failed installation - Page 203

Cannot login SQL Server after changing machine name

- by Ucodia

After installing and setting up new machines in a domain, we decided to rename one of them which had a SQL Server instance installed. So I changed the hostname, everything went fine regarding the domain but now, the server is logging a approximatively 2 SQL Server errors every 5 minutes and I cannot connect to the instance localy or from anywhere within the domain. Here is the error from the event log: SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure. The logon attempt failed [CLIENT: x.x.x.x] Concerning the instance, everything is started and restarted without any extra error.

Read the article

How can I install Java SDK on Windows 7 without messing up the system?

- by robert_d

I've installed Java SE Development Kit 1.6.0_31 32bit on Windows 7 64bit system, but this installation messed up my system, e.g. when I start Google Chrome I get error Your preferences can not be read Visual Studio 2010 after launching shows error that The Application Data folder for Visual Studio could not be created The shortcut to the Downloads folder in Windows Explorer no longer works. BTW this is pretty clean install, on other occasions after Java installation I had problems like this http://forums.techguy.org/windows-vista/808717-solved-c-windows-system32-config.html Is there a way to install Java SDK without messing up Windows 7? Or maybe this mess can be cleaned up after installation of Java, but how?

Read the article

Android: ActivityThread.performLaunchActivity error

- by fordays

Hi, I'm getting an ActivityThread.performLaunchActivity(ActivityThread$ActivityRecord,Intent) error each time I boot up my program in the debugger. The program won't even start up! Any help would be greatly appreciated! I'm very new to this environment. Let me know if you need anymore information/code to help me out. Here is my logcat: 06-09 11:16:26.848: ERROR/vold(27): Error opening switch name path '/sys/class/switch/test2' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error bootstrapping switch '/sys/class/switch/test2' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error opening switch name path '/sys/class/switch/test' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error bootstrapping switch '/sys/class/switch/test' (No such file or directory) 06-09 11:16:37.887: ERROR/MemoryHeapBase(53): error opening /dev/pmem: No such file or directory 06-09 11:16:37.887: ERROR/SurfaceFlinger(53): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake 06-09 11:16:37.927: ERROR/libEGL(53): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 06-09 11:16:38.407: ERROR/libEGL(64): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 06-09 11:16:41.358: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/usb/online' 06-09 11:16:41.367: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/battery/batt_vol' 06-09 11:16:41.367: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/battery/batt_temp' 06-09 11:16:41.667: ERROR/EventHub(53): could not get driver version for /dev/input/mouse0, Not a typewriter 06-09 11:16:41.667: ERROR/EventHub(53): could not get driver version for /dev/input/mice, Not a typewriter 06-09 11:16:41.797: ERROR/System(53): Failure starting core service 06-09 11:16:41.797: ERROR/System(53): java.lang.SecurityException 06-09 11:16:41.797: ERROR/System(53): at android.os.BinderProxy.transact(Native Method) 06-09 11:16:41.797: ERROR/System(53): at android.os.ServiceManagerProxy.addService(ServiceManagerNative.java:146) 06-09 11:16:41.797: ERROR/System(53): at android.os.ServiceManager.addService(ServiceManager.java:72) 06-09 11:16:41.797: ERROR/System(53): at com.android.server.ServerThread.run(SystemServer.java:162) 06-09 11:16:41.797: ERROR/AndroidRuntime(53): Crash logging skipped, no checkin service 06-09 11:16:42.777: ERROR/LockPatternKeyguardView(53): Failed to bind to GLS while checking for account 06-09 11:16:46.557: ERROR/ActivityThread(111): Failed to find provider info for com.google.settings 06-09 11:16:46.577: ERROR/ActivityThread(111): Failed to find provider info for com.google.settings 06-09 11:16:49.087: ERROR/ApplicationContext(53): Couldn't create directory for SharedPreferences file shared_prefs/wallpaper-hints.xml 06-09 11:16:51.146: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:54.266: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:54.416: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:56.336: ERROR/MediaPlayerService(31): Couldn't open fd for content://settings/system/notification_sound 06-09 11:16:56.356: ERROR/MediaPlayer(53): Unable to to create media player 06-09 11:16:56.637: ERROR/AndroidRuntime(201): Uncaught handler: thread main exiting due to uncaught exception 06-09 11:16:56.757: ERROR/AndroidRuntime(201): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.svgeeks.kidneytest/com.svgeeks.kidneytest.KidneyTest}: java.lang.ClassCastException: android.widget.EditText 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2401) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2417) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.access$2100(ActivityThread.java:116) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1794) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.os.Handler.dispatchMessage(Handler.java:99) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.os.Looper.loop(Looper.java:123) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.main(ActivityThread.java:4203) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invokeNative(Native Method) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invoke(Method.java:521) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at dalvik.system.NativeStart.main(Native Method) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): Caused by: java.lang.ClassCastException: android.widget.EditText 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.svgeeks.kidneytest.KidneyTest.onCreate(KidneyTest.java:57) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1123) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2364) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): ... 11 more 06-09 11:16:56.876: ERROR/dalvikvm(201): Unable to open stack trace file '/data/anr/traces.txt': Permission denied

Read the article

Error on writing data to DVD

- by sijith

Hi, From past 1 week i stuck on this please help me i am attaching code. bool DVDBurner::Burner() { m_hResult = CoCreateInstance(__uuidof(MsftDiscFormat2Data), NULL, CLSCTX_INPROC_SERVER, __uuidof(IDiscFormat2Data), (void**)&m_discFormatData); if (!SUCCEEDED(m_hResult)) { qDebug()<<"Unable to Initialize IDiscFormat2Data "; return false; } m_hResult = CoCreateInstance(__uuidof(MsftDiscRecorder2), NULL, CLSCTX_INPROC_SERVER, __uuidof(IDiscRecorder2), (void**)&m_discRecorder); if (FAILED(m_hResult)) { qDebug()<<"Unable to Initialize IDiscRecorder2 Data "; return false; } BSTR bstrDeviceName; HRESULT hr = S_OK; BOOL bComInitialised; UINT iCounter = 0; LONG lValue = 0; LONG iCount; bComInitialised = SUCCEEDED(CoInitializeEx(0, COINIT_MULTITHREADED)); // Create an object of IDiscMaster2 if (SUCCEEDED(hr)){ CoCreateInstance( CLSID_MsftDiscMaster2, NULL, CLSCTX_ALL, IID_PPV_ARGS(&discMaster) ); if(FAILED(hr)){ qDebug()<<"\nUnsuccessful in creating an instance of CLSID_MsftDiscMaster2.\n\nError returned: 0x%x\n"<<hr; return 0; } } /////////////////////////// Get the number of drives/////////////////////////////// if (SUCCEEDED(hr)){ hr = discMaster->get_Count(&lValue); if (SUCCEEDED(hr)){ printf("lValue %d\n\n",lValue); } } ////////////////////////// Print all the optical drives attached to the system//// if (SUCCEEDED(hr)){ for(iCount = 0; iCount < lValue; iCount++) { hr = discMaster->get_Item(iCount, &bstrDeviceName); qDebug()<<"\nUnique identifier of the disc device associated with index"<< iCount<< bstrDeviceName; } } m_hResult = m_discRecorder->InitializeDiscRecorder(bstrDeviceName); if (!SUCCEEDED(m_hResult)) { qDebug()<<"IDiscFormat2Data->InitializeDiscRecorder Failed "; return false; } LPCWSTR pszFile=L"D:\\Test\\output.txt"; ULONGLONG mediaSize = 0; mediaSize=GetSizeOnDisc(pszFile); IStream* dataStream = NULL; if (dataStream == NULL) { SHCreateStreamOnFileEx(pszFile, STGM_READ|STGM_SHARE_DENY_NONE|STGM_DELETEONRELEASE, FILE_ATTRIBUTE_NORMAL, FALSE,NULL, &dataStream); } m_hResult = m_discFormatData->put_Recorder(GetInterface()); if (!SUCCEEDED(m_hResult)) { qDebug()<<"IDiscFormat2Data->put_Recorder Failed ";return false;} char *ansistr = "DVDBurner"; int a = lstrlenA(ansistr); BSTR unicodestr = SysAllocStringLen(NULL, a); ::MultiByteToWideChar(CP_ACP, 0, ansistr, a, unicodestr, a); m_hResult = m_discFormatData->put_ClientName(unicodestr); if (FAILED(m_hResult)){qDebug()<<"Unable to put_ClientName(buf_bstr)";return false;} m_hResult = m_discFormatData->Write(dataStream); // Here i am getting error 0xc0aa0403 if (FAILED(m_hResult)){printf("Unable to m_discFormatData- >Write::::Error:0x%08x",m_hResult); return false;} discMaster->Release(); CoUninitialize(); bComInitialised = FALSE; return 0; } ULONGLONG DVDBurner::GetSizeOnDisc(LPCWSTR pszFile) { CFileStatus status; if (CFile::GetStatus(pszFile, status)) { if (status.m_size > 0) { return ((status.m_size / SECTOR_SIZE) + 1) * SECTOR_SIZE; } } return 0; }

Read the article

Problems with shutting down JBoss in Eclipse if I change JNDI port

- by Balint Pato

1st phase I have a problem shutting down my running JBoss instance under Eclipse since I changed the JNDI port of JBoss. Of course I can shut it down from the console view but not with the stop button (it still searches JNDI port at the default 1099 port). I'm looking forward to any solutions. Thank you! Used environment: JBoss 4.0.2 (using default) Eclipse 3.4.0. (using JBoss Tools 2.1.1.GA) Default ports: 1098, 1099 Changed ports: 11098, 11099 I changed the following part in jbosspath/server/default/conf/jboss-service.xml:    <mbean code="org.jboss.naming.NamingService" name="jboss:service=Naming" xmbean-dd="resource:xmdesc/NamingService-xmbean.xml">  <attribute name="CallByValue">false</attribute>  <attribute name="Port">11099</attribute>  <attribute name="BindAddress">${jboss.bind.address}</attribute>  <attribute name="RmiPort">11098</attribute>  <attribute name="RmiBindAddress">${jboss.bind.address}</attribute>  <depends optional-attribute-name="LookupPool" proxy-type="attribute">jboss.system:service=ThreadPool</depends> </mbean> <mbean code="org.jboss.naming.JNDIView" name="jboss:service=JNDIView" xmbean-dd="resource:xmdesc/JNDIView-xmbean.xml"> </mbean> Eclipse setup: About my JBoss Tools preferences: I had a previous version, I got this problem, I read about some bugfix in JbossTools, so updated to 2.1.1.GA. Now the buttons changed, and I've got a new preferences view, but I cannot modify anything...seems to be abnormal as well: Error dialog: The stacktrace: javax.naming.CommunicationException: Could not obtain connection to any of these urls: localhost:1099 [Root exception is javax.naming.CommunicationException: Failed to connect to server localhost:1099 [Root exception is javax.naming.ServiceUnavailableException: Failed to connect to server localhost:1099 [Root exception is java.net.ConnectException: Connection refused: connect]]] at org.jnp.interfaces.NamingContext.checkRef(NamingContext.java:1385) at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:579) at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572) at javax.naming.InitialContext.lookup(InitialContext.java:347) at org.jboss.Shutdown.main(Shutdown.java:202) Caused by: javax.naming.CommunicationException: Failed to connect to server localhost:1099 [Root exception is javax.naming.ServiceUnavailableException: Failed to connect to server localhost:1099 [Root exception is java.net.ConnectException: Connection refused: connect]] at org.jnp.interfaces.NamingContext.getServer(NamingContext.java:254) at org.jnp.interfaces.NamingContext.checkRef(NamingContext.java:1370) ... 4 more Caused by: javax.naming.ServiceUnavailableException: Failed to connect to server localhost:1099 [Root exception is java.net.ConnectException: Connection refused: connect] at org.jnp.interfaces.NamingContext.getServer(NamingContext.java:228) ... 5 more Caused by: java.net.ConnectException: Connection refused: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158) at java.net.Socket.connect(Socket.java:452) at java.net.Socket.connect(Socket.java:402) at java.net.Socket.<init>(Socket.java:309) at java.net.Socket.<init>(Socket.java:211) at org.jnp.interfaces.TimedSocketFactory.createSocket(TimedSocketFactory.java:69) at org.jnp.interfaces.TimedSocketFactory.createSocket(TimedSocketFactory.java:62) at org.jnp.interfaces.NamingContext.getServer(NamingContext.java:224) ... 5 more Exception in thread "main" 2nd phase: After creating a new Server in File/new/other/server, it did appear in the preferences tab. Now the stop button is working (the server receives the shutdown messages without any additional modification of the jndi port -- there is no opportunity for it now) but it still throws an error message, though different, it's without exception stack trace: "Server JBoss 4.0 Server failed to stop."

Read the article

Maven changelog plugin with Mercurial problem

- by doom2.wad

I have configured my Maven2 project to generate a changelog report from a Mercurial repository (accessible via file:// protocol) but the goal execution fails with the following message: + Error stacktraces are turned on. [INFO] Scanning for projects... [INFO] Searching repository for plugin with prefix: 'changelog'. [INFO] ------------------------------------------------------------------------ [INFO] Building Phobos3 Prototype [INFO] task-segment: [changelog:changelog] [INFO] ------------------------------------------------------------------------ [INFO] [changelog:changelog {execution: default-cli}] [INFO] Generating changed sets xml to: D:\Documents and Settings\501845922\Workspace\phobos3.prototype\target\changelog.xml [INFO] EXECUTING: hg log --verbose [WARNING] Could not figure out: abort: Invalid argument [ERROR] EXECUTION FAILED Execution of cmd : log failed with exit code: -1. Working directory was: D:\Documents and Settings\501845922\Workspace\phobos3.prototype Your Hg installation seems to be valid and complete. Hg version: 1.4.3+20100201 (OK) [ERROR] Provider message: [ERROR] EXECUTION FAILED Execution of cmd : log failed with exit code: -1. Working directory was: D:\Documents and Settings\501845922\Workspace\phobos3.prototype Your Hg installation seems to be valid and complete. Hg version: 1.4.3+20100201 (OK) [ERROR] Command output: [ERROR] [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] An error has occurred in Change Log report generation. Embedded error: An error has occurred during changelog command : Command failed. [INFO] ------------------------------------------------------------------------ [INFO] Trace org.apache.maven.lifecycle.LifecycleExecutionException: An error has occurred in Change Log report generation. at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:719) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandaloneGoal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(DefaultLifecycleExecutor.java:348) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:60) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: org.apache.maven.plugin.MojoExecutionException: An error has occurred in Change Log report generation. at org.apache.maven.reporting.AbstractMavenReport.execute(AbstractMavenReport.java:79) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:694) ... 17 more Caused by: org.apache.maven.reporting.MavenReportException: An error has occurred during changelog command : at org.apache.maven.plugin.changelog.ChangeLogReport.generateChangeSetsFromSCM(ChangeLogReport.java:555) at org.apache.maven.plugin.changelog.ChangeLogReport.getChangedSets(ChangeLogReport.java:393) at org.apache.maven.plugin.changelog.ChangeLogReport.executeReport(ChangeLogReport.java:340) at org.apache.maven.reporting.AbstractMavenReport.generate(AbstractMavenReport.java:98) at org.apache.maven.reporting.AbstractMavenReport.execute(AbstractMavenReport.java:73) ... 19 more Caused by: org.apache.maven.plugin.MojoExecutionException: Command failed. at org.apache.maven.plugin.changelog.ChangeLogReport.checkResult(ChangeLogReport.java:705) at org.apache.maven.plugin.changelog.ChangeLogReport.generateChangeSetsFromSCM(ChangeLogReport.java:467) ... 23 more [INFO] ------------------------------------------------------------------------ [INFO] Total time: 3 seconds [INFO] Finished at: Thu Apr 29 17:10:06 CEST 2010 [INFO] Final Memory: 5M/10M [INFO] ------------------------------------------------------------------------ What did I miss in a configuration? (I hope it is a configuration problem not a Maven plugins related bug!:) My repository URL seems to be ok (the plugin has been complaining before, I fixed that up), I also set a date format for parsing (also been complaining, also fixed). target/changelog.xml being promised was not generated at all. Maven 2.2.1 Mercurial 1.4.3 Windows XP SP3 mvn scm:changelog command provides an expected output. Thanks for any suggestions, I haven't googled up anything (nor binged up;).

Read the article

PPTP server stuck at "GRE: Bad checksum from pppd"

- by user92516

I am a network engineer having quite limited experience with Ubuntu. I have been following up these online instructions to set up a pptp server but without much luck to get it to work. My server is a vm running an Apple Xserve behind a Cisco firewall. I made sure tcp 1723 and GRE are opened for the box. Below is the syslog output, looks like I always got stuck at GRE: Bad checksum from pppd. I'm running Ubuntu 10.04. Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Reaping child PPP[1232] Sep 24 13:21:53 ubuntu pptpd[1231]: CTRL: Client 166.137.85.165 control connection finished Sep 24 13:22:41 ubuntu pptpd[1276]: MGR: connections limit (100) reached, extra IP addresses ignored Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Manager process started Sep 24 13:22:41 ubuntu pptpd[1277]: MGR: Maximum of 100 connections available Sep 24 13:22:50 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection started Sep 24 13:22:51 ubuntu pptpd[1278]: CTRL: Starting call (launching pppd, opening GRE) Sep 24 13:22:51 ubuntu pppd[1279]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Sep 24 13:22:51 ubuntu pppd[1279]: pppd 2.4.5 started by root, uid 0 Sep 24 13:22:51 ubuntu pppd[1279]: Using interface ppp0 Sep 24 13:22:51 ubuntu pppd[1279]: Connect: ppp0 <--> /dev/pts/1 Sep 24 13:22:51 ubuntu pptpd[1278]: GRE: Bad checksum from pppd. Sep 24 13:23:21 ubuntu pppd[1279]: LCP: timeout sending Config-Requests Sep 24 13:23:21 ubuntu pppd[1279]: Connection terminated. Sep 24 13:23:21 ubuntu pppd[1279]: Modem hangup Sep 24 13:23:21 ubuntu pppd[1279]: Exit. Sep 24 13:23:21 ubuntu pptpd[1278]: GRE: read(fd=6,buffer=805a540,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Reaping child PPP[1279] Sep 24 13:23:21 ubuntu pptpd[1278]: CTRL: Client 166.137.85.165 control connection finished

Read the article

SQL SERVER – Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video

- by pinaldave

One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. I have earlier written an article about this which describes how to resolve the errors which are related to SQL Server connection. Even though the step by step directions are pretty simple there are many first time IT Professional who are not able to figure out how to resolve this error. I have quickly built a video which is covering most of the solutions related to resolving the connection error. In the Fix SQL Server Connection Error article following workarounds are described: SQL Server Services TCP/IP Settings Firewall Settings Enable Remote Connection Browser Services Firewall exception of sqlbrowser.exe Recreating Alias Related Tips in SQL in Sixty Seconds: SQL SERVER – FIX : ERROR : (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: ) SQL SERVER – Could not connect to TCP error code 10061: No connection could be made because the target machine actively refused it SQL SERVER – Connecting to Server Using Windows Authentication by SQLCMD SQL SERVER – Fix : Error: 15372 Failed to generate a ser instance od SQL Server due to a failure in starting the process for the user instance. The connection will be closed SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port. SQL SERVER – Fix : Error: 4064 – Cannot open user default database. Login failed. Login failed for user What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

Read the article

"Vidalia detected that the Tor software exited unexpectedly."

- by Brian

I can start and kill tor via command line, but I want to control it with Vidalia. The browser bundle works, but I'd rather not use it. This is the message log in vidalia: Sep 25 19:29:13.696 [Notice] Tor v0.2.3.22-rc (git-4a0c70a817797420) running on Linux. Sep 25 19:29:13.696 [Notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning Sep 25 19:29:13.696 [Notice] Read configuration file "/home/brian/.vidalia/torrc". Sep 25 19:29:13.697 [Notice] Initialized libevent version 2.0.16-stable using method epoll (with changelist). Good. Sep 25 19:29:13.697 [Notice] Opening Socks listener on 127.0.0.1:9050 Sep 25 19:29:13.697 [Warning] /var/run/tor is not owned by this user (brian, 1000) but by debian-tor (114). Perhaps you are running Tor as the wrong user? Sep 25 19:29:13.697 [Warning] Before Tor can create a control socket in "/var/run/tor/control", the directory "/var/run/tor" needs to exist, and to be accessible only by the user account that is running Tor. (On some Unix systems, anybody who can list a socket can connect to it, so Tor is being careful.) Sep 25 19:29:13.698 [Notice] Closing partially-constructed Socks listener on 127.0.0.1:9050 Sep 25 19:29:13.698 [Warning] Failed to parse/validate config: Failed to bind one of the listener ports. Sep 25 19:29:13.698 [Error] Reading config failed--see warnings above.

Read the article

error X3501: 'main': entrypoint not found

- by Pasha

I am trying to learn DX10 by following this tutorial. However, my shader won't compile. Below is the detailed error message. Build started 9/10/2012 10:22:46 PM. 1>Project "D:\code\dx\Engine\Engine\Engine.vcxproj" on node 2 (Build target(s)). C:\Program Files (x86)\Windows Kits\8.0\bin\x86\fxc.exe /nologo /E"main" /Fo "D:\code\dx\Engine\Debug\color.cso" /Od /Zi color.fx 1>FXC : error X3501: 'main': entrypoint not found compilation failed; no code produced 1>Done Building Project "D:\code\dx\Engine\Engine\Engine.vcxproj" (Build target(s)) -- FAILED. Build FAILED. Time Elapsed 00:00:00.05 I can easily compile the downloaded code, but I want to know how to fix this error myself. My color.fx looks like this //////////////////////////////////////////////////////////////////////////////// // Filename: color.fx //////////////////////////////////////////////////////////////////////////////// ///////////// // GLOBALS // ///////////// matrix worldMatrix; matrix viewMatrix; matrix projectionMatrix; ////////////// // TYPEDEFS // ////////////// struct VertexInputType { float4 position : POSITION; float4 color : COLOR; }; struct PixelInputType { float4 position : SV_POSITION; float4 color : COLOR; }; //////////////////////////////////////////////////////////////////////////////// // Vertex Shader //////////////////////////////////////////////////////////////////////////////// PixelInputType ColorVertexShader(VertexInputType input) { PixelInputType output; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; // Calculate the position of the vertex against the world, view, and projection matrices. output.position = mul(input.position, worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); // Store the input color for the pixel shader to use. output.color = input.color; return output; } //////////////////////////////////////////////////////////////////////////////// // Pixel Shader //////////////////////////////////////////////////////////////////////////////// float4 ColorPixelShader(PixelInputType input) : SV_Target { return input.color; } //////////////////////////////////////////////////////////////////////////////// // Technique //////////////////////////////////////////////////////////////////////////////// technique10 ColorTechnique { pass pass0 { SetVertexShader(CompileShader(vs_4_0, ColorVertexShader())); SetPixelShader(CompileShader(ps_4_0, ColorPixelShader())); SetGeometryShader(NULL); } }

Read the article

Cant install AMD Catalyst Radeon 12.10 drivers on Ubuntu 12.10 [closed]

- by Rey Mestidio

Possible Duplicate: What is the correct way to install ATI Catalyst Video Drivers? I am trying to install the latest AMD Catalyst Radeon 12.10 drivers on Ubuntu 12.10. When I get to the ready to install screen I get an error message. This is the message from the install log file. I'm not sure what to do. Thanks very much for your help in advance! **Supported adapter detected. Check if system has the tools required for installation. fglrx installation requires that the system have kernel headers. /lib/modules/3.5.0-17-generic/build/include/linux/version.h cannot be found on this system. One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver. Optionally, run the installer with --force option to install without the tools. Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended.**

Read the article

KB Articles on My Oracle Support

- by Anthony Shorten

My Oracle Support is a valuable resource for product information and how to's. It is not just about bug fixes and service packs. To find articles pertaining to any Oracle Utilities product you logon to My Oracle Support (your DBA shoud have access at least) and use the following path to Navigate to the articles: Knowledge - More Applications - Industry Solutions - Utilities You are then presented with a list of products, just select the one that you are interested in. You are then pressented with a list of articles available (25 per page). You can also search on keywords for articles. Here is a list of ones I find useful (with KB ID in []): Customer Care and Billing V2.2.0 Unix Installation Questions [ID 844645.1] Known Framework (FW) Errors [ID 783823.1] Weblogic 10 MP2 CCB Support Question [ID 1119383.1] CCB v2.2.0 Performance Problem Under Heavy Concurrent User Load [ID 808233.1] - This is a description of a patch for performance What Is The Meaning Of The TRUE And FALSE Setting For REL_CBL_THREAD_MEM Within OUAF For Oracle Utilities CCB, BI & ETM [ID 783444.1] Oracle Utilities Framework Support Utility [ID 1079640.1] How to customize XAI error messages? [ID 1061394.1] Oracle Utilities Application Framework - Patch Installation [ID 974985.1] Action Plan for Creating a Weblogic Custom Authentication Provider [ID 954417.1] How to set up XAI service on multiple servers to provide redundancy? [ID 854215.1] The first one is very useful and answer lots of how to questions for installation.

Read the article

Connecting Linux to WatchGuard Firebox SSL (OpenVPN client)

Recently, I got a new project assignment that requires to connect permanently to the customer's network through VPN. They are using a so-called SSL VPN. As I am using OpenVPN since more than 5 years within my company's network I was quite curious about their solution and how it would actually be different from OpenVPN. Well, short version: It is a disguised version of OpenVPN. Unfortunately, the company only offers a client for Windows and Mac OS which shouldn't bother any Linux user after all. OpenVPN is part of every recent distribution and can be activated in a couple of minutes - both client as well as server (if necessary). WatchGuard Firebox SSL - About dialog Borrowing some files from a Windows client installation Initially, I didn't know about the product, so therefore I went through the installation on Windows 8. No obstacles (and no restart despite installation of TAP device drivers!) here and the secured VPN channel was up and running in less than 2 minutes or so. Much appreciated from both parties - customer and me. Of course, this whole client package and my long year approved and stable installation ignited my interest to have a closer look at the WatchGuard client. Compared to the original OpenVPN client (okay, I have to admit this is years ago) this commercial product is smarter in terms of file locations during installation. You'll be able to access the configuration and key files below your roaming application data folder. To get there, simply enter '%AppData%\WatchGuard\Mobile VPN' in your Windows/File Explorer and confirm with Enter/Return. This will display the following files: Application folder below user profile with configuration and certificate files From there we are going to borrow four files, namely: ca.crt client.crt client.ovpn client.pem and transfer them to the Linux system. You might also be able to isolate those four files from a Mac OS client. Frankly, I'm just too lazy to run the WatchGuard client installation on a Mac mini only to find the folder location, and I'm going to describe why a little bit further down this article. I know that you can do that! Feedback in the comment section is appreciated. Configuration of OpenVPN (console) Depending on your distribution the following steps might be a little different but in general you should be able to get the important information from it. I'm going to describe the steps in Ubuntu 13.04 (Raring Ringtail). As usual, there are two possibilities to achieve your goal: console and UI. Let's what it is necessary to be done. First of all, you should ensure that you have OpenVPN installed on your system. Open your favourite terminal application and run the following statement: $ sudo apt-get install openvpn network-manager-openvpn network-manager-openvpn-gnome Just to be on the safe side. The four above mentioned files from your Windows machine could be copied anywhere but either you place them below your own user directory or you put them (as root) below the default directory: /etc/openvpn At this stage you would be able to do a test run already. Just in case, run the following command and check the output (it's the similar information you would get from the 'View Logs...' context menu entry in Windows: $ sudo openvpn --config client.ovpn Pay attention to the correct path to your configuration and certificate files. OpenVPN will ask you to enter your Auth Username and Auth Password in order to establish the VPN connection, same as the Windows client. Remote server and user authentication to establish the VPN Please complete the test run and see whether all went well. You can disconnect pressing Ctrl+C. Simplifying your life - authentication file In my case, I actually set up the OpenVPN client on my gateway/router. This establishes a VPN channel between my network and my client's network and allows me to switch machines easily without having the necessity to install the WatchGuard client on each and every machine. That's also very handy for my various virtualised Windows machines. Anyway, as the client configuration, key and certificate files are located on a headless system somewhere under the roof, it is mandatory to have an automatic connection to the remote site. For that you should first change the file extension '.ovpn' to '.conf' which is the default extension on Linux systems for OpenVPN, and then open the client configuration file in order to extend an existing line. $ sudo mv client.ovpn client.conf $ sudo nano client.conf You should have a similar content to this one here: dev tunclientproto tcp-clientca ca.crtcert client.crtkey client.pemtls-remote "/O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server"remote-cert-eku "TLS Web Server Authentication"remote 1.2.3.4 443persist-keypersist-tunverb 3mute 20keepalive 10 60cipher AES-256-CBCauth SHA1float 1reneg-sec 3660nobindmute-replay-warningsauth-user-pass auth.txt Note: I changed the IP address of the remote directive above (which should be obvious, right?). Anyway, the required change is marked in red and we have to create a new authentication file 'auth.txt'. You can give the directive 'auth-user-pass' any file name you'd like to. Due to my existing OpenVPN infrastructure my setup differs completely from the above written content but for sake of simplicity I just keep it 'as-is'. Okay, let's create this file 'auth.txt' $ sudo nano auth.txt and just put two lines of information in it - username on the first, and password on the second line, like so: myvpnusernameverysecretpassword Store the file, change permissions, and call openvpn with your configuration file again: $ sudo chmod 0600 auth.txt $ sudo openvpn --config client.conf This should now work without being prompted to enter username and password. In case that you placed your files below the system-wide location /etc/openvpn you can operate your VPNs also via service command like so: $ sudo service openvpn start client $ sudo service openvpn stop client Using Network Manager For newer Linux users or the ones with 'console-phobia' I'm going to describe now how to use Network Manager to setup the OpenVPN client. For this move your mouse to the systray area and click on Network Connections => VPN Connections => Configure VPNs... which opens your Network Connections dialog. Alternatively, use the HUD and enter 'Network Connections'. Network connections overview in Ubuntu Click on 'Add' button. On the next dialog select 'Import a saved VPN configuration...' from the dropdown list and click on 'Create...' Choose connection type to import VPN configuration Now you navigate to your folder where you put the client files from the Windows system and you open the 'client.ovpn' file. Next, on the tab 'VPN' proceed with the following steps (directives from the configuration file are referred): General Check the IP address of Gateway ('remote' - we used 1.2.3.4 in this setup) Authentication Change Type to 'Password with Certificates (TLS)' ('auth-pass-user') Enter User name to access your client keys (Auth Name: myvpnusername) Enter Password (Auth Password: verysecretpassword) and choose your password handling Browse for your User Certificate ('cert' - should be pre-selected with client.crt) Browse for your CA Certificate ('ca' - should be filled as ca.crt) Specify your Private Key ('key' - here: client.pem) Then click on the 'Advanced...' button and check the following values: Use custom gateway port: 443 (second value of 'remote' directive) Check the selected value of Cipher ('cipher') Check HMAC Authentication ('auth') Enter the Subject Match: /O=WatchGuard_Technologies/OU=Fireware/CN=Fireware_SSLVPN_Server ('tls-remote') Finally, you have to confirm and close all dialogs. You should be able to establish your OpenVPN-WatchGuard connection via Network Manager. For that, click on the 'VPN Connections => client' entry on your Network Manager in the systray. It is advised that you keep an eye on the syslog to see whether there are any problematic issues that would require some additional attention. Advanced topic: routing As stated above, I'm running the 'WatchGuard client for Linux' on my head-less server, and since then I'm actually establishing a secure communication channel between two networks. In order to enable your network clients to get access to machines on the remote side there are two possibilities to enable that: Proper routing on both sides of the connection which enables both-direction access, or Network masquerading on the 'client side' of the connection Following, I'm going to describe the second option a little bit more in detail. The Linux system that I'm using is already configured as a gateway to the internet. I won't explain the necessary steps to do that, and will only focus on the additional tweaks I had to do. You can find tons of very good instructions and tutorials on 'How to setup a Linux gateway/router' - just use Google. OK, back to the actual modifications. First, we need to have some information about the network topology and IP address range used on the 'other' side. We can get this very easily from /var/log/syslog after we established the OpenVPN channel, like so: $ sudo tail -n20 /var/log/syslog Or if your system is quite busy with logging, like so: $ sudo less /var/log/syslog | grep ovpn The output should contain PUSH received message similar to the following one: Jul 23 23:13:28 ios1 ovpn-client[789]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route 192.168.1.0 255.255.255.0,dhcp-option DOMAIN ,route-gateway 192.168.6.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.6.2 255.255.255.0' The interesting part for us is the route command which I highlighted already in the sample PUSH_REPLY. Depending on your remote server there might be multiple networks defined (172.16.x.x and/or 10.x.x.x). Important: The IP address range on both sides of the connection has to be different, otherwise you will have to shuffle IPs or increase your the netmask. {loadposition content_adsense} After the VPN connection is established, we have to extend the rules for iptables in order to route and masquerade IP packets properly. I created a shell script to take care of those steps: #!/bin/sh -eIPTABLES=/sbin/iptablesDEV_LAN=eth0DEV_VPNS=tun+VPN=192.168.1.0/24 $IPTABLES -A FORWARD -i $DEV_LAN -o $DEV_VPNS -d $VPN -j ACCEPT$IPTABLES -A FORWARD -i $DEV_VPNS -o $DEV_LAN -s $VPN -j ACCEPT$IPTABLES -t nat -A POSTROUTING -o $DEV_VPNS -d $VPN -j MASQUERADE I'm using the wildcard interface 'tun+' because I have multiple client configurations for OpenVPN on my server. In your case, it might be sufficient to specify device 'tun0' only. Simplifying your life - automatic connect on boot Now, that the client connection works flawless, configuration of routing and iptables is okay, we might consider to add another 'laziness' factor into our setup. Due to kernel updates or other circumstances it might be necessary to reboot your system. Wouldn't it be nice that the VPN connections are established during the boot procedure? Yes, of course it would be. To achieve this, we have to configure OpenVPN to automatically start our VPNs via init script. Let's have a look at the responsible 'default' file and adjust the settings accordingly. $ sudo nano /etc/default/openvpn Which should have a similar content to this: # This is the configuration file for /etc/init.d/openvpn## Start only these VPNs automatically via init script.# Allowed values are "all", "none" or space separated list of# names of the VPNs. If empty, "all" is assumed.# The VPN name refers to the VPN configutation file name.# i.e. "home" would be /etc/openvpn/home.conf#AUTOSTART="all"#AUTOSTART="none"#AUTOSTART="home office"## ... more information which remains unmodified ... With the OpenVPN client configuration as described above you would either set AUTOSTART to "all" or to "client" to enable automatic start of your VPN(s) during boot. You should also take care that your iptables commands are executed after the link has been established, too. You can easily test this configuration without reboot, like so: $ sudo service openvpn restart Enjoy stable VPN connections between your Linux system(s) and a WatchGuard Firebox SSL remote server. Cheers, JoKi

Read the article

Triple boot vista xp ubuntu

- by Artyom2033

My partition table is pretty messed up from install/uninstall os and what I want to do now is to clear that and have vista/xp/ubuntu 12.04 on the same hard drive. I have create a new partition for xp on vista, everything was fine, but when I restarted my pc, I was getting the grub restore prompt. Even when I was trying to install xp, when the 'lunch windows' came, a wild BSOD appear. So I have deleted my partition for xp using gParted include in the 12.04 live cd. This haven't resolve the problem and I am still unable to boot in vista nor ubuntu. But I realy what this triple boot for LoL purpose (since my vista installation keep giving latency spike in this game and I hope this will not be the case in a fresh xp installation (I have tested it in ubuntu, the ping was good, but the fps wasn't). So what I want to do, is to install xp on a partition, then be able to boot on any of them without a problem from a nice installation of grub or something. gParted screenshot Thanks for help. Sorry for my English.

Read the article

Troubleshooting SQL Azure Connectivity

- by kaleidoscope

Technorati Tags: Rituraj,Connectivity Issues with SQL Azure Troubleshooting SQL Azure Connectivity How to resolve some of the common connectivity error messages that you would see while connecting to SQL Azure A transport-level error has occurred when receiving results from the server. (Provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections Error: Microsoft SQL Native Client: Unable to complete login process due to delay in opening server connection. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. Some troubleshooting tips a) Verify Azure Firewall Settings and Service Availability Reference: SQL Azure Firewall - http://msdn.microsoft.com/en-us/library/ee621782.aspx b) Verify that you can reach our Virtual IP Reference: Telnet Troubleshooting Guide - http://technet.microsoft.com/en-us/library/cc753360(WS.10).aspx Reference: How to Use TRACERT to Troubleshoot TCP/IP Problems in Windows - http://support.microsoft.com/kb/314868 c) Windows Firewall on the local machine Frequently Asked Questions - http://msdn.microsoft.com/en-us/library/bb736261(VS.85).aspx Reference: Windows Firewall with Advanced Security Getting Started Guide - http://technet.microsoft.com/en-us/library/cc748991(WS.10).aspx d) Other Firewall products Reference: http://www.whatismyip.com/ e) Generate a Network Trace using Microsoft Network Monitor tool Reference: How to capture network traffic with Network Monitor - http://support.microsoft.com/kb/148942 f) SQL Azure Denial of Service (DOS) Guard SQL Azure utilizes techniques to prevent denial of service attacks. If your connection is getting reset by our service due to a potential DOS attack you would be able to see a three way handshake established and then a RESET in your network trace.

Read the article

How can I recover data after mistakenly clean-installed 12.04 over 11.10?

- by T.Kannan

I recently got a Ubuntu 12.04 LTS i386 DVD Rom and Ubuntu 12.04 LTS alternate cd from the zyxware.com because I don't have a broadband personal connection at home, I am using only the office INTERNET. I have a Dell Inspiron Laptop core 2 duo Processor with 2GB Ram dual boot of Ubuntu 11.10 and Windows Vista. I tried to upgrade My existing fully equipped streamlined Ubuntu 11.10 OS with lot of documents and socialized application packages which have been frequently used by me for the last one year. First I tried to install upgradation from the Ubuntu 12.04 LTS alternate cd while ubuntu 11.10 is on, but every time I got a error message and I couldn't upgrade either thro desktop or through terminal. Then I tried Ubuntu 12.04 LTS i386 DVD the boot option to DVD, I tried to upgrade from existing 11.10 to 12.04 LTS Option, then Upgrading Installation started well and finally got a message Installation completed successfully, Asked for reboot, I rebooted then I have hot a Ubuntu 12.04 LTS Login and I logged on, I have got a big shock that there is everything washed away in the home folders ( all datas, Music collections and vedios etc), all the application installed early in 11.10 were gone nothing left. Now I have got only 12.04 LTS, even It is asking for me to update around 350 mb through net connection. How It was a crazy Ubuntu, It is not a up-gradation, new installation is not it? I loosed everthing, at the end I got the same desktop screen like Ubuntu 11.10. Anybody knows about what gone wrong and if any possibility to recover my datas? Please help me. I want to Know that which method is stable to Upgrade existing Ubunt11.10

Read the article

Additional options in MDL

- by Jane Zhang

The Metadata Loader(MDL) enables you to populate a new repository as well as transfer, update, or restore a backup of existing repository metadata. It consists of two utilities: metadata export and metadata import. The export utility extracts metadata objects from a repository and writes the information into a file. The import utility reads the metadata information from an exported file and inserts the metadata objects into a repository. While the Design Client provides an intuitive UI that helps you perform the most commonly used export and import tasks, OMBPlus scripting enables you to specify some additional options, and manage a control file that allows you to perform more specialized export and import tasks. Is it possible to utilize these options in MDL from Design Client? This article will tell you how to achieve it. A property file named mdl.properties is used to configure the additional options. It stores options in name/value pairs. This file can be created and placed under the directory <owb installation path>/owb/bin/admin/. Below we will introduce the options that can be specified in the mdl.properties file. 1. DEFAULTDIRECTORY When we open a Metadata Export/Import dialog in Design Client, a default directory is provided for MDL file and log file. For MDL Export, the default directory is <owb installation path>/owb/bin/. As for MDL Import, the default directory is <owb installation path>/owb/mdl/. It may not be the one you would want to use as a default. You can specify the option DEFAULTDIRECTORY in the mdl.properties file to set your own default directory for MDL Export/Import, for example, DEFAULTDIRECOTRY=/tmp/ In this example, the default directory is set to /tmp/. Be sure the value ends with a file separator since it represents a directory. In Windows, the file separator is “\”. In linux, the file separator is “/”. 2. MDLTRACEFILE Sometimes we would like to trace the whole process of MDL Export/Import, and get detailed information about operations to help developers or supports troubleshooting. To turn on MDL trace, set the option MDLTRACEFILE in the mdl.properties file. MDLTRACEFILE=/tmp/mdl.trc The right side of the equals sign is to specify the name of the file for MDL trace information to be written. If no path is specified, the file will be placed under directory <owb installation path>/owb/bin/admin/. However, the trace file may be large if the MDL file contains a large number of metadata objects, so please use this option sparingly. 3. CONTROLFILE We can use a control file to specify how objects are imported or exported. We can set an option called CONTROLFILE in the mdl.properties file, so the control file can also be utilized in Design Client, for example, CONTROLFILE=/tmp/mdl_control_file.ctl The control file stores options in name/value pairs. When using control file, be sure the file exists, otherwise an exception java.lang.Exception: CNV0002-0031(ERROR): Cannot find specified file will be thrown out during MDL Export/Import. Next we will introduce some options specified in control file. ZIPFILEFORMAT By default, MDL exports objects into a zip format file. This zip file has an .mdl extension and contains two files. For example, you export the repository metadata into a file called projects.mdl. When you unzip this MDL file, you obtain two files. The file projects.mdx contains the repository objects. The file mdlcatalog.xml contains internal information about the MDL XML file. Another choice is to combine these two files into one unzip text format file when doing MDL exporting. In OMBPlus command related to MDL, there is an option called FILE_FORMAT which is used to specify the file format for the exported file. Its acceptable values are ZIP or TEXT. When the value TEXT is selected, the exported file is in text format, for example, OMBEXPORT MDL_FILE '/tmp/options_file_format_test.mdl' FILE_FORMAT TEXT FROM PROJECT 'MY_PROJECT' How to achieve this via Design Client when doing an MDL exporting? Here we have another option called ZIPFILEFORMAT which has the same function as the FILE_FORMAT. The difference is the acceptable values for ZIPFILEFORMAT are Y or N. When the value is set to N, the exported file is in text format, otherwise it is in zip file format. LOGMESSAGELEVEL Whenever you export or import repository metadata, MDL writes diagnostic and statistical information to a log file. Their are 3 types of status messages: Informational, Warning and Error. By default, the log file includes all types of message. Sometimes, user may only care about one type of messages, for example, they would like only error messages written to the log file. In order to achieve this, we can set an option called LOGMESSAGELEVEL in control file. The acceptable values for LOGMESSAGELEVEL are ALL, WARNING and ERROR. ALL: If the option LOGMESSAGELEVEL is set to ALL, all types of messages (Informational, Warning and Error) will be written into the log file. WARNING: If the option LOGMESSAGELEVEL is set to WARNING, only warning messages will be written into log file. ERROR: If the option LOGMESSAGELEVEL is set to ERROR, only error messages will be written into log file. UPDATEPROJECTATTRIBUTES, UPDATEMODULEATTRIBUTES These two options are used to decide whether updating the attributes of projects/modules. The options work when projects/modules being imported already exist in repository and we use update metadata mode or replace metadata mode to do the MDL import. The acceptable values for these two options are Y or N. If the value is set to Y, the attributes of projects/modules will be updated, otherwise not. Next, let’s give an example to see how these options take effect in MDL. 1. First of all, create the property file mdl.properties under the directory <owb installation path>/owb/bin/admin/. 2. Specify the options in the mdl.properties file, see the following screenshot. 3. Create the control file mdl_control_file.ctl under the directory /tmp/. Set the following options in control file. 4. Log into the OWB Design Client. 5. Create an Oracle module named ORA_MOD_1 under the project MY_PROJECT, then export the project MY_PROJECT into file my_project.mdl. 6. Check the trace file mdl.trc under the directory /tmp/. In this file, we can see very detail information for the above export task. 7. Check the exported MDL file. The file my_project.mdl is in text format. Opening the file, you can see the content of the file directly. It concats the file my_project.mdx and mdlcatalog.xml. 8. Modify the project MY_PROJECT and Oracle module ORA_MOD_1, add descriptions for them separately. Delete the location created in step 5. 9. Import the MDL file my_project.mdl. From the Metadata Import dialog, we can see the default directory for MDL file and log file has been changed to /tmp/. Here we use update metadata mode, match by names to do the importing. 10. After importing, check the description of the project MY_PROJECT, we can see the description is still there. But the description of the Oracle module ORA_MOD_1 has gone. That because we set the option UPDATEPROJECTATTRIBUTES to N, and set the option UPDATEMODULEATTRIBUTES to Y. 11. Check the log file, the log file only contains warning messages and the log message level is set to WARNING. For more details about the 3 types of status messages, see Oracle® Warehouse Builder Installation and Administration Guide11g Release 2.

Read the article

Nautilus crashes after Ubuntu Tweak Package Cleaner [fixed]

- by Ka7anax

Few days ago I started having some problems with nautilus. Basically when I'm trying to get into a folder it crashes. It's not happening all the time, but in 85% it does... Sometimes, after the crash all my desktop icons are also gone. The only thing that I think causes this is Ubuntu Tweak - I'm not sure, but the issues started after I did the Package cleaner from Ubuntu Tweaks... Any ideas? ------- EDIT 2 - IMPORTANT !!! ---------- It seems I fixed this problem doing these: 1) I uninstall this nautilus script - http://mundogeek.net/nautilus-scripts/#nautilus-send-gmail 2) I installed nautilus elementary So far is back to normal... If anything bad happens again I will come back! -------- EDIT 1 ---------- First time, after running the command (nautilus --quit; nautilus --no-desktop) 3 times all the system crashed (except the mouse, I could move the mouse). After restart I run it and obtain this: ----- Initializing nautilus-gdu extension Initializing nautilus-dropbox 0.6.7 (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertion value != NULL' failed (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertionvalue != NULL' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. and then this: cristi@cris-laptop:~$ nautilus --quit; nautilus --no-desktop (nautilus:3810): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

Read the article

Refactor This (Ugly Code)!

- by Alois Kraus

Ayende has put on his blog some ugly code to refactor. First and foremost it is nearly impossible to reason about other peoples code without knowing the driving forces behind the current code. It is certainly possible to make it much cleaner when potential sources of errors cannot happen in the first place due to good design. I can see what the intention of the code is but I do not know about every brittle detail if I am allowed to reorder things here and there to simplify things. So I decided to make it much simpler by identifying the different responsibilities of the methods and encapsulate it in different classes. The code we need to refactor seems to deal with a handler after a message has been sent to a message queue. The handler does complete the current transaction if there is any and does handle any errors happening there. If during the the completion of the transaction errors occur the transaction is at least disposed. We can enter the handler already in a faulty state where we try to deliver the complete event in any case and signal a failure event and try to resend the message again to the queue if it was not inside a transaction. All is decorated with many try/catch blocks, duplicated code and some state variables to route the program flow. It is hard to understand and difficult to reason about. In other words: This code is a mess and could be written by me if I was under pressure. Here comes to code we want to refactor: private void HandleMessageCompletion( Message message, TransactionScope tx, OpenedQueue messageQueue, Exception exception, Action<CurrentMessageInformation, Exception> messageCompleted, Action<CurrentMessageInformation> beforeTransactionCommit) { var txDisposed = false; if (exception == null) { try { if (tx != null) { if (beforeTransactionCommit != null) beforeTransactionCommit(currentMessageInformation); tx.Complete(); tx.Dispose(); txDisposed = true; } try { if (messageCompleted != null) messageCompleted(currentMessageInformation, exception); } catch (Exception e) { Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e); } return; } catch (Exception e) { Trace.TraceWarning("Failed to complete transaction, moving to error mode"+ e); exception = e; } } try { if (txDisposed == false && tx != null) { Trace.TraceWarning("Disposing transaction in error mode"); tx.Dispose(); } } catch (Exception e) { Trace.TraceWarning("Failed to dispose of transaction in error mode."+ e); } if (message == null) return; try { if (messageCompleted != null) messageCompleted(currentMessageInformation, exception); } catch (Exception e) { Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e); } try { var copy = MessageProcessingFailure; if (copy != null) copy(currentMessageInformation, exception); } catch (Exception moduleException) { Trace.TraceError("Module failed to process message failure: " + exception.Message+ moduleException); } if (messageQueue.IsTransactional == false)// put the item back in the queue { messageQueue.Send(message); } } You can see quite some processing and handling going on there. Yes this looks like real world code one did put together to make things work and he does not trust his callbacks. I guess these are event handlers which are optional and the delegates were extracted from an event to call them back later when necessary. Lets see what the author of this code did intend: private void HandleMessageCompletion( TransactionHandler transactionHandler, MessageCompletionHandler handler, CurrentMessageInformation messageInfo, ErrorCollector errors ) { // commit current pending transaction transactionHandler.CallHandlerAndCommit(messageInfo, errors); // We have an error for a null message do not send completion event if (messageInfo.CurrentMessage == null) return; // Send completion event in any case regardless of errors handler.OnMessageCompleted(messageInfo, errors); // put message back if queue is not transactional transactionHandler.ResendMessageOnError(messageInfo.CurrentMessage, errors); } I did not bother to write the intention here again since the code should be pretty self explaining by now. I have used comments to explain the still nontrivial procedure step by step revealing the real intention about all this complex program flow. The original complexity of the problem domain does not go away but by applying the techniques of SRP (Single Responsibility Principle) and some functional style but we can abstract the necessary complexity away in useful abstractions which make it much easier to reason about it. Since most of the method seems to deal with errors I thought it was a good idea to encapsulate the error state of our current message in an ErrorCollector object which stores all exceptions in a list along with a description what the error all was about in the exception itself. We can log it later or not depending on the log level or whatever. It is really just a simple list that encapsulates the current error state. class ErrorCollector { List<Exception> _Errors = new List<Exception>(); public void Add(Exception ex, string description) { ex.Data["Description"] = description; _Errors.Add(ex); } public Exception Last { get { return _Errors.LastOrDefault(); } } public bool HasError { get { return _Errors.Count > 0; } } } Since the error state is global we have two choices to store a reference in the other helper objects (TransactionHandler and MessageCompletionHandler)or pass it to the method calls when necessary. I did chose the latter one because a second argument does not hurt and makes it easier to reason about the overall state while the helper objects remain stateless and immutable which makes the helper objects much easier to understand and as a bonus thread safe as well. This does not mean that the stored member variables are stateless or thread safe as well but at least our helper classes are it. Most of the complexity is located the transaction handling I consider as a separate responsibility that I delegate to the TransactionHandler which does nothing if there is no transaction or Call the Before Commit Handler Commit Transaction Dispose Transaction if commit did throw In fact it has a second responsibility to resend the message if the transaction did fail. I did see a good fit there since it deals with transaction failures. class TransactionHandler { TransactionScope _Tx; Action<CurrentMessageInformation> _BeforeCommit; OpenedQueue _MessageQueue; public TransactionHandler(TransactionScope tx, Action<CurrentMessageInformation> beforeCommit, OpenedQueue messageQueue) { _Tx = tx; _BeforeCommit = beforeCommit; _MessageQueue = messageQueue; } public void CallHandlerAndCommit(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { if (_Tx != null && !errors.HasError) { try { if (_BeforeCommit != null) { _BeforeCommit(currentMessageInfo); } _Tx.Complete(); _Tx.Dispose(); } catch (Exception ex) { errors.Add(ex, "Failed to complete transaction, moving to error mode"); Trace.TraceWarning("Disposing transaction in error mode"); try { _Tx.Dispose(); } catch (Exception ex2) { errors.Add(ex2, "Failed to dispose of transaction in error mode."); } } } } public void ResendMessageOnError(Message message, ErrorCollector errors) { if (errors.HasError && !_MessageQueue.IsTransactional) { _MessageQueue.Send(message); } } } If we need to change the handling in the future we have a much easier time to reason about our application flow than before. After we did complete our transaction and called our callback we can call the completion handler which is the main purpose of the HandleMessageCompletion method after all. The responsiblity o the MessageCompletionHandler is to call the completion callback and the failure callback when some error has occurred. class MessageCompletionHandler { Action<CurrentMessageInformation, Exception> _MessageCompletedHandler; Action<CurrentMessageInformation, Exception> _MessageProcessingFailure; public MessageCompletionHandler(Action<CurrentMessageInformation, Exception> messageCompletedHandler, Action<CurrentMessageInformation, Exception> messageProcessingFailure) { _MessageCompletedHandler = messageCompletedHandler; _MessageProcessingFailure = messageProcessingFailure; } public void OnMessageCompleted(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { try { if (_MessageCompletedHandler != null) { _MessageCompletedHandler(currentMessageInfo, errors.Last); } } catch (Exception ex) { errors.Add(ex, "An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"); } if (errors.HasError) { SignalFailedMessage(currentMessageInfo, errors); } } void SignalFailedMessage(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { try { if (_MessageProcessingFailure != null) _MessageProcessingFailure(currentMessageInfo, errors.Last); } catch (Exception moduleException) { errors.Add(moduleException, "Module failed to process message failure"); } } } If for some reason I did screw up the logic and we need to call the completion handler from our Transaction handler we can simple add to the CallHandlerAndCommit method a third argument to the MessageCompletionHandler and we are fine again. If the logic becomes even more complex and we need to ensure that the completed event is triggered only once we have now one place the completion handler to capture the state. During this refactoring I simple put things together that belong together and came up with useful abstractions. If you look at the original argument list of the HandleMessageCompletion method I have put many things together: Original Arguments New Arguments Encapsulate Message message CurrentMessageInformation messageInfo Message message TransactionScope tx Action<CurrentMessageInformation> beforeTransactionCommit OpenedQueue messageQueue TransactionHandler transactionHandler TransactionScope tx OpenedQueue messageQueue Action<CurrentMessageInformation> beforeTransactionCommit Exception exception, ErrorCollector errors Action<CurrentMessageInformation, Exception> messageCompleted MessageCompletionHandler handler Action<CurrentMessageInformation, Exception> messageCompleted Action<CurrentMessageInformation, Exception> messageProcessingFailure The reason is simple: Put the things that have relationships together and you will find nearly automatically useful abstractions. I hope this makes sense to you. If you see a way to make it even more simple you can show Ayende your improved version as well.

Read the article

Connecting Visual Studio 2008 SP1 to TFS 2010

- by Enrique Lima

Introduction You have installed Team Foundation Server 2010, you are ready to go. Your client is Visual Studio 2008 SP1, and need to connect to TFS 2010. Here is the story, the steps to configure Team Explorer are almost the same … meaning, you will open Visual Studio, then go to Team Explorer. At that point you will Add an Existing Project, this where we connect to TFS. Except, we get this: Now what?!? We need to install the Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010. Where to get it from? TFS 2010 installation media Microsoft’s Download Center Update Installation We arrive at the Welcome Screen for the Update, click Next Next comes the license screen, accept the license, by selecting the checkbox, then click next. The installation process will start at that point. Once it completes, click on Finish. Second Try Time to attempt to connect again. We are back to working with Team Explorer, and Adding an existing project. There is a formula to be successful with this. protocol://servername:port/tfs/<name of collection> protocol = http or https servername = your tfs 2010 server port = 8080 by default, or the custom port you are using /tfs = I am assuming the default too /<name of collection = the name of the collection that was provisioned. Once the values are provided, click OK, then close. At this point you should see a listing of Projects available within the TFS 2010 collection. Select the project and click OK. You will now see this listed in Team Explorer.

Read the article

Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash

- by mseika

Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash Thursday 20th September 9.30 – 16.30 This is 1-day, face-to-face training is designed for your Storage Implementation Specialists and will help them in their path to Specialisation, as they prepare for the Storage Implementations Assessments for ZFSSA. Please read carefully the notes below on the required equipment for attendees. Agenda Module 1: Product Overview Module 2: Installation and Configuration ZFS Lab 1: Installation Module 3: Clustering Module 4: File and Data Services ZFS Lab 2: Creating Projects ZFS Lab 3: Creating a Share ZFS Lab 4: Snapshots and Clones ZFS Lab 5: CLI Overview Module 5: Maintenance ZFS Lab 6: Dashboard overview Module 6: Analytics ZFS Lab 7: Analytics Prerequisites for attendees Provide basic administration support for the Solaris OS and/or Windows Desktop/Server OS Understand the fundamentals of data storage administration Understand the fundamentals of Transmission Control Protocol/Internet Protocol (TCP/IP) networking and administration Troubleshoot server and network system software and hardware IMPORTANT: Equipment that attendees will have to bring to the class The attendees must bring their own laptops and have successfully installed the Virtual Box instance and the 7000 Series Simulator. To download Virtual Box and the Simulator click here. Attendees must have the Simulator running in advance of the class. For technical support on the download/installation of the Simulator, please send email to [email protected] Please register here

Read the article

indirect rendering issue on 12.04, using ati driver

- by lurscher

I have ubuntu 12.04 64-bit system, when i run glxinfo i see some strange error about indirect rendering and failed to load some lib32/dri/swrast_dri libraries. Any idea what is going on? please let me know if i can enhance the relevant information provided in this question $ LIBGL_DEBUG=verbose glxinfo name of display: :0 libGL: screen 0 does not appear to be DRI2 capable libGL: OpenDriver: trying /usr/lib32/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib32/dri/swrast_dri.so libGL error: dlopen /usr/lib32/dri/swrast_dri.so failed (/usr/lib32/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL: OpenDriver: trying /usr/lib/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib/dri/swrast_dri.so libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: reverting to indirect rendering display: :0 screen: 0 direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose) server glx vendor string: ATI server glx version string: 1.4 server glx extensions: GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group client glx vendor string: Mesa Project and SGI client glx version string: 1.4 client glx extensions: GLX_ARB_create_context, GLX_ARB_create_context_profile, GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_framebuffer_sRGB, GLX_EXT_create_context_es2_profile, GLX_MESA_copy_sub_buffer, GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap, GLX_INTEL_swap_event GLX version: 1.4 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_multithread_makecurrent, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 1.4 (2.1 (4.2.11762 Compatibility Profile Context)) OpenGL extensions: GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, GL_ARB_framebuffer_object, GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit, GL_EXT_framebuffer_multisample, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_ATI_draw_buffers, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_NV_texture_rectangle, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

Read the article

Fix corrupt NTFS partition without Windows

- by Capt.Nemo

MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

Read the article

Unable to download anything from the Ubuntu software center

- by Skittles

I am trying to download softwares from ubuntu software center but every time i click on "USE THIS SOURCE" i end up getting "Failed to download repository information" error! I don't understand what to do I even tried changing and adding Repository. Even tried choosing a different server. Even the "Choose best server" option doesn't choose anything. I really need help. I am new to Ubuntu and i would really appreciate some help. after trying lsb_release -a; i got pooja@Invincible:~$ lsb_release -a; No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise After trying "sudo apt-get update && sudo apt-get upgrade" i got this- W: Failed to fetch http://mirror.cse.iitk.ac.in/ubuntu/dists/precise-proposed/universe/i18n/Translation-en Something wicked happened resolving 'mirror.cse.iitk.ac.in:http' (-5 - No address associated with hostname) E: Some index files failed to download. They have been ignored, or old ones used instead.

Read the article

Troubleshooting EBS Discovery Issues - Part 2

- by Kenneth E.

Part 1 of “Troubleshooting EBS Discovery Issues”, which was posted on May 17th, focused on the diagnostics associated with the initial discovery of an EBS instances (e.g., Forms servers, APPL_TOPs, databases, etc.).Part 2 focuses on verifying parameters of the Change Management features, also called "Pack Diagnostics, specifically for Customization Manager, Patch Manager, Setup Manager, Automated Cloning, and User Monitoring. As stated in the first post, there can be numerous reasons that Discovery fails - credentials, file-level permissions, patch levels - just to name a few.The Discovery Wizard can be accessed from the EBS homepage. From the home page, click "Pack Diagnostics"Click "Create" to define the diagnostic processProvide the required inputs; Name, Module (i.e., Customization Manager, Patch Manager, Setup Manager, Automated Cloning, and User Monitoring), Show Details (typically "All"), and Category (typically check both Generic and User Specific). Add the appropriate targets.Once the diagnostic process has completed, view the results. Click on "Succeeded" or "Failed" in the Status column.Expand the entire tree and click on each "Succeeded/Failed" status to see the results of each test within that task.Sample output verifying o/s user name and required patches Additional sample output showing a failed testComplete descriptions of, as well as recommended corrective actions for, all of the diagnostic tests that are run in EM 12c is found in this spreadsheet. Additional information can be found in the Application Management Pack User Guide.

Search Results

Search found 20048 results on 802 pages for 'failed installation'.

Page 203/802 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210 | Next Page >

- by Ucodia

- by robert_d

- by fordays

- by sijith

- by Balint Pato

- by doom2.wad

- by user92516

- by pinaldave

- by Brian

- by Pasha

- by Rey Mestidio

- by Anthony Shorten

- by Artyom2033

- by kaleidoscope

- by T.Kannan

- by Jane Zhang

- by Ka7anax

- by Alois Kraus

- by Enrique Lima

- by mseika

- by lurscher

- by Capt.Nemo

- by Skittles

- by Kenneth E.

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210 | Next Page >