Search Results

Search found 27979 results on 1120 pages for 'network drive'.

Page 202/1120 | < Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >

• Restoring a Ubuntu Linux LVM drive

  - by user848106

  Scenario: I have a hard disk with a bootable sda1 partition and an Linux LVM. I seem to have corrupted the MBR? or Grub? not sure. I know it no longer boots and even with boot-repair and a Ubuntu live usb I was able to restore it. Following a "fix" with boot-repair I get "missing operating system" Can't i just reinstall grub or a new menu.lst? Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0007b68f Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM

  Read the article

• DNS Resolution doesn't work after uninstalling Cisco VPN & Deterministic Network Enhancer in Win 7

  - by Craig M

  I just upgraded my home PC to Windows 7 Ultimate 32 bit. After trying various methods to get the Cisco VPN client to work, I gave up and decided to just run it in XP mode. The last steps I tried were in this article ( http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/d880dfe5-7f44-4955-8620-2a9355d8ea8b/ ) After that, I uninstalled the Cisco client and rebooted. I uninstalled the Deterministic Network Enhancer and rebooted again. Both uninstalled successfully, but now I'm not able to resolve any DNS. The only way I can resolve DNS is to reinstall the DNE, reboot, and uninstall the DNE. Then I am able to resolve DNS lookups until I reboot again. Once it's rebooted, no more DNS. Any ideas? Edit: I completely forgot I'd asked this question until harrymc posted his answer. I've since found out that to fix this problem, I need to disable my Local Area Connection and re-enable it. Once I do that I have no trouble making network connections until the next time I reboot at which point I repeat the process. It's annoying, but manageable since I reboot very infrequently.

  Read the article

• Hardware issue: UI freezes and hard drive light goes solid several times per hour

  - by alchemical

  I have a workstation that has been acting up for the last few weeks. It currently has Windows Server 2008 R2 installed on it, and 2 HDD mirrored. A few times per hour the screen will freeze up, applications will say "not responding", sometimes the screen will turn a lighter shaded color--at the same time the HDD light is on solid. This lasts anywhere from 10 to about 50 seconds. Could this be something with one of the drives or the mechanism keeping the mirror in place? Any other ideas?

  Read the article

• Moving new drive volume out of /media

  - by nomoreflash

  I have the following filesystem: Filesystem Size Used Avail Use% Mounted on /dev/sda1 33G 2.7G 29G 9% / udev 1007M 232K 1007M 1% /dev none 1007M 244K 1007M 1% /dev/shm none 1007M 292K 1007M 1% /var/run none 1007M 0 1007M 0% /var/lock none 1007M 0 1007M 0% /lib/init/rw none 33G 2.7G 29G 9% /var/lib/ureadahead/debugfs /dev/sdb1 137G 69M 137G 1% /media/New Volume I want the /media/New Volume to become part of /. Does anyone know how I can do that without using gparted etc.?

  Read the article

• Mac Share Points automatically authenticate with matching Windows AD credentials from Windows

  - by Ron L

  I recently started administering an OS X server (10.8) that is on the same network as our AD domain. While setting up Mac Share Points, I encountered some odd behavior that I hope someone can explain. For the purposes of this example assume the following: 1) Local User on OS X Server: frank, password: Help.2012 2) AD Domain User: frank, password: Help.2012 3) AD Domain: mycompany 4) OS X Server hostname: macserver (not bound to AD, not running OD) When joined to the domain on a a Win 7 computer and logged in as frank and accessing the shares at \\macserver, it automatically authenticates using frank's OS X credentials (because they are the same). However, if I change frank's OS X password, the standard Windows authentication dialog pops-up preset to use frank's AD domain (my company\frank). However, after entering the new OS X password, it will not authenticate without changing the domain to local (.\frank). Basically, if a user in AD has the same User name and password in OS X, it will authenticate automatically regardless of the domain. If the passwords differ, authenticating to the OS X shares must be done from the local machine. (and slightly off topic - how come an OS X administrator can access the root drives on the Mac server from Windows when accessing the Mac shares even when they aren't shared? In other words, it will show all the shared folders from "File Sharing" plus whatever drives are mounted in OS X)

  Read the article

• Instant connection to wireless network but delayed internet access on Mediacom with Windows 7

  - by David

  I have Mediacom cable internet and their provided modem/wireless router a Cisco DPC3825. Each of the laptops experiencing the trouble have Windows 7 64-bit. When connecting to the wireless network each computer will take a second or two to connect and then toggle from "no internet access" to "internet access" however, no websites are accessible for about five minutes after connecting. After that, there aren't any problems. It happens on all 3 of the laptops I have available and none of them have problems on any other network. It seems like my phone doesn't have the delay issue when it connects. I've power cycled the modem/router along with a DNS flush. I have some of the DNS servers manually set to Google DNS addresses and one just default. I've contacted and had Mediacom support try all its tricks. They changed the SSID and password along with resetting the thing remotely a handful of times. It was installed just this month and seemed to pass the tech's checks upon installation. Nothing in the settings has been changed, but it's been exhibiting this problem from the get go. This guy seems to be having the same problem, but no solution was posted. http://www.dslreports.com/forum/r27372861-IA-Connection-to-Mediacom-wireless-Modem-no-internet- Help greatly appreciated.

  Read the article

• Mount network drives over ssh on Windows

  - by petersohn

  There is a remote filesystem I can reach through ssh. On Linux, there are several ways of dealing with it. I like sshfs, because with it I can work with the remote files the same way as with my local files. Is there any similar to Windows, that can map a network drive through ssh? The best I can use is WinSCP, which is good, but not good enough.

  Read the article

• Ubuntu-VirtualBox-LikeWiseOpen network disaster

  - by Sergio

  I've a virtual machine on VirtualBox 4.1.4 with Ubuntu 11.04. It was working perfectly, but after a reboot something really wrong happened: I wasn't able to connect to the internal network (same for NAT). $ sudo dhclient -v Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet System Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Error creating socket to list interfaces; Permission denied Can't get list of interfaces. The network interface is PCnet-FAST III. Additional information: $ uname -a Linux LinuxFileServer 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux Any ideas? Thanks EDIT: $ sudo ifconfig -a eth1 Link encap:Ethernet HWaddr 08:00:27:af:f2:c7 indirizzo inet6: fe80::a00:27ff:feaf:f2c7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:1000 Byte RX:0 (0 B) Byte TX:3870 (3.8 KB) Interrupt:10 lo Link encap:Loopback locale indirizzo inet:127.0.0.1 Maschera:255.0.0.0 indirizzo inet6: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:0 Byte RX:960 (960.0 B) Byte TX:960 (960.0 B)

  Read the article

• SAS Expanders vs Direct Attached (SAS)?

  - by jemmille

  I have a storage unit with 2 backplanes. One backplane holds 24 disks, one backplane holds 12 disks. Each backplane is independently connected to a SFF-8087 port (4 channel/12Gbit) to the raid card. Here is where my question really comes in. Can or how easily can a backplane be overloaded? All the disks in the machine are WD RE4 WD1003FBYX (black) drives that have average writes at 115MB/sec and average read of 125 MB/sec I know things would vary based on the raid or filesystem we put on top of that but it seems to be that a 24 disk backplane with only one SFF-8087 connector should be able to overload the bus to a point that might actually slow it down? Based on my math, if I had a RAID0 across all 24 disks and asked for a large file, I should, in theory should get 24*115 MB/sec wich translates to 22.08 GBit/sec of total throughput. Either I'm confused or this backplane is horribly designed, at least in a perfomance environment. I'm looking at switching to a model where each drive has it's own channel from the backplane (and new HBA's or raid card). EDIT: more details We have used both pure linux (centos), open solaris, software raid, hardware raid, EXT3/4, ZFS. Here are some examples using bonnie++ 4 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 194MB/s 19% 92MB/s 11% 200MB/s 8% 310/sec 194MB/s 19% 93MB/s 11% 201MB/s 8% 312/sec --------- ---- --------- ---- --------- ---- --------- 389MB/s 19% 186MB/s 11% 402MB/s 8% 311/sec 8 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 324MB/s 32% 164MB/s 19% 346MB/s 13% 466/sec 324MB/s 32% 164MB/s 19% 348MB/s 14% 465/sec --------- ---- --------- ---- --------- ---- --------- 648MB/s 32% 328MB/s 19% 694MB/s 13% 465/sec 12 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 377MB/s 38% 191MB/s 22% 429MB/s 17% 537/sec 376MB/s 38% 191MB/s 22% 427MB/s 17% 546/sec --------- ---- --------- ---- --------- ---- --------- 753MB/s 38% 382MB/s 22% 857MB/s 17% 541/sec Now 16 Disk RAID-0, it's gets interesting WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 359MB/s 34% 186MB/s 22% 407MB/s 18% 1397/sec 358MB/s 33% 186MB/s 22% 407MB/s 18% 1340/sec --------- ---- --------- ---- --------- ---- --------- 717MB/s 33% 373MB/s 22% 814MB/s 18% 1368/sec 20 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 371MB/s 37% 188MB/s 22% 450MB/s 19% 775/sec 370MB/s 37% 188MB/s 22% 447MB/s 19% 797/sec --------- ---- --------- ---- --------- ---- --------- 741MB/s 37% 376MB/s 22% 898MB/s 19% 786/sec 24 Disk RAID-1, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 347MB/s 34% 193MB/s 22% 447MB/s 19% 907/sec 347MB/s 34% 192MB/s 23% 446MB/s 19% 933/sec --------- ---- --------- ---- --------- ---- --------- 694MB/s 34% 386MB/s 22% 894MB/s 19% 920/sec 28 Disk RAID-0, ZFS 32 Disk RAID-0, ZFS 36 Disk RAID-0, ZFS More details: Here is the exact unit: http://www.supermicro.com/products/chassis/4U/847/SC847E1-R1400U.cfm

  Read the article

• Running DNS locally for home network

  - by Roy Rico

  I have a small home network that just got larger ( New roommate, My existing roommate got a laptop (on top of her computer)j, my friends coming over with laptop, etc ). I'd like to run a local DNS server for lookups of my local network stuff (fileserver.local, windowsTV.local, machineA.local, machineB.local, appletv.local). I used to have a business line with a static IP, and run bind/named internally. However, now, I have a normal account. My ISP's DNS servers are constantly changing (for whatever reasons my ISP doesn't like to keep the same IP range for long). I need my local DNS to be automatically updated to use my ISP's DNS for external traffic, but be able to maintain an internal DNS server (getting to update the hosts file is being a hassle with every new machine on top of rebuilding existing machines with win7 or Ubuntu 9.04). Additionally, My ISP's DNS servers often crash or become unresponsive. Are there any open DNS servers that are reliable (i don't want to reconfig every day) that I could use as my primary, then if those fail, then use my ISP's? UPDATE: Also looking for each workstation to be able to use dhcp to connect, but instead of getting ISP dns servers, getting my internal one.... Thanks

  Read the article

• Something eating space on OS drive

  - by noquery

  I am facing low disk space issue from last few days. I checked with Restore,System Volume Information, $Recycled folders. But there is nothing which is occupying space. I had scanned my system for virus too. Total size of C: is 18 GB. But when I select all folders inside C: and query for used space, it shows 20+ gb space is used. I vacate space some how by deleting temp files, program's cache files, disk clean up etc up to (3 gb). And I ensured that no cache/temp files are recreated who can use the space again. Even after cleaning so much data, I am again facing low disk space issue. Something is eating disk space within 15-20 mins.

  Read the article

• Proper Network Infastructure Setup DMZ, VPN, Routing Hardware Question

  - by NickToyota

  Greetings Server Fault Universe, So here's a quick background. Two weeks ago I started a new position as the systems administrator for an expanding health services company of just over 100 persons. The individual I was replacing left the company with little to no notice. Basically, I have inherited a network of one main HQ (where I am situated) which has existed for over 10 years, with five smaller offices (less than 20 persons). I am trying to make sense of the current setup. The network at the HQ includes: Linksys RV082 Router providing internet access for employees and site to site VPN connecting the smaller offices (using an RV042 each). We have both cable and dsl lines connected to balance traffic (however this does not work at all and is not my main concern right now). Cisco Ironport appliance. This is the main gateway for our incoming and outgoing emails. This also has an external IP and internal IP. Lotus domino in and out email servers connected to the mentioned Cisco gateway. These also have an external IP and internal IP. Two windows 2003 and 2008 boxes running as domain controllers with DNS of course. These also have both an external IP and internal IP. Website and web mail servers also on both external and internal IPs. I am still confused as why there are so many servers connected directly to the internet. I am seriously looking to redesign this setup with proper security practices in mind (my highest concern) and am in need of a proper firewall setup for the external/internal servers along with a VPN solution about 50 employees. Budget is not a concern as I have been given some flexibility to purchase necessary solutions. I have been told Cisco ASA appliance may help. Does anyone out in the Server Fault Universe have some recommendations? Thank you all in advance.

  Read the article

• APC Smart UPS network shutdown issue

  - by Rob Clarke

  Here is a bit about our setup: We have 2x Smart-UPS RT 6000 XL units with network management cards We are running Powerchute from a network server Powerchute is connected to the management cards of both UPSs UPSs are set to do a graceful shutdown via Powerchute when the battery duration is under 20 minutes We also have a command file that runs with Powerchute Although our setup is redundant we do not have an equal load on each server due to APC switches for single power devices The problem is that as we do not have an equal load on each server the batteries drain at different rates. This means that the UPSs both get to the specified low battery duration at completely different times. The problem here is that UPS 1 may have run down to 5 minutes and is in desperate need of initiating a Powerchute shutdown - UPS 2 still has 25 minutes of runtime so no shutdown is initiated. Consequently UPS 1 goes down and takes all the servers with and then shuts down UPS 2 as well! What we need to happen are 1 of either 2 things: Powerchute initiates the shutdown as soon as either UPS reaches the 20 minutes low battery duration setting - and doesnt wait for both The UPS with the heavier load expends its entire battery but does not shutdown both UPSs and lets the load be switched across to the UPS that still has runtime remaining. That way when the UPS that still has runtime reaches its low battery duration it can proceed with the graceful shutdown via Powerchute. Hope that makes sense, any help is greatly appreciated!

  Read the article

• DVD Drive can read a DVD title and file contents (very slowly) but not play DVDs

  - by Daisetsu

  I've been able to watch DVDs in the past on this computer when it was running XP. I recently upgraded to windows 7 and haven't watched a DVD since then. I put a DVD in and it took quite a long time but windows finally found the disk title, and I was able to explore directories (saw folder like VIDEO_TS). The problem is when I try to have video players play the DVD I just get an error in VLC. It wouldn't tell me the exact error (said to check the log and I don't know where that is). Do I have to install some special drivers/certs in windows 7 to play video?

  Read the article

• VMware Server Host-Only Network Routing

  - by Chris

  I have a windows 2008 web server machine running VMware server. I have 3 VM's - All 3 are test servers so security isn't really a concern... each of them running windows 2008 standard and some of them serving web content. My ISP only allows one MAC address to access the physical switch, however they give me 10 public IP addresses to use. My question is, if I put each VM on their own Host only network, how can I route all traffic from a specific public IP on the host, to the corresponding host only adapter, therefore routing to the specific VM? For example: A single physical Adapter on the Host has the following public IP's assigned to it in windows networking: 74.208.14.10 74.208.14.20 74.208.14.30 Each VM is on a host-only network vm1 - 192.168.196.1 vm2 - 192.168.197.1 vm3 - 192.168.198.1 On the host, I want to route all traffic from 74.208.14.10 to VM1 and 74.208.14.20 to VM2 and 74.208.14.30 to vm3 without using VMware NAT, or bridged connections. I want each server to appear to have its own public IP address. My guess is i can modify the route tables somehow, or perhaps in ICS...but i'm not sure how.

  Read the article

• CIFS mounted drive setting "stick-bit" on all files, cannot change permissions or modify files

  - by mattmcmanus

  I have a folder mounted on an Ubuntu 8.10 sever through cifs that I simply cannot change the permissions on once mounted. Here is a breakdown of what's going on: All files within the mounted folder automatically have their permissions set to -rwxrwSrwx regardless of whether the file is create on the windows server or on the linux machine. I have the same directory mounted on two other linux servers (both running 9.10 instead of 8.10) with no problems at all. They all are using the same fstab options and the same credentials. //server/folder /media/backups cifs credentials=/etc/samba/.arcadia_cred,noexec,noserverino 0 0 I've I run a chmod command a million different ways, all of which report successfully changing the permissions. However it doesn't. The issue began after I updated from 8.04 to 8.10 Any idea why this may be happening on one machine? Since it started after an upgrade I'm not sure what is the bes thing to do. Any help you could give would great! None of my automated backup scripts are working because of this!

  Read the article

• It takes a long time until Windows XP recognize I connected USB drive

  - by Pavol G

  I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

  Read the article

• missing NTLDR / no CD drive recognition

  - by Daems

  I formatted C: after installing win 7 on F: partition. on startup reported missing NTLDR changed boot seq to CD. only bleep sounds and failing boot. I could try to put the files on a USB stick and boot, but are there better options ?

  Read the article

• I can't connect to my network, except in safe mode

  - by eidylon

  My laptop cannot connect to my network all of a sudden except in safe mode. When it boots, it will show the networks available in the tray popup, but if I click connect on any, it says "Unable to connect" and the troubleshooter is useless. Shortly thereafter all the networks disappear. I have tried removing IPv6 support as I have seen that cause problems. No joy. I've also tried removing the wireless network adapter in Device Manager and reinstalling it, also no joy. I've also tried attaching a USB wireless adapter, and it has the same problem. If I boot in safe mode, then it has no problems at all. Three other devices in the house connect fine, so I am pretty sure it is nothing to do with the router. Any ideas what to check next? I am running Win7 Ultimate on a 2GHz Quadcore with 8GB RAM with a Broadcom 802.11n wireless card. EDIT: RE wired connections: What is very weird is that if i plug in a wired connection, then not only does it connect via the wired connection, but the wireLESS also starts working perfectly. And a soon as I unplug the wire, then the wireLESS stops working again! So it seems the wireless is right now working only in safe-mode, or when a wired connection is also plugged in.

  Read the article

• How to remap IPs visible from local machine to IPs visible from a machine I have SSH access to?

  - by gooli

  I'm so far out of my depth I don't even know what to google for. There's a server I can connect to via SSH. Via that server I can access other server on its subnet via SSH. What I want to do is be able to access the machines that server has access to directly. Say the server IP is 192.168.7.7 and is the only one in the 192.168.x.x range I have access to. I'd like to configure things in such a way that when I to access say 192.168.7.100 on my machine, the connection will go through an SSH tunnel I open to 192.168.7.7 and out to 192.168.7.100. I would like this to work for any port if at all possible. I know I can set an HTTP proxy and even a SOCKS proxy, but I'm wondering is there is a way to actually remap some of the IP my machine sees to IP only visible from the remote machine. What would this configuration be called? IS this NAT, VPN, IP2IP or something else? How can I set up this on a Windows client box that connects via SSH to a Linux box? Sounds to me like I need to set up some kind of filtering on the network driver or possibly a virtual NIC, but I'm not sure where to go next.

  Read the article

• Creating hard drive backup images efficiently

  - by Arrieta

  We are in the process of pruning our directories to recuperate some disk space. The 'algorithm' for the pruning/backup process consists of a list of directories and, for each one of them, a set of rules, e.g. 'compress *.bin', 'move *.blah', 'delete *.crap', 'leave *.important'; these rules change from directory to directory but are well known. The compressed and moved files are stored in a temporary file system, burned onto a blue ray, tested within the blue ray, and, finally, deleted from their original locations. I am doing this in Python (basically a walk statement with a dictionary with the rules for each extension in each folder). Do you recommend a better methodology for pruning file systems? How do you do it? We run on Linux.

  Read the article

• CentOS - mdadm raid1 drive won't mount to default location

  - by danny

  I'm running CentOS 5.5, the system, boot, swap, etc. is all on /dev/sda and I have two identical single-partition drives /dev/sdb1 /dev/sdc1 that are configured in RAID1 (using mdadm). It was working fine (configured to mount to /mnt/data in the fstab file) and I recently let yum install a couple of automatic updates without paying attention to what they were, and now it doesn't work. Raid is working fine (dmesg shows it gets loaded correctly). mdstat shows: # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[1] sdb1[0] XXXX blocks [2/2] [UU] unused devices: <none> Additionally, I can mount it anywhere other than its default directory (i.e. the following works, and I can read data off the drives). # mount /dev/md0 /mnt/data2 EXT3-fs warning: mounting fs with errors, running e2fsck is recommended But when I run the following I get: # mount -a mount: /dev/sdb1 already mounted or /mnt/data busy It says nothing is mounted when I try to umount /dev/sdb1 or umount /mnt/data, so I assume it's the second of those errors. However, lsof | grep mnt shows nothing. The weird thing is that I can save files in /mnt/data. So something is obviously mounted there, but when I try to umount it I get the error that nothing is mounted. /etc/mtab doesn't mention any of the partitions or files I am trying to work with, and fstab just has that one line I mentioned above that is supposed to mount my raid partition. Again, it was all working fine until I On Google I've found a few things about dmraid interfering with mdadm after an update, but I yum remove'd dmraid and rebooted and it didn't help. I'm really confused and need to get this working to get on with my work!

  Read the article

• Scan And Fix a RAW drive

  - by Claus Jørgensen

  Hi Basically I got the same problem as described in this thread. When I plug my HTC Hero Android Phone with USB into my Windows 7 computer I get a "Do you want to Scan and Fix" message. However, if I click "Scan and Fix", the USB instantly unplug itself, so that's no good. I've tried updating drivers from HTC with no luck. I've also tried running chkdisk from command-line with the message that it can't be used in RAW drives. This is really really annoying, and the SD card works just fine if I ignore the message, so I just want a way to disable/hide this message permanently. If anyone have some ideas how this can be done, please let me know. Thanks.

  Read the article

• eSATA hard drive falls asleep, takes ages to wake up.

  - by Dave Van den Eynde

  I'm using an external hard drive, a Western Digital MyBook 1TB of some sort with eSATA on an eSATA II ExpressCard adapter from Belkin on Windows Vista 32-bit. The issue I'm having is that after a while power management kicks in and puts the hard drive to sleep. When I resume my work and browse the drive, for example, the Explorer hangs and while I can still use my other apps, it takes a couple minutes for it to realize it should wake up the drive and recommence work. What's going on?

  Read the article

• Mac Mini won't boot with USB Drive connected

  - by Jens

  Newbie here. I have a 2012 MacMini with 2 x 3Tb Seagate GoFlex Desk external hard drives. Both drives have their own power supplies and work perfectly. I use both MacOS and Windows7 on the Mac for different reasons. Both boot and work fine. The only problem is neither MacOS or Windows will boot while the two USB drives are connected. I must disconnect the USB cables, boot and reconnect them. Then all works fine. Its rather annoying since this is mostly a Media Centre and you really don't want to be playing with cables every day, and I don't leave my stuff on over night. Can anyone help? Thanks Jens

  Read the article

< Previous Page | 198 199 200 201 202 203 204 205 206 207 208 209  | Next Page >