Search Results

Search found 8358 results on 335 pages for 'external harddrive'.

Page 202/335 | < Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >

• Is the 4-pin PSU connector required? (Trying to connect a PSU to a mini case.)

  - by Geeks On Hugs

  I am trying to build a computer, placing an ASUS P8H67-I DELUXE in a custom retro C64 case. The case is an extra small form factor which can accomodate the Mini ITX board, but requires an external power supply, similar to the power-bricks that laptops use. I am looking at different power supplies and like these, but cannot figure out whether/how to power this system because they provide a 24-pin connector, but the motherboard has a 4-pin connector as well. Is the 4-pin connector optional or is it required? If it is required, how can I provide power for this system?

  Read the article

• Time machine link error

  - by robinjam

  When attempting to perform a Time Machine backup, the backup appears to proceed as normal, until it finishes copying files at which point it complains that an "error occurred while linking files for" one of my external hard disks. During the previous backup that particular disk was in fact empty, and therefore I can't understand why Time Machine is attempting to link back to it. But alas. I've verified all my disks using Disk Utility and they all appear to be fine. Does anybody know what causes this error, and how I might go about fixing it? Failing that is there a way to force Time Machine to create a brand new backup rather than an incremental one? Thanks in advance!

  Read the article

• Does ILOM on recent Sun rackmount servers fully support Linux?

  - by orange80

  Do the recent Sun rackmount servers with ILOM fully support installation of Linux (Ubuntu or Fedora maybe) via the ILOM (connected by ssh) without having to hook up a display, kbd, and mouse? I have an old Sun v20z right now that will install Solaris no problem over the Service Processor but when trying to install Ubuntu 9 64-bit server I get one line on the console then it goes blank. I'd be interested in know which if any of the recent x64 models would allow me to install and run linux while completely avoiding any need for external display, keyboard, or mouse. Thanks!

  Read the article

• nvidia twinview in ubuntu with large resolutions not working

  - by knittl

  i bought an external monitor and can't get it to work properly with my laptop screen. my laptop screen has a resolution of 1920x1200 and the new monitor has 1920x1080 when i open nvidia-settings and select the maximum resolution for each of the screen, one screen will always stay blank. if i select a smaller resolution for one of the two it will work. 1920x1200 + 1440x900 = works 1680x1050 + 1920x1080 = works 1920x1200 + 1920x1080 = doesn't work (but that's what i want to have!) my graphics card is an 01:00.0 VGA compatible controller: nVidia Corporation Quadro FX 360M (rev a1) (output from lspci), driver is proprietary nvidia driver, operating system is ubuntu. any help greatly apreciated

  Read the article

• Windows 7 just corrupted Microsoft F# and now won't fix itself.

  - by user225626

  I lost half a year's worth of custom CGAL/GMP/LEDA/Qt3/Qt4/MPFR/MPFI/Visual Studio/Boost/blahblahblah open source nonsense with DLLs that are scattered in various parts of the OS that I had gotten to finally work. All because F#, which came with .NET 4 and which I never, ever used, is now "corrupted" one day for reasons only Windows 7 knows, and now Windows 7 won't even boot. Of course none--none--of the above setup works as accessed from the USB port. How do I remove a corrupted file that prevents a Windows 7 from booting, or even being fixed by an external CD mount of the Windows 7? Thanks for any help.

  Read the article

• How can I guess if a USB cable will power my devices?

  - by rsanchez

  I've had problems with one long (4 meter) USB Mini-B to USB Type-A cable not being able to boot a 2.5'' external hard disc due to not supplying enough current. On top of that, the cable used a Type-A to Mini-B adapter for the Mini-B part, which probably made things worse. Three different shorter cables I got around made the hard disk work without extra current, so it was definitively the cable's fault. However, if I plugged the hard disk to the power, and used the long cable just for data it worked. Here is some related information on powering through USB cables: http://www.girr.org/mac_stuff/usb_stuff.html I have not any long cables that don't have an intermediary Type-A to Mini-B adapter to try them out. My question is: is there a way to guess if a cable will provide enough power for charge/disk drive power? Is it related to the length of the cable, to the build quality of the cable, or the fact that uses intermediary adapters?

  Read the article

• reverse proxy only from one internal server

  - by hrost

  I have configured a reverse proxy and is working ok for one internal server, for example our mail server. Now, I like to know if it is possible to configure a reverse proxy for only one server /application (in this case our web intranet). Our problem is Intranet call another aplication inside same intranet server and another internal servers, and the only way that I know to publish this resources is make a reverse proxy in our dmz apache for all apllications servers, but I like that from our DMZ reverse apache only intranet will be called, and other applications will be called by intranet server, and not reverse proxy. I like to configure with this system for security reason, and only allow external access to one server. I have configured With Debian Squeeze and apache 2.2 It is possible? How?

  Read the article

• Looking for Mini itx capable of running Photoshop + Illustrator (cs4 or higher)

  - by drozzy

  Ok, so I want to build a small pc for my gf that she can take with her instead of the crappy laptop that she has. Overall I think the complete system should not weight more than 10 lbs. The requirements are to run at least 4 applications simultaneously, and be able to switch between them with no problems: Photoshop Illustrator Word editor Browser Should be able to handle 1920x1200 resolution. I am currently looking at LGA775 socket as I can just transfer my desktop cpu Q6600 to it. Currently deciding between DQ45EK and DG41TX, but any other suggestions are welcome. So I am thinking something along the lines of: MINI-BOX M350 Case with 90 watt psu Q6600 cpu (my desktop cpu) 2x2GB kingston ram (or similar) Video? Need external or built-in G45 on DQ45EK will do? My primary concern is whether the 90WATT is sufficient of the Q6600? Thanks

  Read the article

• How can I register a custom protocol with xdg?

  - by julien

  I've been struggling this morning trying to associate an application with a custom protocol, namely emacsclient and org-protocol. I'm calling this protocol from a webbrowser bookmarklet, and I get the following behaviour : In chromium, the "Launch Application" dialog comes up, and calls xdg-open org-protocol://... which ends up firing a new chromium frame. In firefox, I've tried setting network.protocol-handler.app.org-protocol to an empty string or my emacsclient path, anyhow I get the following error message : "Firefox doesn't know how to open this address, because the protocol (org-protocol) isn't associated with any program" without even showing any external application selection dialog. I'm not using any desktop environment, so I need to make this work strictly with xdg, however, despite reading the shared mime info spec etc, I still can't fathom a working configuration.

  Read the article

• How do I recover lost/inacessible data from my storage device?

  - by TomWij

  What steps can I take to try to recover lost or inaccessible data from any storage device? Answers: This applies to any main storage devices; eg. internal/external hard drive, USB stick, Flash memory. The most important thing is to STOP using it, any type of I/O can ruin your chances of a recovery. Click here in case you suspect corruption or bad sectors. Click here in case you suspect mechanical issues.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• UDP Reverse Proxy

  - by user180195

  I have found a way to make reverse-proxy to an external IP. Here is how someone making a request will see it's request being passed: Clients sends request Request reaches the Datacenter one in some place That datacenter, acting as a reverse proxy will redirect the same exact request to another datacenter. The datacenter will then process the request Although, this only works with TCP/HTTP (Looking currently at HaProxy). I am hosting game servers at the other datacenter (where the proxy is not) that are using UDP protocol. Do you know how can I setup a reverse proxy using the UDP protocol.

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• View unknown content-types in Firefox?

  - by dirtside

  A certain URL on my server returns Content-Type: application/json. The filename ends with .phtml, so whenever I go to it, Firefox 3.5 asks me if I want to save it or open it with another program. But the answer is neither; I want to view it in Firefox as if it was text/plain. Suggestions? The Applications tab of the Preferences window doesn't give this as an option for the "PHTML" type which now is listed in there (ever since I tried to open it with no external program).

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• Force users to access SSL site using specific host header

  - by mwillmott

  Hi, So i am running IIS7 with one SSL site on it. I have a few different domains and subdomains that all point to my external IP. When using http they all direct to their respective sites using host headers. Whenever someone uses https on any of the domains they all point to my SSL site. I only want people who type in https://sub.domain.com (for example) to end up at my secure site and for anything else to just not go there, it can throw an error or direct to the http version, it doesn't matter. Is there a way of getting IIS7 to check the host header and throw an error if it doesn't match my specific subdomain? Thanks, Michael

  Read the article

• Connect to MySQL EC2 Instance outside of VPC

  - by Brian W

  I have a VPC setup with a few EC2 instances inside. I'm attempting to connect to a MySQL database on an EC2 instance outside the VPC, with no luck. I have the security groups on the VPC EC2 instances set to outbound 0.0.0.0/0 which I assumed would let it connect to any outbound connection. I also followed a tutorial on creating a NAT, but wasn't exactly sure how to use it to connect to an external database. In any case, if anyone has experience and knows the proper way to connect to a database outside the VPC, it would be greatly appreciated!

  Read the article

• How to query a DHCP server to get the local DNS servers

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• Bootable and remote controllable imaging software?

  - by stefan.at.wpf

  I am looking for an imaging software, that one can boot from CD or usb stick (therefore without installing anything on the system!) and then control by some kind of remote desktop. So something like a combination of Acronis TrueImage's Bootable Media and Windows Remote Desktop. I don't even need to be able to store the backup on a network drive, as an external usb hdd is attached for these purposes. Background: A system that is normally controlled by SSH / command line and therefore has no keyboard/mouse connected that I could use to control Acronis TrueImage.

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• apache requests failing

  - by Josh

  I'm trying to figure out why sometimes the client fails to load objects/requests from a dynamic page served from Apache/MySql/Debian machine. Let's say 13 objects are to be loaded for a total of 185.3 KB load, with no external objects (no DNS lookups) and no other traffic at the same time, randomly some of those object do not load. However, if I perform a refresh, sometimes all of them load or some might fail again. I only have 1Mbps/up and my DNS is been hosted externally (everydns). What could be the reason of this issue? Any comments will be appreciated.

  Read the article

• Move some iTunes library items to different drive?

  - by Sören Kuklau

  My internal hard drive is somewhat small, and I only regularly listen to a fraction of my iTunes library anyway, so I'd like to keep large portions on it on an external drive for archival purposes. Since dealing with multiple iTunes libraries is somewhat painful, the solution I'm looking for is to move individual items of the library to a different location, without compromising the "Keep organized" and "Copy files" settings. I found an AppleScript that I assume is supposed to do this, Move Files To Folder…, but it instead copies them, and doesn't update the library accordingly. I can do this manually by moving the file, then accessing it in iTunes — it'll prompt me for the new location. I just don't intend to do this one by one for thousands of files.

  Read the article

• Windows won't ctrl+c and ctrl+v

  - by Thomasstuck

  Using Ctrl+C and V I am unable to copy or paste anything. I have tried many different applications and still no luck. I am able to copy/paste via the shortcut menu when you right click the mouse. Ctrl+F works which means the Ctrl button is functional. I've tried restoring to an earlier restore point. I also ran SFC /SCANNOW (System File Checker) which did not find any errors. Ctrl+C and then right click and paste doesn't work either. I have tried with external and internal keyboard and still no luck. I've clicked on all the relevant search results from Google but none of them work for me. Does anyone know what may be causing this issue and how I can correct it? This problem comes and goes at random times.

  Read the article

• Screen is black at login screen if display driver is enabled

  - by Amir Rachum

  I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

  Read the article

• Do two portforward rules translate to "and"?

  - by blsub6

  I just set up an Exchange server to replace my DeskNow mail server. I want to start testing my internet mail exchange of my Exchange server. I can only set the MX records on my DNS up to my one external IP address so I was thinking that I could set up a firewall rule on my internet-facing firewall that port forwarded the smtp packets to two different servers. My question is: If I do that, will that mean that the smtp packets will be forwarded to just the first internal IP on the list? Or does it mean that the packet will be cloned and sent to both IPs?

  Read the article

< Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >