Search Results

Search found 16948 results on 678 pages for 'static analysis'.

Page 203/678 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• Configuring Linux Network

  - by Reiler

  Hi I'm working on some software, that runs on a Centos 5.xx installation. I'ts not allowed for our customers to log in to Linux, everything is done from Windows applications, developed by us. So we have build a frontend for the user to configure network setup: Static/DHCP, ip-address, gateway, DNS, Hostname. Right now I let the user enter the information in the Windows app, and then write it on the Linux server like this: Write to /etc/resolv.conf: Nameserver Write to /etc/sysconfig/network: Gateway and Hostname Write to /etc/sysconfig/network-scripts/ifcfg-eth0: Ipaddress, Netmask, Bootproto(DHCP or Static) I also (after some time) found out that I was unable to send mail, unless I wrote in /etc/hosts: 127.0.0.1 Hostname All this seems to work, but is there a better/easier way to do this? Also, I read the network configuration nearly the same way, but if I use DHCP, I miss som information, for instance the Ip-address. I know that I can get some information from the commandline (ifconfig), but I dont get for instance Hostname, Gateway and DNS. Is there a commandline tool that will display this?

  Read the article

• How should I structure moving from overworld to menu system / combat?

  - by persepolis

  I'm making a text-based "Arena" game where the player is the owner of 5 creatures that battle other teams for loot, experience and glory. The game is very simple, using Python and a curses emulator. I have a static ASCII map of an "overworld" of sorts. My character, represented by a glyph, can move about this static map. There are locations all over the map that the character can visit, that break down into two types: 1) Towns, which are a series of menus that will allow the player to buy equipment for his team, hire new recruits or do other things. 2) Arenas, where the player's team will have a "battle" interface with actions he can perform, messages about the fight, etc. Maybe later, an ASCII representation of the fight but for now, just screens of information with action prompts. My main problem is what kind of design or structure I should use to implement this? Right now, the game goes through a master loop which waits for keyboard input and then moves the player about the screen. My current thinking is this: 1) Upon keyboard input, the Player coordinates are checked against a list of Location objects and if the Player coords match the Location coords then... 2) ??? I'm not sure if I should then call a seperate function to initiate a "menu" or "combat" mode. Or should I create some kind of new GameMode object that contains a method itself for drawing the screen, printing the necessary info? How do I pass my player's team data into this object? My main concern is passing around the program flow into all these objects. Should I be calling straight functions for different parts of my game, and objects to represent "things" within my game? I was reading about the MVC pattern and how this kind of problem might benefit - decouple the GUI from the game logic and user input but I have no idea how this applies to my game.

  Read the article

• Is acoustic fingerprinting too broad for one audio file only?

  - by IBG

  We were looking for some topics related to audio analysis and found acoustic fingerprinting. As it is, it seems like the most famous application for it is for identification of music. Enter our manager, who requested us to research and possible find an algorithm or existing code that we can use for this very simple approach (like it's easy, source codes don't show up like mushrooms): Always-on app for listening Compare the audio patterns to a single audio file (assume sound is a simple beep) If beep is detected, send notification to server With a flow this simple, do you think acoustic fingerprinting is a broad approach to use? Should we stop and take another approach? Where to best start? We haven't started anything yet (on the development side) on this regard, so I want to get other opinion if this is pursuit is worth it or moot.

  Read the article

• LinuxCon North America 2014

  - by Chris Kawalek

  As the first day of LinuxCon North America 2014 draws to a close, we want to thank all the folks that stopped by our booth today! If you're at the show, please stop by our booth #204 and have a chat with our experts. And you won't want to miss these Linux and virtualization related sessions coming up tomorrow and Friday: Thursday Aug 21 - Static Analysis in the Linux Kernel Using Smatch - Dan Carpenter, Oracle Friday Aug 22 - The Proper Care of Feeding of MySQL Database for Linux Admins Who Also Have DBA duties - Morgan Tocker, Oracle Friday Aug 22 - Why Use Xen for Large Scale Enterprise Deployments, Konrad Rzeszutek Wilk , Oracle We look forward to meeting with you and we hope you enjoy the rest of LinuxCon North America 2014! 

  Read the article

• Good design for class with similar constructors

  - by RustyTheBoyRobot

  I was reading this question and thought that good points were made, but most of the solutions involved renaming one of the methods. I am refactoring some poorly written code and I've run into this situation: public class Entity { public Entity(String uniqueIdentifier, boolean isSerialNumber) { if (isSerialNumber) { this.serialNumber = uniqueIdentifier; //Lookup other data } else { this.primaryKey = uniqueIdentifier; // Lookup other data with different query } } } The obvious design flaw is that someone needed two different ways to create the object, but couldn't overload the constructor since both identifiers were of the same type (String). Thus they added a flag to differentiate. So, my question is this: when this situation arises, what are good designs for differentiating between these two ways of instantiating an object? My First Thoughts You could create two different static methods to create your object. The method names could be different. This is weak because static methods don't get inherited. You could create different objects to force the types to be different (i.e., make a PrimaryKey class and a SerialNumber class). I like this because it seems to be a better design, but it also is a pain to refactor if serialNumber is a String everywhere else.

  Read the article

• Power View Infrastructure Configuration and Installation: Step-by-Step and Scripts

  This document contains step-by-step instructions for installing and testing the Microsoft Business Intelligence infrastructure based on SQL Server 2012 and SharePoint 2010, focused on SQL Server 2012 Reporting Services with Power View. This document describes how to completely install the following scenarios: a standalone instance of SharePoint and Power View with all required components; a new SharePoint farm with the Power View infrastructure; a server with the Power View infrastructure joined to an existing SharePoint farm; installation on a separate computer of client tools; installation of a tabular instance of Analysis Services on a separate instance; and configuration of single sign-on access for double-hop scenarios with and without Kerberos. Scripts are provided for all/most scenarios.

  Read the article

• Can connect to WAN via PC but router doesnt.

  - by user16877

  I have a very strange problem regarding the office network. We are currenltly in a executive suite and when i connect to wan via ethernet cable i get dhcp assigned IP address in my network config. I hooked up the linksys router to the wall expecting it to receive all the necessary ip info but that didnt work. So we have been assigned static ip address to put in to our router later but even with the static ip router doesnt seem to connect to internet. But using the same ip address and assigning to laptop works. I m very puzzled what might be the cause of this so any help is really appreciated.

  Read the article

• How to avoid “The web server process that was being debugged has been terminated by IIS”

  - by ybbest

  Problem: When debugging asp.net by attaching w3wp.exe process, you often will see encounter the following error message, the web server process that was being debugged has been terminated by IIS. Analysis: This caused Internet Information Services (IIS) to assume that the worker process had stopped responding. Therefore, IIS terminated the worker process. Solution: 1. Open IIS manager. 2.Click application Pools>>select the application pool associated with the site>>and click Advanced Settings 3. Click Advanced Settings of the application pool and set the Ping Enabled property from True to False. Now, reattach the process from Visual Studio, you should not get the error message. References: msdn

  Read the article

• How to install PyQt on Mac OS X 10.6

  - by Albert

  I want to install PyQt. This seems kind of complicated to install on OS X. I haven't found any precompiled packages of it (are there any? I would really prefer those). So I downloaded PyQt. And SIP, because it depends on that. These files: http://www.riverbankcomputing.co.uk/static/Downloads/PyQt4/PyQt-mac-gpl-4.7.3.tar.gz http://www.riverbankcomputing.co.uk/static/Downloads/sip4/sip-4.10.2.tar.gz Did a python configure.py && make && sudo make install on SIP -- installed without any problems. Tried the same on PyQt -- and failed of course: /Library/Frameworks/QtCore.framework/Headers/qglobal.h:288:2: error: #error "You are building a 64-bit application, but using a 32-bit version of Qt. Check your build configuration." Ok, so I tried with python configure.py --use-arch=i386. Same error. Any idea?

  Read the article

• World Location issues with camera and particle

  - by Joe Weeks

  I have a bit of a strange question, I am adapting the existing code base including the tile engine as per the book: XNA 4.0 Game Development by example by Kurt Jaegers, particularly the aspect that I am working on is the part about the 2D platformer in the last couple of chapters. I am creating a platformer which has a scrolling screen (similar to an old school screen chase), I originally did not have any problems with this aspect as it is simply a case of updating the camera position on the X axis with game time, however I have since added a particle system to allow the players to fire weapons. This particle shot is updated via the world position, I have translated everything correctly in terms of the world position when the collisions are checked. The crux of the problem is that the collisions only work once the screen is static, whilst the camera is moving to follow the player, the collisions are offset and are hitting blocks that are no longer there. My collision for particles is as follows (There are two vertical and horizontal): protected override Vector2 horizontalCollisionTest(Vector2 moveAmount) { if (moveAmount.X == 0) return moveAmount; Rectangle afterMoveRect = CollisionRectangle; afterMoveRect.Offset((int)moveAmount.X, 0); Vector2 corner1, corner2; // new particle world alignment code. afterMoveRect = Camera.ScreenToWorld(afterMoveRect); // end. if (moveAmount.X < 0) { corner1 = new Vector2(afterMoveRect.Left, afterMoveRect.Top + 1); corner2 = new Vector2(afterMoveRect.Left, afterMoveRect.Bottom - 1); } else { corner1 = new Vector2(afterMoveRect.Right, afterMoveRect.Top + 1); corner2 = new Vector2(afterMoveRect.Right, afterMoveRect.Bottom - 1); } Vector2 mapCell1 = TileMap.GetCellByPixel(corner1); Vector2 mapCell2 = TileMap.GetCellByPixel(corner2); if (!TileMap.CellIsPassable(mapCell1) || !TileMap.CellIsPassable(mapCell2)) { moveAmount.X = 0; velocity.X = 0; } return moveAmount; } And the camera is pretty much the same as the one in the book... with this added (as an early test). public static void Update(GameTime gameTime) { position.X += 1; }

  Read the article

• SQL Server Data Tools–BI for Visual Studio 2013 Re-released

  - by Greg Low

  Customers used to complain that the tooling for creating BI projects (Analysis Services MD and Tabular, Reporting Services, and Integration services) has been based on earlier versions of Visual Studio than the ones they were using for their other work in Visual Studio (such as C#, VB, and ASP.NET projects). To alleviate that problem, the shipment of those tools has been decoupled from the shipment of the SQL Server product. In SQL Server 2014, the BI tooling isn’t even included in the released version of SQL Server. This allows the team to keep up-to-date with the releases of Visual Studio. A little while back, I was really pleased to see that the Visual Studio 2013 update for SSDT-BI (SQL Server Data Tools for Business Intelligence) had been released. Unfortunately, they then had to be withdrawn. The good news is that they’re back and you can get the latest version from here: http://www.microsoft.com/en-us/download/details.aspx?id=42313

  Read the article

• Make iMovie text overlay remain on screen after in-transition

  - by Kit

  My idea of a text overlay has the following timeline: In-transition Static display Out-transition For this project, I am particularly fond of iMovie's Organic Main text overlay. I want it to display for an extended period. The problem is, when I set its display time for 3:20 (minutes:seconds), it performs its transition over the whole period. The text would won't be fully seen until the next 3 minutes. This is what I want: In-transition for 1 second Static display for 3:18 minutes Out-transition for 1 second Is that possible with iMovie?

  Read the article

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• Is there a name for the Builder Pattern where the Builder is implemented via interfaces so certain parameters are required?

  - by Zipper

  So we implemented the builder pattern for most of our domain to help in understandability of what actually being passed to a constructor, and for the normal advantages that a builder gives. The one twist was that we exposed the builder through interfaces so we could chain required functions and unrequired functions to make sure that the correct parameters were passed. I was curious if there was an existing pattern like this. Example below: public class Foo { private int someThing; private int someThing2; private DateTime someThing3; private Foo(Builder builder) { this.someThing = builder.someThing; this.someThing2 = builder.someThing2; this.someThing3 = builder.someThing3; } public static RequiredSomething getBuilder() { return new Builder(); } public interface RequiredSomething { public RequiredDateTime withSomething (int value); } public interface RequiredDateTime { public OptionalParamters withDateTime (DateTime value); } public interface OptionalParamters { public OptionalParamters withSeomthing2 (int value); public Foo Build ();} public static class Builder implements RequiredSomething, RequiredDateTime, OptionalParamters { private int someThing; private int someThing2; private DateTime someThing3; public RequiredDateTime withSomething (int value) {someThing = value; return this;} public OptionalParamters withDateTime (int value) {someThing = value; return this;} public OptionalParamters withSeomthing2 (int value) {someThing = value; return this;} public Foo build(){return new Foo(this);} } } Example of how it's called: Foo foo = Foo.getBuilder().withSomething(1).withDateTime(DateTime.now()).build(); Foo foo2 = Foo.getBuilder().withSomething(1).withDateTime(DateTime.now()).withSomething2(3).build();

  Read the article

• Hiding "Syntax OK" from apache2ctl output

  - by Oscar Barrett

  I am checking whether a particular apache module is installed using apache2ctl -M. When listing the modules, apache runs a syntax check on the configuration files which prints out "Syntax OK" if everything is fine. However, this message doesn't seem to be coming from STDOUT or STDERR as it shows even if all output is redirected to /dev/null. i.e. $ sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) ... Syntax OK $ sudo apache2ctl -M >/dev/null Syntax OK How is this being outputted, and is it possible to hide?

  Read the article

• Trying to get DNS services running on Windows Server 2008 R2, what am I getting wrong ?

  - by LaserBeak

  Ok, So I am basically trying to get a home server pc up that will provide Domain name services, act as Mail server and web server. I have one static IP, well it's not officially static but hasn't changed in two years so I'll call it static. I have done the following: Configured router NAT/virtual port forward UDP/TCP port 53 to the internal IP of my server 192.168.1.16, in adapter settings specified the manual settings: 192.168.1.16 IP, gateway 192.168.1.1, Subnet: 255.255.255.0 and loopback DNS: 127.0.0.1 Using my public my public IP Checked using http://www.canyouseeme.org/ that port 53 is open and is not being blocked by my ISP. It can see services on this port. Registered Domain name (mydomain.com.au) Updated whois database through the domain registrars site and registered NameServer names: ns0.mydomain.com.au and ns2.mydomain.com.au, both have been associated with my single public IP. (Waited 24 hours) Update the nameserver for mydomain.com.au: primary ns0.mydomain.com.au secondary: ns2.mydomain.com.au (waited 24+ hours) Installed Server 2008 R2, install web server role and DNS role. Webserver works when I enter my public IP into browser of any PC/mobile, get IIS7 welcome page. In DNS server: Created new forward lookup zone: ; ; Database file mydoman.com.au.dns for mydomain.com.au zone. ; Zone version: 10 ; @ IN SOA mydomain.com.au. mydomain.testdomain.com. ( 10 ; serial number 900 ; refresh 600 ; retry 86400 ; expire 3600 ) ; default TTL ; ; Zone NS records ; @ NS ns0.mydomain.com.au. @ NS ns1.mydomain.com.au. ; ; Zone records ; @ A 192.168.1.16 www A 192.168.1.16 The Domain name services will however not work, the whois database updated with ns0.mydomain.com.au etc. but when I type in my site name www.mydomain.com.au from an external machine it will not open site and I can't even ping it (Can't find host) When I check the ns0.mydomain.com.au NS record using a tool Like: http://www.squish.net/dnscheck/ I get: Security: Server ns0.mydomain.com.au (XXX.XXX.XXX.XX <- my public IP) is recursive Domain exists but there is no such record Any ideas, thanks...

  Read the article

• How to remove the last character from Stringbuilder

  - by hmloo

  We usually use StringBuilder to append string in loops and make a string of each data separated by a delimiter. but you always end up with an extra delimiter at the end. This code sample shows how to remove the last delimiter from a StringBuilder. using System; using System.Collections.Generic; using System.Text; using System.Linq; class Program { static void Main() { var list =Enumerable.Range(0, 10).ToArray(); StringBuilder sb = new StringBuilder(); foreach(var item in list) { sb.Append(item).Append(","); } sb.Length--;//Just reduce the length of StringBuilder, it's so easy Console.WriteLine(sb); } } //Output : 0,1,2,3,4,5,6,7,8,9 Alternatively,  we can use string.Join for the same results, please refer to blow code sample. using System; using System.Collections.Generic; using System.Text; using System.Linq; class Program { static void Main() { var list = Enumerable.Range(0, 10).Select(n => n.ToString()).ToArray(); string str = string.Join(",", list); Console.WriteLine(str); } }

  Read the article

• What's an acceptable "Avg. Page Load Time"?

  - by hawbsl

  Is there any industry rule of thumb for what's considered an unacceptable load time v. an OK one v. a blistering fast one? We're just reviewing some Google Analytics data and getting 0.74 Avg. Page Load Time reported. I guess that's OK. However it would be good if some meatier comparison data were available, or a blog post, or somewhere where there's some analysis of what speeds are generally being achieved by various kinds of sites. Any useful links to help someone interpret these speeds? If you Google it you just get a lot of results dealing with how to improve your speed. We're not at that stage yet.

  Read the article

• Do I need to recompile PHP to make use of CURL API?

  - by amn

  I have both Apache and PHP set up manually, albeit the latter without CURL. There is this jungle of instructions and explanations on extensions for PHP. I have a very straightforward question - what do I need to do to enable CURL in a more dynamic way. I resent the idea of static linking, in fact I hate and avoid static linking like the plague. Is it possible to have my Apache and PHP understand that there is CURL in town? I can compile CURL if necessary. Package management may be out of the question, because I built PHP myself - I am on Ubuntu, and it does not provide PHP without Suhosin and a a whole lot of time, so I removed it and built PHP myself. The whole slew of related questions simply propse installing "php5-curl" package, which is exactly one thing I CANNOT do since it installs it in a completely unrelated directory, which my PHP does not even seem to bother linking to.

  Read the article

• Latest EMEA Partner Success Stories (21st November)

  - by swalker

  Be Recognised Through Partner Success Stories You can showcase your capabilities in Oracle products and industries through partner success stories that are published on Oracle.com, and benefit from the traffic on our portal. To participate, you are required to complete a form and inform us of a successfully implemented project. If your story is selected, we will contact you for an interview. Click here to access the form and submit your success story. The latest customer success snapshots with partners being uploaded on to Oracle.com are: Robur S.p.A. Telenor LinkPlus A.S. Urals Power Engineering Company Bochemie Group Mediaset S.p.A Landbrokes Coeclerici S.p.A. IDS GmbH -Analysis and Reporting Services Teatre Nacional de Catalunya LinkPlus A.S. Scottish Water LH Dienstbekleidungs GmbH Champion Europe SpA  Metropolitan Housing Partnership McKesson Robur Learn more about our partner and customer successes by browsing the many EMEA Success Stories across all industries here.

  Read the article

• Is a yobibit really a meaningful unit? [closed]

  - by Joe

  Wikipedia helpfully explains: The yobibit is a multiple of the bit, a unit of digital information storage, prefixed by the standards-based multiplier yobi (symbol Yi), a binary prefix meaning 2^80. The unit symbol of the yobibit is Yibit or Yib.1[2] 1 yobibit = 2^80 bits = 1208925819614629174706176 bits = 1024 zebibits[3] The zebi and yobi prefixes were originally not part of the system of binary prefixes, but were added by the International Electrotechnical Commission in August 2005.[4] Now, what in the world actually takes up 1,208,925,819,614,629,174,706,176 bits? The information content of the known universe? I guess this is forward thinking -- maybe astrophyics or nanotech, or even DNA analysis really will require these orders of magnitude. How far off do you think all this is? Are these really meaningful units?

  Read the article

• Enterprise Portal Issue with the Ax Demo VPCs

  - by ssmantha

  Microsoft’s Ax Demo VPC is basically configured for a static IP address 192.168.0.1, this is due to the fact that the VPC has Domain Controlller configured in it which requires a static IP. When we put this VPC on a network with a different subnet and change the IP you can observer that the site http://sharepoint and http://sharepoint/EP cease to function and show “Page Not Found” errors in the browser. This is mainly due to the DNS configuration which is not updated. Below is the screen shot of the changes that needs to be done to make the site functioning properly. Change the following entries in the Forward Lookup Zones of DNS management: These websites default, SharePoint and projectserver are all mapped to a single port in the IIS i.e. port number 80. These websites are recognised with host headers. These host headers are configured in DNS with incorrect IP address entries in DNS when you change the IP address of the VPC. Just change these values to point to the Local Loop Adapter (127.0.0.1) and change the DNS to point to this address in the TCP/IP properties as shown below: This will resolve the issue with the website rendering. Initially you may get time out errors while browsing these website. be patient and try again this would work.

  Read the article

• Do all domains on the same shared hosting server have the same IP or ID

  - by silow

  Here's what I've got: siteA.com and siteB.com are hosted on hostgator. They're hosted on the same account of a shared hosting server (not VPS or dedicated). script.php is an external site that each of these 2 sites are accessing. I noticed that when siteA.com or siteB.com access the outside script.php, the script identifies them both as 1a.12.12ab.static.theplanet.com (apparently because hostgator uses theplanet.com servers). The fact that they're identified as the same value isn't surprising because after all they're hosted on the same account /home/user123/public_html. What I'm wondering about is how about other websites that are hosted on the same shared hosting server, but under other accounts. Basically other websites that are under another developer's control, but just happen to share the same hardware (hosting server). Do they also have the exact same identifier 1a.12.12ab.static.theplanet.com or that changes by account?

  Read the article

• Renaming Nginx 1.3.5 Server: response header

  - by Ryan

  In nginx 1.2 & 1.3 you can modify the source to change the name: src/http/ngx_http_header_filter_module.c (lines 48 and 49): static char ngx_http_server_string[] = "Server: Not Nginx" CRLF; static char ngx_http_server_full_string[] = "Server: Not Nginx/1.0" CRLF; Renaming those and recompiling the source changes the server response name in nginx 1.2. However doing this in 1.3 does not seem to change the name. It still says nginx/1.3.5 and with server_tokens off; it just says nginx. How can I change the server name in 1.3 without installing the 3rd party addon headers more? I want to compile from source.

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >