Search Results

Search found 7374 results on 295 pages for 'strange behaviour'.

Page 203/295 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

  • forEach and Facelets - a bugfarm just waiting for harvest

    - by Duncan Mills
    An issue that I've encountered before and saw again today seems worthy of a little write-up. It's all to do with a subtle yet highly important difference in behaviour between JSF 2 running with JSP and running on Facelets (.jsf pages). The incident I saw today can be seen as a report on the ADF EMG bugzilla (Issue 53) and in a blog posting by Ulrich Gerkmann-Bartels who reported the issue to the EMG. Ulrich's issue nicely shows how tricky this particular gochya can be. On the surface, the problem is squarely the fault of MDS but underneath MDS is, in fact, innocent. To summarize the problem in a simpler testcase than Ulrich's example, here's a simple fragment of code: <af:forEach var="item" items="#{itemList.items}"> <af:commandLink id="cl1" text="#{item.label}" action="#{item.doAction}"  partialSubmit="true"/> </af:forEach> Looks innocent enough right? We see a bunch of links printed out, great. The issue here though is the id attribute. Logically you can kind of see the problem. The forEach loop is creating (presumably) multiple instances of the commandLink, but only one id is specified - cl1. We know that IDs have to be unique within a JSF component tree, so that must be a bad thing?  The problem is that JSF under JSP implements some hacks when the component tree is generated to transparently fix this problem for you. Behind the scenes it ensures that each instance really does have a unique id. Really nice of it to do so, thank you very much. However, (you could see this coming), the same is not true when running with Facelets  (this is under 11.1.2.n)  in that case, what you put for the id is what you get, and JSF does not mess around in the background for you. So you end up with a component tree that contains duplicate ids which are only created at runtime.  So subtle chaos can ensue.  The symptoms are wide and varied, from something pretty obscure such as the combination Ulrich uncovered, to something as frustrating as your ActionListener just not being triggered. And yes I've wasted hours on just such an issue.  The Solution  Once you're aware of this one it's really simple to fix it, there are two options: Remove the id attribute on components that will cause some kind of submission within the forEach loop altogether and let JSF do the right thing in generating them. Then you'll be assured of uniqueness. Use the var attribute of the loop to generate a unique id for each child instance.  for example in the above case: <af:commandLink id="cl1_#{item.index}" ... />.  So one to watch out for in your upgrades to JSF 2 and one perhaps, for your coding standards today to prepare you for. For completeness, here's the reference to the underlying JSF issue that's at the heart of this: JAVASERVERFACES-1527

    Read the article

  • ArchBeat Link-o-Rama for 11/17/2011

    - by Bob Rhubart
    Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c | Richard Rotter Richard Rotter demonstrates "how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing." Article: Social + Lean = Agile | Dave Duggal In today’s increasingly dynamic business environment, organizations must continuously adapt to survive. Change management has become a major bottleneck. Organizations’ need a practical mechanism for managing controlled variance and change in-flight to break the logjam. This paper provides a foundation for applying lean and agile principles to achieve Enterprise Agility through social collaboration. Stress Testing Java EE 6 Applications - Free Article In Free Java Magazine : Adam Bien "It is strange," says Adam Bien, "everyone is obsessed about green bars and code coverage, but testing of multi threaded behavior is widely ignored - until the applications run into massive problems." Using Access Manager to Secure Applications Deployed on WebLogic | Rene van Wijk Another great how-to post from Oracle ACE Rene van Wijk, this time involving JBoss RichFaces, Facelets, Oracle Coherence, and Oracle WebLogic Server. DOAG 2011 vs. Devoxx - Value and Attraction | Markus Eisele Oracle ACE Director Markus Eisele compares and contrasts these popular conferences with the aim of helping others decide which to attend. SOA All the Time; Architects in AZ; Clearing Info Integration hurdles SOA all the Time; Architects in AZ; Clearing Info Integration Hurdles This week on the Architect Home Page on OTN. Webcast: Oracle Business Intelligence Mobile Event Date: Wednesday, December 7, 2011 Time: 10 a.m. PT/1 p.m. ET Featuring Manan Goel (Director BI Product Marketing, Oracle) and Shailesh Shedge (Director BI and Analytics Practice, Ascentt). Webcast: Maximum Availability on Private Clouds A discussion of Oracle’s Maximum Availability Architecture, Oracle Database 11g, Oracle Exadata Database Machine, and Oracle Database appliance, featuring Margaret Hamburger (Director, Product Marketing, Oracle) and Joe Meeks (Director, Product Management, Oracle). November 30, 2011 at 10:00am PT / 1:00pm ET. Oracle Technology Network Architect Day - Phoenix, AZ Wednesday December 14, 2011, 8:30am - 5:00pm. The Ritz-Carlton, Phoenix, 2401 East Camelback Road, Phoenix, AZ 85016. Registration is free, but seating is limited.

    Read the article

  • Development-led security vs administration-led security in a software product?

    - by haylem
    There are cases where you have the opportunity, as a developer, to enforce stricter security features and protections on a software, though they could very well be managed at an environmental level (ie, the operating system would take care of it). Where would you say you draw the line, and what elements do you factor in your decision? Concrete Examples User Management is the OS's responsibility Not exactly meant as a security feature, but in a similar case Google Chrome used to not allow separate profiles. The invoked reason (though it now supports multiple profiles for a same OS user) used to be that user management was the operating system's responsibility. Disabling Web-Form Fields A recurrent request I see addressed online is to have auto-completion be disabled on form fields. Auto-completion didn't exist in old browsers, and was a welcome feature at the time it was introduced for people who needed to fill in forms often. But it also brought in some security concerns, and so some browsers started to implement, on top of the (obviously needed) setting in their own preference/customization panel, an autocomplete attribute for form or input fields. And this has now been introduced into the upcoming HTML5 standard. For browsers that do not listen to this attribute, strange hacks* are offered, like generating unique IDs and names for fields to avoid them from being suggested in future forms (which comes with another herd of issues, like polluting your local auto-fill cache and not preventing a password from being stored in it, but instead probably duplicating its occurences). In this particular case, and others, I'd argue that this is a user setting and that it's the user's desire and the user's responsibility to enable or disable auto-fill (by disabling the feature altogether). And if it is based on an internal policy and security requirement in a corporate environment, then substitute the user for the administrator in the above. I assume it could be counter-argued that the user may want to access non-critical applications (or sites) with this handy feature enabled, and critical applications with this feature disabled. But then I'd think that's what security zones are for (in some browsers), or the sign that you need a more secure (and dedicated) environment / account to use these applications. * I obviously don't deny the ingeniosity of the people who were forced to find workarounds, just the necessity of said workarounds. Questions That was a tad long-winded, so I guess my questions are: Would you in general consider it to be the application's (hence, the developer's) responsiblity? Where do you draw the line, if not in the "general" case?

    Read the article

  • ASP.NET Membership Password Hash -- .NET 3.5 to .NET 4 Upgrade Surprise!

    - by David Hoerster
    I'm in the process of evaluating how my team will upgrade our product from .NET 3.5 SP1 to .NET 4. I expected the upgrade to be pretty smooth with very few, if any, upgrade issues. To my delight, the upgrade wizard said that everything upgraded without a problem. I thought I was home free, until I decided to build and run the application. A big problem was staring me in the face -- I couldn't log on. Our product is using a custom ASP.NET Membership Provider, but essentially it's a modified SqlMembershipProvider with some additional properties. And my login was failing during the OnAuthenticate event handler of my ASP.NET Login control, right where it was calling my provider's ValidateUser method. After a little digging, it turns out that the password hash that the membership provider was using to compare against the stored password hash in the membership database tables was different. I compared the password hash from the .NET 4 code line, and it was a different generated hash than my .NET 3.5 code line. (Tip -- when upgrading, always keep a valid debug copy of your app handy in case you have to step through a lot of code.) So it was a strange situation, but at least I knew what the problem was. Now the question was, "Why was it happening?" Turns out that a breaking change in .NET 4 is that the default hash algorithm changed to SHA256. Hey, that's great -- stronger hashing algorithm. But what do I do with all the hashed passwords in my database that were created using SHA1? Well, you can make two quick changes to your app's web.config and everything will be OK. Basically, you need to override the default HashAlgorithmTypeproperty of your membership provider. Here are the two places to do that: 1. At the beginning of your element, add the following element: <system.web> <machineKey validation="SHA1" /> ... </system.web> 2. On your element under , add the following hashAlgorithmType attribute: <system.web> <membership defaultProvider="myMembership" hashAlgorithmType="SHA1"> ... </system.web> After that, you should be good to go! Hope this helps.

    Read the article

  • What type of interview questions should you ask for "legacy" programmers?

    - by Marcus Swope
    We have recently been receiving lots of applicants for our open developer positions from people who I like to refer to as "legacy" programmers. I don't like the term "old" because it seems a little prejudiced (especially to HR!) and it doesn't accurately reflect what I mean. We are a company that does primarily .NET development using TDD in an Agile environment, we use Git as a source control system, we make heavy use of OSS tools and projects and we contribute to them as well, we have a strong bias towards adhering to strong Object-Oriented principles, SOLID, etc, etc, etc... Now, the normal list of questions that we ask doesn't really seem to apply to applicants that are fresh out of school, nor does it seem to apply to these "legacy" programmers. Here is how I (loosely) define a "legacy" programmer. Spent a significant amount of their career working almost exclusively with Assembly/Machine Languages. Primary accomplishments include work done with TANDEM systems. Has extensive experience with technologies like FoxPro and ColdFusion It's not that we somehow think that what we do is "better" than what they do, on the contrary, we respect these types of applicants and we are scared that we may be missing a good candidate. It is just very difficult to get a good read on someone who is essentially speaking a different language than you. To someone like this, it seems a little strange to ask a question like: What is the difference between an abstract class and an interface? Because, I would think that they would almost never know the answer or even what I'm talking about. However, I don't want to eliminate someone who could be a very good candidate in their own right and could be able to eventually learn the stuff that we do. But, I also don't want to just ask a bunch of behavioral questions, because I want to know about their technical background as well. Am I being too naive? Should "legacy" programmers like this already know about things like TDD, source control strategies, and best practices for object-oriented programming? If not, what questions should we ask to get a good representation about whether or not they are still able to learn them and be able to keep up in our fast-paced environment? EDIT: I'm not concerned with whether or not applicants that meet these criteria are in general capable or incapable, as I have already stated that I believe that they can be 100% capable. I am more interested in figuring out how to evaluate their talents, as I am having a hard time figuring out how to determine if they are an A+ "legacy" programmer or if they are a D- "legacy" programmer. I've worked with both.

    Read the article

  • GParted detects entire disk as UNALLOCATED SPACE + hd0 out of disk

    - by msPeachy
    Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows. After 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu again but still I get the same hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but since GParted or the Ubuntu installer itself does not recognize my partitions and shows the entire disk as unallocated space, I decided not to continue. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk! UPDATE I think I might know the problem. The total sectors of sda is 625142448 but the extended partition (sda4) ends at 625153409. Now, my question is, how do I fix this or modify the extended partition (sda4) to matched the total number of sectors? Anyone, please??? UPDATE I was able to fix the unallocated space issue with the help of Rod Smith's tool called fixparts I am now able to view my partitions via GParted in LiveUSB. But the error: hd0 out of disk. Press any key to continue... still persists on reboot. I still can't boot into Ubuntu. Can someone help me please???

    Read the article

  • MiniMax function throws null pointer exception

    - by Sven
    I'm working on a school project, I have to build a tic tac toe game with the AI based on the MiniMax algorithm. The two player mode works like it should. I followed the code example on http://ethangunderson.com/blog/minimax-algorithm-in-c/. The only thing is that I get a NullPointer Exception when I run the code. And I can't wrap my finger around it. I placed a comment in the code where the exception is thrown. The recursive call is returning a null pointer, what is very strange because it can't.. When I place a breakpoint on the null return with the help of a if statement, then I see that there ARE still 2 to 3 empty places.. I probably overlooking something. Hope someone can tell me what I'm doing wrong. Here is the MiniMax code (the tic tac toe code is not important): /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package MiniMax; import Game.Block; import Game.Board; import java.util.ArrayList; public class MiniMax { public static Place getBestMove(Board gameBoard, Block.TYPE player) { Place bestPlace = null; ArrayList<Place> emptyPlaces = gameBoard.getEmptyPlaces(); Board newBoard; //loop trough all the empty places for(Place emptyPlace : emptyPlaces) { newBoard = gameBoard.clone(); newBoard.setBlock(emptyPlace.getRow(), emptyPlace.getCell(), player); //no game won and still room to move if(newBoard.getWinner() == Block.TYPE.NONE && newBoard.getEmptyPlaces().size() > 0) { //is an node (has children) Place tempPlace = getBestMove(newBoard, invertPlayer(player)); //ERROR is thrown here! tempPlace is null. emptyPlace.setScore(tempPlace.getScore()); } else { //is an leaf if(newBoard.getWinner() == Block.TYPE.NONE) { emptyPlace.setScore(0); } else if(newBoard.getWinner() == Block.TYPE.X) { emptyPlace.setScore(-1); } else if(newBoard.getWinner() == Block.TYPE.O) { emptyPlace.setScore(1); } //if this move is better then our prev move, take it! if((bestPlace == null) || (player == Block.TYPE.X && emptyPlace.getScore() < bestPlace.getScore()) || (player == Block.TYPE.O && emptyPlace.getScore() > bestPlace.getScore())) { bestPlace = emptyPlace; } } } //This should never be null, but it does.. return bestPlace; } private static Block.TYPE invertPlayer(Block.TYPE player) { if(player == Block.TYPE.X) { return Block.TYPE.O; } return Block.TYPE.X; } }

    Read the article

  • "sr0" I/O read boot error in Xubuntu 12.10

    - by Entropicurity
    Just recently upgraded Xubuntu 12.10 after having installed 12.04 originally. Ever since that happened, any time I inserted a disk into my DVD/CD reader/writer I would end up getting a number of error messages from my DVD player/Audio player softer, typically with any of them either crashing or returning a GStreamer backend error. So doing some research I tried to mount it manually, and it typically returned the error messages you'll see below: (using the dmesg | grep "sr0" command) [17545.435584] end_request: I/O error, dev sr0, sector 0 [17545.492968] sr 3:0:0:0: >[sr0] [17545.492981] sr 3:0:0:0: >[sr0] [17545.492992] sr 3:0:0:0: >[sr0] [17545.493003] sr 3:0:0:0: >[sr0] CDB: [17545.493020] end_request: I/O error, dev sr0, sector 0 [17545.493058] EXT3-fs (sr0): error: unable to read superblock [17545.553224] sr 3:0:0:0: >[sr0] [17545.553237] sr 3:0:0:0: >[sr0] [17545.553247] sr 3:0:0:0: >[sr0] [17545.553258] sr 3:0:0:0: >[sr0] CDB: [17545.553275] end_request: I/O error, dev sr0, sector 0 [17545.553312] EXT4-fs (sr0): unable to read superblock [17545.611482] sr 3:0:0:0: >[sr0] [17545.611494] sr 3:0:0:0: >[sr0] [17545.611504] sr 3:0:0:0: >[sr0] [17545.611514] sr 3:0:0:0: >[sr0] CDB: [17545.611531] end_request: I/O error, dev sr0, sector 0 [17545.611568] FAT-fs (sr0): unable to read boot sector When I grepped this, the number of error messages just seemed to spill all over the screen, and typically all revolve around the I/O error. I then went into VLC and tried to run the stuff through there, but for some reason it won't read with the default devices. Instead I have to manually input sr0 into each of the /dev/ references and it will play just fine, until I exit out of the program, at which point I have to re-input everything. I have already installed all the media dependencies, both open source and restricted, through the software center. I just found this strange, as out of the box 12.04 there wasn't any problem what so ever. At this point, it could be that all my audio CD's are not in a format that is familiar with the OS (I've read in some places that EXTF4 has issues with this) but I don't see how that could be a problem when the above error messages even tested to see if it is EXT3 as well? I've tried my best to troubleshoot this up till now using existing topics, but it seems that this is a regular problem with a multitude of varying factors that incorporate into it, including but not limited to read/write problems with the format of the CD and right protection. Is there something integral that I am missing?

    Read the article

  • How do I reconfigure my GLES frame buffer after a rotation?

    - by Panda Pajama
    I am implementing interface rotation for my GLES based game for iOS, written in Xamarin.iOS with OpenTK. I am detecting the rotation by overriding WillRotate, in my UIViewController, and I correctly re-setup all of my projection matrices. However, when drawing a sprite, the image looks a bit blurrier on the landscape version compared to the portrait version, as you can see in the following closeups magnified 10x. Portrait (before rotating) Landscape (after rotating) In both cases, I'm using the same texture with the same sampler, the same shader, and the same GL state. I just changed the order of the parameters in the projection matrix, so the resulting sizes should be exactly the same pixelwise. Since this could be thought of as a window resize, I suppose that the framebuffer has to be recreated to the new size. When working on desktop apps on Direct3D11 (SharpDX), I would have to call swapChain.ResizeBuffers() to do this. I have tried setting AutoResize = true in my iPhoneOSGameView, but then the framebuffer gets clipped as I rotate the interface, and then everything disappears when rotating the interface again. I'm not doing anything strange, my framebuffer initialization is pretty vanilla: int scaling = (int)UIScreen.MainScreen.Scale; DeviceWidth = (int)UIScreen.MainScreen.Bounds.Width * scaling; DeviceHeight = (int)UIScreen.MainScreen.Bounds.Height * scaling; Size = new System.Drawing.Size((int)(DeviceWidth), (int)(DeviceHeight)); Bounds = new System.Drawing.RectangleF(0, 0, DeviceWidth, DeviceHeight); Frame = new System.Drawing.RectangleF(0, 0, DeviceWidth, DeviceHeight); ContextRenderingApi = EAGLRenderingAPI.OpenGLES2; AutoResize = true; LayerRetainsBacking = true; LayerColorFormat = EAGLColorFormat.RGBA8; I get inconsistent results when changing Size, Bounds and Frame on my CreateFrameBuffer override, but since the documentation is so incomplete (it has nothing on Bounds and Frame), I have resorted to randomly changing stuff here and there without really knowing what is going on. There is a similar question which has no answers. However, I don't know if they're experiencing the same problem as I am. Is my supposition that recreating the framebuffer is necessary, correct? If so, does anybody know how to do it correctly in OpenTK for Xamarin.iOS?

    Read the article

  • How do I use setFilmSize in panda3d to achieve the correct view?

    - by lhk
    I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

    Read the article

  • Tales of a corrupt SQL log

    - by guybarrette
    Warning: I’m a simple dev, not an all powerful DBA with godly powers. This morning, one of my sites was down and DNN reported a problem with the database.  A quick series of tests revealed that the culprit was a corrupted log file. Easy fix I said, I have daily backups so it’s just a mater of restoring a good copy of the database and log files.  Well, I found out that’s not exactly true.  You see, for this database, I have daily file backups and these are not database backups created by SQL Server. So I restored a set of files from a couple of days ago, stopped the SQL service, copied the files over the bad ones, restarted the service only to find out that SQL doesn’t like when you do that.  It suspects something fishy and marks the database as suspect.  A database marked as suspect can’t be accessed at all.  So now what? I searched throughout the tubes of the InterWeb and found that you can restore from a corrupted log file by creating a new database with the same name as the defective one, then copy the restored database file (the one with data) over the newly created one.  Sweet!  But you still end up with SQL marking the database as suspect but at least, the newly created log is OK.  Well not true, it’s not corrupted but the lack of data makes it not OK for SQL so you need to rebuild the log.  How can you do that when SQL blocks any action the database?  First, you need to change the database status from suspect to emergency.  Then you need to set the database for single access only.  After that, you need to repair the log with DBCC and do the DBA dance.  If you dance long enough, SQL should repair the log file.  Now you need to set the access back to multi user.  Here’s the T-SQL script: use master GO EXEC sp_resetstatus 'MyDatabase' ALTER DATABASE MyDatabase SET EMERGENCY Alter database MyDatabase set Single_User DBCC checkdb('MyDatabase') ALTER DATABASE MyDatabase SET SINGLE_USER WITH ROLLBACK IMMEDIATE DBCC CheckDB ('MyDatabase', REPAIR_ALLOW_DATA_LOSS) ALTER DATABASE MyDatabase SET MULTI_USER So I guess that I would have been a lot easier to restore a SQL backup.  I can’t really say but the InterWeb seems to say so.  Anyway, lessons learned: Vive la différence: File backups are different then SQL backups. Don’t touch me: SQL doesn’t like when you restore a file over a corrupted one. The more the merrier: You should do both SQL and file backups. WTF?: The InterWeb provides you with dozens of way to deal with the problem but many are SQL 2000 or SQL 2005 only, many are confusing and many are written in strange dialects only DBAs understand. var addthis_pub="guybarrette";

    Read the article

  • More Maintenance Plan Weirdness

    - by AjarnMark
    I’m not a big fan of the built-in Maintenance Plan functionality in SQL Server.  I like the interface in SQL 2005 better than 2000 (it looks more like building an SSIS package) but it’s still a bit of a black box.  You don’t really know what commands are being run based on the selections you have made, and you can easily make some unwise choices without realizing it, such as shrinking your database on a regular basis.  I really prefer to know exactly what commands and with which options are being run on my servers. Recently I had another very strange thing happen with a Maintenance Plan, this time in SQL 2005, SP3.  I inherited this server and have done a bit of cleanup on it, but had not yet gotten around to replacing the Maintenance Plans with all my own scripts.  However, one of the maintenance plans which was just responsible for doing LOG backups was running more frequently than that system needed, and I thought I would just tweak the schedule a bit.  So I opened the Maintenance Plan and edited the properties of the Subplan, setting a new schedule, saved it and figured all was good to go.  But the next execution of the Scheduled Job that triggers the Maintenance Plan code failed with an error about the Owner of the job.  Specifically the error was, “Unable to determine if the owner (OldDomain\OldDBAUserID) of job MaintenancePlanName.Subplan has server access (reason: Could not obtain information about Windows NT group/user 'OldDomain\OldDBAUserID’..”  I was really confused because I had previously updated all of the jobs to have current accounts as the owners.  At first I thought it was just a fluke, but it happened on the next scheduled cycle so I investigated further and sure enough, that job had the old DBA’s account listed as the owner.  I fixed it and the job successfully ran to completion. Now, I don’t really like mysteries like that, so I did some more testing and verified that, sure enough, just editing the Subplan schedule and saving the Maintenance Job caused the Scheduled Job to be recreated with the old credentials.  I don’t know where it is getting those credentials, but I can only assume that it is the same as the original creator of the Maintenance Plan, and for some reason it insists on using that ID for the job owner.  I looked through the options in SSMA and could not find anything would let me easily set the value that I wanted it to use.  I suspect that if I did something like executing sp_changeobjectowner against the Maintenance Plan that it would use that new ID instead.  I’m sure that there is good reason that it works this way, but rather than mess around with it much more, I’m just going to spend my time rolling out my replacement scripts instead. Chalk this little hidden oddity up as yet one more reason I’m not a fan of Maintenance Plans.

    Read the article

  • Types of semantic bugs, logic errors [closed]

    - by C-Otto
    I am a PhD student and currently focus on automatically finding instances of new types of bugs in (Java) programs that cannot be found by existing tools like FindBugs. The existing tool currently is used to prove/disprove termination of (Java) programs. I have some ideas (see below), but I could need more input from you (experienced programmers, potential users of my tool). What kind of bugs do you wish to find? What types of bugs exist and might be suitable for my analysis? One strength of the approach I use is detailled information about the heap. So in contrast to FindBugs, I can work with knowledge of the form "variable x and variable y are disjoint on the heap" or "variable z is not cyclic". It is also possible to see if a method might have side effects (and if so, which variables may/may not be affected by it). Example 1: Vacuous call: Graph graphOne = createGraph(); Graph graphTwo = createGraph(); Node source = graphTwo.getRootNode(); for (Node n : graphOne.getNodes()) { if (areConnected(source, n)) { graphTwo.addNode(n); } } Imagine createGraph() creates a fresh graph, so that graphOne and graphTwo are disjoint on the heap. Then, because source is taken from graphTwo instead of graphOne, the call to areConnected always returns false. In this situation I could find out that the call areConnected is useless (because it does not have any side effect and the return value always is false) which helps finding the real bug (taking source from the wrong graph). For this the information that x and y are disjoint (because graphOne and graphTwo are disjoint) is crucial. This bug is related to calling x.equals(y) where x and y are objects of different classes. In this scenario, most implementations of equals() always return false, which most likely is not the intended result. FindBugs already finds this bug (hardcoded to equals(), semantics of implementation is not checked). Example 2: Useless code: someCode(); while (something()) { yetMoreSomething(); } moreCode(); In the case that the loop (so the code in something() and yetMoreSomething()) does not modify anything visible outside the loop, it does not make sense to run this code - the program has the same behaviour as someCode(); moreCode() (i.e., without the loop). To find this out, one needs detailled information about the side effects of the (possibly useless) code. If I can prove that the code does not have any side effect that can be observed afterwards (in the example: in moreCode() or later), then the code indeed is useless. Of course, here Input/Output of any form must be seen as a side effect, so that a System.out.println(...) is not considered useless. Example 3: Ignored return value: Instead of x = foo(); and making use of x, the method is called without storing the result: foo();. If the method does not have any side effect, its invocation is useless and can be dropped. Most likely, the bug here is that the returned value should have been used. Here, too, detailled information about side effects are needed. Can you think of similar types of bugs that might be detected (only) with detailled information about the heap, side effects, semantics of called methods, ...? Did you encounter bugs related to the ones shown below in "real life"? By the way, the tool is AProVE and Java related publications can be found on my homepage. Thanks a lot, Carsten

    Read the article

  • How to generate xorg.conf? (X -configure segfaults)

    - by Nicolas Raoul
    My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

    Read the article

  • URL protocol handlers in basic Ubuntu Desktop

    - by Hibou57
    There was a way to register URL protocol handlers with Gconf, which is now obsolete and there seems to be no way to do the same with DConf (or Gsettings, its recommended wrapper). How do one properly register an URL protocol handlers since DConf? Additionally, something looks strange to me (as I don't understand it), on my Ubuntu 12.04 The protocol apt:// should be handled by the apturl command. It is so with my Opera browser, but only because I added this specific association using the browser's configuration facility. Otherwise, in the rest of the environment: Running xdg-open apt://foo.bar opens elinks (my www-browser alternative). Running gnome-open apt://foo.bar opens the Software?Center. Opening gcong-editor, I see a key /desktop/gnome/url-handlers/apt whose value is apturl "%s" and its enable. This configuration seems to be ignored, which is reasonably expected, as GConf is considered obsolete. Opening dconf-editor, I can't see anything related to URL handlers or protocols in /desktop/gnome It looks a bit messy to my eyes (just teasing with this wording, nothing bad) What's underneath? Side note: I'm looking for something which preferably works even when the full desktop environment is not loaded, like when running an i3wm session with only gsettings-daemon (and other stuffs unrelated to this case) is loaded. Update Another way to “register” a protocol handler is with *.desktop files and their MIME-Type; ex. MimeType=application/<the-protocol>;. I found a /usr/share/applications/ubuntu-software-center.desktop with this content: [Desktop Entry] Name=Ubuntu Software Center GenericName=Software Center Comment=Lets you choose from thousands of applications available for Ubuntu Exec=/usr/bin/software-center %u Icon=softwarecenter Terminal=false Type=Application Categories=PackageManager;GTK;System;Settings; MimeType=application/x-deb;application/x-debian-package;x-scheme-handler/apt; StartupNotify=true X-Ubuntu-Gettext-Domain=software-center Keywords=Sources;PPA;Install;Uninstall;Remove;Purchase;Catalogue;Store; This one explains why gnome-open apt://foo.bar opens the Software?Center instead of apturl. So I installed this apturl.desktop in ~/.local/share/applications: [Desktop Entry] Encoding=UTF-8 Version=1.0 Type=Application Terminal=false Exec=/usr/bin/apturl %u Name=APT-URL Comment=APT-URL handler Icon= Categories=Application;Network; MimeType=x-scheme-handler/apt; After update-desktop-database and even after rebooting, both xdg-open and gnome-open still do the same and ignore this user desktop file, which is usual, should override the other in /usr/share/applications/. May be there is something special with desktop files specifying x-scheme-handler MIME type and they are not handled the usual way. The desktop-file way does not answer the question.

    Read the article

  • Updates about Multidimensional vs Tabular #ssas #msbi

    - by Marco Russo (SQLBI)
    I recently read the blog post from James Serra Tabular model: Not ready for prime time? (read also the comments because there are discussions about a few points raised by James) and the following post from Christian Wade Multidimensional or Tabular. In the last 2 years I worked with many companies adopting Tabular in different scenarios and I agree with some of the points expressed by James in his post (especially about missing features in Tabular if compared to Multidimensional), but I strongly disagree in others. In general, Tabular is a good choice for a new project when: the development team does not have a good knowledge of Multidimensional and MDX (DAX is faster to learn, not so easy as it is sold by MS, but definitely easier than MDX) you don’t need calculations based on hierarchies (common in certain financial applications, but not so common as it could seem) there are important calculations based on distinct count measures there are complex calculations based on many-to-many relationships Until now, I never suggested to migrate an existing Multidimensional model to a Tabular one. There should be very important reasons for that, such as performance issues in distinct count and many-to-many relationships that cannot be easily solved by optimizing the Multidimensional model, but I still never encountered this scenario. I would say that in 80% of the new projects, you might use either Multidimensional or Tabular and the real difference is the time-to-market depending on the skills of the development team. So it’s not strange that who is used to Multidimensional is not moving to Tabular, not getting a particular benefit from the new model unless specific requirements exist. The recent DAXMD feature that allows using SharePoint Power View on Multidimensional is a really important one, even if I’d like having also Excel Power View enabled for this scenario (this should be just a question of time). Another scenario in which I’m seeing a growing adoption of Tabular is in companies that creates models for their product/service and do that by using XMLA or Tabular AMO 2012. I am used to call them ISVs, even if those providing services cannot be really defined in this way. These companies are facing the multitenancy challenge with Tabular and even if this is a niche market, I see some potential here, because adopting Tabular seems a much more natural choice than Multidimensional in those scenario where an analytical engine has to be embedded to deliver one of the features of a larger product/service delivered to customers. I’d like to see other feedbacks in the comments: tell your story of choosing between Tabular and Multidimensional in a BI project you started with SQL Server 2012, thanks!

    Read the article

  • How do you manage extensibility in your multi-tenant systems?

    - by Brian MacKay
    I've got a few big web based multi-tenant products now, and very soon I can see that there will be a lot of customizations that are tenant specific. An extra field here or there, maybe an extra page or some extra logic in the middle of a workflow - that sort of thing. Some of these customizations can be rolled into the core product, and that's great. Some of them are highly specific and would get in everyone else's way. I have a few ideas in mind for managing this, but none of them seem to scale well. The obvious solution is to introduce a ton of client-level settings, allowing various 'features' to be enabled on per-client basis. The downside with that, of course, is massive complexity and clutter. You could introduce a truly huge number of settings, and over time various types of logic (presentation, business) could get way out of hand. Then there's the problem of client-specific fields, which begs for something cleaner than just adding a bunch of nullable fields to the existing tables. So what are people doing to manage this? Force.com seems to be the master of extensibility; obviously they've created a platform from the ground up that is super extensible. You can add on to almost anything with their web-based UI. FogBugz did something similiar where they created a robust plugin model that, come to think of it, might have actually been inspired by Force. I know they spent a lot of time and money on it and if I'm not mistaken the intention was to actually use it internally for future product development. Sounds like the kind of thing I could be tempted to build but probably shouldn't. :) Is a massive investment in pluggable architecture the only way to go? How are you managing these problems, and what kind of results are you seeing? EDIT: It does look as though FogBugz handled the problem by building a fairly robust platform and then using that to put together their screens. To extend it you create a DLL containing classes that implement interfaces like ISearchScreenGridColumn, and that becomes a module. I'm sure it was tremendously expensive to build considering that they have a large of devs and they worked on it for months, plus their surface area is perhaps 5% of the size of my application. Right now I am seriously wondering if Force.com is the right way to handle this. And I am a hard core ASP.Net guy, so this is a strange position to find myself in.

    Read the article

  • XNA Moddable Game - Architecture Design and Reflection

    - by David K
    I've decided to embark on an XNA moddable game project of a simple rogue style. For all purposes of this question, I'm going to not be using a scripting engine, but rather allow modders to directly compile assemblies that are loaded by the game at run time. I know about the security problems this may raise. So in order to expose the moddable content, I have gone about creating a generic project in XNA called MyModel. This contains a number of interfaces that all inherit from IPlugin, such as IGameSystem, IRenderingSystem, IHud, IInputSystem etc. Then I've created another project called MyRogueModel. This references MyModel project, and holds interfaces such as IMonster, IPlayer, IDungeonGenerator, IInventorySystem. More rogue specific interfaces, but again, all interfaces in this project inherit from IPlugin. Then finally, I've created another project called MyRogueGame, that references both MyModel and MyRogueModel projects. This project will be the game that you run and play. Here I have put the actual implementation of the Monster, DungeonGenerator, InputSystem and RenderingSystem classes. This project will also scan the mods directory during run time and load any IPlugins it finds using reflection and override anything it finds from the default. For example if it finds a new implementation of the DungeonGenerator it will use that one instead. Now my question is, in order to get this far, I have effectively 2 projects that contain nothing but interfaces... which seems a little... strange ? For people to create mods for the game, I would give them both the MyModel and MyRogueModel assemblies in which they would reference. I'm not sure whether this is the right way to do it, but my reasoning goes as follows : If I write 1 input system, I can use it in any game I write. If I create 3 rogue like games, and a modder writes 1 rendering system, that modder could use the rendering system for all 3 games, because it all comes from the MyModel project. I come from a more web based C# role, so having empty interface projects doesn't seem wrong, its just something I haven't done before. Before I embark on something that might be crazy, I'd just like to know whether this is a foolish idea and whether there's a better (or established) design principle I should be following ?

    Read the article

  • Atheros AR928X wireless connection makes neighbourhood machine drop off line

    - by funicorn
    I have an Acer laptop with Atheros AR928X wireless card installed, supported by ath9k driver in the linux kernel. There are other 5 computers sharing wireless connection via a TPLink 150Mbit/s wireless router. At first I found the network is a little bit slower than it's in Windows7, which I accepted as it should be. However a very strange thing is, each time I connected to the router and downloaded stuff for a while, one of the computers running Windows7 in my local network dropped off from the router. And if I run my laptop under Windows7, everything is fine. What's even stranger is although the network becomes slower, only the certain computer drops and totally freezes in connection with the router. I'm not willing to conclude it's due to the unhealthy connection from my laptop to the router, however we have confirmed this for more than one times and there is no problem with the network when I'm running WIndows7. I'm extremely confused about what's going on. As a Linux user running Ubuntu over 5 years, I am awared that wireless driver in Linux is badly notorious of lack of stability and slow speed. But is it so bad that the unhealthy wireless connection can do damage to another computer in the same local network? I do see a lot of "Tx excessive retries" in iwconfig output. But how exactly does this happen ? Thanks for your help. I guess I have to use this answer box to show the outputs $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=47/70 Signal level=-63 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:23 Missed beacon:0 To show what's wrong with the wireless connection, I ran iwconfig again within 3 minutes, during which time I hardly did anything and the network was not much busy than being nearly idle $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:9 Invalid misc:28 Missed beacon:0 You can see Tx excessive retires and Invalid misc increase very quickly. $ sudo iwlist wlan0 modu wlan0 unknown modulation information. $ sudo iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency:2.427 GHz (Channel 4)

    Read the article

  • SharePoint: Numeric/Integer Site Column (Field) Types

    - by CharlesLee
    What field type should you use when creating number based site columns as part of a SharePoint feature? Windows SharePoint Services 3.0 provides you with an extensible and flexible method of developing and deploying Site Columns and Content Types (both of which are required for most SharePoint projects requiring list or library based data storage) via the feature framework (more on this in my next full article.) However there is an interesting behaviour when working with a column or field which is required to hold a number, which I thought I would blog about today. When creating Site Columns in the browser you get a nice rich UI in order to choose the properties of this field: However when you are recreating this as a feature defined in CAML (Collaborative Application Mark-up Language), which is a type of XML (more on this in my article) then you do not get such a rich experience.  You would need to add something like this to the element manifest defined in your feature: <Field SourceID="http://schemas.microsoft.com/sharepoint/3.0"        ID="{C272E927-3748-48db-8FC0-6C7B72A6D220}"        Group="My Site Columns"        Name="MyNumber"        DisplayName="My Number"        Type="Numeric"        Commas="FALSE"        Decimals="0"        Required="FALSE"        ReadOnly="FALSE"        Sealed="FALSE"        Hidden="FALSE" /> OK, its not as nice as the browser UI but I can deal with this. Hang on. Commas="FALSE" and yet for my number 1234 I get 1,234.  That is not what I wanted or expected.  What gives? The answer lies in the difference between a type of "Numeric" which is an implementation of the SPFieldNumber class and "Integer" which does not correspond to a given SPField class but rather represents a positive or negative integer.  The numeric type does not respect the settings of Commas or NegativeFormat (which defines how to display negative numbers.)  So we can set the Type to Integer and we are good to go.  Yes? Sadly no! You will notice at this point that if you deploy your site column into SharePoint something has gone wrong.  Your site column is not listed in the Site Column Gallery.  The deployment must have failed then?  But no, a quick look at the site columns via the API reveals that the column is there.  What new evil is this?  Unfortunately the base type for integer fields has this lovely attribute set on it: UserCreatable = FALSE So WSS 3.0 accordingly hides your field in the gallery as you cannot create fields of this type. However! You can use them in content types just like any other field (except not in the browser UI), and if you add them to the content type as part of your feature then they will show up in the UI as a field on that content type.  Most of the time you are not going to be too concerned that your site columns are not listed in the gallery as you will know that they are there and that they are still useable. So not as bad as you thought after all.  Just a little quirky.  But that is SharePoint for you.

    Read the article

  • How would I handle input with a Game Component?

    - by Aufziehvogel
    I am currently having problems from finding my way into the component-oriented XNA design. I read an overview over the general design pattern and googled a lot of XNA examples. However, they seem to be right on the opposite site. In the general design pattern, an object (my current player) is passed to InputComponent::update(Player). This means the class will know what to do and how this will affect the game (e.g. move person vs. scroll text in a menu). Yet, in XNA GameComponent::update(GameTime) is called automatically without a reference to the current player. The only XNA examples I found built some sort of higher-level Keyboard engine into the game component like this: class InputComponent: GameComponent { public void keyReleased(Keys); public void keyPressed(Keys); public bool keyDown(Keys); public void override update(GameTime gameTime) { // compare previous state with current state and // determine if released, pressed, down or nothing } } Some others went a bit further making it possible to use a Service Locator by a design like this: interface IInputComponent { public void downwardsMovement(Keys); public void upwardsMovement(Keys); public bool pausedGame(Keys); // determine which keys pressed and what that means // can be done for different inputs in different implementations public void override update(GameTime); } Yet, then I am wondering if it is possible to design an input class to resolve all possible situations. Like in a menu a mouse click can mean "click that button", but in game play it can mean "shoot that weapon". So if I am using such a modular design with game components for input, how much logic is to be put into the InputComponent / KeyboardComponent / GamepadComponent and where is the rest handled? What I had in mind, when I heard about Game Components and Service Locator in XNA was something like this: use Game Components to run the InputHandler automatically in the loop use Service Locator to be able to switch input at runtime (i.e. let player choose if he wants to use a gamepad or a keyboard; or which shall be player 1 and which player 2). However, now I cannot see how this can be done. First code example does not seem flexible enough, as on a game pad you could require some combination of buttons for something that is possible on keyboard with only one button or with the mouse) The second code example seems really hard to implement, because the InputComponent has to know in which context we are currently. Moreover, you could imagine your application to be multi-layered and let the key-stroke go through all layers to the bottom-layer which requires a different behaviour than the InputComponent would have guessed from the top-layer. The general design pattern with passing the Player to update() does not have a representation in XNA and I also cannot see how and where to decide which class should be passed to update(). At most time of course the player, but sometimes there could be menu items you have to or can click I see that the question in general is already dealt with here, but probably from a more elobate point-of-view. At least, I am not smart enough in game development to understand it. I am searching for a rather code-based example directly for XNA. And the answer there leaves (a noob like) me still alone in how the object that should receive the detected event is chosen. Like if I have a key-up event, should it go to the text box or to the player?

    Read the article

  • Five Fake Sounds Engineered to Make Your Feel Better [Science]

    - by Jason Fitzpatrick
    As objects in our environment (like cars, ATMs, and phones) have grown lighter and quieter scientists have been carefully engineering their sounds so that they continue to sound like we expect them to. Read on to see how. At the design blog Humans Invent they share five interesting ways that the world around us is being engineered so it sounds the way we expect it to. They start with the example of the car door. Years ago cars were almost entirely steel, the doors were weighty, and when you slammed them it sounded like one big hunk of steel locking into another big hunk of steel (which, in fact, it was). Newer cars are lighter but people still crave that substantial clunk. Humans Invent highlights the effect of consumer desire: A car door is essentially a hollow shell with parts placed inside it. Without careful design the door frame amplifies the rattling of mechanisms inside. Car companies know that if buyers don’t get a satisfying thud when they close the door, it dents their confidence in the entire vehicle. To produce the ideal clunk, car doors are designed to minimise the amount of high frequencies produced (we associate them with fragility and weakness) and emphasise low, bass-heavy frequencies that suggest solidity. The effect is achieved in a range of different ways – car companies have piled up hundreds of patents on the subject – but usually involves some form of dampener fitted in the door cavity. Locking mechanisms are also tailored to produce the right sort of click and the way seals make contact is precisely controlled. On average it takes 1.8 seconds to close a car door but in that time you’re witnessing a strange kind of symphony composed by engineers and designers whose goal is to reassure you that its rock solid. They mention lock mechanisms, something you may never have thought about. A friend of mine had a Ford Focus some years ago and that particular model had electric locks that, instead of giving a satisfying thunk or solid click, made this horrible gates-of-the-prison-buzzing sound that was completely unnerving. Hit up the link below to see how sounds are engineered for car doors, electric motors, ATM machines, and more. 5 Fake Sounds Designed to Help Humans [Humans Invent via Boing Boing] How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

    Read the article

  • Function Folding in #PowerQuery

    - by Darren Gosbell
    Originally posted on: http://geekswithblogs.net/darrengosbell/archive/2014/05/16/function-folding-in-powerquery.aspxLooking at a typical Power Query query you will noticed that it's made up of a number of small steps. As an example take a look at the query I did in my previous post about joining a fact table to a slowly changing dimension. It was roughly built up of the following steps: Get all records from the fact table Get all records from the dimension table do an outer join between these two tables on the business key (resulting in an increase in the row count as there are multiple records in the dimension table for each business key) Filter out the excess rows introduced in step 3 remove extra columns that are not required in the final result set. If Power Query was to execute a query like this literally, following the same steps in the same order it would not be overly efficient. Particularly if your two source tables were quite large. However Power Query has a feature called function folding where it can take a number of these small steps and push them down to the data source. The degree of function folding that can be performed depends on the data source, As you might expect, relational data sources like SQL Server, Oracle and Teradata support folding, but so do some of the other sources like OData, Exchange and Active Directory. To explore how this works I took the data from my previous post and loaded it into a SQL database. Then I converted my Power Query expression to source it's data from that database. Below is the resulting Power Query which I edited by hand so that the whole thing can be shown in a single expression: let     SqlSource = Sql.Database("localhost", "PowerQueryTest"),     BU = SqlSource{[Schema="dbo",Item="BU"]}[Data],     Fact = SqlSource{[Schema="dbo",Item="fact"]}[Data],     Source = Table.NestedJoin(Fact,{"BU_Code"},BU,{"BU_Code"},"NewColumn"),     LeftJoin = Table.ExpandTableColumn(Source, "NewColumn"                                   , {"BU_Key", "StartDate", "EndDate"}                                   , {"BU_Key", "StartDate", "EndDate"}),     BetweenFilter = Table.SelectRows(LeftJoin, each (([Date] >= [StartDate]) and ([Date] <= [EndDate])) ),     RemovedColumns = Table.RemoveColumns(BetweenFilter,{"StartDate", "EndDate"}) in     RemovedColumns If the above query was run step by step in a literal fashion you would expect it to run two queries against the SQL database doing "SELECT * …" from both tables. However a profiler trace shows just the following single SQL query: select [_].[BU_Code],     [_].[Date],     [_].[Amount],     [_].[BU_Key] from (     select [$Outer].[BU_Code],         [$Outer].[Date],         [$Outer].[Amount],         [$Inner].[BU_Key],         [$Inner].[StartDate],         [$Inner].[EndDate]     from [dbo].[fact] as [$Outer]     left outer join     (         select [_].[BU_Key] as [BU_Key],             [_].[BU_Code] as [BU_Code2],             [_].[BU_Name] as [BU_Name],             [_].[StartDate] as [StartDate],             [_].[EndDate] as [EndDate]         from [dbo].[BU] as [_]     ) as [$Inner] on ([$Outer].[BU_Code] = [$Inner].[BU_Code2] or [$Outer].[BU_Code] is null and [$Inner].[BU_Code2] is null) ) as [_] where [_].[Date] >= [_].[StartDate] and [_].[Date] <= [_].[EndDate] The resulting query is a little strange, you can probably tell that it was generated programmatically. But if you look closely you'll notice that every single part of the Power Query formula has been pushed down to SQL Server. Power Query itself ends up just constructing the query and passing the results back to Excel, it does not do any of the data transformation steps itself. So now you can feel a bit more comfortable showing Power Query to your less technical Colleagues knowing that the tool will do it's best fold all the  small steps in Power Query down the most efficient query that it can against the source systems.

    Read the article

  • When a problem is resolved

    - by Rob Farley
    This month’s T-SQL Tuesday is hosted by Jen McCown, and she’s picked the topic of Resolutions. It’s a new year, and she’s thinking about what people have resolved to do this year. Unfortunately, I’ve never really done resolutions like that. I see too many people resolve to quit smoking, or lose weight, or whatever, and fail miserably. I’m not saying I don’t set goals, but it’s not a thing for New Year. The obvious joke is “1920x1080” as a resolution, but I’m not going there. I think Resolving is a strange word. It makes it sound like I’m having to solve a problem a second time, when actually, it’s more along the lines of solving a problem well enough for it to count as finished. If something has been resolved, a solution has been provided. There is a resolution, through the provision of a solution. It’s a strangeness of English. When I look up the word resolution at dictionary.com, it has 12 options, including “settling of a problem”. There’s a finality about resolution. If you resolve to do something, you’re saying “Yes. This is a done thing. I’m resolving to do it, which means that it may as well be complete already.” I like to think I resolve problems, rather than just solving them. I want my solving to be final and complete. If I tune a query, I don’t want to find that I’m back in there, re-tuning it at some point. Strangely, if I re-solve a problem, that implies that I didn’t resolve it in the first place. I only solved it. Temporarily. We “data-folk” live in a world where the most common answer is “It depends.” Frustratingly, the thing an answer depends on may still be changing in the system in question. That probably means that any solution that is put in place may need reinvestigating at some point later. So do I resolve things? Yes. Am I Chuck Norris, and solve things so well the world would break first? No. Do these two claims happily sit beside each other? No, unfortunately not. But I happily take responsibility for things, and let my clients depend on me to see it through. As far as they are concerned, it is resolved. And so I resolve to keep resolving, right through 2011.

    Read the article

  • Should I install ubuntu on USB instead of HDD dual-boot?

    - by user2147243
    I had Ubuntu 12.04 installed as dual-boot OS on top of Vista on my laptop. Hacked the grub settings to default to Vista (instead of the default Ubuntu -- pain) on startup, and all was OK for occasional Ubuntu use for past 6 months. Then last week I got a strange message about 'lack of disk space' (~50MB free) when installing pxyplot, even though there was still about 6GB free disk space when I checked later. Then today the Ubuntu wouldn't load at all, and checking the HDD partitions in Vista it looked like the 15GB Ubuntu partition was now three smaller partitions! So, I got rid of those partitions and expanded the Vista partition to use the reclaimed space. Now can't restart ('grub rescue' appears and doesn't 'rescue' anything), so I'll have to do a boot recovery using a Vista installation CD. (Not a particularly user-friendly failure mode of the dual-boot installation!) I now have to decide to either a) try installing ubuntu on the HDD again, but don't want to stuff up my Vista ever again, as that is my most used OS, or b) install Ubuntu on a 16GB USB 3.0 stick. Apparently performance from USB won't be as good as from HDD, and running OS from USB stick does lots of r/w so the stick may fail after a few years! Perhaps installing Ubuntu on live USB and setup to then run in RAM would alleviate the performance/USB lifespan problems? If I create a live-USB for Ubuntu OS, will it boot off that when I restart the laptop with it plugged in? Or will I have to change the laptop setting for boot-order whenever I want to boot Ubuntu instead of Vista (that would be even more painful than the grub default boot order putting Ubuntu ahead of the existing Vista OS!) -- update: I recovered my Vista setup using Iolo SystemMechanic Disaster Recovery Tool, and created a bootable USB of Ubuntu 13.10 on an 8GB USB3.0 pendrive, with 4GB of 'persistence' to allow saving of settings, install some packages etc. It worked OK for a couple of test boots, but once I changed the time and desktop wallpaper, the next Ubuntu reboot crashed and I then couldn't get it to boot successfully. So I decided to install Ubuntu 12.04 LTS as a dual-boot again, but this time instead of partitioning the HDD and installing from an ISO DVD I used the wubi.exe tool to install Ubuntu as a dual-boot. Worked very well, although one oddity was that, despite asking how big the make the partition (20GB), the installed Ubuntu appears to be happily installed somewhere within the Vista NTFS file system (no partition shows up in Windows disk manager, and in Ubuntu disk management tool the entire 133 GB of HDD is showing, with ~40GB free space). A nice feature of installing the dual-boot using wubi is that the laptop now uses Windows boot manager on startup, with Vista as the default OS and Ubuntu happily listed as second on the list. So far so good.

    Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >