Search Results

Search found 23762 results on 951 pages for 'network speed'.

Page 201/951 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Friday Tips #33

  - by Chris Kawalek

  Happy Friday, everyone! Our tip this week is from an excellent white paper written by our own Greg King titled Oracle VM 3: Building a Demo Environment using Oracle VM VirtualBox. In it, Greg gives you everything you need to know to set up Oracle VM Server inside of Oracle VM VirtualBox for testing and demoing. The section we're highlighting below is on how to configure the network interfaces of your virtual machines: VirtualBox comes with a few different types of network interfaces that can be used to allow communication between the VM guests and the host operating system, including network interfaces that will allow the VM guests to communicate with local and wide area networks accessed from your laptop or personal computer. However, for the purpose of the demonstration environment we will limit the network communication to include access just between your desktop and the virtual machines being managed by VirtualBox. The install process for Oracle VM VirtualBox creates a single host-only network device on your laptop or personal computer. Using the host-only network device will allow you to open a browser on your desktop to access the Oracle VM Manager running within the VirtualBox VM guest. The device will only allow network traffic between the VM guests and your host operating system, but nothing outside the confines of your laptop or personal computer. We will need to add a second host-only network since the Oracle VM Server appliance has both eth0 and eth1 configured. You can choose to use eth1 on the Oracle VM Servers or not use them – the choice is yours. But, at least the host side network device will exist if you decide to use it. Greg goes on to describe in detail how to setup the network interfaces, so you can head on over to the paper and get even more info. See you next week! -Chris 

  Read the article

• SQL SERVER – Speed Up! – Parallel Processes and Unparalleled Performance – TechEd 2012 India

  - by pinaldave

  TechEd India 2012 is just around the corner and I will be presenting there on two different session. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. Just like doctors I like to call my every attempt to improve the performance of SQL Server queries and database server as a practice too. I have been working with SQL Server for more than 8 years and I believe that many of the performance tuning concept I have mastered. However, performance tuning is not a simple subject. However there are occasions when I feel stumped, there are occasional when I am not sure what should be the next step. When I face situation where I cannot figure things out easily, it makes me most happy because I clearly see this as a learning opportunity. I have been presenting in TechEd India for last three years. This is my fourth time opportunity to present a technical session on SQL Server. Just like every other year, I decided to present something different, something which I have spend years of learning. This time, I am going to present about parallel processes. It is widely believed that more the CPU will improve performance of the server. It is true in many cases. However, there are cases when limiting the CPU usages have improved overall health of the server. I will be presenting on the subject of Parallel Processes and its effects. I have spent more than a year working on this subject only. After working on various queries on multi-CPU systems I have personally learned few things. In coming TechEd session, I am going to share my experience with parallel processes and performance tuning. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get maximum performance out of any query – one has to master various aspects of the parallel processes. In this deep dive session, we will explore this complex subject with a very simple interactive demo. An attendee will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Please submit your questions in the comments area and I will be for sure discussing them during my session. If I pick your question to discuss during my session, here is your gift I commit right now – SQL Server Interview Questions and Answers Book. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• How to compare speed of graphics cards in Windows desktop environment?

  - by Al Kepp

  I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

  Read the article

• How to create a Semantic Network like wordnet based on Wikipedia?

  - by Forbidden Overseer

  I am an undergraduate student and I have to create a Semantic Network based on Wikipedia. This Semantic Network would be similar to Wordnet(except for it is based on Wikipedia and is concerned with "streams of text/topics" rather than simple words etc.) and I am thinking of using the Wikipedia XML dumps for the purpose. I guess I need to learn parsing an XML and "some other things" related to NLP and probably Machine Learning, but I am no way sure about anything involved herein after the XML parsing. Is the starting step: XML dump parsing into text a good idea/step? Any alternatives? What would be the steps involved after parsing XML into text to create a functional Semantic Network? What are the things/concepts I should learn in order to do them? I am not directly asking for book recommendations, but if you have read a book/article that teaches any thing related/helpful, please mention them. This may include a refernce to already existing implementations regarding the subject. Please correct me if I was wrong somewhere. Thanks!

  Read the article

• Rough estimate for speed advantage of SAN-via-fibre to san-via-iSCSI when using VMware vSphere

  - by Dirk Paessler

  We are in the process of setting up two virtualization servers (DELL R710, Dual Quadcore Xeon CPUs at 2.3 Ghz, 48 GB RAM) for VMware VSphere with storage on a SAN (DELL Powervault MD3000i, 10x 500 GB SAS drives, RAID 5) which will be attached via iSCSI on a Gbit Ethernet Switch (DELL Powerconnect 5424, they call it "iSCSI-optimized"). Can anyone give an estimate how much faster a fiber channel based solution would be (or better "feel")? I don't mean the nominal speed advantage, I mean how much faster will virtual machines effectively work? Are we talking twice the speed, five times, 10 times faster? Does it justify the price? PS: We are not talking about heavily used database servers or exchange servers. Most of the virtualized servers run below 3-5% average CPU load.

  Read the article

• SQL SERVER – #TechEdIn – Presenting Tomorrow on Speed Up! – Parallel Processes and Unparalleled Performance at TechEd India 2012

  - by pinaldave

  Performance tuning is always a very hot topic when it is about SQL Server. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. However, in India, it’s actually the very first time someone is presenting on this interesting subject, so this time I had the biggest challenge to present this session. Frequently enough, we get these two kind of questions: How to turn off parallelism as it is reducing performance? How to turn on parallelism as I want more performance? The reality is that not everyone knows what exactly is needed by their system. In this session, I have attempted to answer this very question. I’ve decided to provide a balanced view but stay away from theory, which leads us to say “It depends”. The session will have a clear message about this towards its end. Deck Details Slides: 45+ Demos: 7+ Bonus Quiz: 5 Images: 10+ Session delivery time: 52 Mins + 8 Mins of Q & A I have presented this session a couple of times to my friends and so far have received good feedback. Oftentimes, when people hear that I am going to present 45 slides, they all say it is too much to cover. However, when I am done with the session the usual reaction is that I truly gave justice to those slides. Action Item Here are a few of the action items for all of those who are going to attend this session: If you want to attend the session, just come early. There’s a good chance that you may not get a seat because right before me, there is a session from SQL Guru Vinod Kumar. He performs a powerful delivery of million concepts in just a little time. Quiz. I will be asking few questions during the session as well as before the session starts. If you get the correct answer, I will give unique learning material for you. You may not want to miss this learning opportunity at any cosst. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU, More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get a maximum performance out of any query, one has to master various aspects of the parallel processes. In this deep-dive session, we will explore this complex subject with a very simple interactive demo. Attendees will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• How can you control the speed of fan that comes with the Antec Sonata III case from the outside?

  - by Emil Lerch

  The Antec Sonata III case comes with a nice 120mm fan that has a 3 speed switch. Most of the time the fan is fine on low, but for games or other taxing workloads I need to switch it to medium or high. Opening the case every time I want to change the setting is kind of a pain. Has anyone figured out a way to control the speed from the outside of the case without going nuclear (e.g. cutting holes in the case)? Other than this annoyance I like the case and the fan that comes with it.

  Read the article

• Computer Networks UNISA - Chap 14 &ndash; Insuring Integrity &amp; Availability

  - by MarkPearl

  After reading this section you should be able to Identify the characteristics of a network that keep data safe from loss or damage Protect an enterprise-wide network from viruses Explain network and system level fault tolerance techniques Discuss issues related to network backup and recovery strategies Describe the components of a useful disaster recovery plan and the options for disaster contingencies What are integrity and availability? Integrity – the soundness of a networks programs, data, services, devices, and connections Availability – How consistently and reliably a file or system can be accessed by authorized personnel A number of phenomena can compromise both integrity and availability including… security breaches natural disasters malicious intruders power flaws human error users etc Although you cannot predict every type of vulnerability, you can take measures to guard against the most damaging events. The following are some guidelines… Allow only network administrators to create or modify NOS and application system users. Monitor the network for unauthorized access or changes Record authorized system changes in a change management system’ Install redundant components Perform regular health checks on the network Check system performance, error logs, and the system log book regularly Keep backups Implement and enforce security and disaster recovery policies These are just some of the basics… Malware Malware refers to any program or piece of code designed to intrude upon or harm a system or its resources. Types of Malware… Boot sector viruses Macro viruses File infector viruses Worms Trojan Horse Network Viruses Bots Malware characteristics Some common characteristics of Malware include… Encryption Stealth Polymorphism Time dependence Malware Protection There are various tools available to protect you from malware called anti-malware software. These monitor your system for indications that a program is performing potential malware operations. A number of techniques are used to detect malware including… Signature Scanning Integrity Checking Monitoring unexpected file changes or virus like behaviours It is important to decide where anti-malware tools will be installed and find a balance between performance and protection. There are several general purpose malware policies that can be implemented to protect your network including… Every compute in an organization should be equipped with malware detection and cleaning software that regularly runs Users should not be allowed to alter or disable the anti-malware software Users should know what to do in case the anti-malware program detects a malware virus Users should be prohibited from installing any unauthorized software on their systems System wide alerts should be issued to network users notifying them if a serious malware virus has been detected. Fault Tolerance Besides guarding against malware, another key factor in maintaining the availability and integrity of data is fault tolerance. Fault tolerance is the ability for a system to continue performing despite an unexpected hardware or software malfunction. Fault tolerance can be realized in varying degrees, the optimal level of fault tolerance for a system depends on how critical its services and files are to productivity. Generally the more fault tolerant the system, the more expensive it is. The following describe some of the areas that need to be considered for fault tolerance. Environment (Temperature and humidity) Power Topology and Connectivity Servers Storage Power Typical power flaws include Surges – a brief increase in voltage due to lightening strikes, solar flares or some idiot at City Power Noise – Fluctuation in voltage levels caused by other devices on the network or electromagnetic interference Brownout – A sag in voltage for just a moment Blackout – A complete power loss The are various alternate power sources to consider including UPS’s and Generators. UPS’s are found in two categories… Standby UPS – provides continuous power when mains goes down (brief period of switching over) Online UPS – is online all the time and the device receives power from the UPS all the time (the UPS is charged continuously) Servers There are various techniques for fault tolerance with servers. Server mirroring is an option where one device or component duplicates the activities of another. It is generally an expensive process. Clustering is a fault tolerance technique that links multiple servers together to appear as a single server. They share processing and storage responsibilities and if one unit in the cluster goes down, another unit can be brought in to replace it. Storage There are various techniques available including the following… RAID Arrays NAS (Storage (Network Attached Storage) SANs (Storage Area Networks) Data Backup A backup is a copy of data or program files created for archiving or safekeeping. Many different options for backups exist with various media including… These vary in cost and speed. Optical Media Tape Backup External Disk Drives Network Backups Backup Strategy After selecting the appropriate tool for performing your servers backup, devise a backup strategy to guide you through performing reliable backups that provide maximum data protection. Questions that should be answered include… What data must be backed up At what time of day or night will the backups occur How will you verify the accuracy of the backups Where and for how long will backup media be stored Who will take responsibility for ensuring that backups occurred How long will you save backups Where will backup and recovery documentation be stored Different backup methods provide varying levels of certainty and corresponding labour cost. There are also different ways to determine which files should be backed up including… Full backup – all data on all servers is copied to storage media Incremental backup – Only data that has changed since the last full or incremental backup is copied to a storage medium Differential backup – Only data that has changed since the last backup is coped to a storage medium Disaster Recovery Disaster recovery is the process of restoring your critical functionality and data after an enterprise wide outage has occurred. A disaster recovery plan is for extreme scenarios (i.e. fire, line fault, etc). A cold site is a place were the computers, devices, and connectivity necessary to rebuild a network exist but they are not appropriately configured. A warm site is a place where the computers, devices, and connectivity necessary to rebuild a network exists with some appropriately configured devices. A hot site is a place where the computers, devices, and connectivity necessary to rebuild a network exists and all are appropriately configured.

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• How to control fan speed on Compaq Presario under Ubuntu?

  - by Josh

  I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensores-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)

  Read the article

• Viewport / Camera Calculation in 2D Game

  - by Dave

  we have a 2D game with some sprites and tiles and some kind of camera/viewport, that "moves" around the scene. so far so good, if we wouldn't had some special behaviour for your camera/viewport translation. normally you could stick the camera to your player figure and center it, resulting in a very cheap, undergraduate, translation equation, like : vec_translation -/+= speed (depending in what keys are pressed. WASD as default.) buuuuuuuuuut, we want our player figure be able to actually reach the bounds, when the viewport/camera has reached a maximum translation. we came up with the following solution (only keys a and d are the shown here, the rest is just adaption of calculation or maybe YOUR super-cool and elegant solution :) ): if(keys[A]) { playerX -= speed; if(playerScreenX <= width / 2 && tx < 0) { playerScreenX = width / 2; tx += speed; } else if(playerScreenX <= width / 2 && (tx) >= 0) { playerScreenX -= speed; tx = 0; if(playerScreenX < 0) playerScreenX = 0; } else if(playerScreenX >= width / 2 && (tx) < 0) { playerScreenX -= speed; } } if(keys[D]) { playerX += speed; if(playerScreenX >= width / 2 && (-tx + width) < sceneWidth) { playerScreenX = width / 2; tx -= speed; } if(playerScreenX >= width / 2 && (-tx + width) >= sceneWidth) { playerScreenX += speed; tx = -(sceneWidth - width); if(playerScreenX >= width - player.width) playerScreenX = width - player.width; } if(playerScreenX <= width / 2 && (-tx + width) < sceneWidth) { playerScreenX += speed; } } i think the code is rather self explaining: keys is a flag container for currently active keys, playerX/-Y is the position of the player according to world origin, tx/ty are the translation components vital to background / npc / item offset calculation, playerOnScreenX/-Y is the actual position of the player figure (sprite) on screen and width/height are the dimensions of the camera/viewport. this all looks quite nice and works well, but there is a very small and nasty calculation error, which in turn sums up to some visible effect. let's consider following piece of code: if(playerScreenX <= width / 2 && tx < 0) { playerScreenX = width / 2; tx += speed; } it can be translated into plain english as : if the x position of your player figure on screen is less or equal the half of your display / camera / viewport size AND there is enough space left LEFT of your viewport/camera then set players x position on screen to width half, increase translation (because we subtract the translation from something we want to move). easy, right?! doing this will create a small delta between playerX and playerScreenX. after so much talking, my question appears now here at the bottom of this document: how do I stick the calculation of my player-on-screen to the actual position of the player AND having a viewport that is not always centered aroung the players figure? here is a small test-case in processing: http://pastebin.com/bFaTauaa thank you for reading until now and thank you in advance for probably answering my question.

  Read the article

• Ops Center 12c - Update - Provisioning Solaris on x86 Using a Card-Based NIC

  - by scottdickson

  Last week, I posted a blog describing how to use Ops Center to provision Solaris over the network via a NIC on a card rather than the built-in NIC.  Really, that was all about how to install Solaris on a SPARC system.  This week, we'll look at how to do the same thing for an x86-based server. Really, the overall process is exactly the same, at least for Solaris 11, with only minor updates. We will focus on Solaris 11 for this blog.  Once I verify that the same approach works for Solaris 10, I will provide another update. Booting Solaris 11 on x86 Just as before, in order to configure the server for network boot across a card-based NIC, it is necessary to declare the asset to associate the additional MACs with the server.  You likely will need to access the server console via the ILOM to figure out the MAC and to get a good idea of the network instance number.  The simplest way to find both of these is to start a network boot using the desired NIC and see where it appears in the list of network interfaces and what MAC is used when it tries to boot.  Go to the ILOM for the server.  Reset the server and start the console.  When the BIOS loads, select the boot menu, usually with Ctrl-P.  This will give you a menu of devices to boot from, including all of the NICs.  Select the NIC you want to boot from.  Its position in the list is a good indication of what network number Solaris will give the device. In this case, we want to boot from the 5th interface (GB_4, net4).  Pick it and start the boot processes.  When it starts to boot, you will see the MAC address for the interface Once you have the network instance and the MAC, go through the same process of declaring the asset as in the SPARC case.  This associates the additional network interface with the server.. Creating an OS Provisioning Plan The simplest way to do the boot via an alternate interface on an x86 system is to do a manual boot.  Update the OS provisioning profile as in the SPARC case to reflect the fact that we are booting from a different interface.  Update, in this case, the network boot device to be GB_4/net4, or the device corresponding to your network instance number.  Configure the profile to support manual network boot by checking the box for manual boot in the OS Provisioning profile. Booting the System Once you have created a profile and plan to support booting from the additional NIC, we are ready to install the server. Again, from the ILOM, reset the system and start the console.  When the BIOS loads, select boot from the Boot Menu as above.  Select the network interface from the list as before and start the boot process.  When the grub bootloader loads, the default boot image is the Solaris Text Installer.  On the grub menu, select Automated Installer and Ops Center takes over from there. Lessons The key lesson from all of this is that Ops Center is a valuable tool for provisioning servers whether they are connected via built-in network interfaces or via high-speed NICs on cards.  This is great news for modern datacenters using converged network infrastructures.  The process works for both SPARC and x86 Solaris installations.  And it's easy and repeatable.

  Read the article

• Will adding extra RAM in my computer speed it up?

  - by Harry Simpson

  I have a 5 year old Dell Inspiron 530 desktop computer which is slowly grinding to a halt. Someone told me if i put extra RAM in itll speed it up. Inside the computer there are four slots for memory but only two has memory in them and they are 1GB each. if i bought another 2no. 1GB and put them in the free slots would it speed the computer up (would it be twice as fast?) and is it as simple as just putting them in or is there other things i need to do?

  Read the article

• How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

  - by igoryonya

  I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

  Read the article

• UBUNTU's Network Connection Manger can't detect Huawei ETS2051 Modem device!

  - by Doctoa

  I have a modem device called Huawei ETS2051 and the Network Connection Manger can't detect it, but when I use Gnome-PPP it work fine but the problem is when I use Gnome-PPP; apps like Ubuntu software Center Can't reconice that's Iam connecting to the Internet so the app is just act like it's offline while other apps like web browsers and IM's work good under Gnome-PPP. any way what I want is to have a Full Ubuntu experince by making The Network Connection Manger detect my ETS2051. I have another 3G USB modem and The Network Connection Manger detect it and it's work just fine but the internet price for this one is high and I can't effort it so am count on that ETS2051 modem as you can see for it's low price and stable internet speed that satesfy my needs. More information: Gnome-PPP is a GUI for wvdial. the ETS2051 modem use a serial USB port. I have a Windows driver CD for the device. I have also find This qustion about the software Center acting like it's offline around wvdial and there's this launchpad bug. and am really insest to use Ubuntu Software Center so please no other software manger apps recomendation... I've also this Genius ColorPage HR6X Slim scanner that's Ubuntu can't detect it, so if you interset you can check and answer the qustion from here...

  Read the article

• Why am I getting [mount error(22): Invalid argument] while trying to mount SMB network drive?

  - by Steve_

  Disclaimer: I am very new to Linux :) Anyway, onward: I have a fresh instance of Ubuntu Server (12.04.1 LTS) running on my network and I want to mount a network drive to the server so I can access the contents. The network drive is a SAMBA compatible drive running Darwin OS. If I run the following command: smbclient -L //192.168.0.2 -U myuser It prompts me for the password and then displays output similar to: Domain=[SERVER01] OS=[Darwin] Server=[@(#)PROGRAM:smbd PROJECT:smbx-105.4.0] Sharename Type Comment --------- ---- ------- Comp Staff's Public Folder Disk CompRaid03 Disk Dropbox Disk Groups Disk IPC$ IPC Public Disk Users Disk compstaff Disk However, when I try and mount the CompRaid03 share, using this command: sudo mount -t cifs //192.168.0.2/CompRaid03 /mnt/myshare -o username=myuser I get the same password prompt, but after putting the correct password in, I received this error: mount error(22): Invalid argument dmesg | tail returns: [23576.037373] CIFS VFS: cifs_mount failed w/return code = -22 I don't understand what is wrong with this command. I've managed to mount a share on my current (Windows 8) machine using basically the same command but with a different IP address and share name (obviously). I've spent a good few hours trying to solve this and got no where. Any help or pointers would be greatly appreciated. Thanks Steve EDIT As suggested I've also trued using "user=" instead of "username=": sudo mount -t cifs //192.168.0.2/CompRaid03 /mnt/svnrepo -o user=myuser This results in the same "Invalid argument" error.

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• Biztalk Server 2009 - Failover Clustering and Network Load Balancing (NLB)

  - by FullOfQuestions

  Hi, We are planning a Biztalk 2009 set up in which we have 2 Biztalk Application Servers and 2 DB Servers (DB servers being in an Active/Passive Cluster). All servers are running Windows Server 2008 R2. As part of our application, we will have incoming traffic via the MSMQ, FILE and SOAP adapters. We also have a requirement for High-availability and Load-balancing. Let's say I create two different Biztalk Hosts and assign the FILE receive handler to the first one and the MSMQ receive handler to the second one. I now create two host instances for each of the two hosts (i.e. one for each of my two physical servers). After reviewing the Biztalk Documentation, this is what I know so far: For FILE (Receive), high-availablity and load-balancing will be achieved by Biztalk automatically because I set up a host instance on each of the two servers in the group. MSMQ (Receive) requires Biztalk Host Clustering to ensure high-availability (Host Clustering however requires Windows Failover Clustering to be set up as well). No loading-balancing option is clear here. SOAP (Receive) requires NLB to achieve Load-balancing and High-availability (if one server goes down, NLB will direct traffic to the other). This is where I'm completely puzzled and I desperately need your help: Is it possible to have a Windows Failover Cluster and NLB set up at the same time on the two application servers? If yes, then please tell me how. If no, then please explain to me how anyone is acheiving high-availability and load-balancing for MSMQ and SOAP when their underlying prerequisites are mutually exclusive! Your help is greatly appreciated, M

  Read the article

• Copying a directory off a network drive using Objective-C/C

  - by Jeff

  Hi All, I'm trying to figure out a way for this to work: NSString *searchCommand = [[NSString alloc] initWithFormat:@"cp -R /Volumes/Public/DirectoryToCopy* Desktop/"]; const char* system_call = [searchCommand UTF8String]; system(system_call); The system() method does not acknowledge the specific string I am passing in. If I try something like: system("kextstat"); No problems. Any ideas why the find string command I'm passing in is not working? All I get is "GDB: Running ....." in xCode. I should mention that if I try the same exact command in terminal it works just fine.

  Read the article

• Programmaticaly prevent Vista desktop search (WDS) from indexing pst files placed on mapped network

  - by Jao

  Hi! After several days and multiple attempts I didn't find any 100% solution for this trouble. My search and investigation scopes: Direct access to registry: HKLM\SOFTWARE\Microsoft\Windows Search\CrawlScopeManager\Windows\SystemIndex\WorkingSetRules HKCU\Software\Microsoft\Windows Search\Gather\Windows\SystemIndex\Protocols\Mapi HKLM\SOFTWARE\Microsoft\Windows Search\Gather\Windows\SystemIndex\Sites\ and other keys... Windows Search 3.X interfaces like ISearchManager using Microsoft.Search.Interop Microsoft.Office.Interop.Outlook classes: NameSpace, Store AD policies (useless, no effect :( Preferred technologies: VB.NET, C#. This solution must be deployed within a large organization (about 5000 wokstations). Any ideas? Thanks in advance.

  Read the article

• Social network graph using a javascript library

  - by Deepak Konidena

  Hi, I intend to draw a directed graph (node-oriented). The nodes in the graph are dynamically generated. I am wondering if there's any good js library out there that solves my problem. Edges and weights need to be custom configured. Thanks, Deepak.

  Read the article

• haskell network io hgetline

  - by Alex

  I want to read all the data on a handle, and then block waiting for more data. listen1 stops when there is a '\n' character in the stream. listen2 works and could be made completely general by imitating the code for hGetNonBlocking. What is the best way to do this? import qualified Data.ByteString as B loop = sequence_ . repeat listen1 :: Handle -> TChan B.ByteString -> IO() listen1 sock chan = do loop ( do s <- B.hGetLine sock atomically (writeTChan chan s) ) listen2 :: Handle -> TChan B.ByteString -> IO() listen2 sock chan = do loop ( do s <- B.hGet sock 1 s1 <- B.hGetNonBlocking sock 65000 atomically (writeTChan chan (B.append s s1)) )

  Read the article

• Accessing Sharepoint 2007 documents outside network

  - by Ruby

  Hello, I just installed MOSS 2007 and configure it on a machine. The machine is not in a domain. When I try to create a new document in my document library (Server is on a remote location and my laptop is not a part of the domain), MS Word 2007 opens, asks me for login credentials 3 times and then disappears leaving me with a new blank word document. Is there any way to enable remote access of MOSS 2007 documents? Thanks :)

  Read the article

• network programming management-UNIX

  - by catty

  under what conditions a socket is ready for reading and writing?

  Read the article

• Recommendation engine for social network

  - by arvind sharma

  Hi I have a social networking site I want a generic recommendation engine that can work with any feature. Like I can add it for pic, video or application. Pls suggest...........

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >