.653788] input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.000D/input/input21 [154344.654192] logitech-djdevice 0003:046D:C52B.000E: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:1d.0-1.2:1

    Read the article

  • Internal drives vs USB-3 with external SSD or eSata with External SSD

    - by normstorm
    I have a need to carry VMWare Virtual Machines with me for work. These are very large files (each VM is 20GB or more) and I carry around about 40 to 50 VM's to simulate different software configurations for different client needs. Key: they won't fit on the internal hard drive of my current laptop. I currently execute the VM's from an external 7200RPM 2.5" USB-2 drive. I keep copies of the VM's on other 5400 external USB-2 drives. The VM's work from this drive, but they are slow, costing me much time and frustration. It can take upwards of 30 minutes just to make a copy of one of the VM's. They can take upwards of 10-15 minutes to fully launch and then they operate sluggishly. I am buying a new laptop (Core I7, 8GB RAM and other high-end specs). I intend to buy an SSD for the O/S volume (C:). This SSD will not be large enough to hold the VM's. I have always wanted a second internal hard drive to operate the VM's. To have two hard drives, though, I am finding that I will have to go to a 17" laptop which would be bulky/heavy. I am instead considering purchasing a 15" laptop with either an eSATA port or USB-3 ports and then purchasing two external drives. One of the drives might be an external SSD (maybe OCX brand) for operating the VM's and the other a 7400RPM 1TB hard drive for carrying around the VM's not currently in use. The question is which options would give me the biggest bang for the buck and the weight: 1) 2nd Internal SSD hard drive. This would mean buying a 17" laptop with two drive "bays". The first bay would hold an SSD drive for the C: drive. I would leave the first bay empty from the manufacture and then purchase/install an aftermarket SSD drive. This second SSD drive would have to be very large (256 GB), which would be expensive. I would still also need another external hard drive for carrying around the VM's not in use. 2) 2nd internal hard drive - 7400 RPM. Again, a 17" laptop would be required, but there are models available with on SSD drive for the C: drive and a second 7200 RPM hard drives. The second drive could probably be large enough to hold the VM's in use as well as those not in use. But would it be fast enough to drive the VM's? 3) USB-3 with External SSD. I could buy a 15" laptop with an SSD drive for the C: drive and a second hard drive for general files. I would operate the VM's from an external USB-3 SSD drive and have a third USB-3 external 7200 RPM drive for holding the VM's not in use. 4) eSATA with External SSD. Ditto, just eSATA instead of USB-3 5) USB-3 with External 7400 RPM drive. Ditto, but the drive running the VM's would be USB-3 attached 7400 RPM drives rather than SSD. 6) eSATA with External 7400 RPM drive. Dittor, but the drive running the VM's would be eSATA attached 7400 RPM drives rather than SSD. Any thoughts on this and any creative solutions?

    Read the article

  • USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

    - by Mike
    The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

    Read the article

  • Map /dev/bus/usb node to /sys node on Linux

    - by Cody Brocious
    I'm using libusb to find and access a USB device, but once I get the information I need from there, I need to map it to a /sys node. This could be to the actual USB bus it's on, the /sys/bus/usb-serial node (which is where I'm going to get eventually), or effectively anywhere else since I can walk the tree from there. I can get to a /dev/bus/usb node easily enough, but I'm a bit lost from there. What would be the best route to perform this mapping? Alternatively, a way to get the /dev/ttyUSB device node for a /dev/bus/usb node would work as well, since it gets me the same result.

    Read the article

  • Booting from a USB drive that was originally a boot drive

    - by daveh551
    When Win 7 went RTM, I upgraded my laptop from XP. But to protect myself against the possibility of having data inaccessible, I got a new disk and put it in the laptop, and took the old (XP) disk and put it in a USB enclosure. I have no trouble accessing the data on the USB drive under Windows 7. But I would like to be able to plug it in, tell the BIOS to boot from the USB drive, and be back on my old machine. The laptop is a Dell Precision M90, and it has a boot from USB option in its boot menu. But when I try to do that, it does read the drive, gets as far as putting up the Windows XP splash screen and starting the boot progress bar, and then reboots. What do I need to do to the old disk now running on USB to allow the machine to boot from it?

    Read the article

  • usb device in dual mode on gentoo linux

    - by Idlecool
    i am having a flip flop usb modem which has two modes 1 usb mass storage mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fff5 ONDA Communication S.p.A. 2 usbserial mode: root@devbox:/media/F872F0FD72F0C184/Users/idlecool/Downloads# lsusb Bus 006 Device 003: ID 19d2:fffe ONDA Communication S.p.A. by default whenever i plug the modem to the usb port.. the linux machine recognize it as a usb mass storage device.. how can i make it load as usbserial device i have been using a package usb_modeswitch in the past on ubuntu 10.04 but i cannt install the same package on gentoo live cd.. even udev is not installed on live cd.. how to change the product-id of the usb device on gentoo live disc without udev.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >