Search Results

Search found 35444 results on 1418 pages for 'lock down computer'.

Page 203/1418 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• how can 192.168.2.10 talk to 172.18.156.65 ?

  - by steve

  from what i understand, all computers need to be in the same subnet /24 so how would i get a computer to be able to connect to another computer that is set as 172 ? one computer is behind a firewall, the other is connected to a HUGHES sat dish and has the IP of 172 would I need to setup a ROUTE in a firewall between the 2 computers, to say "if you are trying to get to 172.18.156.65 then use the ip address 192.168.2.65 and translate it to 172.18.156.65" the firewall is a netgear, if I should use a ROUTE, then I'll try to learn it from the manual thanks

  Read the article

• Remotely Administer Workgroup Computers

  - by Steven

  At work, I can remotely administer other computers by first adding my domain account as a local admistrator on another computer. After that, I can use remote registry, computer management, and file sharing (\\computer\c$). How can I setup a remote user to be a local administrator on a simple home network without a domain (just a workgroup)?

  Read the article

• Would it be possible to swap system restore points on different brands of computers?

  - by P'sao

  So I have a ThinkPad computer that I've installed a program called "Deep Freeze" which restores your computer to the "Frozen" state. I also have a Toshiba computer with no Deep Freeze on it. My question is that would it be possible to creat a system restore point on my Toshiba and then replace the system volume information folder with the one on the ThinkPad so I could restore to a point with no Deep Freeze? Would this work?

  Read the article

• Can't install on a Thinkpad W700ds

  - by Habstinat

  I want to install Ubuntu on my computer. I don't know much about Linux, but I know my way around a terminal and whatnot. My computer, a ThinkPad W700ds, refuses to read from my CD when booting. The md5sum is correct and the same CD boots fine from another computer. When I try to install from a USB, I can get the main screen, but when I select any of the options from there my screen turns black for more than 3 hours until I have to turn it off. Is there anything I can do about this? I want to have a true partition, don't want a Wubi'd install. It's a 10.10 x64 image, but my computer is 64 bit (running Windows 7 x64 right now) and the exact same CD is bootable on other computers. I've been on #ubuntu IRC for days trying to work this out but nobody knew, so I figured I would get more responses by posting to here. UPDATE: Thanks Jorge Castro. Both the alternate and desktop installers seem to not work at all with the CD. On a USB, the alternate installer lets me start installing, but in the middle of installation I get this message. The people on #ubuntu told me to just exit installation at that point, so I did.

  Read the article

• Install Second Copy of Windows in a Partition, Block Access to other Partitions

  - by Mat

  I want to lend my computer to my flatmate so that he can play some games for which his computer is underpowered. Is it possible to install a second copy of Windows 7 into a separate partition and configure it such that it has no access to the other partitions and disks on the computer, the ones that I use in my main Windows install? I'm not concerned about security, just want to avoid him accidentially messing with my data somehow. Can I do that?

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• Installing nVidia drivers for Quadro FX 880M on 10.10 caused shutdown/startup issues.

  - by Chantz

  So I was facing weird graphics drivers issues due to the default nouveau drivers that came installed with Ubuntu 10.10 hence I installed the latest nVidia graphics drivers & I the weird graphics issues stopped happening. So far so good, but when I tried to shut down the laptop it got stuck at the window with text 15, shutting down... modem-manager: Caught signal 15, shutting down... init: Disconnected from system us init: dbus main process (1107) killed by TERM signal And this happens .everytime.without.fail. I tried updating the kernel and any/all drivers through update manager but it stil happens. Not only this even the startup screen is totally screwed up. It just displays Ubuntu 10.10 in text with 3 dots. But that is acceptable. To power cycle down the laptop each and everytime for shutdown is not cool. Same goes for when I try to restart. Interesting thing is if I try to shutdown the laptop when I am on the login screen it does so without any problems. I googled & many people seem to face the same issue but I couldn't find any silver bullet hoping to find one here.

  Read the article

• How to go about designing an intermediate routing filter program to accept input and forward accordingly?

  - by phileaton

  My predicament: I designed an app, written in Python, to read my mail and check for messages that contain a certain digital signature. It opens these and looks for keywords. If the message contains these keywords, certain related functions area executed on the computer. It is a way I can control my computer from my cell phone without being there. I am still in the beginning stages and it can only currently remotely open and close applications/processes. The obvious issue is security risks. I hoped to spearhead that by requiring and checking for that digital signature. However, my issue comes when I'd like to make this program usable by multiple users. The idea is that the user will send keywords: username and password, for instance, to log into their personal email account and send messages to it to be parsed. Please ignore the security implications of sending non-encoded passwords through email. (Though if you could help me on that part I'd much appreciate it as well, but currently, that is not the scope of my question.) My issue is designing an intermediary process that will take an email/password to read an email and scan for those keywords. The issue is, that the program has to be accessing an email to read the email for the username/password! I have got myself into a loop and cannot figure out how to have this required intermediary program. I could just create an arbitrary email account and have that check for login-creds, but is there a better way of doing this than that? Also, is there a better way of communicating with a computer remotely than this? Especially if the computer is not a server and is behind a router with only a subnet ip? If I am asking this question in the wrong place, I deeply apologize. Any help would be much appreciated!

  Read the article

• Linux browse and open network files with command line

  - by user3077066

  I'm new to Linux. I have a Windows network connected to a Linux computer. When I try to browse Windows files from windows managers in Linux, it asks for user name, work group name and password. The address of computer network is something like this: smb://computer-name/folder I want to access my network folders and files using command line. I have searched a little bit but I didn't find anything. Any suggestions? Thanks in advance

  Read the article

• Open ports broken from internal network

  - by ksvi

  Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP.

  Read the article

• systemstate dump ??

  - by JaneZhang(???)

          ???????????????hang????,????????systemstate dump?????????,?????,????????,???????????????,????systemstate dump?????????????       ??????,????????systemstate dump, ?????“WAITED TOO LONG FOR A ROW CACHE ENQUEUE LOCK”?        systemstate dump???????????,??????:??????,???????,????dump????????,???????M????)1. ?sysdba???????:$sqlplus / as sysdba??$sqlplus -prelim / as sysdba <==??????????hang?????SQL>oradebug setmypidSQL>oradebug unlimit;SQL>oradebug dump systemstate 266;?1~2??SQL>oradebug dump systemstate 266;?1~2??SQL>oradebug dump systemstate 266;SQL>oradebug tracefile_name;==>????????2. ????systemstate dump,??????hang analyze??????????????????$sqlplus / as sysdba??$sqlplus -prelim / as sysdba <==??????????hang?????SQL>oradebug setmypidSQL>oradebug unlimit;SQL>oradebug dump hanganalyze 3?1~2??SQL>oradebug dump hanganalyze 3?1~2??SQL>oradebug dump hanganalyze 3SQL>oradebug tracefile_name;==>??????????RAC???,????????????systemstate dump,???????????(?????????):$sqlplus / as sysdba??$sqlplus -prelim / as sysdba <==??????????hang?????SQL>oradebug setmypidSQL>oradebug unlimitSQL>oradebug -g all dump systemstate 266  <==-g all ??????????dump?1~2??SQL>oradebug -g all dump systemstate 266?1~2??SQL>oradebug -g all dump systemstate 266?RAC???hang analyze:SQL>oradebug setmypidSQL>oradebug unlimitSQL>oradebug -g all hanganalyze 3?1~2??SQL>oradebug -g all hanganalyze 3?1~2??SQL>oradebug -g all hanganalyze 3?????????????????systemstate dump,?????????????backgroud_dump_dest??diag trace???????????????????????????,?????hang?,?????systemstate dump?????:10:   dump11:   dump + global cache of RAC256: short stack (????)258: dump(???lock element) + short stack (????)266: 256+10 -->short stack+ dump267: 256+11 -->short stack+ dump + global cache of RAClevel 11? 267? dump global cache, ??????trace ??,??????????????,????????,???266,??????dump?????????,????????????????????short stack????,???????,??2000???,??????30??????????,????level 10 ?? level 258, level 258 ? level 10????short short stack, ??level 10?????lock element data.?????systemstate dump???,??????level?????:??????37???:-rw-r----- 1 oracle oinstall    72721 Aug 31 21:50 rac10g2_ora_31092.trc==>256 (short stack, ????2K)-rw-r----- 1 oracle oinstall  2724863 Aug 31 21:52 rac10g2_ora_31654.trc==>10    (dump,????72K )-rw-r----- 1 oracle oinstall  2731935 Aug 31 21:53 rac10g2_ora_32214.trc==>266 (dump + short stack ,????72K)RAC:-rw-r----- 1 oracle oinstall 55873057 Aug 31 21:49 rac10g2_ora_30658.trc ==>11   (dump+global cache,????1.4M)-rw-r----- 1 oracle oinstall 55879249 Aug 31 21:48 rac10g2_ora_28615.trc ==>267 (dump+global cache+short stack,????1.4M) ??,??????dump global cache(level 11?267,???????????????)??????????,?????????systemstate dump ??

  Read the article

• Problem with host-only in Virtual Box

  - by Kamiar

  Hi folks I have virtualbox software in my computer and I have windows 7 in host. my virtual has windows server 2008 and Sql server 2008 I have client SQL version in windows 7(host computer) but as you know virtualbox works in host-only network. I need Connection host to guest but I can not see virtual computer(win2008) from host (win7). Is there any solution ?

  Read the article

• How do I restore a Dell Inspiron 1521 laptop to facotry defaults

  - by Solignis

  I got a Dell Inspiron 1521 laptop from the local computer store, it is obviously a used machine. When I got it the data from the previous user was on it they did not do a wipe. Anyhow Dell was not being any help to me on wiping the data. Does anyone know how I get the machine to restore Windows to the factory settings. Also I do not have the system disc that come with the computer, I just have the computer and the power cord.

  Read the article

• Connecting PC to TV via HDMI/DVI: Windows XP doesn't allow the appropriate screen resolution

  - by Jørgen

  I have a computer that is connected to the living room TV (a Panasonic) via HDMI. There is no other monitor connected. My problem is that the computer, which is running Windows XP, does not allow me to set the proper resolution for the TV. Both the graphics adapter and the TV should support the 1280x720 resolution, but it cannot be selected - the only available options are 1280x600 and 800x600, both in the "native" Windows dialog box and the custom Intel graphics options dialog box. Do anyone have a suggestion for a solution for this? Things I've thought of: Setting the resolution directly in the registry (where?) Installing some "custom" monitor driver (the TV manufacturer does not appear to provide any, currently the "generic" one is used) Details on the setup: Connection: DVI output on the computer via a passive DVI-HDMI adapter to the HDMI input on the TV, audio is run on a separate link, the TV is able to combine video and audio without any problem, the problem is there regardless of whether or not the audio is connected. The connection is several meters long through some walls, for this reason using a VGA cable instead is not an option. Note that the report explicitly says that the TV supports 1280x720. Still, I am not allowed to select it in Graphics Options, only 1280x600 and 800x600 is available. For 800x600, there's a lot of black around the edges; for 1280x600, the screen is "zoomed" so the edges of the monitor image (like the taskbar) is not visible. Other: The computer is running Windows XP. More recent versions of Windows are not an option (I have no licence). Linux is probably not an option (some of the video streaming sites I plan to use do not support it, I think) I wrote the rest of the details below. Thanks for any help!! TV: Panasonic TX-L32X10Y, European version; a 720p 32" quite "regular" LCD TV. Allowed resolutions according to manual: Signal name: 640x480 @60HZ Horizontal frequency: 31.47 kHz Vertical frequency: 60Hz Signal name: 750/720) /60p Horizontal frequency: 45.00 kHz Vertical frequency: 60Hz Signal name: 1,125 (1,080) / 60p Horizontal frequency: 67.50 kHz Vertical frequency: 60Hz (this is exactly how the manual presents it. PC via D-SUB (VGA cable) and "regular" HDMI have more alternatives.) Messing with the "zoom" settings on the TV does not affect the available resolution options on the computer. Computer: The following is a printout from one of the graphics adapter option pages. I think it covers most of it. The computer is a Dell. INTEL(R) EXTREME GRAPHICS 2 REPORT Report Date: 04/17/2011 Report Time[hr:mm:ss]: 20:18:02 Driver Version: 6.14.10.4396 Operating System: Windows XP* Professional, Service Pack 3 (5.1.2600) Default Language: English DirectX* Version: 9.0 Physical Memory: 1021 MB Minimum Graphics Memory: 1 MB Maximum Graphics Memory: 96 MB Graphics Memory in Use: 6 MB Processor: x86 Processor Speed: 2593 MHZ Vendor ID: 8086 Device ID: 2572 Device Revision: 02 * Accelerator Information * Accelerator in Use: Intel(R) 82865G Graphics Controller Video BIOS: 2972 Current Graphics Mode: 1280 by 600 True Color (60 Hz) * Devices Connected to the Graphics Accelerator * Active Digital Displays: 1 * Digital Display * Monitor Name: Plug and Play Monitor Display Type: Digital Gamma Value: 2.20 DDC2 Protocol: Supported Maximum Image Size: Horizontal: Not Available Vertical: Not Available Monitor Supported Modes: 1280 by 720 (50 Hz) 1280 by 720 (60 Hz) Display Power Management Support: Standby Mode: Not Supported Suspend Mode: Not Supported Active Off Mode: Not Supported (disclaimer: this question was also asked at the Wikipedia Reference Desk some time ago and might show up in a Google search. I got no useful answers there.)

  Read the article

• Show image in cell based on cell value

  - by JoeM

  I am creating a weekly income comparison table. I want to compare A5 and A10 cells and display appropriate image in B7 cell. The image will be either UP or DOWN arrow (which reflects increase or decrease). I've created a formula which puts text up or down in the cell, but I don't know how to replace it with the up/down image. =IF(D77>D69, "up", IF(D77<D69, "down")) How can I do it? I know it's possible. Note: I am using Google Docs Excel, so please let me know if this cannot be done in it, but I have to use the real Excel installed on my laptop.

  Read the article

• Disabled annotation tools in Skim

  - by Kit

  Here's a portion of the toolbar in Skim In the Add Note section, why are the following tools disabled (dimmed)? Add New Highlight (A in the yellow box) Add New Underline (red line under A) Add New Strike Out (A struck out by red line) However, in the Tool Mode section, there is a drop down button (shown as active in the screenshot). To illustrate, I can select and use the Add New Underline tool, as well as the other tools I mentioned above, using the drop down button. But those tools are dimmed out in the Add Note section. Why? I have observed that the drop down button is just a duplicate of the Add Note section. Why not just enable all the buttons in the Add Note section and save the user from making an extra click just to bring down a list of tools? Is this because of some property of the presently open PDF, or what?

  Read the article

• Print job leaves queue but document isn't printed

  - by midnightstar

  I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

  Read the article

• User Group Policy in Server 2008 to set Default Profile settings

  - by Chris

  I have computers to deploy and want to apply changes to the default user policy on these PCs automatically. What's the best way to do this? Our current procedure is: Create the computer account in an OU called "Deployment" on our server Unbox the PC Login as the user who will be receiving the PC Change settings (pre-configure outlook, authorize Office, etc.) move computer account to correct OU Place the PC on the users desk. I would like to make as many of the changes in step #4 with Group Policies applied to the Deployment OU if possible since they're largely repeated for every computer. There are a dozen policies created and the computer ones apply correctly but the user policies do not. I understand this is because the end user is not in our "Deployment" OU. I don't want to apply these settings to the user at their current station just the new PC I'm working on. I believe I have the desired effect with Group Policy Loopback Replace enabled on policies that need user policies changed but this just feels wrong/inefficient/complicated to maintain. Am I doing this correctly? Is Group Policy Loopback the only way to change user accounts on one computer? What do you do to setup a user on a new PC?

  Read the article

• Suppressing iTunes Licensing Agreement for Roaming Profiles

  - by Alex Zmaczynski

  This application is stored locally from our company image we are testing, but our users are using roaming profiles and each time they log in to a different computer or the main computer they work on iTunes keeps asking them to accept the licensing agreement. Is there anyway to keep this agreement from coming up since they are not storing this information in their profile or on the computer locally? All the computers are on Windows 7 and we run a Server 2008 R2 Domain.

  Read the article

• how to serialize function depending on what instance of object calls it, if same instance call in a thread then do serialize else not

  - by LondonDreams

  I have a function which fetches and updates some record from db and I am trying to make sure each if the function is called by same instance of object(same Or different thread) then function should behave synchronized else its a call from different object instance function need not to be synchronized. I have tried it use a lock per client. That is, instead of synchronizing the method directly using explicit locking through lock objects using Map. function is like :- getAndUpdateMyHitCount(myObjId){ //go to db and get unique record by myObjId //fetch value , increment , save update } And this function may get call is same thread by different Or same object instance But as fetching and matching from Map is slow , Is there other optimized way to do this ? Found similar at this Question but dont feel that is optimized

  Read the article

• Shared memory multiprocesses

  - by poly

  I'm building an multi processes application and I need to save session ID, the sessions ID is 32 bit, and of course it can't be used twice in its lifetime, I'm currently using DB that saves all the ID in a table, and I do the following, ID table is (int key, char used(1)) //1 is used, 0 is not 1. lock table 2. get one key for one sessions 3. update used field in it to used 4. unlock After the session is finished the process use below to free key, 1. lock table 2. update used field in it to not used 4. unlock I'm really wondering whether this is a good/fast implementation. and please note it's multi processes application.

  Read the article

• Need help with the naming convention for an incremental variable [closed]

  - by iStryker

  I am using a voting module, that allows you vote either up or down [or reset]. If you vote up, the value is +1. If you vote down, the value is -1. If you vote up then down, the value is -1. I want to extend this module to allow you to vote multiple times, and the votes to be incremental. Examples Up, Up = +1, +1 = +2 Up, Up, Down = +1, +1, -1 = +1 I want to create a new boolean variable. If FALSE/NULL then use the old system +1/-1. If TRUE, voting will be incremental. What should be the name of this variable be? I feel 'incremental' is not the correct name. This module is part of an open-source project and is used on 3,177+ websites, so I want to get the naming convention right. Naturally, I'll be setting an upper and lower limit the variable be. [ie 5 & 0] Side-question: Is there a mathematics term to describe something being either +1/-1?

  Read the article

• How can I disable the network detection on Windows 7?

  - by Mad Scientist

  I have a computer running Windows 7 that shares some files on the network. This works fine for a while until for some unknown reason the computer decides that it is connected to a new, unknown public network and disables the file sharing capabilites. Nothing physically changes with the computer, it is still connected to the same network via ethernet cable. But it does misidentify the network every other day, just plugging out the ethernet cable and putting it back in leads Windows to correctly identify the work network and enabling the share again. Is there some way to stop Windows from trying to identify the network automatically, and just tell it that the network on that computer will never change?

  Read the article

• MySql transfer / update (a bit specific)

  - by Jeff

  before posting I was digging whole site but didn't find help for my problem, so I hope someone will help... Facts: 30 Gb mysql database on remote server (about 20.000.000 rows) data are once weekly updated in local network (mysql) I need to transfer/replace local updated database with remote connection is about 2mb (real mb, not mbps) up/down Point is that I can't have 'down time' of remote mysql server. Until now I Tried: navicat data sync - Ok, but take about 3 days to finish dbForge - ok but need 5 days to finish mysql dump transfer to remote server and execution - about day, but a lot of downtime rsync folder with database /mysql/lib/MY_DATABASE - 4 hours, but after that I need to execute always 'repir on remote server' which takes about 2 hours, and a lot of down time mysql dump piped from cl to directly goto server - still now satisfied many problems I could give you more things that I tried... mysql replication - slow Anyase, what is best,best way to: refresh remote mysql on weekly level and in same time to have 0 sec down time nor huge server load If you have any idea please share

  Read the article

• Sharing RAM resources between 2 or more computers

  - by davee44

  I know there was a somewhat similar question before: How to share CPU or RAM? But, let me just specify it a little more... When Microsoft Windows requires more RAM capacity than available it uses a swap-file to temporarily store the data there, this is actually something like a hard-drive-based RAM. This technology is used for many years. Theoretically, it shouldn't be too hard to implement a similar technology that uses the RAM of different computer(s) in the network for temporary data storage. This just requires a software that runs on computers in the network that accepts and returns data from/to the main computer and keep that data in the RAM; plus the operation system of the main computer must have the ability to use computers in the network instead of (or in addition to) the swap-file. I wonder, are there any implementations of this idea? This would allow users to build RAM clusters using all of their home or office computers, that will boost the performance of a single computer for some development/gaming/video tasks, etc.

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >