Search Results

Search found 18976 results on 760 pages for 'ash machine'.

Page 201/760 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Graphics card failure, anything I could try...

  - by ILMV

  My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

  Read the article

• Booting from a USB drive that was originally a boot drive

  - by daveh551

  When Win 7 went RTM, I upgraded my laptop from XP. But to protect myself against the possibility of having data inaccessible, I got a new disk and put it in the laptop, and took the old (XP) disk and put it in a USB enclosure. I have no trouble accessing the data on the USB drive under Windows 7. But I would like to be able to plug it in, tell the BIOS to boot from the USB drive, and be back on my old machine. The laptop is a Dell Precision M90, and it has a boot from USB option in its boot menu. But when I try to do that, it does read the drive, gets as far as putting up the Windows XP splash screen and starting the boot progress bar, and then reboots. What do I need to do to the old disk now running on USB to allow the machine to boot from it?

  Read the article

• SCVMM upgrade scenario

  - by pigeon

  I've read some information on TechNet about upgrading SCVMM 2008 - 2012 but can't quite figure out the best way to approach this. The current setup is that we've got SCVMM 2008 R2 installed but against best practice it was actually installed on the Hyper-V host machine since its a small scale deployment its just a single server setup with SCVMM existing on the same host rather than be in a VM. So from what I've read an in-place should be possible which will incur a restart but also don't have the luxury of another server to shift the VMs onto whilst doing this or want to risk anything happening to the Hyper-V role. Ideally I would probably prefer just to get SCVMM 2012 into a VM of its own and remove the 2008 version from the host machine. Anyone done an upgrade on this or have any recommendations about how to approach this?

  Read the article

• Vim and mouse with ssh from Mac to Linux

  - by Jonatan Littke

  Hey. I certainly know it's possible to make the mouse work in Vim on a remote session to a Linux machine from my Mac, but I haven't figured out just how. Daily vim gives a tip on making it work but if I try to set 'mac-ansi', for example, I get an error saying I can only specify values beginning with builtin_ (riscos, beos-ansi, etc). I've tried using ssh -X, combined with set mouse=a and set term=builtin_anso for example, but with no success with or without combining them. I'm using Snow Leopard and attempting to use the mouse on a Debian machine with vim 7.1.314. I've had a look at the documentation but can't make it work. Any tips?

  Read the article

• How to make Linux reliably boot on multi-cpu machines?

  - by Adam Tabi

  I've got two machines, one with 4x12 AMD Opteron cores (AMD Opteron(tm) Processor 6176), one with 2x8 Xeon cores (HT disabled; Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz). On both machines I experience difficulties during boot of Linux using recent kernels. The system hangs during the initialization of the kernel, before or just when initramfs started initializing the hardware. The last thing which got displayed was a stacktrace like this: CPU: 31 PID: 0 Comm: swapper/31 Tainted: G D 3.11.6-hardened #11 Hardware name: Supermicro X9DRT-HF+/X9DRT-HF+, BIOS 3.00 07/08/2013 task: ffff880854695500 ti: ffff880854695a28 task.ti: ffff880854695a28 RIP: 0010:[<ffffffff8100a82e>] [<ffffffff8100a82e>] default_idle+0x6/0xe RSP: 0000:ffff8808546b3ec8 EFLAGS: 00000286 RAX: ffffffff8100a828 RBX: ffff880854695a28 RCX: 00000000ffffffff RDX: 0100000000000000 RSI: 0000000000000000 RDI: ffff88107fdec690 RBP: ffff8808546b3ec8 R08: 0000000000000000 R09: ffff880854695500 R10: ffff880854695500 R11: 0000000000000001 R12: ffff880854695a28 R13: ffff880854695a28 R14: ffff880854695a28 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fde0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000002b43256a960 CR3: 00000000016b5000 CR4: 00000000000607f0 Stack: ffff8808546b3ed8 ffffffff8100aec9 ffff8808546b3f10 ffffffff8109ce25 334ab55852ec7aef 000000000000001f ffffffff8102d6c0 0000000000000000 0000000000000000 ffff8808546b3f48 ffffffff810276e0 ffff8808546b3f28 Call Trace: [<ffffffff8100aec9>] arch_cpu_idle+0x20/0x2b [<ffffffff8109ce25>] cpu_startup_entry+0xed/0x138 [<ffffffff8102d6c0>] ? flat_init_apic_ldr+0x80/0x80 [<ffffffff810276e0>] start_secondary+0x2c9/0x2f8 I compiled the kernel myself and it works fine, if I boot with nolapic. Yet, only one core is used. Also, the kernel of RHEL6 seems to work fine. I suspect that there are some patches used to make things work. Using the kernel config file from RHEL6 and building a more recent kernel yields the same problems. On the Xeon machine, things got better by disabling Hyperthreading completely. The machine now boots successfully on at least 4 out of 5 times. And if it boots, multicore stuff works just fine. However, I'm wondering about what to do about the AMD machine. So to sum it up: Gentoo kernel 3.6 - 3.11 won't reliably boot those machines unless you reduce the amount of cores (e.g. via nolapic). RHEL6 kernel (which is 2.6.32) boots just fine. RH kernel config used to build a 3.x kernel won't yield a working kernel. Not distribution specific (apart from the kernel being used). These stack traces got printed every minute or so. The kernel seems to be stuck in an endless loop. Yet, a recent kernel is needed for various reasons. So the question is: What does the RHEL6 kernel do, what vanilla or gentoo kernels don't do? Is there a boot option that might lead to a reliable boot with all the cores enabled? Best, Adam

  Read the article

• Run a batch file silently, executed at remote desktop login

  - by ILMV

  In our office we are using Linux thin client machines, they work very well except the lack of IE, which is a pain because the corporations we deal with are too stupid to update their web apps (no flame wars please). To solve this problem we have machine in our computer room which users remote desktop into to access internet explorer, this is achieved by running a batch script which opens IE and when it closes logs them off, this setup works well for us. Even though I have @echo off and the cmd window isn't displaying anything, I would really like that batch file to be executed silently, so the cmd window doesn't appear at all. Is this possible? The Ubuntu terminal server client has an option to launch a file / app at login, is there a command I can use to run this batch silently. I have tried these: C:\my_batch.bat /NOCONSOLE C:\my_batch.bat /NOWINDOW C:\my_batch.bat /B C:\my_batch.bat /Q ...with no success, perhaps it's the way I am doing it? Cheers :-) Edit The remote desktop platform is a Windows XP machine, nothing entirely special but not a Windows Server setup.

  Read the article

• Monitor HTTP usage on network from Linux free

  - by David

  I manage a small office network. I am looking to start monitoring/logging internet usage (website requests) for each user on a small network. All the windows clients are running through a switch to a BT router. I also have a linux (centos) machine which is connected as a client to the BT router as well. Is there any free software I can install on the linux box (or my own machine) to allow me to log and monitor websites requested by users kind of like browser history. Ideally, something that would collect each client's browser history in 1 place. Thanks

  Read the article

• Keep your Root Authorities up to date

  - by John Breakwell

  Originally posted on: http://geekswithblogs.net/Plumbersmate/archive/2013/06/20/keep-your-root-authorities-up-to-date.aspxBy default, Windows will automatically update it’s internal list of trusted root authorities as long as the Update Root Certificates function is installed. This should be enabled by default and takes manual intervention to remove it. With this component enabled, the following happens: If you are presented with a certificate issued by an untrusted root authority, your computer will contact the Windows Update Web site to see if Microsoft has added the CA to its list of trusted authorities. If it has been added to the Microsoft list of trusted authorities, its certificate will automatically be added to your trusted certificate store. If the component is not installed and a certificate from an untrusted CA is encountered then the following text will be seen: This is an inconvenience for the person browsing the site as they need to click to continue. Applications, though, will be unable to proceed and will throw an exception. Example: ERROR_WINHTTP_SECURE_FAILURE 12175 (0x00002F8F) One or more errors were found in the Secure Sockets Layer (SSL) certificate sent by the server. If you look at the certificate’s properties, you can see the “Issued by:” value:   This must match a Trusted Root Certificate Authority in the current user’s certificate store.   So turn on automatic updating of trusted root authority certificates. For Windows Vista and above, this option is controlled through Group Policy. See the “To Turn Off the Update Root Certificates Feature by Using Group Policy” section of the following Technet article: Certificate Support and Resulting Internet Communication in Windows Vista If Windows Update is a blocked site then download and deploy the latest pack of root certificates from Microsoft: Update for Root Certificates For Windows XP [May 2013] (KB931125)   Failing that, find a machine that has the latest root certificates installed and export them from there: Open up the Certificates console. Right-click the required Trusted Root Certificate Authority certificate Choose Export from “All Tasks” to open up the Certificate Export Wizard Choose an export file format – DER should be fine Provide a file name and complete the export. Move the file to the machine that’s missing the certificate Right-click the file and choose “Install Certificate” to open up the Certificate Import Wizard Allow the wizard to automatically select the certificate store and complete the import On a side note, for troubleshooting certificate issues it can be helpful to clear the SSL state:

  Read the article

• Sending mail in localhost:25 with Ssmtp

  - by Juan

  I already have Ssmtp installed and working in a Centos 5.7 machine with Gmail configured. I can send mails in th shell without problems. Now i want to use the ssmtp to allow a web app (installed in the same machine) to send mails but for do this i have to find a way to ssmtp "hears" in the port 25 (or any other). There is a way to do this? There is another simple alternative to ssmtp who allows to send mail using localhost:25? Thanks.

  Read the article

• VMWare Headphone Issue

  - by Ash_Geek_Pickney

  I am running VMWare Workstation Version 7 on a Windows 7 partition on a Macbook Pro. I have built a virtual XP machine within vmware to run some old music programs. The sound from my virtual machines comes out of my macbook speakers but the volume is not controllable using my macbook volume controls, only by using the volume control on the XP machine. My problem is that i need to use headphones, and when i plug a headphone jack into my macbook, the sound from my vmware virtual machines still comes out of the macbook speakers. I am baffled. Please help. Thanks in advance...

  Read the article

• gnu screen - mouse does not work in nested screen session

  - by Matthew

  I started a screen session inside another screen session, both on my local machine. This is using cygwin, but I don't think it matters. I have tried via ssh to a real unix machine but the behaviour is the same. Mouse works great in the first screen session, I'm able to open vim with :set mouse=a and I can click to move the cursor or switch tabs, and the mouse wheel scrolls. But in the nested session it does not work, mouse is only useful for selecting terminal text that gets put in the clipboard, but is not able to interact with vim. I want this to work because I usually work with a local screen session, then ssh to a remote server and have a remote screen session running too (hence the nesting) and I like to scroll swiftly in vim by using the mouse wheel. Can anyone tell me why the mouse works in the first layer of screen but not in the second, nested screen session, and how I can make it work? Thanks in advance, Matthew

  Read the article

• Linux Disk Setup for VMs

  - by zjherner

  Been trying to find the ideal way to setup disks/partitions for Linux guests on ESXi. Seems as though Linux is falling behind when it comes easily adding disk space. The end goal is to be able to add disk space to a Linux server without rebooting the server or taking the server offline. Ideally, I would expect adding disk to a Linux machine should be as easy as adding disk space to a Windows machine. I expand the vmdk file from vSphere Open disk mangler find the disk and extend volume. Would have to use command line tools in linux which is no big deal, but I haven't been able to find a solid way to exand filesystems on the fly. What is everyone else using for disk setups on their linux guests? Has anyone been able to acheive adding storage space to linux without downtime? Can it be done without using lvm?

  Read the article

• Virtual PC and hardware-assisted virtualization (VT-x) problem

  - by Vesa Huovi

  I've installed Microsoft's Virtual PC on Windows 7, but when I try to start a virtual machine I get the following error message: '<Virtual machine name' could not be started because hardware-assisted virtualization is disabled. Please enable hardware virtualization in the BIOS settings and try again. If hardware virtualization settings is already enabled, you may have to disable Trusted Execution Technology (TXT) setting in BIOS or update the system BIOS. However, if I download and run the Hardware-Assisted Virtualization Detection Tool, it gives the following positive message: This computer is configured with hardware-assisted virtualization. This computer meets the processor requirements to run Windows Virtual PC. If this computer runs a supported edition of Windows® 7, you can install Windows Virtual PC. I've also used the MSR Walker in the third-party utility CrystalCPUID to examine MSR 0x3a on both processors on my system, and it's 0x5 (0x4 = VT enabled, 0x1 = VT lock), as expected. Does anyone have any ideas of what else to check? Thanks.

  Read the article

• Windows 7 User / Documents and Settings folders

  - by Kip

  Yo, I have a machine - Windows 7, nothing remarkable about the install but i have multiple drives in the machine. I have a c:\users\username folder which seems to be current and is the one that all windows properties point to. However, i also have a f:\documents and settings\username folder (which was hidden) which is also current and up to date. If i edit anything from either, they seem to "replicate" or update each other ie if i rename an icon on my desktop, it renames it in c:\users\username\desktop and f:\documents and settings\username\desktop. Likewise if i edit directly in one of those folders, it does the same to the other. Any one got any ideas what might cause this? Problem i have is that I need to remove the f drive all together! Thanks in advance

  Read the article

• Restrict access to ESXi

  - by kdl

  What is the best option to restrict access to ESXi machine so that it could be managed using VSphere client from only certain hosts? I know there is no built-in firewall and everyone recommends placing an ESXi machine behind a firewall, but when this is not an option... Is there any other option like using hosts.allow/deny or anything else? Or I better use ESX instead of ESXi? Edit: In the given circumstances, I am not able to add any additional hardware or use things like managed switches.

  Read the article

• Round-up: Embedded Java posts and videos

  - by terrencebarr

  I’ve been collecting links to some interesting blog posts and videos related to embedded Java over the last couple of weeks. Passing  these on here: Freescale blog – The Embedded Beat: “Let’s make it real – Internet of Things” Simon Ritter’s blog: “Mind Reading with Raspberry Pi” NightHacking with Steve Chin and Terrence Barr: “Java in the Internet of Things” NightHacking with Steve Chin and Alderan Robotics: “The NAO Robot” Java Magazine: “Getting Started with Java SE for embedded devices on Raspberry Pi” OTN video interview: “Java at ARM TechCon” OPN Techtalk with MX Entertainment: “Using Java and MX’s GrinXML Framework to build Blu-ray Disc and media applications” Oracle PartnerNetwork Blog: “M2M Architecture: Machine to Machine – The Internet of Things – It’s all about the Data” YouTube Java Channel: “Understanding the JVM and Low Latency Applications” Cheers, – Terrence Filed under: Mobile & Embedded Tagged: blog, iot, Java, Java Embedded, Raspberry Pi, video

  Read the article

• Full speed internal switch bandwidth but per-port set external bandwidth?

  - by garg

  I am in an environment where all the machines are behind a switch that I don't have access to. Each ethernet wall port has limited bandwidth depending on how much has been paid for each port. The problem is that some people have 10Mbps connections and some have 100Mbps connections and this causes problems with local intranet file transfers and operating system/software deployments. Operating systems can take hours to be deployed if the machine is on 10mbps. Do you know if it is possible with most switches to set a rule that would limit bandwidth coming in/going out to an extranet, but keep full bandwidth if the packets are destined to go to a local machine? For example, the internet might be limited to 10Mbps, but internal servers would get gigabit speeds? Thanks

  Read the article

• Failures when copying between two external drives on the same controller

  - by Krzysztof Kosinski

  I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

  Read the article

• NIS client cannot find NIS server (Opensuse)

  - by Tony

  I installed NIS server on head node of a virtual cluster(VirtualBox). One of the node (let's say node-1) can find NIS server and work with it, but another node (node-2) just can't find the NIS server in Yast while it can ping and ssh to both head node and node-1. BTW, all the nodes are VMs, head node and node-1 are on the same physical machine, node-2 is on another physical machine. I set the domain name in /etc/hosts and /etc/yp.conf, and ypwhich sometimes gives the correct domainname several minutes later complains about "ypwhich: Can't communicate with ypbind", and will back to work after some time. Also tried rpcinfo -p hostname and it worked as expected. I almost tried every thing I can find on internet, but seems that not many people had this problem. Any help would be very appreciated.

  Read the article

• Round-up: Embedded Java posts and videos

  - by terrencebarr

  I’ve been collecting links to some interesting blog posts and videos related to embedded Java over the last couple of weeks. Passing  these on here: Freescale blog – The Embedded Beat: “Let’s make it real – Internet of Things” Simon Ritter’s blog: “Mind Reading with Raspberry Pi” NightHacking with Steve Chin and Terrence Barr: “Java in the Internet of Things” NightHacking with Steve Chin and Alderan Robotics: “The NAO Robot” Java Magazine: “Getting Started with Java SE for embedded devices on Raspberry Pi” OTN video interview: “Java at ARM TechCon” OPN Techtalk with MX Entertainment: “Using Java and MX’s GrinXML Framework to build Blu-ray Disc and media applications” Oracle PartnerNetwork Blog: “M2M Architecture: Machine to Machine – The Internet of Things – It’s all about the Data” YouTube Java Channel: “Understanding the JVM and Low Latency Applications” Cheers, – Terrence Filed under: Mobile & Embedded Tagged: blog, iot, Java, Java Embedded, Raspberry Pi, video

  Read the article

• TeamViewer cannot connect

  - by Cetin Sert

  Last week I decided to use TeamViewer VPN to administer software on a server behind a firewall using RemoteDesktop. It was easy to configure to start-up with the system and make VPN available on the other side but now it fails to connect at the step shown below: The remote machine is running Windows Server 2008 R2. Is there a native way to circumvent the external firewall using a server role or feature to make Windows Server do the VPN work? Do people have better / more reliable experiences with other products such as Hamachi? The requirements are as follows: Start at remote system start-up time Make VPN connections to the remote machine possible

  Read the article

• Help about NAT with virtual server

  - by Thanh Tran

  I have a dedicated server running Linux CentOS 5.3 with 2 IP addresses. I've installed a virtual machine using VMware Server. The host and the guest have a host-only network. Now I want to map the 2nd IP address to the virtual machine so that it can run as a second dedicated server for me. Here is what I do: modprobe iptable_nat echo "1" > /proc/sys/net/ipv4/ip_forward iptables -t filter -A FORWARD -s 192.168.78.128 -d 64.85.164.184 -j ACCEPT iptables -t nat -A PREROUTING -d 64.85.164.184 -i eth0 -j DNAT --to-destination 192.168.78.128 iptables -t nat -A POSTROUTING -s 192.168.78.128 -o eth0 -j SNAT --to-source 64.85.164.184</p> But it not working as intended. What is the matter?

  Read the article

• ssh port forwarding / security risk

  - by jcooper

  Hi there, I want to access a web application running on a web server behind my office firewall from an external machine. We have a bastion host running sshd that is accessible from the Internet. I want to know if this solution is a bad idea: Create an account on the bastion host with shell=/bin/false and no password ('testuser') Create a ssh RSA key on the external machine Add the public RSA key to the testuser's authorized_keys file ssh to the bastion host from the external host using: ssh -N 8888:targethost:80 run my tests from the external host shut down the ssh tunnel I understand that if my RSA private key were compromised then someone could ssh to the bastion host. But are there other reasons this solution is a bad idea? thank you!

  Read the article

• RemoteApp cannot connect to webapp

  - by user58505

  I have just set up a Server 2008 R2 machine with Remote Desktop Services. It's all running on the one server, just for a single application, which works fine locally and when using Remote Desktop Web Access on the local network. However, when accessing it over the Internet, you can log on to RD Web Access fine, but when running the RemoteApp you get the message: RemoteApp Disconnected The remote computer could not be found. Please contact your helpdesk about this error. The application and all Remote Desktop services are on a single machine. I have purchased and installed a GoDaddy Cert. It works like a charm in the local network, but I get the above message when trying to access through rdweb How can I enable the RemoteApp to function outside the local network? I think there is one or 2 steps I left out??.. Please help...

  Read the article

• Tool to monitor file size, file existence, parse xml, etc

  - by Artur Carvalho

  I'm trying to find some tool that helps me monitor several things. What are some requirements: Shows results on a web page. Checks existence of files/folders Checks sizes of files/folders Can parse xml files Can have several status depending if it's for instance, after 9pm Ping workstations/Servers to ensure they are on or off create daily/weekly/monthly reports (pdf, html, csv) show daily/weekly/monthly scheduled tasks check if specific users are logged in a machine check which users are logged in in a machine I've looked into some solutions but could not find what I wanted. Usually tools like nagios are more focused in servers, and spiceworks is not so specific. At this point I'm using a little powershell script that does several of these items, but before losing more time probably reinventing the wheel, what tools are out there? Thank you in advance.

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >