Search Results

Search found 5756 results on 231 pages for 'drop'.

Page 200/231 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

• Complete Guide to Networking Windows 7 with XP and Vista

  - by Mysticgeek

  Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Adding A Custom Dropdown in RCDC for Forefront Identity Manager 2010

  - by Daniel Lackey

  My latest exploration has been FIM 2010 for Identity Management. The following is a post of how to add a custom dropdown for the FIM Portal. I have decided to document this as I cannot find documentation on how to do this anywhere else. I hope that it finds useful to others.   For starters, this was to me not an easy task to figure out. I really would like to know why it is so cumbersome to do something that seems like a lot of people would need to do, but that’s for another day J   The dropdown I wanted to add was for ‘Account Status’ which would display if the account is ‘Enabled’ or ‘Disabled’ in the data source Active Directory. This option would also allow helpdesk users or admins to administer the userAccountControl attribute in AD from the FIM Portal interface.   The first thing I had to do was create the attribute itself. This is done by going to Administration à Schema Management from the FIM 2010 portal. Once here, you click on All Attributes. What is listed here are all attributes and their associated Resource Types in FIM. To create the ‘AccountStatus’ attribute, click on New. As shown below, enter ‘AccountStatus’ with no spaces for the System Name and ‘Account Status’ for the Display Name. The Data Type is going to be ‘Indexed String’. Click Next.           Leave everything on the Localization tab default and click Next.   On the Validation tab as shown below, we will enter the regex expression ^(Enabled|Disabled)?$ with our two desired string values ‘Enabled’ and ‘Disabled’. Click on Finish and then and Submit to complete adding the attribute.       The next step involves associating the attribute with a resource type. This is called ‘Binding’ the attribute. From the Schema Management page, click on All Bindings. From the page that comes up, click on New. As shown below, enter ‘User’ for the Resource Type and ‘Account Status’ for the Attribute Type. This is essentially binding the Account Status attribute to the ‘User’ Resource Type. Click Next.    On the ‘Attribute Override’ tab, type in ‘Account Status’ for the Display Name field. Click Next.   On the ‘Localization’ tab, click Next.   On the ‘Validation’ tab, enter the regex expression ^(Enabled|Disabled)?$ we entered previously for the attribute. Click Finish and then Submit to complete.   Now that the Attribute and the Binding are complete, you have to give users permission to see the attribute on the User Edit page. Go to Administration à Management Policy Rules. Look for the rule named Administration: Administrators can read and update Users and click on it. Once it opens, click on the ‘Target Resources’ tab and look at the section named Resource Attributes. Type in at the end the ‘Account Status’ attribute and check it with the validator. Once done click on OK to save the changes.         Lastly, we need to add the actual dropdown control to the RCDC (Resource Control Display Configuration) for User Editing. Go to Administration à Resource Control Display Configuration. From here navigate until you find the RCDC named Configuration for User Editing RCDC and click on it. The following is what you will see:       First step is to export the Configuration Data file. Click on the Export configuration link and save the file to your desktop of other folder.   Find the file you just exported and open the file in your XML editor of choice. I use notepad but anything will work. Since we are adding a dropdown control, first find another control in the existing file that is already a dropdown in FIM. I used EmployeeType as my example. Copy the control from the beginning tag named <my:Control… to the ending tag </my:Control>. Now take what you copied and paste it in whatever location you desire within the form between two other controls. I chose to place the ‘Account Status’ field after the ‘Account Name’ field. After you paste the control you will need to modify so it looks like this:       Notice where you specify what attribute you are dealing with where it has AccountStatus in the XML. Once you are complete with modifying this, save the file and make sure it is a .xml file.   Now go back to the Configuration for User Editing screen and look at the section named ‘Configuration Data’. Click the ‘Browse’ button and find the XML file you just modified and choose it. Click OK on the bottom of the window and you are done!   Now when you click on a user’s name in the FIM Portal, you should see the newly added dropdown box as below:       Later I will post more about this drop down, specifically on how to automate actually ‘Disabling’ the account in the data source through the FIM Workflows and MAs.   <my:Control my:Name="AccountStatus" my:TypeName="UocDropDownList" my:Caption="{Binding Source=schema, Path=AccountStatus.DisplayName}" my:Description="{Binding Source=schema, Path=AccountStatus.Description}" my:RightsLevel="{Binding Source=rights, Path=AccountStatus}"> <my:Properties> <my:Property my:Name="ValuePath" my:Value="Value"/> <my:Property my:Name="CaptionPath" my:Value="Caption"/> <my:Property my:Name="HintPath" my:Value="Hint"/> <my:Property my:Name="ItemSource" my:Value="{Binding Source=schema, Path=AccountStatus.LocalizedAllowedValues}"/> <my:Property my:Name="SelectedValue" my:Value="{Binding Source=object, Path=AccountStatus, Mode=TwoWay}"/> </my:Properties> </my:Control>

  Read the article

• SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

  - by pinaldave

  I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presending at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal Pinal Dave presending at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presending at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• SQLAuthority News – Author Visit Review – TechMela Nepal – March 29-30, 2010

  - by pinaldave

  I was very fortunate to attend TechMela at Kathmandu, Nepal on 29th and 30th of March 2010. I would like to thank Allen Bailochan Tuladhar from Microsoft MDP Nepal for inviting me. Allen is a person with seemingly infinite energy and unlimited passion for Microsoft Technology. If you get an opportunity to spend just one hour with him, you will surely be more enthusiastic with regards to Microsoft Technology. And, I was lucky enough that I was able to spend about a total of 9 days with him in Kathmandu, working along with him in the Tech Community. TechMela Nepal Pinal at TechMela, Nepal TechMela is considered as one of the biggest events in Nepal, having been organized by Microsoft MDP Nepal. This event was attended by around 500 students and hundreds of Tech professionals. The event was handled very professionally and at very large scale. Every minor detail was properly planned and obviously thought out well. There were around 50+ volunteers from MS MDP who were monitoring this event systematically to make sure the event would run as smooth as planned. Attendees in Geek T-Shirts During this event, I was delighted to meet David Lim of Microsoft Singapore. He is very passionate in working for Microsoft Technology, as well as building deep relations with the Community. I was fortunate to spend my entire afternoon with him during the sight-seeing trip. We discussed various MS technologies and their community’s adoption as well as the way how each of us can be a part of the community activity. He also delivered excellent keynotes at the event. I must say that this is one of the most enjoyable keynotes I have ever attended. It was interesting and interactive, and I must say that I had the 70s feelings with all the fonts and graphics. I still remember him saying, “Yeah, I was a student and I know you.” Allen Tuladhar, David Lim, Pinal Dave and Guests After the keynote, everybody cheered when Allen came on stage to talk about the event and to introduce the agenda for the next two days. I must say that Allen is one of the most well-known people in Nepal. I was impressed with his popularity, and to prove this, when he got on the stage he had to wait for a long full minute before he was able to greet “Welcome” while the attendees were clapping and cheering. Technology Panelist at Techmela Kathmandu, Nepal This event was blessed with the top-of-the-top officials of various IT industries, Nepal ministries and the US Embassy. All the prominent personalities were present for panel discussion on the stage. The talk was done on various subjects. Also, the energy level which was set by Allen really echoed in the audience as they asked certain questions on different global as well local IT-related questions. The panel discussion really was discussion instead of usual monologue of one person. Pinal Dave presenting at TechMela Kathmandu, Nepal This was a two-day event and my session was on either of the day. I had a great participation from the audience on both days. The place where the event was organized had a capacity of around 500+ audience. Both of my sessions were heavily attended and volunteers did a fabulous job helping the attendees find empty seats or arrange some additional seats. I was overwhelmed with the interaction I have received in the large hall. Attendees were not so shy to express their thoughts, so both the sessions were followed up by top notch one-on-one conversations for a couple of hours. Pinal Dave presenting at TechMela Kathmandu, Nepal Pinal Dave presenting at TechMela Kathmandu, Nepal There are many questions that I have received during the event, and many of them can be interesting for all of us here so I will write detailed blog posts on these subjects. I also tried to participate in the gaming activities held at the event, but I felt I was kind of lost even if I was only playing for the very first minutes. This made me realize that I am really getting old for video games. Allen presenting at TechMela Kathmandu, Nepal Allen’s session on Digital Photography was very impressive as he demonstrated so many features of the Windows Live Product that at one point I felt he is MVP for Windows Live. In fact, he demonstrated how all the Microsoft products work together to give users an excellent desktop experience; no wonder he is an MVP for Windows Desktop Experience. Pinal Dave presending at TechMela Kathmandu, Nepal Any event has two common dilemmas – food and logistics. However, this event had excellent food and state-of-the-art organization. I was very glad that this two-day event turned out to be one of the most successful events in Nepal. I also noticed that almost all attendees rate their experience as beyond expectation and truly exceptional. Pinal Dave and Allen Bailochan Tuladhar If you ever get invited by Allen in any of his event, I strongly suggest that you drop all your plans and scheduled stuff, and accept his invitation. For sure, the event will be a very memorable one and would be your once-in-a-lifetime experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• Add Zune Desktop Player to Windows 7 Media Center

  - by DigitalGeekery

  Are you a Zune owner who prefers the Zune player for media playback? Today we’ll show you how to integrate the Zune player with WMC using Media Center Studio. You’ll need to download Media Center Studio and the Zune Desktop player software. (See download links below) Also, make sure you have Media Center closed. Some of the actions in Media Center Studio cannot be performed while WMC is open. Open Media Center Studio and click on the Start Menu tab at the top of the application.   Click the Application button. Here we will create an Entry Point for the Zune player so that we can add it to Media Center. Type in a name for your entry point in the title text box. This is the name that will appear under the tile when added to the Media Center start menu. Next, type in the path to the Zune player. By default this should be C:\Program Files\Zune\Zune.exe. Note: Be sure to use the original path, not a link to the desktop icon.   The Active image is the image that will appear on the tile in Media Center. If you wish to change the default image, click the Browse button and select a different image. Select Stop the currently playing media from the When launched do the following: dropdown list.  Otherwise, if you open Zune player from WMC while playing another form of media, that media will continue to play in the background.   Now we will choose a keystroke to use to exit the Zune player software and return to Media Center. Click on the the green plus (+) button. When prompted, press a key to use to the close the Zune player. Note: This may also work with your Media Center remote. You may want to set a keyboard keystroke as well as a button on your remote to close the program. You may not be able to set certain remote buttons to close the application. We found that the back arrow button worked well. You can also choose a keystroke to kill the program if desired. Be sure to save your work before exiting by clicking the Save button on the Home tab.   Next, select the Start Menu tab and click on the next to Entry points to reveal the available entry points. Find the Zune player tile in the Entry points area. We want to drag the tile out onto one of the menu strips on the start menu. We will drag ours onto the Extras Library strip. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. When you’ve dragged the tile over any of the green plus signs, the  red “Move” label will turn to a blue “Move to” label. Now you can drop the tile into position. Save your changes and then close Media Center Studio. When you open Media Center, you should see your Zune tile on the start menu. When you select the Zune tile in WMC, Media Center will be minimized and Zune player will be launched. Now you can enjoy your media through the Zune player. When you close Zune player with the previously assigned keystroke or by clicking the “X” at the top right, Windows Media Center will be re-opened. Conclusion We found the Zune player worked with two different Media Center remotes that we tested. It was a times a little tricky at times to tell where you were when navigating through the Zune software with a remote, but it did work. In addition to managing your music, the Zune player is a nice way to add podcasts to your Media Center setup. We should also mention that you don’t need to actually own a Zune to install and use the Zune player software. Media Center Studio works on both Vista and Windows 7. We covered Media Center Studio a bit more in depth in a previous post on customizing the Windows Media Center start menu. Are you new to Zune player? Familiarize yourself a bit more by checking out some of our earlier posts like how to update your Zune player, and experiencing your music a whole new way with Zune for PC.   Downloads Zune Desktop Player download Media Center Studio download Similar Articles Productive Geek Tips How To Rip a Music CD in Windows 7 Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Fixing When Windows Media Player Library Won’t Let You Add FilesBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

  Read the article

• New MySQL Cluster 7.3 Previews: Foreign Keys, NoSQL Node.js API and Auto-Tuned Clusters

  - by Mat Keep

  At this weeks MySQL Connect conference, Oracle previewed an exciting new wave of developments for MySQL Cluster, further extending its simplicity and flexibility by expanding the range of use-cases, adding new NoSQL options, and automating configuration. What’s new: Development Release 1: MySQL Cluster 7.3 with Foreign Keys Early Access “Labs” Preview: MySQL Cluster NoSQL API for Node.js Early Access “Labs” Preview: MySQL Cluster GUI-Based Auto-Installer In this blog, I'll introduce you to the features being previewed. Review the blogs listed below for more detail on each of the specific features discussed. Save the date!: A live webinar is scheduled for Thursday 25th October at 0900 Pacific Time / 1600UTC where we will discuss each of these enhancements in more detail. Registration will be open soon and published to the MySQL webinars page MySQL Cluster 7.3: Development Release 1 The first MySQL Cluster 7.3 Development Milestone Release (DMR) previews Foreign Keys, bringing powerful new functionality to MySQL Cluster while eliminating development complexity. Foreign Key support has been one of the most requested enhancements to MySQL Cluster – enabling users to simplify their data models and application logic – while extending the range of use-cases for both custom projects requiring referential integrity and packaged applications, such as eCommerce, CRM, CMS, etc. Implementation The Foreign Key functionality is implemented directly within the MySQL Cluster data nodes, allowing any client API accessing the cluster to benefit from them – whether they are SQL or one of the NoSQL interfaces (Memcached, C++, Java, JPA, HTTP/REST or the new Node.js API - discussed later.) The core referential actions defined in the SQL:2003 standard are implemented: CASCADE RESTRICT NO ACTION SET NULL In addition, the MySQL Cluster implementation supports the online adding and dropping of Foreign Keys, ensuring the Cluster continues to serve both read and write requests during the operation.  This represents a further enhancement to MySQL Cluster's support for on0line schema changes, ie adding and dropping indexes, adding columns, etc.  Read this blog for a demonstration of using Foreign Keys with MySQL Cluster.  Getting Started with MySQL Cluster 7.3 DMR1: Users can download either the source or binary and evaluate the MySQL Cluster 7.3 DMR with Foreign Keys now! (Select the Development Release tab). MySQL Cluster NoSQL API for Node.js Node.js is hot! In a little over 3 years, it has become one of the most popular environments for developing next generation web, cloud, mobile and social applications. Bringing JavaScript from the browser to the server, the design goal of Node.js is to build new real-time applications supporting millions of client connections, serviced by a single CPU core. Making it simple to further extend the flexibility and power of Node.js to the database layer, we are previewing the Node.js Javascript API for MySQL Cluster as an Early Access release, available for download now from http://labs.mysql.com/. Select the following build: MySQL-Cluster-NoSQL-Connector-for-Node-js Alternatively, you can clone the project at the MySQL GitHub page.  Implemented as a module for the V8 engine, the new API provides Node.js with a native, asynchronous JavaScript interface that can be used to both query and receive results sets directly from MySQL Cluster, without transformations to SQL. Figure 1: MySQL Cluster NoSQL API for Node.js enables end-to-end JavaScript development Rather than just presenting a simple interface to the database, the Node.js module integrates the MySQL Cluster native API library directly within the web application itself, enabling developers to seamlessly couple their high performance, distributed applications with a high performance, distributed, persistence layer delivering 99.999% availability. The new Node.js API joins a rich array of NoSQL interfaces available for MySQL Cluster. Whichever API is chosen for an application, SQL and NoSQL can be used concurrently across the same data set, providing the ultimate in developer flexibility.  Get started with MySQL Cluster NoSQL API for Node.js tutorial MySQL Cluster GUI-Based Auto-Installer Compatible with both MySQL Cluster 7.2 and 7.3, the Auto-Installer makes it simple for DevOps teams to quickly configure and provision highly optimized MySQL Cluster deployments – whether on-premise or in the cloud. Implemented with a standard HTML GUI and Python-based web server back-end, the Auto-Installer intelligently configures MySQL Cluster based on application requirements and auto-discovered hardware resources Figure 2: Automated Tuning and Configuration of MySQL Cluster Developed by the same engineering team responsible for the MySQL Cluster database, the installer provides standardized configurations that make it simple, quick and easy to build stable and high performance clustered environments. The auto-installer is previewed as an Early Access release, available for download now from http://labs.mysql.com/, by selecting the MySQL-Cluster-Auto-Installer build. You can read more about getting started with the MySQL Cluster auto-installer here. Watch the YouTube video for a demonstration of using the MySQL Cluster auto-installer Getting Started with MySQL Cluster If you are new to MySQL Cluster, the Getting Started guide will walk you through installing an evaluation cluster on a singe host (these guides reflect MySQL Cluster 7.2, but apply equally well to 7.3 and the Early Access previews). Or use the new MySQL Cluster Auto-Installer! Download the Guide to Scaling Web Databases with MySQL Cluster (to learn more about its architecture, design and ideal use-cases). Post any questions to the MySQL Cluster forum where our Engineering team and the MySQL Cluster community will attempt to assist you. Post any bugs you find to the MySQL bug tracking system (select MySQL Cluster from the Category drop-down menu) And if you have any feedback, please post them to the Comments section here or in the blogs referenced in this article. Summary MySQL Cluster 7.2 is the GA, production-ready release of MySQL Cluster. The first Development Release of MySQL Cluster 7.3 and the Early Access previews give you the opportunity to preview and evaluate future developments in the MySQL Cluster database, and we are very excited to be able to share that with you. Let us know how you get along with MySQL Cluster 7.3, and other features that you want to see in future releases, by using the comments of this blog.

  Read the article

• Adobe Photoshop Vs Lightroom Vs Aperture

  - by Aditi

  Adobe Photoshop is the standard choice for photographers, graphic artists and Web designers. Adobe Photoshop Lightroom  & Apple’s Aperture are also in the same league but the usage is vastly different. Although Photoshop is most popular & widely used by photographers, but in many ways it’s less relevant to photographers than ever before. As Lightroom & Aperture is aimed squarely at photographers for photo-processing. With this write up we are going to help you choose what is right for you and why. Adobe Photoshop Adobe Photoshop is the most liked tool for the detailed photo editing & designing work. Photoshop provides great features for rollover and Image slicing. Adobe Photoshop includes comprehensive optimization features for producing the highest quality Web graphics with the smallest possible file sizes. You can also create startling animations with it. Designers & Editors know how important precise masking is, PhotoShop lets you do that with various detailing tools. Art history brush, contact sheets, and history palette are some of the smart features, which add to its viability. Download Whether you’re producing printed pages or moving images, you can work more efficiently and produce better results because of its smooth integration across other adobe applications. Buy supporting layer effects, it allows you to quickly add drop shadows, inner and outer glows, bevels, and embossing to layers. It also provides Seamless Web Graphics Workflow. Photoshop is hands-down the BEST for editing. Photoshop Cons: • Slower, less precise editing features in Bridge • Processing lots of images requires actions and can be slower than exporting images from Lightroom • Much slower with editing and processing a large number of images Aperture Apple Aperture is aimed at the professional photographer who shoots predominantly raw files. It helps them to manage their workflow and perform their initial Raw conversion in a better way. Aperture provides adjustment tools such as Histogram to modify color and white balance, but most of the editing of photos is left for Photoshop. It gives users the option of seeing their photographs laid out like slides or negatives on a light table. It boasts of – stars, color-coding and easy techniques for filtering and picking images. Aperture has moved forward few steps than Photoshop, but most of the editing work has been left for Photoshop as it features seamless Photoshop integration. Aperture Pros: Aperture is a step up from the iPhoto software that comes with every Mac, and fairly easy to learn. Adjustments are made in a logical order from top to bottom of the menu. You can store the images in a library or any folder you choose. Aperture also works really well with direct Canon files. It is just $79 if you buy it through Apple’s App Store Moving forward, it will run on the iPad, and possibly the iPhone – Adobe products like Lightroom and Photoshop may never offer these options It is much nicer and simpler user interface. Lightroom Lightroom does a smashing job of basic fixing and editing. It is more advanced tool for photographers. They can use it to have a startling photography effect. Light room has many advanced features, which makes it one of the best tools for photographers and far ahead of the other two. They are Nondestructive editing. Nothing is actually changed in an image until the photo is exported. Better controls over organizing your photos. Lightroom helps to gather a group of photos to use in a slideshow. Lightroom has larger Compare and Survey views of images. Quickly customizable interface. Simple keystrokes allow you to perform different All Lightroom controls are kept available in panels right next to the photos. Always-available History palette, it doesn’t go when you close lightroom. You gain more colors to work with compared to Photoshop and with more precise control. Local control, or adjusting small parts of a photo without affecting anything else, has long been an important part of photography. In Lightroom 2, you can darken, lighten, and affect color and change sharpness and other aspects of specific areas in the photo simply by brushing your cursor across the areas. Photoshop has far more power in its Cloning and Healing Brush tools than Lightroom, but Lightroom offers simple cloning and healing that’s nondestructive. Lightroom supports the RAW formats of more cameras than Aperture. Lightroom provides the option of storing images outside the application in the file system. It costs less than photoshop. Download Why PhotoShop is advanced than Lightroom? There are countless image processing plug-ins on the market for doing specialized processing in Photoshop. For example, if your image needs sophisticated noise reduction, you can use the Noiseware plug-in with Photoshop to do a much better job or noise removal than Lightroom can do. Lightroom’s advantages over Aperture 3 Will always have better integration with Photoshop. Lightroom is backed by bigger and more active user community (So abundant availability for tutorials, etc.) Better noise reduction tool. Especially for photographers the Lens-distortion correction tool  is perfect Lightroom Cons: • Have to Import images to work on them • Slows down with over 10,000 images in the catalog • For processing just one or two images this is a slower workflow Photoshop Pros: • ACR has the same RAW processing controls as Lightroom • ACR Histogram is specialized to the chosen color space (Lightroom is locked into ProPhoto RGB color space with an sRGB tone curve) • Don’t have to Import images to open in Bridge or ACR • Ability to customize processing of RAW images with Photoshop Actions Pricing and Availability Get LightRoomGet PhotoShop Latest version Of Photoshop can be purchased from Adobe store and Adobe authorized reseller and it costs US$999. Latest version of Aperture can be bought for US$199 from Apple Online store or Mac App Store. You can buy latest version of LightRoom from Adobe Store or Adobe Authorized reseller for US$299. Related posts:Adobe Photoshop CS5 vs Photoshop CS5 extended Web based Alternatives to Photoshop 10 Free Alternatives for Adobe Photoshop Software

  Read the article

• Professional WordPress Business Themes

  - by Matt

  Every now and then JustSkins.com receives quote requests for WordPress design for business websites. Most companies now keep up to date with a blog on their corporate website, that showcases their day to day activities & progresses.  Getting such professional wordpress driven website designed from the scratch costs you a lot. If you have decided to make WordPress the CMS for your business website, there are some Professional WordPress themes you can take a look at. We have created this list to help you save some time to do all the trying and the testing. Optimize by WooThemes Last year one of the most popular Business theme by WooThemes was the Coffee Break theme, Optimize is further adaptation of the same. It is simple, sleek design with great functionality. The customizable front page lets you showcase your work or product etc. Demo | Price: $70, Developer Price: $150 | DOWNLOAD WooThemes is also offering their whole Business theme pack for a very very reasonable fee, If you like multiple designs from them you can get this big deal for only $125 Onyx , Impacto by Simple Themes Simple Themes has been making very crisp & beautiful WordPress Themes & are also very reasonably priced. If their themes solve your purpose $39 membership for 3 months is a good deal.  If you are looking to create quick website, landing page or micro site their templates are best. Demo | Price: $39 for 3 Months Membership Rejuvenate by Templatic One of the most beautiful Premium WordPress Theme, Available in 4 elegant color schemes. This theme can be used for your Beauty, Spa and Studio Business. Demo | Price: $65  | DOWNLOAD Templatic has created great professional business templates, such as Gourmet, Real Estate, Job Board, Automobile & lots More. You can also get a Best Value Offer in $299 for all of Templatic Themes. TheProfessional by ElegantThemes Elegant Themes is known to provide very beautiful & straightforward designs. The professional wordpress theme is a simple, crisp & concise Theme you can use to create a business website. The 3 short blurbs on the homepage are simple, which can be used to point them to your major offerings and the prominent slider indicates a clear call to action. There are 52 themes to choose from & Elegant Themes is giving a great offer at such a small yearly fee. Demo | Price: $39 Yearly Membership  | DOWNLOAD Elegant Themes has a cluster of 52 magnificent themes, and all you have to do is pay $39 to win access to all of them. Join today! Some of the Professional designs that I like for a business website are SimplePress and Corporation. Extatic by Chimera Themes The theme includes plenty of great features including custom feature tour pages, portfolio sections, static feature areas, pricing table page, 20+ shortcodes, multiple page/post options, unlimited custom sidebars which can be assigned to posts/pages, advanced theme style editor and options page and much more. Its a must buy Demo | Price: $37 | DOWNLOAD Corporate by Clover Themes Simple Theme for a small business. Corporate is an clean, powerful and feature-rich corporate theme with dynamic and energy design. Demo | Price: $69.95 | DOWNLOAD Bizco by Themify Bizco is a very professional template for wordpress targeted at corporate and product based businesses. This theme is simple yet highly functional and is suitable for showcasing features of your service or product. With the custom page template you can change the display of your pages and posts easily with our visual custom panel. Demo | Price: $70  |DOWNLOAD Devision by Themetrust Devision is a small business wordpress theme that can be used to make a business website within a few minutes. It makes it very easy to showcase and highlight your services or product on the homepage. Demo | Price: Euro 39 | DOWNLOAD BizPress by WPZoom A professional business WordPress theme from WPZoom suitable for companies, organizations, product showcases or other business websites. The theme comes with 4 colour options, featured products / services slider on the homepage, drop down menus, theme options page etc. Demo | Price: $ 69 | DOWNLOAD Clean Classy Corporate by ThemeFuse A very impressive WordPress business theme, that can be used in multiple ways. It is suitable for many kinds, like web products, services, hosting etc etc. Clean Classy Corporate WordPress Theme has a clean crisp look and is professional in appeal. Demo | Price: $49  | DOWNLOAD Insdustry by ThemeJam A powerful Business WordPress Template along with lots of options, colors, and customizable features. This is one for almost any kind of blogger, corporate, or organization. Lots of features, gives it the kind of scalability you might need to create any kind of website. Demo | Price: $ 59 | DOWNLOAD AppPress by ChimeraThemes This professional business WordPress theme includes 5 different colour schemes, advanced theme options page, multiple homepage sliders, custom widgets and page templates. The theme also includes a range of other unique features such as custom title, live style editor to modify colours, font styles, sizes etc, and 20+ shortcodes for creating pricing tables, content columns, boxes, buttons and others. Demo | Price: $ 37 | DOWNLOAD Why WordPress Professional Template? You can modify them, these usually come with a lot of fancy features that enable you to create the website as per your usability & choice. In some cases the  Premium WordPress business themes can be accessed through a subscription service. Premium Vs Free WordPress Themes There are very good Free WordPress themes out there that you can use to modify and code further or create what you want, but this possible when you are technically able. On the contrary Premium WordPress business themes offers great features & can save you a lot of time and money. It varies from business to business, some like to keep their website simple while most want to keep cool nifty features and abilities to scale it differently for various sections, products or categories. All this & more is possible with a Professional Business theme that is suitable/close to your needs.

  Read the article

• UCM 11g is 4 days old!

  - by kyle.hatlestad

  Ok...so I missed posting a blog entry when UCM 11g and the entire ECM suite released on Tuesday. Hopefully you've already seen the announcements on any number of the Oracle ECM blogs out there such as ECM Alerts, Fusion ECM, bex huff, or C4. So I won't bore you with the same talking points like 179 million check-ins per day or 124 web site page hits per second. Instead, I thought I'd show some screenshots of the new features in UCM and URM 11g. WebLogic Server and Enterprise Manager So probably the biggest change in 11g is UCM and URM now run on top of the WebLogic Server application server. This is a huge step as ECM is now on a standard platform with the rest of Oracle Fusion Middleware which makes installation, configuration, and integration consistent among all the products. From a feature perspective, it's also beneficial because it's now integrated with Oracle Enterprise Manager. Enterprise Manager provides a lot of provisioning control over servers as well as performance monitoring and access to logs and debugging information. Desktop Integration Suite Desktop Integration Suite got a complete overhaul for 11g. It exposes a lot more features within Windows Explorer such as saved searches, workflow queue, and checked-out items. It also now support metadata pop-up screens to let users fill in additional metadata when they drag-n-drop files in! And the integration within Office applications has changed significantly by introducing a dedicated UCM menu to do open, save, compare, etc. Site Studio for External Applications In UCM Site Studio 10gR4, a major architectural shift was introduced which brought several new objects such as elements, region definitions, region templates, and placeholder definitions. This truly separated the content from the display and from the definition. It also allowed separation of the content from needing to be rendered on a complete Site Studio page. Well, the new Site Studio for External Applications takes advantage of that architecture and introduces pre-built tags and plug-ins to JDeveloper to allow to go from simply adding a content area to your web application page to building an entire web site, just like you would have done in Site Studio Designer. In addition to these changes, enhancements to the core Site Studio have been added as well. One of the big ones is called Designer Mode which allows power-users to bypass the standard rules defined by the placeholder definition or template and perform any number of additional actions. This reduces the need to go back to Site Studio Designer or JDeveloper to make more advanced changes to the site. Dashboards As part of the updated records management functionality in both UCM and URM, users can now set a dashboard view on their home page to surface common functions in a single view. It has pre-built "portlets" users can choose from to display and organize they way they want. Behind the scenes, these dashboards are stored as Content Folios. So the dashboards themselves are content items that can be revisioned and shared between users. And new dashboard portlets can be easily added (like the User Profile one in the screenshots) by getting a copy of an existing one, modifying the display, and then checking it in as a new one to select from. URM Interface Enhancements URM includes several new UI and usability enhancements in 11g. There is a new view for physical records, a place to configure "favorite" items to quickly get to, and new placement of the records management menu. BI Publisher Reports Records management in UCM and URM now offer reports generated through embedded BI Publisher. Templates are controlled by rich text files checked directly into the repository, so they can be easily modified. Other Features A new Inbound Refinery conversion option is available that does native Microsoft Office HTML conversion. If your IBR is on Windows and you have the native applications loaded, the IBR can use them to produce HTML. A new GUI template editor for Dynamic Converter is available. It's written in Java so is available through all the supported browsers and platforms. The original ActiveX based editor is also still available. The Component Manager interface has changed to help provide an easier and more descriptive way to enable core components that are installed along with UCM. All of the supported components are immediately available to turn on and do not have to be installed separately as in previous versions. My Downloads is located in the My Content Server menu and provides for easy download of client installs including Desktop Integration Suite and Site Studio Designer. Well, hopefully that gives you a taste for some of the new things in 11g. We're all pretty excited here at Oracle about all the new changes and enhancements. Over the next few months I hope to highlight some of these features more in-depth, so keep your eye out for those posts.

  Read the article

• WPF ListView as a DataGrid – Part 3

  - by psheriff

  I have had a lot of great feedback on the blog post about turning the ListView into a DataGrid by creating GridViewColumn objects on the fly. So, in the last 2 parts, I showed a couple of different methods for accomplishing this. Let’s now look at one more and that is use Reflection to extract the properties from a Product, Customer, or Employee object to create the columns. Yes, Reflection is a slower approach, but you could create the columns one time then cache the View object for re-use. Another potential drawback is you may have columns in your object that you do not wish to display on your ListView. But, just because so many people asked, here is how to accomplish this using Reflection.   Figure 1: Use Reflection to create GridViewColumns. Using Reflection to gather property names is actually quite simple. First you need to pass any type (Product, Customer, Employee, etc.) to a method like I did in my last two blog posts on this subject. Below is the method that I created in the WPFListViewCommon class that now uses reflection. C#public static GridView CreateGridViewColumns(Type anyType){  // Create the GridView  GridView gv = new GridView();  GridViewColumn gvc;   // Get the public properties.  PropertyInfo[] propInfo =          anyType.GetProperties(BindingFlags.Public |                                BindingFlags.Instance);   foreach (PropertyInfo item in propInfo)  {    gvc = new GridViewColumn();    gvc.DisplayMemberBinding = new Binding(item.Name);    gvc.Header = item.Name;    gvc.Width = Double.NaN;    gv.Columns.Add(gvc);  }   return gv;} VB.NETPublic Shared Function CreateGridViewColumns( _  ByVal anyType As Type) As GridView  ' Create the GridView   Dim gv As New GridView()  Dim gvc As GridViewColumn   ' Get the public properties.   Dim propInfo As PropertyInfo() = _    anyType.GetProperties(BindingFlags.Public Or _                          BindingFlags.Instance)   For Each item As PropertyInfo In propInfo    gvc = New GridViewColumn()    gvc.DisplayMemberBinding = New Binding(item.Name)    gvc.Header = item.Name    gvc.Width = [Double].NaN    gv.Columns.Add(gvc)  Next   Return gvEnd Function The key to using Relection is using the GetProperties method on the type you pass in. When you pass in a Product object as Type, you can now use the GetProperties method and specify, via flags, which properties you wish to return. In the code that I wrote, I am just retrieving the Public properties and only those that are Instance properties. I do not want any static/Shared properties or private properties. GetProperties returns an array of PropertyInfo objects. You can loop through this array and build your GridViewColumn objects by reading the Name property from the PropertyInfo object. Build the Product Screen To populate the ListView shown in Figure 1, you might write code like the following: C#private void CollectionSample(){  Product prod = new Product();   // Setup the GridView Columns  lstData.View =      WPFListViewCommon.CreateGridViewColumns(typeOf(Product));  lstData.DataContext = prod.GetProducts();} VB.NETPrivate Sub CollectionSample()  Dim prod As New Product()   ' Setup the GridView Columns  lstData.View = WPFListViewCommon.CreateGridViewColumns( _       GetType(Product))  lstData.DataContext = prod.GetProducts()End Sub All you need to do now is to pass in a Type object from your Product class that you can get by using the typeOf() function in C# or the GetType() function in VB. That’s all there is to it! Summary There are so many different ways to approach the same problem in programming. That is what makes programming so much fun! In this blog post I showed you how to create ListView columns on the fly using Reflection. This gives you a lot of flexibility without having to write extra code as was done previously. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "WPF ListView as a DataGrid – Part 3" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".  

  Read the article

• Change the User Interface Language in Ubuntu

  - by Matthew Guay

  Would you like to use your Ubuntu computer in another language?  Here’s how you can easily change your interface language in Ubuntu. Ubuntu’s default install only includes a couple languages, but it makes it easy to find and add a new interface language to your computer.  To get started, open the System menu, select Administration, and then click Language Support. Ubuntu may ask if you want to update or add components to your current default language when you first open the dialog.  Click Install to go ahead and install the additional components, or you can click Remind Me Later to wait as these will be installed automatically when you add a new language. Now we’re ready to find and add an interface language to Ubuntu.  Click Install / Remove Languages to add the language you want. Find the language you want in the list, and click the check box to install it.  Ubuntu will show you all the components it will install for the language; this often includes spellchecking files for OpenOffice as well.  Once you’ve made your selection, click Apply Changes to install your new language.  Make sure you’re connected to the internet, as Ubuntu will have to download the additional components you’ve selected. Enter your system password when prompted, and then Ubuntu will download the needed languages files and install them.   Back in the main Language & Text dialog, we’re now ready to set our new language as default.  Find your new language in the list, and then click and drag it to the top of the list. Notice that Thai is the first language listed, and English is the second.  This will make Thai the default language for menus and windows in this account.  The tooltip reminds us that this setting does not effect system settings like currency or date formats. To change these, select the Text Tab and pick your new language from the drop-down menu.  You can preview the changes in the bottom Example box. The changes we just made will only affect this user account; the login screen and startup will not be affected.  If you wish to change the language in the startup and login screens also, click Apply System-Wide in both dialogs.  Other user accounts will still retain their original language settings; if you wish to change them, you must do it from those accounts. Once you have your new language settings all set, you’ll need to log out of your account and log back in to see your new interface language.  When you re-login, Ubuntu may ask you if you want to update your user folders’ names to your new language.  For example, here Ubuntu is asking if we want to change our folders to their Thai equivalents.  If you wish to do so, click Update or its equivalents in your language. Now your interface will be almost completely translated into your new language.  As you can see here, applications with generic names are translated to Thai but ones with specific names like Shutter keep their original name. Even the help dialogs are translated, which makes it easy for users around to world to get started with Ubuntu.  Once again, you may notice some things that are still in English, but almost everything is translated. Adding a new interface language doesn’t add the new language to your keyboard, so you’ll still need to set that up.  Check out our article on adding languages to your keyboard to get this setup. If you wish to revert to your original language or switch to another new language, simply repeat the above steps, this time dragging your original or new language to the top instead of the one you chose previously. Conclusion Ubuntu has a large number of supported interface languages to make it user-friendly to people around the globe.  And since you can set the language for each user account, it’s easy for multi-lingual individuals to share the same computer. Or, if you’re using Windows, check out our article on how you can Change the User Interface Language in Vista or Windows 7, too! Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyChange the User Interface Language in Vista or Windows 7Create a Samba User on UbuntuInstall Samba Server on UbuntuSee Which Groups Your Linux User Belongs To TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED

  Read the article

• Connecting to DB2 from SSIS

  - by Christopher House

  The project I'm currently working on involves moving various pieces of data from a legacy DB2 environment to some SQL Server and flat file locations.  Most of the data flows are real time, so they were a natural fit for the client's MQSeries on their iSeries servers and BizTalk to handle the messaging.  Some of the data flows, however, are daily batch type transmissions.  For the daily batch transmissions, it was decided that we'd use SSIS to pull the data direct from DB2 to either a SQL Server or flat file.  I'm not at all an SSIS guy, I've done a bit here and there, but mainly for situations were we needed to move data from a dev environment to QA, mostly informal stuff like that.  And, as much as I'm not an SSIS guy, I'm even less a DB2/iSeries guy.  Prior to this engagement, my knowledge of DB2 was limited to the fact that it's an IBM product and that it was probably a DBMS flatform (that's what the DB in DB2 means, right?).   One of my first goals when I came onto this project was to develop of POC SSIS package to pull some data from DB2 and dump it to a flat file.  It sounded like a pretty straight forward task.  As always, the devil is in the details.  Configuring the DB2 connection manager took a bit of trial and error.  As such, I thought I'd post my experiences here in hopes that they might save someone the efforts I went through.  That being said, please keep in mind, as I pointed out, I'm not at all a DB2 guy, so my terminology and explanations may not be 100% spot on. Before you get started, you need to figure out how you're going to connect to DB2.  From the research I did, it looks like there are a few options.  IBM has both an OLE DB and .Net data provider which can be found here.  I installed their client access tools and tried to use both the .Net and OLE DB providers but I received an error message from both when attempting to connect to the iSeries that indicated I needed a license for a product called DB2 Connect.  I inquired with one of my client's iSeries resources about a license for this product and it appears they didn't have one, so that meant the IBM drivers were out.  The other option that I found quite a bit of discussion around was Microsoft's OLE DB Provider for DB2.  This driver is part of the feature pack for SQL Server 2008 Enterprise Edition and can be downloaded here. As it turns out, I already had Microsoft's driver installed on my dev VM, which stuck me as odd since I hadn't installed it.  I discovered that the driver is installed with the BizTalk adapter pack for host systems, which was also installed on my VM.  However, it looks like the version used by the adapter pack is newer than the version provided in the SQL Server feature pack.   Once you get the driver installed, create a connection manager in your package just like you normally would and select the Microsoft OLE DB Provider for DB2 from the list of available drivers. After you select the driver, you'll need to enter in your host name, login credentials and initial catalog. A couple of things to note here.  First, the Initial catalog needs to be the same as your host name.  Not sure why that is, but trust me, it just does.  Second, for credentials, in my environment, we're using what the client's iSeries people refer to as "profiles".  I guess this is similar to SQL auth in the SQL Server world.  In other words, they've given me a username and password for connecting to DB, so I've entered it here. Next, click the Data Links button.  On the Data Links screen, enter your package collection on the first tab. Package collection is one of those DB2 concepts I'm still trying to figure out.  From the little bit I've read, packages are used to control SQL compilation and each DB2 connection needs one.  The package collection, I believe, controls where your package is created.  One of the iSeries folks I've been working with told me that I should always use QGPL for my package collection, as QGPL is "general purpose" and doesn't require any additional authority. Next click the ellipsis next to the Network drop-down.  Here you'll want to enter your host name again. Again, not sure why you need to do this, but trust me, my connection wouldn't work until I entered my hostname here. Finally, go to the Advanced tab, select your DBMS platform and check Process binary as character. My environment is DB2 on the iSeries and iSeries is the replacement for AS/400, so I selected DB2/AS400 for my platform.  Process binary as character was necessary to handle some of the DB2 data types.  I had a few columns that showed all their data as "System.Byte[]".  Checking Process binary as character resolved this. At this point, you should be good to go.  You can go back to the Connection tab on the Data Links dialog to perform a couple of tests to validate your configuration.  The Test Connection button is obvious, this just verifies you can connect to the host using the configuration data you've entered.  The Packages button will attempt to connect to the host and create the packages required to execute queries. This isn't meant to be a comprehensive look SSIS and DB2, these are just some of the notes I've come up with since I've started working with DB2 and SSIS.  I'm sure as I continue developing my packages, I'll find more quirks and will post them here.

  Read the article

• 6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’

  - by Gopinath

  Humans quest for exploring the surrounding planets to see whether we can live there or not is taking new shape today. NASA’s Mars probing robot, Curiosity, blasted off today on its 9 months journey to reach Mars and explore it for the possibilities of life there. Scientist says that Curiosity is one most advanced rover ever launched to probe life on other planets. Here is the launch video and some analysis by a news reporter Lets look at the 6 interesting facts about the mission 1. It’s as big as a car Curiosity is the biggest ever rover ever launched by NASA to probe life on outer planets. It’s as big as a car and almost double the size of its predecessor rover Spirit. The length of Curiosity is around 9 feet 10 inches(3 meters), width is 9 feet 1 inch (2.8 meters) and height is 7 feet (2.1 meters). 2. Powered by Plutonium – Lasts 24×7 for 23 months The earlier missions of NASA to explore Mars are powered by Solar power and that hindered capabilities of the rovers to move around when the Sun is hiding. Due to dependency of Sun the earlier rovers were not able to traverse the places where there is no Sun light. Curiosity on the other hand is equipped with a radioisotope power system that generates electricity from the heat emitted by plutonium’s radioactive decay. The plutonium weighs around 10 pounds and can generate power required for operating the rover close to 23 weeks. The best part of the new power system is, Curiosity can roam around in darkness, light and all year around. 3. Rocket powered backpack for a science fiction style landing The Curiosity is so heavy that NASA could not use parachute and balloons to air-drop the rover on the surface of Mars like it’s previous missions. They are trying out a new science fiction style air-dropping mechanism that is similar to sky crane heavy-lift helicopter. The landing of the rover begins first with entry into the Mars atmosphere protected by a heat shield. At about 6 miles to the surface, the heat shield is jettisoned and a parachute is deployed to glide the rover smoothly. When the rover touches 3 miles above the surface, the parachute is jettisoned and the eight motors rocket backpack is used for a smooth and impact free landing as shown in the image. Here is an animation created by NASA on the landing sequence. If you are interested in getting more detailed information about the landing process check this landing sequence picture available on NASA website 4. Equipped with Star Wars style laser gun Hollywood movie directors and novelist always imagined aliens coming to earth with spaceships full of laser guns and blasting the objects which comes on their way. With Curiosity the equations are going to change. It has a powerful laser gun equipped in one of it’s arms to beam laser on rocks to vaporize them. This is not part of any assault mission Curiosity is expected to carry out, the laser gun is will be used to carry out experiments to detect life and understand nature. 5. Most sophisticated laboratory powered by 10 instruments Around 10 state of art instruments are part of Curiosity rover and the these 10 instruments form a most advanced rover based lab ever built by NASA. There are instruments to cut through rocks to examine them and other instruments will search for organic compounds. Mounted cameras can study targets from a distance, arm mounted instruments can study the targets they touch. Microscopic lens attached to the arm can see and magnify tiny objects as tiny as 12.5 micro meters. 6. Rover Carrying 1.24 million names etched on silicon Early June 2009 NASA launched a campaign called “Send Your Name to Mars” and around 1.24 million people registered their names through NASA’s website. All those 1.24 million names are etched on Silicon chips mounted onto Curiosity’s deck. If you had registered your name in the campaign may be your name is going to reach Mars soon. Curiosity On Web If you wish to follow the mission here are few links to help you NASA’s Curiosity Web Page Follow Curiosity on Facebook Follow @MarsCuriosity on Twitter Artistic Gallery Image of Mars Rover Curiosity A printable sheet of Curiosity Mission [pdf] Images credit: NASA This article titled,6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Feedback on "market manipulation", a peripheral game mechanic for a satirical MMO

  - by BerndBrot

  This question asks for feedback on a specific game-mechanic. Since there is not one right feedback on a game mechanic, I tried to provide enough context and guidelines to still make it possible for users to rate answers and to accept an answer as the best answer (following these criteria from Writer.SE's meta website). Please comment if you have any suggestions on how I could improve the question in that regard. So, let's begin with the game itself and some of its elements which are relevant for this question. Context I'm working on a satirical, text-based multiplayer adventure and role-playing game set in modern-day London. The game resolves around the concept of sin and features a myriad of (venomous) allusions to all the things that go wrong in this world. Players can choose between character classes like bullshit artist (consultant), bankster, lawyer, mobster, celebrity, politician, etc. In order to complete the game, the player has to live so sinfully with regard to any of the seven deadly sins that a demon is willing to offer them a contract of sponsorship. On their quest to live a sinful live, characters explore more and more locations of modern-day London (on a GoogleMap), fight "monsters" like insurance sales agents or Jehovah's Witnesses, and complete quests, like building a PowerPoint presentation out of marketing buzz words or keeping up a number of substance abuse effects in order to progress on the gluttony path. Battles are turn based with both combatants having a deck of cards, with which they try to make their enemy give in to temptations of all sorts. Tempted enemies sometimes become contacts (an item drop mechanic), which can be exploited for various benefits, depending on their area of influence (finance, underworld, bureaucracy, etc.), level of influence, and kind of sway that the player has over them (bribed, seduced, threatened, etc.) Once a contract has been exploited, the player loses that contact. Most actions require turns. Turns are limited, but refill each day. Criteria A number of peripheral game mechanics are supposed to represent real world abuses and mischief in a humorous way integrate real world data and events to strengthen the feeling of relevance of the game's humor with regard to real world problems add fun ways of interacting with other players add ways for players to express themselves through game-play Market manipulation is one such peripheral game mechanic and should fulfill all of these goals. Market manipulation This is my initial design of the mechanic: Players can enter the London Stock Exchange (LSE) (without paying a turn) LSE displays the stock prices of a number of companies in industries like weapons or tobacco as well as some derivatives based on wheat and corn. The stock prices are calculated based on the actual stock prices of these companies and derivatives (in real time) any market manipulations that were conducted by the players any market corrections of the system Players can buy and sell shares with cash, a resource in the game, at current in-game market value (without paying a turn). Players can manipulate the market, i.e. let the price of a share either rise or fall, by some amount, over a certain period of time. Manipulating the market requires 1 turn A contact in the financial sector (see above). The higher the level of influence of the contact, the stronger the effect of the manipulation on the stock price, and/or the shorter it takes for the manipulation to manifest itself. Market manipulation also adds a crime to the player's record. (There are a multitude of ways to take care of that, but it is still another "cost" of market manipulations.) The system continuously corrects market manipulations by letting the in-game prices converge towards their real world counterparts at a rate of 2% of the difference between the two per hour. Because of this market correction mechanism, pushing up prices (and screwing down prices) becomes increasingly difficult the higher (lower) the price already is. Whenever food prices reach a certain level, in-game stories are posted about hunger catastrophes happening somewhere far, far away (maybe with links to real world news stories). Whenever a player sells a certain number of shares with a sufficiently high margin, they are mentioned in that day's in-game financial news. Since the number of stock options is very limited, players will inevitably collide in their efforts to manipulate the market in their favor. Hopefully, it will also be a fun side-arena for guilds and covenants to fight each other. Question(s) What do you think of this mechanism given the criteria for peripheral game mechanics that I specified for my game? Do you have any ideas how the mechanic could be improved with regard to these criteria (or otherwise)? Could it be improved to allow for more expressive game-play, or involve an allusion to some other real world madness (like short selling, leveraging, or some other banking magic)? Are there any game-theoretic problems with this mechanic, like maybe certain dominant individual strategies that, collectively, lead to every player profiting and thus eliminating the idea of market manipulation PVP? Also, if you like (or dislike) this question, feel free to participate in the discussion on GDSE meta: "Should we be more lax with regard to SE's question/answer format to make game design questions possible?"

  Read the article

• Using Oracle ADF Data Visualization Tools (DVT) Line Graphs to Display Weather Information

  - by Christian David Straub

  OverviewA guest post by Jeanne Waldman.I have a simple JDeveloper Fusion application that retrieves weather data. I wanted to compare the week's temperatures of different locations in a graph. I decided to check out the dvt:lineGraph component, and it took me a few minutes to add it to my jspx page and supply it with data.Drag and Drop the dvt:lineGraph onto your pageI opened my .jspx page in design modeIn the Component Palette, I selected ADF Data Visualization.Then I dragged 'Line' onto my page.A dialog popped up giving me options of the type of line graph. I chose the default.A lineGraph displayed with some default data. Hook up your weather dataNow I wanted to hook up my own data. I browsed the tagdoc, and I found the tabularData attribute.Attribute: tabularDataType: java.util.ListTagDoc:Specifies a list of data that the graph uses to create a grid and populate itself. The List consists of a three-member Object array for each data value to be passed to the graph. The members of each array must be organized as follows: The first member (index 0) is the column label, in the grid, of the data value. This is generally a String. If the graph has a time axis, then this should be a Java Date. Column labels typically identify groups in the graph. The second member (index 1) is the row label, in the grid, of the data value. This is generally a String. Row labels appear as series labels in the graph (usually in the legend). The third member (index 2) is the data value, which is usually a Double.The first member is the column label of the data value. This would be the day of the week.The second member is the row label of the data value. This would be the location name.The third member is the data value, usually a Double. This would be the temperature. I already had all this information, I just needed to put it in a List with a three-member Object array for each data value.   /**    * This is used for the lineGraph to show the data for each location.    */   public List<Object[]> getTabularData()   {      List<Object[]> tabularData = new ArrayList<Object []>();      List<WeatherForecast> weatherForecastList = getWeatherForecastList();      // loop through the list and build up the tabular data. Then cache it.      for(WeatherForecast wf : weatherForecastList)      {        List<ForecastDay> forecastDayList = wf.getForecastDayList();        String location = wf.getLocation();        for (ForecastDay fday : forecastDayList)        {          String day = fday.getPrettyDate();          String highTemp = fday.getHighF();          tabularData.add(new Object[]{day, location, Double.valueOf(highTemp)});        }             }      return tabularData;    }  Now I bound the lineGraph to this method by setting tabularData to#{weatherForAllLocationsBean.tabularData}weatherForAllLocationsBean is my bean that is defined in faces-config.xml. Adding a barGraphIn about 30 seconds, I added a barGraph with the same data. I dragged and dropped a bar graph onto the page, used the same tabularData as I did in the line graph. The page looks like this:  ConclusionI was very happy how fast it was to hook up my weather data to these graphs. They look great, and they have built in functionality. For instance, I can hide/show a location by clicking on the name of the location in the legend.

  Read the article

• How To Replace Notepad in Windows 7

  - by Trevor Bekolay

  It used to be that Notepad was a necessary evil because it started up quickly and let us catch a quick glimpse of plain text files. Now, there are a bevy of capable Notepad replacements that are just as fast, but also have great feature sets. Before following the rest of this how-to, ensure that you’re logged into an account with Administrator access. Note: The following instructions involve modifying some Windows system folders. Don’t mess anything up while you’re in there! If you follow our instructions closely, you’ll be fine. Choose your replacement There are a ton of great Notepad replacements, including Notepad2, Metapad, and Notepad++. The best one for you will depend on what types of text files you open and what you do with them. We’re going to use Notepad++ in this how-to. The first step is to find the executable file that you’ll replace Notepad with. Usually this will be the only file with the .exe file extension in the folder where you installed your text editor. Copy the executable file to your desktop and try to open it, to make sure that it works when opened from a different folder. In the Notepad++ case, a special little .exe file is available for the explicit purpose of replacing Notepad.If we run it from the desktop, it opens up Notepad++ in all its glory. Back up Notepad You will probably never go back once you switch, but you never know. You can backup Notepad to a special location if you’d like, but we find it’s easiest to just keep a backed up copy of Notepad in the folders it was originally located. In Windows 7, Notepad resides in: C:\Windows C:\Windows\System32 C:\Windows\SysWOW64 in 64-bit versions only Navigate to each of those directories and copy Notepad. Paste it into the same folder. If prompted, choose to Copy, but keep both files. You can keep your backup as “notepad (2).exe”, but we prefer to rename it to “notepad.exe.bak”. Do this for all of the folders that have Notepad (2 total for 32-bit Windows 7, 3 total for 64-bit). Take control of Notepad and delete it Even if you’re on an administrator account, you can’t just delete Notepad – Microsoft has made some security gains in this respect. Fortunately for us, it’s still possible to take control of a file and delete it without resorting to nasty hacks like disabling UAC. Navigate to one of the directories that contain Notepad. Right-click on it and select Properties.   Switch to the Security tab, then click on the Advanced button. Note that the owner of the file is a user called “TrustedInstaller”. You can’t do much with files owned by TrustedInstaller, so let’s take control of it. Click the Edit… button. Select the desired owner (you could choose your own account, but we’re going to give any Administrator control) and click OK. You’ll get a message that you need to close and reopen the Properties windows to edit permissions. Before doing that, confirm that the owner has changed to what you selected. Click OK, then OK again to close the Properties window. Right-click on Notepad and click on Properties again. Switch to the Security tab. Click on Edit…. Select the appropriate group or user name in the list at the top, then add a checkmark in the checkbox beside Full control in the Allow column. Click OK, then Yes to the dialog box that pops up. Click OK again to close the Properties window. Now you can delete Notepad, by either selecting it and pressing Delete on the keyboard, or right-click on it and click Delete.   You’re now free from Notepad’s foul clutches! Repeat this procedure for the remaining folders (or folder, on 32-bit Windows 7). Drop in your replacement Copy your Notepad replacement’s executable, which should still be on your desktop. Browse to the two or three folders listed above and copy your .exe to those locations. If prompted for Administrator permission, click Continue. If your executable file was named something other than “notepad.exe”, rename it to “notepad.exe”. Don’t be alarmed if the thumbnail still shows the old Notepad icon. Double click on Notepad and your replacement should open. To make doubly sure that it works, press Win+R to bring up the Run dialog box and enter “notepad” into the text field. Press enter or click OK. Now you can allow Windows to open files with Notepad by default with little to no shame! All without restarting or having to disable UAC! Similar Articles Productive Geek Tips Search and Replace Specific Formatting (fonts, styles,etc) in Microsoft WordHow to Drag Files to the Taskbar to Open Them in Windows 7Customize the Windows 7 or Vista Send To MenuKill Processes from the Windows Command LineChange Your Windows 7 Library Icons the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use My TextTools to Edit and Organize Text Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor

  Read the article

• jQuery 1.4 Opacity and IE Filters

  - by Rick Strahl

  Ran into a small problem today with my client side jQuery library after switching to jQuery 1.4. I ran into a problem with a shadow plugin that I use to provide drop shadows for absolute elements – for Mozilla WebKit browsers the –moz-box-shadow and –webkit-box-shadow CSS attributes are used but for IE a manual element is created to provide the shadow that underlays the original element along with a blur filter to provide the fuzziness in the shadow. Some of the key pieces are: var vis = el.is(":visible"); if (!vis) el.show(); // must be visible to get .position var pos = el.position(); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); This has always worked in previous versions of jQuery, but with 1.4 the original filter no longer works. It appears that applying the opacity after the original filter wipes out the original filter. IOW, the opacity filter is not applied incrementally, but absolutely which is a real bummer. Luckily the workaround is relatively easy by just switching the order in which the opacity and filter are applied. If I apply the blur after the opacity I get my correct behavior back with both opacity: sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); While this works this still causes problems in other areas where opacity is implicitly set in code such as for fade operations or in the case of my shadow component the style/property watcher that keeps the shadow and main object linked. Both of these may set the opacity explicitly and that is still broken as it will effectively kill the blur filter. This seems like a really strange design decision by the jQuery team, since clearly the jquery css function does the right thing for setting filters. Internally however, the opacity setting doesn’t use .css instead hardcoding the filter which given jQuery’s usual flexibility and smart code seems really inappropriate. The following is from jQuery.js 1.4: var style = elem.style || elem, set = value !== undefined; // IE uses filters for opacity if ( !jQuery.support.opacity && name === "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level style.zoom = 1; // Set the alpha filter to set the opacity var opacity = parseInt( value, 10 ) + "" === "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"; var filter = style.filter || jQuery.curCSS( elem, "filter" ) || ""; style.filter = ralpha.test(filter) ? filter.replace(ralpha, opacity) : opacity; } return style.filter && style.filter.indexOf("opacity=") >= 0 ? (parseFloat( ropacity.exec(style.filter)[1] ) / 100) + "": ""; } You can see here that the style is explicitly set in code rather than relying on $.css() to assign the value resulting in the old filter getting wiped out. jQuery 1.32 looks a little different: // IE uses filters for opacity if ( !jQuery.support.opacity && name == "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level elem.zoom = 1; // Set the alpha filter to set the opacity elem.filter = (elem.filter || "").replace( /alpha\([^)]*\)/, "" ) + (parseInt( value ) + '' == "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"); } return elem.filter && elem.filter.indexOf("opacity=") >= 0 ? (parseFloat( elem.filter.match(/opacity=([^)]*)/)[1] ) / 100) + '': ""; } Offhand I’m not sure why the latter works better since it too is assigning the filter. However, when checking with the IE script debugger I can see that there are actually a couple of filter tags assigned when using jQuery 1.32 but only one when I use jQuery 1.4. Note also that the jQuery 1.3 compatibility plugin for jQUery 1.4 doesn’t address this issue either. Resources ww.jquery.js (shadow plug-in $.fn.shadow) © Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery  

  Read the article

• Create a Persistent Bootable Ubuntu USB Flash Drive

  - by Trevor Bekolay

  Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

  Read the article

• It’s nice to be important, but it’s more important to be nice

  - by BuckWoody

  I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge.   (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot)   I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea!  No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example.   Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement.   Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.”   Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you.   The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.”   The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person.   Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way.   OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• SQL SERVER – PAGEIOLATCH_DT, PAGEIOLATCH_EX, PAGEIOLATCH_KP, PAGEIOLATCH_SH, PAGEIOLATCH_UP – Wait Type – Day 9 of 28

  - by pinaldave

  It is very easy to say that you replace your hardware as that is not up to the mark. In reality, it is very difficult to implement. It is really hard to convince an infrastructure team to change any hardware because they are not performing at their best. I had a nightmare related to this issue in a deal with an infrastructure team as I suggested that they replace their faulty hardware. This is because they were initially not accepting the fact that it is the fault of their hardware. But it is really easy to say “Trust me, I am correct”, while it is equally important that you put some logical reasoning along with this statement. PAGEIOLATCH_XX is such a kind of those wait stats that we would directly like to blame on the underlying subsystem. Of course, most of the time, it is correct – the underlying subsystem is usually the problem. From Book On-Line: PAGEIOLATCH_DT Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Destroy mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_EX Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Exclusive mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_KP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Keep mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_SH Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Shared mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_UP Occurs when a task is waiting on a latch for a buffer that is in an I/O request. The latch request is in Update mode. Long waits may indicate problems with the disk subsystem. PAGEIOLATCH_XX Explanation: Simply put, this particular wait type occurs when any of the tasks is waiting for data from the disk to move to the buffer cache. ReducingPAGEIOLATCH_XX wait: Just like any other wait type, this is again a very challenging and interesting subject to resolve. Here are a few things you can experiment on: Improve your IO subsystem speed (read the first paragraph of this article, if you have not read it, I repeat that it is easy to say a step like this than to actually implement or do it). This type of wait stats can also happen due to memory pressure or any other memory issues. Putting aside the issue of a faulty IO subsystem, this wait type warrants proper analysis of the memory counters. If due to any reasons, the memory is not optimal and unable to receive the IO data. This situation can create this kind of wait type. Proper placing of files is very important. We should check file system for the proper placement of files – LDF and MDF on separate drive, TempDB on separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. It is very possible that there are no proper indexes on the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can significantly reduce lots of CPU, Memory and IO (considering cover index has much lesser columns than cluster table and all other it depends conditions). You can refer to the two articles’ links below previously written by me that talk about how to optimize indexes. Create Missing Indexes Drop Unused Indexes Updating statistics can help the Query Optimizer to render optimal plan, which can only be either directly or indirectly. I have seen that updating statistics with full scan (again, if your database is huge and you cannot do this – never mind!) can provide optimal information to SQL Server optimizer leading to efficient plan. Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All of the discussions of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• It’s nice to be important, but it’s more important to be nice

  - by BuckWoody

  I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge.   (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot)   I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea!  No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example.   Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement.   Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.”   Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you.   The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.”   The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person.   Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way.   OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Play Your Favorite DOS Games in XP, Vista, and Windows 7

  - by Matthew Guay

  Want to take a trip down memory lane with old school DOS games?  D-Fend Reloaded makes it easy for you to play your favorite DOS games directly on XP, Vista, and Windows 7. D-Fend Reloaded is a great frontend for DOSBox, the popular DOS emulator.  It lets you install and run many DOS games and applications directly from its interface without ever touching a DOS prompt.  It works great on XP, Vista, and Windows 7 32 & 64-bit versions.   Getting Started Download D-Fend Reloaded (link below), and install with the default settings.  You don’t need to install DOSBox, as D-Fend Reloaded will automatically install all the components you need to run DOS games on Windows. D-Fend Reloaded can also be installed as a portable application, so you can run it from a flash drive on any Windows computer by selecting User defined installation. Then select Portable mode installation. Once D-Fend Reloaded is installed, you can go ahead and open the program. Then simply click “Accept all settings” to apply the default settings.   D-Fend is now ready to run all of your favorite DOS games. Installing DOS Games and Applications: To install a DOS game or application, simply drag-and-drop a zip file of the app into D-Fend Reloaded’s window.  D-Fend Reloaded will automatically extract the program… Then will ask you to name the application and choose where to store it — by default it uses the name of the DOS app. Now you’ll see a new entry for the app you just installed.  Simply double-click to run it.   D-Fend will remind you that you can switch out of fullscreen mode by pressing Alt+Enter, and can also close the DOS application by pressing Ctrl+F9.  Press Ok to run the program. Here we’re running Ms. PacPC, a remake of the classic game Ms. Pac-Man, in full-screen mode.  All features work automatically, including sound, and you never have to setup anything from DOS command line — it just works. Here it’s in windowed mode running on Windows 7. Please note that your color scheme may change to Windows Basic while running DOS applications. You can run DOS application just as easily.  Here’s Word 5.5 running in in DOSBox through D-Fend Reloaded… Game Packs: Want to quickly install many old DOS freeware and trial games?  D-Fend Reloaded offers several game packs that let you install dozens of DOS games with only four clicks…just download and run the game pack installer of your choice (link below). Now you’ve got a selection of DOS games to choose from. Here’s a group of poor lemmings walking around … in Windows 7. Conclusion D-Fend Reloaded gives you a great way to run your favorite DOS games and applications directly from XP, Vista, and Windows 7.  Give it a try, and relive your DOS days from the comfort of your Windows desktop. What were some of your favorite DOS games and applications? Leave a comment and let us know. Links Download D-Fend Reloaded Download DOS game packs for D-Fend Reloaded Download Ms. Pac-PC Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Go Retro with PacmanThursday’s Pre-Holiday Lazy Links RoundupFriday Fun: Five More Time Wasting Online GamesFriday Fun: Holiday Themed Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier

  Read the article

• Logical Domain Modeling Made Simple

  - by Knut Vatsendvik

  How can logical domain modeling be made simple and collaborative? Many non-technical end-users, managers and business domain experts find it difficult to understand the visual models offered by many UML tools. This creates trouble in capturing and verifying the information that goes into a logical domain model. The tools are also too advanced and complex for a non-technical user to learn and use. We have therefore, in our current project, ended up with using Confluence as tool for designing the logical domain model with the help of a few very useful plugins. Big thanks to Ole Nymoen and Per Spilling for their expertise in this field that made this posting possible. Confluence Plugins Here is a list of Confluence plugins used in this solution. Install these before trying out the macros used below. Plugin Description Copy Space Allows a space administrator to copy a space, including the pages within the space Metadata Supports adding metadata to Wiki pages Label Manages labeling of pages Linking Contains macros for linking to templates, the dashboard and other Table Enhances the table capability in Confluence Creating a Confluence Space First we need to create a new confluence space for the domain model. Click the link Create a Space located below the list of spaces on the Dashboard. Please contact your Confluence administrator is you do not have permissions to do this.   For illustrative purpose all attributes and entities in this posting are based on my imaginary project manager domain model. When a logical domain model is good enough for being implemented, do a copy of the Confluence Space (see Copy Space plugin). In this way you create a stable version of the logical domain model while further design can continue with the new copied space. Typical will the implementation phase result in a database design and/or a XSD schema design. Add Space Templates Go to the Home page of your Confluence Space. Navigate to the Browse drop-down menu and click on Advanced. Then click the Templates option in the left navigation panel. Click Add New Space Template to add the following three templates. Name: attribute {metadata-list} || Name | | || Type | | || Format | | || Description | | {metadata-list} {add-label:attribute} Name: primary-type {metadata-list} || Name | || || Type | || || Format | || || Description | || {metadata-list} {add-label:primary-type} Name: complex-type {metadata-list} || Name | || || Description |  || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | {add-label:complex-type,entity} The metadata-list macro (see Metadata plugin) will save a list of metadata values to the page. The add-label macro (see Label plugin) will automatically label the page. Primary Types Page Our first page to add will act as container for our primary types. Switch to Wiki markup when adding the following content to the page. | (+) {add-page:template=primary-type|parent=@self}Add new primary type{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|root=@self|pages=@descendents} Once the page is created, click the Add new primary type (create-page macro) to start creating a new pages. Here is an example of input to the LocalDate page. Embrace the LocalDate with square brackets [] to make the page linkable. Again switch to Wiki markup before editing. {metadata-list} || Name | [LocalDate] || || Type | Date || || Format | YYYY-MM-DD || || Description | Date in local time zone. YYYY = year, MM = month and DD = day || {metadata-list} {add-label:primary-type} The metadata-report macro will show a tabular report of all child pages.   Attributes Page The next page will act as container for all of our attributes. | (+) {add-page:template=attribute|parent=@self|title=attribute}Add new attribute{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|pages=@descendants} Here is an example of input to the startDate page. {metadata-list} || Name | [startDate] || || Type | [LocalDate] || || Format | {metadata-from:LocalDate|Format} || || Description | The projects start date || {metadata-list} {add-label:attribute} Using the metadata-from macro we fetch the text from the previously created LocalDate page. Complex Types Page The last page in this example shows how attributes can be combined together to form more complex types.   h3. Intro Overview of complex types in the domain model. | (+) {add-page:template=complex-type|parent=@self}Add a new complex type{add-page}\\ | {metadata-report:Name,Description|sort=Name|root=@self|pages=@descendents} Here is an example of input to the ProjectType page. {metadata-list} || Name | [ProjectType] || || Description | Represents a project || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [projectId] | {metadata-from:projectId|Type} | {metadata-from:projectId|Format} | {metadata-from:projectId|Description} | | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | | [description] | {metadata-from:description|Type} | {metadata-from:description|Format} | {metadata-from:description|Description} | | [startDate] | {metadata-from:startDate|Type} | {metadata-from:startDate|Format} | {metadata-from:startDate|Description} | {add-label:complex-type,entity} Gives us this Conclusion Using a web-based corporate Wiki like Confluence to create a logical domain model increases the collaboration between people with different roles in the enterprise. It’s my believe that this helps the domain model to be more accurate, and better documented. In our real project we have more pages than illustrated here to complete the documentation. We do also still use UML tools to create different types of diagrams that Confluence do not support. As a last tip, an ImageMap plugin can make those diagrams clickable when used in pages. Enjoy!

  Read the article

• Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help.

  - by adam.hawley

  Between all the press coverage on the unauthorized release of 251,287 diplomatic documents and on previous extensive releases of classified documents on the events in Iraq and Afghanistan, one could be forgiven for thinking massive leaks are really an issue for governments, but it is not: It is an issue for corporations as well. In fact, corporations are apparently set to be the next big target for things like Wikileaks. Just the threat of such a release against one corporation recently caused the price of their stock to drop 3% after the leak organization claimed to have 5GB of information from inside the company, with the implication that it might be damaging or embarrassing information. At the moment of this blog anyway, we don't know yet if that is true or how they got the information but how did the diplomatic cable leak happen? For the diplomatic cables, according to press reports, a private in the military, with some appropriate level of security clearance (that is, he apparently had the correct level of security clearance to be accessing the information...he reportedly didn't "hack" his way through anything to get to the documents which might have raised some red flags...), is accused of accessing the material and copying it onto a writeable CD labeled "Lady Gaga" and walking out the door with it. Upload and... Done. In the same article, the accused is quoted as saying "Information should be free. It belongs in the public domain." Now think about all the confidential information in your company or non-profit... from credit card information, to phone records, to customer or donor lists, to corporate strategy documents, product cost information, etc, etc.... And then think about that last quote above from what was a very junior level person in the organization...still feeling comfortable with your ability to control all your information? So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work? A major first step it to make it physically, logistically much harder to walk away with the information. If the user with malicious intent has no way to copy to removable or moble media (USB sticks, thumb drives, CDs, DVDs, memory cards, or even laptop disk drives) then, as a practical matter it is much more difficult to physically move the information outside the firewall. But how can you control access tightly and reliably and still keep your hundreds or even thousands of users productive in their daily job? Oracle Desktop Virtualization products can help.Oracle's comprehensive suite of desktop virtualization and access products allow your applications and, most importantly, the related data, to stay in the (highly secured) data center while still allowing secure access from just about anywhere your users need to be to be productive.  Users can securely access all the data they need to do their job, whether from work, from home, or on the road and in the field, but fully configurable policies set up centrally by privileged administrators allow you to control whether, for instance, they are allowed to print documents or use USB devices or other removable media.  Centrally set policies can also control not only whether they can download to removable devices, but also whether they can upload information (see StuxNet for why that is important...)In fact, by using Sun Ray Client desktop hardware, which does not contain any disk drives, or removable media drives, even theft of the desktop device itself would not make you vulnerable to data loss, unlike a laptop that can be stolen with hundreds of gigabytes of information on its disk drive.  And for extreme security situations, Sun Ray Clients even come standard with the ability to use fibre optic ethernet networking to each client to prevent the possibility of unauthorized monitoring of network traffic.But even without Sun Ray Client hardware, users can leverage Oracle's Secure Global Desktop software or the Oracle Virtual Desktop Client to securely access server-resident applications, desktop sessions, or full desktop virtual machines without persisting any application data on the desktop or laptop being used to access the information.  And, again, even in this context, the Oracle products allow you to control what gets uploaded, downloaded, or printed for example.Another benefit of Oracle's Desktop Virtualization and access products is the ability to rapidly and easily shut off user access centrally through administrative polices if, for example, an employee changes roles or leaves the company and should no longer have access to the information.Oracle's Desktop Virtualization suite of products can help reduce operating expense and increase user productivity, and those are good reasons alone to consider their use.  But the dynamics of today's world dictate that security is one of the top reasons for implementing a virtual desktop architecture in enterprises.For more information on these products, view the webpages on www.oracle.com and the Oracle Technology Network website.

  Read the article

• Help Protect Your Children with the CEOP Enhanced Internet Explorer 8

  - by Asian Angel

  Do you want to make Internet Explorer safer and more helpful for you and family? Then join us as we look at the CEOP (Child Exploitation and Online Protection Centre) enhanced version of Internet Explorer 8. Setting CEOP Up We chose to install the whole CEOP pack in order to have access to complete set of CEOP Tools. The install process will be comprised of two parts…it will begin with CEOP branded windows showing the components being installed… Note: The components can be downloaded separately for those who only want certain CEOP components added to their browser. Then it will move to the traditional Microsoft Internet Explorer 8 install windows. One thing that we did notice is that here you will be told that you will need to restart your computer but in other windows a log off/log on process is mentioned. Just to make certain that everything goes smoothly we recommend restarting your computer when the installation process is complete. In the EULA section you can see the versions of Windows that the CEOP Pack works with. Once you get past the traditional Microsoft install windows you will be dropped back into the CEOP branded windows. CEOP in Action After you have restarted your computer and opened Internet Explorer you will notice that your homepage has been changed. When it comes to your children that is not a bad thing in this instance. It will also give you an opportunity to look through the CEOP online resources. For the moment you may be wondering where everything is but do not worry. First you can find the two new search providers in the drop-down menu for your “Search Bar” and select a new default if desired. The second thing to look for are the new links that have been added to your “Favorites Menu”. These links can definitely be helpful for you and your family. The third part will require your “Favorites Bar” to be visible in order to see the “Click CEOP Button”. If you have not previously done so you will need to turn on subscribing for “Web Slices”. Click on “Yes” to finish the subscription process. Clicking on the “CEOP Button” again will show all kinds of new links to help provide information for you and your children. Notice that the top part is broken down into “topic categories” while the bottom part is set up for “age brackets”…very nice for helping you focus on the information that you want and/or need. Looking for information and help on a particular topic? Clicking on the “Cyberbullying Link” for example will open the following webpage with information about cyberbullying and a link to get help with the problem. Need something that is focused on your child’s age group? Clicking on the “8-10? Link” as an example opened this page. Want information that is focused on you? The “Parent? Link” leads to this page. The “topic categories & age brackets” make the CEOP Button a very helpful and “family friendly” addition to Internet Explorer. Perhaps you (or your child) want to conduct a search for something that is affecting your child. As you type in a “search term” both of the search providers will provide helpful suggestions for dealing with the problem. We felt that these were very nice suggestions in both instances here… Conclusion We have been able to give you a good peek at what the CEOP Tools can do but the best way to see how helpful it can be for you and your family is try it for yourself. Your children’s safety and happiness is worth it. Links Download the Internet Explorer CEOP Pack (link at bottom of webpage) Note: If you are interested in a singular component or only some use these links. Download the Click CEOP Button Download Search CEOP Download Internet Safety and Security Search Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPWhen to Use Protect Tab vs Lock Tab in FirefoxMake Ctrl+Tab in Internet Explorer 7 Use Most Recent OrderRemove ISP Text or Corporate Branding from Internet Explorer Title BarQuick Hits: 11 Firefox Tab How-Tos TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI

  Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >