Search Results

Search found 5393 results on 216 pages for 'beginners guide'.

Page 201/216 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

  • help setting up wsHttpBinding WCF service on .net

    - by manu1001
    I'm trying to host a WCF service with wsHttpBinding. I created a certificate using makecert and put some lines in web.config. This is the error that I'm getting: System.ArgumentException: The certificate 'CN=WCfServer' must have a private key that is capable of key exchange. The process must have access rights for the private key. On googling up it seems to be some issue with access rights on the certificate file. I used cacls to give read permission to NETWORK SERVICE and also my username but it didn't change anything. I also went to security settings in the properties of the certificate file and gave full control to NETWORK SERVICE and my username. Again to no avail. Can you guide me as to what the problem is and what exactly I need to do? I'm really flaky with these certificate things. Here's my web.config: <system.serviceModel> <services> <service name="Abc.Service" behaviorConfiguration="Abc.ServiceBehavior"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="Abc.BindConfig" contract="Abc.IService"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="Abc.ServiceBehavior"> <serviceMetadata httpGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="false"/> <serviceCredentials> <clientCertificate> <authentication certificateValidationMode="PeerTrust"/> </clientCertificate> <serviceCertificate findValue="WCfServer" storeLocation="CurrentUser" storeName="My" x509FindType="FindBySubjectName" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <bindings> <wsHttpBinding> <binding name="Abc.BindConfig"> <security mode="Message"> <message clientCredentialType="Certificate" /> </security> </binding> </wsHttpBinding> </bindings> </system.serviceModel>

    Read the article

  • In Email, Image (img) Source (src) Tags are rewritten as relative links. How to fix?

    - by Noah Goodrich
    I'm working on sending out an html based email, and every time it sends the image src tags and some of the anchor href tags are modified to be relative url's. Update 2: This is happening between when the body of the email is generated and sent and when it arrives in my inbox. Update: I am using Postfix on a LAMPP server. In addition, I am using Zend_Mail to send the emails out. For example, I have a link: src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/header.jpg" And it gets rewritten as: src="../../../../images/email/highpoint_2009_04/header.jpg" What can cause this to occur and how is it corrected? Email headers: Return-Path: <[email protected]> X-Original-To: [email protected] Delivered-To: [email protected] Received: by mail.example.com (Postfix, from userid 0) id 6BF012252; Tue, 14 Apr 2009 12:15:20 -0600 (MDT) To: Gabriel <[email protected]> Subject: Free Map to Sales Success From: Somebody <[email protected]> Date: Tue, 14 Apr 2009 12:15:20 -0600 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: multipart/related Content-Disposition: inline Message-Id: <[email protected]> Original content to be sent out: <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td valign="top"> <a href="http://www.furnituretrainingcompany.com"> <img moz-do-not-send="true" alt="The Furniture Training Company - Know More. Sell More." src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/header.jpg" border="0" height="123" width="600"> </a> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td valign="top"><img alt="Visit us at High Point to receive your free training poster" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/hero.jpg" moz-do-not-send="true" height="150" width="600"><br> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_content_left.jpg" moz-do-not-send="true" height="30" width="30"><br> </td> <td bgcolor="#ffffff" valign="top"><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><big><b>See you at Market</b></big><br> </small></big></big></big></big></font> <font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><br> </small></big></big></big></big></font><small><font face="Helvetica, Arial, sans-serif">Visit our space to get your free Map to Sales Success poster! This unique 24 X 36 color poster is your guide to developing high volume salespeople with larger tickets. Find us in the new NHFA Retailer Resource Center located in the Plaza. <br> <br> Don&#8217;t miss Mark Lacy&#8217;s entertaining seminar "Help Wanted! My Sales Associates Can&#8217;t Sell Water to a Thirsty Camel." He&#8217;ll reveal powerful secrets for turning sales associates into furniture experts that will sell. See him Saturday, April 25th at 11:30 AM in the seminar room of the new NHFA Retail Resource Center in the Plaza. <br> <br> Stop by our space to learn how our ingenious internet-delivered training courses are easy to use, guaranteed to work, and cheaper than the daily donuts. Over 95% report increased sales. <br> <br> Plan to see us at High Point. </font></small> <font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><small><br> <br> <br> <br> </small></small></big></big></big></big></font><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><small> </small></big></big></big></font></small> <a href="http://www.furnituretrainingcompany.com/map"><img alt="Find out more" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/image_content_left.jpg" moz-do-not-send="true" border="0" height="67" width="326"></a><br> <br> </td> <td bgcolor="#ffffff" valign="top"> <img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_content_middle.jpg" moz-do-not-send="true" height="28" width="28"><br> </td> <td bgcolor="#ffffff" valign="top"><img alt="Roadmap to Sales Success poster" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/image_content_right.jpg" moz-do-not-send="true" height="267" width="186"><br> <font face="Helvetica, Arial, sans-serif"><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#000000" size="1"><big><big><big><small><b>Road Map to Sales Success<br> </b><br> </small></big></big></big></font>This beautiful poster is yours free for simply stopping by and visiting with us at High Point. <span class="moz-txt-slash">Our space is located inside the </span>new NHFA Retailer Resource Center in the Plaza Suites, 222 South Main St, 1st Floor. We will be at market from Sat April 25th until Thur April 30th. </small></font><br> </td> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_content_right.jpg" moz-do-not-send="true" height="30" width="30"><br> <br> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/disclaimer_divider.jpg" moz-do-not-send="true" height="25" width="600"><br> </td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_left.jpg" moz-do-not-send="true"></td> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_middle.jpg" moz-do-not-send="true"><br> <font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" color="#666666" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><big><small><small><small>If you are not attending the High Point market in April but would still like to receive a free Road Map to Sales Success poster visit us on the web at <u><a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="http://www.furnituretrainingcompany.com">www.furnituretrainingcompany.com</a></u>, or to speak with a Furniture Training Company representative, call toll free (866) 755-5996. We do not offer free shipping outside of the U.S. and Canada. Retailers outside of the U.S. and Canada may call for more information. Limit one free Road Map to Sales Success per company. Other copies of the poster may be purchased on our web site.<br> <br> </small></small></small></big></big></big></big></font> <font color="#666666"><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><small><small>We hope you found this message to be useful. However, if you'd rather not receive future emails of this sort from The Furniture Training Company, please <a moz-do-not-send="true" href="http://www.furnituretraining.com/contact">click here to unsubscribe</a>.<br> <br> </small></small></big></big></big></font></small><small><font originaltag="yes" style="font-size: 9px; font-family: Verdana,Arial,Helvetica,sans-serif;" face="Verdana, Arial, Helvetica, sans-serif" size="1"><big><big><big><small><small>&copy;Copyright 2009 The Furniture Training Company.<br> 1770 North Research Park Way, <br> North Logan, UT 84341. <br> All Rights Reserved.</small></small></big></big></big></font></small></font><br> </td> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_right.jpg" moz-do-not-send="true"></td> </tr> </tbody> </table> <table align="center" border="0" cellpadding="0" cellspacing="0" width="600"> <tbody> <tr> <td bgcolor="#ffffff" valign="top"><img alt="" src="http://www.furnituretrainingcompany.com/images/email/highpoint_2009_04/footer.jpg" moz-do-not-send="true"> </td> </tr> </tbody> </table> <br> <br> Content that gets sent: <table border=3D"0" cellspacing=3D"0" cellpadding=3D"0" width=3D"600" al= ign=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td valign=3D"top"><a href= =3D"http://www.furnituretrainingcompany.com"> <img src=3D"http://www.fur= nituretrainingcompany.com/images/email/highpoint_2009_04/header.jpg" bor= der=3D"0" alt=3D"The Furniture Training Company - Know More. Sell More."= width=3D"600" height=3D"123" /> </a></td>=0D=0A</tr>=0D=0A</tbody>=0D= =0A</table>=0D=0A<table border=3D"0" cellspacing=3D"0" cellpadding=3D"0"= width=3D"600" align=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td valign= =3D"top"><img src=3D"http://www.furnituretrainingcompany.com/images/emai= l/highpoint_2009_04/hero.jpg" alt=3D"Visit us at High Point to receive y= our free training poster" width=3D"600" height=3D"150" /><br /></td>=0D= =0A</tr>=0D=0A</tbody>=0D=0A</table>=0D=0A<table border=3D"0" cellspacin= g=3D"0" cellpadding=3D"0" width=3D"600" align=3D"center">=0D=0A<tbody>= =0D=0A<tr>=0D=0A<td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http:= //www.furnituretrainingcompany.com/images/email/highpoint_2009_04/spacer= _content_left.jpg" alt=3D"" width=3D"30" height=3D"30" /><br /></td>=0D= =0A<td valign=3D"top" bgcolor=3D"#ffffff"><span style=3D"font-size: xx-s= mall; font-family: Verdana,Arial,Helvetica,sans-serif; color: #000000;">= <big><big><big><big><small><big><strong>See you at Market</strong></big>= <br /> </small></big></big></big></big></span> <span style=3D"font-size:= xx-small; font-family: Verdana,Arial,Helvetica,sans-serif; color: #0000= 00;"><big><big><big><big><small><br /> </small></big></big></big></big><= /span><small><span style=3D"font-family: Helvetica,Arial,sans-serif;">Vi= sit our space to get your free Map to Sales Success poster! This unique= 24 X 36 color poster is your guide to developing high volume salespeopl= e with larger tickets. Find us in the new NHFA Retailer Resource Center= located in the Plaza. <br /> <br /> Don&rsquo;t miss Mark Lacy&rsquo;s= entertaining seminar "Help Wanted! My Sales Associates Can&rsquo;t Sell= Water to a Thirsty Camel." He&rsquo;ll reveal powerful secrets for turn= ing sales associates into furniture experts that will sell. See him Satu= rday, April 25th at 11:30 AM in the seminar room of the new NHFA Retail= Resource Center in the Plaza. <br /> <br /> Stop by our space to learn= how our ingenious internet-delivered training courses are easy to use,= guaranteed to work, and cheaper than the daily donuts. Over 95% report= increased sales. <br /> <br /> Plan to see us at High Point. </span></s= mall> <span style=3D"font-size: xx-small; font-family: Verdana,Arial,Hel= vetica,sans-serif; color: #000000;"><big><big><big><big><small><small><b= r /> <br /> <br /> <br /> </small></small></big></big></big></big></span= ><small><span style=3D"font-size: xx-small; font-family: Verdana,Arial,H= elvetica,sans-serif; color: #000000;"><big><big><big><small> </small></b= ig></big></big></span></small> <a href=3D"http://www.furnituretrainingco= mpany.com/map"><img src=3D"http://www.furnituretrainingcompany.com/image= s/email/highpoint_2009_04/image_content_left.jpg" border=3D"0" alt=3D"Fi= nd out more" width=3D"326" height=3D"67" /></a><br /> <br /></td>=0D=0A<= td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretr= ainingcompany.com/images/email/highpoint_2009_04/spacer_content_middle.j= pg" alt=3D"" width=3D"28" height=3D"28" /><br /></td>=0D=0A<td valign=3D= "top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretrainingcompan= y.com/images/email/highpoint_2009_04/image_content_right.jpg" alt=3D"Roa= dmap to Sales Success poster" width=3D"186" height=3D"267" /><br /> <spa= n style=3D"font-family: Helvetica,Arial,sans-serif;"><small><span style= =3D"font-size: xx-small; color: #000000;"><big><big><big><small><strong>= Road Map to Sales Success<br /> </strong><br /> </small></big></big></bi= g></span>This beautiful poster is yours free for simply stopping by and= visiting with us at High Point. <span class=3D"moz-txt-slash">Our space= is located inside the </span>new NHFA Retailer Resource Center in the P= laza Suites, 222 South Main St, 1st Floor. We will be at market from Sat= April 25th until Thur April 30th. </small></span><br /></td>=0D=0A<td v= align=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretraini= ngcompany.com/images/email/highpoint_2009_04/spacer_content_right.jpg" a= lt=3D"" width=3D"30" height=3D"30" /><br /> <br /></td>=0D=0A</tr>=0D=0A= </tbody>=0D=0A</table>=0D=0A<table border=3D"0" cellspacing=3D"0" cellpa= dding=3D"0" width=3D"600" align=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A= <td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituret= rainingcompany.com/images/email/highpoint_2009_04/disclaimer_divider.jpg= " alt=3D"" width=3D"600" height=3D"25" /><br /></td>=0D=0A</tr>=0D=0A</t= body>=0D=0A</table>=0D=0A<table border=3D"0" cellspacing=3D"0" cellpaddi= ng=3D"0" width=3D"600" align=3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td= valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituretrai= ningcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_left.jp= g" alt=3D"" /></td>=0D=0A<td valign=3D"top" bgcolor=3D"#ffffff"><img src= =3D"http://www.furnituretrainingcompany.com/images/email/highpoint_2009_= 04/spacer_disclaimer_middle.jpg" alt=3D"" /><br /> <span style=3D"font-s= ize: xx-small; font-family: Verdana,Arial,Helvetica,sans-serif; color: #= 666666;"><big><big><big><big><small><small><small>If you are not attendi= ng the High Point market in April but would still like to receive a free= Road Map to Sales Success poster visit us on the web at <span style=3D"= text-decoration: underline;"><a class=3D"moz-txt-link-abbreviated" href= =3D"http://www.furnituretrainingcompany.com">www.furnituretrainingcompan= y.com</a></span>, or to speak with a Furniture Training Company represen= tative, call toll free (866) 755-5996. We do not offer free shipping out= side of the U.S. and Canada. Retailers outside of the U.S. and Canada ma= y call for more information. Limit one free Road Map to Sales Success pe= r company. Other copies of the poster may be purchased on our web site.<= br /> <br /> </small></small></small></big></big></big></big></span> <sp= an style=3D"color: #666666;"><small><span style=3D"font-size: xx-small;= font-family: Verdana,Arial,Helvetica,sans-serif;"><big><big><big><small= ><small>We hope you found this message to be useful. However, if you'd r= ather not receive future emails of this sort from The Furniture Training= Company, please <a href=3D"http://www.furnituretraining.com/contact">cl= ick here to unsubscribe</a>.<br /> <br /> </small></small></big></big></= big></span></small><small><span style=3D"font-size: xx-small; font-famil= y: Verdana,Arial,Helvetica,sans-serif;"><big><big><big><small><small>&co= py;Copyright 2009 The Furniture Training Company.<br /> 1770 North Resea= rch Park Way, <br /> North Logan, UT 84341. <br /> All Rights Reserved.<= /small></small></big></big></big></span></small></span><br /></td>=0D=0A= <td valign=3D"top" bgcolor=3D"#ffffff"><img src=3D"http://www.furnituret= rainingcompany.com/images/email/highpoint_2009_04/spacer_disclaimer_righ= t.jpg" alt=3D"" /></td>=0D=0A</tr>=0D=0A</tbody>=0D=0A</table>=0D=0A<tab= le border=3D"0" cellspacing=3D"0" cellpadding=3D"0" width=3D"600" align= =3D"center">=0D=0A<tbody>=0D=0A<tr>=0D=0A<td valign=3D"top" bgcolor=3D"#= ffffff"><img src=3D"http://www.furnituretrainingcompany.com/images/email= /highpoint_2009_04/footer.jpg" alt=3D"" /></td>=0D=0A</tr>=0D=0A</tbody>= =0D=0A</table>=0D=0A<p><br /></p><br><hr><a href=3D'http://localhost/ftc= /app/unsubscribe.php?action=3DoptOut&pid=3D6121&cid=3D19&email=3Dmarkl@f= urnituretrainingcompany.com'>Click to Unsubscribe</a>

    Read the article

  • GoogleAppEngine : possible to disable FileUpload?

    - by James.Elsey
    Hi, When I deploy my application to GoogleAppEngine I keep getting the following error Uncaught exception from servlet java.lang.NoClassDefFoundError: java.io.FileOutputStream is a restricted class. Please see the Google App Engine developer's guide for more details. at com.google.apphosting.runtime.security.shared.stub.java.io.FileOutputStream.<clinit>(FileOutputStream.java) at org.apache.log4j.FileAppender.setFile(FileAppender.java:289) at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:163) at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:256) at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:132) at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:96) at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:654) at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:612) at org.apache.log4j.PropertyConfigurator.configureRootCategory(PropertyConfigurator.java:509) at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:415) at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:441) at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:468) at org.apache.log4j.LogManager.<clinit>(LogManager.java:122) at org.slf4j.impl.Log4jLoggerFactory.getLogger(Log4jLoggerFactory.java:73) at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:88) at org.apache.commons.logging.impl.SLF4JLogFactory.getInstance(SLF4JLogFactory.java:155) at org.apache.commons.logging.impl.SLF4JLogFactory.getInstance(SLF4JLogFactory.java:131) at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:685) at org.springframework.web.context.ContextLoader.<clinit>(ContextLoader.java:146) at org.springframework.web.context.ContextLoaderListener.createContextLoader(ContextLoaderListener.java:53) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:44) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:548) at org.mortbay.jetty.servlet.Context.startContext(Context.java:136) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.createHandler(AppVersionHandlerMap.java:191) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.getHandler(AppVersionHandlerMap.java:168) at com.google.apphosting.runtime.jetty.JettyServletEngineAdapter.serviceRequest(JettyServletEngineAdapter.java:123) at com.google.apphosting.runtime.JavaRuntime.handleRequest(JavaRuntime.java:243) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5485) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5483) at com.google.net.rpc.impl.BlockingApplicationHandler.handleRequest(BlockingApplicationHandler.java:24) at com.google.net.rpc.impl.RpcUtil.runRpcInApplication(RpcUtil.java:398) at com.google.net.rpc.impl.Server$2.run(Server.java:852) at com.google.tracing.LocalTraceSpanRunnable.run(LocalTraceSpanRunnable.java:56) at com.google.tracing.LocalTraceSpanBuilder.internalContinueSpan(LocalTraceSpanBuilder.java:536) at com.google.net.rpc.impl.Server.startRpc(Server.java:807) at com.google.net.rpc.impl.Server.processRequest(Server.java:369) at com.google.net.rpc.impl.ServerConnection.messageReceived(ServerConnection.java:442) at com.google.net.rpc.impl.RpcConnection.parseMessages(RpcConnection.java:319) at com.google.net.rpc.impl.RpcConnection.dataReceived(RpcConnection.java:290) at com.google.net.async.Connection.handleReadEvent(Connection.java:474) at com.google.net.async.EventDispatcher.processNetworkEvents(EventDispatcher.java:831) at com.google.net.async.EventDispatcher.internalLoop(EventDispatcher.java:207) at com.google.net.async.EventDispatcher.loop(EventDispatcher.java:103) at com.google.net.rpc.RpcService.runUntilServerShutdown(RpcService.java:251) at com.google.apphosting.runtime.JavaRuntime$RpcRunnable.run(JavaRuntime.java:404) at java.lang.Thread.run(Unknown Source) I've checked the documentation and it suggests to create a FileUpload class, since I won't be uploading files/documents etc from my application, is this necessary? Is there a way to disable this functionality, or at least bypass this error? I have already provided implementation for a MultipartWrapperFactory.Class as that has been suggested from searching for this error Thanks

    Read the article

  • OpenGL ES 2.0 FBO creation goes wrong with unknown error

    - by Nick
    Hey guys, I've been struggling with this for a while now, and this code crashes with, to me, unknown reasons. I'm creating an FBO, binding a texture, and then the very first glDrawArrays() crashes with a "EXC_BAD_ACCESS" on my iPhone Simulator. Here's the code I use to create the FBO (and bind texture and...) glGenFramebuffers(1, &lastFrameBuffer); glGenRenderbuffers(1, &lastFrameDepthBuffer); glGenTextures(1, &lastFrameTexture); glBindTexture(GL_TEXTURE1, lastFrameTexture); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, 768, 1029, 0, GL_RGBA, GL_UNSIGNED_SHORT_5_6_5, NULL); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); //Bind/alloc depthbuf glBindRenderbuffer(GL_RENDERBUFFER, lastFrameDepthBuffer); glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH_COMPONENT16, 768, 1029); glBindFramebuffer(GL_FRAMEBUFFER, lastFrameBuffer); //binding the texture to the FBO :D glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_2D, lastFrameTexture, 0); // attach the renderbuffer to depth attachment point glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_RENDERBUFFER, lastFrameDepthBuffer); [self checkFramebufferStatus]; As you can see this takes part in an object, checkFrameBufferStatus looks like this: GLenum status = glCheckFramebufferStatus(GL_FRAMEBUFFER); switch(status) { case GL_FRAMEBUFFER_COMPLETE: JNLogString(@"Framebuffer complete."); return TRUE; case GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT: JNLogString(@"[ERROR] Framebuffer incomplete: Attachment is NOT complete."); return false; case GL_FRAMEBUFFER_INCOMPLETE_MISSING_ATTACHMENT: JNLogString(@"[ERROR] Framebuffer incomplete: No image is attached to FBO."); return false; case GL_FRAMEBUFFER_INCOMPLETE_DIMENSIONS: JNLogString(@"[ERROR] Framebuffer incomplete: Attached images have different dimensions."); return false; case GL_FRAMEBUFFER_UNSUPPORTED: JNLogString(@"[ERROR] Unsupported by FBO implementation."); return false; default: JNLogString(@"[ERROR] Unknown error."); return false; JNLogString is just an NSLog, and in this case it gives me: 2010-04-03 02:46:54.854 Bubbleeh[6634:207] ES2Renderer.m:372 [ERROR] Unknown error. When I call it right there. So, it crashes, and diagnostic tells me there's an unknown error and I'm kinda stuck. I basically copied the code from the OpenGL ES 2.0 Programming Guide... What am I doing wrong? Thanks in Advance,

    Read the article

  • Bazaar newbie question about repository structures

    - by esc1729
    I want to use Bazaar on Windows XP for web-development and related tasks. Most of the files are edited locally and then transferred via FTP to the server. Just now the repository sits on my local workstation. Later on it should be shared locally with some co-workers. Perhaps we will use a local Linux server as a centralized repository, but this structure is not decided for now. But first I need to understand the impacts of the different repository setups, which I do not at all. Using Bazaar-Explorer on Windows XP I’ve created a ‘shared tree repository’ from the option list of the init-dialogue in some location dev-filter/. Bazaar Explorer tells me: Created repository with treeless branches at F:/bzr.local/dev-filter Created branch at F:/bzr.local/dev-filter/trunk Created working tree at F:/bzr.local/dev-filter/work OK so far. Now I move a bunch of files into the work directory and add and commit them as Rev 1 ‘Start Revision’. Then I work on some of these files and commit them again as Rev 2. Here my confusion starts. Shouldn’t both revisions go into the trunk? The trunk is still empty, beside the .bzr directory which only holds some management information. If I delete my working directory, which I have tried during these first experiments, everything is gone. There’s obviously no hidden storage of those files. OK. Perhaps I need to push it into the trunk? This does not work either. Entering the work/ directory and initializing the ‘push’ to the trunk, Bazaar-Explorer tells me No new revisions to push. So what? This looks like a severe conceptual misunderstanding about what should happen on my side. Edit, 2010-02-03: Some conclusions What I learned meanwhile is this: I think I should switch to the command line until I really understand what’s going on, at least for creating the repositories and branches. Bazaar Explorer introduces a new level of abstraction which I only can handle if I understand the level beneath One of the secrets of working with Bazaar at least for me is to understand those .bzr directories, their particular properties and states when created with ‘bzr init’, ‘bzr init-repository’, ‘bzr branch’ etc. in all their variants and how they are plumped together. While there’s a whole chapter of ‘Organizing your workspace’ in the Bazaar User Guide, it’s more or less workflow oriented. The manual contains a lot of directory structures for the given examples. What I would prefer beside this and have not (or only rudimentary) found so far is some graphical representation of those ‘Lego like’ .bzr building blocks which create the linking of all the parts. So I started to invent some simple notation while working through the examples and looking into the .bzr directories to document what information is stored there, where does it come from, how and to what is it linked, is it complete or shared, etc. Erich Schreiber

    Read the article

  • Firebug not breaking on errors

    - by stormdrain
    Hi. I reinstalled Firefox today, because... whatever. I reinstalled firebug, therefully, and now when I try to use it, it's all different. I believe it is the same version I had before. In fact, I even went digging through my trash and replaced the new firebug with the one I removed with the old Firefox. They ended up being the same version (1.5.3). My issue is, when I have an error in my script somewhere, it used to be that if on the script pane of firebug, the script would break on the error, and the script page would go to the offending line, highlighted, and all was right with the world. Now, it logs the error in the console, and that's it. I've spent the better part of the last hour trying to convince myself this isn't worth an ulcer; I am losing the battle, though. I've searched Google, put ads on Craigslist, even thought about becoming a cop. There were some examples on the Firebug dox, but none of them helped. A bunch of old references to a mysterious (break on all errors) option; an option which I think I might have set by accident--there is a little red circle-slash on my pause button (that's what she said), but there the script continues, all on its own. There was a guide somewhere on the firebug pages that spoke of setting the breakpoint next to the error in the console. I, however, don't have this option for some reason. The line of code is there in the console, but no breakpoint button next to it. This, however, would not be ideal even if it worked. I liked it when I could have the script page open, and if there were errors it would jump to that line. I could try to fix it, and re-load the page. If that line was fixed, GREAT, on to the next error on the page -- which would be highlighted and ready. I would like to offer a solicitation of help. Help.

    Read the article

  • How to arrange models, views, controllers in a Kohana 3 project

    - by Pekka
    I'm looking at how to set up a mid-sized web application with Kohana 3. I have implemented MVC patterns in the past but never worked against a "formalized" MVC framework so I'm still getting my head around the terminology - toying around with basic examples, building views and templates, and so on. I'm progressing fairly well but I want to set up a real-world web project (one of my own that I've been planning for quite some time now) as a learning object. I learn best by example, but example-based documentation is a bit sparse for Kohana 3 right now - they say so themselves on the site. While I'm not worried about getting into the framework soon enough, I'm a bit concerned about arranging a healthily structured code base from the start - i.e. how to split up controllers, how to name them, and how to separate the functionality into the appropriate models. My application could, in its core, be described as a business directory with a main businesses table. Businesses can be listed by category and by street name. Each business has a detail page. Business owners can log in and edit their business's entry. Businesses can post offers into an offers table. I know this is not very detailed, but I don't want to cram too much information into this question. I'll be more than happy to go into more detail if needed. Supposing I have all the basic functionality worked out and in place already - list all businesses, edit business, list businesses by street name, create offer logged in as business, and so on, and I'm just looking for how to fit the functionality into a MVC pattern and into a Kohana application structure that can be easily extended: Do you know real-life, publicly accessible examples of "database-heavy" applications like directories, online communities... with a log-in area built on Kohana 3 where I could take a peek how they do it? Are there conventions or best practices on how to structure an extendable login area for end users in a Kohana project that is not only able to handle a business directory page, but further products on separate pages as well? Do you know application structuring HOWTOs or best practices for Kohana 3 not mentioned in the user guide and the inofficial Wiki? Have you built something similar and could give me some recommendations?

    Read the article

  • jBASE 4.1 Database Noobster Questions

    - by Steve Johnson
    I am a software developer with devlopment experience in C#, C++ .Net alongwith SQL Server 2005/08, Oracle and mysql. But somehow i dont get jBASE to work at Windows XP SP3 machine. My goal is setup user accounts, create database on a JBASE ainstallation, authenticate and backup/restore few table via a C++ program. And i dont need to do it with builtin backup/restore tools of jBASE. I am able to install jBASe 4.1 aling with all its accessories on my WINXPSP3 machine. I was able to run the jSlimserver and TEMENOUS server along with licnesing server. I was able to add the license key as well. But after that what i was supposed to do? i have no idea about it. The docs and online help doesnt answer a simple question of how to create a database! The google search results from the jbase site all go to the 404 Pages! Can a jBASE expert guide to the following steps: Create a jBASE database. Create users Authenticate via those users Connect to database Create tables and insert data. Connect via a C++ or C# program to connect to jBASE DB and backup/restore tables. I know that this is too much too ask but i dont get to get the JBASE system. I cant get it to work on my System somehow. Btw, jdc and jexloree doesnt seem to do anything. I have checked that enironmental variables for jBASE are setup correctly and i have verified them. There are no extra JRE or JDK installations on my system. Besides all that, only licensing client, slim server and temenous server seem to run and listen for connections and no other execuatable ever seems to work. A simple tutorial to achieve the objective will be highly appreciated. Also if anyone can point out the mistake that i have done or anything i might need to check, then please do so. I will be highly encouraged and obliged. Thanks Steve

    Read the article

  • LINQ to XML : A query body must end with a select clause or a group clause

    - by Josh
    Can someone guide me on to repairing the error on this query : var objApps = from item in xDoc.Descendants("VHost") where(from x in item.Descendants("Application")) select new clsApplication { ConnectionsTotal = item.Element("ConnectionsTotal").Value }; It displays a compiler error "A query body must end with a select clause or a group clause". Where am I going wrong? Would appreciate any help.. Thanks. Edit : Here is my XML(haven't closed the tags here)...I need the connectioncount values inside the Application.. - <Server> <ConnectionsCurrent>67</ConnectionsCurrent> <ConnectionsTotal>1424182</ConnectionsTotal> <ConnectionsTotalAccepted>1385091</ConnectionsTotalAccepted> <ConnectionsTotalRejected>39091</ConnectionsTotalRejected> <MessagesInBytesRate>410455.0</MessagesInBytesRate> <MessagesOutBytesRate>540146.0</MessagesOutBytesRate> - <VHost> <Name>_defaultVHost_</Name> <TimeRunning>5129615.178</TimeRunning> <ConnectionsLimit>0</ConnectionsLimit> <ConnectionsCurrent>67</ConnectionsCurrent> <ConnectionsTotal>1424182</ConnectionsTotal> <ConnectionsTotalAccepted>1385091</ConnectionsTotalAccepted> <ConnectionsTotalRejected>39091</ConnectionsTotalRejected> <MessagesInBytesRate>410455.0</MessagesInBytesRate> <MessagesOutBytesRate>540146.0</MessagesOutBytesRate> - <Application> <Name>TestApp</Name> <Status>loaded</Status> <TimeRunning>411642.953</TimeRunning> <ConnectionsCurrent>11</ConnectionsCurrent> <ConnectionsTotal>43777</ConnectionsTotal> <ConnectionsTotalAccepted>43135</ConnectionsTotalAccepted> <ConnectionsTotalRejected>642</ConnectionsTotalRejected> <MessagesInBytesRate>27876.0</MessagesInBytesRate> <MessagesOutBytesRate>175053.0</MessagesOutBytesRate>

    Read the article

  • Bluetooth connect to a RS232 adapter in android

    - by ThePosey
    Hello All, I am trying to use the Bluetooth Chat sample API app that google provides to connect to a bluetooth RS232 adapter hooked up to another device. Here is the app for reference: http://developer.android.com/resources/samples/BluetoothChat/index.html And here is the spec sheet for the RS232 connector just for reference: http://serialio.com/download/Docs/BlueSnap-guide-4.77%5FCommands.pdf Well the problem is that when I go to connect to the device with: mmSocket.connect(); (BluetoothSocket::connect()) I always get an IOException error thrown by the connect method. When I do a toString on the exception I get "Service discovery failed". My question is mostly what are the cases that would cause an IOException to get thrown in the connect method? I know those are in the source somewhere but I don't know exactly how the java layer that you write apps in and the C/C++ layer that contains the actual stacks interface. I know that it uses the bluez bluetooth stack which is written in C/C++ but not sure how that ties into the java layer which is what I would think is throwing the exception. Any help on pointing me to where I can try to dissect this issue would be incredible. Also just to note I am able to pair with the RS232 adapter just fine but I am never able to actually connect. Here is the logcat output for more reference: I/ActivityManager( 1018): Displayed activity com.example.android.BluetoothChat/.DeviceListActivity: 326 ms (total 326 ms) E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) D/BluetoothChat( 1729): onActivityResult -1 D/BluetoothChatService( 1729): connect to: 00:06:66:03:0C:51 D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_CONNECTING E/BluetoothChat( 1729): + ON RESUME + I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_CONNECTING I/BluetoothChatService( 1729): BEGIN mConnectThread E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 I/BluetoothChatService( 1729): CONNECTION FAIL TOSTRING: java.io.IOException: Service discovery failed D/BluetoothChatService( 1729): setState() STATE_CONNECTING - STATE_LISTEN D/BluetoothChatService( 1729): start D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_LISTEN I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID I/NotificationService( 1018): enqueueToast pkg=com.example.android.BluetoothChat callback=android.app.ITransientNotification$Stub$Proxy@446327c8 duration=0 I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID The device I'm trying to connect to is the 00:06:66:03:0C:51 which I can scan for and apparently pair with just fine.

    Read the article

  • Best practices concerning view model and model updates with a subset of the fields

    - by Martin
    By picking MVC for developing our new site, I find myself in the midst of "best practices" being developed around me in apparent real time. Two weeks ago, NerdDinner was my guide but with the development of MVC 2, even it seems outdated. It's an thrilling experience and I feel privileged to be in close contact with intelligent programmers daily. Right now I've stumbled upon an issue I can't seem to get a straight answer on - from all the blogs anyway - and I'd like to get some insight from the community. It's about Editing (read: Edit action). The bulk of material out there, tutorials and blogs, deal with creating and view the model. So while this question may not spell out a question, I hope to get some discussion going, contributing to my decision about the path of development I'm to take. My model represents a user with several fields like name, address and email. All the names, in fact, on field each for first name, last name and middle name. The Details view displays all these fields but you can change only one set of fields at a time, for instance, your names. The user expands a form while the other fields are still visible above and below. So the form that is posted back contains a subset of the fields representing the model. While this is appealing to us and our layout concerns, for various reasons, it is to be shunned by serious MVC-developers. I've been reading about some patterns and best practices and it seems that this is not in key with the paradigm of viewmodel == view. Or have I got it wrong? Anyway, NerdDinner dictates using FormCollection och UpdateModel. All the null fields are happily ignored. Since then, the MVC-community has abandoned this approach to such a degree that a bug in MVC 2 was not discovered. UpdateModel does not work without a complete model in your formcollection. The view model pattern receiving most praise seems to be Dedicated view model that contains a custom view model entity and is the only one that my design issue could be made compatible with. It entails a tedious amount of mapping, albeit lightened by the use of AutoMapper and the ideas of Jimmy Bogard, that may or may not be worthwhile. He also proposes a 1:1 relationship between view and view model. In keeping with these design paradigms, I am to create a view and associated view for each of my expanding sets of fields. The view models would each be nearly identical, differing only in the fields which are read-only, the views also containing much repeated markup. This seems absurd to me. In future I may want to be able to display two, more or all sets of fields open simultaneously. I will most attentively read the discussion I hope to spark. Many thanks in advance.

    Read the article

  • C# bluetooth file send.

    - by cheesebunz
    i'm new to bluetooth development and i found the 32netfeet . Right now i'm able to search for bluetooth devices nearby and connect to them but how do i send a file e.g SendTest.txt? I tried buttonclick event using the OBEX but i don't understand this is my example code: using InTheHand.Net; using InTheHand.Net.Sockets; using InTheHand.Net.Bluetooth; namespace BluetoothIntheHand { public partial class Form2 : Form { private Guid service = BluetoothService.DialupNetworking; private BluetoothClient bluetoothClient; public Form2() { InitializeComponent(); } private void btnSearch_Click(object sender, EventArgs e) { BluetoothRadio.PrimaryRadio.Mode = RadioMode.Discoverable; BluetoothRadio myRadio = BluetoothRadio.PrimaryRadio; lblSearch.Text = "" + myRadio.LocalAddress.ToString(); bluetoothClient = new BluetoothClient(); Cursor.Current = Cursors.WaitCursor; BluetoothDeviceInfo[] bluetoothDeviceInfo = { }; bluetoothDeviceInfo = bluetoothClient.DiscoverDevices(10); comboBox1.DataSource = bluetoothDeviceInfo; comboBox1.DisplayMember = "DeviceName"; comboBox1.ValueMember = "DeviceAddress"; comboBox1.Focus(); Cursor.Current = Cursors.Default; } private void btnConnect_Click(object sender, EventArgs e) { if (comboBox1.SelectedValue != null) { try { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); MessageBox.Show("Connected"); } catch (Exception ex) { MessageBox.Show(ex.Message); } } } private void btnSend_Click(object sender, EventArgs e) { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); String addr = "112233445566"; Uri uri = new Uri("obex://"+@"SendTest.txt"); ObexWebRequest req= new ObexWebRequest(uri); ObexWebResponse rsp; } I found the guide but don't really knw hw to convert to C# ' The host part of the URI is the device address, e.g. IrDAAddress.ToString(), ' and the file part is the OBEX object name. Dim addr As String = "112233445566" Dim uri As New Uri("obex://" & addr & "/HelloWorld2.txt") Dim req As New ObexWebRequest(uri) Using content As Stream = req.GetRequestStream() ' Using a StreamWriter to write text to the stream... Using wtr As New StreamWriter(content) wtr.WriteLine("Hello World GetRequestStream") wtr.WriteLine("Hello World GetRequestStream 2") wtr.Flush() ' Set the Length header value req.ContentLength = content.Length End Using ' In this case closing the StreamWriter also closed the Stream, but ... End Using Dim rsp As ObexWebResponse = CType(req.GetResponse(),ObexWebResponse) Console.WriteLine("Response Code: {0} (0x{0:X})", rsp.StatusCode)

    Read the article

  • Why is django giving me an attribute error when I call _set.all() for its children models?

    - by user1876508
    I have two models defined from django.db import models class Blog(models.Model): title = models.CharField(max_length=144) @property def posts(self): self.Post_set.all() class Post(models.Model): title = models.CharField(max_length=144) text = models.TextField() blog = models.ForeignKey('Blog') but the problem is, when I run shell, and enter >>> blog = Blog(title="My blog") >>> post = Post(title="My first post", text="Here is the main text for my blog post", blog=blog) >>> blog.posts I get the error Traceback (most recent call last): File "<console>", line 1, in <module> File "/home/lucas/Programming/Python/Django/djangorestfun/blog/models.py", line 9, in posts self.Post_set.all() AttributeError: 'Blog' object has no attribute 'Post_set' >>> Now I am having the following problem >>> from blog.models import * >>> blog = Blog(title="gewrhter") >>> blog.save() >>> blog.__dict__ {'_state': <django.db.models.base.ModelState object at 0x259be10>, 'id': 1, 'title': 'gewrhter'} >>> blog._state.__dict__ {'adding': False, 'db': 'default'} >>> post = Post(title="sdhxcvb", text="hdbfdgb", blog=blog) >>> post.save() >>> post.__dict__ {'blog_id': 1, 'title': 'sdhxcvb', 'text': 'hdbfdgb', '_blog_cache': <Blog: Blog object>, '_state': <django.db.models.base.ModelState object at 0x259bed0>, 'id': 1} >>> blog.posts >>> print blog.posts None Second update So I followed your guide, but I am still getting nothing. In addition, blog.posts gives me an error. >>> from blog.models import * >>> blog = Blog(title="asdf") >>> blog.save() >>> post = Post(title="asdf", text="sdxcvb", blog=blog) >>> post.save() >>> blog.posts Traceback (most recent call last): File "<console>", line 1, in <module> AttributeError: 'Blog' object has no attribute 'posts' >>> print blog.all_posts None

    Read the article

  • Gwt-gdata authentication

    - by Raffo
    Hi guys, I'm writing an application with GWT and I found on the internet that there's a library to use easily gdata features. In particular I need to use the integration with Google Calendar. I followed the official guide on gwt-gdata site to do the authentication ( http://code.google.com/p/gwt-gdata/wiki/GettingStarted ) but unfortunately, I got an error. This is the error: 17:59:12.463 [ERROR] [testmappa] Unable to load module entry point class testMappa.client.TestMappa (see associated exception for details) com.google.gwt.core.client.JavaScriptException: (TypeError): $wnd.google.accounts is undefined fileName: http://127.0.0.1:8888 lineNumber: 29 stack: ("http://www.google.com/calendar/feeds/")@http://127.0.0.1:8888:29 connect("http://127.0.0.1:8888/TestMappa.html?gwt.codesvr=127.0.0.1:9997","`gL1<a3s4B&Y{(Ci","127.0.0.1:9997","testmappa","2.0")@:0 ((void 0),"testmappa","http://127.0.0.1:8888/testmappa/")@http://127.0.0.1:8888/testmappa/hosted.html?testmappa:264 z()@http://127.0.0.1:8888/testmappa/testmappa.nocache.js:2 (-2)@http://127.0.0.1:8888/testmappa/testmappa.nocache.js:8 at com.google.gwt.dev.shell.BrowserChannelServer.invokeJavascript(BrowserChannelServer.java:195) at com.google.gwt.dev.shell.ModuleSpaceOOPHM.doInvoke(ModuleSpaceOOPHM.java:120) at com.google.gwt.dev.shell.ModuleSpace.invokeNative(ModuleSpace.java:507) at com.google.gwt.dev.shell.ModuleSpace.invokeNativeObject(ModuleSpace.java:264) at com.google.gwt.dev.shell.JavaScriptHost.invokeNativeObject(JavaScriptHost.java:91) at com.google.gwt.accounts.client.User.login(User.java) at testMappa.client.TestMappa.onModuleLoad(TestMappa.java:68) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.google.gwt.dev.shell.ModuleSpace.onLoad(ModuleSpace.java:369) at com.google.gwt.dev.shell.OophmSessionHandler.loadModule(OophmSessionHandler.java:185) at com.google.gwt.dev.shell.BrowserChannelServer.processConnection(BrowserChannelServer.java:380) at com.google.gwt.dev.shell.BrowserChannelServer.run(BrowserChannelServer.java:222) at java.lang.Thread.run(Thread.java:637) I'm not able to understand the reason of this error. My code is simply: String scope = "http://www.google.com/calendar/feeds/"; User.login(scope); And as far as I know it should work as it is. I don't know what to do and I'm here to ask how to solve this problem and if I can directly use gdata native java library, but I believe this other thing is not possible to be done for client-side gwt code (since the code is going to be converted to javascript). Thank you.

    Read the article

  • Arranging models, views, controllers in a Kohana 3 project

    - by Pekka
    I'm looking at how to set up a mid-sized web application with Kohana 3. I have implemented MVC patterns in the past but never worked against a "formalized" MVC framework so I'm still getting my head around the terminology - toying around with basic examples, building views and templates, and so on. I'm progressing fairly well but I want to set up a real-world web project (one of my own that I've been planning for quite some time now) as a learning object. I learn best by example, but example-based documentation is a bit sparse for Kohana 3 right now - they say so themselves on the site. While I'm not worried about getting into the framework soon enough, I'm a bit concerned about arranging a healthily structured code base from the start - i.e. how to split up controllers, how to name them, and how to separate the functionality into the appropriate models. My application could, in its core, be described as a business directory with a main businesses table. Businesses can be listed by category and by street name. Each business has a detail page. Business owners can log in and edit their business's entry. Businesses can post offers into an offers table. I know this is pretty vague, but I don't want to cram too much information into this question. I'll be more than happy to go into more detail if needed. Supposing I have all the basic functionality worked out and in place already - list all businesses, edit business, list businesses by street name, create offer, and so on, and I'm just looking for how to fit the functionality into a MVC pattern and into a Kohana application structure that can be easily extended: Do you know real-life, publicly accessible examples of "database-heavy" applications like directories, online communities... with a log-in area built on Kohana 3 where I could take a peek how they do it? Are there conventions or best practices on how to structure an extendable login area for end users in a Kohana project that is not only able to handle a business directory page, but further products on separate pages as well? Do you know application structuring HOWTOs or best practices for Kohana 3 not mentioned in the user guide and the inofficial Wiki? Have you built something similar and could give me some recommendations?

    Read the article

  • error C2784: Could not deduce template argument

    - by atch
    Hi guys, Still fighting with templates. In this example, despite the fact that is copied straight from a book I'm getting the following error message: Error 2 error C2784: 'IsClassT<T>::One IsClassT<T>::test(int C::* )' : could not deduce template argument for 'int C::* ' from 'int'. This is an example from a book Templates - The Complete Guide. (I work with Visual Studio 2010 RC). template<typename T> class IsClassT { private: typedef char One; typedef struct { char a[2]; } Two; template<typename C> static One test(int C::*); template<typename C> static Two test(…); public: enum { Yes = sizeof(IsClassT<T>::test<T>(0)) == 1 }; enum { No = !Yes }; }; class MyClass { }; struct MyStruct { }; union MyUnion { }; void myfunc() { } enum E {e1} e; // check by passing type as template argument template <typename T> void check() { if (IsClassT<T>::Yes) { std::cout << " IsClassT " << std::endl; } else { std::cout << " !IsClassT " << std::endl; } } // check by passing type as function call argument template <typename T> void checkT (T) { check<T>(); } int main() { /*std::cout << "int: "; check<int>(); */ std::cout << "MyClass: "; check<MyClass>(); } And although I know roughly what's going on in this example I cannot fix this error. Thanks for help.

    Read the article

  • Any way to simulate MouseOver in WPF

    - by jpierson
    I'm working on a link control in WPF which fits the text with icon links case in the Windows UX Guide. What I want is to have some text within a hyperlink that appears to the right of some image. In my case I started off by using a TextBlock that contained a Hyperlink which then contained my image and some text. <TextBlock> <Hyperlink> <Rectangle Height="16" Width="16" Fill="{StaticResource MyIconBrush}" Stretch="UniformToFill" VerticalAlignment="Center" HorizontalAlignment="Left" /> <Run>My link text</Run> </Hyperlink> </TextBlock> The problem with this however was that the image being taller than my text produced an effect where the text was aligned to the bottom. Unfortunately I haven't found any way to control the vertical alignment within the TextBlock or within the Hyperlink so I've resorted to attempting an alternative layout where the Hyperlink and the Rectangle that represent my vector icon are separated in order to get them to align properly like shown below. <TextBlock> <Hyperlink> <StackPanel Orientation="Horizontal"> <Rectangle Height="16" Width="16" Fill="{StaticResource MyIconBrush}" Stretch="UniformToFill" VerticalAlignment="Center" HorizontalAlignment="Left" /> <TextBlock VerticalAlignment="Center"><Hyperlink>My link text<Hyperlink></TextBlock> </StackPanel> </Hyperlink> </TextBlock> The problem with this however is that now that my Icon and my Hyperlink are separated I don't get my MouseOver appearance of my link when I the mouse is over my icon and vise-versa. So this got me to thinking, how do I simulate MouseOver for a given control such with a checkbox where you get the MouseOver effect on the box when you actually mouse over it's associated text. I know in the HTML world the label element has a for attribute that can be used to specify which control it is labeling which will basically do what I'm looking for. Also I can imagine that in other scenarios it may be nice to have a label that when you mouse over shows a corresponding text box as if the mouse is over it and possibly when clicked focus is given to the corresponding text box as well. For now though I'm interested mainly in how to to get a label or label like element in WPF to act as a proxy for a given control in terms of it's MouseOver state. Also I would like to do this purely in XAML if possible.

    Read the article

  • Daylight saving time and Timezone best practices

    - by Oded
    I am hoping to make this question and the answers to it the definitive guide to dealing with daylight saving time, in particular for dealing with the actual change overs. If you have anything to add, please do Many systems are dependent on keeping accurate time, the problem is with changes to time due to daylight savings - moving the clock forward or backwards. For instance, one has business rules in an order taking system that depend on the time of the order - if the clock changes, the rules might not be as clear. How should the time of the order be persisted? There is of course an endless number of scenarios - this one is simply an illustrative one. How have you dealt with the daylight saving issue? What assumptions are part of your solution? (looking for context here) As important, if not more so: What did you try that did not work? Why did it not work? I would be interested in programming, OS, data persistence and other pertinent aspects of the issue. General answers are great, but I would also like to see details especially if they are only available on one platform. Summary of answers and other data: (please add yours) Do: Always persist time according to a unified standard that is not affected by daylight savings. GMT and UTC have been mentioned by different people. Include the local time offset (including DST offset) in stored timestamps. Remember that DST offsets are not always an integer number of hours (e.g. Indian Standard Time is UTC+05:30). If using Java, use JodaTime. - http://joda-time.sourceforge.net/ Create a table TZOffsets with three columns: RegionClassId, StartDateTime, and OffsetMinutes (int, in minutes). See answer Check if your DBMS needs to be shutdown during transition. Business rules should always work on civil time. Internally, keep timestamps in something like civil-time-seconds-from-epoch. See answer Only convert to local times at the last possible moment. Don't: Do not use javascript date and time calculations in web apps unless you ABSOLUTELY have to. Testing: When testing make sure you test countries in the Western and Eastern hemispheres, with both DST in progress and not and a country that does not use DST (6 in total). Reference: Olson database, aka Tz_database - ftp://elsie.nci.nih.gov/pub Sources for Time Zone and DST - http://www.twinsun.com/tz/tz-link.htm ISO format (ISO 8601) - http://en.wikipedia.org/wiki/ISO_8601 Mapping between Olson database and Windows TimeZone Ids, from the Unicode Consortium - http://unicode.org/repos/cldr-tmp/trunk/diff/supplemental/windows_tzid.html TimeZone page on WikiPedia - http://en.wikipedia.org/wiki/Tz_database StackOverflow questions tagged dst - http://stackoverflow.com/questions/tagged/dst StackOverflow questions tagged timezone - http://stackoverflow.com/questions/tagged/timezone Other: Lobby your representative to end the abomination that is DST. We can always hope...

    Read the article

  • bluetooth file send.

    - by cheesebunz
    i'm new to bluetooth development and i found the 32netfeet . Right now i'm able to search for bluetooth devices nearby and connect to them but how do i send a file e.g SendTest.txt? I tried buttonclick event using the OBEX but i don't understand this is my example code: using InTheHand.Net; using InTheHand.Net.Sockets; using InTheHand.Net.Bluetooth; namespace BluetoothIntheHand { public partial class Form2 : Form { private Guid service = BluetoothService.DialupNetworking; private BluetoothClient bluetoothClient; public Form2() { InitializeComponent(); } private void btnSearch_Click(object sender, EventArgs e) { BluetoothRadio.PrimaryRadio.Mode = RadioMode.Discoverable; BluetoothRadio myRadio = BluetoothRadio.PrimaryRadio; lblSearch.Text = "" + myRadio.LocalAddress.ToString(); bluetoothClient = new BluetoothClient(); Cursor.Current = Cursors.WaitCursor; BluetoothDeviceInfo[] bluetoothDeviceInfo = { }; bluetoothDeviceInfo = bluetoothClient.DiscoverDevices(10); comboBox1.DataSource = bluetoothDeviceInfo; comboBox1.DisplayMember = "DeviceName"; comboBox1.ValueMember = "DeviceAddress"; comboBox1.Focus(); Cursor.Current = Cursors.Default; } private void btnConnect_Click(object sender, EventArgs e) { if (comboBox1.SelectedValue != null) { try { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); MessageBox.Show("Connected"); } catch (Exception ex) { MessageBox.Show(ex.Message); } } } private void btnSend_Click(object sender, EventArgs e) { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); String addr = "112233445566"; Uri uri = new Uri("obex://"+@"SendTest.txt"); ObexWebRequest req= new ObexWebRequest(uri); ObexWebResponse rsp; } I found the guide but don't really know how to convert to C# ' The host part of the URI is the device address, e.g. IrDAAddress.ToString(), ' and the file part is the OBEX object name. Dim addr As String = "112233445566" Dim uri As New Uri("obex://" & addr & "/HelloWorld2.txt") Dim req As New ObexWebRequest(uri) Using content As Stream = req.GetRequestStream() ' Using a StreamWriter to write text to the stream... Using wtr As New StreamWriter(content) wtr.WriteLine("Hello World GetRequestStream") wtr.WriteLine("Hello World GetRequestStream 2") wtr.Flush() ' Set the Length header value req.ContentLength = content.Length End Using ' In this case closing the StreamWriter also closed the Stream, but ... End Using Dim rsp As ObexWebResponse = CType(req.GetResponse(),ObexWebResponse) Console.WriteLine("Response Code: {0} (0x{0:X})", rsp.StatusCode)

    Read the article

  • Maze Navigation in Player Stage with Roomba

    - by Scott
    Here is my code: /* Scott Landau Robot Lab Assignment 1 */ // Standard Java Libs import java.io.*; // Player/Stage Libs import javaclient2.*; import javaclient2.structures.*; import javaclient2.structures.sonar.*; // Begin public class SpinningRobot { public static Position2DInterface pos = null; public static LaserInterface laser = null; public static void main(String[] args) { PlayerClient robot = new PlayerClient("localhost", 6665); laser = robot.requestInterfaceLaser(0, PlayerConstants.PLAYER_OPEN_MODE); pos = robot.requestInterfacePosition2D(0,PlayerConstants.PLAYER_OPEN_MODE); robot.runThreaded (-1, -1); pos.setSpeed(0.5f, -0.25f); // end pos float x, y; x = 46.0f; y = -46.0f; boolean done = false; while( !done ){ if(laser.isDataReady()) { float[] laser_data = laser.getData().getRanges(); System.out.println("== IR Sensor =="); System.out.println("Left Wall Distance: "+laser_data[360]); System.out.println("Right Wall Distance: " +laser_data[0]); // if laser doesn't reach left wall, move to detect it // so we can guide using left wall if ( laser_data[360] < 0.6f ) { while ( laser_data[360] < 0.6f ) { pos.setSpeed(0.5f, -0.5f); } } else if ( laser_data[0] < 0.6f ) { while(laser_data[0<0.6f) { pos.setSpeed(0.5f, 0.5f); } } pos.setSpeed(0.5f, -0.25f); // end pos? done = ( (pos.getX() == x) && (pos.getY() == y) ); } } } } // End I was trying to have the Roomba go continuously at a slight right curve, quickly turning away from each wall it came to close to if it recognized it with it's laser. I can only use laser_data[360] and laser_data[0] for this one robot. I think this would eventually navigate the maze. However, I am using the Player Stage platform, and Stage freezes when the Roomba comes close to a wall using this code, I have no idea why. Also, if you can think of a better maze navigation algorithm, please let me know. Thank you!

    Read the article

  • Using in app purchase to unlock features vs. using free & paid app versions for iPhone

    - by yabada
    I have an app that I was going to release as a free (lite) version with some of the total functionality and a paid full version with advanced functionality. Now, with in app purchase for free apps I am thinking of going that route with the ability to unlock features as needed. I'm not talking about a trial version that expires.I want people to be able to try out the app and get an idea of the interface and functionality before deciding to purchase the full functionality of each major section of the app, basically. Here's an analogy of what my app would be like. Let's say you have a cooking app that teaches you to cook in different styles. There could be major section for French, Italian, and Chinese. Each section could have some rudiments unlocked in the free app so users can see the UI and basics of the functionality. Then, the user could decide to purchase each major section (or not) individually with in app purchase or buy the full versioned app (with the free/paid model). One concern I have with offering a free app with in app purchase would be with feedback. I would be very clear in my description in the app store that there is in app purchase for full features but I'm worried that less serious users could/would leave negative feedback. I suppose that's always a risk but curious about any experience with this. It also seems that it could be a whole lot more complicated keeping track of what portions of the app are locked and unlocked with in app purchase. I know I'd have to have all the code for the full functionality and "lock" the portions that haven't been purchased. How do people usually lock portions of their code? I'm not talking about the process of purchasing (I've read the In App Purchase Programming Guide) but after the purchase has been made. Would I just keep track of what the user has purchased and put conditionals on the sections that are initially locked? Or is there another way to do this as well? My instinct is for the in app purchase (particularly since users could purchase the major sections that they want individually).

    Read the article

  • Use a subdirectory as root with htaccess in Apache 1.3

    - by Andrew
    I'm trying to deploy a site generated with Jekyll and would like to keep the site in its own subfolder on my server to keep everything more organized. Essentially, I'd like to use the contents of /jekyll as the root unless a file similarly named exists in the actual web root. So something like /jekyll/sample-page/ would show as http://www.example.com/sample-page/, while something like /other-folder/ would display as http://www.example.com/other-folder. My test server runs Apache 2.2 and the following .htaccess (adapted from http://gist.github.com/97822) works flawlessly: RewriteEngine On # Map http://www.example.com to /jekyll. RewriteRule ^$ /jekyll/ [L] # Map http://www.example.com/x to /jekyll/x unless there is a x in the web root. RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/jekyll/ RewriteRule ^(.*)$ /jekyll/$1 # Add trailing slash to directories without them so DirectoryIndex works. # This does not expose the internal URL. RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule ^(.*)$ $1/ # Disable auto-adding slashes to directories without them, since this happens # after mod_rewrite and exposes the rewritten internal URL, e.g. turning # http://www.example.com/about into http://www.example.com/jekyll/about. DirectorySlash off However, my production server runs Apache 1.3, which doesn't allow DirectorySlash. If I disable it, the server gives a 500 error because of internal redirect overload. If I comment out the last section of ReWriteConds and rules: RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule ^(.*)$ $1/ …everything mostly works: http://www.example.com/sample-page/ displays the correct content. However, if I omit the trailing slash, the URL in the address bar exposes the real internal URL structure: http://www.example.com/jekyll/sample-page/ What is the best way to account for directory slashes in Apache 1.3, where useful tools like DirectorySlash don't exist? How can I use the /jekyll/ directory as the site root without revealing the actual URL structure? Edit: After a ton of research into Apache 1.3, I've found that this problem is essentially a combination of two different issues listed at the Apache 1.3 URL Rewriting Guide. I have a (partially) moved DocumentRoot, which in theory would be taken care of with something like this: RewriteRule ^/$ /e/www/ [R] I also have the infamous "Trailing Slash Problem," which is solved by setting the RewriteBase (as was suggested in one of the responses below): RewriteBase /~quux/ RewriteRule ^foo$ foo/ [R] The problem is combining the two. Moving the document root doesn't (can't?) use RewriteBase—fixing trailing slashes requires(?) it… Hmm…

    Read the article

  • do you want try ? [closed]

    - by gemxia
    Only with time and hard work, that can you get an IT certification. Although there are hundreds of certifications for you to pick from, the basic steps to get certified are the same. The following steps are certain to clear your puzzles about the preparation process of your <. The first step to take is choosing a certification. It is simple but at the same time very important. Make sure to choose the certifications that are respected in your industries. The second step you should take is to evaluate your experience. Find out what skills and experience the IBM certification is expecting. Then, decide what type of training is suitable for you. Preparation books will certainly not make you an expert in subjects you’re not already an expert in. But, for the subject areas you know little or nothing about, a study guide provides you clues and guidance about what the important information from those subjects is when it comes to passing the Examkiller IBM examination exam. Visit certification forums during your 000-M62 certification exam preparation. In this way, you can learn from others’ mistakes and example, meanwhile help your own studies. Achieving your goals without proper training is a sure road to failure. Knowing about a topic and having special expertise in it are completely different. One cannot be an expert in the IT industry without the proper foundation. Taking a training class for Examkiller IBM exam might be a guaranteed way. When the economy dips and budgets get tightened, one of the first things to go from corporate spending is training. There are plenty of courses, boot camps and cram sessions that promise to prepare you for the IBM exam, but they are exceptionally expensive. As much as possible, for your own benefit, you should look for resources that are free. Vendor of IBM offers free resource in their sites. These practice exams are the closest to the real exams. If you think that you have got ready for the exam, you can take the fourth now, which is registering your exam. Even if you have passed your <, yet you can’t relax, since there are still so many certifications ahead. If you have just memorized some questions and answers, excepting a fluke, then, don’t take the IBM test exam, until you really have the experience and skills the certification requires.

    Read the article

  • Unable to connect to MS Access database through JDBC on Win 7 64-bit

    - by Ninad
    Hello. I've been trying to connect to a MS Access 2007 database through JDBC. My JDK is JDK 1.6u18 64-bit and OS is Windows 7 64-bit. But problem is I am unable to create a DSN using Windows\system32\odbcad32.exe because it doesn't show ODBC drivers for MS Access at all, it's only showing drivers for MS SQL Server. When tried to click on Configure for "MS Access Database" (which is an already created DSN, I guess), it first shows error message : "The setup routines for the Microsoft Access Drivers (*.mdb, *.accdb) ODBC Driver could not be found. Please reinstall the driver." And then another message : "Errors found! The specified DSN contains an architecture mismatch between the Driver and Application." I cannot reinstall the MDAC as it doesn't work with Windows 7 (which comes with its own WDAC). The odbcad32.exe in Windows\SysWOW64 does let me create a DSN for MS Access, it shows the drivers installed properly. However, when tried to connect to that DSN through a Java program, I get the following exception : java.sql.SQLException: [Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source) at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source) at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(Unknown Source) at sun.jdbc.odbc.JdbcOdbcConnection.initialize(Unknown Source) at sun.jdbc.odbc.JdbcOdbcDriver.connect(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at AccessTest.main(AccessTest.java:19) What might be the problem and what do I have to do to get it working? My OS as well as JDK are 64-bit. Can't I connect to a Access 2007 database, which I presume is 32-bit? Any help would be highly appreciated. Also, in case one thinks this's not a right place for this question, I apologize in advance. Then please guide me to appropriate forum. Another option would be to find a third-party JDBC driver for MS Access. But I do need to know what's wrong with my configuration. :-/ PS : I know there're many better databases available out there, but for few unfortunate reasons, I have to use MS Access only and have to get it working.

    Read the article

  • Beautifulsoup recursive attribute

    - by Marcos Placona
    Hi, trying to parse an XML with Beautifulsoup, but hit a brick wall when trying to use the "recursive" attribute with findall() I have a pretty odd xml format shown below: <?xml version="1.0"?> <catalog> <book id="bk101"> <author>Gambardella, Matthew</author> <title>XML Developer's Guide</title> <genre>Computer</genre> <price>44.95</price> <publish_date>2000-10-01</publish_date> <description>An in-depth look at creating applications with XML.</description> <catalog>true</catalog> </book> <book id="bk102"> <author>Ralls, Kim</author> <title>Midnight Rain</title> <genre>Fantasy</genre> <price>5.95</price> <publish_date>2000-12-16</publish_date> <description>A former architect battles corporate zombies, an evil sorceress, and her own childhood to become queen of the world.</description> <catalog>false</catalog> </book> </catalog> As you can see, the catalog tag repeats inside the book tag, which causes an error when I try to to something like: from BeautifulSoup import BeautifulStoneSoup as BSS catalog = "catalog.xml" def open_rss(): f = open(catalog, 'r') return f.read() def rss_parser(): rss_contents = open_rss() soup = BSS(rss_contents) items = soup.findAll('catalog', recursive=False) for item in items: print item.title.string rss_parser() As you will see, on my soup.findAll I've added recursive=false, which in theory would make it no recurse through the item found, but skip to the next one. This doesn't seem to work, as I always get the following error: File "catalog.py", line 17, in rss_parser print item.title.string AttributeError: 'NoneType' object has no attribute 'string' I'm sure I'm doing something stupid here, and would appreciate if someone could give me some help on how to solve this problem. Changing the HTML structure is not an option, this this code needs to perform well as it will potentially parse a large XML file. Thanks in advance, Marcos

    Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >