auxilliary storage - Page 201

How to install missing Sound Drivers in Ubuntu?

- by Sakamoto Kazuma

I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

Read the article

Is Samba Server what I'm looking for, and if so, what do I need? (currently on DD-WRT Micro)

- by Anthony

I am really confused as to what Samba actually does and how it works. Here's what I'm hoping it does: I set up a Samba server on my LAN, and everyone will be able to see each other's shared files and swap them. But some of the documentation makes it sound like it will just allow Mac/Linux computers to see Windows computers. Other bits of the documentation make it sound more like a local server, where a Linux machine would install Samba and they would see everyone and be visible to everyone, but that won't change if anybody else can see each other. While still other things I've read make it seem more like a file-server, where everyone sees each other but file transfers are not peer-to-peer but instead need a host disk for files to act as go between. So, assuming I'm even in the right ballpark of what Samba does in terms of my goal of total cross-visibility on the network, I am left with needing to know what I'd need to set up the server and whether it can be done and is worth it... DD-WRT's article on Samba is a bit ambiguous. One second it sounds as if I can run the server on micro as long as it's set up on a usb drive, but then it also sounds like micro can't run it at all, etc. If I can run it from a usb-connected drive, I still need to know if the files are actually stored on that drive. The dd-wrt article mentions: You can run a Samba server on your main computer and run a client on your router (thus gaining writable storage for the router) or you can use Samba to share a drive connected (typically by USB) to the router among all the computers connected to your network. That one part "to share a drive...among all the computers" makes it sound like the only benefit I get from Samba is a share drive that any OS on the network can see, but they still won't see each other. But I'm very hopeful I'm misreading this. If the computers can see each other but still need the disk, how much space is generally a good idea? I'm basing this on the idea that the drive is a temporary store point. Obviously I'd have to get a drive big enough to store everything people wanted to share if the drive is a full-on file server. If I do have this all wrong, is there any software that achieves what I have in mind? Something that connects to the main router to bridge all clients?

Read the article

How to get physical partition name from iSCSI details on Windows?

- by Barry Kelly

I've got a piece of software that needs the name of a partition in \Device\Harddisk2\Partition1 style, as shown e.g. in WinObj. I want to get this partition name from details of the iSCSI connection that underlies the partition. The trouble is that disk order is not fixed - depending on what devices are connected and initialized in what order, it can move around. So suppose I have the portal name (DNS of the iSCSI target), target IQN, etc. I'd like to somehow discover which volumes in the system relate to it, in an automated fashion. I can write some PowerShell WMI queries that get somewhat close to the desired info: PS> get-wmiobject -class Win32_DiskPartition NumberOfBlocks : 204800 BootPartition : True Name : Disk #0, Partition #0 PrimaryPartition : True Size : 104857600 Index : 0 ... From the Name here, I think I can fabricate the corresponding name by adding 1 to the partition number: \Device\Harddisk0\Partition1 - Partition0 appears to be a fake partition mapping to the whole disk. But the above doesn't have enough information to map to the underlying physical device, unless I take a guess based on exact size matching. I can get some info on SCSI devices, but it's not helpful in joining things up (iSCSI target is Nexenta/Solaris COMSTAR): PS> get-wmiobject -class Win32_SCSIControllerDevice __GENUS : 2 __CLASS : Win32_SCSIControllerDevice ... Antecedent : \\COBRA\root\cimv2:Win32_SCSIController.DeviceID="ROOT\\ISCSIPRT\\0000" Dependent : \\COBRA\root\cimv2:Win32_PnPEntity.DeviceID="SCSI\\DISK&VEN_NEXENTA&PROD_COMSTAR... Similarly, I can run queries like these: PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_TargetClass PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_PersistentDevices These guys return information relating to my iSCSI target name and the GUID volume name respectively (a volume name like \\?\Volume{guid-goes-here}), but the GUID volume name is no good to me, and there doesn't appear to be a reliable correspondence between the target name and the volume that I can join on. I simply can't find an easy way of getting from an IQN (e.g. iqn.1992-01.com.example:storage:diskarrays-sn-a8675309) to physical partitions mapped from that target. The way I do it by hand? I start Disk Management, and look for a partition of the correct size, verify that its driver says NEXENTA COMSTAR, and look at the disk number. But even this is unreliable if I have multiple iSCSI volumes of the exact same size. Any suggestions?

Read the article

hyperv machine guest loads slow

- by Dani Avni

this is by far one of the strangest things I have seen. I have a win 2008R2 cluster with a CSV. the CSV itself is on an iSCSI storage (hitachi HUS 110) basic config of the two hosts in the cluster is Dell R610 Win 2008 R2 with all patches 64GB 1 NIC for host access 2 NICs for guest access 2 NICs for iSCSI these machine work great and I can load a 2008R2 test guest machine on them in less than 90 seconds after the above config is running for over a year, I now need to add a new host. now the host is Dell R620 (Still intel but different CPU) Win 2008 R2 with all patches 64GB 1 NIC for host access 2 NICs for guest access 2 NICs for iSCSI I added this new host to the domain and to the cluster, I gave it access to the CSV and I tried loading the same guest machine that loads in 90 seconds in the other hosts. the machine loads in about 6 minutes. no matter how many times I try this the old hosts load the machine in about 90 seconds and this new host in around 6 minutes to eliminate any problems with the iSCSI connection, I added a new LUN and directly accessed it from the new host and I was working at around 300MB/s so no problem there. I also tested the connection between the other hosts and the new one and network is working fine there too. to eliminate problems in HyperV, I copied the machine to the local disk of the new host and it loaded in less than 20 seconds. now is the point were things get a lot stranger: in my tests I tried installing a fresh windows guest machine to the CSV from the new host. I noticed that while the fresh windows was installing, my test guest was loading in less than 90 seconds even on the new host (I repeated this a few times). If I paused the fresh install guest and tried loading the test guest again it loaded in 6 minutes. and again after I resumed the guest installation the test guest loaded fast. after the fresh windows was also loaded, I ran tests loading the fresh window and my test machine. each one of them loaded in about 5 minutes when I tried loading them separately. however when I started both of them in the same time they both loaded in around 2.5 minutes it seems that the iSCSI disk access is only working if it is under some load (although I never got to above 10% utilization according to the task manager) does anyone have any idea what could be the problem?

Read the article

Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

- by zimmy6996

I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

Read the article

Ubuntu stopped recognizing my iPod

- by flashnode

Rythmbox on Ubuntu 10.10 used to recognize my 3rd gen Nano and transfer mp3s. Now I plug it in and Ubuntu doesn't pop-up that box that asks what you want to do anymore. It is only recognized if I reboot and the thing is plugged in. Here is the output to 'lsusb -v -s bus:device' Bus 001 Device 008: ID 05ac:1262 Apple, Inc. iPod Nano 3.Gen Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05ac Apple, Inc. idProduct 0x1262 iPod Nano 3.Gen bcdDevice 0.01 iManufacturer 1 Apple Inc. iProduct 2 iPod iSerial 3 000A27001A670128 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 149 bNumInterfaces 3 bConfigurationValue 2 iConfiguration 4 iPod USB Interface bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 30 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 2 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 1 bSourceID 1 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bDelay 1 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 35 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 9 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 11025 tSamFreq[ 2] 12000 tSamFreq[ 3] 16000 tSamFreq[ 4] 22050 tSamFreq[ 5] 24000 tSamFreq[ 6] 32000 tSamFreq[ 7] 44100 tSamFreq[ 8] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0 Undefined Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 208 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) This ubuntu forum told me to check the automount settings under /apps/nautilus/preferences/media_automount_open in gconf-editor. And I did that. Any clues?

Read the article

Tool or script to detect moved or renamed files on Linux prior to a backup

- by Pharaun

Basically I am searching to see if there exists a tool or script that can detect moved or renamed files so that I can get a list of renamed/moved files and apply the same operation on the other end of the network to conserve on bandwidth. Basically disk storage is cheap but bandwidth isn't, and the problem is that the files often will be reorganized or moved around into a better directory structure thus when you use rsync to do the backup, rsync won't notice that its a renamed or moved file and re-transmission it over the network all over again despite having the same file on the other end. So I am wondering if there exists a script or tool that can record where all the files are and their names, then just prior to a backup, it would rescan and detect moved or renamed files, then I can take that list and re-apply the move/rename operation on the other side. Here's a list of the "general" features of the files: Large unchanging files They can be renamed or moved around [Edit:] These all are good answers, and what I end up doing in the end was looking at all of the answers and will be writing some code to deal with this. Basically what I am thinking/working on now is: Using something like AIDE for the "initial" scan and enable me to keep checksums on the files because they are supposed to never change, so it would aid on detecting corruption. Creating an inotify daemon that would monitor these files/directory and recording any changes relating to renames & moving the files around to a log file. There are some edge cases where inotify might fail to record that something happened to the file system, thus there is a final step of using find to search the file system for files that has a change time latter than the last backup. This has several benefits: Checksums/etc from AIDE to be able to check/make sure that some media did not get corrupt Inotify keeps resource usage low and no need to re-scan the filesystem over and over No need to patch rsync; If I have to patch things I can, but I would prefer to avoid patching things to keep the burden lower, (IE don't need to re-patch everytime there is an update). I've used Unison before and its really nice, however I could've sworn that Unison does keep copies around on the filesystem and that its "archive" files can grow to be rather large?

Read the article

New harddrives failing within weeks.

- by Jason Kealey

I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

Read the article

Should I choose KVM/XEN over OpenVZ or use them together?

- by Krystian

I've got a dual xeon e5504 server, with [for now] only 8GB of ram. Storage is'n impressive either: 3x 146GB sas in raid5 + 500GB sata drives. Currently it works as a development server, but it's over speced for our needs and since our development methods changed through last 2 years we decided it will work as a production system for some of our applications + we would like to have a separate system for testing/research. Our apps are mainly web apps deployed on tomcats [plural as some of the apps require older versions] and connected to Postgres. I would like to have a production system, where only httpd+tomcat+db are setup and nothing else runs there. Sterile system. Apart from that, I would like a test system, where I can play with different JVM settings, deploy my test apps, play with tomcat/httpd settings and restart them without interfering with the production system. Apart from that, I would like to be able to play with different linux flavors, with newer kernels to test how they work etc. I know, this is not possible with OpenVZ and I would have to choose KVM for that. I am thinking about merging the two, and setting up a KVM to be able to work with different systems [linux only to be frank] + use openVZ to setup separate machines for my development needs. I would simply go with that, but reading here and there about the performance impact full virtualization has over containers and looking at the specs of my server makes me think twice about it. I don't want to loose too much performance, especially because of the nature of my apps [few JVMs running at the same time]. It will be my first time with virtualization, apart from using desktop virtualbox/vmserver. Although I am a fast learner I don't want to mess with the main system so much that it will break the production apps or make them crawl. Although they are more or less internal apps and they don't produce much load, they need to be stable. I've read, that KVM host is a normal linux installation and it allows to run normal processes on it. If that is so, does it allow to run openVZ as well? I mean... can I have KVM and OpenVZ running on the same system/kernel? Or do I have to setup another system to run OpenVZ containers? How much performance impact can this have for me? Will my hardware suffice? oh and one more thing... unfortunately I'm quite limited with the funds... I'm looking for a free solution only :/

Read the article

How to install RAID drivers on already installed Windows 7?

- by happysencha

64-bit Windows 7 Ultimate 6GB RAM Intel i7 920 Intel X25-M SSD 80GB 2,5" Club 3D Radeon HD5750 GA-EX58-UD4P Motherboard I've been running fine with Windows 7 installed on the SSD. I wanted to create an mirrored Raid-1 setup for backups using two hard disks, so I ordered two Samsung HD203WI. This motherboard supports two different RAID controllers, the Intel's ICH10R and Gigabyte's SATA2 SATA controller. There are 6 SATA ports behind the ICH10R and 2 SATA ports for the Gigabyte controller. I googled around and seemed that the ICH10R is a better choice and since then I've been trying to make it work. When I activate the [RAID] mode from BIOS, the Windows 7 gives BSOD exactly as described by this guy: "Windows 7 will start to boot, it gets to the screen where there are 4 colors coming together and it blue screens and restarts no matter what I do." First thing I did: turned off the RAID and booted to Windows and tried to install the SATA RAID drivers from Gigabyte. I launch the driver installation program and it gives "This computer does not meet the minimum requirements for installing the software" error. I then tried Intel's Rapid Storage Technology drivers (which apparently is the same as the one offered at Gigabyte's site), but it resulted in exactly the same error. I then detached the new Samsung hard disks from the SATA ports, but left the [RAID] enabled in BIOS. To my surprise, it still BSOD'd, so at this point I knew it is an OS/driver issue. Also, I tried with the Gigabyte's RAID enabled (while the ICH10R RAID disabled) and it booted just fine. So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed." So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks. I mean why would I need to re-install operating system to add RAID setup?

Read the article

Proper set up shared folders for users

- by user221486

First I would like to say thanks for helping, and I have huge problem with proper set up permission for shared folders. I have Windows 7 x64 ent. - name: backupfb - added to domain with shared folder on drive e: (e:\backup) 50 clients/laptops with TSM Tivoli fastback for workstations who save files on shared folder And I need to configure proper permission for my shared folders that only owner of folder can access to their folders. Folder structure is: e:\backup <- shared as a "backup" folder \\backupfb\backup\ e:\backup\BackupAdmin <-- directory is used by the Tivoli Storage Manager FastBack for Workstations client to download revisions and configurations. Nodes require read-only access to these directories e:\backup\RealTimeBackup <-- enable client accounts to create directories that are only accessible by the account that created them. As a result, the directory that contains data for a node is not created until that node connects to the server. So permission should look like that (take from instructions): Inheritable permissions from object`s parents are DISABLE Permission entries: \\backupfb\backup\BackupAdmin Allow Users Read, Execute This folder, subfolders, and files Traverse Folder / Execute Allow List Folder / Read Data Allow Read Attributes Allow Read Extended Attributes Allow Delete subfolders and files Allow Delete Allow Read Permission’s Allow Allow Administrators Full Control This folder, subfolders, and files Both folders have enabled option "apply these permissions to objects and/or containers within this container only" Here everything works fine \\backupfb\backup\RealTimeBackup <<-- Allow Administrators Full Control This folder, subfolders, and files Allow CREATOR OWNER Full Control This folder, subfolders, and files (from domain) Allow Users Special This folder only Traverse Folder / Execute Allow List Folder / Read Data Allow Read Attributes Allow Read Extended Attributes Allow Create Files / Write Data Allow Create Folders / Append Data Allow Delete subfolders and files Allow Read Permission’s Allow Allow OWNER RIGHTS* Full Control This folder, subfolders, and files Here I have huge problem with CREATOR OWNER Im able to set FULL CONTROL but I can only apply "Subfolders and files only". When I change props. to "This folder, subfolders and files" and save its change to "Subfolders and files only" So I try use icacls to set up permissions @echo off takeown /F E:\backup\ /R /A for /D %%i IN (E:\backup\RealTimeBackup*) DO icacls E:\backup\RealTimeBackup\%%~nxi /grant:r cloud\%%~nxi:F /T /C pause but after that user are able to create just one folder in \backupfb\backup\RealTimeBackup\userfolder but problem is with subfolders In log i have: FBW5022E Unable to access the specified file Explanation: The file specified is unable to be accessed. Possibly spelled incorrectly, or bad path, or permissions. User response: Ensure the user has the proper permissions for the file and directories involved andthat the file and directory exist Any idea ?? pls help ;-) thanks

Read the article

AGENT: The World's Smartest Watch

- by Rob Chartier

AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013. All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3. The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK. You can download the tooling now and get started with Apps and Faces immediately. The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework. Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models. The watch on the tiny QI Charter If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message. An app showing the premium weather data! Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

Read the article

Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

- by Jason Fitzpatrick

You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

Read the article

Importing Multiple Schemas to a Model in Oracle SQL Developer Data Modeler

- by thatjeffsmith

Your physical data model might stretch across multiple Oracle schemas. Or maybe you just want a single diagram containing tables, views, etc. spanning more than a single user in the database. The process for importing a data dictionary is the same, regardless if you want to suck in objects from one schema, or many schemas. Let’s take a quick look at how to get started with a data dictionary import. I’m using Oracle SQL Developer in this example. The process is nearly identical in Oracle SQL Developer Data Modeler – the only difference being you’ll use the ‘File’ menu to get started versus the ‘File – Data Modeler’ menu in SQL Developer. Remember, the functionality is exactly the same whether you use SQL Developer or SQL Developer Data Modeler when it comes to the data modeling features – you’ll just have a cleaner user interface in SQL Developer Data Modeler. Importing a Data Dictionary to a Model You’ll want to open or create your model first. You can import objects to an existing or new model. The easiest way to get started is to simply open the ‘Browser’ under the View menu. The Browser allows you to navigate your open designs/models You’ll see an ‘Untitled_1′ model by default. I’ve renamed mine to ‘hr_sh_scott_demo.’ Now go back to the File menu, and expand the ‘Data Modeler’ section, and select ‘Import – Data Dictionary.’ This is a fancy way of saying, ‘suck objects out of the database into my model’ Connect! If you haven’t already defined a connection to the database you want to reverse engineer, you’ll need to do that now. I’m going to assume you already have that connection – so select it, and hit the ‘Next’ button. Select the Schema(s) to be imported Select one or more schemas you want to import The schemas selected on this page of the wizard will dictate the lists of tables, views, synonyms, and everything else you can choose from in the next wizard step to import. For brevity, I have selected ALL tables, views, and synonyms from 3 different schemas: HR SCOTT SH Once I hit the ‘Finish’ button in the wizard, SQL Developer will interrogate the database and add the objects to our model. The Big Model and the 3 Little Models I can now see ALL of the objects I just imported in the ‘hr_sh_scott_demo’ relational model in my design tree, and in my relational diagram. Quick Tip: Oracle SQL Developer calls what most folks think of as a ‘Physical Model’ the ‘Relational Model.’ Same difference, mostly. In SQL Developer, a Physical model allows you to define partitioning schemes, advanced storage parameters, and add your PL/SQL code. You can have multiple physical models per relational models. For example I might have a 4 Node RAC in Production that uses partitioning, but in test/dev, only have a single instance with no partitioning. I can have models for both of those physical implementations. The list of tables in my relational model Wouldn’t it be nice if I could segregate the objects based on their schema? Good news, you can! And it’s done by default Several of you might already know where I’m going with this – SUBVIEWS. You can easily create a ‘SubView’ by selecting one or more objects in your model or diagram and add them to a new SubView. SubViews are just mini-models. They contain a subset of objects from the main model. This is very handy when you want to break your model into smaller, more digestible parts. The model information is identical across the model and subviews, so you don’t have to worry about making a change in one place and not having it propagate across your design. SubViews can be used as filters when you create reports and exports as well. So instead of generating a PDF for everything, just show me what’s in my ‘ABC’ subview. But, I don’t want to do any work! Remember, I’m really lazy. More good news – it’s already done by default! The schemas are automatically used to create default SubViews Auto-Navigate to the Object in the Diagram In the subview tree node, right-click on the object you want to navigate to. You can ask to be taken to the main model view or to the SubView location. If you haven’t already opened the SubView in the diagram, it will be automatically opened for you. The SubView diagram only contains the objects from that SubView Your SubView might still be pretty big, many dozens of objects, so don’t forget about the ‘Navigator‘ either! In summary, use the ‘Import’ feature to add existing database objects to your model. If you import from multiple schemas, take advantage of the default schema based SubViews to help you manage your models! Sometimes less is more!

Read the article

SQL SERVER – Database Dynamic Caching by Automatic SQL Server Performance Acceleration

- by pinaldave

My second look at SafePeak’s new version (2.1) revealed to me few additional interesting features. For those of you who hadn’t read my previous reviews SafePeak and not familiar with it, here is a quick brief: SafePeak is in business of accelerating performance of SQL Server applications, as well as their scalability, without making code changes to the applications or to the databases. SafePeak performs database dynamic caching, by caching in memory result sets of queries and stored procedures while keeping all those cache correct and up to date. Cached queries are retrieved from the SafePeak RAM in microsecond speed and not send to the SQL Server. The application gets much faster results (100-500 micro seconds), the load on the SQL Server is reduced (less CPU and IO) and the application or the infrastructure gets better scalability. SafePeak solution is hosted either within your cloud servers, hosted servers or your enterprise servers, as part of the application architecture. Connection of the application is done via change of connection strings or adding reroute line in the c:\windows\system32\drivers\etc\hosts file on all application servers. For those who would like to learn more on SafePeak architecture and how it works, I suggest to read this vendor’s webpage: SafePeak Architecture. More interesting new features in SafePeak 2.1 In my previous review of SafePeak new I covered the first 4 things I noticed in the new SafePeak (check out my article “SQLAuthority News – SafePeak Releases a Major Update: SafePeak version 2.1 for SQL Server Performance Acceleration”): Cache setup and fine-tuning – a critical part for getting good caching results Database templates Choosing which database to cache Monitoring and analysis options by SafePeak Since then I had a chance to play with SafePeak some more and here is what I found. 5. Analysis of SQL Performance (present and history): In SafePeak v.2.1 the tools for understanding of performance became more comprehensive. Every 15 minutes SafePeak creates and updates various performance statistics. Each query (or a procedure execute) that arrives to SafePeak gets a SQL pattern, and after it is used again there are statistics for such pattern. An important part of this product is that it understands the dependencies of every pattern (list of tables, views, user defined functions and procs). From this understanding SafePeak creates important analysis information on performance of every object: response time from the database, response time from SafePeak cache, average response time, percent of traffic and break down of behavior. One of the interesting things this behavior column shows is how often the object is actually pdated. The break down analysis allows knowing the above information for: queries and procedures, tables, views, databases and even instances level. The data is show now on all arriving queries, both read queries (that can be cached), but also any types of updates like DMLs, DDLs, DCLs, and even session settings queries. The stats are being updated every 15 minutes and SafePeak dashboard allows going back in time and investigating what happened within any time frame. 6. Logon trigger, for making sure nothing corrupts SafePeak cache data If you have an application with many parts, many servers many possible locations that can actually update the database, or the SQL Server is accessible to many DBAs or software engineers, each can access some database directly and do some changes without going thru SafePeak – this can create a potential corruption of the data stored in SafePeak cache. To make sure SafePeak cache is correct it needs to get all updates to arrive to SafePeak, and if a DBA will access the database directly and do some changes, for example, then SafePeak will simply not know about it and will not clean SafePeak cache. In the new version, SafePeak brought a new feature called “Logon Trigger” to solve the above challenge. By special click of a button SafePeak can deploy a special server logon trigger (with a CLR object) on your SQL Server that actually monitors all connections and informs SafePeak on any connection that is coming not from SafePeak. In SafePeak dashboard there is an interface that allows to control which logins can be ignored based on login names and IPs, while the rest will invoke cache cleanup of SafePeak and actually locks SafePeak cache until this connection will not be closed. Important to note, that this does not interrupt any logins, only informs SafePeak on such connection. On the Dashboard screen in SafePeak you will be able to see those connections and then decide what to do with them. Configuration of this feature in SafePeak dashboard can be done here: Settings -> SQL instances management -> click on instance -> Logon Trigger tab. Other features: 7. User management ability to grant permissions to someone without changing its configuration and only use SafePeak as performance analysis tool. 8. Better reports for analysis of performance using 15 minute resolution charts. 9. Caching of client cursors 10. Support for IPv6 Summary SafePeak is a great SQL Server performance acceleration solution for users who want immediate results for sites with performance, scalability and peak spikes challenges. Especially if your apps are packaged or 3rd party, since no code changes are done. SafePeak can significantly increase response times, by reducing network roundtrip to the database, decreasing CPU resource usage, eliminating I/O and storage access. SafePeak team provides a free fully functional trial www.safepeak.com/download and actually provides a one-on-one assistance during such trial. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

Read the article

mysql not starting

- by Eiriks

I have a server running on rackspace.com, it been running for about a year (collecting data for a project) and no problems. Now it seems mysql froze (could not connect either through ssh command line, remote app (sequel pro) or web (pages using the db just froze). I got a bit eager to fix this quick and rebooted the virtual server, running ubuntu 10.10. It is a small virtual LAMP server (10gig storage - I'm only using 1, 256mb ram -has not been a problem). Now after the reboot, I cannot get mysql to start again. service mysql status mysql stop/waiting I believe this just means mysql is not running. How do I get this running again? service mysql start start: Job failed to start No. Just typing 'mysql' gives: mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) There is a .sock file in this folder, 'ls -l' gives: srwxrwxrwx 1 mysql mysql 0 2012-12-01 17:20 mysqld.sock From googleing this for a while now, I see that many talk about the logfile and my.cnf. Logs Not sure witch ones I should look at. This log-file is empty: 'var/log/mysql/error.log', so is the 'var/log/mysql.err' and 'var/log/mysql.log'. my.cnf is located in '/etc/mysql' and looks like this. Can't see anything clearly wrong with it either. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ I need the data in the database (so i'd like to avoid reinstalling), and I need it back up running again. All hint, tips and solutions are welcomed and appreciated.

Read the article

XNA Notes 006

- by George Clingerman

If you used to think the XNA community was small and inactive, hopefully these XNA Notes are opening your eyes. And I honestly feel like I’m still only catching the tail end of everything that’s going on. It’s a large and active community and you can be so mired down in one part of it you miss all sorts of cool stuff another part is doing. XNA is many things to a lot of people and that makes for a lot of really awesome things going on. So here’s what I saw going on this last week! Time Critical XNA New: XNA Team - Peer Review now closes for XNA 3.1 games http://blogs.msdn.com/b/xna/archive/2011/02/08/peer-review-pipeline-closed-for-new-xna-gs-3-1-games-or-updates-on-app-hub.aspx http://twitter.com/XNACommunity/statuses/34649816529256448 The XNA Team posts about a meet up with Microsoft for Creator’s going to be at GDC, March 3rd at the Lobby Bar http://on.fb.me/fZungJ XNA Team: @mklucher is busying playing the the bubblegum on WP7 made by a member of the XNA team (although reportedly made in Silverlight? Crazy! ;) ) http://twitter.com/mklucher/statuses/34645662737895426 http://bubblegum.me Shawn Hargreaves posts multiple posts (is this a sign that something new is coming from the XNA team? Usually when Shawn has time to post, something has just wrapped up…) Random Shuffle http://blogs.msdn.com/b/shawnhar/archive/2011/02/09/random-shuffle.aspx Doing the right thing: resume, rewind or skip ahead http://blogs.msdn.com/b/shawnhar/archive/2011/02/10/doing-the-right-thing-resume-rewind-or-skip-ahead.aspx XNA Developers: Andrew Russel was on .NET Rocks recently talking with Carl and Richard about developing games for Xbox, iPhone and Android http://www.dotnetrocks.com/default.aspx?ShowNum=635 Eric W. releases the Fishing Girl source code into the wild http://ericw.ca/blog/posts/fishing-girl-now-open-source/ http://forums.create.msdn.com/forums/p/74642/454512.aspx#454512 BinaryTweedDeej reminds that XNA community that Indie City wants you involved http://twitter.com/BinaryTweedDeej/statuses/34596114028044288 http://www.indiecity.com Mike McLaughlin (@mikebmcl) releases his first two XNA articles on the TechNet wiki http://social.technet.microsoft.com/wiki/contents/articles/xna-framework-overview.aspx http://social.technet.microsoft.com/wiki/contents/articles/content-pipeline-overview.aspx John Watte plays around with the Content Pipeline and Music Visualization exploring just what can be done. http://www.enchantedage.com/xna-content-pipeline-fft-song-analysis http://www.enchantedage.com/fft-in-xna-content-pipeline-for-beat-detection-for-the-win Simon Stevens writes up his talk on Vector Collision Physics http://www.simonpstevens.com/News/VectorCollisionPhysics @domipheus puts together an XNA Task Manager http://www.flickr.com/photos/domipheus/5405603197/ MadNinjaSkillz releases his fork of Nick's Easy Storage component on CodePlex http://twitter.com/MadNinjaSkillz/statuses/34739039068229634 http://ezstorage.codeplex.com @ActiveNick was interviewed by Rob Cameron and discusses Windows Phone 7, Bing Maps and XNA http://twitter.com/ActiveNick/statuses/35348548526546944 http://msdn.microsoft.com/en-us/cc537546 Radiangames (Luke Schneider) posts about converting his games from XNA to Unity http://radiangames.com/?p=592 UberMonkey (@ElementCy) posts about a new project in the works, CubeTest a Minecraft style terrain http://www.ubergamermonkey.com/personal-projects/new-project-in-the-works/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+Ubergamermonkey+%28UberGamerMonkey%29 Xbox LIVE Indie Games (XBLIG): VideoGamer Rob review Bonded Realities http://videogamerrob.wordpress.com/2011/02/05/xblig-review-bonded-realities/ XBLIG Round Up on Gamergeddon http://www.gamergeddon.com/2011/02/06/xbox-indie-game-round-up-february-6th/ Are gamers still rating Indie Games after the Xbox Dashboard update? http://www.gamemarx.com/news/2011/02/06/are-gamers-still-rating-indie-games-after-the-xbox-dashboard-update.aspx Joystiq - Xbox Live Indie Gems: Corrupted http://www.joystiq.com/2011/02/04/xbox-live-indie-gems-corrupted/ Raymond Matthews of DarkStarMatryx reviews (Almost) Total Mayhem and Aban Hawkins & the 1000 Spikes http://www.darkstarmatryx.com/?p=225 http://www.darkstarmatryx.com/?p=229 8 Bit Horse reviews Aban Hawkins & the 1000 spikes http://8bithorse.blogspot.com/2011/01/aban-hawkins-1000-spikes-xbl-indie.html 2010 wrap-up for FunInfused Games http://www.krissteele.net/blogdetails.aspx?id=245 NeoGaf roundup of January's XBLIGs http://www.neogaf.com/forum/showthread.php?t=420528 Armless Ocotopus interviews Michael Ventnor creator of Bonded Realities http://www.armlessoctopus.com/2011/02/07/interview-michael-ventnor-of-red-crest-studios/ @recharge_media posts about the new city music for Woodvale in Sin Rising http://rechargemedia.com/2011/02/08/new-city-theme-woodvale/ @DrMisty posts some footage of YoYoYo in action http://www.mstargames.co.uk/mistryblogmain/54-yoyoyoblogs/184-video-update.html Xona Games - Decimation X3 on Reviews on the Run http://video.citytv.com/video/detail/782443063001.000000/reviews-on-the-run--february-8-2011/g4/ @benkane gives an early peek at his action RPG coming to XBLIG http://www.youtube.com/watch?v=bDF_PrvtwU8 Rock, Paper Shotgun talks to Zeboyd games about bringing Cthulhu Saves the World to PC http://www.rockpapershotgun.com/2011/02/11/summoning-cthulhu-natter-with-zeboyd/ Xbox LIVE Indieverse interviews the creator of Bonded Realities http://xbl-indieverse.blogspot.com/2011/02/xbl-indieverse-interview-red-crest.html XNA Game Development: Dream-In-Code posts about an upcoming XNA Challenge/Coding contest http://www.dreamincode.net/forums/blog/1385/entry-3192-xna-challengecontest/ Sgt.Conker covers Fishing Girl and IndieFreaks Game Framework release http://www.sgtconker.com/2011/02/fishing-girl-did-not-sell-a-single-copy/ http://www.sgtconker.com/2011/02/indiefreaks-game-framework-v0-2-0-0/ @slyprid releases Transmute v0.40a with lots of new features and fixes http://twitter.com/slyprid/statuses/34125423067533312 http://twitter.com/slyprid/statuses/35326876243337216 http://forgottenstarstudios.com/ Jeff Brown writes an XNA 4.0 tutorial on Saving/Loading on the Xbox 360 http://www.robotfootgames.com/xna-tutorials/92-xna-tutorial-savingloading-on-xbox-360-40 XNA for Silverlight Developers: Part 3- Animation http://www.silverlightshow.net/items/XNA-for-Silverlight-developers-Part-3-Animation-transforms.aspx?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+xna-connection-twitter-specific-stream+%28XNA+Connection%27s+Twitter+specific+stream%29 The news from Nokia is definitely something XNA developers will want to keep their eye on http://blogs.forum.nokia.com/blog/nokia-developer-news/2011/02/11/letter-to-developers?sf1066337=1

Read the article

Computer Networks UNISA - Chap 12 – Networking Security

- by MarkPearl

After reading this section you should be able to Identify security risks in LANs and WANs and design security policies that minimize risks Explain how physical security contributes to network security Discuss hardware and design based security techniques Understand methods of encryption such as SSL and IPSec, that can secure data in storage and in transit Describe how popular authentication protocols such as RADIUS< TACACS,Kerberos, PAP, CHAP, and MS-CHAP function Use network operating system techniques to provide basic security Understand wireless security protocols such as WEP, WPA and 802.11i Security Audits Before spending time and money on network security, examine your networks security risks – rate and prioritize risks. Different organizations have different levels of network security requirements. Security Risks Not all security breaches result from a manipulation of network technology – there are human factors that can play a role as well. The following categories are areas of considerations… Risks associated with People Risks associated with Transmission and Hardware Risks associated with Protocols and Software Risks associated with Internet Access An effective security policy A security policy identifies your security goals, risks, levels of authority, designated security coordinator and team members, responsibilities for each team member, and responsibilities for each employee. In addition it specifies how to address security breaches. It should not state exactly which hardware, software, architecture, or protocols will be used to ensure security, nor how hardware or software will be installed and configured. A security policy must address an organizations specific risks. to understand your risks, you should conduct a security audit that identifies vulnerabilities and rates both the severity of each threat and its likelihood of occurring. Security Policy Content Security policy content should… Policies for each category of security Explain to users what they can and cannot do and how these measures protect the networks security Should define what confidential means to the organization Response Policy A security policy should provide for a planned response in the event of a security breach. The response policy should identify the members of a response team, all of whom should clearly understand the the security policy, risks, and measures in place. Some of the roles concerned could include… Dispatcher – the person on call who first notices the breach Manager – the person who coordinates the resources necessary to solve the problem Technical Support Specialist – the person who focuses on solving the problem Public relations specialist – the person who acts as the official spokesperson for the organization Physical Security An important element in network security is restricting physical access to its components. There are various techniques for this including locking doors, security people at access points etc. You should identify the following… Which rooms contain critical systems or data and must be secured Through what means might intruders gain access to these rooms How and to what extent are authorized personnel granted access to these rooms Are authentication methods such as ID cards easy to forge etc. Security in Network Design The optimal way to prevent external security breaches from affecting you LAN is not to connect your LAN to the outside world at all. The next best protection is to restrict access at every point where your LAN connects to the rest of the world. Router Access List – can be used to filter or decline access to a portion of a network for certain devices. Intrusion Detection and Prevention While denying someone access to a section of the network is good, it is better to be able to detect when an attempt has been made and notify security personnel. This can be done using IDS (intrusion detection system) software. One drawback of IDS software is it can detect false positives – i.e. an authorized person who has forgotten his password attempts to logon. Firewalls A firewall is a specialized device, or a computer installed with specialized software, that selectively filters or blocks traffic between networks. A firewall typically involves a combination of hardware and software and may reside between two interconnected private networks. The simplest form of a firewall is a packet filtering firewall, which is a router that examines the header of every packet of data it receives to determine whether that type of packet is authorized to continue to its destination or not. Firewalls can block traffic in and out of a LAN. NOS (Network Operating System) Security Regardless of the operating system, generally every network administrator can implement basic security by restricting what users are authorized to do on a network. Some of the restrictions include things related to Logons – place, time of day, total time logged in, etc Passwords – length, characters used, etc Encryption Encryption is the use of an algorithm to scramble data into a format that can be read only by reversing the algorithm. The purpose of encryption is to keep information private. Many forms of encryption exist and new ways of cracking encryption are continually being invented. The following are some categories of encryption… Key Encryption PGP (Pretty Good Privacy) SSL (Secure Sockets Layer) SSH (Secure Shell) SCP (Secure CoPy) SFTP (Secure File Transfer Protocol) IPSec (Internet Protocol Security) For a detailed explanation on each section refer to pages 596 to 604 of textbook Authentication Protocols Authentication protocols are the rules that computers follow to accomplish authentication. Several types exist and the following are some of the common authentication protocols… RADIUS and TACACS PAP (Password Authentication Protocol) CHAP and MS-CHAP EAP (Extensible Authentication Protocol) 802.1x (EAPoL) Kerberos Wireless Network Security Wireless transmissions are particularly susceptible to eavesdropping. The following are two wireless network security protocols WEP WPA

Read the article

8 Things You Can Do In Android’s Developer Options

- by Chris Hoffman

The Developer Options menu in Android is a hidden menu with a variety of advanced options. These options are intended for developers, but many of them will be interesting to geeks. You’ll have to perform a secret handshake to enable the Developer Options menu in the Settings screen, as it’s hidden from Android users by default. Follow the simple steps to quickly enable Developer Options. Enable USB Debugging “USB debugging” sounds like an option only an Android developer would need, but it’s probably the most widely used hidden option in Android. USB debugging allows applications on your computer to interface with your Android phone over the USB connection. This is required for a variety of advanced tricks, including rooting an Android phone, unlocking it, installing a custom ROM, or even using a desktop program that captures screenshots of your Android device’s screen. You can also use ADB commands to push and pull files between your device and your computer or create and restore complete local backups of your Android device without rooting. USB debugging can be a security concern, as it gives computers you plug your device into access to your phone. You could plug your device into a malicious USB charging port, which would try to compromise you. That’s why Android forces you to agree to a prompt every time you plug your device into a new computer with USB debugging enabled. Set a Desktop Backup Password If you use the above ADB trick to create local backups of your Android device over USB, you can protect them with a password with the Set a desktop backup password option here. This password encrypts your backups to secure them, so you won’t be able to access them if you forget the password. Disable or Speed Up Animations When you move between apps and screens in Android, you’re spending some of that time looking at animations and waiting for them to go away. You can disable these animations entirely by changing the Window animation scale, Transition animation scale, and Animator duration scale options here. If you like animations but just wish they were faster, you can speed them up. On a fast phone or tablet, this can make switching between apps nearly instant. If you thought your Android phone was speedy before, just try disabling animations and you’ll be surprised how much faster it can seem. Force-Enable FXAA For OpenGL Games If you have a high-end phone or tablet with great graphics performance and you play 3D games on it, there’s a way to make those games look even better. Just go to the Developer Options screen and enable the Force 4x MSAA option. This will force Android to use 4x multisample anti-aliasing in OpenGL ES 2.0 games and other apps. This requires more graphics power and will probably drain your battery a bit faster, but it will improve image quality in some games. This is a bit like force-enabling antialiasing using the NVIDIA Control Panel on a Windows gaming PC. See How Bad Task Killers Are We’ve written before about how task killers are worse than useless on Android. If you use a task killer, you’re just slowing down your system by throwing out cached data and forcing Android to load apps from system storage whenever you open them again. Don’t believe us? Enable the Don’t keep activities option on the Developer options screen and Android will force-close every app you use as soon as you exit it. Enable this app and use your phone normally for a few minutes — you’ll see just how harmful throwing out all that cached data is and how much it will slow down your phone. Don’t actually use this option unless you want to see how bad it is! It will make your phone perform much more slowly — there’s a reason Google has hidden these options away from average users who might accidentally change them. Fake Your GPS Location The Allow mock locations option allows you to set fake GPS locations, tricking Android into thinking you’re at a location where you actually aren’t. Use this option along with an app like Fake GPS location and you can trick your Android device and the apps running on it into thinking you’re at locations where you actually aren’t. How would this be useful? Well, you could fake a GPS check-in at a location without actually going there or confuse your friends in a location-tracking app by seemingly teleporting around the world. Stay Awake While Charging You can use Android’s Daydream Mode to display certain apps while charging your device. If you want to force Android to display a standard Android app that hasn’t been designed for Daydream Mode, you can enable the Stay awake option here. Android will keep your device’s screen on while charging and won’t turn it off. It’s like Daydream Mode, but can support any app and allows users to interact with them. Show Always-On-Top CPU Usage You can view CPU usage data by toggling the Show CPU usage option to On. This information will appear on top of whatever app you’re using. If you’re a Linux user, the three numbers on top probably look familiar — they represent the system load average. From left to right, the numbers represent your system load over the last one, five, and fifteen minutes. This isn’t the kind of thing you’d want enabled most of the time, but it can save you from having to install third-party floating CPU apps if you want to see CPU usage information for some reason. Most of the other options here will only be useful to developers debugging their Android apps. You shouldn’t start changing options you don’t understand. If you want to undo any of these changes, you can quickly erase all your custom options by sliding the switch at the top of the screen to Off.

Read the article

Three Steps to Becoming an Expert Oracle Linux System Administrator

- by Antoinette O'Sullivan

Oracle provides a complete system administration curriculum to take you from your initial experience of Unix to being an expert Oracle Linux system administrator. You can take these live instructor-led courses from your own desk through live-virtual events or by traveling to an education center through in-class events. Step 1: Unix and Linux Essentials This 3-day course is designed for users and administrators who are new to Oracle Linux. It will help you develop the basic UNIX skills needed to interact comfortably and confidently with the operating system. Below is a sample of the in-class events already on the schedule. Location Date Delivery Language Vivoorde, Belgium 28 October 2013 English Berlin, Germany 15 July 2013 German Utrecht, Netherlands 19 August 2013 Dutch Bucarest, Romania 12 August 2013 Romanian Ankara, Turkey 6 January 2013 Turkish Nairobi, Kenya 5 August 2013 English Kaduna, Nigeria 15 July 2013 English Woodmead, South Africa 15 July 2013 English Jakarta, Indonesia 23 September 2013 English Petaling Jaya, Malaysia 22 July 2013 English Makati City, Philippines 3 July 2013 English Bangkok, Thailand 20 November 2013 English Auckland, New Zealand 5 August 2013 English Melbourne, Australia 12 August 2013 English Ottawa, Montreal, Toronto, Canada 3 September 2013 English San Francisco and San Jose, CA, United States 15 July 2013 English Reston, VA, United States 7 August 2013 English Edison, NJ, and King of Prussia, PA, United States 3 September 2013 English Denver, CO, United States 25 September 2013 English Cambridge, MA, and Roseville MN, United States 6 November 2013 English Phoenix, AZ, and Sacramento, CA, United States 25 November 2013 English Step 2: Oracle Linux System Administration Through this 5-day course, become a knowledgeable Oracle Linux system administrator, learning how to install Oracle Linux and the benefits of Oracle's Unbreakable Enterprise Kernel and Ksplice. Below is a sample of in-class events already on the schedule. Location Date Delivery Language Vienna, Austria 1 July 2013 German Vivoorde, Belgium 18 November 2013 English Zagreb, Croatia 16 September 2013 Croatian London, England 3 September 2013 English Manchester, England 9 September 2013 English Paris, France 29 July 2013 French Budapest, Hungary 8 July 2013 Hungarian Utrecht, Netherland 2 September 2013 Dutch Warsaw, Poland 15 July 2013 Polish Bucharest, Romania 2 December 2013 Romanian Ankara, Turkey 7 October 2013 Turkish Istanbul, Turkey 9 September 2013 Turkish Nairobi, Kenya 12 August 2013 English Petaling Jaya, Malaysia 29 July 2013 English Kuala Lumpur, Malaysia 21 October 2013 English Makati City, Philippines 8 July 2013 English Singapore 24 July 2013 English Bangkok, Thailand 26 July 2013 English Canberra, Australia 19 August 2013 English Melbourne, Australia 16 September 2013 English Sydney, Australia 19 August 2013 English Mississauga, Canada 26 August 2013 English Ottawa, Canada 4 November 2013 English Phoenix, AZ, United States 7 October 2013 English Belmont, CA, United States 23 September 2013 English Irvine, CA, United States 18 November 2013 English Sacramento, CA, United States 19 August 2013 English San Francisco, CA, United States 15 July 2013 English Denver, CO, United States 19 August 2013 English Schaumburg, IL, United States 26 August 2013 English Indianapolis, IN, United States 14 October 2013 English Columbia, MD, United States 30 September 2013 English Roseville, MN, United States 19 August 2013 English St Louis, MO, United States 7 October 2013 English Edison, NJ, United States 28 October 2013 English Beaverton, OR, United States 12 August 2013 English Pittsburg, PA, United States 9 December 2013 English Reston, VA, United States 12 August 2013 English Brookfield, WI, United States 30 September 2013 English Sao Paolo, Brazil 15 July 2013 Brazilian Portugese Step 3: Oracle Linux Advanced System Administration This new 3-day course is ideal for administrators who want to learn about managing resources and file systems while developing troubleshooting and advanced storage administration skills. You will learn about Linux Containers, Cgroups, btrfs, DTrace and more. Below is a sample of in-class events already on the schedule. Location Date Delivery Language Melbourne, Australia 9 October 2013 English Roseville, MN, United States 3 September 2013 English To register for or learn more about these courses, go to http://oracle.com/education/linux. Watch this video to learn more about Oracle's operating system training.

Read the article

WebLogic Server Performance and Tuning: Part I - Tuning JVM

- by Gokhan Gungor

Each WebLogic Server instance runs in its own dedicated Java Virtual Machine (JVM) which is their runtime environment. Every Admin Server in any domain executes within a JVM. The same also applies for Managed Servers. WebLogic Server can be used for a wide variety of applications and services which uses the same runtime environment and resources. Oracle WebLogic ships with 2 different JVM, HotSpot and JRocket but you can choose which JVM you want to use. JVM is designed to optimize itself however it also provides some startup options to make small changes. There are default values for its memory and garbage collection. In real world, you will not want to stick with the default values provided by the JVM rather want to customize these values based on your applications which can produce large gains in performance by making small changes with the JVM parameters. We can tell the garbage collector how to delete garbage and we can also tell JVM how much space to allocate for each generation (of java Objects) or for heap. Remember during the garbage collection no other process is executed within the JVM or runtime, which is called STOP THE WORLD which can affect the overall throughput. Each JVM has its own memory segment called Heap Memory which is the storage for java Objects. These objects can be grouped based on their age like young generation (recently created objects) or old generation (surviving objects that have lived to some extent), etc. A java object is considered garbage when it can no longer be reached from anywhere in the running program. Each generation has its own memory segment within the heap. When this segment gets full, garbage collector deletes all the objects that are marked as garbage to create space. When the old generation space gets full, the JVM performs a major collection to remove the unused objects and reclaim their space. A major garbage collect takes a significant amount of time and can affect system performance. When we create a managed server either on the same machine or on remote machine it gets its initial startup parameters from $DOMAIN_HOME/bin/setDomainEnv.sh/cmd file. By default two parameters are set: Xms: The initial heapsize Xmx: The max heapsize Try to set equal initial and max heapsize. The startup time can be a little longer but for long running applications it will provide a better performance. When we set -Xms512m -Xmx1024m, the physical heap size will be 512m. This means that there are pages of memory (in the state of the 512m) that the JVM does not explicitly control. It will be controlled by OS which could be reserve for the other tasks. In this case, it is an advantage if the JVM claims the entire memory at once and try not to spend time to extend when more memory is needed. Also you can use -XX:MaxPermSize (Maximum size of the permanent generation) option for Sun JVM. You should adjust the size accordingly if your application dynamically load and unload a lot of classes in order to optimize the performance. You can set the JVM options/heap size from the following places: Through the Admin console, in the Server start tab In the startManagedWeblogic script for the managed servers $DOMAIN_HOME/bin/startManagedWebLogic.sh/cmd JAVA_OPTIONS="-Xms1024m -Xmx1024m" ${JAVA_OPTIONS} In the setDomainEnv script for the managed servers and admin server (domain wide) USER_MEM_ARGS="-Xms1024m -Xmx1024m" When there is free memory available in the heap but it is too fragmented and not contiguously located to store the object or when there is actually insufficient memory we can get java.lang.OutOfMemoryError. We should create Thread Dump and analyze if that is possible in case of such error. The second option we can use to produce higher throughput is to garbage collection. We can roughly divide GC algorithms into 2 categories: parallel and concurrent. Parallel GC stops the execution of all the application and performs the full GC, this generally provides better throughput but also high latency using all the CPU resources during GC. Concurrent GC on the other hand, produces low latency but also low throughput since it performs GC while application executes. The JRockit JVM provides some useful command-line parameters that to control of its GC scheme like -XgcPrio command-line parameter which takes the following options; XgcPrio:pausetime (To minimize latency, parallel GC) XgcPrio:throughput (To minimize throughput, concurrent GC ) XgcPrio:deterministic (To guarantee maximum pause time, for real time systems) Sun JVM has similar parameters (like -XX:UseParallelGC or -XX:+UseConcMarkSweepGC) to control its GC scheme. We can add -verbosegc -XX:+PrintGCDetails to monitor indications of a problem with garbage collection. Try configuring JVM’s of all managed servers to execute in -server mode to ensure that it is optimized for a server-side production environment.

Read the article

Taking advantage of Windows Azure CDN and Dynamic Pages in ASP.NET - Caching content from hosted services

- by Shawn Cicoria

With the updates to Windows Azure CDN announced this week [1] I wanted to help illustrate the capability with a working sample that will serve up dynamic content from an ASP.NET site hosted in a WebRole. First, to get a good overview of the capability you can read the Overview of the Windows Azure CDN [2] content on MSDN. When you setup the ability to cache content from a hosted service, the requirement is to provide a path to your role’s DNS endpoint that ends in the path “/cdn”. Additionally, you then map CDN to that service. What WAZ CDN does, is allow you to then map that through the CDN to your host. The CDN will then make a request to your host on your client’s behalf. The requirement is still that your client, and any Url’s that are to be serviced through the CDN and this capability have to use the CDN DNS name and not your host – no different than what CDN does for Blog storage. The following 2 URL’s are samples of how the client needs to issue the requests. Windows Azure hosted service URL: http: //myHostedService.cloudapp.net/cdn/music.aspx - for regular “dynamic” content Windows Azure CDN URL: http: //<identifier>.vo.msecnd.net/music.aspx - for CDN “cachable” content. The first URL path’s the request direct to your host into the Azure datacenter. The 2nd URL paths the request through the CDN infrastructure, where CDN will make the determination to request the content on behalf of the client to the Azure datacenter and your host on the /cdn path. The big advantage here is you can apply logic to your content creation. What’s important is emitting the CDN friendly headers that allow CDN to request and re-request only when you designate based upon it’s rules of “staleness” as described in the overview page. With IIS7.5 there is an underlying issue when the Managed Module “OutputCache” is enabled that in order to emit a good header for your content, you’ll need to remove, and in my sample, helps provide CDN friendly headers. You get IIS 7.5 when running under OS Family “2” in your service configuration. By default, and when the OutputCache managed module is loaded, if you use the HttpResponse.CachePolicy to set the Http Headers for “max-age” when the HttpCacheability is “Public”, you will NOT get the “max-age” emitted as part of the “Cache-control:” header. Instead, the OutputCache module will remove “max-age” and just emit “public”. It works ok when Cacheability is set to “private”. To work around the issue and ensure your code as follows emits the full max-age along with the public option, you need to remove as follows: <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <remove name="OutputCache"/> </modules> </system.webServer> Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(rv)); In the attached solution, the way I approached it was to have a VirtualApplication under the root site that has it’s own web.config - this VirtualApplication is the /cdn of the site and when deployed to Azure as a Web Role will surface as a distinct IIS Application – along with a separate AppDomain. The CDN Sample is a simple Web Forms site that the /default landing page contains 3 IFrames to host: 1. Content direct from the host @ http://xxxx.cloudapp.net/cdn 2. Content via the CDN @ http://azxxx.vo.msecnd.net 3. Simple list of recent requests – showing where the request came from. When you run the sample the first time you hit the page, both the Host and the CDN will cause 2 initial requests to hit the host. You won’t see the first requests in the list because of timing – but if you refresh, you’ll see that the list will show that you have 2 requests initially. 1. sourced direct from the Browser to the HOST 2. sourced via the CDN The picture above shows the call-outs of each of those requests – green rows showing requests coming direct to the HOST, yellow showing the CDN request. The IP addresses of the green items are direct from the client, where the CDN is from the CDN data center. As you refresh the page (hit Ctrl+F5 to force a full refresh and avoid “304 – not changed”) you’ll see that the request to the HOST get’s processed direct; but the request to the CDN endpoint is serviced direct from the CDN and doesn’t incur any additional request back to the HOST. The following is the Headers from the CDN response (Status-Line) HTTP/1.1 200 OK Age 13 Cache-Control public, max-age=300 Connection keep-alive Content-Length 6212 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:14 GMT Expires Fri, 11 Mar 2011 20:52:01 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET The following are the Headers from the HOST response (Status-Line) HTTP/1.1 200 OK Cache-Control public, max-age=300 Content-Length 6189 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:15 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET You can see that with the CDN request, the countdown (age) starts for aging the content. The full sample is located here: CDNSampleSite.zip [1] http://blogs.msdn.com/b/windowsazure/archive/2011/03/09/now-available-updated-windows-azure-sdk-and-windows-azure-management-portal.aspx [2] http://msdn.microsoft.com/en-us/library/ff919703.aspx

Read the article

SQLAuthority News – Community Tech Days – A SQL Legends in Ahmedabad – December 11, 2010

- by pinaldave

Ahmedabad is going to be fortunate city again on December 11. We are going to have SQL Server Legends present at the prestigious event of Community Tech Days in Ahmedabad. The venue details are as following: H K Hall, H K College Campus, Near Handloom House, Opp. Natraj Cinema, Ashram Road, Ahmedabad – 380009 Click here to Registration for the event. Agenda of the event is as following. 10:15am – 10:30am Welcome – Pinal Dave 10:30am – 11:15am SQL Tips and Tricks for .NET Developers by Jacob Sebastian 11:15am – 11:30am Tea Break 11:30am – 12:15pm Best Database Practice for SharePoint Server by Pinal Dave 12:15pm – 01:00pm Self Service Business Intelligence by Rushabh Mehta 01:00pm – 02:00pm Lunch 02:00pm – 02:45pm Managing your future, Managing your time by Vinod Kumar 02:45pm – 03:30pm Windows Azure News and Introducing Storage Services by Mahesh Devjibhai Dhola 03:30pm – 03:45pm Tea Break 03:45pm – 04:30pm Improve Silverlight application with Threads and MEF by Prabhjot Singh Bakshi 04:30pm – 04:45pm Thank you – Mahesh Devjibhai Dhola Ahmedabad considers itself extremely fortunate when there are SQL Legends presenting on various subjects in front of community. Here is brief introduction about them in my own words. (Their names are in order of the agenda). 1) Jacob Sebastian (SQL Server MVP) – This person needs no introduction. Every developer and programmer in Ahmedabad and India knows him. He is the one man who is founder of various community-related ideas like SQL Challenges, SQL Quiz and BeyondRelational. He works with me on all the community-related activities; we are extremely good friends. 2) Rushabh Mehta (SQL Server MVP) – If you use SQL Server – you know this man. He is the President of SQL Server of Professional Association (PASS) and one of the leading Business Intelligence (BI) Experts renowned in the world. He has blessed Ahmedabad once before and now doing once again this year. 3) Vinod Kumar (Microsoft Evangelist – SQL Server & BI) – Ahmedabad remembers him very well. During his last visit to Ahmedabad, a fight had almost broke outside the hall amidst the rush to listen him. There were more people standing and listening to him than those who were seated. This is one man Ahmedabad will never forget. 4) and Myself. I will not rate myself in the league of abovementioned experts, but I must say that I am fortunate to have friends like those above. We also have two strong .NET presenters – Mahesh and Prabhjot. During this event, there will be plenty of giveaways, lots of fun, demos and pure technical talk, specifically no marketing and promotion – just pure technical talk. The most interesting part is that all the SQL Legends – Jacob, Rushabh and Vinod are for sure presenting on SQL Server but with a twist. Jacob – He is going to talk about .NET and SQL – Optimization Techniques Rushabh – He is going to talk about SQL and BI – Self Service BI Vinod – He is going to talk about professional development of developers – Managing Time Pinal – Best Practices for SharePoint Database Administrators – SharePoint DBA – I have presented this session earlier. I promise this event is going to be one of the best events held ever. You can read about the earlier event over here. ?Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

Read the article

Big Data – Buzz Words: Importance of Relational Database in Big Data World – Day 9 of 21

- by Pinal Dave

In yesterday’s blog post we learned what is HDFS. In this article we will take a quick look at the importance of the Relational Database in Big Data world. A Big Question? Here are a few questions I often received since the beginning of the Big Data Series - Does the relational database have no space in the story of the Big Data? Does relational database is no longer relevant as Big Data is evolving? Is relational database not capable to handle Big Data? Is it true that one no longer has to learn about relational data if Big Data is the final destination? Well, every single time when I hear that one person wants to learn about Big Data and is no longer interested in learning about relational database, I find it as a bit far stretched. I am not here to give ambiguous answers of It Depends. I am personally very clear that one who is aspiring to become Big Data Scientist or Big Data Expert they should learn about relational database. NoSQL Movement The reason for the NoSQL Movement in recent time was because of the two important advantages of the NoSQL databases. Performance Flexible Schema In personal experience I have found that when I use NoSQL I have found both of the above listed advantages when I use NoSQL database. There are instances when I found relational database too much restrictive when my data is unstructured as well as they have in the datatype which my Relational Database does not support. It is the same case when I have found that NoSQL solution performing much better than relational databases. I must say that I am a big fan of NoSQL solutions in the recent times but I have also seen occasions and situations where relational database is still perfect fit even though the database is growing increasingly as well have all the symptoms of the big data. Situations in Relational Database Outperforms Adhoc reporting is the one of the most common scenarios where NoSQL is does not have optimal solution. For example reporting queries often needs to aggregate based on the columns which are not indexed as well are built while the report is running, in this kind of scenario NoSQL databases (document database stores, distributed key value stores) database often does not perform well. In the case of the ad-hoc reporting I have often found it is much easier to work with relational databases. SQL is the most popular computer language of all the time. I have been using it for almost over 10 years and I feel that I will be using it for a long time in future. There are plenty of the tools, connectors and awareness of the SQL language in the industry. Pretty much every programming language has a written drivers for the SQL language and most of the developers have learned this language during their school/college time. In many cases, writing query based on SQL is much easier than writing queries in NoSQL supported languages. I believe this is the current situation but in the future this situation can reverse when No SQL query languages are equally popular. ACID (Atomicity Consistency Isolation Durability) – Not all the NoSQL solutions offers ACID compliant language. There are always situations (for example banking transactions, eCommerce shopping carts etc.) where if there is no ACID the operations can be invalid as well database integrity can be at risk. Even though the data volume indeed qualify as a Big Data there are always operations in the application which absolutely needs ACID compliance matured language. The Mixed Bag I have often heard argument that all the big social media sites now a days have moved away from Relational Database. Actually this is not entirely true. While researching about Big Data and Relational Database, I have found that many of the popular social media sites uses Big Data solutions along with Relational Database. Many are using relational databases to deliver the results to end user on the run time and many still uses a relational database as their major backbone. Here are a few examples: Facebook uses MySQL to display the timeline. (Reference Link) Twitter uses MySQL. (Reference Link) Tumblr uses Sharded MySQL (Reference Link) Wikipedia uses MySQL for data storage. (Reference Link) There are many for prominent organizations which are running large scale applications uses relational database along with various Big Data frameworks to satisfy their various business needs. Summary I believe that RDBMS is like a vanilla ice cream. Everybody loves it and everybody has it. NoSQL and other solutions are like chocolate ice cream or custom ice cream – there is a huge base which loves them and wants them but not every ice cream maker can make it just right for everyone’s taste. No matter how fancy an ice cream store is there is always plain vanilla ice cream available there. Just like the same, there are always cases and situations in the Big Data’s story where traditional relational database is the part of the whole story. In the real world scenarios there will be always the case when there will be need of the relational database concepts and its ideology. It is extremely important to accept relational database as one of the key components of the Big Data instead of treating it as a substandard technology. Ray of Hope – NewSQL In this module we discussed that there are places where we need ACID compliance from our Big Data application and NoSQL will not support that out of box. There is a new termed coined for the application/tool which supports most of the properties of the traditional RDBMS and supports Big Data infrastructure – NewSQL. Tomorrow In tomorrow’s blog post we will discuss about NewSQL. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Finding the problem on a partially succeeded build

- by Martin Hinshelwood

Now that I have the Build failing because of a genuine bug and not just because of a test framework failure, lets see if we can trace through to finding why the first test in our new application failed. Lets look at the build and see if we can see why there is a red cross on it. First, lets open that build list. On Team Explorer Expand your Team Project Collection | Team Project and then Builds. Double click the offending build. Figure: Opening the Build list is a key way to see what the current state of your software is. Figure: A test is failing, but we can now view the Test Results to find the problem Figure: You can quite clearly see that the test has failed with “The device is not ready”. To me the “The Device is not ready” smacks of a System.IO exception, but it passed on my local computer, so why not on the build server? Its a FaultException so it is most likely coming from the Service and not the client, so lets take a look at the client method that the test is calling: bool IProfileService.SaveDefaultProjectFile(string strComputerName) { ProjectFile file = new ProjectFile() { ProjectFileName = strComputerName + "_" + System.DateTime.Now.ToString("yyyyMMddhhmmsss") + ".xml", ConnectionString = "persist security info=False; pooling=False; data source=(local); application name=SSW.SQLDeploy.vshost.exe; integrated security=SSPI; initial catalog=SSWSQLDeployNorthwindSample", DateCreated = System.DateTime.Now, DateUpdated = System.DateTime.Now, FolderPath = @"C:\Program Files\SSW SQL Deploy\SampleData\", IsComplete=false, Version = "1.3", NewDatabase = true, TimeOut = 5, TurnOnMSDE = false, Mode="AutomaticMode" }; string strFolderPath = "D:\\"; //LocalSettings.ProjectFileBasePath; string strFileName = strFolderPath + file.ProjectFileName; try { using (FileStream fs = new FileStream(strFileName, FileMode.Create)) { DataContractSerializer serializer = new DataContractSerializer(typeof(ProjectFile)); using (XmlDictionaryWriter writer = XmlDictionaryWriter.CreateTextWriter(fs)) { serializer.WriteObject(writer, file); } } } catch (Exception ex) { //TODO: Log the exception throw ex; return false; } return true; } Figure: You can see on lines 9 and 18 that there are calls being made to specific folders and disks. What is wrong with this code? What assumptions mistakes could the developer have made to make this look OK: That every install would be to “C:\Program Files\SSW SQL Deploy” That every computer would have a “D:\\” That checking in code at 6pm because the had to go home was a good idea. lets solve each of these problems: We are in a web service… lets store data within the web root. So we can call “Server.MapPath(“~/App_Data/SSW SQL Deploy\SampleData”) instead. Never reference an explicit path. If you need some storage for your application use IsolatedStorage. Shelve your code instead. What else could have been done? Code review before check-in – The developer should have shelved their code and asked another dev to look at it. Use Defensive programming – Make sure that any code that has the possibility of failing has checks. Any more options? Let me know and I will add them. What do we do? The correct things to do is to add a Bug to the backlog, but as this is probably going to be fixed in sprint, I will add it directly to the sprint backlog. Right click on the failing test Select “Create Work Item | Bug” Figure: Create an associated bug to add to the backlog. Set the values for the Bug making sure that it goes into the right sprint and Area. Make your steps to reproduce as explicit as possible, but “See test” is valid under these circumstances. Figure: Add it to the correct Area and set the Iteration to the Area name or the Sprint if you think it will be fixed in Sprint and make sure you bring it up at the next Scrum Meeting. Note: make sure you leave the “Assigned To” field blank as in Scrum team members sign up for work, you do not give it to them. The developer who broke the test will most likely either sign up for the bug, or say that they are stuck and need help. Note: Visual Studio has taken care of associating the failing test with the Bug. Save… Technorati Tags: WCF,MSTest,MSBuild,Team Build 2010,Team Test 2010,Team Build,Team Test

Search Results

Search found 5420 results on 217 pages for 'auxilliary storage'.

Page 201/217 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208 | Next Page >

- by Sakamoto Kazuma

- by Anthony

- by Barry Kelly

- by Dani Avni

- by zimmy6996

- by flashnode

- by Pharaun

- by Jason Kealey

- by Krystian

- by happysencha

- by user221486

- by Rob Chartier

- by Jason Fitzpatrick

- by thatjeffsmith

- by pinaldave

- by Eiriks

- by George Clingerman

- by MarkPearl

- by Chris Hoffman

- by Antoinette O'Sullivan

- by Gokhan Gungor

- by Shawn Cicoria

- by pinaldave

- by Pinal Dave

- by Martin Hinshelwood

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208 | Next Page >