Search Results

Search found 10320 results on 413 pages for 'disconnected session'.

Page 201/413 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

  • HP D530 Startup Error: 512 - Chassis Fan Not Detected

    - by lyrikles
    I'm using the HP D530 Motherboard/CPU that I installed in a new case with a 600W PSU. There was a problem with the onboard chassis fan connector (3-wire) not supplying sufficient power to the chassis fan indicated by the fan spinning very slowly, but I never experienced the "512 Error" at boot. Also, the same fan works perfectly connected directly to the PSU. I disconnected it since I already have plenty of fans connected via the PSU directly. Since then, on startup, I get the error: "512 - Chassis Fan Not Detected" and am asked to "Press F1 to continue". This gets quite annoying since I use this machine remotely (w/ FreeNAS). What could be causing the onboard fan connector to not be giving enough power? If this is unable to be corrected, how can I make the BIOS think there's a chassis fan plugged in without actually plugging a fan into the onboard connector? Would it be possible to jumper the pins without damaging the motherboard or PSU? Thanks,Erik

    Read the article

  • Ammy admin - remote desktop is unavailable error after connect

    - by javapowered
    I'm using Ammyy Admin. I've set all permisions. However once connected I receive "Remote desktop is unavailable" message. Why and how to fix this? upd if I have windows rdp connected then I'm able to use ammyy admin rdp. But once i disconnect windows rdp, ammyy admin rdp is also disconnected. This is strange and makes ammyy admin useless (in my configuration). I need ammyy admin rdp to work even if windows rdp is not connected.

    Read the article

  • Laravel Forge SSH on windows not recognized

    - by alysdal
    I decided to try out the Laravel Forge, but I'm having trouble with the SSH keys. I use digitalocean.com for the VMs and have used SSH keys with success many times before. However when I paste my public key into Forge (which adds it to the server) I'm not able to connect to it. I use Putty and I get the following error: Disconnected: No supported authentication methods available (server sent: publickey) Key was generated using puttygen and was added to pageant. I have tried using the very same key files as my other VM and tried creating a new one, but all without luck. I'm hoping someone can help me out here. Edit: here is my putty log http://pastebin.com/ZGmm8Mcv

    Read the article

  • FTP connection is aborted

    - by Conrad C
    I want to connect using FTP to my webpage hosted on ipages.com , but I always get this error on filezilla.: Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 550 PWD: Permission denied Error: Failed to retrieve directory listing Error: Disconnected from server: ECONNABORTED - Connection aborted It looks like the connection is established but then disconnects. Is it an issue with the host? I use the default port 21. The user-pass is working. And the ftp adress is ftp.mysite.com I tested the port 21 using netstat and I get 220 Ipage FTP Server Ready

    Read the article

  • Socket(TCPIP) Unstable

    - by Lee Kwan Wee
    I have a setup of a SCPI server in a Win7 PC and have 2 other programs talking to it locally(127.0.0.1) over TCPIP socket 5025 and 5029. This worked well and stable in a fresh PC, but when we moved it into our production lines and the IT dept added their policies and stuff, it became unstable. The PC is connected to the production floor server but both of the programs are running locally in the PC. The connection tends to be disconnected when there is an idle period. And it takes 5-6times to refreshing the connection to get it back. I'm not a programmer myself, so I'm hoping to see if anyone here can help with some answers. Thank you very much!! Regards, KwanWee.

    Read the article

  • Windows 7 installation reboot loop

    - by Auswoolf
    Upgrading from Vista home premium to win 7 hoe premium from DVD ex Digital river on gigabyte VM900m; core 2 duo 2.13GHz 2GB ram; Western digital 250GB HD. Got as far as "Expanding Windows files ...100% the error message "Computer encountered unexpected error... To install windows press OK to restart computer and reinstall windows" The computer then reboots, loads Windows 7 (new logo) a essage that says "setup is starting services" then the error message comes back. I can get into BIOS to change boot priority but the computer just ignores this and goes through the same sequence. At the point of "to boot from CD/DVD press any key" my keyboard is deactivated and i cannot make a choice and the sae sequence occurs. I cannot break the sequence - I have push every key, disconnected every external device including HDMI screen, but nothing stops the loop. Any ideas? Auswoolf

    Read the article

  • OpenWrt logging: how to find out "wifi deauthentication"

    - by user62367
    If someone starts to use the wifi, i can see that with logread: Jan 23 21:04:47 router daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: authenticated But how can i see, that he/she's disconnecting? Theres no "bla-bla deauthenticated bla" line in logread, or even a thing that points to that someone get's disconnected.. I tried to google: http://wiki.openwrt.org/doc/uci/system But it doesn't writes about loglevel. Can anyone help me find out, how to find out that someone disconnects it's wifi from the router? The logread doesn't even writes a line when someone disconnects. Please help!! It's important! Thank you!:\

    Read the article

  • Aventail VPN connect on Mac OS X 10.6.2 Snow Leopard

    - by Warlax
    Hello, I am running Mac OS X Snow Leopard (10.6.2). Recently, my company switched (for whatever odd reason) from Cisco VPN (that used to work fine) to Aventail VPN. I proceeded to install the Aventail VPN client on both the mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get the following page: http://grab.by/2WOA It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless and I was hoping fellow super users can help. Thanks.

    Read the article

  • Ethernet interface number changed, and old one does not exist, but does not leave IP address

    - by Sagar
    I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

    Read the article

  • Unable to ping local machines by name in Windows 7

    - by aardvarkk
    I'm having a strange (and persistent!) problem with pinging local machines on my network by name. I believe my machine (Windows 7 64-bit) is the only one having this issue. This is over a wireless connection. As an example, consider a device on my network by the name of WDTVLiveHub. It's a Western Digital Live Hub (surprise!). If I go to my router's DHCP Client Table in the browser (my router is a WRT400N), I see this entry: WDTVLiveHub 192.168.1.101 Great. So I try to ping that IP address: ping 192.168.1.101 Pinging 192.168.1.101 with 32 bytes of data: Reply from 192.168.1.101: bytes=32 time=9ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Ping statistics for 192.168.1.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 16ms, Average = 14ms OK, still looking good. Now I try to ping it by name: ping WDTVLiveHub Ping request could not find host WDTVLiveHub. Please check the name and try again. From what I've read, this implies a problem with DNS servers and host name lookups. Interestingly, if I type the following: pathping 192.168.1.101 I get this output: Tracing route to WDTVLIVEHUB [192.168.1.101] over a maximum of 30 hops: 0 Scotty [192.168.1.103] 1 WDTVLIVEHUB [192.168.1.101] Computing statistics for 25 seconds... Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 Scotty [192.168.1.103] 1/ 100 = 1% | 1 12ms 1/ 100 = 1% 0/ 100 = 0% WDTVLIVEHUB [192.168.1.101] Trace complete. Scotty is obviously the name of my local machine. So it's able to find the name somehow when I do that approach... ipconfig /all shows the following under DNS servers: DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** Where the * represents the same DNS servers that show up in my router under DNS 1 and DNS 2 through the Internet. For completeness, here's the whole output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : Scotty Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Peer-Peer IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 0C-EE-E6-D1-07-E8 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2002:d83a:31e5:1234:5592:398e:8968:43d1(Preferred) Temporary IPv6 Address. . . . . . : 2002:d83a:31e5:1234:ecce:2f79:72a5:5273(Preferred) Link-local IPv6 Address . . . . . : fe80::5592:398e:8968:43d1%26(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : September-17-12 11:05:57 PM Lease Expires . . . . . . . . . . : September-18-12 11:05:57 PM Default Gateway . . . . . . . . . : fe80::200:ff:fe00:0%26 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 537718502 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VirtualBox Host-Only Network: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter Physical Address. . . . . . . . . : 08-00-27-00-98-9A DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::b48a:916b:c0f:fb29%23(Preferred) Autoconfiguration IPv4 Address. . : 169.254.251.41(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 570949671 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{55899375-C31D-4173-A529-4427D63FD28B}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{64B8F35F-A6AB-4D6B-B1D5-DD95F57B1458}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Not sure exactly how to diagnose exactly what's going on... but the problem is really frustrating! The biggest problem is that my mapped network drives have to be done by IP, and then any time the router assigns new IP addresses to those devices, all of my network shares break again. Stinks! Would love some assistance on possible solutions. I've tried all of this netsh catalog resetting and that didn't seem to fix anything at all. Would love an explanation of what's going wrong, too, rather than blindly resetting things! Thanks!

    Read the article

  • USB hard drive doesn't graceful power off after eject on Windows 7

    - by Sim
    I have a couple of Seagate FreeAgent Go external USB hard drives and would like them to gracefully power off after ejecting in Windows 7. With Windows XP a few seconds after they are ejected they gracefully power off. When ejecting them on Windows 7 they just stay on and have to be physically disconnected before they lose power. I have checked the hard drive removal policy and it is set to quick removal. I have also looked in the Seagate forums but I couldn't find any info on this so I thought I'd ask the SuperUser community on any ideas why the difference and how to get the same behaviour in Windows 7 as in XP? Update: I am finding that this also happens with USB thumb drives as well. My current theory is that there were changes to the driver model with Vista/Win 7 that haven't been reflected in the device drivers yet. So things that worked under XP don't under Win7 as the drivers haven't been updated for the new model. Does that sound right?

    Read the article

  • Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

    - by Di
    I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

    Read the article

  • My acer aspire laptop suddenly stopped working, just a blank screen

    - by mazda
    My acer aspire laptop suddenly stopped working while it was connected to my nokia mobile modem through usb. It stopped with power swich staying on and no response to clicking off, no irregular sound, nothing but just a blank screen. I disconnected the power and battery quickly but power switch did not respond at all and even the power indicator didn't turn on again. the display was also gone after disconecting the power and removing battery. It has no response or any sign of power while both battery and power supply are working. What do you think? A completely dead mainboard? Does the MB has any safty board or fuse that could be replaced? Any suggestion will be appreciated, Thank you.

    Read the article

  • Problems accessing FileZilla FTP Server from static IP

    - by Kurru
    I'm trying to connect to my FTP server from my external IP address on Comcast Business. On the gateway I've set up port-forwarding on ports 20-21 to my server. Additionally I've forwarded ports 7000-8000 to my server for use in passive mode. In my FileZilla Server application I've set up passive mode to use my static IP and to use the subset of ports listed above. Unfortunately, it doesn't work through the external static IP for some reason, but I can internally. When I try to connect through static IP, the FileZila monitor says Connected, sending welcome message.... 220 FileZillaServer version 0.9.37 beta could not send reply, disconnected My firewall doesn't register any block events and windows firewall is disabled. What am I doing wrong or missing?

    Read the article

  • Again WPA Connection problem even after changed to latest version ..please help

    - by Renjith G
    I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

    Read the article

  • Network / Internet diagnostic tool to locate an error?

    - by Jesper
    Hi, I’m facing some difficulties with the Internet / network at my work and I have trouble locating the precise error and when and how it occurs. The problem is that the client machines in the house sporadic is disconnected to the Internet. I’m some what new so I haven’t that much inside in the network and apparently neither has my predecessor. What I am requesting and hoping you guys knows about is, if there exist some kind of network monitor tool I can install and run and it will periodically check the network, the Internet connection etc. and record to logs. Then, if there suddenly arises a problem some time of the day in some part of the network or the Internet connection, I can check it perhaps the next day. I’ve just downloaded and installed Microsoft Network Monitor 3.3 application and hopeful it can give me some answers on where the instability is located but I still would like a tool to make different checks and test in some time interval. Do anyone know about such a program or another kind of performance / diagnostic tool / method I can use? Sincere Jesper

    Read the article

  • Disk space consumed

    - by aravind-zoniac
    I have a very serious problem here in one of my client server. The remote server is installed with REDHAT ES 5.2 and we have a postgresql as database. I was trying to clone the database. The hard drive had 32 GB of free space before taking clone. I started cloning the database and during the process, there was some internet issue and due to this, putty got disconnected before taking clone. So I opened another fresh session and I was able to see only 2.5GB as available space. Also I was not able to see the clone in the psql terminal. Any solution to get the 29GB that was consumed????

    Read the article

  • Programmatically get the WLAN config of a machine and use netsh to setup new profile

    - by Maestro1024
    How can I programmatically get the wireless LAN configuration of a machine and use netsh to setup new profile? I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How can I get my SSID set and connected for the card?

    Read the article

  • Change the order of DNS lookup when connected in the VPN

    - by qwerty2010
    Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

    Read the article

  • Firefox 3.5.6 Uninstaller not working

    - by Wesley
    Hi all, I want to uninstall Firefox 3.5.6 in favor of Opera 10.10. However, I've went into Control Panel Add or Remove Programs and tried clicking Remove from there, but nothing happens. I go into the Program Files for FIrefox and find the Uninstaller folder and click the helper.exe found in there. Still, nothing happens. Is there some possible way to uninstall Firefox without screwing up the rest of my computer? Computer is a EMACHINES T2482: http://emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T2482 RAM has been upgraded to 1 GB PC3200 DDR, GPU has been upgraded to 128MB GeForce 6200, HDD has been upgraded to 160 GB, PSU has been upgraded to 350W and Floppy and DVD Reader have been disconnected from mobo and power. OS is XP Pro SP3

    Read the article

  • SQLServer 2008 Fails to start under NT AUTHORITY/NETWORK SERVICE account

    - by braincells2pixels
    Not sure what changed but looks like my security credentials have been monkeyed with. Since yesterday evening after I disconnected from our corporate network and rebooted my laptop at home, I am unable to start the instance of SQL2K8. The service is set to run under NT AUTHORITY\NETWORK SERVICE account. The event log records an Access Denied error on the Master.mdf. Switching the account to Local System starts the service but our application runs into security errors. Any clues? TIA

    Read the article

  • Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

    - by Di
    I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

    Read the article

  • DNS server failure when forwarding

    - by Abraham Katz
    I run Bind 9 on a Ubuntu 12.04 server. I want this server to be a sort of a "wrapper" over my default server, so that it will respond to "domain_name.My_TLD" itself and forward requests to any other request. The server resides in a domain (Disconnected from the internet), so I configured it to zone "company_domain."{ type forward; forwarders { 1.2.3.4 }; #the DC's ip }; When i query it about sommething.company_domain. it sends a query to the DC and gets a response, but it returns "server failure". What can cause that? Cheers, Abraham

    Read the article

  • Applications don't see mapped network drive after waking from sleep

    - by Chris
    I have a network share mapped as a drive letter on a Windows 7 PC that's part of a simple home network. When I wake the PC from sleep, Explorer sometimes says the drive is disconnected. Doubleclicking the drive connects it instantly, as far as Explorer is concerned. But some other applications don't see the drive unless I take additional steps (e.g., navigate to the drive in an "Open..." dialog). Is there any way to get the drive to be connected for all purposes immediately when resuming from standby? I've found the "Always wait for the network at computer startup and logon" item in Group Policy, but I'm not sure what the setting does or whether it would fix this problem. I have network discovery enabled and un-firewalled.

    Read the article

  • VPN Server Problem

    - by vikas-2007bajaj
    Hi, I have Configure VPN Server for Online share Trading. I have so many VPN Clients in my VPN Server. Sometimes my VPN Clients disconnected from Systems but it shows in system tray i.e. connected but we are not able to access my application on the server.Then I disabled my Local area connection on client machine but it doesn't effect until I restart my System again.Firstly I want to know Task Manager Service for my VPN Client & how this problem can be remove.Waiting for reply. Thanks, Vikas Bajaj

    Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >