Search Results

Search found 5509 results on 221 pages for 'wordpress feed'.

Page 203/221 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• Setting Android webview initialScale prevents proper zooming

  - by Ryan

  Need: I want a webview to automatically be sized to fit the width of that particular page. I have Googled this and found several different suggestions. Most of them work. But then each of them effects zooming in / zooming out. What I'm looking for is a solution that accomplishes both. The webview is initially set to fill the screen, but then it allows the user to zoom in (with pinching) and zoom out. What I've Tried: mainView.getSettings().setLoadWithOverviewMode(true); mainView.getSettings().setUseWideViewPort(false); mainView.setScrollBarStyle(WebView.SCROLLBARS_OUTSIDE_OVERLAY); mainView.getSettings().setBuiltInZoomControls(true); mainView.getSettings().setSupportZoom(true); I have also tried setting mainView.setInitialScale(various percentages) Again, I have tried these in different orders, including some, not including others. Currently, if I use the above code and setInitialScale(65), it loads initially fine but then once you zoom in, you cannot zoom all the way back out. Does anyone know of the best practice to set initial scale to fit screen but fully allow zooming out and in? Why I Need It: I'm using a ViewFlipper in my Android app to load several webviews simultaneously. I have a touch sensor that allows sliding from left to right to switch between different webviews. The practical purpose of this is to show a grocery store's ads and allow the user to slide from page to page. The problem is that the API feed I'm using basically only allows me to load a URL for each page. So I have to use webviews.

  Read the article

• I asked a question about arrays before, but this one won't compile

  - by unit

  I asked about this array a little while ago, and I can't see what the problem is. Too tired. What have I done wrong? Basically, I am taking a string array and trying to check to see if it contains numbers or an x (ISBN number validation). I want to take the number from a given input (bookNum), check the input, and feed any valid input into a new array (book). At the line 'bookNum.charAt[j]==book[i]' I get the 'not a statement error'. What gives? String[] book = new String [ISBN_NUM]; bookNum.replaceAll("-",""); if (bookNum.length()!=ISBN_NUM) throw new ISBNException ("ISBN "+ bookNum + " must be 10 characters"); for (int i=0;i<bookNum.length();i++) { if (Character.isDigit(bookNum.charAt(i))) bookNum.CharAt[j]==book[i]; j++; if (book[9].isNotDigit()|| book[9]!="x" || book[9]!="X") throw new ISBNException ("ISBN " + bookNum + " must contain all digits" + "or 'X' in the last position");

  Read the article

• how to slove error when using thread?

  - by ChandreshKanetiya

  I have following error msg in console when using NSThread "Tried to obtain the web lock from a thread other than the main thread or the web thread. This may be a result of calling to UIKit from a secondary thread. Crashing now..." I have submit my sample code here - (void)viewDidLoad { appDeleg = (NewAshley_MedisonAppDelegate *)[[UIApplication sharedApplication] delegate]; [[self tblView1] setRowHeight:80.0]; [super viewDidLoad]; self.title = @"Under Ground"; [UIApplication sharedApplication].networkActivityIndicatorVisible = YES; [NSThread detachNewThreadSelector:@selector(CallParser) toTarget:self withObject:nil]; } -(void)CallParser { Parsing *parsing = [[Parsing alloc] init]; [parsing DownloadAndParseUnderground]; [parsing release]; [self Update_View]; //[myIndicator stopAnimating]; [UIApplication sharedApplication].networkActivityIndicatorVisible = NO; } here "DownloadAndParseUnderground" is the method of downloding data from the rss feed and -(void) Update_View{ [self.tblView1 reloadData]; } when Update_View method is called the tableView reload Data and in the cellForRowAtIndexPath create error and not display custom cell - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; CustomTableviewCell *cell = (CustomTableviewCell *) [tblView1 dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { [[NSBundle mainBundle] loadNibNamed:@"customCell" owner:self options:nil]; cell = objCustCell; objCustCell = nil; }

  Read the article

• How can I use io.StringIO() with the csv module?

  - by Tim Pietzcker

  I tried to backport a Python 3 program to 2.7, and I'm stuck with a strange problem: >>> import io >>> import csv >>> output = io.StringIO() >>> output.write("Hello!") # Fail: io.StringIO expects Unicode Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: unicode argument expected, got 'str' >>> output.write(u"Hello!") # This works as expected. 6L >>> writer = csv.writer(output) # Now let's try this with the csv module: >>> csvdata = [u"Hello", u"Goodbye"] # Look ma, all Unicode! (?) >>> writer.writerow(csvdata) # Sadly, no. Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: unicode argument expected, got 'str' According to the docs, io.StringIO() returns an in-memory stream for Unicode text. It works correctly when I try and feed it a Unicode string manually. Why does it fail in conjunction with the csv module, even if all the strings being written are Unicode strings? Where does the str come from that causes the Exception? (I do know that I can use StringIO.StringIO() instead, but I'm wondering what's wrong with io.StringIO() in this scenario)

  Read the article

• Parse particular text from an XML string

  - by Dan Sewell

  Hi all, Im writing an app which reads an RSS feed and places items on a map. I need to read the lat and long numbers only from this string: http://www.xxxxxxxxxxxxxx.co.uk/map.aspx?isTrafficAlert=true&lat=53.647351&lon=-1.933506 .This is contained in link tags Im a bit of a programming noob but im writing this in C#/Silverlight using Linq to XML. Shold this text be extrated when parsing or after parsing and sent to a class to do this? Many thanks for your assistance. EDIT. Im going to try and do a regex on this this is where I need to integrate the regex somewhere in this code. I need to take the lat and long from the Link element and seperate it into two variables I can use (the results are part of a foreach loop that creates a list.) var events = from ev in document.Descendants("item") select new { Title = (ev.Element("title").Value), Description = (ev.Element("description").Value), Link = (ev.Element("link").Value), }; Question is im not quite ure where to put the regex (once I work out how to use the regex properly! :-) )

  Read the article

• Issue with post data not received in a php page

  - by jul

  hi, I created a page in Wordpress (http://www.exam-vision.com/testmail) that sends POST data to itself in order to send an email. The code is shown below. While it seems that data are sent properly, it seems that they are not received since isset($_REQUEST['email']) is always false. Anybody could help? Thanks Jul <?php if (isset($_REQUEST['email'])) //if "email" is filled out, send email { //send email echo "isset email is true"; $email = $_REQUEST['email'] ; $subject = $_REQUEST['subject'] ; $message = $_REQUEST['message'] ; mail( "[email protected]", "Subject: $subject", $message, "From: $email" ); echo "Thank you for using our mail form"; } else //if "email" is not filled out, display the form { echo "<form method='post' action=''> Email: <input name='email' type='text' /><br /> Subject: <input name='subject' type='text' /><br /> Message:<br /> <textarea name='message' rows='15' cols='40'> </textarea><br /> <input type='submit' /> </form>"; } ?>

  Read the article

• Mapping many-to-many association table with extra column(s)

  - by user635524

  My database contains 3 tables: User and Service entities have many-to-many relationship and are joined with the SERVICE_USER table as follows: USERS - SERVICE_USER - SERVICES SERVICE_USER table contains additional BLOCKED column. What is the best way to perform such a mapping? These are my Entity classes @Entity @Table(name = "USERS") public class User implements java.io.Serializable { private String userid; private String email; @Id @Column(name = "USERID", unique = true, nullable = false,) public String getUserid() { return this.userid; } .... some get/set methods } @Entity @Table(name = "SERVICES") public class CmsService implements java.io.Serializable { private String serviceCode; @Id @Column(name = "SERVICE_CODE", unique = true, nullable = false, length = 100) public String getServiceCode() { return this.serviceCode; } .... some additional fields and get/set methods } I followed this example http://giannigar.wordpress.com/2009/09/04/m ... using-jpa/ Here is some test code: User user = new User(); user.setEmail("e2"); user.setUserid("ui2"); user.setPassword("p2"); CmsService service= new CmsService("cd2","name2"); List<UserService> userServiceList = new ArrayList<UserService>(); UserService userService = new UserService(); userService.setService(service); userService.setUser(user); userService.setBlocked(true); service.getUserServices().add(userService); userDAO.save(user); The problem is that hibernate persists User object and UserService one. No success with the CmsService object I tried to use EAGER fetch - no progress Is it possible to achieve the behaviour I'm expecting with the mapping provided above? Maybe there is some more elegant way of mapping many to many join table with additional column?

  Read the article

• jQuery $.each()-problem

  - by Volmar

  Hi, im making a wordpress plugin and i have a function where i import images, this is done with a $.each()-loop that calls a .load()-function every iteration. The load-function page the load-function calls is downloading the image and returns a number. The number is imported into a span-element. The source and destination Arrays is being imported from LI-elemnts of a hidden ULs. this way the user sees a counter counting from zero up to the total number of images being imported. You can se my jQuery code below: jQuery(document).ready(function($) { $('#mrc_imp_img').click(function(){ var dstA = []; var srcA = []; $("#mrc_dst li").each(function() { dstA.push($(this).text()) }); $("#mrc_src li").each(function() { srcA.push($(this).text()) }); $.each(srcA, function (i,v) { $('#mrc_imgimport span.fc').load('/wp-content/plugins/myplugin/imp.php?num='+i+'&dst='+dstA[i]+'&src='+srcA[i]); }); }); }); This works pretty good but sometimes it looks like the load function isn't updating the DOM as fast as it should because sometimes the numbers that the span is updated with is lower than the previous and almost everytime a lower number is replacing the last number in the end. How can i prevent this from happening and how can i make it hide '#mrc_imp_img' when the $.each-loop is ready?

  Read the article

• Layering Images & Click to Choose Using Javascript

  - by rneal

  So I'm making a gallery of fabrics and backgrounds for letters for a fraternity/sorority store in my college's town. If you don't know what I'm talking about, this is a fabric letter. You can see how it has a white outline (background) and a red inside (foreground). WELL, I want to make it so you can change both the foreground and background, simply by clicking it's similar image. This is what I have so far <script type="text/javascript">// <![CDATA[ function changeImage(filename) { document.mainimage.src = filename; }// ]]></script> with these for each fabrics: <a href="javascript:changeImage('/wp-content/themes/collegiateconnectionbg/images/fabrics/foregrounds/37.jpg')"> <img src="/wp-content/themes/collegiateconnectionbg/images/fabrics/foregrounds/37.jpg" alt="" width="100px" height="50px" /></a> I really like how this works, but it's only good for one layer. Is there anyway I can add a layer below it, but still make it show at the top of the page? I know I'll have to use photoshop and transparency for both options, thats no problem, but I wanted to make sure I can do this before I start creating 600+ images. I know I can play with z-index and css, but since I'm using wordpress the one example I read about here wasn't working or I didn't completely understand it, and messed up my entire page. Also here's my tester webpage to see the current code in work. (if you click the navy&white stars image, you can see a very rough makeshift "A") Thanks in advance!

  Read the article

• How to increase my "advanced" knowledge of PHP further? (quickly)

  - by Kerry

  I have been working with PHP for years and gotten a very good grasp of the language, created many advanced and not-so-advanced systems that are working very well. The problem I'm running into is that I only learn when I find a need for something that I haven't learned before. This causes me to look up solutions and other code that handles the problem, and so I will learn about a new function or structure that I hadn't seen before. It is in this way that I have learned many of my better techniques (such as studying classes put out by Amazon, Google or other major companies). The main problem with this is the concept of not being able to learn something if you don't know it exists. For instance, it took me several months of programming to learn about the empty() function, and I simply would check the string length using strlen() to check for empty values. I'm now getting into building bigger and bigger systems, and I've started to read blogs like highscalability.com and been researching MySQL replication and server data for scaling. I know that structure of your code is very important to make full systems work. After reading a recent blog about reddit's structure, it made me question if there is some standard or "accepted systems" out there. I have looked into frameworks (I've used Kohana, which I regretted, but decided that PHP frameworks were not for me) and I prefer my own library of functions rather than having a framework. My current structure is a mix between WordPress, Kohana and my own knowledge. The ways I can see as being potentially beneficial are: Read blogs Read tutorials Work with someone else Read a book What would be the best way(s) to "get to the next level" the level of being a very good system developer?

  Read the article

• Where is a small, simple CMS that has no Front End done in PHP?

  - by user559469

  The keys are: small and simple PHP MySql no Front End By "no front end" I mean literally, I can control the look 100%. I just want a CMS on the "backend" to manage content (user login/security, upload images, udate articles, etc.) that will not dictate in anyway how the managed data is presented. Maybe it just keeps the info in a (MySql) database (which I can query and extract myself) or if it writes content, it is in super-clean xhtml fragments or even just xml I will parse myself? I have looked at Wordpress -- and don't like the code it generates, not to mention the sites look too "canned" (you can usually spot a WP site a mile a way.) Joomla and Drupal look more customizable, but they are bloated now in my opinion, and really I just want something lightweight and simple. For one-user mom-and-pop sites. (No tiered publishing/approval systems, and all that.) I envision plugging this CMS into existing websites/web apps where most of the site is made and managed by me, but a few choice areas are managed by the site owner.

  Read the article

• Syntax Problems of if Statement (php)

  - by MxmastaMills

  I need a little help with an if statement in php. I'm trying to set a variable called offset according to a page that I am loading in WordPress. Here's the variable: $offset = ($paged * 6); What it does is it loads the first page, which is: http://example.com/blog and $offset is thus set to 0 because $paged is referring to the appending number on the URL. The second page, for example is: http://example.com/blog/2/ which makes $offset set to 12. The problem is, I need the second page to define $offset as 6, the third page to define $offset as 12, etc. I tried using: $offset = ($paged * 6 - 6) which works except on the first page. On the first page it defines $offset as -6. SO, I wanted to create an if statement that says if $paged is equal to 0 then $offset is equal to 0, else $offset is equal to ($paged * 6 - 6). I struggle with syntax, even though I understand what needs to be done here. Any help would be greatly appreciated. Thanks!

  Read the article

• Framework or CMS for php web development?

  - by rocknroll

  Hi all, I am a C++,Unix developer who has never dabbled in web development apart from creating simple HTML pages. I am going to change that and develop a website at a personal level soon. I am going to use php,mysql on a linux machine. In this regard I am browsing through relevant literature. The language isn't a problem but reading about CMS's and frameworks is confusing. And since I am new to web development, the number of CMS's and Frameworks are overwhelming. ? My question is do I need to have knowledge of one or more CMS' and/or Frameworks like Drupal,Joomla,Zend,Wordpress etc. If yes which is the best open source CMS' and/or Framework suggested for a newbie. ?? If the answer to the above question is yes, does the choice changes if one delves into the realms of commercial web development? Note:- I will be developing on a Linux machine, using open source tools. Thanks in advance

  Read the article

• actionscript find and convert text to url

  - by gravesit

  I have this script that grabs a twitter feed and displays in a little widget. What I want to do is look at the text for a url and convert that url to a link. public class Main extends MovieClip { private var twitterXML:XML; // This holds the xml data public function Main() { // This is Untold Entertainment's Twitter id. Did you grab yours? var myTwitterID= "username"; // Fire the loadTwitterXML method, passing it the url to your Twitter info: loadTwitterXML("http://twitter.com/statuses/user_timeline/" + myTwitterID + ".xml"); } private function loadTwitterXML(URL:String):void { var urlLoader:URLLoader = new URLLoader(); // When all the junk has been pulled in from the url, we'll fire finishedLoadingXML: urlLoader.addEventListener(Event.COMPLETE, finishLoadingXML); urlLoader.load(new URLRequest(URL)); } private function finishLoadingXML(e:Event = null):void { // All the junk has been pulled in from the xml! Hooray! // Remove the eventListener as a bit of housecleaning: e.target.removeEventListener(Event.COMPLETE, finishLoadingXML); // Populate the xml object with the xml data: twitterXML = new XML(e.target.data); showTwitterStatus(); } private function addTextToField(text:String,field:TextField):void{ /*Regular expressions for replacement, g: replace all, i: no lower/upper case difference Finds all strings starting with "http://", followed by any number of characters niether space nor new line.*/ var reg:RegExp=/(\b(https?|ftp|file):\/\/[-A-Z0-9+&@#\/%?=~_|!:,.;]*[-A-Z0-9+&@#\/%=~_|])/ig; //Replaces Note: "$&" stands for the replaced string. text.replace(reg,"<a href=\"$&\">$&</a>"); field.htmlText=text; } private function showTwitterStatus():void { // Uncomment this line if you want to see all the fun stuff Twitter sends you: //trace(twitterXML); // Prep the text field to hold our latest Twitter update: twitter_txt.wordWrap = true; twitter_txt.autoSize = TextFieldAutoSize.LEFT; // Populate the text field with the first element in the status.text nodes: addTextToField(twitterXML.status.text[0], twitter_txt); }

  Read the article

• Is it an good idea to make a wrapper specifically for a DateTime that respresents Now?

  - by Dirk Boer

  I have been noticing lately that is really nice to use a DateTime representing 'now' as an input parameter for your methods, for mocking and testing purposes. Instead of every method calling DateTime.UtcNow themselves, I do it once in the upper methods and forward it on the lower ones. So a lot of methods that need a 'now', have an input parameter DateTime now. (I'm using MVC, and try to detect a parameter called now and modelbind DateTime.UtcNow to it) So instead of: public bool IsStarted { get { return StartTime >= DateTime.UtcNow; } } I usually have: public bool IsStarted(DateTime now) { return StartTime >= now; } So my convention is at the moment, if a method has a DateTime parameter called now, you have to feed it with the current time. Of course this comes down to convention, and someone else can easily just throw some other DateTime in there as a parameter. To make it more solid and static-typed I am thinking about wrapping DateTime in a new object, i.e. DateTimeNow. So in one of the most upper layers I will convert the DateTime to a DateTimeNow and we will get compile errors when, someone tries to fiddle in a normal DateTime. Of course you can still workaround this, but at least if feels more that you are doing something wrong at point. Did anyone else ever went into this path? Are there any good or bad results on the long term that I am not thinking about?

  Read the article

• What goes into the "Controller" in "MVC"?

  - by P72endragon

  I think I understand the basic concepts of MVC - the Model contains the data and behaviour of the application, the View is responsible for displaying it to the user and the Controller deals with user input. What I'm uncertain about is exactly what goes in the Controller. Lets say for example I have a fairly simple application (I'm specifically thinking Java, but I suppose the same principles apply elsewhere). I organise my code into 3 packages called app.model, app.view and app.controller. Within the app.model package, I have a few classes that reflect the actual behaviour of the application. These extends Observable and use setChanged() and notifyObservers() to trigger the views to update when appropriate. The app.view package has a class (or several classes for different types of display) that uses javax.swing components to handle the display. Some of these components need to feed back into the Model. If I understand correctly, the View shouldn't have anything to do with the feedback - that should be dealt with by the Controller. So what do I actually put in the Controller? Do I put the public void actionPerformed(ActionEvent e) in the View with just a call to a method in the Controller? If so, should any validation etc be done in the Controller? If so, how do I feedback error messages back to the View - should that go through the Model again, or should the Controller just send it straight back to View? If the validation is done in the View, what do I put in the Controller? Sorry for the long question, I just wanted to document my understanding of the process and hopefully someone can clarify this issue for me!

  Read the article

• xml parsing in php issue

  - by jan

  I have this code/function method as part of a class in php: function defaulthome(){ $fp = null; $err =''; $xml_parser = xml_parser_create(); $rss_parser = new Rssparser(); xml_set_object($xml_parser,&$rss_parser); xml_set_element_handler($xml_parser, "startElement", "endElement"); xml_set_character_data_handler($xml_parser, "characterData"); $fp = fopen("http://gulfnews.com/cmlink/business-rss-feed-1.446098?localLinksEnabled=false","r"); if(!$fp) $err = "Error reading RSS data."; else { $count = 0; while ($data = fread($fp, 4096) && $count<10) { xml_parse($xml_parser, $data, feof($fp)) or $err=xml_error_string(xml_get_error_code($xml_parser)); $count++; } } fclose($fp); xml_parser_free($xml_parser); $content_sect2 = $this->tnjn->render('forms/landlords_prompt.phtml'); $context = array('content1_title'=>'Welcome to my website','content1_article'=>"test article", 'feeds'=>$err); $output = $this->tnjn->render("default.phtml", $context); return $output; } I don't get results and the error i have is empty document! Does anyone know which part of the code is the problem? Thanks very much !!

  Read the article

• Jquery Ajax refresh not working in IE.

  - by Probocop

  Hi, I have a <ul> which refreshes every ten seconds to check if there have been any new tweets (its pulling from a twitter feed). This works fine in Firefox and Chrome etc, but it does not work in any version if Internet Explorer. My code is as follows: setInterval(function() { $("#banter .scroll-pane").load(location.href+" #banter .scroll-pane>*",""); }, 10000); My PHP function creating the list is as follows: function showTweets($section, $limit, $class) { $result = mysql_query("SELECT * FROM hash WHERE section = '".$section."' ORDER BY date DESC LIMIT ".$limit); echo '<ul class="scroll-pane '.$class.'">'; while($row = mysql_fetch_array($result)) { echo '<li>'; echo '<p>'.html_entity_decode($row['tweet']).'</p>'; echo '<a href="'.$row['user_url'].'">'.$row['user'].'</a>'; echo '</li>'; } echo '</ul>'; } Any idea what's going wrong? Thanks

  Read the article

• Show image on hover with PHP

  - by Sorosh

  I have a small problem with my PHP code and It would be very nice if someone could help me. I want to display an image when hovering over a link. This is the link with the PHP code that I have now: <a href="<?php the_permalink(); ?>"><?php if ( has_post_thumbnail() ) {the_post_thumbnail();} else if ( has_post_video() ) {the_post_video_image();}?></a> This code shows a image, but I want to execute this code when hovering over the link with the image: <?php echo print_image_function(); ?> The code also shows a image that belongs to a category. I don't want the initial image to disappear I simply want to show the second image on top off the first image when hovering over the first image. I don't know if it is helpful but I use Wordpress and I am not a PHP expert. I even don't know if this is going to work. Thats why I am asking if somebody can help me with this. Thanks in advance

  Read the article

• Real time content editing html5

  - by Mark Lauzon

  So I've seen things like WordPress and FCKEditor, and basically a bunch of stuff that uses external code that I can't see or edit. Whenever I ask about editing and saving the content of a page in real time I just get referenced to an API or I get handed code that only changes the page until it's reloaded. What I want to know is how do I code it myself? I want to add real time content editing to a page without the use of someone else's code. I've checked out code for various forums and wikipedia and whatnot, and all of it references code I don't have access to. Is this a thing? Can I edit a page in real time? I thought of writing the edited text to a file on the server, and then when they click save, reading it back into the code to the section they were editing, but I don't know how to do that or if it's even possible. As a side note, I'm very new to html, but not new to coding. EDIT: The structure can be very much like Wikipedia, it doesn't have to be real time, it just has to work

  Read the article

• PHP-FPM High Memory Usage

  - by Ruel

  I have a wordpress blog, that uses WP-SuperCache, and normally I get 100 visitors per day. With nginx + php-fpm it's blazing fast, and I have no regrets. One thing i noticed, php-fpm takes a lot of memory: top - 09:20:43 up 5 days, 15:53, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 26 total, 1 running, 25 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 329956k used, 718620k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10226 www-data 15 0 145m 52m 4584 S 0.0 5.1 0:07.55 php-fpm 10223 www-data 16 0 141m 48m 4692 S 0.0 4.8 0:08.70 php-fpm 20277 www-data 15 0 138m 46m 4368 S 0.0 4.5 0:07.55 php-fpm 20259 www-data 15 0 133m 41m 4600 S 0.0 4.0 0:06.68 php-fpm 12201 www-data 15 0 133m 41m 4632 S 0.0 4.0 0:08.31 php-fpm 11586 www-data 15 0 132m 40m 4292 S 0.0 3.9 0:03.27 php-fpm 29822 www-data 15 0 128m 36m 4356 S 0.0 3.6 0:05.26 php-fpm 28427 mysql 15 0 200m 7300 4764 S 0.0 0.7 0:47.89 mysqld 10202 root 18 0 98.3m 4320 1204 S 0.0 0.4 0:03.80 php-fpm 22524 root 18 0 86064 3396 2652 S 0.0 0.3 0:16.74 sshd 9882 www-data 18 0 42052 2572 804 S 0.0 0.2 0:27.52 nginx 9884 www-data 18 0 42052 2560 804 S 0.0 0.2 0:26.26 nginx 9881 www-data 18 0 42064 2524 804 S 0.0 0.2 0:29.24 nginx 9879 www-data 18 0 42032 2480 804 S 0.0 0.2 0:29.58 nginx 23771 root 15 0 12176 1820 1316 S 0.0 0.2 0:00.08 bash 28344 root 22 0 11932 1416 1184 S 0.0 0.1 0:00.00 mysqld_safe 18167 root 16 0 62628 1208 648 S 0.0 0.1 0:00.55 sshd 25941 root 15 0 12612 1192 928 R 0.0 0.1 0:02.21 top 11573 root 15 0 20876 1168 592 S 0.0 0.1 0:00.67 crond 9878 root 18 0 41000 1112 284 S 0.0 0.1 0:00.00 nginx 21736 root 23 0 21648 936 716 S 0.0 0.1 0:00.00 xinetd 11585 root 18 0 46748 816 428 S 0.0 0.1 0:00.00 saslauthd 14125 root 12 -4 12768 768 452 S 0.0 0.1 0:00.00 udevd 1 root 18 0 10352 728 616 S 0.0 0.1 0:17.93 init 24564 root 15 0 5912 680 544 S 0.0 0.1 0:01.90 syslogd 11618 root 18 0 46748 548 160 S 0.0 0.1 0:00.00 saslauthd Here's my php-fpm config: [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice [www] listen = 127.0.0.1:9000 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.start_servers = 3 pm.min_spare_servers = 3 pm.max_spare_servers = 10 pm.max_requests = 500 Sometimes it goes up to 400MB. And I'm planning to add a new website on my VPS. Is this normal?

  Read the article

• ISAPI filter with LDAP over SSL only works as administrator

  - by Zac

  I have created an ISAPI filter for IIS 6.0 that tries to authenticate against Active directory using LDAP. The filter works fine when authenticating regularly over port 389, but when I try to use SSL, I always get the 0x51 Server Down error at the ldap_connect() call. Even skipping the connect call and using ldap_simple_bind_s() results in the same error. The weird thing is that if I change the app pool identity to the local admin account, then the filter works fine and LDAP over SSL is successful. I created an exe with the same code below and ran it on the server as admin and it works. Using the default NETWORK SERVICE identity for the site's app pool is what seems to be the problem. Any thoughts as to what is happening? I want to use the default identity since I don't want the website to have elevated admin privileges. The server is in a DMZ outside the network and domain where our DCs are that run AD. We have a valid certificate on our DCs for AD as well. Code: // Initialize LDAP connection LDAP * ldap = ldap_sslinit(servers, LDAP_SSL_PORT, 1); ULONG version = LDAP_VERSION3; if (ldap == NULL) { strcpy(error_msg, ldap_err2string(LdapGetLastError())); valid_user = false; } else { // Set LDAP options ldap_set_option(ldap, LDAP_OPT_PROTOCOL_VERSION, (void *) &version); ldap_set_option(ldap, LDAP_OPT_SSL, LDAP_OPT_ON); // Make the connection ldap_response = ldap_connect(ldap, NULL); // <-- Error occurs here! // Bind and continue... } UPDATE: I created a new user without admin privileges and ran the test exe as the new user and I got the same Server Down error. I added the user to the Administrators group and got the same error as well. The only user that seems to work with LDAP over SSL authentication on this particular server is administrator. The web server with the ISAPI filter (and where I've been running the test exe) is running Windows Server 2003. The DCs with AD on them are running 2008 R2. Also worth mentioning, we have a WordPress site on the same server that authenticates against LDAP over SSL using PHP (OpenLDAP) and there's no problem there. I have an ldap.conf file that specifies TLS_REQCERT never and the user running the PHP code is IUSR.

  Read the article

• Forward all traffic through an ssh tunnel

  - by Eamorr

  I hope someone can follow this and I'll explain as best I can. I'm trying to forward all traffic from port 6999 on x.x.x.224, through an ssh tunnel, and onto port 7000 on x.x.x.218. Here is some ASCII art: |browser|-----|Squid on x.x.x.224|------|ssh tunnel|------<satellite link>-----|Squid on x.x.x.218|-----|www| 3128 6999 7000 80 When I remove the ssh tunnel, everything works fine. The idea is to turn off encryption on the ssh tunnel (to save bandwidth) and turn on maximum compression (to save more bandwidth). This is because it's a satellite link. Here's the ssh tunnel I've been using: ssh -C -f -C -o CompressionLevel=9 -o Cipher=none [email protected] -L 7000:172.16.1.224:6999 -N The trouble is, I don't know how to get data from Squid on x.x.x.224 into the ssh tunnel? Am I going about this the wrong way? Should I create an ssh tunnel on x.x.x.218? I use iptables to stop squid on x.x.x.224 from reading port 80, but to feed from port 6999 instead (i.e. via the ssh tunnel). Do I need another iptables rule? Any comments greatly appreciated. Many thanks in advance, Regarding Eduardo Ivanec's question, here is a netstat -i any port 7000 -nn dump from x.x.x.218: 14:42:15.386462 IP 172.16.1.224.40006 > 172.16.1.218.7000: Flags [S], seq 2804513708, win 14600, options [mss 1460,sackOK,TS val 86702647 ecr 0,nop,wscale 4], length 0 14:42:15.386690 IP 172.16.1.218.7000 > 172.16.1.224.40006: Flags [R.], seq 0, ack 2804513709, win 0, length 0 Update 2: When I run the second command, I get the following error in my browser: ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://109.123.109.205/index.php Zero Sized Reply Squid did not receive any data for this request. Your cache administrator is webmaster. Generated Fri, 01 Jul 2011 16:06:06 GMT by remote-site (squid/2.7.STABLE9) remote-site is 172.16.1.224 When I do a tcpdump -i any port 7000 -nn I get the following: root@remote-site:~# tcpdump -i any port 7000 -nn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused

  Read the article

• Compress with Gzip or Deflate my CSS & JS files

  - by muhammad usman

  i ve a fashion website & using wordpress. I want to Compress or Gzip or Deflate my CSS & JS files. i have tried many codes with .htaccess to compress but not working. Would any body help me please? My phpinfo is http://deemasfashion.co.uk/1.php below are the codes i have tried not not working. Few of them might be same but there is a difference in the syntax. <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file .(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> other code I have tried but not working... <files *.css> SetOutputFilter DEFLATE </files> <files *.js> SetOutputFilter DEFLATE </files> I have also tried this code as well but no success. <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> This code is also not working <FilesMatch "\.(html?|txt|css|js|php|pl)$"> SetOutputFilter DEFLATE </FilesMatch> Here is another code not working. <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/text text/html text/plain text/xml text/css application/x- javascript application/javascript </ifmodule> Here is another code not working. <IFModule mod_deflate.c> <filesmatch "\.(js|css|html|jpg|png|php)$"> SetOutputFilter DEFLATE </filesmatch> </IFModule> Here is another code not working. <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css application/x-javascript text/javascript application/javascript application/json <FilesMatch "\.(css|js)$" > SetOutputFilter DEFLATE </FilesMatch> </IfModule> Here is another code not working. #Gzip - compress text, html, javascript, css, xml <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript </ifmodule> #End Gzip Here is another code not working. <Location /> SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary SetEnvIfNoCase Request_URI \.(?:exe|t?gz|zip|gz2|sit|rar)$ no-gzip dont-vary </Location>

  Read the article

• How to redirect http requests to http (nginx)

  - by spuder

  There appear to be many questions and guides out there that instruct how to setup nginx to redirect http requests to https. Many are outdated, or just flat out wrong. server { listen *:80; server_name <%= @fqdn %>; #root /nowhere; #rewrite ^ https://$server_name$request_uri? permanent; #rewrite ^ https://$server_name$request_uri permanent; #return 301 https://$server_name$request_uri; #return 301 http://$server_name$request_uri; #return 301 http://192.168.33.10$request_uri; return 301 http://$host$request_uri; } server { listen *:443 ssl default_server; server_name <%= @fqdn %>; server_tokens off; root <%= @git_home %>/gitlab/public; ssl on; ssl_certificate <%= @gitlab_ssl_cert %>; ssl_certificate_key <%= @gitlab_ssl_key %>; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers AES:HIGH:!ADH:!MDF; ssl_prefer_server_ciphers on; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is requested, # then the proxy pass the request to the upsteam (gitlab puma) location @gitlab { proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_redirect off; ect.... I've restarted after every configuration change, and yet I still only get the 'Welcome to nginx' page when visiting http://192.168.33.10. whereas https://192.168.33.10 works perfectly. Why will nginx still not redirect http requests to https? tailf /var/log/nginx/access.log 192.168.33.1 - - [22/Oct/2013:03:41:39 +0000] "GET / HTTP/1.1" 304 0 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0" 192.168.33.1 - - [22/Oct/2013:03:44:43 +0000] "GET / HTTP/1.1" 200 133 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0" tailf /var/log/nginx/gitlab_error.lob 2013/10/22 02:29:14 [crit] 27226#0: *1 connect() to unix:/home/git/gitlab/tmp/sockets/gitlab.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.33.1, server: gitlab.localdomain, request: "GET / HTTP/1.1", upstream: "http://unix:/home/git/gitlab/tmp/sockets/gitlab.socket:/", host: "192.168.33.10" Resources http://wiki.nginx.org/Pitfalls How to make nginx redirect How to force or redirect to SSL in nginx? nginx ssl redirect Nginx & Https Redirection https://www.tinywp.in/301-redirect-wordpress/ How to force or redirect to SSL in nginx?

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >