Search Results

Search found 8229 results on 330 pages for 'mp3 tag'.

Page 200/330 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

• Fill a Flash Drive with Portable Software using Lupo PenSuite

  - by Asian Angel

  A flash drive full of portable software is helpful to have along wherever you go. The Lupo PenSuite lets you choose from three different versions to get the best fit for your everyday needs. Note: If running the full version you will need a 512 MB USB flash drive or larger. Using Lupo PenSuite The one window to watch for during the setup process is where you have the opportunity to add a specific language pack if needed. Outside of that all that you need to do is sit back and wait for the suite to be extracted. Note: Extraction times will vary based on version and extraction location. Here we browsed to our flash drive to extract it to… Once the setup process is complete locate and double click the Lupo_PenSuite.exe file. This one time window will present you the opportunity to start using the suite immediately, or go directly into the options. When the suite is active you will have a new system tray icon that operates as a start menu button. At the bottom you can monitor the remaining room on your flash drive, and use the close button to exit the suite (may display as a power button based on menu theme). A quick look at the set up inside the suite. There is a pre-configured area for organizing and storing your personal files. Prefer a classic style menu? Just select for it in the options (various tab) and enjoy a smaller streamlined look. Note: You can also change the theme for the regular menu and add a user pic. The suite provides access to your portable software and online sites. You get to enjoy the best of both as shown in the following examples. Websites will open using the suite’s portable Firefox install. VLC is ready to play your downloaded videos. The suite also has some very nice photo editing programs added in. Installing Additional Apps If one of your favorite programs is not included in the suite version, it only takes a few minutes to add it in. Go to the Additional Apps webpage, download the app(s), and extract them onto your hard-drive. Note: Link for additional apps webpage provided below. Add the extracted app(s) to the MyApps folder in the suite’s folder hierarchy. Click on ASuite in the suite’s start menu. Drag and drop the portable app’s exe file into the MyApps section in the ASuite window. Your new software’s shortcut should display as shown here. Close this window when finished. Checking the suite’s start menu will show your new software ready to be used. Conclusion If you need a good portable software collection to carry with you on a flash drive then Lupo PenSuite is definitely worth taking a look at. We tested Lupo PenSuite on XP, Vista, and Windows 7 and it works great on all three. Another popular choice is PortableApps and you can check out our Review of that too they are essentially the same thing, each is just packaged differently. Links Download Lupo PenSuite (Full, Lite, & Zero versions) *Download links approximately one-third down the page. Download Additional Apps for Lupo PenSuite Download Additional Skins for Lupo PenSuite Start Menu View Video Tutorials *Has tutorial for easy updating of entire suite. Similar Articles Productive Geek Tips Install and Run Applications from Your iPod, Flash Drive or Mp3 PlayerRebit Backup Software [Review]BitLocker To Go Encrypts Portable Flash Drives in Windows 7Create a Bootable Ubuntu USB Flash Drive the Easy WaySpeed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• Remove Ubuntu or XP from the Windows 7 Boot Menu

  - by Trevor Bekolay

  If you’ve ever used a dual-boot system and then removed one of the operating systems, it can still show up in Windows 7’s boot menu. We’ll show you how to get rid of old entries and speed up the boot process. To edit the boot menu, we will use a program called bcdedit that’s included with Windows 7. There are some third-party graphical applications that will edit the menu, but we prefer to use built-in applications when we can. First, we need to open a command prompt with Administrator privileges. Open the start menu and type cmd into the search box. Right click on the cmd program that shows up, and select Run as administrator. Alternatively, if you’ve disabled the search box, you can find the command prompt in All Programs > Accessories. In the command prompt, type in bcdedit and press enter. A list of the boot menu entries will appear. Find the entry that you would like to delete – in our case, this is the last one, with the description of “Ubuntu”. What we need is the long sequence of characters marked as the identifier. Rather than type it out, we will copy it to be pasted later. Right-click somewhere in the command prompt window and select Mark. By clicking the left mouse button and dragging over the appropriate text, select the identifier for the entry you want to delete, including the left and right curly braces on either end. Press the Enter button. This will copy the text to the clipboard. In the command prompt, type in: bcdedit /delete and then right-click somewhere in the command prompt window and select Paste. Press Enter to input the now completed command. The boot menu entry will now be deleted. Type in bcdedit again to confirm that the offending entry is now gone from the list. If you reboot your machine now, you will notice that the boot menu does not even come up, because there is only one entry in the list (unless you had more than two entries to begin with). You’ve shaved a few seconds off of the boot process! Not to mention the added effort of pressing the enter button. There’s a lot more that you can do with bcdedit, like change the description of boot menu entries, create new entries, and much more. For a list of what you can do with bcdedit, type the following into the Command Window. bcdedit /help While there are third-party GUI solutions for accomplishing the same thing, using this method will save you time by not having to go through the extra steps of installing an extra program. Similar Articles Productive Geek Tips Reinstall Ubuntu Grub Bootloader After Windows Wipes it OutClean Up Ubuntu Grub Boot Menu After UpgradesHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting UbuntuChange the GRUB Menu Timeout on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3

  Read the article

• Convert .3GP and .3G2 Files to AVI / MPEG for Free

  - by DigitalGeekery

  3GP and .3G2 are common video capture formats used on many mobile phones, but they may not be supported by your favorite media player. Today we’ll show you a quick and easy way to convert those files to AVI or MPG format with the free Windows application, Pazera Free 3GP to AVI Converter. Download the Pazera Free 3GP to AVI Converter. You’ll have to unzip the download folder, but there is no need to install the application. Just double-click the 3gptoavi.exe file to run the application. To add your 3GP or 3G2 files to the queue to be converted, click on the Add files  button at the top left. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time.   Most users will find it preferable to use one of the pre-configured profiles for their conversion settings. To load a profile, choose one from the Profile drop down list and then click the Load button. You will see the profile update the settings in the panels at the bottom of the application. We tested Pazera Free 3GP to AVI Converter with 3GP files recorded on a Motorola Droid, and found the AVI H.264 Very High Q. profile to return the best results for AVI output, and the MPG – DVD NTSC: MPEG-2 the best results for MPG output. Other profiles produced smaller file sizes, but at a cost of reduced quality video output.   More advanced users may tweak video and audio settings to their liking in the lower panels. Click on the AVI button under Output file format / Video settings to adjust settings AVI… Or the MPG button to adjust the settings for MPG output. By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. When you’ve chosen your settings, click Convert to begin the conversion process.   A conversion output box will open and display the progress. When finished, click Close. Now you’re ready to enjoy your video in your favorite media player. Pazera Free 3GP to AVI Converter isn’t the most robust media conversion tool, but it does what it is intended to do. It handles the task of 3GP to AVI / MPG conversion very well. It’s easy enough for the beginner to manage without much trouble, but also has enough options to please more experienced users. Download Pazera Free 3GP to AVI Converter Similar Articles Productive Geek Tips How To Convert Video Files to MP3 with VLCEasily Change Audio File Formats with XRECODEConvert PDF Files to Word Documents and Other FormatsConvert Video and Remove Commercials in Windows 7 Media Center with MCEBuddy 1.1Compress Large Video Files with DivX / Xvid and AutoGK TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Install, Remove and HIDE Fonts in Windows 7 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad

  Read the article

• Monitor System Resources from the Windows 7 Taskbar

  - by Asian Angel

  The problem with most system monitoring apps is that they get covered up with all of your open windows, but you can solve that problem by adding monitoring apps to the Taskbar. Setting Up & Using SuperbarMonitor All of the individual monitors and the .dll files necessary to run them come in a single zip file for your convenience. Simply unzip the contents, add them to an appropriate “Program Files Folder”, and create shortcuts for the monitors that you would like to use on your system. For our example we created shortcuts for all five monitors and set the shortcuts up in their own “Start Menu Folder”. You can see what the five monitors (Battery, CPU, Disk, Memory, & Volume) look like when running…they are visual in appearance without text to clutter up the looks. The monitors use colors (red, green, & yellow) to indicate the amount of resources being used for a particular category. Note: Our system is desktop-based but the “Battery Monitor” was shown for the purposes of demonstration…thus the red color seen here. Hovering the mouse over the “Battery, CPU, Disk, & Memory Monitors” on our system displayed a small blank thumbnail. Note: The “Battery Monitor” may or may not display more when used on your laptop. Going one step further and hovering the mouse over the thumbnails displayed a small blank window. There really is nothing that you will need to worry with outside of watching the color for each individual monitor. Nice and simple! The one monitor with extra features on the thumbnail was the “Volume Monitor”. You can turn the volume down, up, on, or off from here…definitely useful if you have been wanting to hide the “Volume Icon” in the “System Tray”. You can also pin the monitors to your “Taskbar” if desired. Keep in mind that if you do close any of the monitors they will “temporarily” disappear from the “Taskbar” until the next time they are started. Note: If you want the monitors to start with your system each time you will need to add the appropriate shortcuts to the “Startup Sub-menu” in your “Start Menu”. Conclusion If you have been wanting a nice visual way to monitor your system’s resources then SuperbarMonitor is definitely worth trying out. Links Download SuperbarMonitor Similar Articles Productive Geek Tips Monitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersUse Windows Vista Reliability Monitor to Troubleshoot CrashesTaskbar Eliminator Does What the Name Implies: Hides Your Windows TaskbarBring Misplaced Off-Screen Windows Back to Your Desktop (Keyboard Trick)How To Fix System Tray Tooltips Not Displaying in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

  Read the article

• Extract Audio from a Video File with Pazera Free Audio Extractor

  - by DigitalGeekery

  Have you ever wanted to extract some or all of the audio from a video file?  Today we’ll take a look at Pazera Free Audio Extractor. A simple audio converter that specializes in that very task. Download the Pazera Free Audio Extractor. (See download link below) You’ll need to unzip the download folder, but there is no need to install the application. Simply double-click the AudioExtractor.exe file to run the application. To add your video files to the queue to be converted, click on the Add files  button at the top left. You can add multiple files to the queue and convert them all at one time. Browse for your video file, and click Open.   Your video will be added to the Queue for processing.   Under Output directory you can choose to output to a folder of your choice. Outputting to the same folder as the input folder is the default.   Pazera Free Audio Extractor includes pre-configured profiles that will simplify the process of choosing conversion settings. To load a profile, choose one from the Profile drop down list and then click the Load button. You can choose to output to MP3, AAC, AC3, WMA, FLAC, OGG or WAV file format.   You will see the profile update the Audio settings in the panels at the lower left of the application. If you wish, you may also select your own custom settings. Advanced Settings The Advanced settings can be used if you want to extract only a portion of the the audio, such as a clip of dialog or a song from a movie. To extract only a portion of the audio, set the start time by selecting the Start time offset check box, then entering the time in the video clip where the audio begins. To set the end time, begin by selecting the Duration check box. Now, you can either select the Duration radio button and enter the amount of time for which you would like to extract the audio, or you can select the End time offset radio button and enter the time in the video clip where the audio ends. When you are ready to convert, click the CONVERT button on the menu at the top of the screen.   An output box will open and display the conversion progress. When finished, click Close.   Now you are ready to enjoy your audio clip. Pazera Free Audio Extractor is a basic audio tool that is easy enough for everyone to use. It runs on Windows only and supports most common video formats including AVI, FLV, MP4, MPG, MOV, 3GP, and WMV. Download Free Audio Extractor 1.3 Similar Articles Productive Geek Tips Eufony Free Audio Player – Resource Gentle Audio PlayerConvert .3GP and .3G2 Files to AVI / MPEG for FreeTurn Off Auto-Play of Audio and Video CDs and DVDs in UbuntuHow to Make/Edit a movie with Windows Movie Maker in Windows VistaEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs

  Read the article

• Bose USB audio: crackling popping sound, eventually die

  - by Richard Barrett

  I've been trying to troubleshoot this issue for a while now. Any help would be much appreciated. I'm having trouble getting my Bose "Companion 5 multimedia speakers" working with my installation of Ubuntu 12.04 (link to Bose product here: http://www.bose.com/controller?url=/shop_online/digital_music_systems/computer_speakers/companion_5/index.jsp ). The issue seems to be low level (not just Ubuntu). What happens: When I boot into Ubuntu, I can get Rhythm box to play ok. However, if I try anything else (an .avi file, a webpage, or Clementine player with mp3 files) I get crackling, popping, or choppy sounds. If I move the mouse around, especially if it seems graphic intensive, the problem gets worse (more crackling noises). The more taxing it appears to be, the more likely it is that the sound will just die altogether until I reboot. For some reason the videos at www.bloomberg.com seem especially bad for it (my sound normally goes dead in under 45 seconds and won't work until reboot). Both my desktop running Ubuntu 12.04 and my laptop (running the same) have the same crackling problem. Troubleshooting so far: A friend of mine who knows linux well tried to solve it for me without any luck. He took pulseaudio out of the equation, but still had the problem just using AlSA. Among the many things he tried was adjusting the latency, but that didn't help either. I've also tried things like adjusting the USB device settings in the config file from -2 to -1 so that it will use my USB sound and I also commented out the lines that would stop that. These don't do anything. (That really seems like it's for someone who is getting no sound at all, so it's not surprising this won't work.) My friend's laptop running his Archlinux could play my Bose USB speakers without any problems. I also tried setting my daemon.conf file to use 6 channels (based on this http://lotphelp.com/lotp/configure-ubuntu-51-surround-sound ) but that didn't work either. I recently used a DVD to boot into Ubuntu Studio 12.04 (because it uses a live audio kernel) and this happened: I got perfect sound for a minute or two When I started moving windows around while sound was playing, the sound died again. Perhaps more interesting: There is a headphone out jack on the Bose system. When I use it, the audio is perfect for all applications (even the deadly bloomberg.com videos with .avi playing at the same time and moving around windows). Also, there is an audio-in jack on the Bose system. I can use a male-to-male mini jack to go from my soundcard's output to the Bose input and then all sound works perfectly. -However, it still requires the Bose to be plugged in to USB, otherwise I lose all sound. Any thoughts? Any suggestions for trouble shooting? (Or any suggestions for somewhere else to post to solve this?) Any logs or other files I can provide to help someone help me work this out? Your help is much appreciated! Rick BTW: I sometimes get people posting responses like "My Bose USB system works great with Ubuntu 12.04," without any more details. Is there anything I should ask such people to narrow down my problem? (It's kind of annoying to hear such a response because it doesn't help solve my problem.)

  Read the article

• Java Spotlight Episode 76: Pro Java FX2 - A Definative Guide to Rich Clients with Java Technology

  - by Roger Brinkley

  Tweet An interview with the authors of Pro Java FX2: A Definative Guide to Rich Clients with Java Technology. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Angela Caicedo has created 3 new Java FX screen cast videos on java UTube channel: Part 1: Building your First Java FX Application with Netbeans 7.1, Part 2: Building your First Java FX Application with Netbeans 7.1, and Getting Started with Scene Builder.  Events March 26-29, EclipseCon, Reston, USA March 27, Virtual Developer Days - Java (Asia Pacific (English)),9:30 am to 2:00pm IST / 12:00pm to 4.30pm SGT  / 3.00pm - 7.30pm AEDT April 4-5, JavaOne Japan, Tokyo, Japan April 12, GreenJUG, Greenville, SC April 17-18, JavaOne Russia, Moscow Russia April 18–20, Devoxx France, Paris, France April 26, Mix-IT, Lyon, France, May 3-4, JavaOne India, Hyderabad, India Feature InterviewPro JavaFX 2: A Definitive Guide to Rich Clients with Java Technology is available from Amazon.com in either paperback or on the Kindle.James L. (Jim) Weaver is a Java and JavaFX developer, author, and speaker with a passion for helping rich-client Java and JavaFX become preferred technologies for new application development. Books that Jim has authored include Inside Java, Beginning J2EE, and Pro JavaFX Platform, with the latter being updated to cover JavaFX 2.0. His professional background includes 15 years as a systems architect at EDS, and the same number of years as an independent developer. Jim is an international speaker at software technology conferences, including the JavaOne conferences in San Francisco and São Paulo. Jim blogs at http://javafxpert.com, tweets @javafxpert. Weiqi Gao is a principal software engineer with Object Computing, Inc., in St. Louis, MO. He has more than 18 years of software development experience and has been using Java technology since 1998. He is interested in programming languages, object-oriented systems, distributed computing, and graphical user interfaces. He is a presenter and a member of the steering committee of the St. Louis Java Users Group. Weiqi holds a PhD in mathematics. Stephen Chin is chief agile methodologist at GXS and a technical expert in client UI technologies. He is lead author on the Pro Android Flash title and coauthored the Pro JavaFX Platform title, which is the leading technical reference for JavaFX. In addition, Stephen runs the very successful Silicon Valley JavaFX User Group, which has hundreds of members and tens of thousands of online viewers. Finally, he is a Java Champion, chair of the OSCON Java conference, and an internationally recognized speaker featured at Devoxx, Codemash, AnDevCon, Jazoon, and JavaOne, where he received a Rock Star Award. Stephen can be followed on twitter @steveonjava and reached via his blog: http://steveonjava.com.Dean Iverson has been writing software professionally for more than 15 years. He is employed by the Virginia Tech Transportation Institute, where he is a rich client application developer. He also has a small software consultancy called Pleasing Software Solutions, which he cofounded with his wife. Johan Vos started to work with Java in 1995. As part of the Blackdown team, he helped port Java to Linux. With LodgON, the company he cofounded, he has been mainly working on Java-based solutions for social networking software. Because he can't make a choice between embedded development and enterprise development, his main focus is on end-to-end Java, combining the strengths of backend systems and embedded devices. His favorite technologies are currently Java EE/Glassfish at the backend and JavaFX at the frontend. Johan's blog can be followed at http://blogs.lodgon.com/johan, he tweets at http://twitter.com/johanvos. Mail Bag What’s Cool Gerrit Grunwald's SteelSeries FX Experience Tools Canned Animations ComboBox

  Read the article

• Improve Playback Using Enhancements in Windows Media Player 12

  - by DigitalGeekery

  Are you looking for ways to improve the playback of your media in Windows Media Player 12? We’ll show you how to do that by using the enhancements in WMP 12. If you are in Library mode, you’ll need to click the icon at the lower right to switch to Now Playing mode. Right-click anywhere in Media Player while in Now Playing mode, select Enhancements, and select any of the available options.   You can switch between the individual enhancements by clicking the right and left buttons at the top left.   Crossfading and Auto Volume Leveling The Auto Volume Leveling setting is just a simple toggle on and off. If your MP3 or WMA files have volume leveling information values.   You can automatically add volume leveling information values to all files you add to your library by switching to Library view, going to Tools > Options, and selecting Add volume leveling information values for new files on the Library tab. Click OK when finished.   Crossfading will gradually decrease the volume of the song that is ending (fade out) and increase volume of the song that is beginning. Click Turn on Crossfading and then click and drag the slider left or right change the amount of overlap between tracks. Graphic Equalizer The graphic equalizer is toggled on and off by clicking Turn on / Turn off at the top left. You can select pre-defined equalizer settings by music genre by clicking the Default list. The radio buttons on the left allow you to move the sliders individually, in a loose group or a tight group. You can always return to the default settings by clicking Reset. Play Speed Settings Choose a pre-defined settings by clicking Slow, Normal, or Fast. Uncheck the Snap slider to common speeds the move the slider right and left to your desired speed. If nothing else, these settings provide a little fun and amusement. Quiet Mode Quiet mode will level out any sharp volume highs and lows within a single track. Simply toggle the setting on or off and select whether you prefer Medium difference or Little difference by selecting one of the radio buttons. SRS WOW effects SRS WOW effects enhance low-frequency and stereo sound performance. Click Turn on to enable the TruBass and WOW Effect sliders. You can also optimize for your speaker type. Click to switch between Regular, Large, and Headphones. Video Settings Video Settings allow you to adjust the Hue, Brightness, Saturation, and Contrast.   You can also adjust the zoom settings by clicking Select video zoom settings.   Dolby Digital Settings Choose between Normal, Night, and Theater settings to adjust the audio for Dolby Digital content. This setting will only effect media with Dolby Digital sound. Looking for more ways to improve your media experience in WMP 12? Check out how to update metadata and cover art and how to share media with other Windows 7 computers on your home network. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxHow To Rip a Music CD in Windows 7 Media CenterStream Media from Windows 7 to XP with VLC Media PlayerInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

  Read the article

• Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

  - by Sven

  After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

  Read the article

• Open a File Browser From Your Current Command Prompt/Terminal Directory

  - by The Geek

  Ever been doing some work at the command line when you realized… it would be a lot easier if I could just use the mouse for this task? One command later, you’ll have a window open to the same place that you’re at. This same tip works in more than one operating system, so we’ll detail how to do it in every way we know how. Open a File Browser in Windows We’ve actually covered this before when we told you how to open an Explorer window from the command prompt’s current directory, but we’ll briefly review: Just type the follow command into your command prompt: explorer . Note: You could actually just type “start .” instead. And you’ll then see a file browsing window set to the same directory you were previous at. And yes, this screenshot is from Vista, but it works the same in every version of Windows. If that wasn’t good enough, you should really read how you can navigate in the File Open/Save dialogs with just the keyboard—now that’s a Stupid Geek Trick! Open a File Browser in Linux For this exercise, we’re going to assume that you’re using Gnome under a Linux flavor like Ubuntu, because that’s the most common. From your terminal window, just type in the following command: nautilus . And the next thing you know, you’ll have a file browser window open at the current location. You’ll see some type of error message at the prompt, but you can pretty much ignore that. You can also use “gnome-open .” if you want. Open Finder in Mac OS X All the Mac computers in this office are running Linux, so we haven’t had a chance to verify, but you should be able to use the following command on OS X to open Finder in the current terminal location: open . Open Dolphin on Linux KDE4 dolphin . Got any extra tips to help out your fellow readers? How do you do the same thing in KDE3? What about OS X? Leave your savvy advice in the comments, and maybe we’ll update the article. Or not. Either way, it’ll help somebody! Similar Articles Productive Geek Tips Keyboard Ninja: Concatenate Multiple Text Files in WindowsStupid Geek Tricks: Open an Explorer Window from the Command Prompt’s Current DirectoryHow to automate FTP uploads from the Windows Command LineShell Geek: Rename Multiple Files At OnceAdd "Open with gedit" to the right click menu in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Google Analytics recording event based on <a> title attribute

  - by rlsaj

  I am declaring: var title = (typeof(el.attr('title')) != 'undefined' ) ? el.attr('title') :""; and then have the following: else if (title.match(/^"Matching Content"\:/i)) { elEv.category = "Matching Content Click"; elEv.action = "click-Matching-Content"; elEv.label = href.replace(/^https?\:\/\//i, ''); elEv.non_i = true; elEv.loc = href; } However, using Google Analytics debugger this is not being recorded. Any suggestions? The complete function is: if (typeof jQuery != 'undefined') { jQuery(document).ready(function gLinkTracking($) { var filetypes = /\.(avi|csv|dat|dmg|doc.*|exe|flv|gif|jpg|mov|mp3|mp4|msi|pdf|png|ppt.*|rar|swf|txt|wav|wma|wmv|xls.*|zip)$/i; var baseHref = ''; if (jQuery('base').attr('href') != undefined) baseHref = jQuery('base').attr('href'); jQuery('a').on('click', function (event) { var el = jQuery(this); var track = true; var href = (typeof(el.attr('href')) != 'undefined' ) ? el.attr('href') :""; var title = (typeof(el.attr('title')) != 'undefined' ) ? el.attr('title') :""; var isThisDomain = href.match(document.domain.split('.').reverse()[1] + '.' + document.domain.split('.').reverse()[0]); if (!href.match(/^javascript:/i)) { var elEv = []; elEv.value=0, elEv.non_i=false; if (href.match(/^mailto\:/i)) { elEv.category = "Email link"; elEv.action = "click-email"; elEv.label = href.replace(/^mailto\:/i, ''); elEv.loc = href; } else if (title.match(/^"Matching Content"\:/i)) { elEv.category = "Matching Content Click"; elEv.action = "click-Matching-Content"; elEv.label = href.replace(/^https?\:\/\//i, ''); elEv.non_i = true; elEv.loc = href; } else if (href.match(filetypes)) { var extension = (/[.]/.exec(href)) ? /[^.]+$/.exec(href) : undefined; elEv.category = "File Downloaded"; elEv.action = "click-" + extension[0]; elEv.label = href.replace(/ /g,"-"); elEv.loc = baseHref + href; } else if (href.match(/^https?\:/i) && !isThisDomain) { elEv.category = "External link"; elEv.action = "click-external"; elEv.label = href.replace(/^https?\:\/\//i, ''); elEv.non_i = true; elEv.loc = href; } else if (href.match(/^tel\:/i)) { elEv.category = "Telephone link"; elEv.action = "click-telephone"; elEv.label = href.replace(/^tel\:/i, ''); elEv.loc = href; } else track = false; if (track) { _gaq.push(['_trackEvent', elEv.category.toLowerCase(), elEv.action.toLowerCase(), elEv.label.toLowerCase(), elEv.value, elEv.non_i]); if ( el.attr('target') == undefined || el.attr('target').toLowerCase() != '_blank') { setTimeout(function() { location.href = elEv.loc; }, 400); return false; } } } }); }); }

  Read the article

• Play audio file data - Spring MVC

  - by Vijay Veeraraghavan

  In my web-application, I have various audio clips uploaded by the users in the database stored in the BLOB column. The audio files are low bit rate WAV files. The clips are secured, one can see only those clips he has uploaded. Instead of user downloading the clip and playing it in his player, I need it be steamed online in the web page itself. In the jsp I use the <audio> tag with the source mapping to the controller mappping url. <td> <audio controls><source src="recfile/${au.id}" type="audio/mpeg" /></audio> </td> Where, the recfile is the request mapping and the au.id is the audio id. In the controller I process the request like below @RequestMapping(value = "/recfile/{id}", method = RequestMethod.GET, produces = { MediaType.APPLICATION_OCTET_STREAM_VALUE }) public HttpEntity<byte[]> downloadRecipientFile(@PathVariable("id") int id, ModelMap model, HttpServletResponse response) throws IOException, ServletException { LOGGER.debug("[GroupListController downloadRecipientFile]"); VoiceAudioLibrary dGroup = audioClipService.findAudioClip(id); if (dGroup == null || dGroup.getAudioData() == null || dGroup.getAudioData().length <= 0) { throw new ServletException("No clip found/clip has not data, id=" + id); } HttpHeaders header = new HttpHeaders(); I tried this too //header.setContentType(new MediaType("audio", "mp3")); header.setContentType(new MediaType("audio", "vnd.wave"); header.setContentLength(dGroup.getAudioData().length); return new HttpEntity<byte[]>(dGroup.getAudioData(), header); } When the jsp loads, the controller get the request, it serves back the audio data fetched from the database, the jsp too shows the player with the controls. But when I play it nothing happens. Why is it? Am I missing anything in the configuration? Am I doing it right?

  Read the article

• java.lang.ClassCastException: java.lang.Integer cannot be cast to java.util.HashMap

  - by kongkea

  I've got this Error When I click listview to show full image size. how can i solve it? Error 11-20 10:27:47.039: D/AndroidRuntime(5078): Shutting down VM 11-20 10:27:47.039: W/dalvikvm(5078): threadid=1: thread exiting with uncaught exception (group=0x40c061f8) 11-20 10:27:47.047: E/AndroidRuntime(5078): FATAL EXCEPTION: main 11-20 10:27:47.047: E/AndroidRuntime(5078): java.lang.ClassCastException: java.lang.Integer cannot be cast to java.util.HashMap 11-20 10:27:47.047: E/AndroidRuntime(5078): at com.example.mylistview.MainActivity$1.onItemClick(MainActivity.java:103) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.widget.AdapterView.performItemClick(AdapterView.java:292) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.widget.AbsListView.performItemClick(AbsListView.java:1173) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.widget.AbsListView$PerformClick.run(AbsListView.java:2701) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.widget.AbsListView$1.run(AbsListView.java:3453) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.os.Handler.handleCallback(Handler.java:605) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.os.Handler.dispatchMessage(Handler.java:92) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.os.Looper.loop(Looper.java:137) 11-20 10:27:47.047: E/AndroidRuntime(5078): at android.app.ActivityThread.main(ActivityThread.java:4514) 11-20 10:27:47.047: E/AndroidRuntime(5078): at java.lang.reflect.Method.invokeNative(Native Method) 11-20 10:27:47.047: E/AndroidRuntime(5078): at java.lang.reflect.Method.invoke(Method.java:511) 11-20 10:27:47.047: E/AndroidRuntime(5078): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:790) 11-20 10:27:47.047: E/AndroidRuntime(5078): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:557) 11-20 10:27:47.047: E/AndroidRuntime(5078): at dalvik.system.NativeStart.main(Native Method) MainActivity public class MainActivity extends Activity { public static final int DIALOG_DOWNLOAD_JSON_PROGRESS = 0; private ProgressDialog mProgressDialog; ArrayList<HashMap<String, Object>> MyArrList; @SuppressLint("NewApi") @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); // Permission StrictMode if (android.os.Build.VERSION.SDK_INT > 9) { StrictMode.ThreadPolicy policy = new StrictMode.ThreadPolicy.Builder().permitAll().build(); StrictMode.setThreadPolicy(policy); } // Download JSON File new DownloadJSONFileAsync().execute(); } @Override protected Dialog onCreateDialog(int id) { switch (id) { case DIALOG_DOWNLOAD_JSON_PROGRESS: mProgressDialog = new ProgressDialog(this); mProgressDialog.setMessage("Downloading....."); mProgressDialog.setProgressStyle(ProgressDialog.STYLE_SPINNER); mProgressDialog.setCancelable(true); mProgressDialog.show(); return mProgressDialog; default: return null; } } // Show All Content public void ShowAllContent() { // listView1 final ListView lstView1 = (ListView)findViewById(R.id.listView1); lstView1.setAdapter(new ImageAdapter(MainActivity.this,MyArrList)); lstView1.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> parent, View v, int position, long id) { HashMap<String, Object> hm = (HashMap<String, Object>) lstView1.getAdapter().getItem(position); String imagePath = (String) hm.get("photo"); Intent i = new Intent(MainActivity.this,FullImageActivity.class); i.putExtra("fullImage", imagePath); startActivity(i); } }); } public class ImageAdapter extends BaseAdapter { private Context context; private ArrayList<HashMap<String, Object>> MyArr = new ArrayList<HashMap<String, Object>>(); public ImageAdapter(Context c, ArrayList<HashMap<String, Object>> myArrList) { // TODO Auto-generated method stub context = c; MyArr = myArrList; } public int getCount() { // TODO Auto-generated method stub return MyArr.size(); } public Object getItem(int position) { // TODO Auto-generated method stub return position; } public long getItemId(int position) { // TODO Auto-generated method stub return position; } public View getView(int position, View convertView, ViewGroup parent) { // TODO Auto-generated method stub LayoutInflater inflater = (LayoutInflater) context .getSystemService(Context.LAYOUT_INFLATER_SERVICE); if (convertView == null) { convertView = inflater.inflate(R.layout.activity_column, null); } // ColImage ImageView imageView = (ImageView) convertView.findViewById(R.id.ColImgPath); imageView.getLayoutParams().height = 80; imageView.getLayoutParams().width = 80; imageView.setPadding(5, 5, 5, 5); imageView.setScaleType(ImageView.ScaleType.CENTER_CROP); try { imageView.setImageBitmap((Bitmap)MyArr.get(position).get("ImageThumBitmap")); } catch (Exception e) { // When Error imageView.setImageResource(android.R.drawable.ic_menu_report_image); } // ColImgID TextView txtImgID = (TextView) convertView.findViewById(R.id.ColImgID); txtImgID.setPadding(10, 0, 0, 0); txtImgID.setText("ID : " + MyArr.get(position).get("id").toString()); // ColImgName TextView txtPicName = (TextView) convertView.findViewById(R.id.ColImgName); txtPicName.setPadding(50, 0, 0, 0); txtPicName.setText("Name : " + MyArr.get(position).get("first_name").toString()); return convertView; } } // Download JSON in Background public class DownloadJSONFileAsync extends AsyncTask<String, Void, Void> { protected void onPreExecute() { super.onPreExecute(); showDialog(DIALOG_DOWNLOAD_JSON_PROGRESS); } @Override protected Void doInBackground(String... params) { // TODO Auto-generated method stub String url = "http://192.168.10.104/adchara1/"; JSONArray data; try { data = new JSONArray(getJSONUrl(url)); MyArrList = new ArrayList<HashMap<String, Object>>(); HashMap<String, Object> map; for(int i = 0; i < data.length(); i++){ JSONObject c = data.getJSONObject(i); map = new HashMap<String, Object>(); map.put("id", (String)c.getString("id")); map.put("first_name", (String)c.getString("first_name")); // Thumbnail Get ImageBitmap To Object map.put("photo", (String)c.getString("photo")); map.put("ImageThumBitmap", (Bitmap)loadBitmap(c.getString("photo"))); // Full (for View Popup) map.put("frame", (String)c.getString("frame")); MyArrList.add(map); } } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } return null; } protected void onPostExecute(Void unused) { ShowAllContent(); // When Finish Show Content dismissDialog(DIALOG_DOWNLOAD_JSON_PROGRESS); removeDialog(DIALOG_DOWNLOAD_JSON_PROGRESS); } } /*** Get JSON Code from URL ***/ public String getJSONUrl(String url) { StringBuilder str = new StringBuilder(); HttpClient client = new DefaultHttpClient(); HttpGet httpGet = new HttpGet(url); try { HttpResponse response = client.execute(httpGet); StatusLine statusLine = response.getStatusLine(); int statusCode = statusLine.getStatusCode(); if (statusCode == 200) { // Download OK HttpEntity entity = response.getEntity(); InputStream content = entity.getContent(); BufferedReader reader = new BufferedReader(new InputStreamReader(content)); String line; while ((line = reader.readLine()) != null) { str.append(line); } } else { Log.e("Log", "Failed to download file.."); } } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } return str.toString(); } /***** Get Image Resource from URL (Start) *****/ private static final String TAG = "Image"; private static final int IO_BUFFER_SIZE = 4 * 1024; public static Bitmap loadBitmap(String url) { Bitmap bitmap = null; InputStream in = null; BufferedOutputStream out = null; try { in = new BufferedInputStream(new URL(url).openStream(), IO_BUFFER_SIZE); final ByteArrayOutputStream dataStream = new ByteArrayOutputStream(); out = new BufferedOutputStream(dataStream, IO_BUFFER_SIZE); copy(in, out); out.flush(); final byte[] data = dataStream.toByteArray(); BitmapFactory.Options options = new BitmapFactory.Options(); //options.inSampleSize = 1; bitmap = BitmapFactory.decodeByteArray(data, 0, data.length,options); } catch (IOException e) { Log.e(TAG, "Could not load Bitmap from: " + url); } finally { closeStream(in); closeStream(out); } return bitmap; } private static void closeStream(Closeable stream) { if (stream != null) { try { stream.close(); } catch (IOException e) { android.util.Log.e(TAG, "Could not close stream", e); } } } private static void copy(InputStream in, OutputStream out) throws IOException { byte[] b = new byte[IO_BUFFER_SIZE]; int read; while ((read = in.read(b)) != -1) { out.write(b, 0, read); } } /***** Get Image Resource from URL (End) *****/ @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.activity_main, menu); return true; } } FullImageActivity String imagePath = getIntent().getStringExtra("fullImage"); if(imagePath != null && !imagePath.isEmpty()){ File imageFile = new File(imagePath); if(imageFile.exists()){ Bitmap myBitmap = BitmapFactory.decodeFile(imageFile.getAbsolutePath()); ImageView iv = (ImageView) findViewById(R.id.fullimage); iv.setImageBitmap(myBitmap); } }

  Read the article

• How to use HTTP Live Streaming protocol in iPhone SDk 3.0

  - by Pugal Devan

  Hi Guys, i have developed on IPhone application and submitted to App store. But my application got rejected based on below criteria. Thank you for submitting your yyyyyyyy application. We have reviewed your application and have determined that it cannot be posted to the App Store at this time because it is not using the HTTP Live Streaming protocol to broadcast streaming video. HTTP Live Streaming is required when streaming video feeds over the cellular network, in order to have an optimal user experience and utilize cellular best practices. This protocol automatically determines bandwidth available to users and adjusts the bandwidth appropriately, even as bandwidth streams change. This allows you the flexibility to have as many streams as you like, as long as 64 kbps is set as the baseline feed. In my apps i have to stream prerecorded m4v and mp3 files from my server. I used MPMoviePlayerController to stream and play those videos / audio. How to implement the HTTP Live Streaming Protocol in my apps? Also can i get some sample code? Thanks in advance!

  Read the article

• Bash scripting problem

  - by komidore64

  I'm writing a bash script to sync my iTunes music directory to a directory on a removable hard drive. The script works fine when there is absolutely nothing in the folder on the external hard drive. Once all files have been copied to the external drive, then the script begins to act strange. Even though i just sync'd everything over, it proceeds to recopy certain files again. After the initial sync, it chooses the same files to resync each consecutive time the script is executed without any changes being made to the source directory. #!/bin/bash # shell script to sync music with gigabeat and/or firewire drive musicdir="/Users/komidore64/Music/iTunes/iTunes Media/Music" gigadir="/Volumes/GIGABEAT/music" # fwdir="/Volumes/" remove() { find "$1" \ ! \( -name "*.wav" \ -o -name "*.ogg" \ -o -name "*.flac" \ -o -name "*.aac" \ -o -name "*.mp3" \ -o -name "*.m4a" \ -o -name "*.wma" \ -o -name "*.m4p" \ -o -name "*.ape" \ -o -type d \) \ -exec rm -i {} \; } if [ $# == 0 ]; then echo "no device argument present" echo "specify '-g' for gigabeat" echo "or '-f' for firewire drive" else remove "$musicdir" while [ $1 ]; do case $1 in -g | --gigabeat ) rsync --archive --verbose --delete "$musicdir/" "$gigadir" ;; -f | --firewire ) rsync --archive --verbose --delete "$musicdir/" "$fwdir" esac shift done echo "music synced" fi

  Read the article

• How to set the PlayList Index for Mediaplayer(ExpressionMediaPlayer:Mediaplayer)

  - by Subhen

  Hi, I have a Mediaplayer control on my XAML page like below: <CustomMediaElement:CustomMediaPlayer x:Name="custMediaElement" VerticalAlignment="Center" Width="600" Height="300" Visibility="Collapsed" /> Now I am ble to set the playList by using setPlayList() method like below: private void setPlayList() { IEnumerable eLevelData = null; eLevelData = pMainPage.GetDataFromDictonary(pMainPage.strChildFolderID); foreach (RMSMedia folderItems in eLevelData) { string strmediaURL = folderItems.strMediaFileName; if (hasExtension(strmediaURL) == "wmv" || hasExtension(strmediaURL) == "mp4" || hasExtension(strmediaURL) == "mp3" || hasExtension(strmediaURL) == "mpg") { PlaylistItem playListItem = new PlaylistItem(); string thumbSource = folderItems.strAlbumcoverImage; playListItem.MediaSource = new Uri(strmediaURL, UriKind.RelativeOrAbsolute); playListItem.Title = folderItems.strAlbumName; if (!string.IsNullOrEmpty(thumbSource)) playListItem.ThumbSource = new Uri(thumbSource, UriKind.RelativeOrAbsolute); playList.Items.Add(playListItem); } } custMediaElement.Playlist = playList; } Now , I want to change the PlayListIndex of Mediaplayer, when user clicks on a listBox Item , which contains the title of all the songs. When the user clicks on the third song title from the songs Title List the mediaPlayer should play the third song , or if the user cliks on 7th song title, the mediaPlayer should play the 7th song. My motto is to pick up the Selected index from the listbox and assign it to the PlayList Index of mediaPlayer. While I add a watch to playList I am able to see , playList , Items , [0] PlaylistIndex 1 playList , Items , [1] PlaylistIndex 2 But While I am trying to set it from the code , the same property PlaylistIndex seems unavailable. Please help. Thanks, Subhen

  Read the article

• Reading a WAV file into VST.Net to process with a plugin

  - by Paul

  Hello, I'm trying to use the VST.Net and NAudio frameworks to build an application that processes audio using a VST plugin. Ideally, the application should load a wav or mp3 file, process it with the VST, and then write a new file. I have done some poking around with the VST.Net library and was able to compile and run the samples (specifically the VST Host one). What I have not figured out is how to load an audio file into the program and have it write a new file back out. I'd like to be able to configure the properties for the VST plugin via C#, and be able to process the audio with 2 or more consecutive VSTs. Using NAudio, I was able to create this simple script to copy an audio file. Now I just need to get the output from the WaveFileReader into the VST.Net framework somehow. private void processAudio() { reader = new WaveFileReader("c:/bass.wav"); writer = new WaveFileWriter("c:/bass-copy.wav", reader.WaveFormat); int read; while ((read = reader.Read(buffer, 0, buffer.Length)) > 0) { writer.WriteData(buffer, 0, read); } textBox1.Text = "done"; reader.Close(); reader.Dispose(); writer.Close(); writer.Dispose(); } Please help!! Thanks References: http://vstnet.codeplex.com (VST.Net) http://naudio.codeplex.com (NAudio)

  Read the article

• SoundManager2 has irregular latency

  - by Stefan Monov

  I'm playing some notes at regular intervals. Each one is delayed by a random number of milliseconds, creating a jarring irregular effect. How do I fix it? Note: I'm OK with some latency, just as long as it's consistent. Answers of the type "implement your own small SoundManager2 replacement, optimized for timing-sensitive playback" are OK, if you know how to do that :) but I'm trying to avoid rewriting my whole app in flash for now. For an example of app with zero audible latency see the flash-based ToneMatrix. Testcase (see it here live or get it in an zip): <head> <title></title> <script type="text/javascript" src="http://www.schillmania.com/projects/soundmanager2/script/soundmanager2.js"> </script> <script type="text/javascript"> soundManager.url = '.' soundManager.flashVersion = 9 soundManager.useHighPerformance = true soundManager.useFastPolling = true soundManager.autoLoad = true function recur(func, delay) { window.setTimeout(function() { recur(func, delay); func(); }, delay) } soundManager.onload = function() { var sound = soundManager.createSound("test", "test.mp3") recur(function() { sound.play() }, 300) } </script> </head> <body> </body> </html>

  Read the article

• How to parse the "<media:group>" using feedparser?

  - by Wayle.C

  The rss file is shown as below, i want to get the content in section media:group . I check the document of feedparser, but it seems not mention this. How to do it? Any help is appreciated. XYZ InfoX: Special hello http://www1.XYZInfoX.com/learninghello/home hello en Wed, 17 Mar 2010 08:50:06 GMT 2010-03-17T08:50:06Z en Voice of America http://www1.XYZInfoX.com/learninghello http://media.XYZInfoX.com/designimages/XYZRSSIcon.gif <item> <title>Who Were the Deadliest Gunmen of the Wild West?</title> <link>http://www1.XYZInfoX.com/learninghello/home/Deadliest-Gunmen-of-the-Wild-West-87826807.html</link> <description> The story of two of them: "Killin'" Jim Miller was an outlaw, "Texas" John Slaughter was a lawman | EXPLORATIONS </description> <pubDate>Wed, 17 Mar 2010 00:38:48 GMT</pubDate> <guid isPermaLink="false">87826807</guid> <dc:creator></dc:creator> <dc:date>2010-03-17T00:38:48Z</dc:date> *<media:group> <media:content url="http://media.XYZInfoX.com/images/archives_peace_comm_480_16mar_se.jpg" medium="image" isDefault="true" height="300" width="480" /> <media:content url="http://media.XYZInfoX.com/images/archives_peace_comm_230_16mar_se_edited-1.jpg" medium="image" isDefault="false" height="230" width="230" /> <media:content url="http://media.XYZInfoX.com/images/tex_trans_lawmans_230_16mar10_se.jpg" medium="image" isDefault="false" height="230" width="230" /> <media:content url="http://www.XYZInfoX.com/MediaAssets2/learninghello/dalet/se-exp-outlaws-part2-17mar2010.Mp3" type="audio/mpeg" medium="audio" isDefault="false" /> </media:group>* </item>

  Read the article

• what is the best way to stream a audio file to website users/listners

  - by Naveen Chamikara Gamage

  I'm developing a music site which will stream audio files stored in a server to users, audio files will be played through flash player placed in a webpage.. As I heard I need to use a streaming media server for streaming audio files ( like 2mb to 3mb in size).. Do I need to use one? I found some streaming media server softwares like http://www.icecast.org - but as in their documentation, It is used for streaming radio stations and live streaming purposes, but I just need to stream audio files faster and in low size (low bandwidth) with good quality.. I heard I need to encode the audio files first and then send them to listeners and in their end audio files need to be decoded again. Is that true? How can I do that? if I need to use a special web server, where should I host my files? Any good hosting providers? if I host audio files in a normal web server, they will use HTTP or TCP to deliver my audio files to users/ listners but I found that HTTP and TCP are not good ways to use for multi media purposes like streaming audio and video files, and they are used for delivering HTML and stuff. I found I should use RSTP or UDP for streaming audio files.. What should I use? I know that .MP3 files has much better quality than the other formats but it also gives huge size to the audio files.. which format should I use for audio files? Most of the best quality audio files are more than 7mb so I'm planning to convert them my self using a software so I could get low size files with some level of good quality. If I'm converting my audio files what is the good BITRATE I should use for my files? Any known best softwares for converting audio files while keeping quality in a good level? Note** - I know that I will not need complex requirements at the beginning of the site but I wanted to what are the best ways like they are using for soundcloud.com

  Read the article

• PInvokeStackImbalance was detected when manually running Xna Content pipeline

  - by Miau

  So I m running this code static readonly string[] PipelineAssemblies = { "Microsoft.Xna.Framework.Content.Pipeline.FBXImporter" + XnaVersion, "Microsoft.Xna.Framework.Content.Pipeline.XImporter" + XnaVersion, "Microsoft.Xna.Framework.Content.Pipeline.TextureImporter" + XnaVersion, "Microsoft.Xna.Framework.Content.Pipeline.EffectImporter" + XnaVersion, "Microsoft.Xna.Framework.Content.Pipeline.XImporter" + XnaVersion, "Microsoft.Xna.Framework.Content.Pipeline.AudioImporters" + XnaVersion, "Microsoft.Xna.Framework.Content.Pipeline.VideoImporters" + XnaVersion, }; more code in between ..... // Register any custom importers or processors. foreach (string pipelineAssembly in PipelineAssemblies) { _buildProject.AddItem("Reference", pipelineAssembly); } more code in between ..... var execute = Task.Factory.StartNew(() => submission.ExecuteAsync(null, null), cancellationTokenSource.Token); var endBuild = execute.ContinueWith(ant => BuildManager.DefaultBuildManager.EndBuild()); endBuild.Wait(); Basically trying to build the content project with code ... this works well if you remove XImporter, AudioIMporters and VideoImporters but with those I get the following error: PInvokeStackImbalance was detected Message: A call to PInvoke function 'Microsoft.Xna.Framework.Content.Pipeline!Microsoft.Xna.Framework.Content.Pipeline.UnsafeNativeMethods+AudioHelper::GetFormatSize' has unbalanced the stack. This is likely because the managed PInvoke signature does not match the unmanaged target signature. Check that the calling convention and parameters of the PInvoke signature match the target unmanaged signature. Things I've tried: turn unsafe code on adding a lot of logging (the dll is found in case you are wondering) different wav and Mp3 files (just in case) Will update...

  Read the article

• Can a single developer still make money with shareware?

  - by Wouter van Nifterick

  I'm wondering if the shareware concept is dead nowadays. Like most developers, I've built up quite a collection of self-made tools and code libraries that help me to be productive. Some examples to give you an idea of the type of thing I'm talking about: A self-learning program that renames and orders all my mp3 files and adds information to the id3 tags; A Delphi component that wraps the Google Maps API; A text-to-singing-voice converter for musical purposes; A program to control a music synthesizer; A Gps-log <- KML <- ESRI-shapefile converter; I've got one of these already freely downloadable on my website, and on average it gets downloaded about a 150 times per month. Let's say I'd start charging 15 euro's for it; would there actually be people who buy it? How many? What would it depend on? If I could get some money for some of these, I'd finish them up a bit and put them online, but without that, I probably won't bother. Maintaining a SourceForge project is not very rewarding by itself. Is there anyone who is making money with shareware? How much? Any tips?

  Read the article

• Testing background audio in the simulator

  - by Cactuar

  I'm experimenting with the new background audio service in iPhone OS 4.0 but I can't get it to work in the simulator. According to this page: iPhone Application Programming Guide: Executing Code in the Background it seems that all I have to do is add the a UIBackgroundModes key with an array containing audio to my Info.plist file and the audio my application plays should automatically continue when I switch to another app. I have done this but the audio still pauses as I switch to another app, when I switch back it continues where it left off. This is the code I'm using to play the sound: NSURL *url = [NSURL fileURLWithPath:[NSString stringWithFormat:@"%@/audio.mp3", [[NSBundle mainBundle] resourcePath]]]; NSError *error; audioPlayer = [[AVAudioPlayer alloc] initWithContentsOfURL:url error:&error]; audioPlayer.numberOfLoops = -1; if (audioPlayer == nil) NSLog(@"%@", [error userInfo]); else [audioPlayer play]; Has anyone gotten this to work? Could it be that it would work on an actual device and it's just a problem with the simulator? I'm a bit hesitant to install 4.0 on my phone since I've heard it's still very buggy. Wish I had another device to use only for development.

  Read the article

• SoundManager / Jquery : Get SoundID sID

  - by j-man86

  So I am trying to access a jquery soundmanager variable from one script (wpaudio.js – from the wp-audio plugin) inside of another (init.js – my own javascript). I am creating an alternate pause/play button higher up on the page and need to resume the current soundID, which is contained as part of a class name in the DOM. Here is the code that creates that class name in wpaudio.js: function wpaButtonCheck() { if (!this.playState || this.paused) jQuery('#' + this.sID + '_play').attr('src', wpa_url + '/wpa_play.png'); else jQuery('#' + this.sID + '_play').attr('src', wpa_url + '/wpa_pause.png'); } Here is the output: <img src="http://24.232.185.173/wordpress/wp-content/plugins/wpaudio-mp3-player/wpa_play.png" class="wpa_play" id="wpa0_play"> where wpa0 would be the sID of the sound I need. My current script in init.js is: $('.mixesSidebar #currentSong .playBtn').toggle(function() { soundManager.pauseAll(); $(this).addClass('paused'); }, function() { soundManager.resumeAll(); $(this).removeClass('paused'); }); I need to change resumeAll to "resume(this.sID)", but I need to somehow store the sID onclick and call it in the above function. Alternately, I think a regular expression that could get the class name of the current play button and either parse the string up to the "_play" or use a trim function to get rid of "_play"– but I'm not sure how to do this. Thanks for your help!

  Read the article

• Flash AS3 load file xml

  - by Elias

  Hello, I'm just trying to load an xml file witch can be anywere in the hdd, this is what I have done to browse it, but later when I'm trying to load the file it would only look in the same path of the swf file here is the code package { import flash.display.Sprite; import flash.events.; import flash.net.; public class cargadorXML extends Sprite { public var cuadro:Sprite = new Sprite(); public var file:FileReference; public var req:URLRequest; public var xml:XML; public var xmlLoader:URLLoader = new URLLoader(); public function cargadorXML() { cuadro.graphics.beginFill(0xFF0000); cuadro.graphics.drawRoundRect(0,0,100,100,10); cuadro.graphics.endFill(); cuadro.addEventListener(MouseEvent.CLICK,browser); addChild(cuadro); } public function browser(e:Event) { file = new FileReference(); file.addEventListener(Event.SELECT,bien); file.browse(); } public function bien(e:Event) { xmlLoader.addEventListener(Event.COMPLETE, loadXML); req=new URLRequest(file.name); xmlLoader.load(req); } public function loadXML(e:Event) { xml=new XML(e.target.data); //xml.name=file.name; trace(xml); } } } when I open a xml file that isnt it the same directory as the swf, it gives me an unfound file error. is there anything I can do? cause for example for mp3 there is an especial class for loading the file, see http://www.flexiblefactory.co.uk/flexible/?p=46 thanks

  Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >