pretty print - Page 201

Python: Parsing a colon delimited file with various counts of fields

- by Mark

I'm trying to parse a a few files with the following format in 'clientname'.txt hostname:comp1 time: Fri Jan 28 20:00:02 GMT 2011 ip:xxx.xxx.xx.xx fs:good:45 memory:bad:78 swap:good:34 Mail:good Each section is delimited by a : but where lines 0,2,6 have 2 fields... lines 1,3-5 have 3 or more fields. (A big issue I've had trouble with is the time: line, since 20:00:02 is really a time and not 3 separate fields. I have several files like this that I need to parse. There are many more lines in some of these files with multiple fields. ... for i in clients: if os.path.isfile(rpt_path + i + rpt_ext): # if the rpt exists then do this rpt = rpt_path + i + rpt_ext l_count = 0 for line in open(rpt, "r"): s_line = line.rstrip() part = s_line.split(':') print part l_count = l_count + 1 else: # else break break First I'm checking if the file exists first, if it does then open the file and parse it (eventually) As of now I'm just printing the output (print part) to make sure it's parsing right. Honestly, the only trouble I'm having at this point is the time: field. How can I treat that line specifically different than all the others? The time field is ALWAYS the 2nd line in all of my report files.

Read the article

Retrieving the first picture with a HTML parser

- by justin01

Hey guys, (Not a native english speaker) I'm doing a personal project in PHP in which I use the Simple HTML Parser to parse the HTML of a given URL and retrieve the first image in a DIV that have a specific ID or class (maincontent, content, main, wrapper, etc. - it's all in an array) and ignore ads. The goal is to take this image and make a thumbnail with it, pretty much like on Digg and others. I thought everything was working fine until I tried my script with the website Snopes ("http://www.snopes.com/photos/animals/luckycoyote.asp" <- this page more exactly). The source of the first image it gets is: " graphics/luckycoyote1.jpg ". So far, to correct this problem I created a little function that gets the domain name of the given URL and insert it before the IMG's source attribute. So for sites like Snopes.com, it gives me: "http://www.snopes.com/graphics/luckycoyote1.jpg" ... while the real URL for this image is "http://www.snopes.com*/photos/animals/graphics/luckycoyote1.jpg*" (or, more precisely: " http://graphics1.snopes.com/photos/animals/graphics/luckycoyote1.jpg " - note the subdomain here). So my main question is: how can I externally/dynamically retrieve the full URL address of an image ("absolute path") when I am only given the "relative path"? I'm pretty sure this is possible, since when I paste the link in Facebook's "What are you doing?" field for example, it gives me the correct path to the image while on the website, the source of the image is only (example) "image/photo/example.jpg". Thank you for your time.

Read the article

Stored Procedure, 'incorrect syntax error'

- by jacksonSD

Attempting to figure out sp's, and I'm getting this error: "Msg 156, Level 15, State 1, Line 5 Incorrect syntax near the keyword 'Procedure'." the error seems to be on the if, but I can drop other existing tables with stored procedures the exact same way so I'm not clear on why this isn't working. can anyone shed some light? Begin Set nocount on Begin Try Create Procedure uspRecycle as if OBJECT_ID('Recycle') is not null Drop Table Recycle create table Recycle (RecycleID integer constraint PK_integer primary key, RecycleType nchar(10) not null, RecycleDescription nvarchar(100) null) insert into Recycle (RecycleID,RecycleType,RecycleDescription) values ('1','Compost','Product is compostable, instructions included in packaging') insert into Recycle (RecycleID,RecycleType,RecycleDescription) values ('2','Return','Product is returnable to company for 100% reuse') insert into Recycle (RecycleID,RecycleType,RecycleDescription) values ('3','Scrap','Product is returnable and will be reclaimed and reprocessed') insert into Recycle (RecycleID,RecycleType,RecycleDescription) values ('4','None','Product is not recycleable') End Try Begin Catch DECLARE @ErrMsg nvarchar(4000); SELECT @ErrMsg = ERROR_MESSAGE(); Throw 50001, @ErrMsg, 1; End Catch -- checking to see if table exists and is loaded: If (Select count(*) from Recycle) >1 begin Print 'Recycle table created and loaded '; Print getdate() End set nocount off End

Read the article

Write a completely fluid HTML page (using '%' instead of 'px' for EVERY element height/width)

- by barak manos

I am designing my HTML pages to be completely fluid: For every element in the mark-up (HTML), I am using 'style="height:%;width:%"' (instead of 'style="height:*px;width:*px"'). This approach seems to work pretty well, except for when changing the window measurements, in which case, the web page elements change their position and end up "on top of each other". I have come up with a pretty good run-time (java-script) solution to that: var elements = document.getElementsByTagName("*"); for (var i=0; i < elements.length; i++) { if (elements[i].style.height) elements[i].style.height = elements[i].offsetHeight+"px"; if (elements[i].style.width ) elements[i].style.width = elements[i].offsetWidth +"px"; } The only problem remaining is, that if the user opens up the website by entering the URL into a non-maximized window, then the page fits that portion of the window. Then, when maximizing the window, the page remains in its previous measurements. So in essence, I have solved the initial problem (when changing the window measurements), but only when the window is initially in its maximum size. Any ideas on how to tackle this problem? (given that I would like to keep my "% page-design" as is).

Read the article

What is the difference between _tmain() and main() in C++?

- by joshcomley

If I run my C++ application with the following main() method everything is OK: int main(int argc, char *argv[]) { cout << "There are " << argc << " arguments:" << endl; // Loop through each argument and print its number and value for (int i=0; i<argc; i++) cout << i << " " << argv[i] << endl; return 0; } I get what I expect and my arguments are printed out. However, if I use _tmain: int _tmain(int argc, char *argv[]) { cout << "There are " << argc << " arguments:" << endl; // Loop through each argument and print its number and value for (int i=0; i<argc; i++) cout << i << " " << argv[i] << endl; return 0; } It just displays the first character of each argument. What is the difference causing this?

Read the article

Implement two functions with the same name but different, non-covariant return types due to multiple abstract base classes

- by user1508167

If I have two abstract classes defining a pure virtual function with the same name, but different, non-covariant return types, how can I derive from these and define an implementation for both their functions? #include <iostream> class ITestA { public: virtual ~ITestA() {}; virtual float test() =0; }; class ITestB { public: virtual ~ITestB() {}; virtual bool test() =0; }; class C : public ITestA, public ITestB { public: /* Somehow implement ITestA::test and ITestB::test */ }; int main() { ITestA *a = new C(); std::cout << a->test() << std::endl; // should print a float, like "3.14" ITestB *b = dynamic_cast<ITestB *>(a); if (b) { std::cout << b->test() << std::endl; // should print "1" or "0" } delete(a); return 0; } As long as I don't call C::test() directly there's nothing ambiguous, so I think that it should work somehow and I guess I just didn't find the right notation yet. Or is this impossible, if so: Why?

Read the article

seriouosly elusive for loop (racking my brains!)

- by user1693359

I've got a loop issue in Python 2.72 that's really frustrating me. Basically the loop is not iterating fast the first index (j), and I've tried all sorts of ways to fix it with no luck. def learn(dataSet): for i in dataSet.getNext(): recall = raw_input("Enter all members of %s you are able to recall >>> (separated by commas) " % (i.getName())) missed = i.getMembers() missedString = [] for a in missed: missedString.append(a.getName()) Here is the loop I can't get to iterate. The first for loop only goes through the first iteration of 'j' in the split string list, then removes it from 'missedString'. I would like for all members of the split-string 'recall' to be removed from 'missedString'. for j in string.split(recall, ','): if j in missedString: missedString.remove(j) continue for b in missed: if b.getName() not in missedString: missed.remove(b) print 'You missed %d. ' % (len(missed)) if (len(missed)) > 0: print 'Maybe a hint or two will help...' for miss in missed: remind(miss.getSecs(), i.getName(), missed) I really have no clue, help would be appreciated!

Read the article

(Java) Is there a type of object that can handle anything from primitives to arrays?

- by Michael

I'm pretty new to Java, so I'm hoping one of you guys knows how to do this. I'm having the user specify both the type and value of arguments, in any XML-like way, to be passed to methods that are external to my application. Example: javac myAppsName externalJavaClass methodofExternalClass [parameters] Of course, to find the proper method, we have to have the proper parameter types as the method may be overloaded and that's the only way to tell the difference between the different versions. Parameters are currently formatted in this manner: (type)value(/type), e.g. (int)71(/int) (string)This is my string that I'm passing as a parameter!(/string) I parse them, getting the constructor for whatever type is indicated, then execute that constructor by running its method, newInstance(<String value>), loading the new instance into an Object. This works fine and dandy, but as we all know, some methods take arrays, or even multi-dimensional arrays. I could handle the argument formatting like so: (array)(array)(int)0(/int)(int)1(/int)(/array)(array)(int)2(/int)(int)3(/int)(/array)(/array)... or perhaps even better... {{(int)0(/int)(int)1(/int)}{(int)2(/int)(int)3(/int)}}. The question is, how can this be implemented? Do I have to start wrapping everything in an Object[] array so I can handle primitives, etc. as argObj[0], but load an array as I normally would? (Unfortunately, I would have to make it an Object[][] array if I wanted to support two-dimensional arrays. This implementation wouldn't be very pretty.)

Read the article

One controller with multiple models? Am I doing this correctly?

- by user363243

My web app, up until this point, has been fairly straight forward. I have Users, Contacts, Appointments and a few other things to manage. All of these are easy - it's just one model per section so I just did a scaffold for each, then modified the scaffolded code to fit my need. Pretty easy... Unfortunately I am having a problem on this next section because I want the 'Financials' section of my app to be more in depth than the other sections which I simply scaffolded. For example, when the user clicks the 'Contacts' link on the navigation bar, it just shows a list of contacts, pretty straight forward and is in line with the scaffold. However, when the user clicks the 'Financials' link on the navigation bar, I want to show the bank accounts on the left of the page and a few of the transactions on the right. So the financials tab will basically work with data from two models: transactions and bank_accounts. I think I should make the models (transactions & bank_accounts) and then make a controller called Financials, then I can query the models from the Financials controller and display the pages in app/views/financials/ Am I correct in this app layout? I have never worked with more than the basics of scaffolding so I want to ensure I get this right! Thank you!

Read the article

How to identify end of InputStream in java

- by Vardhaman

I am trying to read bytes from server using Socket program, ie I am using InputStream to read the bytes. If I pass the length size I am able to read the bytes, but I am not sure what may be the length. So I am not able initialize the byte array. Also I tried while (in.read() !=-1), I observered it loop works fine when the data is sent , but the next line after the loop is not executable , I feel its still looking for the data in the stream but there is no ata. If I close the Server connection , then my client will execute the next line followed to the loop. I am not sure where I am going wrong? this.in = socket.getInputStream(); int dataInt = this.in.read(); while(dataInt != -1){ System.out.print(","+i+"--"+dataInt); i++; dataInt = this.in.read(); } System.out.print("End Of loop"); I get the output as:- ,1--0,2--62,3--96,4--131,5--142,6--1,7--133,8--2,9--16,10--48,11--56,12--1,13--0,14--14,15--128,16--0,17--0,18--0,19--48,20--0,21--0,22--0,23--0,24--0,25--1,26--0,27--0,28--38,29--114,30--23,31--20,32--70,33--3,34--20,35--1,36--133,37--48,38--51,39--49,40--52,41--49,42--55,43--49,44--52,45--52,46--54,47--55,48--50,49--51,50--52,51--48,52--53,53--56,54--51,55--48,56--48,57--57,58--57,59--57,60--57,61--57,62--57,63--57,64--56 But no output for :- End Of loop Please guide how shall I close the loop? Looking forward for you response. Thanking you all in advance.

Read the article

Pass/Access Object Attributes to/from another Class

- by Namuna

Issue: Unable to access parent object attributes Verification.pm: (Parent class) package Verification; use Verification::Proid; sub Proid { my $self = shift; print Dumper($self); my $result = Verification::Proid->validate($self); return $result; } Dumper result $VAR1 = bless( { 'event_name' => 'validate', 'Verification_Type' => 'Proid', 'Verification_Value' => 'ecmetric', 'xml_request' => bless( do{\(my $o = 148410616)}, 'XML::LibXML::Document' ), 'Verification_Options' => [ { '2' => 'UNIX' } ], 'Verification_ID' => '3' }, 'Verification' ); Proid.pm: (Child class) package Verification::Proid; our @ISA = qw(Verification); sub validate { my $self = shift; print Dumper($self); my $result; foreach my $validation_type ( @$self->{Verification_Options} ) { do stuff... } } Dumper result $VAR1 = 'Verification::Proid'; What am I doing wrong that the child class isn't properly getting all the attributes from the object passed to it? Thank you!

Read the article

Drop down menu going under #main div background in IE 7/8/9

- by Adrift

Here is the link to the domain http://linenwoods.com I am working on. I am going to fit the navigation list items on the header, but when the drop down menu is implemented I'm pretty sure it'll go under the #main div like you see currently. Is there any easy way fix to this? I couldn't find anything related to this from a google search .. was hoping someone could help me out. Below is the relevant CSS .. I tried playing around with z-index with no luck as I was told IE8 renders it strangely. If you have the time please follow the link with IE and leave a response .. I am trying to be as cross-browser compatible as possible and already am at a pretty pathetic start. Any help would be appreciated :) body { background-image:url('Background1.jpg'); background-position: center; height: 100%; margin: 0; padding: 0; opacity: 0.8; filter: alpha(opacity=80); } #main { width : 1010px; height: 1315px; background-color: white; margin-top: 15px; filter: alpha(opacity=80); } header { width: 1010px; height: 230px; background-color: white; margin: 0 auto; margin-top: 15px; filter: alpha(opacity=80); } footer { width: 1010px; height: 230px; background-color: white; margin: 15px 0 15px 0; filter: alpha(opacity=80); }

Read the article

trying to switch beginning of an array with another

- by user1874574

I have a problem where i am trying to swap two arrays so that they switch beginnings. example: array 1 = (1,2,3,4,5,6,7,8) and array 2 = (11,12,13,14,15,16,17,18) i want to end up with the first array being (11,12,13,14,5,6,7,8) and i want the second array to be (1,2,3,4,15,16,17,18) but for some reason i end up with 1=(11,12,13,14,5,6,7,8) and 2=(11,12,13,14,15,16,17,18) my code is provided below, what am i doing wrong? public static void Mutate(Genetic lowest, Genetic secondLowest) { int halfway = (lowest.getPopulation().length)/2; int[] one = lowest.getPopulation(); int[] two = secondLowest.getPopulation(); int[] temp = secondLowest.getPopulation(); int[] temp2 = lowest.getPopulation(); for(int i = 0; i < halfway; i++){ temp[i] = one[i]; } lowest.setPopulation(temp); for(int i = 0; i < lowest.getPopulation().length; i++){ System.out.print(temp[i]); } System.out.println(); for(int i = 0; i < halfway; i++){ temp2[i] = two[i]; } for(int i = 0; i < lowest.getPopulation().length; i++){ System.out.print(temp2[i]); } }

Read the article

Why does this while terminate before receiving a value? (java)

- by David

Here's the relevant code snippet. public static Territory[] assignTerri (Territory[] board, String[] colors) { for (int i = 0; i<board.length; i++) { // so a problem is that Territory.translate is void fix this. System.out.print ("What team controls ") ; Territory.translate (i) ; System.out.println (" ?") ; boolean a = false ; while (a = false) { String s = getIns () ; if ((checkColor (s, colors))) { board[i].team = (returnIndex (s, colors)) ; a =true ; } else System.out.println ("error try again") ; } System.out.print ("How many unites are on ") ; Territory.translate (i) ; System.out.println (" ?") ; int n = getInt () ; board[i].population = n ; } return board ; } As an additional piece of information, checkColor just checks to make sure that its first argument, a string, is a string in one of the indexes of its second argument, an array. It seems to me that when the while the method gets a string from the keyboard and then only if that string checks out is a true and the while allowed to terminate. The output I get though is this: What team controls Alaska ? How many unites are on Alaska ? (there is space at the end to type in an input) This would seem to suggest that the while terminates before an input is ever typed in since the first line of text is within the while while the second line of text comes after it outside of it. Why is this happening?

Read the article

Call to a member function find() on a non-object simpleHTMLDOM PHP

- by wandersolo

I am trying to read a link from one page, print the url, go to that page, and read the link on the next page in the same location, print the url, go to that page (and so on...) All I'm doing is reading the url and passing it as an argument to the get_links() method until there are no more links. This is my code but it throws a Fatal error: Call to a member function find() on a non-object. Anyone know what's wrong? <?php $mainPage = 'https://www.bu.edu/link/bin/uiscgi_studentlink.pl/1346752597?ModuleName=univschr.pl&SearchOptionDesc=Class+Subject&SearchOptionCd=C&KeySem=20133&ViewSem=Fall+2012&Subject=&MtgDay=&MtgTime='; get_links($mainPage); function get_links($url) { $data = new simple_html_dom(); $data = file_get_html($url); $nodes = $data->find("input[type=hidden]"); $fURL=$data->find("/html/body/form"); $firstPart = $fURL[0]->action . '<br>'; foreach ($nodes as $node) { $val = $node->value; $name = $node->name; $name . '<br />'; $val . "<br />"; $str1 = $str1. "&" . $name . "=" . $val; } $fixStr1 = str_replace('&College', '?College', $str1); $fixStr2 = str_replace('Fall 2012', 'Fall+2012', $fixStr1); $fixStr3 = str_replace('Class Subject', 'Class+Subject', $fixStr2); $fixStr4 = $firstPart . $fixStr3; echo $nextPageURL = chop($fixStr4); get_links($nextPageURL); } ?>

Read the article

Python: Determine whether list of lists contains a defined sequence

- by duhaime

I have a list of sublists, and I want to see if any of the integer values from the first sublist plus one are contained in the second sublist. For all such values, I want to see if that value plus one is contained in the third sublist, and so on, proceeding in this fashion across all sublists. If there is a way of proceeding in this fashion from the first sublist to the last sublist, I wish to return True; otherwise I wish to return False. In other words, for each value in sublist one, for each "step" in a "walk" across all sublists read left to right, if that value + n (where n = number of steps taken) is contained in the current sublist, the function should return True; otherwise it should return False. (Sorry for the clumsy phrasing--I'm not sure how to clean up my language without using many more words.) Here's what I wrote. a = [ [1,3],[2,4],[3,5],[6],[7] ] def find_list_traversing_walk(l): for i in l[0]: index_position = 0 first_pass = 1 walking_current_path = 1 while walking_current_path == 1: if first_pass == 1: first_pass = 0 walking_value = i if walking_value+1 in l[index_position + 1]: index_position += 1 walking_value += 1 if index_position+1 == len(l): print "There is a walk across the sublists for initial value ", walking_value - index_position return True else: walking_current_path = 0 return False print find_list_traversing_walk(a) My question is: Have I overlooked something simple here, or will this function return True for all true positives and False for all true negatives? Are there easier ways to accomplish the intended task? I would be grateful for any feedback others can offer!

Read the article

Why does this while terminate before recieving a value? (java)

- by David

here's the relevant code snippet. public static Territory[] assignTerri (Territory[] board, String[] colors) { for (int i = 0; i<board.length; i++) { // so a problem is that Territory.translate is void fix this. System.out.print ("What team controls ") ; Territory.translate (i) ; System.out.println (" ?") ; boolean a = false ; while (a = false) { String s = getIns () ; if ((checkColor (s, colors))) { board[i].team = (returnIndex (s, colors)) ; a =true ; } else System.out.println ("error try again") ; } System.out.print ("How many unites are on ") ; Territory.translate (i) ; System.out.println (" ?") ; int n = getInt () ; board[i].population = n ; } return board ; } as an additional piece of information, checkColor just checks to make sure that its first argument, a string, is a string in one of the indexes of its second argument, an array. it seems to me that when the while the method gets a string from the keyboard and then only if that string checks out is a true and the while allowed to terminate. The output i get though is this: What team controls Alaska ? How many unites are on Alaska ? (there is space at the end to type in an input) This would seem to suggest that the while terminates before an input is ever typed in since the first line of text is within the while while the second line of text comes after it outside of it. why is this happening?

Read the article

Using JSON.NET for dynamic JSON parsing

- by Rick Strahl

With the release of ASP.NET Web API as part of .NET 4.5 and MVC 4.0, JSON.NET has effectively pushed out the .NET native serializers to become the default serializer for Web API. JSON.NET is vastly more flexible than the built in DataContractJsonSerializer or the older JavaScript serializer. The DataContractSerializer in particular has been very problematic in the past because it can't deal with untyped objects for serialization - like values of type object, or anonymous types which are quite common these days. The JavaScript Serializer that came before it actually does support non-typed objects for serialization but it can't do anything with untyped data coming in from JavaScript and it's overall model of extensibility was pretty limited (JavaScript Serializer is what MVC uses for JSON responses). JSON.NET provides a robust JSON serializer that has both high level and low level components, supports binary JSON, JSON contracts, Xml to JSON conversion, LINQ to JSON and many, many more features than either of the built in serializers. ASP.NET Web API now uses JSON.NET as its default serializer and is now pulled in as a NuGet dependency into Web API projects, which is great. Dynamic JSON Parsing One of the features that I think is getting ever more important is the ability to serialize and deserialize arbitrary JSON content dynamically - that is without mapping the JSON captured directly into a .NET type as DataContractSerializer or the JavaScript Serializers do. Sometimes it isn't possible to map types due to the differences in languages (think collections, dictionaries etc), and other times you simply don't have the structures in place or don't want to create them to actually import the data. If this topic sounds familiar - you're right! I wrote about dynamic JSON parsing a few months back before JSON.NET was added to Web API and when Web API and the System.Net HttpClient libraries included the System.Json classes like JsonObject and JsonArray. With the inclusion of JSON.NET in Web API these classes are now obsolete and didn't ship with Web API or the client libraries. I re-linked my original post to this one. In this post I'll discus JToken, JObject and JArray which are the dynamic JSON objects that make it very easy to create and retrieve JSON content on the fly without underlying types. Why Dynamic JSON? So, why Dynamic JSON parsing rather than strongly typed parsing? Since applications are interacting more and more with third party services it becomes ever more important to have easy access to those services with easy JSON parsing. Sometimes it just makes lot of sense to pull just a small amount of data out of large JSON document received from a service, because the third party service isn't directly related to your application's logic most of the time - and it makes little sense to map the entire service structure in your application. For example, recently I worked with the Google Maps Places API to return information about businesses close to me (or rather the app's) location. The Google API returns a ton of information that my application had no interest in - all I needed was few values out of the data. Dynamic JSON parsing makes it possible to map this data, without having to map the entire API to a C# data structure. Instead I could pull out the three or four values I needed from the API and directly store it on my business entities that needed to receive the data - no need to map the entire Maps API structure. Getting JSON.NET The easiest way to use JSON.NET is to grab it via NuGet and add it as a reference to your project. You can add it to your project with: PM> Install-Package Newtonsoft.Json From the Package Manager Console or by using Manage NuGet Packages in your project References. As mentioned if you're using ASP.NET Web API or MVC 4 JSON.NET will be automatically added to your project. Alternately you can also go to the CodePlex site and download the latest version including source code: http://json.codeplex.com/ Creating JSON on the fly with JObject and JArray Let's start with creating some JSON on the fly. It's super easy to create a dynamic object structure with any of the JToken derived JSON.NET objects. The most common JToken derived classes you are likely to use are JObject and JArray. JToken implements IDynamicMetaProvider and so uses the dynamic keyword extensively to make it intuitive to create object structures and turn them into JSON via dynamic object syntax. Here's an example of creating a music album structure with child songs using JObject for the base object and songs and JArray for the actual collection of songs:[TestMethod] public void JObjectOutputTest() { // strong typed instance var jsonObject = new JObject(); // you can explicitly add values here using class interface jsonObject.Add("Entered", DateTime.Now); // or cast to dynamic to dynamically add/read properties dynamic album = jsonObject; album.AlbumName = "Dirty Deeds Done Dirt Cheap"; album.Artist = "AC/DC"; album.YearReleased = 1976; album.Songs = new JArray() as dynamic; dynamic song = new JObject(); song.SongName = "Dirty Deeds Done Dirt Cheap"; song.SongLength = "4:11"; album.Songs.Add(song); song = new JObject(); song.SongName = "Love at First Feel"; song.SongLength = "3:10"; album.Songs.Add(song); Console.WriteLine(album.ToString()); } This produces a complete JSON structure: { "Entered": "2012-08-18T13:26:37.7137482-10:00", "AlbumName": "Dirty Deeds Done Dirt Cheap", "Artist": "AC/DC", "YearReleased": 1976, "Songs": [ { "SongName": "Dirty Deeds Done Dirt Cheap", "SongLength": "4:11" }, { "SongName": "Love at First Feel", "SongLength": "3:10" } ] } Notice that JSON.NET does a nice job formatting the JSON, so it's easy to read and paste into blog posts :-). JSON.NET includes a bunch of configuration options that control how JSON is generated. Typically the defaults are just fine, but you can override with the JsonSettings object for most operations. The important thing about this code is that there's no explicit type used for holding the values to serialize to JSON. Rather the JSON.NET objects are the containers that receive the data as I build up my JSON structure dynamically, simply by adding properties. This means this code can be entirely driven at runtime without compile time restraints of structure for the JSON output. Here I use JObject to create a album 'object' and immediately cast it to dynamic. JObject() is kind of similar in behavior to ExpandoObject in that it allows you to add properties by simply assigning to them. Internally, JObject values are stored in pseudo collections of key value pairs that are exposed as properties through the IDynamicMetaObject interface exposed in JSON.NET's JToken base class. For objects the syntax is very clean - you add simple typed values as properties. For objects and arrays you have to explicitly create new JObject or JArray, cast them to dynamic and then add properties and items to them. Always remember though these values are dynamic - which means no Intellisense and no compiler type checking. It's up to you to ensure that the names and values you create are accessed consistently and without typos in your code. Note that you can also access the JObject instance directly (not as dynamic) and get access to the underlying JObject type. This means you can assign properties by string, which can be useful for fully data driven JSON generation from other structures. Below you can see both styles of access next to each other:// strong type instance var jsonObject = new JObject(); // you can explicitly add values here jsonObject.Add("Entered", DateTime.Now); // expando style instance you can just 'use' properties dynamic album = jsonObject; album.AlbumName = "Dirty Deeds Done Dirt Cheap"; JContainer (the base class for JObject and JArray) is a collection so you can also iterate over the properties at runtime easily:foreach (var item in jsonObject) { Console.WriteLine(item.Key + " " + item.Value.ToString()); } The functionality of the JSON objects are very similar to .NET's ExpandObject and if you used it before, you're already familiar with how the dynamic interfaces to the JSON objects works. Importing JSON with JObject.Parse() and JArray.Parse() The JValue structure supports importing JSON via the Parse() and Load() methods which can read JSON data from a string or various streams respectively. Essentially JValue includes the core JSON parsing to turn a JSON string into a collection of JsonValue objects that can be then referenced using familiar dynamic object syntax. Here's a simple example:public void JValueParsingTest() { var jsonString = @"{""Name"":""Rick"",""Company"":""West Wind"", ""Entered"":""2012-03-16T00:03:33.245-10:00""}"; dynamic json = JValue.Parse(jsonString); // values require casting string name = json.Name; string company = json.Company; DateTime entered = json.Entered; Assert.AreEqual(name, "Rick"); Assert.AreEqual(company, "West Wind"); } The JSON string represents an object with three properties which is parsed into a JObject class and cast to dynamic. Once cast to dynamic I can then go ahead and access the object using familiar object syntax. Note that the actual values - json.Name, json.Company, json.Entered - are actually of type JToken and I have to cast them to their appropriate types first before I can do type comparisons as in the Asserts at the end of the test method. This is required because of the way that dynamic types work which can't determine the type based on the method signature of the Assert.AreEqual(object,object) method. I have to either assign the dynamic value to a variable as I did above, or explicitly cast ( (string) json.Name) in the actual method call. The JSON structure can be much more complex than this simple example. Here's another example of an array of albums serialized to JSON and then parsed through with JsonValue():[TestMethod] public void JsonArrayParsingTest() { var jsonString = @"[ { ""Id"": ""b3ec4e5c"", ""AlbumName"": ""Dirty Deeds Done Dirt Cheap"", ""Artist"": ""AC/DC"", ""YearReleased"": 1976, ""Entered"": ""2012-03-16T00:13:12.2810521-10:00"", ""AlbumImageUrl"": ""http://ecx.images-amazon.com/images/I/61kTaH-uZBL._AA115_.jpg"", ""AmazonUrl"": ""http://www.amazon.com/gp/product/…ASIN=B00008BXJ4"", ""Songs"": [ { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Dirty Deeds Done Dirt Cheap"", ""SongLength"": ""4:11"" }, { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Love at First Feel"", ""SongLength"": ""3:10"" }, { ""AlbumId"": ""b3ec4e5c"", ""SongName"": ""Big Balls"", ""SongLength"": ""2:38"" } ] }, { ""Id"": ""7b919432"", ""AlbumName"": ""End of the Silence"", ""Artist"": ""Henry Rollins Band"", ""YearReleased"": 1992, ""Entered"": ""2012-03-16T00:13:12.2800521-10:00"", ""AlbumImageUrl"": ""http://ecx.images-amazon.com/images/I/51FO3rb1tuL._SL160_AA160_.jpg"", ""AmazonUrl"": ""http://www.amazon.com/End-Silence-Rollins-Band/dp/B0000040OX/ref=sr_1_5?ie=UTF8&qid=1302232195&sr=8-5"", ""Songs"": [ { ""AlbumId"": ""7b919432"", ""SongName"": ""Low Self Opinion"", ""SongLength"": ""5:24"" }, { ""AlbumId"": ""7b919432"", ""SongName"": ""Grip"", ""SongLength"": ""4:51"" } ] } ]"; JArray jsonVal = JArray.Parse(jsonString) as JArray; dynamic albums = jsonVal; foreach (dynamic album in albums) { Console.WriteLine(album.AlbumName + " (" + album.YearReleased.ToString() + ")"); foreach (dynamic song in album.Songs) { Console.WriteLine("\t" + song.SongName); } } Console.WriteLine(albums[0].AlbumName); Console.WriteLine(albums[0].Songs[1].SongName); } JObject and JArray in ASP.NET Web API Of course these types also work in ASP.NET Web API controller methods. If you want you can accept parameters using these object or return them back to the server. The following contrived example receives dynamic JSON input, and then creates a new dynamic JSON object and returns it based on data from the first:[HttpPost] public JObject PostAlbumJObject(JObject jAlbum) { // dynamic input from inbound JSON dynamic album = jAlbum; // create a new JSON object to write out dynamic newAlbum = new JObject(); // Create properties on the new instance // with values from the first newAlbum.AlbumName = album.AlbumName + " New"; newAlbum.NewProperty = "something new"; newAlbum.Songs = new JArray(); foreach (dynamic song in album.Songs) { song.SongName = song.SongName + " New"; newAlbum.Songs.Add(song); } return newAlbum; } The raw POST request to the server looks something like this: POST http://localhost/aspnetwebapi/samples/PostAlbumJObject HTTP/1.1User-Agent: FiddlerContent-type: application/jsonHost: localhostContent-Length: 88 {AlbumName: "Dirty Deeds",Songs:[ { SongName: "Problem Child"},{ SongName: "Squealer"}]} and the output that comes back looks like this: { "AlbumName": "Dirty Deeds New", "NewProperty": "something new", "Songs": [ { "SongName": "Problem Child New" }, { "SongName": "Squealer New" } ]} The original values are echoed back with something extra appended to demonstrate that we're working with a new object. When you receive or return a JObject, JValue, JToken or JArray instance in a Web API method, Web API ignores normal content negotiation and assumes your content is going to be received and returned as JSON, so effectively the parameter and result type explicitly determines the input and output format which is nice. Dynamic to Strong Type Mapping You can also map JObject and JArray instances to a strongly typed object, so you can mix dynamic and static typing in the same piece of code. Using the 2 Album jsonString shown earlier, the code below takes an array of albums and picks out only a single album and casts that album to a static Album instance.[TestMethod] public void JsonParseToStrongTypeTest() { JArray albums = JArray.Parse(jsonString) as JArray; // pick out one album JObject jalbum = albums[0] as JObject; // Copy to a static Album instance Album album = jalbum.ToObject<Album>(); Assert.IsNotNull(album); Assert.AreEqual(album.AlbumName,jalbum.Value<string>("AlbumName")); Assert.IsTrue(album.Songs.Count > 0); } This is pretty damn useful for the scenario I mentioned earlier - you can read a large chunk of JSON and dynamically walk the property hierarchy down to the item you want to access, and then either access the specific item dynamically (as shown earlier) or map a part of the JSON to a strongly typed object. That's very powerful if you think about it - it leaves you in total control to decide what's dynamic and what's static. Strongly typed JSON Parsing With all this talk of dynamic let's not forget that JSON.NET of course also does strongly typed serialization which is drop dead easy. Here's a simple example on how to serialize and deserialize an object with JSON.NET:[TestMethod] public void StronglyTypedSerializationTest() { // Demonstrate deserialization from a raw string var album = new Album() { AlbumName = "Dirty Deeds Done Dirt Cheap", Artist = "AC/DC", Entered = DateTime.Now, YearReleased = 1976, Songs = new List<Song>() { new Song() { SongName = "Dirty Deeds Done Dirt Cheap", SongLength = "4:11" }, new Song() { SongName = "Love at First Feel", SongLength = "3:10" } } }; // serialize to string string json2 = JsonConvert.SerializeObject(album,Formatting.Indented); Console.WriteLine(json2); // make sure we can serialize back var album2 = JsonConvert.DeserializeObject<Album>(json2); Assert.IsNotNull(album2); Assert.IsTrue(album2.AlbumName == "Dirty Deeds Done Dirt Cheap"); Assert.IsTrue(album2.Songs.Count == 2); } JsonConvert is a high level static class that wraps lower level functionality, but you can also use the JsonSerializer class, which allows you to serialize/parse to and from streams. It's a little more work, but gives you a bit more control. The functionality available is easy to discover with Intellisense, and that's good because there's not a lot in the way of documentation that's actually useful. Summary JSON.NET is a pretty complete JSON implementation with lots of different choices for JSON parsing from dynamic parsing to static serialization, to complex querying of JSON objects using LINQ. It's good to see this open source library getting integrated into .NET, and pushing out the old and tired stock .NET parsers so that we finally have a bit more flexibility - and extensibility - in our JSON parsing. Good to go! Resources Sample Test Project http://json.codeplex.com/© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET Web Api AJAX Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

UPDATE FOR BI PUBLISHER ENTERPRISE 10.1.3.4.1 MARCH 2010

- by Tim Dexter

Latest roll up patch for 10.1.3.4.1 is now out in the wild. Yep, there are bug fixes but the guys have implemented some great enhancements. I'll be covering some of them over the coming weeks, from collapsing bookmarks in your PDFs to better MS AD support to 'true' Excel templates, yes you read that correctly! Patch is available from Oracle's support site. Just search for patch 9546699. Here's the contents and readme, apologies for the big list but at least you can search against it for a particular fix. This patch contains backports of following bugs for BI Publisher Enterprise 10.1.3.4.0 and 10.1.3.4.1. 6193342 - REG:SAMPLE DATA FILE FOR PDF FORM MAPPING IS NOT VALIDATED 6261875 - ERRONEOUS PRECISION VALIDATION ON ONLINE ANALYZER 6439437 - NULL POINTER EXCEPTION WHEN PROCESSING TABLE OF CONTENT 6460974 - BACS EFT PAYMENT INSTRUCTION OUTPUT FILE IS EMPTY 6939721 - BIP: REPORT BUSTING DELIVERY KEY VALUES CANNOT CONTAIN SEVERAL SPECIAL CHARACTER 6996069 - USING XML DB FOR BI REPOSITORY FAILS WITH RESOURCENOTFOUNDEXCEPTION 7207434 - TIMEZONE:SHOULD NOT DO TIMEZONE CONVERSION AGAINST CANONICAL DATE YYYY-MM-DD 7371531 - SUPPORT FOR CSV OUTPUT FOR STRUCTURED XML AND NON SQL DATA SOURCES 7596148 - ER: LDAP FOR MS AD TO SEARCH FROM AD ROOT 7646139 - WEBSERVICES ERROR 7829516 - BIP STANDALONE FAILS TO BURST USING XSL-FO TEMPLATES 8219848 - PDF TEMPLATE REPORT NOT PERFORMING PAGE BREAK 8232116 - PARAMETER VALUE IS PASSED AS NULL,IF IT CONTAINS 'AND' WITHIN THE STRING 8250690 - NOT ABLE TO UPLOAD TEMPLATE VIA BIP API 8288459 - ER: QUERY BUILDER OPTION TO NOT INCLUDE TABLENAME. PREFIX IN SQL 8289600 - REPORT TITLE AND DESCRIPTION CAN'T SUPPORT MULTIPLE LANGUAGES 8327080 - CAN NOT CONFIGURE ORACLE EBUSINESS SUITE SECURITY MODEL WITH ORACLE RAC 8332164 - AN XDO PROPERTY TO ENABLE DEBUG LOGGING 8333289 - WEB SERVICE JOBS FAIL AFTER BIP STARTED UP 8340239 - HTTP NOTIFY IS MISSING IN SCHEDULEREPORTREQUEST 8360933 - UNABLE TO USE LOGGED IN BI USER AS THE WSSECURITY USERNAME IN A VARIABLE FORMAT 8400744 - ADMINISTRATOR USER DOES NOT HAVE FULL ADMINISTRATOR RIGHTS 8402436 - CRASH CAUSED BY UNDETERMINED ATTRKEY ERROR IN MULTI-THREADED 8403779 - IMPOSSIBLE TO CONFIGURE PARAMETER FOR A REPORT 8412259 - PDF, RTF OUTPUT NOT HANDLING THE TABLE BORDER AND CONTENT OVERFLOWS TO NEXT PAGE 8483919 - DYNAMIC DATASOURCE WEBSERVICE SHOULD WORK WITH SERVERSIDE CONNECTIONS 8444382 - ID ATTRIBUTE IN TITLE-PAGE DOES NOT WORK WITH SELECTACTION PROPERTY 8446681 - UI LANGUAGE IS NOT REFLECTED AT THE FIRST LOG IN 8449884 - PUBLICREPORTSERVICE FAILS ON EMAIL DELIVERY USING BIP 10.1.3.4.0D+ - NPE 8454858 - DB: XMLP_ADMIN CAN SEE ALL THE FOLDERS BUT ONLY HAS VIEW PERMISSIONS 8458818 - PDFBOOKBINDER FAILS WITH OUTOFMEMORY ERROR WHEN TRYING TO BIND > 1500 PDFS 8463992 - INCORRECT IMPLEMENTATION OF XLIFF SPECIFICATION 8468777 - BI PUBLISHER QUERY BUILDER NOT LOADING SCHEMA OBJECTS 8477310 - QUERY BUILDER NOT WORK WITH SSL ON STANDALONE OC4J 8506701 - POSITIVE PAY FILE WITH OPTIONS NOT CREATING FILE CHECKS OVER 2500 8506761 - PERFORMANCE: PDFBOOKBINDER CLASS TAKES 4 HOURS TO BIND 4000 PAGES 8535604 - NPE WHEN CLICKING "ANALYZER FOR EXCEL" BUTTON IN ALL_* REPORTS 8536246 - REMOVE-PDF-FIELDS DOES NOT WORK WITH CHECKBOXES WITH OPT ARRAY 8541792 - NULLPOINTER EXCEPTION WHILE USING SFTP PROTOCOL 8554443 - LOGGING TIME STAMP IN 10G: THE HOUR PART IS WRONG 8558007 - UNABLE TO LOGIN BIP WITH UNPRIVILEGED USER WHEN XDB IS USED FOR REPORSITORY STOR 8565758 - NEED TO CONNECT IMPERSONATION TO DATA SOURCE WITH PL/SQL FUNCTION 8567235 - EFTPROCESSOR AND XDO DEBUG ENABLED CAUSES ORG.XML.SAX.SAXPARSEEXCEPTION 8572216 - EFTPROCESSOR NOT THREAD SAFE - CAUSING CORRUPTED REPORTS TO BE GENERATED 8575776 - LANDSCAPE REPORT ORIENTAION NOT SELECTED WHEN REPORT IS PRINTED WITH PS 8588330 - XLIFF GENERATING WITH WRONG MAXWIDTH ATTRIBUTE IN SOME TRANS-UNITS 8584446 - EFTGENERATOR DOES NOT USE XSLT SCALABILITY - JAVA.LANG.OUTOFMEMORY EXCEPTION 8594954 - ENG: BIP NOTIFY MESSAGE BECOMES ENGLISH 8599646 - ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 8605110 - PDFSIGNATURE API ENCOUNTERS JAVA.LANG.NULLPOINTEREXCEPTION ON PDF WITH WATERMARK 8660915 - BURSTING WITH DATA TEMPLATE NOT WORKING WITH OPTION: VALUE=FALSE 8660920 - ER: EXTRACT XHTML DATA USING XDODTEXE IN XHTML FORMAT 8667150 - PROBLEM WITH 3RD APPLICATION ABOUT PDF GENERATED WITH BI PUBLISHER 8683547 - "CLICK VIEW REPORT BUTTON TO GENERATE THE REPORT" MESSAGE IS DISPLAYED 8713080 - SEARCH" PARAMETER IS NOT SHOWING NON ENGLISH DATA IN INTERNET EXPLORER 8724778 - EXCEL ANALYZER PARAMETERS DO NOT WORK WITH EXCEL 2007 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 8728807 - DYNAMIC JDBC DATA SOURCE WITH PRE-PROCESS FUNCTION BASED ON EXISTING DATA SOURCE 8759558 - XDO TEMPLATE SHOWS CURRENCY IN WRONG FORMAT FOR DUNNING 8792894 - EFTPROCESSOR DOES NOT SUPPORT XSL TEMPLATE AS INPUTSTREAM 8793550 - BIP GENERATES CSV REPORTS OUTPUT FORMAT WITH EXTENTION .OUT NOT .CSV IN EMAIL 8819869 - PERIOD CLOSE VALUE SUMMARY REPORT (XML) RUNNING INTO WARNING 8825732 - MY FOLDERS LINK BROKEN WITH USER NAME THAT INCLUDES A SLASH (/) OBIEE SECURITY 8831948 - TRYING TO GENERATE A SCATTER PLOT USING THE CHART WIZARD 8842299 - SEEDED QUERY ALWAYS RETURNS RESULTS BASED ON FIRST COLUMN 8858027 - NODE.GETTEXTCONTEXT() NOT AVAILABLE IN 10G UNDER OC4J 8859957 - REPORT TITLE ALIGNMENT GOES BAD FOR REPORTS WITH XLIFF FILE ATTACHED 8860957 - ER: IMPROVE PERFORMANCE OF ANSWERS PARAMETERS 8891537 - GETREPORTPARAMETERS WEB SERVICE API ISSUES WITH OAAM REPORTS 8891558 - GETTING SQLEXCEPTION IN GENERATEREPORT WEB SERVICE API ON OAAM REPORTS 8927796 - ER: DYANAMIC DATA SOURCE SUPPORT BY DATA SOURCE NAME 8969898 - BI PUBLISHER WEB SERVICE GETREPORTPARAMETERS DOES NOT TRANSLATE PARAMETER LABEL 8998967 - MULTIPLE XSL PREDICATES ELEMENT[A='A'] [B='B'] CAUSES XML-22019 ERROR 9012511 - SCALABLE MODE IS NOT WORKING IN XMLPUBLISHER 10.1.3.4 9016976 - ER: PRINT XSL-T AND FOPROCESSING TIMING INFORMATION 9018580 - WEB SERVICE CALL FAILS WHEN REPORT INCLUDES SEARCH TYPE 9018657 - JOB FAILS WHEN LOV QUERY CONTAINS BIND VARIABLES :XDO_USER_UI_LOCALE 9021224 - PERFORMANCE ISSUE TO VIEW DASHBOARD PAGE WITH BIP REPORT LINKS 9022440 - ER: SUPPORT "COMB OF N CHARACTERS" FEATURE PDF FORM TEXT FIELDS 9026236 - XPATH DOES NOT WORK CORRECTLY IN 10.1.3.4.1 9051652 - FILE EXTENSION OF CSV OUTPUT IS TXT WHEN IT IS EXPORTED FROM REPORT VIEWER 9053770 - WHEN SENDING CSV REPORT OUTPUT BY EMAIL SOMETIMES IT IS SENT WITHOUT EXTENSION 9066483 - PDFBOOKBINDER LEAVE SOME TEMPORARY FILES AFTER MERGING TITLE PAGE OR TOC 9102420 - USE RELATIVE PATHS IN HYPERLINKS 9127185 - CHECKBOX NOT WORK ON SUB TEMPLATE 9149679 - BASE URL IS NOT PASSED CORRECTLY 9149691 - PROVIDE A WAY TO DISABLE THE ABILITY TO CREATE SCHEDULED REPORT JOB "PUBLIC" 9167822 - NOTIFICATION URL BREAKS ON FOLDER NAMES WITH SPACES 9167913 - CHARTS ARE MISSING IN PDF OUTPUTS WHEN THE DEFAULT OUTPUT FORMAT IS NOT A PDF 9217965 - REPORT HISTORY TAKES LONG TIME TO RENDER THE PAGE 9236674 - BI PUBLISHER PARAMETERS DO NOT CASCADE REFRESH AFTER SECOND PARAMETER 9283933 - OPTION TO COLLAPSE PDF OUTPUT BOOKMARKS BY DEFAULT 9287245 - SAVE COMPLETED SCHEDULED REPORTS IN ITS REPORT NAME AND NOT IN A GENERIC NAME 9348862 - ADD FEATURE TO DISABLE THE XSLT1.0-COMPATIBILITY IN RTF TEMPLATE 9355897 - ER: NEED A SAFE DIVIDE FUNCTION 9364169 - UIX 2.3.6.6 PATCH UPTAKE FOR 10.1.3.4.1 9365153 - LEADING WHITESPACE CHARACTERS IN A FIELD TRIMMED WHEN RUN VIEW OR EXPORT TO .CSV 9389039 - LONG TEXT IS NOT WRAPPED PROPERLY IN THE AUTOSHAPE ON RTF TEMPLATE 9475697 - ENH: SUB-TEMPLATE:DYNAMIC VARIABLE WITH PARAMETER VALUE IN CALL-TEMPLATE CLAUSE 9484549 - CHANGE DEFAULT FOR "XSLT1.0-COMPATIBILITY" TO FALSE FOR 10G 9508499 - UNABLE TO READ EXCEL FILE IF MORE THAN 1800 ROWS GENERATED 9546078 - EMAIL DELIVERY INFORMATION SHOULD NOT BE SAVED AND AUTO-FED IN JOB SUBMISSION 9546101 - EXCEPTION OCCURS WHEN SFTP/FTP REMOTE FILENAME DOSE NOT CONTAIN A SLASH '/' 9546117 - SFTP REPORT DELIVERY FAILS WITH NO CLASS DEF FOUND EXCEPTION ON WEBLOGIC 9.2 Following bugs are included in 10.1.3.4.1 and they are only applied to 10.1.3.4.0. 4612604 - FROM EDGE ATTRIBUTE OF HEADER AND FOOTER IS NOT PRESERVED 6621006 - PARAMNAMEVALUE ELEMENT DEFINITION SHOULD HAVE PARAMETER TYPE 6811967 - DATE PARAMETER NOT HANDLING DATE OFFSET WHEN PASSED UPPERCASE Z FOR OFFSET 6864451 - WHEN BIP REPORTS TIMEOUT, THE PROCESS TO LOG BACK IN IS NOT USER FRIENDLY 6869887 - FUSION CURRENCY BRD:4.1.4/4.1.6 OVERRIDINDG MASK /W XSLT._XDOCURMASKS /W SYMBOL 6959078 - "TEXT FIELD CONTAINS COMMA-SEPARATED VALUES" DOESN'T WORK IN CASE OF STRING 6994647 - GETTING ERROR MESSAGE SAYING JOB FAILED EVEN THOUGH WORKS OK IN BI PUBLISHER 7133143 - ENABLE USER TO ENTER 'TODAY' AS VALUE TO DATE PARAMETER IN SCHEDULE REPORT UI 7165117 - QA_BIP_FUNC:-CLOSED LIFE TIME REPORT ERROR MESSAGE IN CMD 7167068 - LEADER-LENGTH OR RULE-THICKNESS PROPRTY IS TOO LARGE 7219517 - NEED EXTENSION FUNCTIONS TO URL ENCODE TEXT STRING. 7269228 - TEMPLATEHELPER PRODUCES A GARBLED OUTPUT WHEN INVOKED BY MULTIPLE THREADS 7276813 - GETREPORTPARAMETERSRETURN ELEMENT SHOULD HAVE DEFAULT VALUE 7279046 - SCHDEULER:UNABLE TO DELETE A JOB USING API 7280336 - ER: BI PUBLISHER - SITEMINDER SUPPORT - GENERIC NON-ORACLE SSO SUPPORT 7281468 - MODIFY SQL SERVER PROPERTIES TO USE HYP DATA DIRECT IN JDBCDEFAULTS.XML 7281495 - PLEASE ADD SUPPORTED DBS TO JDBCDEFAULT.XML AND LIST EACH DB VERSION SEPARATELY 7282456 - FUSION CURRENCY BRD 4.1.9.2: CURRENCY AMOUTS SHOULD NOT BE WRAPPED. MINUS SIGN 7282507 - FUSION CURRENCY BRD4.1.2.5:DISPLAY CURRENCY AND LOCALE DERIVED CURRENCY SYMBOL 7284780 - FUSION CURRENCY BRD 4.1.12.4 CORRECTLY ALIGN NEGATIVE CURRENCY AMOUNTS 7306874 - OPP ERROR - JAVA.LANG.OUTOFMEMORYERROR: ZIP002:OUTOFMEMORYERROR, MEM_ERROR 7309596 - SIEBELCRM: BIP ENHANCEMENT REQUEST FOR SIEBEL PARAMETERIZATION 7337173 - UI LOCALE IS ALWAYS REWRITTEN TO EN WHEN MOVE FROM DASHBOARD 7338349 - REG:ANALYZER REPORT WITH AVERAGE FUNCTION FAIL TO RUN FOR NON INTERACTIVE FORMAT 7343757 - OUTPUT FORMAT OF TEMPLATES IS NOT SAVING 7345989 - SET XDK REPLACEILLEGALCHARS AND ENHANCE XSLTWRAPPER WARNING 7354775 - UNEXPECTED BEHAVIOR OF LAYOUT TEMPLATE PARAMETER OF RUNREPORT WEBSERVICES API 7354798 - SEQUENCE ORDER OF PARAMETERS FOR THE RUNREPORT WEBSERVICES API 7358973 - PARALLEL SFTP DELIVERY FAILS DUE TO SSHEXCEPTION: CORRUPT MAC ON INPUT 7370110 - REGN:FAIL WHEN USE JNDI TO XMLDB REPORT REPOSITORY 7375859 - NEW WEBSERVICE REQUIRED FOR RUNREPORT 7375892 - REQUIRE NEW WEBSERVICE TO CHECK IF REPORTFOLDER EXISTS 7377686 - TEXT-ALIGN NOT APPLIED IN PDF IN HEBREW LOCALE 7413722 - RUNREPORT API DOES NOT PASS BACK ANY GENERATED EXCEPTIONS TO SCHEDULEREPORT 7435420 - FUSION CURRENCY: SUPPORT MICROSOFT(JAVA) FORMAT MASK WITH CURRENCY 7441486 - ER: ADD PARAMETER FOR SFTP TO BURSTING QUERY 7458169 - SSO WITH OID LDAP COULD NOT FETCH OID ROLES 7461161 - EMAIL DELIVERY FAILS - DELIVERYEXCEPTION: 0 BYTE AVAILABLE IN THE GIVEN INPU 7580715 - INCORRECT FORMATTING OF DATES IN TIMEZONE GMT+13 7582694 - INVALID MAXWIDTH VALUE CAUSES NLS FAILURES 7583693 - JAVA.LANG.NULLPOINTEREXCEPTION RAISED WHEN GENERATING HRMS BENEFITS PDF REPORT 7587998 - NEWLY CREATED USERS IN OID CANT ACCESS REPORTS UNTILL BI PUBLISHER IS RESTARTED 7588317 - TABLE OF CONTENT ALWAYS IN THE SAME FONT 7590084 - REMOVING THE BIP ENTERPRISE BANNER BUT KEEPING THE REPORTS & SCHEDULES TAB 7590112 - SOMEONE NOT PRIVILEGED ACCESS BIP DIRECTLY SHOULD GET A CUSTOM PAGE 7590125 - AUTOMATING CREATION OF USERS AND ROLES 7597902 - TIMEZONE SUPPORT IN RUNREPORT WEBSERVICE API 7599031 - XML PUBLISHER SUM(CURRENT-GROUP()) FAILS 7609178 - ISSUE WITH TAGS EXTRACTED FROM RTF TEMPLATE 7613024 - HEADER/FOOTER SETTINGS OF RTF TEMPLATE ARE NOT RETAINING IN THE RTF OUTPUT 7623988 - ADD XSLT FUNCTION TO PRINT XDO PROPERTIES 7625975 - RETRIEVING PARAMETER LOV FROM RTF TEMPLATE 7629445 - SPELL OUT A NUMBER INTO WORDS 7641827 - ANALYTICS FROZED AFTER PAGE TAB WHICH INCLUDES [BI PUBLISHER REPORT] WERE CLICKE 7645504 - BIP REPORT FROZED AFTER THE SAME DASHBOARD BIP REPORTS WERE CLICKED SIMULTANEOUS 7649561 - RECEIVE 'TO MANY OPEN FILE HANDLES' ERROR CAUSING BI TO CRASH 7654155 - BIP REMOVES THE FIRST FILE SEPARATOR WHEN RE-ENTER REPOSITORY LOCATION IN ADMIN 7656834 - NEED AN OPTION TO NOT APPEND SCHEMA NAME IN GENERATED QUERY 7660292 - ER: XDOPARSER UPGRADE TO XDK 11G 7687862 - BIP DATA EXTRACTING ENHANCEMENT FOR SIEBEL BIP INTEGRATION 7694875 - ADMINISTRATOR IS SUPER USER WHETHER CONFIGURED MANDATORY_USER_ROLE OR NOT 7697592 - BI PUBLISHER STRINGINDEXOUTOFBOUNDSEXCEPTION WHEN PRINTING LABEL FROM SIM 7702372 - ARABIC/ENGLISH NUMBER/DATE PROBLEM, TOTAL PAGE NUMBER NOT RENDERED IN ENGLISH 7707987 - OUTOFMEMORY BURSTING A BI PUBLISHER REPORT BI SERVER DATA SOURCE 7712026 - ER: CHANGE CHART OUTPUT FORMAT TO PNG IN HTML OUTPUT 7833732 - THE 'SEARCH' PARAMETER TYPE CANNOT BE USED IN IE6 UNDER WINDOWS 8214839 - ER: INCREASE COLUMN SIZE IN SCHEDULER TABLE XMLP_SCHED_JOB 8218271 - ISSUES WHILE CONVERTING EXCEL TO XML 8218452 - BI PUBLISHER STANDALONE : GRAPHICS WITHOUT COLORS IF MORE THAN 33 PAGES 8250980 - USER WITH XMLP_ADMIN RESPONSIBILITY IS NOT ABLE TO EDIT REPORT IN BIP 8262410 - IMPOSSIBLE TO PRINT PDF CREATED BY BI PUBLISHER VIA 3RD PARTY PDF APPLICATION 8274369 - QA: CANNOT DELETE EMAIL SERVER UNDER DELIVERY CONFIGURATION 8284173 - FO:VISIBILITY="HIDDEN" DOESN'T WORK WITH FO:PAGE-NUMBER-CITATION 8288421 - THE VALUE OF VIEW BY GO BACK TO MY HISTORY IN SCHEDULES TAB 8299212 - REG: THE SPECIFICAL BI USER DIDN'T GET THE CORRECT REPORT HISTORY 8301767 - ORA-01795 ERROR OCCURED AFTER ACCESSING DASHBOARD PAGE WHICH INCLUDES BIP 8304944 - ADD SIEBEL SECURITY MODEL IN BI PUBLISHER 10.1.3.4.1 8312814 - QA:HOT:OBI SERVER JDBC DRIVER BIJDBC14.JAR IN XMLPSERVER.WAR IS INCORRECT 8323679 - BI PUBLISHER SENDS HTML REPORT TO OUTLOOK CLIENT AS ATTACHMENT NOT INLINE 8370794 - HISTORY OF COMPLETED SCHEDULER JOBS STILL SHOW ONE AS RUNNING ON CLUSTER ENV 8390970 - OUT OF MEMORY EXCEPTION RAISED, WHILE SAVING THE DATA 8393681 - CHECKBOX IS SHOWING UP AS CHECKED WHEN DATA IS NOT CHECKED VALUE 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 UIX fixes: 6866363 - SUPPORT FOR JAVA DATE FORMAT AS PER JDK 1.4 AND ABOVE 6829124 - DATE PARAMETER NOT HANDLING DATE OFFSET AS PER JAVA STANDARDS ---------------------------- INSTALLATION FOR ENTERPRISE ---------------------------- Upgrade from 10.1.3.4.0d (patch 8284524, 8398280) and 10.1.3.4.1 does not require step 8 and step 9. 1 - Make a backup copy of the xmlp-server-config.xml file located in <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 2 - Back up all the directories under the BI Publisher repository (for example: {Oracle_Home}/xmlp/XMLP). 3 - If you are using Scheduling, back up your existing BI Publisher Scheduler schema. 4 - Shut down BI Publisher. 5 - Undeploy the BI Publisher application ("xmlpserver") from your J2EE application server. See your application server documentation for instructions how to undeploy an application. 6 - Deploy the 10.1.3.4 xmlpserver.ear or xmlpserver.war to your application server. See "Manually Installing BI Publisher to Your J2EE Application Server" secition of BI Publisher Installation Guide for guidelines for your application server type. 7 - Copy the saved backup copy of the xmlp-server-config.xml file from step 1 to the newly created BI Publisher <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 8 - Copy ssodefaults.xml to the following directory. And replace [host]:[port] with your server's information. Default values for other properties can be updated depending on your configuration. <Existing Repository>\XMLP\Admin\Security 9 - Copy database-config.xml to the following directory. <Existing Repository>\XMLP\Admin\Scheduler 10 - Restart xmlpserver application or Application Server ---------------------------------- IBM WEBSPHERE 6.1 DEPLOYMENT NOTE ---------------------------------- When users fail to log on to BI Publisher with "HTTP 500 Internal Server Error" on WebSphere 6.1, you must change Class Loader configuration to avoid the error. (bug7506253 - XMLPSERVER WON'T START AFTER DEPLOYMENT TO WEBSPHERE 6.1) SystemErr.log: java.lang.VerifyError: class loading constraint violated (class: oracle/xml/parser/v2/XMLNode method: xdkSetQxName(Loracle/xml/util/QxName;)V) at pc: 0 .... Class Loader Configuration Steps: 1 - Login to WebSphere Admin console. Click Enterprise Applications under Applications menu 2 - Click xmlpserver application name from the list 3 - Select "Class loading and update detection" 4 - Update class loader configuration as follows in Class Loader -> General Properties * Polling interval for updated files: [0] Seconds * Class loader order: [x] Classes loaded with application class loader first * WAR class loader policy: [x] Single class loader for application 5 - Apply this change and save the new configuration. 6 - Restart xmlpserver application Please refer to WebSphere 6.1 documentation for more details. "http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html"> http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html ------------------------------------------------------- Oracle WebLogic Server 11g R1 (10.3.1) Deployment NOTE ------------------------------------------------------- If you are deploying BI Publisher to WebLogic Server 10.3.1, you must add the following setting at startup for the domain that contains the BI Publisher server in the /weblogic_home/user_projects/domains/base_domain/bin/startWebLogic.sh script : -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform This setting is required to enable BI Publisher to find the TopLink JAR files to create the Scheduler tables.

Read the article

Guide to reduce TFS database growth using the Test Attachment Cleaner

- by terje

Recently there has been several reports on TFS databases growing too fast and growing too big. Notable this has been observed when one has started to use more features of the Testing system. Also, the TFS 2010 handles test results differently from TFS 2008, and this leads to more data stored in the TFS databases. As a consequence of this there has been released some tools to remove unneeded data in the database, and also some fixes to correct for bugs which has been found and corrected during this process. Further some preventive practices and maintenance rules should be adopted. A lot of people have blogged about this, among these are: Anu’s very important blog post here describes both the problem and solutions to handle it. She describes both the Test Attachment Cleaner tool, and also some QFE/CU releases to fix some underlying bugs which prevented the tool from being fully effective. Brian Harry’s blog post here describes the problem too This forum thread describes the problem with some solution hints. Ravi Shanker’s blog post here describes best practices on solving this (TBP) Grant Holidays blogpost here describes strategies to use the Test Attachment Cleaner both to detect space problems and how to rectify them. The problem can be divided into the following areas: Publishing of test results from builds Publishing of manual test results and their attachments in particular Publishing of deployment binaries for use during a test run Bugs in SQL server preventing total cleanup of data (All the published data above is published into the TFS database as attachments.) The test results will include all data being collected during the run. Some of this data can grow rather large, like IntelliTrace logs and video recordings. Also the pushing of binaries which happen for automated test runs, including tests run during a build using code coverage which will include all the files in the deployment folder, contributes a lot to the size of the attached data. In order to handle this systematically, I have set up a 3-stage process: Find out if you have a database space issue Set up your TFS server to minimize potential database issues If you have the “problem”, clean up the database and otherwise keep it clean Analyze the data Are your database( s) growing ? Are unused test results growing out of proportion ? To find out about this you need to query your TFS database for some of the information, and use the Test Attachment Cleaner (TAC) to obtain some more detailed information. If you don’t have too many databases you can use the SQL Server reports from within the Management Studio to analyze the database and table sizes. Or, you can use a set of queries . I find queries often faster to use because I can tweak them the way I want them. But be aware that these queries are non-documented and non-supported and may change when the product team wants to change them. If you have multiple Project Collections, find out which might have problems: (Disclaimer: The queries below work on TFS 2010. They will not work on Dev-11, since the table structure have been changed. I will try to update them for Dev-11 when it is released.) Open a SQL Management Studio session onto the SQL Server where you have your TFS Databases. Use the query below to find the Project Collection databases and their sizes, in descending size order. use master select DB_NAME(database_id) AS DBName, (size/128) SizeInMB FROM sys.master_files where type=0 and substring(db_name(database_id),1,4)='Tfs_' and DB_NAME(database_id)<>'Tfs_Configuration' order by size desc Doing this on one of our SQL servers gives the following results: It is pretty easy to see on which collection to start the work Find out which tables are possibly too large Keep a special watch out for the Tfs_Attachment table. Use the script at the bottom of Grant’s blog to find the table sizes in descending size order. In our case we got this result: From Grant’s blog we learnt that the tbl_Content is in the Version Control category, so the major only big issue we have here is the tbl_AttachmentContent. Find out which team projects have possibly too large attachments In order to use the TAC to find and eventually delete attachment data we need to find out which team projects have these attachments. The team project is a required parameter to the TAC. Use the following query to find this, replace the collection database name with whatever applies in your case: use Tfs_DefaultCollection select p.projectname, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by p.projectname order by sum(a.compressedlength) desc In our case we got this result (had to remove some names), out of more than 100 team projects accumulated over quite some years: As can be seen here it is pretty obvious the “Byggtjeneste – Projects” are the main team project to take care of, with the ones on lines 2-4 as the next ones. Check which attachment types takes up the most space It can be nice to know which attachment types takes up the space, so run the following query: use Tfs_DefaultCollection select a.attachmenttype, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by a.attachmenttype order by sum(a.compressedlength) desc We then got this result: From this it is pretty obvious that the problem here is the binary files, as also mentioned in Anu’s blog. Check which file types, by their extension, takes up the most space Run the following query use Tfs_DefaultCollection select SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999)as Extension, sum(compressedlength)/1024 as SizeInKB from tbl_Attachment group by SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999) order by sum(compressedlength) desc This gives a result like this: Now you should have collected enough information to tell you what to do – if you got to do something, and some of the information you need in order to set up your TAC settings file, both for a cleanup and for scheduled maintenance later. Get your TFS server and environment properly set up Even if you have got the problem or if have yet not got the problem, you should ensure the TFS server is set up so that the risk of getting into this problem is minimized. To ensure this you should install the following set of updates and components. The assumption is that your TFS Server is at SP1 level. Install the QFE for KB2608743 – which also contains detailed instructions on its use, download from here. The QFE changes the default settings to not upload deployed binaries, which are used in automated test runs. Binaries will still be uploaded if: Code coverage is enabled in the test settings. You change the UploadDeploymentItem to true in the testsettings file. Be aware that this might be reset back to false by another user which haven't installed this QFE. The hotfix should be installed to The build servers (the build agents) The machine hosting the Test Controller Local development computers (Visual Studio) Local test computers (MTM) It is not required to install it to the TFS Server, test agents or the build controller – it has no effect on these programs. If you use the SQL Server 2008 R2 you should also install the CU 10 (or later). This CU fixes a potential problem of hanging “ghost” files. This seems to happen only in certain trigger situations, but to ensure it doesn’t bite you, it is better to make sure this CU is installed. There is no such CU for SQL Server 2008 pre-R2 Work around: If you suspect hanging ghost files, they can be – with some mental effort, deduced from the ghost counters using the following SQL query: use master SELECT DB_NAME(database_id) as 'database',OBJECT_NAME(object_id) as 'objectname', index_type_desc,ghost_record_count,version_ghost_record_count,record_count,avg_record_size_in_bytes FROM sys.dm_db_index_physical_stats (DB_ID(N'<DatabaseName>'), OBJECT_ID(N'<TableName>'), NULL, NULL , 'DETAILED') The problem is a stalled ghost cleanup process. Restarting the SQL server after having stopped all components that depends on it, like the TFS Server and SPS services – that is all applications that connect to the SQL server. Then restart the SQL server, and finally start up all dependent processes again. (I would guess a complete server reboot would do the trick too.) After this the ghost cleanup process will run properly again. The fix will come in the next CU cycle for SQL Server R2 SP1. The R2 pre-SP1 and R2 SP1 have separate maintenance cycles, and are maintained individually. Each have its own set of CU’s. When it comes I will add the link here to that CU. The "hanging ghost file” issue came up after one have run the TAC, and deleted enourmes amount of data. The SQL Server can get into this hanging state (without the QFE) in certain cases due to this. And of course, install and set up the Test Attachment Cleaner command line power tool. This should be done following some guidelines from Ravi Shanker: “When you run TAC, ensure that you are deleting small chunks of data at regular intervals (say run TAC every night at 3AM to delete data that is between age 730 to 731 days) – this will ensure that small amounts of data are being deleted and SQL ghosted record cleanup can catch up with the number of deletes performed. “ This rule minimizes the risk of the ghosted hang problem to occur, and further makes it easier for the SQL server ghosting process to work smoothly. “Run DBCC SHRINKDB post the ghosted records are cleaned up to physically reclaim the space on the file system” This is the last step in a 3 step process of removing SQL server data. First they are logically deleted. Then they are cleaned out by the ghosting process, and finally removed using the shrinkdb command. Cleaning out the attachments The TAC is run from the command line using a set of parameters and controlled by a settingsfile. The parameters point out a server uri including the team project collection and also point at a specific team project. So in order to run this for multiple team projects regularly one has to set up a script to run the TAC multiple times, once for each team project. When you install the TAC there is a very useful readme file in the same directory. When the deployment binaries are published to the TFS server, ALL items are published up from the deployment folder. That often means much more files than you would assume are necessary. This is a brute force technique. It works, but you need to take care when cleaning up. Grant has shown how their settings file looks in his blog post, removing all attachments older than 180 days , as long as there are no active workitems connected to them. This setting can be useful to clean out all items, both in a clean-up once operation, and in a general There are two scenarios we need to consider: Cleaning up an existing overgrown database Maintaining a server to avoid an overgrown database using scheduled TAC 1. Cleaning up a database which has grown too big due to these attachments. This job is a “Once” job. We do this once and then move on to make sure it won’t happen again, by taking the actions in 2) below. In this scenario you should only consider the large files. Your goal should be to simply reduce the size, and don’t bother about the smaller stuff. That can be left a scheduled TAC cleanup ( 2 below). Here you can use a very general settings file, and just remove the large attachments, or you can choose to remove any old items. Grant’s settings file is an example of the last one. A settings file to remove only large attachments could look like this:  <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> </Attachment> </DeletionCriteria> Or like this: If you want only to remove dll’s and pdb’s about that size, add an Extensions-section. Without that section, all extensions will be deleted.  <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="dll" /> <Include value="pdb" /> </Extensions> </Attachment> </DeletionCriteria> Before you start up your scheduled maintenance, you should clear out all older items. 2. Scheduled maintenance using the TAC If you run a schedule every night, and remove old items, and also remove them in small batches. It is important to run this often, like every night, in order to keep the number of deleted items low. That way the SQL ghost process works better. One approach could be to delete all items older than some number of days, let’s say 180 days. This could be combined with restricting it to keep attachments with active or resolved bugs. Doing this every night ensures that only small amounts of data is deleted.  <DeletionCriteria> <TestRun> <AgeInDays OlderThan="180" /> </TestRun> <Attachment /> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved"/> </LinkedBugs> </DeletionCriteria> In my experience there are projects which are left with active or resolved workitems, akthough no further work is done. It can be wise to have a cleanup process with no restrictions on linked bugs at all. Note that you then have to remove the whole LinkedBugs section. A approach which could work better here is to do a two step approach, use the schedule above to with no LinkedBugs as a sweeper cleaning task taking away all data older than you could care about. Then have another scheduled TAC task to take out more specifically attachments that you are not likely to use. This task could be much more specific, and based on your analysis clean out what you know is troublesome data.  <DeletionCriteria> <TestRun > <AgeInDays OlderThan="30" /> </TestRun> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="iTrace"/> <Include value="dll"/> <Include value="pdb"/> <Include value="wmv"/> </Extensions> </Attachment> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved" /> </LinkedBugs> </DeletionCriteria> The readme document for the TAC says that it recognizes “internal” extensions, but it does recognize any extension. To run the tool do the following command: tcmpt attachmentcleanup /collection:your_tfs_collection_url /teamproject:your_team_project /settingsfile:path_to_settingsfile /outputfile:%temp%/teamproject.tcmpt.log /mode:delete Shrinking the database You could run a shrink database command after the TAC has run in cases where there are a lot of data being deleted. In this case you SHOULD do it, to free up all that space. But, after the shrink operation you should do a rebuild indexes, since the shrink operation will leave the database in a very fragmented state, which will reduce performance. Note that you need to rebuild indexes, reorganizing is not enough. For smaller amounts of data you should NOT shrink the database, since the data will be reused by the SQL server when it need to add more records. In fact, it is regarded as a bad practice to shrink the database regularly. So on a daily maintenance schedule you should NOT shrink the database. To shrink the database you do a DBCC SHRINKDATABASE command, and then follow up with a DBCC INDEXDEFRAG afterwards. I find the easiest way to do this is to create a SQL Maintenance plan including the Shrink Database Task and the Rebuild Index Task and just execute it when you need to do this.

Read the article

Creating a dynamic proxy generator – Part 1 – Creating the Assembly builder, Module builder and cach

- by SeanMcAlinden

I’ve recently started a project with a few mates to learn the ins and outs of Dependency Injection, AOP and a number of other pretty crucial patterns of development as we’ve all been using these patterns for a while but have relied totally on third part solutions to do the magic. We thought it would be interesting to really get into the details by rolling our own IoC container and hopefully learn a lot on the way, and you never know, we might even create an excellent framework. The open source project is called Rapid IoC and is hosted at http://rapidioc.codeplex.com/ One of the most interesting tasks for me is creating the dynamic proxy generator for enabling Aspect Orientated Programming (AOP). In this series of articles, I’m going to track each step I take for creating the dynamic proxy generator and I’ll try my best to explain what everything means - mainly as I’ll be using Reflection.Emit to emit a fair amount of intermediate language code (IL) to create the proxy types at runtime which can be a little taxing to read. It’s worth noting that building the proxy is without a doubt going to be slightly painful so I imagine there will be plenty of areas I’ll need to change along the way. Anyway lets get started… Part 1 - Creating the Assembly builder, Module builder and caching mechanism Part 1 is going to be a really nice simple start, I’m just going to start by creating the assembly, module and type caches. The reason we need to create caches for the assembly, module and types is simply to save the overhead of recreating proxy types that have already been generated, this will be one of the important steps to ensure that the framework is fast… kind of important as we’re calling the IoC container ‘Rapid’ – will be a little bit embarrassing if we manage to create the slowest framework. The Assembly builder The assembly builder is what is used to create an assembly at runtime, we’re going to have two overloads, one will be for the actual use of the proxy generator, the other will be mainly for testing purposes as it will also save the assembly so we can use Reflector to examine the code that has been created. Here’s the code: DynamicAssemblyBuilder using System; using System.Reflection; using System.Reflection.Emit; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Class for creating an assembly builder. /// </summary> internal static class DynamicAssemblyBuilder { #region Create /// <summary> /// Creates an assembly builder. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> public static AssemblyBuilder Create(string assemblyName) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.Run); DynamicAssemblyCache.Add(assembly); return assembly; } /// <summary> /// Creates an assembly builder and saves the assembly to the passed in location. /// </summary> /// <param name="assemblyName">Name of the assembly.</param> /// <param name="filePath">The file path.</param> public static AssemblyBuilder Create(string assemblyName, string filePath) { AssemblyName name = new AssemblyName(assemblyName); AssemblyBuilder assembly = AppDomain.CurrentDomain.DefineDynamicAssembly( name, AssemblyBuilderAccess.RunAndSave, filePath); DynamicAssemblyCache.Add(assembly); return assembly; } #endregion } } So hopefully the above class is fairly explanatory, an AssemblyName is created using the passed in string for the actual name of the assembly. An AssemblyBuilder is then constructed with the current AppDomain and depending on the overload used, it is either just run in the current context or it is set up ready for saving. It is then added to the cache. DynamicAssemblyCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Assembly { /// <summary> /// Cache for storing the dynamic assembly builder. /// </summary> internal static class DynamicAssemblyCache { #region Declarations private static object syncRoot = new object(); internal static AssemblyBuilder Cache = null; #endregion #region Adds a dynamic assembly to the cache. /// <summary> /// Adds a dynamic assembly builder to the cache. /// </summary> /// <param name="assemblyBuilder">The assembly builder.</param> public static void Add(AssemblyBuilder assemblyBuilder) { lock (syncRoot) { Cache = assemblyBuilder; } } #endregion #region Gets the cached assembly /// <summary> /// Gets the cached assembly builder. /// </summary> /// <returns></returns> public static AssemblyBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoAssemblyInCache); } } #endregion } } The cache is simply a static property that will store the AssemblyBuilder (I know it’s a little weird that I’ve made it public, this is for testing purposes, I know that’s a bad excuse but hey…) There are two methods for using the cache – Add and Get, these just provide thread safe access to the cache. The Module Builder The module builder is required as the create proxy classes will need to live inside a module within the assembly. Here’s the code: DynamicModuleBuilder using System.Reflection.Emit; using Rapid.DynamicProxy.Assembly; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for creating a module builder. /// </summary> internal static class DynamicModuleBuilder { /// <summary> /// Creates a module builder using the cached assembly. /// </summary> public static ModuleBuilder Create() { string assemblyName = DynamicAssemblyCache.Get.GetName().Name; ModuleBuilder moduleBuilder = DynamicAssemblyCache.Get.DefineDynamicModule (assemblyName, string.Format("{0}.dll", assemblyName)); DynamicModuleCache.Add(moduleBuilder); return moduleBuilder; } } } As you can see, the module builder is created on the assembly that lives in the DynamicAssemblyCache, the module is given the assembly name and also a string representing the filename if the assembly is to be saved. It is then added to the DynamicModuleCache. DynamicModuleCache using System.Reflection.Emit; using Rapid.DynamicProxy.Exceptions; using Rapid.DynamicProxy.Resources.Exceptions; namespace Rapid.DynamicProxy.Module { /// <summary> /// Class for storing the module builder. /// </summary> internal static class DynamicModuleCache { #region Declarations private static object syncRoot = new object(); internal static ModuleBuilder Cache = null; #endregion #region Add /// <summary> /// Adds a dynamic module builder to the cache. /// </summary> /// <param name="moduleBuilder">The module builder.</param> public static void Add(ModuleBuilder moduleBuilder) { lock (syncRoot) { Cache = moduleBuilder; } } #endregion #region Get /// <summary> /// Gets the cached module builder. /// </summary> /// <returns></returns> public static ModuleBuilder Get { get { lock (syncRoot) { if (Cache != null) { return Cache; } } throw new RapidDynamicProxyAssertionException(AssertionResources.NoModuleInCache); } } #endregion } } The DynamicModuleCache is very similar to the assembly cache, it is simply a statically stored module with thread safe Add and Get methods. The DynamicTypeCache To end off this post, I’m going to create the cache for storing the generated proxy classes. I’ve spent a fair amount of time thinking about the type of collection I should use to store the types and have finally decided that for the time being I’m going to use a generic dictionary. This may change when I can actually performance test the proxy generator but the time being I think it makes good sense in theory, mainly as it pretty much maintains it’s performance with varying numbers of items – almost constant (0)1. Plus I won’t ever need to loop through the items which is not the dictionaries strong point. Here’s the code as it currently stands: DynamicTypeCache using System; using System.Collections.Generic; using System.Security.Cryptography; using System.Text; namespace Rapid.DynamicProxy.Types { /// <summary> /// Cache for storing proxy types. /// </summary> internal static class DynamicTypeCache { #region Declarations static object syncRoot = new object(); public static Dictionary<string, Type> Cache = new Dictionary<string, Type>(); #endregion /// <summary> /// Adds a proxy to the type cache. /// </summary> /// <param name="type">The type.</param> /// <param name="proxy">The proxy.</param> public static void AddProxyForType(Type type, Type proxy) { lock (syncRoot) { Cache.Add(GetHashCode(type.AssemblyQualifiedName), proxy); } } /// <summary> /// Tries the type of the get proxy for. /// </summary> /// <param name="type">The type.</param> /// <returns></returns> public static Type TryGetProxyForType(Type type) { lock (syncRoot) { Type proxyType; Cache.TryGetValue(GetHashCode(type.AssemblyQualifiedName), out proxyType); return proxyType; } } #region Private Methods private static string GetHashCode(string fullName) { SHA1CryptoServiceProvider provider = new SHA1CryptoServiceProvider(); Byte[] buffer = Encoding.UTF8.GetBytes(fullName); Byte[] hash = provider.ComputeHash(buffer, 0, buffer.Length); return Convert.ToBase64String(hash); } #endregion } } As you can see, there are two public methods, one for adding to the cache and one for getting from the cache. Hopefully they should be clear enough, the Get is a TryGet as I do not want the dictionary to throw an exception if a proxy doesn’t exist within the cache. Other than that I’ve decided to create a key using the SHA1CryptoServiceProvider, this may change but my initial though is the SHA1 algorithm is pretty fast to put together using the provider and it is also very unlikely to have any hashing collisions. (there are some maths behind how unlikely this is – here’s the wiki if you’re interested http://en.wikipedia.org/wiki/SHA_hash_functions) Anyway, that’s the end of part 1 – although I haven’t started any of the fun stuff (by fun I mean hairpulling, teeth grating Relfection.Emit style fun), I’ve got the basis of the DynamicProxy in place so all we have to worry about now is creating the types, interceptor classes, method invocation information classes and finally a really nice fluent interface that will abstract all of the hard-core craziness away and leave us with a lightning fast, easy to use AOP framework. Hope you find the series interesting. All of the source code can be viewed and/or downloaded at our codeplex site - http://rapidioc.codeplex.com/ Kind Regards, Sean.

Read the article

Setting up and using Bing Translate API Service for Machine Translation

- by Rick Strahl

Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization ASP.NET .NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Solaris 11.1: Changes to included FOSS packages

- by alanc

Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

Read the article

Ops Center 12c - Provisioning Solaris Using a Card-Based NIC

- by scottdickson

It's been a long time since last I added something here, but having some conversations this last week, I got inspired to update things. I've been spending a lot of time with Ops Center for managing and installing systems these days. So, I suspect a number of my upcoming posts will be in that area. Today, I want to look at how to provision Solaris using Ops Center when your network is not connected to one of the built-in NICs. We'll talk about how this can work for both Solaris 10 and Solaris 11, since they are pretty similar. In both cases, WANboot is a key piece of the story. Here's what I want to do: I have a Sun Fire T2000 server with a Quad-GbE nxge card installed. The only network is connected to port 2 on that card rather than the built-in network interfaces. I want to install Solaris on it across the network, either Solaris 10 or Solaris 11. I have met with a lot of customers lately who have a similar architecture. Usually, they have T4-4 servers with the network connected via 10GbE connections. Add to this mix the fact that I use Ops Center to manage the systems in my lab, so I really would like to add this to Ops Center. If possible, I would like this to be completely hands free. I can't quite do that yet. Close, but not quite. WANBoot or Old-Style NetBoot? When a system is installed from the network, it needs some help getting the process rolling. It has to figure out what its network configuration (IP address, gateway, etc.) ought to be. It needs to figure out what server is going to help it boot and install, and it needs the instructions for the installation. There are two different ways to bootstrap an installation of Solaris on SPARC across the network. The old way uses a broadcast of RARP or more recently DHCP to obtain the IP configuration and the rest of the information needed. The second is to explicitly configure this information in the OBP and use WANBoot for installation WANBoot has a number of benefits over broadcast-based installation: it is not restricted to a single subnet; it does not require special DHCP configuration or DHCP helpers; it uses standard HTTP and HTTPS protocols which traverse firewalls much more easily than NFS-based package installation. But, WANBoot is not available on really old hardware and WANBoot requires the use o Flash Archives in Solaris 10. Still, for many people, this is a great approach. As it turns out, WANBoot is necessary if you plan to install using a NIC on a card rather than a built-in NIC. Identifying Which Network Interface to Use One of the trickiest aspects to this process, and the one that actually requires manual intervention to set up, is identifying how the OBP and Solaris refer to the NIC that we want to use to boot. The OBP already has device aliases configured for the built-in NICs called net, net0, net1, net2, net3. The device alias net typically points to net0 so that when you issue the command "boot net -v install", it uses net0 for the boot. Our task is to figure out the network instance for the NIC we want to use. We will need to get to the OBP console of the system we want to install in order to figure out what the network should be called. I will presume you know how to get to the ok prompt. Once there, we have to see what networks the OBP sees and identify which one is associated with our NIC using the OBP command show-nets. SunOS Release 5.11 Version 11.0 64-bit Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. {4} ok banner Sun Fire T200, No Keyboard Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548. Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c. {4} ok show-nets a) /pci@7c0/pci@0/pci@2/network@0,1 b) /pci@7c0/pci@0/pci@2/network@0 c) /pci@780/pci@0/pci@8/network@0,3 d) /pci@780/pci@0/pci@8/network@0,2 e) /pci@780/pci@0/pci@8/network@0,1 f) /pci@780/pci@0/pci@8/network@0 g) /pci@780/pci@0/pci@1/network@0,1 h) /pci@780/pci@0/pci@1/network@0 q) NO SELECTION Enter Selection, q to quit: d /pci@780/pci@0/pci@8/network@0,2 has been selected. Type ^Y ( Control-Y ) to insert it in the command line. e.g. ok nvalias mydev ^Y for creating devalias mydev for /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias ... net3 /pci@7c0/pci@0/pci@2/network@0,1 net2 /pci@7c0/pci@0/pci@2/network@0 net1 /pci@780/pci@0/pci@1/network@0,1 net0 /pci@780/pci@0/pci@1/network@0 net /pci@780/pci@0/pci@1/network@0 ... name aliases By looking at the devalias and the show-nets output, we can see that our Quad-GbE card must be the device nodes starting with /pci@780/pci@0/pci@8/network@0. The cable for our network is plugged into the 3rd slot, so the device address for our network must be /pci@780/pci@0/pci@8/network@0,2. With that, we can create a device alias for our network interface. Naming the device alias may take a little bit of trial and error, especially in Solaris 11 where the device alias seems to matter more with the new virtualized network stack. So far in my testing, since this is the "next" network interface to be used, I have found success in naming it net4, even though it's a NIC in the middle of a card that might, by rights, be called net6 (assuming the 0th interface on the card is the next interface identified by Solaris and this is the 3rd interface on the card). So, we will call it net4. We need to assign a device alias to it: {4} ok nvalias net4 /pci@780/pci@0/pci@8/network@0,2 {4} ok devalias net4 /pci@780/pci@0/pci@8/network@0,2 ... We also may need to have the MAC for this particular interface, so let's get it, too. To do this, we go to the device and interrogate its properties. {4} ok cd /pci@780/pci@0/pci@8/network@0,2 {4} ok .properties assigned-addresses 82060210 00000000 03000000 00000000 01000000 82060218 00000000 00320000 00000000 00008000 82060220 00000000 00328000 00000000 00008000 82060230 00000000 00600000 00000000 00100000 local-mac-address 00 21 28 20 42 92 phy-type mif ... From this, we can see that the MAC for this interface is 00:21:28:20:42:92. We will need this later. This is all we need to do at the OBP. Now, we can configure Ops Center to use this interface. Network Boot in Solaris 10 Solaris 10 turns out to be a little simpler than Solaris 11 for this sort of a network boot. Since WANBoot in Solaris 10 fetches a specified In order to install the system using Ops Center, it is necessary to create a OS Provisioning profile and its corresponding plan. I am going to presume that you already know how to do this within Ops Center 12c and I will just cover the differences between a regular profile and a profile that can use an alternate interface. Create a OS Provisioning profile for Solaris 10 as usual. However, when you specify the network resources for the primary network, click on the name of the NIC, probably GB_0, and rename it to GB_N/netN, where N is the instance number you used previously in creating the device alias. This is where the trial and error may come into play. You may need to try a few instance numbers before you, the OBP, and Solaris all agree on the instance number. Mark this as the boot network. For Solaris 10, you ought to be able to then apply the OS Provisioning profile to the server and it should install using that interface. And if you put your cards in the same slots and plug the networks into the same NICs, this profile is reusable across multiple servers. Why This Works If you watch the console as Solaris boots during the OSP process, Ops Center is going to look for the device alias netN. Since WANBoot requires a device alias called just net, Ops Center uses the value of your netN device alias and assigns that device to the net alias. That means that boot net will automatically use this device. Very cool! Here's a trace from the console as Ops Center provisions a server: Sun Sun Fire T200, No KeyboardCopyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.OpenBoot 4.30.4.b, 32640 MB memory available, Serial #69057548.Ethernet address 0:14:4f:1d:bc:c, Host ID: 841dbc0c.auto-boot? = false{0} ok {0} ok printenv network-boot-argumentsnetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4 /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cginetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=0100144F1DBC0C,file=http://10.140.204.22:8004/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2 File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2 See what happened? Ops Center looked for the network device alias called net4 that we specified in the profile, took the value from it, and made it the net device alias for the boot. Pretty cool! WANBoot and Solaris 11 Solaris 11 requires an additional step since the Automated Installer in Solaris 11 uses the MAC address of the network to figure out which manifest to use for system installation. In order to make sure this is available, we have to take an extra step to associate the MAC of the NIC on the card with the host. So, in addition to creating the device alias like we did above, we also have to declare to Ops Center that the host has this new MAC. Declaring the NIC Start out by discovering the hardware as usual. Once you have discovered it, take a look under the Connectivity tab to see what networks it has discovered. In the case of this system, it shows the 4 built-in networks, but not the networks on the additional cards. These are not directly visible to the system controller. In order to add the additional network interface to the hardware asset, it is necessary to Declare it. We will declare that we have a server with this additional NIC, but we will also specify the existing GB_0 network so that Ops Center can associate the right resources together. The GB_0 acts as sort of a key to tie our new declaration to the old system already discovered. Go to the Assets tab, select All Assets, and then in the Actions tab, select Add Asset. Rather than going through a discovery this time, we will manually declare a new asset. When we declare it, we will give the hostname, IP address, system model that match those that have already been discovered. Then, we will declare both GB_0 with its existing MAC and the new GB_4 with its MAC. Remember that we collected the MAC for GB_4 when we created its device alias. After you declare the asset, you will see the new NIC in the connectivity tab for the asset. You will notice that only the NICs you listed when you declared it are seen now. If you want Ops Center to see all of the existing NICs as well as the additional one, declare them as well. Add the other GB_1, GB_2, GB_3 links and their MACs just as you did GB_0 and GB_4. Installing the OS Once you have declared the asset, you can create an OS Provisioning profile for Solaris 11 in the same way that you did for Solaris 10. The only difference from any other provisioning profile you might have created already is the network to use for installation. Again, use GB_N/netN where N is the interface number you used for your device alias and in your declaration. And away you go. When the system boots from the network, the automated installer (AI) is able to see which system manifest to use, based on the new MAC that was associated, and the system gets installed. {0} ok {0} ok printenv network-boot-argumentsnetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok devalias net net /pci@780/pci@0/pci@1/network@0{0} ok devalias net4 net4 /pci@780/pci@0/pci@8/network@0,2{0} ok devalias net /pci@780/pci@0/pci@8/network@0,2{0} ok setenv network-boot-arguments host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cginetwork-boot-arguments = host-ip=10.140.204.234,router-ip=10.140.204.1,subnet-mask=255.255.254.0,hostname=atl-sewr-52,client-id=01002128204292,file=http://10.140.204.22:5555/cgi-bin/wanboot-cgi{0} ok {0} ok boot net - installBoot device: /pci@780/pci@0/pci@8/network@0,2 File and args: - install/pci@780/pci@0/pci@8/network@0,2: 1000 Mbps link up<time unavailable> wanboot info: WAN boot messages->console<time unavailable> wanboot info: configuring /pci@780/pci@0/pci@8/network@0,2...SunOS Release 5.11 Version 11.0 64-bitCopyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.Remounting root read/writeProbing for device nodes ...Preparing network image for useDownloading solaris.zlib--2012-02-17 15:10:17-- http://10.140.204.22:5555/var/js/AI/sparc//solaris.zlibConnecting to 10.140.204.22:5555... connected.HTTP request sent, awaiting response... 200 OKLength: 126752256 (121M) [text/plain]Saving to: `/tmp/solaris.zlib'100%[======================================>] 126,752,256 28.6M/s in 4.4s 2012-02-17 15:10:21 (27.3 MB/s) - `/tmp/solaris.zlib' saved [126752256/126752256] Conclusion So, why go to all of this trouble? More and more, I find that customers are wiring their data center to only use higher speed networks - 10GbE only to the hosts. Some customers are moving aggressively toward consolidated networks combining storage and network on CNA NICs. All of this means that network-based provisioning cannot rely exclusively on the built-in network interfaces. So, it's important to be able to provision a system using other than the built-in networks. Turns out, that this is pretty straight-forward for both Solaris 10 and Solaris 11 and fits into the Ops Center deployment process quite nicely. Hopefully, you will be able to use this as you build out your own private cloud solutions with Ops Center.

Read the article

Code Contracts: Unit testing contracted code

- by DigiMortal

Code contracts and unit tests are not replacements for each other. They both have different purpose and different nature. It does not matter if you are using code contracts or not – you still have to write tests for your code. In this posting I will show you how to unit test code with contracts. In my previous posting about code contracts I showed how to avoid ContractExceptions that are defined in code contracts runtime and that are not accessible for us in design time. This was one step further to make my randomizer testable. In this posting I will complete the mission. Problems with current code This is my current code. public class Randomizer { public static int GetRandomFromRangeContracted(int min, int max) { Contract.Requires<ArgumentOutOfRangeException>( min < max, "Min must be less than max" ); Contract.Ensures( Contract.Result<int>() >= min && Contract.Result<int>() <= max, "Return value is out of range" ); var rnd = new Random(); return rnd.Next(min, max); } } As you can see this code has some problems: randomizer class is static and cannot be instantiated. We cannot move this class between components if we need to, GetRandomFromRangeContracted() is not fully testable because we cannot currently affect random number generator output and therefore we cannot test post-contract. Now let’s solve these problems. Making randomizer testable As a first thing I made Randomizer to be class that must be instantiated. This is simple thing to do. Now let’s solve the problem with Random class. To make Randomizer testable I define IRandomGenerator interface and RandomGenerator class. The public constructor of Randomizer accepts IRandomGenerator as argument. public interface IRandomGenerator { int Next(int min, int max); } public class RandomGenerator : IRandomGenerator { private Random _random = new Random(); public int Next(int min, int max) { return _random.Next(min, max); } } And here is our Randomizer after total make-over. public class Randomizer { private IRandomGenerator _generator; private Randomizer() { _generator = new RandomGenerator(); } public Randomizer(IRandomGenerator generator) { _generator = generator; } public int GetRandomFromRangeContracted(int min, int max) { Contract.Requires<ArgumentOutOfRangeException>( min < max, "Min must be less than max" ); Contract.Ensures( Contract.Result<int>() >= min && Contract.Result<int>() <= max, "Return value is out of range" ); return _generator.Next(min, max); } } It seems to be inconvenient to instantiate Randomizer now but you can always use DI/IoC containers and break compiled dependencies between the components of your system. Writing tests for randomizer IRandomGenerator solved problem with testing post-condition. Now it is time to write tests for Randomizer class. Writing tests for contracted code is not easy. The main problem is still ContractException that we are not able to access. Still it is the main exception we get as soon as contracts fail. Although pre-conditions are able to throw exceptions with type we want we cannot do much when post-conditions will fail. We have to use Contract.ContractFailed event and this event is called for every contract failure. This way we find ourselves in situation where supporting well input interface makes it impossible to support output interface well and vice versa. ContractFailed is nasty hack and it works pretty weird way. Although documentation sais that ContractFailed is good choice for testing contracts it is still pretty painful. As a last chance I got tests working almost normally when I wrapped them up. Can you remember similar solution from the times of Visual Studio 2008 unit tests? Cannot understand how Microsoft was able to mess up testing again. [TestClass] public class RandomizerTest { private Mock<IRandomGenerator> _randomMock; private Randomizer _randomizer; private string _lastContractError; public TestContext TestContext { get; set; } public RandomizerTest() { Contract.ContractFailed += (sender, e) => { e.SetHandled(); e.SetUnwind(); throw new Exception(e.FailureKind + ": " + e.Message); }; } [TestInitialize()] public void RandomizerTestInitialize() { _randomMock = new Mock<IRandomGenerator>(); _randomizer = new Randomizer(_randomMock.Object); _lastContractError = string.Empty; } #region InputInterfaceTests [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_min_is_not_less_than_max() { try { _randomizer.GetRandomFromRangeContracted(100, 10); } catch (Exception ex) { throw new Exception(string.Empty, ex); } } [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_min_is_equal_to_max() { try { _randomizer.GetRandomFromRangeContracted(10, 10); } catch (Exception ex) { throw new Exception(string.Empty, ex); } } [TestMethod] public void GetRandomFromRangeContracted_should_work_when_min_is_less_than_max() { int minValue = 10; int maxValue = 100; int returnValue = 50; _randomMock.Setup(r => r.Next(minValue, maxValue)) .Returns(returnValue) .Verifiable(); var result = _randomizer.GetRandomFromRangeContracted(minValue, maxValue); _randomMock.Verify(); Assert.AreEqual<int>(returnValue, result); } #endregion #region OutputInterfaceTests [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_return_value_is_less_than_min() { int minValue = 10; int maxValue = 100; int returnValue = 7; _randomMock.Setup(r => r.Next(10, 100)) .Returns(returnValue) .Verifiable(); try { _randomizer.GetRandomFromRangeContracted(minValue, maxValue); } catch (Exception ex) { throw new Exception(string.Empty, ex); } _randomMock.Verify(); } [TestMethod] [ExpectedException(typeof(Exception))] public void GetRandomFromRangeContracted_should_throw_exception_when_return_value_is_more_than_max() { int minValue = 10; int maxValue = 100; int returnValue = 102; _randomMock.Setup(r => r.Next(10, 100)) .Returns(returnValue) .Verifiable(); try { _randomizer.GetRandomFromRangeContracted(minValue, maxValue); } catch (Exception ex) { throw new Exception(string.Empty, ex); } _randomMock.Verify(); } #endregion } Although these tests are pretty awful and contain hacks we are at least able now to make sure that our code works as expected. Here is the test list after running these tests. Conclusion Code contracts are very new stuff in Visual Studio world and as young technology it has some problems – like all other new bits and bytes in the world. As you saw then making our contracted code testable is easy only to the point when pre-conditions are considered. When we start dealing with post-conditions we will end up with hacked tests. I hope that future versions of code contracts will solve error handling issues the way that testing of contracted code will be easier than it is right now.

Search Results

Search found 19539 results on 782 pages for 'pretty print'.

Page 201/782 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208 | Next Page >

- by Mark

- by justin01

- by jacksonSD

- by barak manos

- by joshcomley

- by user1508167

- by user1693359

- by Michael

- by user363243

- by Vardhaman

- by Namuna

- by Adrift

- by user1874574

- by David

- by wandersolo

- by duhaime

- by David

- by Rick Strahl

- by Tim Dexter

- by terje

- by SeanMcAlinden

- by Rick Strahl

- by alanc

- by scottdickson

- by DigiMortal

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208 | Next Page >