Search Results

Search found 6703 results on 269 pages for 'amd graphics'.

Page 202/269 | < Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• Many different BSOD

  - by Exa

  I'm experiencing multiple bluescreens for a couple of months now. Their error code is as diverse as their time of occurence... Sometimes it happens during gaming, sometimes when watching videos, sometimes when the computer is idle. These are the bluescreens I see most often: PAGE_FAULT_IN_NONPAGED_AREA KMODE_EXCEPTION_NOT_HANDLED IRQL_NOT_LESS_OR_EQUAL SYSTEM_SERVICE_EXCEPTION SYSTEM_THREAD_EXCEPTION INTERRUPT_EXCEPTION_NOT_HANDLED DRIVER_IRQL_NOT_LESS_OR_EQUAL DRIVER_OVERRAN_STACK_BUFFER Responsible drivers (according to the memory dumps): hal.dll tcpip.sys dxgmms1.sys ndis.sys mouhid.sys atikmdag.sys dump_atapi.sys and of course: ntoskrnl.exe My first thought was a driver incompatibility because I am using Windows 8 and some of the bluescreens seem to come from driver issues. All drivers are up to date. I'm afraid that my memory is broken or the mainboard or both. I used the windows integrated memtest which didn't find any errors. Memtest86 found some errors. Does it make sense to buy new memory? Couldn't it be a problem of the board as well? I also read that my memory could run at a too low voltage. But it's set to 1.5V as recommended. Another guess would be to set the memory's latencies manually, but how do I know which ones to try? Here is a screenshot of bluescreenview showing the latest bluescreens. Maybe someone has faced the same behavior before and found a solution. Any ideas or suggestions? Current setup on which the bluescreens occur. Windows 8 RTM (6.2.9200) Asrock 970 Extreme4 AMD FX-8150 ATI Radeon HD5850 16 GB RAM (DDR3-1800) Latest drivers for all devices

  Read the article

• Inverting colors of a PDF

  - by legr3c

  I need to invert all the colors of a PDF document (background, text, graphics, and images). I want it persistent in the file so the inverted viewing options, that some viewers offer, won't help. Rasterizing the document and using image manipulation software is also not an option. I read somewhere that this can be done with the Enfocus PitStop plugin for Acrobat. However I didn't see a corresponding command anywhere. Am I missing something? Then I read that the ARTS PDF Crackerjack plugin for Acrobat offers negative printing so I tried that, too. The option is there but it simply doesn't work. I have been searching for very long for a way to do this. It seems like a common enough task but I just can't find out how to do it. Are there maybe any virtual printer drivers or something of the sort that support negative printing? Can anyone help?

  Read the article

• Google Chrome gets really slow on 10+ open tabs

  - by Anton

  For some time already I face a problem with Google Chrome. I really love this browser, but on Windows 7 on a pretty decent machine (i5, 4GB RAM) it gets REALLY slow when I open for instance 10 techcrunch.com pages. Once I do that it becomes virtually difficult to scroll through pages and the general responsiveness of the browser gets down. And if I open 20+ or 30+ tabs there is a good chance all of them will crash. Does anyone got an idea? This happens to me on several PCs with Windows 7 64bit. At 10 tabs there is 600-700MB memory used by Chrome. Two systems have the issue are both laptops with integrated graphics. One by Intel, the other an nVidia GeForce 310M.

  Read the article

• DVI problem with LG L204WT

  - by Holgerwa

  I have a LG L204WT which has VGA and DVI connectors. Until recently, I have used the monitor via VGA, but now I have upgraded the graphics board and switched to DVI. The problem is that each time after the computer starts, the monitor either doesn't show anything (black screen, but doesn't go into standby) or the picture is distorted. I then switch the monitor off and on several times, and at some point it starts correctly and then I can work as usual. This only happens on startup. It is one out of 3 monitors, the other two work fine. It seems to me as if the monitor is not able to synchronize on the DVI signal and either shows a distorted picture or nothing at all. There are no settings in the monitor setup that would change anything. What could be the problem?

  Read the article

• Ubuntu odd mouse and keyboard behavior when window gains inner focus

  - by Scott

  This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

  Read the article

• I cannot connect to home server after a few hours

  - by Iago

  I have an old PC and I decided to revive it. A LAMP (for my own use) and a P2P server (torrent and e2dk). My old PC is an AMD Athlon XP (1400 MHz) with 384 Mb of RAM First of all I installed Ubuntu Server 11.10, SSH, FTP, SAMBA and LAMP. With this configuration my home server works well, with no problem. Then I went to the P2P server and I tried rTorrent and then uTorrent Server Alpha. And here is my problem. After a few hours (maybe 10 hours, or maybe 30 hours) with the torrent app running (rTorrent or uTorrent) I lose the connection to my home server. That is, I cannot access via ssh, I cannot access the apache server, etc. but I can ping the home server. It seems that the server freezes and all I can do is reboot the server physically. So, I have two questions: What is the problem? and How can I solve it?

  Read the article

• Termite colony simulator using java

  - by ashii

  hi everyone, i hve to design a simulator that will maintain an environment, which consists of a collection of patches arranged in a rectangular grid of arbitrary size. Each patch contains zero or more wood chips. A patch may be occupied by one or more termites or predators, which are mobile entities that live within the world and behave according to simple rules. A TERMITE can pick up a wood chip from the patch that it is currently on, or drop a wood chip that it is carrying. Termites travel around the grid by moving randomly from their current patch to a neighbouring patch, in one of four possible directions. New termites may hatch from eggs, and this is simulated by the appearance of a new termite at a random patch within the environment. A PREDATOR moves in a similar way to termites, and if a predator moves onto a patch that is occupied by a termite, then the predator eats the termite. At initialization, the termites, predators, and wood chips are distributed randomly in the environment. Simulation then proceeds in a loop, and the new state of the environment is obtained at each iteration. i have designed the arena using jpanel but im not able to randomnly place wood,termite and predator in that arena. can any one help me out?? my code for the arena is as following: 01 import java.awt.*; 02 import javax.swing.*; 03 04 public class Arena extends JPanel 05 { 06 private static final int Rows = 8; 07 private static final int Cols = 8; 08 public void paint(Graphics g) 09 { 10 Dimension d = this.getSize(); 11 // don't draw both sets of squares, when you can draw one 12 // fill in the entire thing with one color 13 g.setColor(Color.WHITE); 14 // make the background 15 g.fillRect(0,0,d.width,d.height); 16 // draw only black 17 g.setColor(Color.BLACK); 18 // pick a square size based on the smallest dimension 19 int sqsize = ((d.width<d.height) ? d.width/Cols : d.height/Rows); 20 // loop for rows 21 for (int row=0; row<Rows; row++) 22 { 23 int y = row*sqsize; // y stays same for entire row, set here 24 int x = (row%2)*sqsize; // x starts at 0 or one square in 25 for (int i=0; i<Cols/2; i++) 26 { 27 // you will only be drawing half the squares per row 28 // draw square 29 g.fillRect(x,y,sqsize,sqsize); 30 // move two square sizes over 31 x += sqsize*2; 32 } 33 } 34 35 } 36 37 38 39 public void update(Graphics g) { paint(g); } 40 41 42 43 public static void main (String[] args) 44 { 45 46 JFrame frame = new JFrame("Arena"); 47 frame.setSize(600,400); 48 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); 49 frame.setContentPane(new Arena()); 50 frame.setVisible(true); 51 } 52 53 }

  Read the article

• Why Can't Computers Off My Network See the Site?

  - by nmagerko

  Have just set up Apache, PHP, MySQL, etc. on my Ubuntu OS, and I was wondering why computers that are not on my network can not see the basic index.html that Apache uses as the default. I set up the static ip address for my computer, and I use 192.168.1.100 for computers to view the simple site. Is there something I am missing that will allow others to access my site? (It is REALLY simple; no graphics, CSS, etc.)

  Read the article

• BSOD after PC has been running for a while

  - by user1389999

  I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

  Read the article

• Screen randomly goes blue/black/white

  - by FubsyGamer

  Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

  Read the article

• what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

  - by Michael Borgwardt

  When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

• ubuntu lucid: blank screen AFTER login. Please help!

  - by keisimone

  Hi there, after i did a partial upgrade my screen went blank. I think i used an onboard graphics card but i cannot be sure. Please advise me. i tried Ctrl+Alt+F1 at startup and did a apt-get upgrade and apt-get update. Didn't work. Am very frustrated after spending 3 days to get ubuntu to work for it to kill my screen the moment i did a first update. Please help.

  Read the article

• Chrome Lockups Windows 7 64-bit

  - by Mike Chess

  I'm running Google Chrome (6.0.427.0 dev) on Windows 7 Home Premium 64-bit (AMD Phenom 3.00 GHz, 8 GB RAM). The computer lockups hard after running Chrome for about five minutes. The lockup happens whether Chrome is actually being used to browse web sites or it is just idling. No programs can be started or interacted with when this happens. The computer must be power-cycled to recover. The lockup happens regardless of which web sites are being browsed. The system event logs do not show any events around the time when the lockup transpired. All other applications run just fine on this system. In fact, Chrome ran without issue for several months on this system (the system was brand new 03-2010). I also run the same version of Chrome on other computers (Windows XP SP3) without issue. I've come to really like Chrome and use it as my default browser whenever possible. What could be causing Chrome to cause the system to lockup as it does? Does Chrome have any logs that aren't part of the Windows event log? Does Chrome have a debug command line switch that might reveal more about what happens?

  Read the article

• Java SWT - placing image buttons on the image background

  - by foma

  I am trying to put buttons with images(gif) on the background which has already been set as an image (shell.setBackgroundImage(image)) and I can't figure out how to remove transparent border around buttons with images. I would be grateful if somebody could give me some tip about this issue. Here is my code: import org.eclipse.swt.widgets.*; import org.eclipse.swt.layout.*; import org.eclipse.swt.*; import org.eclipse.swt.graphics.*; public class Main_page { public static void main(String[] args) { Display display = new Display(); Shell shell = new Shell(display); Image image = new Image(display, "bg.gif"); shell.setBackgroundImage(image); shell.setBackgroundMode(SWT.INHERIT_DEFAULT); shell.setFullScreen(true); Button button = new Button(shell, SWT.PUSH); button.setImage(new Image(display, "button.gif")); RowLayout Layout = new RowLayout(); shell.setLayout(Layout); shell.open(); while (!shell.isDisposed()) { if (!display.readAndDispatch()) display.sleep(); } display.dispose(); } } Sorceror, thanks for your answer I will definitely look into this article. Maybe I will find my way. So far I have improved my code a little bit. Firstly, I managed to get rid of the gray background noise. Secondly, I finally succeeded in creating the button as I had seen it in the first place. Yet, another obstacle has arisen. When I removed image(button) transparent border it turned out that the button change its mode(from push button to check box). The problem is that I came so close to the thing I was looking for and now I am a little puzzled. If you have some time please give a glance at my code. Here is the code, if you launch it you will see what the problem is(hope you didn't have problems downloading images): import org.eclipse.swt.widgets.*; import org.eclipse.swt.layout.*; import org.eclipse.swt.*; import org.eclipse.swt.graphics.*; public class Main_page { public static void main(String[] args) { Display display = new Display(); Shell shell = new Shell(display); Image image = new Image(display, "bg.gif"); // Launch on a screen 1280x1024 shell.setBackgroundImage(image); shell.setBackgroundMode(SWT.TRANSPARENT); shell.setFullScreen(true); GridLayout gridLayout = new GridLayout(); gridLayout.marginTop = 200; gridLayout.marginLeft = 20; shell.setLayout(gridLayout); // If you replace SWT.PUSH with SWT.COLOR_TITLE_INACTIVE_BACKGROUND // you will see what I am looking for, despite nasty check box Button button = new Button(shell, SWT.PUSH); button.setImage(new Image(display, "moneyfast.gif")); shell.open(); while (!shell.isDisposed()) { if (!display.readAndDispatch()) display.sleep(); } display.dispose(); }

  Read the article

• System Lags/Freezes when under high usgage

  - by tom

  I am not sure if its my GPU / Memory or Hard drive thats failing. For example if I'm runnning more than one instance of chrome and running an application that takes up a lot of resources, my system will start to lag and freeze. When I launch Photoshop the GPU feature disables automatically, this also lags when I click on menus and when working on documents in Photoshop. I really dont know where to start, if i should buy a new graphics card or test the memory or could it be my OS drive? System: Windows 7 64bit, ATI Raedeon 5850, Corsair 2x4GB http://i.stack.imgur.com/qqkLZ.jpg

  Read the article

• Motherboard Dying? AHCI Drive Init and boot loop intermittent failure

  - by Adam Heath

  My computer is now intermittently failing to boot up. For the last couple of days, when I turn it on it hangs on "AHCI Drive Init...", and when powered off and on again, it booted up fine. Today, it did the same but failed in a few other ways too, seemingly at random: Hangs on "AHCI Drive Init..." Boot loop (after "AHCI Drive Init..." appears for a split second (no drives listed)) Black screen (after "AHCI Drive Init..." appears for a split second, a black screen with all fans still running) The interesting part is that the above is not affected by what drives are connected, or what to. I have tried both disks, each disk individually and no disks (along with trying the primary and secondary SATA controllers), none of this has any effect on what happens. After about 20+ attempts of different combinations, it suddenly decided it would boot up into Windows, and I hadn't touched anything for about 2 cycles. Motherboard: Gigabyte GA-870A-USB3 Processor: Amd Phoenom II x6 1090T RAM: 8GB Corsair 1600 Primary Disk: Plextor 128GB SSD Secondary Disk: Western Digital Black 1TB OS: Windows 8.1 Is this my motherboard dying? Or could something else be the cause? Thanks!

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• Best window manager for Linux for Virtual Desktop / Multimon

  - by mattcodes

  Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties: 1) Supports virtual desktop (need 4 minimum) 2) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) 3) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first window when 2nd screen is unplugged 4) Keyboard shortcut friendly 5) Not too hard to install 6) Works well with minimum hardware such as integrated graphics Please suggest and share your experiences

  Read the article

• No External Sound

  - by Walter

  I have ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal did alsamixer seems to recognize my soundcard, though the driver is not listed in system - admin -hardware drivers, the only driver listed is my graphics card. I have tried several forums and it seems no one is interested in responding to sound issues. Here's hoping it is different here.

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• SSD runs faster on Windows as compared to Linux [closed]

  - by wushugene

  Windows 7 seems to install, boot and run much smoother & faster than each the three linux distros I have recently tried (Ubuntu 12.04 unity, Linux mint 13 MATE, and Fedora 17 on gnome 3.4). Why am I facing bad performance in Linux? I have tweaked my Linux installs for the SSD (enabling trim, disabling swap, etc.) I'm using an Acer TravelMate with i5-2410m processor, intel hd 3000 graphics, 8 gigs of ram, and a 256 gb samsung 830 ssd. Edit: Boot times are 10-15 seconds slower, there is noticeable delay from login to fully loaded desktop, and in general does not appear to be as responsive as my old windows 7 install or the Linux guests I had running on it.

  Read the article

• Strange File-Server I/O Spikes - What Is Causing This?

  - by CruftRemover

  I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

  Read the article

< Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >