Search Results

Search found 7728 results on 310 pages for 'wifi driver'.

Page 20/310 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • Wifi hotspot to connect to Android using non-AP supported cards

    - by 3l4ng
    I'm running Ubuntu 13.10 64b on a Dell Inspiron N5010. My wireless device (found using lspci) is Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01). I bought a new android phone and want to connect to Internet by using the laptop as a Wireless Access Point (ad-hoc doesn't work with Android). I tried following tutorials like the one at How to setup a wi-fi hotspot (access point mode)?. The relevant output from iw list was Supported interface modes: * IBSS * managed Running sudo hostapd /path/to/conf/file gave me (eth1 is the wireless, verified by iwconfig) Failed to create interface mon.eth1: -95 (Operation not supported) Could not set channel for kernel driver eth1: Unable to setup interface. Could not connect to kernel driver. I am able to use Connectify and Virtualrouter on Windows, and the phone works great. How do I get an access point running on Ubuntu? I'm open to other alternatives as well.

    Read the article

  • wifi problems with lenovo g580 on kubuntu-13.04-desktop-amd64

    - by user203963
    i have a wifi connection problem in lenovo g580 on kubuntu-13.04-desktop-amd64. ethernet cable is working properly but wifi does'nt connect below are some hardware information sudo lshw -class network gives *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:89:84:3d:e9:10 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:90500000-9053ffff ioport:2000(size=128) *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:90400000-90403fff *-network description: Wireless interface physical id: 3 logical name: wlan0 serial: 68:94:23:fa:2c:d9 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.8.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn lsubs gives Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0489:e032 Foxconn / Hon Hai Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd lspci gives 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Does anyone knows the solution? rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 3: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • Graphic Card Installation Failure (NV 9600M GT)

    - by Georg
    I wanted to switch from 7 to Ubuntu. Now, the first thing that holds me back is the installation of the driver for my Nvidia 9600M GT. Ubuntu recommends me 4 drivers from the "Additional Driver" Section. Now, whatever driver I install, there are four things happening RANDOMLY after rebooting: The pc freezes before seeing bootup splash The pc freezes while seeing bootup splash image (ubuntu logo with the 5 dots) The pc gets into login screen and freezes instantly (Thought the unity-bar is transparent now) The pc freezes right after beeing able to login. (While this is happening the unity-bar changes from transparent to ugly-flat-style) I also tried to install the official Nvidia .run file but after exiting the X-Server, it says the driver is not compatible with the kernel and exits installation. Can somebody help me? I really wanna get rid of Windows :( But Ubuntu drives me perfectly insane. Please answer as noobish as possible. I'm an expert Windows user, but Linux is absolutely new to me. My Specs: Ubuntu 11.10 installed from USB Stick (like 100 times now :/ because I dont know how to remove the driver in recovery mode) 9600M GT 4GB Ram Intel Centrino 2 Dual Core 2.26GHz Win 7 and Ubuntu running along side. Thank you in advance, regards.

    Read the article

  • Can't connect to WIFI after sleep Ubuntu 14.04

    - by user3380404
    After an upgrade over a previous version to Ubuntu 14.04 I have problems with connecting to WiFi. After suspending it won't reconnect to any existing network unless I restart the laptop. sudo lshw -C network: *-network description: Ethernet interface product: 82567LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:27:13:b4:d3:58 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:45 memory:fc200000-fc21ffff memory:fc225000-fc225fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:c6:6b:c8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-29-generic firmware=8.83.5.1 build 33692 ip=10.0.1.160 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:48 memory:f4200000-f4201fff

    Read the article

  • Wifi networks will not show up!

    - by Kcahmadi
    I'm running Ubuntu 14.04 on an old '08 macbook. I've gone to system settingsSoftware & UpdatesAdditional Drivers and enabled the wireless driver. But when I click the wifi icon on the top toolbar no networks show up. When running lshw it clearly shows my wireless card under Network controller and it says the driver is installed. However, nm-tool only shows ethernet. And rfkill only shows bluetooth. What can I do?

    Read the article

  • How to determine the version and origin of proprietary drivers installed by Additional Drivers?

    - by Bribles
    How can I tell which version and from which repository the Additional Drivers tool is trying to install the fglrx graphics driver? It says that I have a different version of the driver in use. I installed the driver from maverick/restricted and apt-cache tells me it's from a regular Ubuntu mirror. The installed version is the same as the candidate version. Can I get Additional Drivers to tell me what it would install if I activated the driver through it? Is it possible Additional Drivers just assumes it's a different version since it was installed by a different process?

    Read the article

  • Network Manager troubleshooting

    - by Anero
    I'm having some issues when connecting to my house's wifi from my Ubuntu 10.10 laptop. If the connection doesn't exists, when selecting the network (and after entering the WPA2 password) I'm able to connect. Once the connection is saved, when trying to reconnect, Network Manager works for a minute or so and then fails; the only way to reconnect then is to delete the saved connection and re-select the network from the list of available wireless networks. The same network works with no issues on the same laptop when running Win7, and on other wireless networks when running Ubuntu. Is there a Network Manager log which I can take a look at for troubleshooting the issue? Are there any tools for checking the wifi status?

    Read the article

  • How do I install drivers for an AMD Radeon HD 6450?

    - by vanysha
    Hi everyone! I bought new computer. The Graphics card is AMD Radeon HD 6450, on Windows 7 it works fine but I try to install driver on Ubuntu, and it says that "No supported adapters detected". I downloaded the driver from here. After installing "Aditional drivers" says that driver is installed. Also my screen resolution in Ubuntu is not maximum. Can you help me install proper driver, please? Thanks in advance!

    Read the article

  • Shader Model 3.0 not available

    - by Romy
    I have Acer 4745G with ATI HD 5650 1GB VRAM. After I installed the COD Black Ops trough Wine Playonlinux and successfully installed, and I play the game and then appear message "Shader Model 3.0 not available". I have installed ATI driver 11.8 when I trying this game. And then I'm trying to install the driver from menu "System Administration Additional Driver, it doesn't work. I cannot log in, in the screen appear only the text for log in. And then I uninstall it trough recovery mode. And then I download ATI driver 11.11 from official ATI/AMD website, and then I restart my computer and my screen appearing only text again. I'm using Ubuntu (Ultimate Edition) 11.04. How to overcome this problem?

    Read the article

  • Wifi randomly drops on Windows 8 laptop

    - by JosiahS
    First of all, I did a lot of research on this problem, and I wasn't able to come to any helpful conclusion. I've finally decided that I need advice from those who might know where to look. So don't let me down. :P I used to have an older Windows 7 laptop, which worked great for basic office and web browsing. However, I wanted something that would play actual modern games. So I recently bought a Sager NP8235 with the Intel Wireless-AC 7260 wifi card, and installed Windows 8 Pro on it. And ever since, I've been having problems with the wifi. Generally, what happens is if I leave the laptop on but inactive for an extended amount of time (I've estimated it around an hour to two), the wifi will start dropping randomly. If I happened to have a download going at the time, it usually causes the download to fail. Or, if I put the laptop to sleep overnight, the next morning I usually have to restart the computer because the wifi device apparently stops working (it literally won't turn on). Also, and most frustrating, whenever I'm on a video chat (like Skype), after about ten minutes, the connection will start lagging like crazy, until it forces Skype to end the call. After that, I usually have to disable and reenable the wifi to get it working again. I know it isn't our internet, because all the other computers in our house (~8) don't have any issues. Even the old Windows 7 laptop (connected also over wifi) works just fine, scoring the normal ~3Mbps average on speedtest.net (yes, I know our internet is slow, we live out in the country). Additionally, when I connect the Sager directly to the router via ethernet, the internet instantly starts working just great. Like I said, I've done a lot of googling to figure out what's going on, and I haven't been able to find anything that worked for me. Is it Windows 8 conflicting with the Wifi drivers? As of this writing, I have the Intel drivers v16.1.5.2 installed (without the extra Intel software). Or is it our router? It's a TP-Link TL-WR841ND, set to the default settings. The Sager is currently being assigned to a static IP, if that makes any difference. And yet, the old windows 7 laptop has a much more stable connection than the Sager. Anyone have any ideas? At this point, I'd appreciate even knowing what the problem is.

    Read the article

  • How to scan for available networks for Blackberry device from application?

    - by amsiddh
    Hi All, Is there any RIM API available which will help to get the list of available network service or only Wi-Fi networks for a device and set selected network access point for any network communications? Is it possible programmatically to disable the Mobile networks like GPRS, WAP, etc? For Ex: When a application is started it should scan for WiFi connections (even if there are no previous WiFi network access points are set on device) and list the available WiFi connection. Then user will select the appropriate WiFi connection to connect for any network communication. Outside the application any internet communication (like browser or any other application) should done through same selected WiFi connection. The scanning for WiFi and setting the connection is almost similar to Blackberry WiFi Setup. If anyone know how to implement this using available RIM API and let me know its possible or not. Please share if anyone have any code snippet related to this. I am looking for OS v4.5, 4.7, and 5.0. Thanks, siddh.

    Read the article

  • Wifi network stopped being visible (and usable) (Linksys wag320n)

    - by s427
    Basically, my wifi network simply stopped working for no apparent reason. It doesn't appear in the list of the available networks anymore. I can see all my neighbors' networks, but not mine. It's as if it doesn't exist anymore. The internet connection (non-wifi), which goes through the same modem/router, is fine though. I already had a similar problem about one year ago (see here: Wifi network SSID not visible ), just after buying this very modem. I finally got it to work after performing two factory resets and getting rid of the Cisco "Magic" software; but this time it's not working. I use a linksys router-modem (WAG320N) which is directly connected (via network cable) to my desktop computer (Windows 7). I have (mainly) two devices that use the wifi network: my phone (Samsung Galaxy Nexus) and an Asus tablet (TF201, aka Transformer Prime). I also resurrected an old laptop computer (Dell, running Windows XP) to test that, and it doesn't see anything either (apart from the 20 other wifi networks, of course ^^). This wifi network was working just fine and has been for about a year. I haven't touched the modem settings so I have no idea what's causing the problem. I tried: making my phone "forget" about my network, hoping it would see it again after that: no luck. re-entering the network informations (SSID/password) manually on my phone: still no luck (says it's not in range) exporting the modem configuration, resetting the modem (factory reset, via modem admin), restarting it, importing the configuration: nope. factory reset, turning it off for 15 minutes, restarting, re-factory reset, and entering the configuration manually: still nothing. Has anybody experienced something similar before? Have you any suggestion to fix that? Thanks in advance. PS: to clear things up, here are the settings of my modem regarding wifi: Basic wireless settings: Configuration: manual Radio Band: 2.4GHz Wireless Network Mode: B/G/N-Mixed SSID: s427 Channel Bandwidth: Wide - 40 MHz Channel Wide Channel: 9 - 2.452GHz Standard Channel: 11 - 2.462GHz SSID Broadcast: Enable Advanced Wireless Settings AP Isolation: Disable Authentication Type: Auto Basic Rate: Default Transmission Rate: Auto N Transmission Rate: Auto CTS Protection Mode: Disable Beacon Interval: 100 DTIM Interval: 1 Fragmentation Threshold: 2346 RTS Threshold: 2346

    Read the article

  • WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

    - by el10780
    After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

    Read the article

  • Intel Rapid Storage Technology (pre-OS) driver installation

    - by Nero theZero
    My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

    Read the article

  • fglrx-legacy-driver not seeing Radeon HD 4650 AGP

    - by Rocket Hazmat
    I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got fglrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci EDIT: fglrx 12.4 seems to work. Thing is, since I am on kernel 3.2, I need to apply this patch to common/lib/modules/fglrx/build_mod/firegl_public.c. I thought ATI dropped support for the 4xxx series after 12.4. Why doesn't 12.6 legacy work?

    Read the article

  • fglrx-legacy-driver not seeing Radeon HD 4650 AGP

    - by Rocket Hazmat
    I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got glrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci

    Read the article

  • Compiling and installing UFRII driver for Canon IR2520 on a headless Ubuntu 12.04 Server

    - by nixnotwin
    I want to setup a headless Ubuntu 12.04 machine as a print server. The printer is Canon IR2520 which needs UFRII driver. Printer is connected to the network via Ethernet. After searching a lot about weather printer can be directly accessed as a SMB share, I decided to make Ubuntu server as print server. The Windows clients send the print jobs to the server and the server will send those jobs via Ethernet to the printer. I followed this how-to for installing the driver. The driver compilation fails with the error that gtk 2.0 package is not available. I cannot have gtk on a headless server, it is very necessary that it should not have any graphical/desktop packages. What would be the solution for installing UFRII on Ubuntu 12.04 Server.

    Read the article

  • Realtek HD Audio Driver for Ubuntu 12.04?

    - by Shifat Taushif
    I recently switched to Ubuntu 12.04 on my Toshiba laptop. I haven't had any issues except for one. I realized that there is a red light coming out of my earphone jack. It's something like this: http://i.stack.imgur.com/gokuH.jpg I looked in the folder that Toshiba created for installing drivers , then I found out that they had installed this driver for my sound card : Realtek HD Audio Driver v6.0.1.5689_withMaxxAudio_Compal(20080908) I'm guessing that the sound card supports Optical Audio Output. I also found out that when I mute the speakers, the light goes away. But when I unmute it, it comes back. I don't really mind having it but it drains my battery. So, is there a Ubuntu version for my sound card driver? Thanks in advance.

    Read the article

  • NVIDIA Geforce gt 555m driver install problem

    - by mir
    I recently installed ubuntu 12.04 on my asus N55SF, which runs nvidia geforce gt 555m and an integrated graphics, via optimus but after installation i found no such thing on ubuntu. i went o nvidia website and installed the driver from there(ver 259.59 i guess) after reboot, i was stuck at 640x480 resolution and my card was still undetected i reinstalled ubuntu but this time i installed bumblebee, but the system settings still shows the graphics as 'unknown' i dont know whether the driver has been installed or not, but from the 'unknown' i figure its not there. when i run sudo nvidia-settings i get this msg "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server." however i can run the settings page by sudo nvidia-settins -c :8 i just want to know why ubuntu hasnt still detected the gpu? is it because bumblebee disables it? and i forgot one v important thing..I AM A NOOB :(

    Read the article

  • I cannot install a proporietary fglrx driver

    - by Chris
    OK my install failed while installing the amd proprietary driver. I keep seeing references to a Nvidia driver, but I do not have or even want anything pertaining to Nvidia. Here are my latest entries for the jockey.log: 2012-10-11 20:31:24,103 DEBUG: fglrx_updates is not the alternative in use 2012-10-11 20:31:24,119 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,119 DEBUG: fglrx_updates is not the alternative in use 2012-10-11 20:31:24,322 DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,323 DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking 2012-10-11 20:31:24,450 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,450 DEBUG: fglrx_updates is not the alternative in use 2012-10-11 20:31:24,465 DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf 2012-10-11 20:31:24,465 DEBUG: fglrx_updates is not the alternative in use

    Read the article

  • X doesn't find nvidia module when installing developer driver

    - by Nils
    I just downloaded the developer driver from Nvidia's CUDA Zone. Executed it and typed in restart gdm and the it worked. However after rebooting X didn't come up (xorg log), to fix it I can simply rerun the installer and the restart gdm again. What I don't understand is where it breaks and why X11 doesn't find the module?! I removed all (I think..) of the Nvidia packages which can with Ubuntu 10.10. I've also googled a bit and found some HOWTOs about manually installing the Nvidia driver. However all of them were for an earlier version of Ubuntu. Please do not respond telling me I should use the proprietary Nvidia driver supplied by Ubuntu, because I need the development drivers.

    Read the article

  • How to choose which network connection provides the default gateway in Windows XP

    - by Cathy
    I have a laptop with an integrated NIC and a WiFi connection. Both the wired and wireless networks I am using can access the Internet. Win XP is routing all traffic through the wireless network. I want to force it to route everything through the wired network when it is available (i.e. when I am sitting at my desk with the laptop docked) and through the wireless when that is the only option (i.e. when I have undocked my laptop and carried it to a conference room, or if I am out of the office working on a different WiFi network). The wireless connection cannot be established until after I am logged into Windows, so it's always the second network to become available to the OS. I have manually overridden the metric values in the TCP/IP configurations so that the NIC has metric 10 and the WiFi has metric 20. However, Windows is still picking the WiFi adapter's address as the Default Gateway, so this isn't helping. If I manually disable and re-enable the WiFi adapter, then it will switch the default gateway to the wired network and stay that way until I shutdown Windows. How can I tell Windows XP not to replace the default gateway when the WiFi connection is first enabled?

    Read the article

  • How to use driver for printer?

    - by jamie
    I've been trying to get my Lexmark x1290 to work on Ubuntu 12.04. According to this post, the z600 driver should work to print, so I downloaded the z600 driver from here and installed it through the Ubuntu Software Center. I plugged in my printer and went to the "Printer" section under System Settings... and followed the wizard to install it. It showed up as "1200-series" but never gave me a choice to choose the driver and when I try to print to it, it pops up a message that it is printing and then that it is done printing, but it is definitely not printing anything. What am I doing wrong here?

    Read the article

  • You do not appear to be using the NVIDIA X driver

    - by Vishal shekhar
    my laptop has nvidia GT540m yesterday i install nvidia-current after updating fromsudo apt-add-repository ppa:ubuntu-x-swat/x-updates then i write sudo nvidia-xconfig and then reboot my desktop visual effect changes and it look good like nvidia is working but still glx i not working and nvidia-setting tells me that You do not appear to be using the NVIDIA X driver my dkms status is nvidia-current, 304.43, 3.2.0-30-generic-pae, i686: installed lspci |grep VGA output : 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) also i can not login to my admin account but when i login to standard user or guest it works but still NVIDIA X driver is not working can any one suggest something so that NVIDIA X Driver start working as i seen many forum but none worked for me earlier i tried nvidia-173 ,nvidia-current(before x-swat/updates reprository) but none works for me

    Read the article

  • Fixing Mobility Radeon HD3650 driver in 12.04 LTS

    - by Kevin
    Okay, I know the subject has been discussed many times, but i dont find any of the instructions working. Most promising guide was here https://launchpad.net/~makson96/+archive/fglrx ive also tried https://help.ubuntu.com/community/BinaryDriverHowto/ATI because since the driver installation was written on other sites as well, this page included a "patch" file, but since im unaware how to patch installations, im out of luck. If i understand correctly, the patch should fix the driver and eliminate constant error messages. My system is 64bit 12.04 LTS and card is Mobility Radeon HD3650. Usual installation of the driver results in weird display resoulution (1100x something, while it should be 1440x900) and even 3d games did not work. Can anyone give me any more pointers? Much appreciated!

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >