Search Results

Search found 63197 results on 2528 pages for 'every answer gets a point'.

Page 203/2528 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• Return on IT, Part II

  - by frank.buytendijk

  Click here to see the videoblog on how TCO misses the point and ROI doesn't work when assessing the value of IT. frank

  Read the article

• Programming doesn&rsquo;t have to be Magic

  - by Wes McClure

  In the show LOST, the Swan Station had a button that “had to be pushed” every 100 minutes to avoid disaster.  Several characters in the show took it upon themselves to have faith and religiously push the button, resetting the clock and averting the unknown “disaster”.  There are striking similarities in this story to the code we write every day.  Here are some common ones that I encounter: “I don’t know what it does but the application doesn’t work without it” “I added that code because I saw it in other similar places, I didn’t understand it, but thought it was necessary.” (for consistency, or to make things “work”) “An error message recommended it” “I copied that code” (and didn’t look at what it was doing) “It was suggested in a forum online and it fixed my problem so I left it” In all of these cases we haven’t done our due diligence to understand what the code we are writing is actually doing.  In the rush to get things done it seems like we’re willing to push any button (add any line of code) just to get our desired result and move on.  All of the above explanations are common things we encounter, and are valid ways to work through a problem we have, but when we find a solution to a task we are working on (whether a bug or a feature), we should take a moment to reflect on what we don’t understand.  Remove what isn’t necessary, comprehend and simplify what is.  Why is it detrimental to commit code we don’t understand? Perpetuates unnecessary code If you copy code that isn’t necessary, someone else is more likely to do so, especially peers Perpetuates tech debt Adding unnecessary code leads to extra code that must be understood, maintained and eventually cleaned up in longer lived projects Tech debt begets tech debt as other developers copy or use this code as guidelines in similar situations Increases maintenance How do we know the code is simplified if we don’t understand it? Perpetuates a lack of ownership Makes it seem ok to commit anything so long as it “gets the job done” Perpetuates the notion that programming is magic If we don’t take the time to understand every line of code we add, then we are contributing to the notion that it is simply enough to make the code work, regardless of how. TLDR Don’t commit code that you don’t understand, take the time to understand it, simplify it and then commit it!

  Read the article

• SQLAuthority News – Presented at Bangalore DevCon August 4, 2012

  - by pinaldave

  Bangalore Devcon 2012 was a great fun. Earlier this month I was fortunate to be invited to present at Dev Con. The event was very well planned and had excellent response. There were more than 140 attendees at any time in the sessions. There were two tracks and both tracks were running parallel to each other in the Microsoft Bangalore building. The venue is fantastic and the enthusiasm of the community is impeccable. We had a total of 12 sessions during the day. I had decided to attend each session if I can. We have so many fantastic speakers and I did not want to miss any of the sessions. As sessions were running parallel, I attended every session for 30 minutes and switched to another session. I had fun doing this experiment as tit gave me a good idea about every session. I presented personally on the session of SQL Tips and Tricks for Web Developer. DBA is a very common word and every time when we say SQL Server – lots of people think of DBA in their mind, however, SQL Server is used by many developers as well. In this session I tried to cover a few of the simple concepts where developers must pay special attention while writing T-SQL code. Sometimes a very small mistake can be very fatal on performance in the future. Here are few of the photos of the event. Btw, the two sessions which clearly stand out were Vinod Kumar‘s session on Leadership and Lohith‘s session on Visual Studio Tips and Tricks. Additional Read: Following are the blog posts by community on the Bangalore DevCon Experience. I encourage you to read them all and leave a comment which one you liked the most. http://abhishekbhat.wordpress.com/2012/08/07/devcon-2012-experience/ http://praveenprajapati.wordpress.com/2012/08/07/devcon-2012-part-2/ http://tomsblogsspot.blogspot.in/2012/08/devcon-2012.html?view=classic https://manasdash.wordpress.com/2012/08/06/devcon-2012-by-bdotnet-4th-august-2012/ http://www.jagan-bhathri.com/2012/08/bangalore-developer-conference-2012-by.html Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• IIS7 Handler Mapping Migration from Sites Config to Server Config [migrated]

  - by Danomite

  We have a bunch of sites running with about 8 handler mappings in their web.config files. Unfortunately, they were getting copied site to site every time a new one was added. Now the time has come for me to get these out of all the web.config's and get them into the server's Handler Mappings. If I add the mapping to the the server while it still exists in the web.config, IIS throws an error when you browse to the site. I have a few dozen web.config's to edit here with about 10 mappings in each. Is there a way to add these mappings to the server without having to go in an edit each web.config file manually? Otherwise, every site will be down for a few minutes while I go into each file and remove the handlers. Thanks!

  Read the article

• Migrating SQL Server Databases – The DBA’s Checklist (Part 2)

  - by Sadequl Hussain

  Continuing from Part 1  , our Migration Checklist continues: Step 5: Update statistics It is always a good idea to update the statistics of the database that you have just installed or migrated. To do this, run the following command against the target database: sp_updatestats The sp_updatestats system stored procedure runs the UPDATE STATISTICS command against every user and system table in the database.  However, a word of caution: running the sp_updatestats against a database with a compatibility level below 90 (SQL Server 2005) will reset the automatic UPDATE STATISTICS settings for every index and statistics of every table in the database. You may therefore want to change the compatibility mode before you run the command. Another thing you should remember to do is to ensure the new database has its AUTO_CREATE_STATISTICS and AUTO_UPDATE_STATISTICS properties set to ON. You can do so using the ALTER DATABASE command or from the SSMS. Step 6: Set database options You may have to change the state of a database after it has been restored. If the database was changed to single-user or read-only mode before backup, the restored copy will also retain these settings. This may not be an issue when you are manually restoring from Enterprise Manager or the Management Studio since you can change the properties. However, this is something to be mindful of if the restore process is invoked by an automated job or script and the database needs to be written to immediately after restore. You may want to check the database’s status programmatically in such cases. Another important option you may want to set for the newly restored / attached database is PAGE_VERIFY. This option specifies how you want SQL Server to ensure the physical integrity of the data. It is a new option from SQL Server 2005 and can have three values: CHECKSUM (default for SQL Server 2005 and latter databases), TORN_PAGE_DETECTION (default when restoring a pre-SQL Server 2005 database) or NONE. Torn page detection was itself an option for SQL Server 2000 databases. From SQL Server 2005, when PAGE_VERIFY is set to CHECKSUM, the database engine calculates the checksum for a page’s contents and writes it to the page header before storing it in disk. When the page is read from the disk, the checksum is computed again and compared with the checksum stored in the header.  Torn page detection works much like the same way in that it stores a bit in the page header for every 512 byte sector. When data is read from the page, the torn page bits stored in the header is compared with the respective sector contents. When PAGE_VERIFY is set to NONE, SQL Server does not perform any checking, even if torn page data or checksums are present in the page header.  This may not be something you would want to set unless there is a very specific reason.  Microsoft suggests using the CHECKSUM page verify option as this offers more protection. Step 7: Map database users to logins A common database migration issue is related to user access. Windows and SQL Server native logins that existed in the source instance and had access to the database may not be present in the destination. Even if the logins exist in the destination, the mapping between the user accounts and the logins will not be automatic. You can use a special system stored procedure called sp_change_users_login to address these situations. The procedure needs to be run against the newly attached or restored database and can accept four parameters. Depending on what you want to do, you may be using less than four though. The first parameter, @Action, can take three values. When you specify @Action = ‘Report’, the system will provide you with a list of database users which are not mapped to any login. If you want to map a database user to an existing SQL Server login, the value for @Action will be ‘Update_One’. In this case, you will only need to provide the database user name and the login it will map to. So if your newly restored database has a user account called “bob” and there is already a SQL Server login with the same name and you want to map the user to the login, you will execute a query like the following: sp_change_users_login         @Action = ‘Update_One’,         @UserNamePattern = ‘bob’,         @LoginName = ‘bob’ If the login does not exist, you can instruct SQL Server to create the login with the same name. In this case you will need to provide a password for the login and the value of the @Action parameter will be ‘Auto_Fix’. If the login already exists, it will be automatically mapped to the user account. Unfortunately sp_change_users_login system stored procedure cannot be used to map database users to trusted logins (Windows accounts) in SQL Server. You will need to follow a manual process to re-map the database user accounts.  Continues…

  Read the article

• SQLAuthority News – Technical Review of Learning at Koenig Solutions

  - by pinaldave

  Yesterday I finished my 3 days fast track in person learning of course End to End SQL Server Business Intelligence at Koenig Solutions. You can read my previous article over here regarding why am I learning SQL Server. Yesterday I blogged about my experience of arriving to Training Center and my induction with the center. The Training Days I had enrolled for three days training so my routine each of the three days was very much same. However, the content every day was different as I was learning something new every day. Let me describe a few of the interesting details of my daily routine. A Single Student Batch The best part of my training was that in my training batch, I am single student. Koenig is known to smaller batches and often they have single student batches as well. I was very much delighted to know that I will have dedicated access and attention from my trainer in my batch as I will be single student in my batch. In most of the labs I have observed there are no more than 4 students at any time. Prakash and Pinal 7:30 AM Breakfast Talk We all students gather at 7:30 in breakfast area. The best time of the day. I was the only Indian student in the group. The other students were from USA, Canada, Nigeria, Bhutan, Tanzania, and a few others from other countries. I immediately become the source of information and reference manual. Though the distance between Delhi and Bangalore is 2000+ KM I was considered as a local guy. 8:30 AMHeading to Training Center Every day without fail at 8:30 the van started from our accommodation to the training center. As mentioned in an earlier blog post the distance is about 5 minutes and we were able to reach at the location before 8:45. This gave us some time settle in before our class starts at 9:00 AM. 9:00 AM Order Lunch Food Well it may sound funny that we just had breakfast 30 minutes but the first thing everybody has to do is to order lunch as soon as the class starts. There is an online training portal to order food for the day. Everybody has to place their order early during the day so the food arrives on time during lunch time. Everybody can order whatever they want to order using an online ordering system. The options are plenty and everybody can order what they like. 9:05 AM Learning Starts After deciding the lunch we started the learning. I was very fortunate to have a very experienced trainer - Prakash Chheatry. Though I have never met him before I have heard a lot about Prakash. He is known as the top most SQL Server Trainer in India. His student list contains some of the very well known SQL Server Experts of the world and few of SQL Server “best seller” book authors. Learning continues till 1:00 PM with one tea-coffee break in between. 1:00 PM Lunch The lunch time is again the fun time. We all students get together in the afternoon and tell the stories of the world. Indeed the best part of the day beside learning new stuff. 4:55 PM Ready to Return We stop at 4:55 as at precisely 5:00 PM the van stops by the institute which takes us back to our accommodation. Trust me seriously long long day always but the amount of the learning is the win of the day. 7:30 PM Dinner Time After coming back to the accommodation I study till 7:30 and then rush for dinner. Dinner is world cuisine and deserts are really delicious. After dinner every day I have written a blog and retired early as the next day is always going to be busier than the present day. What did I learn As I mentioned earlier I know SQL Server fairly well. I had expressed the same in my conversation as well. This is the reason I was assigned a fairly senior trainer and we learned everything quite quickly. As I know quite a few things we went pretty fast in many topics. There were a few things, I wanted to learn in detail as well practice on the labs. We slowed down where we wanted and rush through the concepts where I was very comfortable. Here is the list of the things which we covered in action pack three days. Introduction to Business Intelligence (Intro) SQL Server Analysis Service (Theory and Lab) SQL Server Integration Service  (Theory and Lab) SQL Server Reporting Service  (Theory and Lab) SQL Server PowerPivot (Lab) UDM (Theory) SharePoint Concepts (Theory) Power View (Demo) Business Intelligence and Security (Discussion) Well, I was delighted that I was able to refresh lots of concepts during these three days. Thanks to my trainer and my friend who helped me to have a good learning experience. I believe all the learning  will help me in my growth and future career. With this I end my this experience. I am planning to have another online learning experience later this month. I will blog about my experience as I begin it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• Using Table-Valued Parameters With SQL Server Reporting Services

  - by Jesse

  In my last post I talked about using table-valued parameters to pass a list of integer values to a stored procedure without resorting to using comma-delimited strings and parsing out each value into a TABLE variable. In this post I’ll extend the “Customer Transaction Summary” report example to see how we might leverage this same stored procedure from within an SQL Server Reporting Services (SSRS) report. I’ve worked with SSRS off and on for the past several years and have generally found it to be a very useful tool for building nice-looking reports for end users quickly and easily. That said, I’ve been frustrated by SSRS from time to time when seemingly simple things are difficult to accomplish or simply not supported at all. I thought that using table-valued parameters from within a SSRS report would be simple, but unfortunately I was wrong. Customer Transaction Summary Example Let’s take the “Customer Transaction Summary” report example from the last post and try to plug that same stored procedure into an SSRS report. Our report will have three parameters: Start Date – beginning of the date range for which the report will summarize customer transactions End Date – end of the date range for which the report will summarize customer transactions Customer Ids – One or more customer Ids representing the customers that will be included in the report The simplest way to get started with this report will be to create a new dataset and point it at our Customer Transaction Summary report stored procedure (note that I’m using SSRS 2012 in the screenshots below, but there should be little to no difference with SSRS 2008): When you initially create this dataset the SSRS designer will try to invoke the stored procedure to determine what the parameters and output fields are for you automatically. As part of this process the following dialog pops-up: Obviously I can’t use this dialog to specify a value for the ‘@customerIds’ parameter since it is of the IntegerListTableType user-defined type that we created in the last post. Unfortunately this really throws the SSRS designer for a loop, and regardless of what combination of Data Type, Pass Null Value, or Parameter Value I used here, I kept getting this error dialog with the message, "Operand type clash: nvarchar is incompatible with IntegerListTableType". This error message makes some sense considering that the nvarchar type is indeed incompatible with the IntegerListTableType, but there’s little clue given as to how to remedy the situation. I don’t know for sure, but I think that behind-the-scenes the SSRS designer is trying to give the @customerIds parameter an nvarchar-typed SqlParameter which is causing the issue. When I first saw this error I figured that this might just be a limitation of the dataset designer and that I’d be able to work around the issue by manually defining the parameters. I know that there are some special steps that need to be taken when invoking a stored procedure with a table-valued parameter from ADO .NET, so I figured that I might be able to use some custom code embedded in the report  to create a SqlParameter instance with the needed properties and value to make this work, but the “Operand type clash" error message persisted. The Text Query Approach Just because we’re using a stored procedure to create the dataset for this report doesn’t mean that we can’t use the ‘Text’ Query Type option and construct an EXEC statement that will invoke the stored procedure. In order for this to work properly the EXEC statement will also need to declare and populate an IntegerListTableType variable to pass into the stored procedure. Before I go any further I want to make one point clear: this is a really ugly hack and it makes me cringe to do it. Simply put, I strongly feel that it should not be this difficult to use a table-valued parameter with SSRS. With that said, let’s take a look at what we’ll have to do to make this work. Manually Define Parameters First, we’ll need to manually define the parameters for report by right-clicking on the ‘Parameters’ folder in the ‘Report Data’ window. We’ll need to define the ‘@startDate’ and ‘@endDate’ as simple date parameters. We’ll also create a parameter called ‘@customerIds’ that will be a mutli-valued Integer parameter: In the ‘Available Values’ tab we’ll point this parameter at a simple dataset that just returns the CustomerId and CustomerName of each row in the Customers table of the database or manually define a handful of Customer Id values to make available when the report runs. Once we have these parameters properly defined we can take another crack at creating the dataset that will invoke the ‘rpt_CustomerTransactionSummary’ stored procedure. This time we’ll choose the ‘Text’ query type option and put the following into the ‘Query’ text area: 1: exec('declare @customerIdList IntegerListTableType ' + @customerIdInserts + 2: ' EXEC rpt_CustomerTransactionSummary 3: @startDate=''' + @startDate + ''', 4: @endDate='''+ @endDate + ''', 5: @customerIds=@customerIdList')   By using the ‘Text’ query type we can enter any arbitrary SQL that we we want to and then use parameters and string concatenation to inject pieces of that query at run time. It can be a bit tricky to parse this out at first glance, but from the SSRS designer’s point of view this query defines three parameters: @customerIdInserts – This will be a Text parameter that we use to define INSERT statements that will populate the @customerIdList variable that is being declared in the SQL. This parameter won’t actually ever get passed into the stored procedure. I’ll go into how this will work in a bit. @startDate – This is a simple date parameter that will get passed through directly into the @startDate parameter of the stored procedure on line 3. @endDate – This is another simple data parameter that will get passed through into the @endDate parameter of the stored procedure on line 4. At this point the dataset designer will be able to correctly parse the query and should even be able to detect the fields that the stored procedure will return without needing to specify any values for query when prompted to. Once the dataset has been correctly defined we’ll have a @customerIdInserts parameter listed in the ‘Parameters’ tab of the dataset designer. We need to define an expression for this parameter that will take the values selected by the user for the ‘@customerIds’ parameter that we defined earlier and convert them into INSERT statements that will populate the @customerIdList variable that we defined in our Text query. In order to do this we’ll need to add some custom code to our report using the ‘Report Properties’ dialog: Any custom code defined in the Report Properties dialog gets embedded into the .rdl of the report itself and (unfortunately) must be written in VB .NET. Note that you can also add references to custom .NET assemblies (which could be written in any language), but that’s outside the scope of this post so we’ll stick with the “quick and dirty” VB .NET approach for now. Here’s the VB .NET code (note that any embedded code that you add here must be defined in a static/shared function, though you can define as many functions as you want): 1: Public Shared Function BuildIntegerListInserts(ByVal variableName As String, ByVal paramValues As Object()) As String 2: Dim insertStatements As New System.Text.StringBuilder() 3: For Each paramValue As Object In paramValues 4: insertStatements.AppendLine(String.Format("INSERT {0} VALUES ({1})", variableName, paramValue)) 5: Next 6: Return insertStatements.ToString() 7: End Function   This method takes a variable name and an array of objects. We use an array of objects here because that is how SSRS will pass us the values that were selected by the user at run-time. The method uses a StringBuilder to construct INSERT statements that will insert each value from the object array into the provided variable name. Once this method has been defined in the custom code for the report we can go back into the dataset designer’s Parameters tab and update the expression for the ‘@customerIdInserts’ parameter by clicking on the button with the “function” symbol that appears to the right of the parameter value. We’ll set the expression to: 1: =Code.BuildIntegerListInserts("@customerIdList ", Parameters!customerIds.Value)   In order to invoke our custom code method we simply need to invoke “Code.<method name>” and pass in any needed parameters. The first parameter needs to match the name of the IntegerListTableType variable that we used in the EXEC statement of our query. The second parameter will come from the Value property of the ‘@customerIds’ parameter (this evaluates to an object array at run time). Finally, we’ll need to edit the properties of the ‘@customerIdInserts’ parameter on the report to mark it as a nullable internal parameter so that users aren’t prompted to provide a value for it when running the report. Limitations And Final Thoughts When I first started looking into the text query approach described above I wondered if there might be an upper limit to the size of the string that can be used to run a report. Obviously, the size of the actual query could increase pretty dramatically if you have a parameter that has a lot of potential values or you need to support several different table-valued parameters in the same query. I tested the example Customer Transaction Summary report with 1000 selected customers without any issue, but your mileage may vary depending on how much data you might need to pass into your query. If you think that the text query hack is a lot of work just to use a table-valued parameter, I agree! I think that it should be a lot easier than this to use a table-valued parameter from within SSRS, but so far I haven’t found a better way. It might be possible to create some custom .NET code that could build the EXEC statement for a given set of parameters automatically, but exploring that will have to wait for another post. For now, unless there’s a really compelling reason or requirement to use table-valued parameters from SSRS reports I would probably stick with the tried and true “join-multi-valued-parameter-to-CSV-and-split-in-the-query” approach for using mutli-valued parameters in a stored procedure.

  Read the article

• How to reenable Documents on iPhone?

  - by Matt

  So, I regularly plug in my iPhone to my computer to get voice recordings off of it. However, every time I plugged it in "iPhone" and "Documents on iPhone" would both mount, and "Documents on iPhone" would pop up automatically. As I normally don't need anything on there it was a bit of a nuisance, so I opened a terminal and ran: sudo apt-get install libimobiledevice-utils;idevicepair unpair && idevicepair pair as suggested a here This, however, took away my access to "Documents on iPhone" completely, and didn't provide an alternative like putting it in a folder on the main "iPhone" device. Now I actually NEED to get something off there. Is there anyway to get "Documents on iPhone" back? I would prefer it still didn't pop up automatically but that's a sacrifice I'm willing to make. UPDATE: I ran idevicepair pair and unplugged and replugged my phone. I now have Documents back but it still annoyingly opens every time I plug in.

  Read the article

• Click Once Deployment Process and Issue Resolution

  - by Geordie

  Introduction We are adopting Click Once as a deployment standard for Thick .Net application clients.  The latest version of this tool has matured it to a point where it can be used in an enterprise environment.  This guide will identify how to use Click Once deployment and promote code trough the dev, test and production environments. Why Use Click Once over SCCM If we already use SCCM why add Click Once to the deployment options.  The advantages of Click Once are their ability to update the code in a single location and have the update flow automatically down to the user community.  There have been challenges in the past with getting configuration updates to download but these can now be achieved.  With SCCM you can do the same thing but it then needs to be packages and pushed out to users.  Each time a new user is added to an application, time needs to be spent by an administrator, to push out any required application packages.  With Click Once the user would go to a web link and the application and pre requisites will automatically get installed. New Deployment Steps Overview The deployment in an enterprise environment includes several steps as the solution moves through the development life cycle before being released into production.  To make mitigate risk during the release phase, it is important to ensure the solution is not deployed directly into production from the development tools.  Although this is the easiest path, it can introduce untested code into production and result in unexpected results. 1. Deploy the client application to a development web server using Visual Studio 2008 Click Once deployment tools.  Once potential production versions of the solution are being generated, ensure the production install URL is specified when deploying code from Visual Studio.  (For details see ‘Deploying Click Once Code from Visual Studio’) 2. xCopy the code to the test server.  Run the MageUI tool to update the URLs, signing and version numbers to match the test server. (For details see ‘Moving Click Once Code to a new Server without using Visual Studio’) 3. xCopy the code to the production server.  Run the MageUI tool to update the URLs, signing and version numbers to match the production server. The certificate used to sign the code should be provided by a certificate authority that will be trusted by the client machines.  Finally make sure the setup.exe contains the production install URL.  If not redeploy the solution from Visual Studio to the dev environment specifying the production install URL.  Then xcopy the install.exe file from dev to production.  (For details see ‘Moving Click Once Code to a new Server without using Visual Studio’) Detailed Deployment Steps Deploying Click Once Code From Visual Studio Open Visual Studio and create a new WinForms or WPF project.   In the solution explorer right click on the project and select ‘Publish’ in the context menu.   The ‘Publish Wizard’ will start.  Enter the development deployment path.  This could be a local directory or web site.  When first publishing the solution set this to a development web site and Visual basic will create a site with an install.htm page.  Click Next.  Select weather the application will be available both online and offline. Then click Finish. Once the initial deployment is completed, republish the solution this time mapping to the directory that holds the code that was just published.  This time the Publish Wizard contains and additional option.   The setup.exe file that is created has the install URL hardcoded in it.  It is this screen that allows you to specify the URL to use.  At some point a setup.exe file must be generated for production.  Enter the production URL and deploy the solution to the dev folder.  This file can then be saved for latter use in deployment to production.  During development this URL should be pointing to development site to avoid accidently installing the production application. Visual studio will publish the application to the desired location in the process it will create an anonymous ‘pfx’ certificate to sign the deployment configuration files.  A production certificate should be acquired in preparation for deployment to production.   Directory structure created by Visual Studio     Application files created by Visual Studio   Development web site (install.htm) created by Visual Studio Migrating Click Once Code to a new Server without using Visual Studio To migrate the Click Once application code to a new server, a tool called MageUI is needed to modify the .application and .manifest files.  The MageUI tool is usually located – ‘C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bin’ folder or can be downloaded from the web. When deploying to a new environment copy all files in the project folder to the new server.  In this case the ‘ClickOnceSample’ folder and contents.  The old application versions can be deleted, in this case ‘ClickOnceSample_1_0_0_0’ and ‘ClickOnceSample_1_0_0_1’.  Open IIS Manager and create a virtual directory that points to the project folder.  Also make the publish.htm the default web page.   Run the ManeUI tool and then open the .application file in the root project folder (in this case in the ‘ClickOnceSample’ folder). Click on the Deployment Options in the left hand list and update the URL to the new server URL and save the changes.   When MageUI tries to save the file it will prompt for the file to be signed.   This step cannot be bypassed if you want the Click Once deployment to work from a web site.  The easiest solution to this for test is to use the auto generated certificate that Visual Studio created for the project.  This certificate can be found with the project source code.   To save time go to File>Preferences and configure the ‘Use default signing certificate’ fields.   Future deployments will only require application files to be transferred to the new server.  The only difference is then updating the .application file the ‘Version’ must be updated to match the new version and the ‘Application Reference’ has to be update to point to the new .manifest file.     Updating the Configuration File of a Click Once Deployment Package without using Visual Studio When an update to the configuration file is required, modifying the ClickOnceSample.exe.config.deploy file will not result in current users getting the new configurations.  We do not want to go back to Visual Studio and generate a new version as this might introduce unexpected code changes.  A new version of the application can be created by copying the folder (in this case ClickOnceSample_1_0_0_2) and pasting it into the application Files directory.  Rename the directory ‘ClickOnceSample_1_0_0_3’.  In the new folder open the configuration file in notepad and make the configuration changes. Run MageUI and open the manifest file in the newly copied directory (ClickOnceSample_1_0_0_3).   Edit the manifest version to reflect the newly copied files (in this case 1.0.0.3).  Then save the file.  Open the .application file in the root folder.  Again update the version to 1.0.0.3.  Since the file has not changed the Deployment Options/Start Location URL should still be correct.  The application Reference needs to be updated to point to the new versions .manifest file.  Save the file. Next time a user runs the application the new version of the configuration file will be down loaded.  It is worth noting that there are 2 different types of configuration parameter; application and user.  With Click Once deployment the difference is significant.  When an application is downloaded the configuration file is also brought down to the client machine.  The developer may have written code to update the user parameters in the application.  As a result each time a new version of the application is down loaded the user parameters are at risk of being overwritten.  With Click Once deployment the system knows if the user parameters are still the default values.  If they are they will be overwritten with the new default values in the configuration file.  If they have been updated by the user, they will not be overwritten. Settings configuration view in Visual Studio Production Deployment When deploying the code to production it is prudent to disable the development and test deployment sites.  This will allow errors such as incorrect URL to be quickly identified in the initial testing after deployment.  If the sites are active there is no way to know if the application was downloaded from the production deployment and not redirected to test or dev.   Troubleshooting Clicking the install button on the install.htm page fails. Error: URLDownloadToCacheFile failed with HRESULT '-2146697210' Error: An error occurred trying to download <file>   This is due to the setup.exe file pointing to the wrong location. ‘The setup.exe file that is created has the install URL hardcoded in it.  It is this screen that allows you to specify the URL to use.  At some point a setup.exe file must be generated for production.  Enter the production URL and deploy the solution to the dev folder.  This file can then be saved for latter use in deployment to production.  During development this URL should be pointing to development site to avoid accidently installing the production application.’

  Read the article

• How to format a USB stick

  - by VictorL

  My USB stick looks dead : victor@X301A1:~$ umount /dev/sdc1 victor@X301A1:~$ sudo mkfs -t vfat /dev/sdc1 mkfs.vfat 3.0.12 (29 Oct 2011) mkfs.vfat: unable to open /dev/sdc1: Read-only file system victor@X301A1:~$ sudo hdparm -r0 /dev/sdc1 /dev/sdc1: setting readonly to 0 (off) readonly = 0 (off) victor@X301A1:~$ sudo fsck -n /dev/sdc1 fsck de util-linux 2.20.1 dosfsck 3.0.12, 29 Oct 2011, FAT32, LFN /.Trash-1000/files/sans_titre Start does point to root directory. Deleting dir. /.Trash-1000/files/Bus CAN Start does point to root directory. Deleting dir. Reclaimed 190903 unused clusters (781938688 bytes). Free cluster summary wrong (1001897 vs. really 1383698) Auto-correcting. Leaving file system unchanged. /dev/sdc1: 8052 files, 566660/1950358 clusters Is there anyway for me to recover my USB stick ? Thank

  Read the article

• Often "running in low-graphics mode” with NVidia GeForce GT 430

  - by user42228

  Often (every fifth time perhaps) when I turn on my system, I'm greeted with the "running in low-graphics mode” window. Sometimes all I have to do is reboot and the system will start correctly, sometimes there can be a longer series of failed starts. If I go to the terminal and log in, I can run startx and my desktop will appear without problems. At the end of /var/log/Xorg.1.log I see this: [ 77.459] (EE) Screen(s) found, but none have a usable configuration. [ 77.459] Fatal server error: [ 77.459] no screens found [ 77.459] Please consult the The X.Org Foundation support at http://wiki.x.org Is the NVidia creating the appropriate XOrg configuration dynamically on every boot, or what could explain that the configuration error above only occurs sometimes?

  Read the article

• Understanding G1 GC Logs

  - by poonam

  The purpose of this post is to explain the meaning of GC logs generated with some tracing and diagnostic options for G1 GC. We will take a look at the output generated with PrintGCDetails which is a product flag and provides the most detailed level of information. Along with that, we will also look at the output of two diagnostic flags that get enabled with -XX:+UnlockDiagnosticVMOptions option - G1PrintRegionLivenessInfo that prints the occupancy and the amount of space used by live objects in each region at the end of the marking cycle and G1PrintHeapRegions that provides detailed information on the heap regions being allocated and reclaimed. We will be looking at the logs generated with JDK 1.7.0_04 using these options. Option -XX:+PrintGCDetails Here's a sample log of G1 collection generated with PrintGCDetails. 0.522: [GC pause (young), 0.15877971 secs] [Parallel Time: 157.1 ms] [GC Worker Start (ms): 522.1 522.2 522.2 522.2 Avg: 522.2, Min: 522.1, Max: 522.2, Diff: 0.1] [Ext Root Scanning (ms): 1.6 1.5 1.6 1.9 Avg: 1.7, Min: 1.5, Max: 1.9, Diff: 0.4] [Update RS (ms): 38.7 38.8 50.6 37.3 Avg: 41.3, Min: 37.3, Max: 50.6, Diff: 13.3] [Processed Buffers : 2 2 3 2 Sum: 9, Avg: 2, Min: 2, Max: 3, Diff: 1] [Scan RS (ms): 9.9 9.7 0.0 9.7 Avg: 7.3, Min: 0.0, Max: 9.9, Diff: 9.9] [Object Copy (ms): 106.7 106.8 104.6 107.9 Avg: 106.5, Min: 104.6, Max: 107.9, Diff: 3.3] [Termination (ms): 0.0 0.0 0.0 0.0 Avg: 0.0, Min: 0.0, Max: 0.0, Diff: 0.0] [Termination Attempts : 1 4 4 6 Sum: 15, Avg: 3, Min: 1, Max: 6, Diff: 5] [GC Worker End (ms): 679.1 679.1 679.1 679.1 Avg: 679.1, Min: 679.1, Max: 679.1, Diff: 0.1] [GC Worker (ms): 156.9 157.0 156.9 156.9 Avg: 156.9, Min: 156.9, Max: 157.0, Diff: 0.1] [GC Worker Other (ms): 0.3 0.3 0.3 0.3 Avg: 0.3, Min: 0.3, Max: 0.3, Diff: 0.0] [Clear CT: 0.1 ms] [Other: 1.5 ms] [Choose CSet: 0.0 ms] [Ref Proc: 0.3 ms] [Ref Enq: 0.0 ms] [Free CSet: 0.3 ms] [Eden: 12M(12M)->0B(10M) Survivors: 0B->2048K Heap: 13M(64M)->9739K(64M)] [Times: user=0.59 sys=0.02, real=0.16 secs] This is the typical log of an Evacuation Pause (G1 collection) in which live objects are copied from one set of regions (young OR young+old) to another set. It is a stop-the-world activity and all the application threads are stopped at a safepoint during this time. This pause is made up of several sub-tasks indicated by the indentation in the log entries. Here's is the top most line that gets printed for the Evacuation Pause. 0.522: [GC pause (young), 0.15877971 secs] This is the highest level information telling us that it is an Evacuation Pause that started at 0.522 secs from the start of the process, in which all the regions being evacuated are Young i.e. Eden and Survivor regions. This collection took 0.15877971 secs to finish. Evacuation Pauses can be mixed as well. In which case the set of regions selected include all of the young regions as well as some old regions. 1.730: [GC pause (mixed), 0.32714353 secs] Let's take a look at all the sub-tasks performed in this Evacuation Pause. [Parallel Time: 157.1 ms] Parallel Time is the total elapsed time spent by all the parallel GC worker threads. The following lines correspond to the parallel tasks performed by these worker threads in this total parallel time, which in this case is 157.1 ms. [GC Worker Start (ms): 522.1 522.2 522.2 522.2Avg: 522.2, Min: 522.1, Max: 522.2, Diff: 0.1] The first line tells us the start time of each of the worker thread in milliseconds. The start times are ordered with respect to the worker thread ids – thread 0 started at 522.1ms and thread 1 started at 522.2ms from the start of the process. The second line tells the Avg, Min, Max and Diff of the start times of all of the worker threads. [Ext Root Scanning (ms): 1.6 1.5 1.6 1.9 Avg: 1.7, Min: 1.5, Max: 1.9, Diff: 0.4] This gives us the time spent by each worker thread scanning the roots (globals, registers, thread stacks and VM data structures). Here, thread 0 took 1.6ms to perform the root scanning task and thread 1 took 1.5 ms. The second line clearly shows the Avg, Min, Max and Diff of the times spent by all the worker threads. [Update RS (ms): 38.7 38.8 50.6 37.3 Avg: 41.3, Min: 37.3, Max: 50.6, Diff: 13.3] Update RS gives us the time each thread spent in updating the Remembered Sets. Remembered Sets are the data structures that keep track of the references that point into a heap region. Mutator threads keep changing the object graph and thus the references that point into a particular region. We keep track of these changes in buffers called Update Buffers. The Update RS sub-task processes the update buffers that were not able to be processed concurrently, and updates the corresponding remembered sets of all regions. [Processed Buffers : 2 2 3 2Sum: 9, Avg: 2, Min: 2, Max: 3, Diff: 1] This tells us the number of Update Buffers (mentioned above) processed by each worker thread. [Scan RS (ms): 9.9 9.7 0.0 9.7 Avg: 7.3, Min: 0.0, Max: 9.9, Diff: 9.9] These are the times each worker thread had spent in scanning the Remembered Sets. Remembered Set of a region contains cards that correspond to the references pointing into that region. This phase scans those cards looking for the references pointing into all the regions of the collection set. [Object Copy (ms): 106.7 106.8 104.6 107.9 Avg: 106.5, Min: 104.6, Max: 107.9, Diff: 3.3] These are the times spent by each worker thread copying live objects from the regions in the Collection Set to the other regions. [Termination (ms): 0.0 0.0 0.0 0.0 Avg: 0.0, Min: 0.0, Max: 0.0, Diff: 0.0] Termination time is the time spent by the worker thread offering to terminate. But before terminating, it checks the work queues of other threads and if there are still object references in other work queues, it tries to steal object references, and if it succeeds in stealing a reference, it processes that and offers to terminate again. [Termination Attempts : 1 4 4 6 Sum: 15, Avg: 3, Min: 1, Max: 6, Diff: 5] This gives the number of times each thread has offered to terminate. [GC Worker End (ms): 679.1 679.1 679.1 679.1 Avg: 679.1, Min: 679.1, Max: 679.1, Diff: 0.1] These are the times in milliseconds at which each worker thread stopped. [GC Worker (ms): 156.9 157.0 156.9 156.9 Avg: 156.9, Min: 156.9, Max: 157.0, Diff: 0.1] These are the total lifetimes of each worker thread. [GC Worker Other (ms): 0.3 0.3 0.3 0.3Avg: 0.3, Min: 0.3, Max: 0.3, Diff: 0.0] These are the times that each worker thread spent in performing some other tasks that we have not accounted above for the total Parallel Time. [Clear CT: 0.1 ms] This is the time spent in clearing the Card Table. This task is performed in serial mode. [Other: 1.5 ms] Time spent in the some other tasks listed below. The following sub-tasks (which individually may be parallelized) are performed serially. [Choose CSet: 0.0 ms] Time spent in selecting the regions for the Collection Set. [Ref Proc: 0.3 ms] Total time spent in processing Reference objects. [Ref Enq: 0.0 ms] Time spent in enqueuing references to the ReferenceQueues. [Free CSet: 0.3 ms] Time spent in freeing the collection set data structure. [Eden: 12M(12M)->0B(13M) Survivors: 0B->2048K Heap: 14M(64M)->9739K(64M)] This line gives the details on the heap size changes with the Evacuation Pause. This shows that Eden had the occupancy of 12M and its capacity was also 12M before the collection. After the collection, its occupancy got reduced to 0 since everything is evacuated/promoted from Eden during a collection, and its target size grew to 13M. The new Eden capacity of 13M is not reserved at this point. This value is the target size of the Eden. Regions are added to Eden as the demand is made and when the added regions reach to the target size, we start the next collection. Similarly, Survivors had the occupancy of 0 bytes and it grew to 2048K after the collection. The total heap occupancy and capacity was 14M and 64M receptively before the collection and it became 9739K and 64M after the collection. Apart from the evacuation pauses, G1 also performs concurrent-marking to build the live data information of regions. 1.416: [GC pause (young) (initial-mark), 0.62417980 secs] ….... 2.042: [GC concurrent-root-region-scan-start] 2.067: [GC concurrent-root-region-scan-end, 0.0251507] 2.068: [GC concurrent-mark-start] 3.198: [GC concurrent-mark-reset-for-overflow] 4.053: [GC concurrent-mark-end, 1.9849672 sec] 4.055: [GC remark 4.055: [GC ref-proc, 0.0000254 secs], 0.0030184 secs] [Times: user=0.00 sys=0.00, real=0.00 secs] 4.088: [GC cleanup 117M->106M(138M), 0.0015198 secs] [Times: user=0.00 sys=0.00, real=0.00 secs] 4.090: [GC concurrent-cleanup-start] 4.091: [GC concurrent-cleanup-end, 0.0002721] The first phase of a marking cycle is Initial Marking where all the objects directly reachable from the roots are marked and this phase is piggy-backed on a fully young Evacuation Pause. 2.042: [GC concurrent-root-region-scan-start] This marks the start of a concurrent phase that scans the set of root-regions which are directly reachable from the survivors of the initial marking phase. 2.067: [GC concurrent-root-region-scan-end, 0.0251507] End of the concurrent root region scan phase and it lasted for 0.0251507 seconds. 2.068: [GC concurrent-mark-start] Start of the concurrent marking at 2.068 secs from the start of the process. 3.198: [GC concurrent-mark-reset-for-overflow] This indicates that the global marking stack had became full and there was an overflow of the stack. Concurrent marking detected this overflow and had to reset the data structures to start the marking again. 4.053: [GC concurrent-mark-end, 1.9849672 sec] End of the concurrent marking phase and it lasted for 1.9849672 seconds. 4.055: [GC remark 4.055: [GC ref-proc, 0.0000254 secs], 0.0030184 secs] This corresponds to the remark phase which is a stop-the-world phase. It completes the left over marking work (SATB buffers processing) from the previous phase. In this case, this phase took 0.0030184 secs and out of which 0.0000254 secs were spent on Reference processing. 4.088: [GC cleanup 117M->106M(138M), 0.0015198 secs] Cleanup phase which is again a stop-the-world phase. It goes through the marking information of all the regions, computes the live data information of each region, resets the marking data structures and sorts the regions according to their gc-efficiency. In this example, the total heap size is 138M and after the live data counting it was found that the total live data size dropped down from 117M to 106M. 4.090: [GC concurrent-cleanup-start] This concurrent cleanup phase frees up the regions that were found to be empty (didn't contain any live data) during the previous stop-the-world phase. 4.091: [GC concurrent-cleanup-end, 0.0002721] Concurrent cleanup phase took 0.0002721 secs to free up the empty regions. Option -XX:G1PrintRegionLivenessInfo Now, let's look at the output generated with the flag G1PrintRegionLivenessInfo. This is a diagnostic option and gets enabled with -XX:+UnlockDiagnosticVMOptions. G1PrintRegionLivenessInfo prints the live data information of each region during the Cleanup phase of the concurrent-marking cycle. 26.896: [GC cleanup ### PHASE Post-Marking @ 26.896### HEAP committed: 0x02e00000-0x0fe00000 reserved: 0x02e00000-0x12e00000 region-size: 1048576 Cleanup phase of the concurrent-marking cycle started at 26.896 secs from the start of the process and this live data information is being printed after the marking phase. Committed G1 heap ranges from 0x02e00000 to 0x0fe00000 and the total G1 heap reserved by JVM is from 0x02e00000 to 0x12e00000. Each region in the G1 heap is of size 1048576 bytes. ### type address-range used prev-live next-live gc-eff### (bytes) (bytes) (bytes) (bytes/ms) This is the header of the output that tells us about the type of the region, address-range of the region, used space in the region, live bytes in the region with respect to the previous marking cycle, live bytes in the region with respect to the current marking cycle and the GC efficiency of that region. ### FREE 0x02e00000-0x02f00000 0 0 0 0.0 This is a Free region. ### OLD 0x02f00000-0x03000000 1048576 1038592 1038592 0.0 Old region with address-range from 0x02f00000 to 0x03000000. Total used space in the region is 1048576 bytes, live bytes as per the previous marking cycle are 1038592 and live bytes with respect to the current marking cycle are also 1038592. The GC efficiency has been computed as 0. ### EDEN 0x03400000-0x03500000 20992 20992 20992 0.0 This is an Eden region. ### HUMS 0x0ae00000-0x0af00000 1048576 1048576 1048576 0.0### HUMC 0x0af00000-0x0b000000 1048576 1048576 1048576 0.0### HUMC 0x0b000000-0x0b100000 1048576 1048576 1048576 0.0### HUMC 0x0b100000-0x0b200000 1048576 1048576 1048576 0.0### HUMC 0x0b200000-0x0b300000 1048576 1048576 1048576 0.0### HUMC 0x0b300000-0x0b400000 1048576 1048576 1048576 0.0### HUMC 0x0b400000-0x0b500000 1001480 1001480 1001480 0.0 These are the continuous set of regions called Humongous regions for storing a large object. HUMS (Humongous starts) marks the start of the set of humongous regions and HUMC (Humongous continues) tags the subsequent regions of the humongous regions set. ### SURV 0x09300000-0x09400000 16384 16384 16384 0.0 This is a Survivor region. ### SUMMARY capacity: 208.00 MB used: 150.16 MB / 72.19 % prev-live: 149.78 MB / 72.01 % next-live: 142.82 MB / 68.66 % At the end, a summary is printed listing the capacity, the used space and the change in the liveness after the completion of concurrent marking. In this case, G1 heap capacity is 208MB, total used space is 150.16MB which is 72.19% of the total heap size, live data in the previous marking was 149.78MB which was 72.01% of the total heap size and the live data as per the current marking is 142.82MB which is 68.66% of the total heap size. Option -XX:+G1PrintHeapRegions G1PrintHeapRegions option logs the regions related events when regions are committed, allocated into or are reclaimed. COMMIT/UNCOMMIT events G1HR COMMIT [0x6e900000,0x6ea00000]G1HR COMMIT [0x6ea00000,0x6eb00000] Here, the heap is being initialized or expanded and the region (with bottom: 0x6eb00000 and end: 0x6ec00000) is being freshly committed. COMMIT events are always generated in order i.e. the next COMMIT event will always be for the uncommitted region with the lowest address. G1HR UNCOMMIT [0x72700000,0x72800000]G1HR UNCOMMIT [0x72600000,0x72700000] Opposite to COMMIT. The heap got shrunk at the end of a Full GC and the regions are being uncommitted. Like COMMIT, UNCOMMIT events are also generated in order i.e. the next UNCOMMIT event will always be for the committed region with the highest address. GC Cycle events G1HR #StartGC 7G1HR CSET 0x6e900000G1HR REUSE 0x70500000G1HR ALLOC(Old) 0x6f800000G1HR RETIRE 0x6f800000 0x6f821b20G1HR #EndGC 7 This shows start and end of an Evacuation pause. This event is followed by a GC counter tracking both evacuation pauses and Full GCs. Here, this is the 7th GC since the start of the process. G1HR #StartFullGC 17G1HR UNCOMMIT [0x6ed00000,0x6ee00000]G1HR POST-COMPACTION(Old) 0x6e800000 0x6e854f58G1HR #EndFullGC 17 Shows start and end of a Full GC. This event is also followed by the same GC counter as above. This is the 17th GC since the start of the process. ALLOC events G1HR ALLOC(Eden) 0x6e800000 The region with bottom 0x6e800000 just started being used for allocation. In this case it is an Eden region and allocated into by a mutator thread. G1HR ALLOC(StartsH) 0x6ec00000 0x6ed00000G1HR ALLOC(ContinuesH) 0x6ed00000 0x6e000000 Regions being used for the allocation of Humongous object. The object spans over two regions. G1HR ALLOC(SingleH) 0x6f900000 0x6f9eb010 Single region being used for the allocation of Humongous object. G1HR COMMIT [0x6ee00000,0x6ef00000]G1HR COMMIT [0x6ef00000,0x6f000000]G1HR COMMIT [0x6f000000,0x6f100000]G1HR COMMIT [0x6f100000,0x6f200000]G1HR ALLOC(StartsH) 0x6ee00000 0x6ef00000G1HR ALLOC(ContinuesH) 0x6ef00000 0x6f000000G1HR ALLOC(ContinuesH) 0x6f000000 0x6f100000G1HR ALLOC(ContinuesH) 0x6f100000 0x6f102010 Here, Humongous object allocation request could not be satisfied by the free committed regions that existed in the heap, so the heap needed to be expanded. Thus new regions are committed and then allocated into for the Humongous object. G1HR ALLOC(Old) 0x6f800000 Old region started being used for allocation during GC. G1HR ALLOC(Survivor) 0x6fa00000 Region being used for copying old objects into during a GC. Note that Eden and Humongous ALLOC events are generated outside the GC boundaries and Old and Survivor ALLOC events are generated inside the GC boundaries. Other Events G1HR RETIRE 0x6e800000 0x6e87bd98 Retire and stop using the region having bottom 0x6e800000 and top 0x6e87bd98 for allocation. Note that most regions are full when they are retired and we omit those events to reduce the output volume. A region is retired when another region of the same type is allocated or we reach the start or end of a GC(depending on the region). So for Eden regions: For example: 1. ALLOC(Eden) Foo2. ALLOC(Eden) Bar3. StartGC At point 2, Foo has just been retired and it was full. At point 3, Bar was retired and it was full. If they were not full when they were retired, we will have a RETIRE event: 1. ALLOC(Eden) Foo2. RETIRE Foo top3. ALLOC(Eden) Bar4. StartGC G1HR CSET 0x6e900000 Region (bottom: 0x6e900000) is selected for the Collection Set. The region might have been selected for the collection set earlier (i.e. when it was allocated). However, we generate the CSET events for all regions in the CSet at the start of a GC to make sure there's no confusion about which regions are part of the CSet. G1HR POST-COMPACTION(Old) 0x6e800000 0x6e839858 POST-COMPACTION event is generated for each non-empty region in the heap after a full compaction. A full compaction moves objects around, so we don't know what the resulting shape of the heap is (which regions were written to, which were emptied, etc.). To deal with this, we generate a POST-COMPACTION event for each non-empty region with its type (old/humongous) and the heap boundaries. At this point we should only have Old and Humongous regions, as we have collapsed the young generation, so we should not have eden and survivors. POST-COMPACTION events are generated within the Full GC boundary. G1HR CLEANUP 0x6f400000G1HR CLEANUP 0x6f300000G1HR CLEANUP 0x6f200000 These regions were found empty after remark phase of Concurrent Marking and are reclaimed shortly afterwards. G1HR #StartGC 5G1HR CSET 0x6f400000G1HR CSET 0x6e900000G1HR REUSE 0x6f800000 At the end of a GC we retire the old region we are allocating into. Given that its not full, we will carry on allocating into it during the next GC. This is what REUSE means. In the above case 0x6f800000 should have been the last region with an ALLOC(Old) event during the previous GC and should have been retired before the end of the previous GC. G1HR ALLOC-FORCE(Eden) 0x6f800000 A specialization of ALLOC which indicates that we have reached the max desired number of the particular region type (in this case: Eden), but we decided to allocate one more. Currently it's only used for Eden regions when we extend the young generation because we cannot do a GC as the GC-Locker is active. G1HR EVAC-FAILURE 0x6f800000 During a GC, we have failed to evacuate an object from the given region as the heap is full and there is no space left to copy the object. This event is generated within GC boundaries and exactly once for each region from which we failed to evacuate objects. When Heap Regions are reclaimed ? It is also worth mentioning when the heap regions in the G1 heap are reclaimed. All regions that are in the CSet (the ones that appear in CSET events) are reclaimed at the end of a GC. The exception to that are regions with EVAC-FAILURE events. All regions with CLEANUP events are reclaimed. After a Full GC some regions get reclaimed (the ones from which we moved the objects out). But that is not shown explicitly, instead the non-empty regions that are left in the heap are printed out with the POST-COMPACTION events.

  Read the article

• Ubuntu tweak and Mozilla (firefox and thunderbird) cache

  - by Avatar Parto

  I usually use Ubuntu tweak to do cleanup jobs on my PC. This includes apt and program cached data and old kernels. This goes alright for most programs except Mozilla based application - Firefox and Thunderbird. Ubuntu tweak doesn't seem to know where their cache folders are and always returns 'zero packages can be cleaned' even when the cache folder is full. Check screenshot below: I am looking for a way to clean up ALL my cache data and unneeded packages at one point. If someone knows how to change the ubuntu tweak cache folders for Firefox and Thunderbird, that would be perfect. I tried bleachbit last but it crashed my PC to a point I had to re-install Ubuntu. I am using Ubuntu tweak 0.8.6 on Ubuntu 13.04. Thanxs.

  Read the article

• What Did You Do? is a Bad Question

  - by Ajarn Mark Caldwell

  Brian Moran (blog | Twitter) did a great presentation today for the PASS Professional Development Virtual Chapter on The Art of Questions.  One of the points that Brian made was that there are good questions and bad (or at least not-as-good) questions.  Good questions tend to open-up the conversation and engender positive reactions (perhaps even trust and respect) between the participants; and bad questions tend to close-down a conversation either through the narrow list of possible responses (e.g. strictly Yes/No) or through the negative reactions they can produce.  And this explains why I so frequently had problems troubleshooting real-time problems with users in the past.  I’ll explain that in more detail below, but before we go on, let me recommend that you watch the recording of Brian’s presentation to learn why the question Why is often problematic in the U.S. and yet we so often resort to it. For a short portion (3 years) of my career, I taught basic computer skills and Office applications in an adult vocational school, and this gave me ample opportunity to do live troubleshooting of user challenges with computers.  And like many people who ended up in computer related jobs, I also have had numerous times where I was called upon by less computer-savvy individuals to help them with some challenge they were having, whether it was part of my job or not.  One of the things that I noticed, especially during my time as a teacher, was that when I was helping somebody, typically the first question I would ask them was, “What did you do?”  This seemed to me like a good way to start my detective work trying to figure out what happened, what went wrong, how to fix it, and how to help the person avoid it again in the future.  I always asked it in a polite tone of voice as I was just trying to gather the facts before diving in deeper.  However; 99.999% of the time, I always got the same answer, “Nothing!”  For a long time this frustrated me because (remember I’m in detective mode at that point) I knew it could not possibly be true.  They HAD to have done SOMETHING…just tell me what were the last actions you took before this problem presented itself.  But no, they always stuck with “Nothing”.  At which point, with frustration growing, and not a little bit of disdain for their lack of helpfulness, I would usually ask them to move aside while I took over their machine and got them out of whatever they had gotten themselves into.  After a while I just grew used to the fact that this was the answer I would usually receive, but I always kept asking because for the .001% of the people who would actually tell me, I could then help them understand what went wrong and how to avoid it in the future. Now, after hearing Brian’s talk, I understand what the problem was.  Even though I meant to just be in an information gathering mode, the words I was using, “What did YOU do?” have such a strong negative connotation that people would instinctively go into defense-mode and stop sharing information that might make them look bad.  Many of them probably were not even consciously aware that they had gone on the defensive, but the self-preservation instinct, especially self-preservation of the ego, is so strong that people would end up there without even realizing it. So, if “What did you do” is a bad question, what would have been better?  Well, one suggestion that Brian makes in his talk is something along the lines of, “Can you tell me what led up to this?” or “what was happening on the computer right before this came up?”  It’s subtle, but the point is to take the focus off of the person and their behavior; instead depersonalizing it and talk about events from more of a 3rd-party observer point of view.  With this approach, people will be more likely to talk about what the computer did and what they did in response to it without feeling the interrogation spotlight is on them.  They are also more likely to mention other events that occurred around the same time that may or may not be related, but which could certainly help you troubleshoot a larger problem if it is not just user actions.  And that is the ultimate goal of your asking the questions.  So yes, it does matter how you ask the question; and there are such things as good questions and bad questions.  Excellent topic Brian!  Thanks for getting the thinking gears churning! (Cross-posted to the Professional Development Virtual Chapter blog.)

  Read the article

• Which comes first DNS or name servers?

  - by Thomas Clayson

  Which comes first? DNS or nameservers? Its just I'm editing a domain and want to point it to different hosting servers. Now, normally I'd just set the nameservers to the new hosting nameservers, but this doesn't seem to be working (the control panels not brilliant - doesn't say "accepted" or "success" - and whois searches are turning up nothing - although I should leave it a while longer). Anyway - the point is, in the DNS records there are two A records (one for " " and one for "www") which have an ip address associated with them. So this is what I don't understand. If I change the nameservers, do I have to remove the DNS records? Will name servers "overwrite" a DNS record? Or vice versa? Thank you.

  Read the article

• Typing commands into a terminal always returns "-bash: /usr/bin/python: is a directory"

  - by Artur Sapek

  I think I messed something up on my Ubuntu server while trying to upgrade to Python 2.7.2. Every time I type in a command that doesn't have a response, the default from bash is this: -bash: /usr/bin/python: is a directory Just like it would say if I typed the name of a directory. But this happens every time I enter a command that doesn't do anything. artur@SERVER:~$ dslkfjdsklfdshjk -bash: /usr/bin/python: is a directory I remember messing with the update-alternatives to point at python at some point, perhaps that could be it? Any inklings as to why this is happening? Related to this problem is also the fact that when I try using easy_install it tells me -bash: /usr/bin/easy_install: /usr/bin/python: bad interpeter: Permission denied /etc/fstab/ is set to exec. I've read that could fix the second problem but it hasn't.

  Read the article

• DNS add-on domain setup and redirect

  - by brian

  I have several domains which I'd like to point to another (I'll call it foo.com). A couple of things aren't entirely clear to me. First, the DNS. I'm using Kloxo/HyperVM. Do I need to create separate DNS entries for each domain? Or do I just create separate CNAME or other records under foo.com? I thought it was the latter but when I click on "Add CNAME" I'm prompted to fill in the subdomain portion of foo.com. The nameservers have already been set to point to my VPS. For the redirect, would the following be appropriate within the vhost conf for foo.com? ServerName www.foo.com ServerAlias foo.com foo.net foo.org bar.com bar.net bar.org RewriteCond %{HTTP_HOST} ^foo.com [NC] RewriteCond %{HTTP_HOST} *foo.net [NC,OR] RewriteCond %{HTTP_HOST} *foo.org [NC,OR] RewriteCond %{HTTP_HOST} *bar.com [NC,OR] RewriteCond %{HTTP_HOST} *bar.net [NC,OR] RewriteCond %{HTTP_HOST} *bar.org [NC] RewriteRule ^(.*)$ http://www.foo.com/$1 [R=301,NC] (The first condition is just to force the "www" part)

  Read the article

• FBX 3ds max export, bad vertices

  - by instancedName

  I need to import model in OpenGL via Fbx SdK, and for testing purposes I created a simple box centered in the (0, 0, 0), length 3, in 3ds max. Here's the image: But when i exported it, and imported in the OpenGL it wasn't in the center. Then I exported it in ASCII format, and opened the file in Notepad, and really Z coordinates were 0, and 3. When I converted model to editable mesh and checked every vertex in 3ds max it had expected (+-1.5, +-1.5, +-1.5) coordinates. Can anyone help me with this one? I'm really stuck. I tried to change whole bunch of parameters in 3ds max export, but every time it changes Z koordinate.

  Read the article

• Mark Hurd on Oracle's Strategy to Be the Best

  - by Tuula Fai

  Mark Hurd, President of Oracle, energized a packed audience this Monday morning at OpenWorld with his keynote outlining Oracle’s four-pillar strategy: Be the leader at every level of the technology stack—applications, middleware, database, operating system, virtual machine, servers, and storage Vertically integrate these levels into differentiated solutions Offer Fusion, the next generation of applications, which are modular and can run in the cloud, on-premise, or both (hybrid) Deliver this technology portfolio through industry lenses to help Oracle customers solve their problems while innovating and becoming more efficient. Hurd’s message resonated throughout Monday’s Customer Experience (CX) sessions as we learned about Oracle’s investment in integrating its best-of-breed CX solutions to deliver an end-to-end suite that addresses every part of the customer lifecycle. For example, in the area of customer service, Oracle is developing enhancements to help contact center agents: Better understand customer needs through social listening tools that are integrated with knowledge management Empower themselves with internal collaboration and mobility tools Adapt to customer needs by engaging them through chat during a service or commerce interaction so they can deliver a great customer experience while transforming from a cost- into a profit center.

  Read the article

• You Couldn’t Write it !! ( part 1 )

  - by GrumpyOldDBA

  This post was inspired by a developer and I think illustrates the gulf that can sometimes exist between IT and the business. I should point out that this post is the diplomatic version! Initially I was sent a simple search for a person with a question about why the query plan showed a sort when there was no sort in the query and why did the sort show it was 40% of the query. ( The point about the sort belongs to another post some time. ) Easy answer to the duration was that this was a leading wild...(read more)

  Read the article

• How to keep menu in a single place without using frames

  - by TJ Ellis

  This is probably a duplicate, but I can't find the answer anywhere (maybe I'm searching for the wrong thing?) and so I'm going to go ahead and ask. What is the accepted standard practice for creating a menu that is stored in a single file, but is included on every page across a site? Back in the day, one used frames, but this seems to be taboo now. I can get things layed out just the way I want, but copy/pasting across every page is a pain. I have seen php-based solutions, but my cheap-o free hosting doesn't support php (which is admittedly a pain, but it's a fairly simple webpage...). Any ideas for doing this that does not require server-side scripting?

  Read the article

• No VB6 to VS2010 direct upgrade path

  - by Chris Williams

  From the "is this really news?" department... From looking at the currently available versions of 2010, there is no direct upgrade path from VB6 to VS2010. Anyone still using VB6 and wishing to upgrade to VS2010 has two options:  Use the upgrade tool from an earlier version of VS (like 2005 or 2008) and then run the upgrade in VS2010 to get the rest of the way... or rewrite your code. I'll leave it as an exercise to the reader which is the better option. I'd like to take a moment to point out the obvious: A) If you're still using VB6 at this point, you probably don't care about VS2010 compatibility. B) Running your code through 2 upgrade wizards isn't going to result in anything resembling best practices. C) Bemoaning the lack of support in 2010 for a 12 year old version of an extinct programming language helps nobody. This public service announcement is brought to you by the letter C. Thank you.

  Read the article

• SQL SERVER – TechEd India 2012 – Content, Speakers and a Lots of Fun

  - by pinaldave

  TechEd is one event which every developers and IT professionals are looking forward to attend. It is opportunity of life time and no matter how many time one gets chance to engage with it, it is never enough. I still remember every single moment of every TechEd I have attended so far. We are less than 100 hours away from TechEd India 2012 event.This event is the one must attend event for every Technology Enthusiast. Fourth time in the row I am going to attend this event and I am equally excited as the first time of the event. There are going to be two very solid SQL Server track this time and I will be attending end of the end both the tracks. Here is my view on each of the 10 sessions. Each session is carefully crafted and leading exeprts from industry will present it. Day 1, March 21, 2012 T-SQL Rediscovered with SQL Server 2012 – This session is going to bring some of the lesser known enhancements that were brought with SQL Server 2012. When I learned that Jacob Sebastian is going to do this session my reaction to this is DEMO, DEMO and DEMO! Jacob spends hours and hours of his time preparing his session and this will be one of those session that I am confident will be delivered over and over through out the next many events. Catapult your data with SQL Server 2012 Integration Services – Praveen is expert story teller and one of the wizard when it is about SQL Server and business intelligence. He is surely going to mesmerize you with some interesting insights on SSIS performance too. Processing Big Data with SQL Server 2012 and Hadoop – There are three sessions on Big Data at TechEd India 2012. Stephen is going to deliver one of the session. Watching Stephen present is always joy and quite entertaining. He shares knowledge with his typical humor which captures ones attention. I wrote about what is BIG DATA in a blog post. SQL Server Misconceptions and Resolutions – I will be presenting this Session along with Vinod Kumar. READ MORE HERE. Securing with ContainedDB in SQL Server 2012 – Pranab is expert when it is about SQL Server and Security. I have seen him presenting and he is indeed very pleasant to watch. A dry subject like security, he makes it much lively. A Contained Database is a database which contains all the necessary settings and metadata, making database easily portable to another server. This database will contain all the necessary details and will not have to depend on any server where it is installed for anything. You can take this database and move it to another server without having any worries. Day 3, March 23, 2012 Peeling SQL Server like an Onion: Internals Demystified – Vinod Kumar has been writing about this extensively on his other blog post. In recent conversation he suggested that he will be creating very exclusive content for this presentation. I know Vinod for long time and have worked with him along many community activities. I am going to pay special attention to the details. I know Vinod has few give-away planned now for attending the session now only if he shares with us. Speed Up – Parallel Processes and unparalleled Performance – Performance tuning is my favorite subject. I will be discussing effect of parallelism on performance in this session. Here me out, there will be lots of quiz questions during this session and if you get the answers correct – you can win some really cool goodies – I Promise! READ MORE HERE. Keep your database available – AlwaysOn – Balmukund is like an army man. He is always ready to show and prove that he has coolest toys in terms of SQL Server and he knows how to keep them running AlwaysON. Availability groups, Listener, Clustering, Failover, Read-Only replica etc all will be demo’ed in this session. This is really heavy but very interesting content not to be missed. Lesser known facts about SQL Server Backup and Restore – Amit Banerjee – this name is known internationally for solving SQL Server problems in 140 characters. He has already blogged about this and this topic is going to be interesting. A successful restore strategy for applications is as good as their last good known backup. I have few difficult questions to ask to Amit and I am very sure that his unique style will entertain people. By the way, his one of the slide may give few in audience a funny heart attack. Top 5 reasons why you want SQL Server 2012 BI – Praveen plans to take a tour of some of the BI enhancements introduced in the new version. Business Insights with SQL Server is a critical building block and this version of SQL Server is no exception. For the matter of the fact, when I saw the demos he was going to show during this session, I felt like that I wish I can set up all of this on my machine. If you miss this session – you will miss one of the most informative session of the day. Also TechEd India 2012 has a Live streaming of some content and this can be watched here. The TechEd Team is planning to have some really good exclusive content in this channel as well. If you spot me, just do not hesitate to come by me and introduce yourself, I want to remember you! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Generate DROP statements for all extended properties

  - by jamiet

  This evening I have been attempting to migrate an existing on-premise database to SQL Azure using the wizard that is built-in to SQL Server Management Studio (SSMS). When I did so I received the following error: The following objects are not supported = [MS_Description] = Extended Property Evidently databases containing extended properties can not be migrated using this particular wizard so I set about removing all of the extended properties – unfortunately there were over a thousand of them so I needed a better way than simply deleting each and every one of them manually. I found a couple of resources online that went some way toward this: Drop all extended properties in a MSSQL database by Angelo Hongens Modifying and deleting extended properties by Adam Aspin Unfortunately neither provided a script that exactly suited my needs. Angelo’s covered extended properties on tables and columns however I had other objects that had extended properties on them. Adam’s looked more complete but when I ran it I got an error: Msg 468, Level 16, State 9, Line 78 Cannot resolve the collation conflict between "Latin1_General_100_CS_AS" and "Latin1_General_CI_AS" in the equal to operation. So, both great resources but I wasn’t able to use either on their own to get rid of all of my extended properties. Hence, I combined the excellent work that Angelo and Adam had provided in order to manufacture my own script which did successfully manage to generate calls to sp_dropextendedproperty for all of my extended properties. If you think you might be able to make use of such a script then feel free to download it from https://skydrive.live.com/redir.aspx?cid=550f681dad532637&resid=550F681DAD532637!16707&parid=550F681DAD532637!16706&authkey=!APxPIQCatzC7BQ8. This script will remove extended properties on tables, columns, check constraints, default constraints, views, sprocs, foreign keys, primary keys, table triggers, UDF parameters, sproc parameters, databases, schemas, database files and filegroups. If you have any object types with extended properties on them that are not in that list then consult Adam’s aforementioned article – it should prove very useful. I repeat here the message that I have placed at the top of the script: /* This script will generate calls to sp_dropextendedproperty for every extended property that exists in your database. Actually, a caveat: I don't promise that it will catch each and every extended property that exists, but I'm confident it will catch most of them! It is based on this: http://blog.hongens.nl/2010/02/25/drop-all-extended-properties-in-a-mssql-database/ by Angelo Hongens. Also had lots of help from this: http://www.sqlservercentral.com/articles/Metadata/72609/ by Adam Aspin Adam actually provides a script at that link to do something very similar but when I ran it I got an error: Msg 468, Level 16, State 9, Line 78 Cannot resolve the collation conflict between "Latin1_General_100_CS_AS" and "Latin1_General_CI_AS" in the equal to operation. So I put together this version instead. Use at your own risk. Jamie Thomson 2012-03-25 */ Hope this is useful to someone! @Jamiet

  Read the article

• Introducing Glimpse – Firebug for your server

  - by Neil Davidson

  Here at Red Gate, we spend every waking hour trying to wow .NET and SQL developers with great products.  Every so often, though, we find something out in the wild which knocks our socks off by taking “ingeniously simple” to a whole new level.  That’s what a little community led by developers Nik Molnar and Anthony van der Hoorn has done with the open source tool Glimpse. Glimpse describes itself as ‘Firebug for the server.’  You drop the NuGet package into your ASP.NET project, and then — like magic* — your web pages will bare every detail of their execution.  Even by our high standards, it was trivial to get running: if you can use NuGet, you’re already there. You get all that lovely detail without changing any code. Our feelings go beyond respect for the developers who designed and wrote Glimpse; we’re thrilled that Nik and Anthony have come to work for Red Gate full-time. They’re going to stay in control of the project and keep doing open source development work on Glimpse.  In the medium term, we’re hoping to make paid-for products which plug into the free open source framework, especially in areas like performance profiling where we already have some deep technology.  First, though, Glimpse needs to get from beta to a v1. Given the breakneck pace of new development, this should only be a month or so away. Supporting an open source project is a first for Red Gate, so we’re going to be working with Nik and Anthony, with the Glimpse community and even with other vendors to figure out what ‘great’ looks like from the a user perspective.  Only one thing is certain: this technology deserves a wider audience than the 40,000 people who have already downloaded it, so please have a look and tell us what you think. You can hear more about what the Glimpse developers think on the Glimpse blog, and there are plenty more technical facts over at our product manager’s blog. If you have any questions or queries, please tweet with the #glimpse hashtag or contact the Glimpse team directly on [email protected]. [*That’s ”magic” in the Arthur C. Clarke “sufficiently advanced technology” sense, of course] Neil Davidson co-founder and Joint CEO Red Gate Software http://twitter.com/neildavidson    

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >