Search Results

Search found 5228 results on 210 pages for 'bash alias'.

Page 204/210 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

  • Very slow compile times on Visual Studio

    - by johnc
    We are getting very slow compile times, which can take upwards of 20+ minutes on dual core 2GHz, 2G Ram machines. A lot of this is due to the size of our solution which has grown to 70+ projects, as well as VSS which is a bottle neck in itself when you have a lot of files. (swapping out VSS is not an option unfortunately, so I don't want this to descend into a VSS bash) We are looking at combing projects (not nice, as we like the separation of concerns, but is a good opportunity to refactor away some dead wood). We are also looking at having multiple solutions to achieve greater separation of concerns and quicker compile times for each element of the application. This I can see will become a dll hell as we try to keep things in synch. I am interested to know how other teams have dealt with this scaling issue, what do you do when your code base reaches a critical mass that you are wasting half the day watching the status bar deliver compile messages UPDATE Apologies, I neglected to mention this is a C# solution. Thanks for all the cpp suggestions, but it's been a few years since I've had to worry about headers. At a distance I say I miss C++, but I'm not sure I want to go back EDIT: Nice suggestions that have helped so far (not saying there aren't other nice suggestions below, just what has helped) New 3GHz laptop - the power of lost utilization works wonders when whinging to management Disable Anti Virus during compile 'Disconnecting' from VSS (actually the network) during compile - I may get us to remove VS-VSS integration altogether and stick to using the VSS UI Still not rip-snorting through a compile, but every bit helps. Orion did mention in a comment that generics may have a play also. From my tests there does appear to be a minimal performance hit, but not high enough to sure - compile times can be inconsistent due to disc activity. Due to time limitations, my tests didn't include as many Generics, or as much code, as would appear in live system, so that may accumulate. I wouldn't avoid using generics where they are supposed to be used, just for compile time performance WORKAROUND We are testing the practice of building new areas of the application in new solutions, importing in the latest dlls as required, them integrating them into the larger solution when we are happy with them. We may also do them same to existing code by creating temporary solutions that just encapsulate the areas we need to work on, and throwing them away after reintegrating the code. We need to weigh up the time it will take to reintegrate this code against the time we gain by not having Rip Van Winkle like experiences with rapid recompiling during development.

    Read the article

  • Detect user logout / shutdown in Python / GTK under Linux - SIGTERM/HUP not received

    - by Ivo Wetzel
    OK this is presumably a hard one, I've got an pyGTK application that has random crashes due to X Window errors that I can't catch/control. So I created a wrapper that restarts the app as soon as it detects a crash, now comes the problem, when the user logs out or shuts down the system, the app exits with status 1. But on some X errors it does so too. So I tried literally anything to catch the shutdown/logout, with no success, here's what I've tried: import pygtk import gtk import sys class Test(gtk.Window): def delete_event(self, widget, event, data=None): open("delete_event", "wb") def destroy_event(self, widget, data=None): open("destroy_event", "wb") def destroy_event2(self, widget, event, data=None): open("destroy_event2", "wb") def __init__(self): gtk.Window.__init__(self, gtk.WINDOW_TOPLEVEL) self.show() self.connect("delete_event", self.delete_event) self.connect("destroy", self.destroy_event) self.connect("destroy-event", self.destroy_event2) def foo(): open("add_event", "wb") def ex(): open("sys_event", "wb") from signal import * def clean(sig): f = open("sig_event", "wb") f.write(str(sig)) f.close() exit(0) for sig in (SIGABRT, SIGILL, SIGINT, SIGSEGV, SIGTERM): signal(sig, lambda *args: clean(sig)) def at(): open("at_event", "wb") import atexit atexit.register(at) f = Test() sys.exitfunc = ex gtk.quit_add(gtk.main_level(), foo) gtk.main() open("exit_event", "wb") Not one of these succeeds, is there any low level way to detect the system shutdown? Google didn't find anything related to that. I guess there must be a way, am I right? :/ EDIT: OK, more stuff. I've created this shell script: #!/bin/bash trap test_term TERM trap test_hup HUP test_term(){ echo "teeeeeeeeeerm" >~/Desktop/term.info exit 0 } test_hup(){ echo "huuuuuuuuuuup" >~/Desktop/hup.info exit 1 } while [ true ] do echo "idle..." sleep 2 done And also created a .desktop file to run it: [Desktop Entry] Name=Kittens GenericName=Kittens Comment=Kitten Script Exec=kittens StartupNotify=true Terminal=false Encoding=UTF-8 Type=Application Categories=Network;GTK; Name[de_DE]=Kittens Normally this should create the term file on logout and the hup file when it has been started with &. But not on my System. GDM doesn't care about the script at all, when I relog, it's still running. I've also tried using shopt -s huponexit, with no success. EDIT2: Also here's some more information aboute the real code, the whole thing looks like this: Wrapper Script, that catches errors and restarts the programm -> Main Programm with GTK Mainloop -> Background Updater Thread The flow is like this: Start Wrapper -> enter restart loop while restarts < max: -> start program -> check return code -> write error to file or exit the wrapper on 0 Now on shutdown, start program return 1. That means either it did hanup or the parent process terminated, the main problem is to figure out which of these two did just happen. X Errors result in a 1 too. Trapping in the shellscript doesn't work. If you want to take a look at the actual code check it out over at GitHub: http://github.com/BonsaiDen/Atarashii

    Read the article

  • Installing Monodevelop from the SVN on Ubuntu 10.04

    - by celil
    I wrote the following script to install the svn version of MonoDevelop #!/usr/bin/env bash PREFIX=/opt/local check_errs() { if [[ $? -ne 0 ]]; then echo "${1}" exit 1 fi } download() { if [ ! -d ${1} ] then svn co http://anonsvn.mono-project.com/source/trunk/${1} else (cd ${1}; svn update) fi } download mono download mcs download libgdiplus ( cd mono ./autogen.sh --prefix=$PREFIX make make install check_errs ) ( cd libgdiplus ./autogen.sh --prefix=$PREFIX make make install check_errs ) download monodevelop export PKG_CONFIG_PATH=${PREFIX}/lib/pkgconfig ( cd monodevelop ./configure --prefix=$PREFIX --select check_errs make check_errs ) Everything works fine until the last make step for the monodevelop pacakge, where the script exits with the error: ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(320,82): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(325,49): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(345,115): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(365,82): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `BeginMethod' and no extension method `BeginMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) Compilation failed: 4 error(s), 1 warnings make[4]: *** [../../../build/AddIns/MonoDevelop.WebReferences/MonoDevelop.WebReferences.dll] Error 1 make[4]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src/addins/MonoDevelop.WebReferences' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src/addins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main' make: *** [all-recursive] Error 1 Any ideas on how to fix this? I suppose the build gets mixed up with the default installation of mono in Ubuntu, and is looking for a symbol that is not present there. My build configuration looks as follows: 1. [X] main 2. [ ] extras/JavaBinding 3. [ ] extras/BooBinding 4. [X] extras/ValaBinding 5. [ ] extras/AspNetEdit 6. [ ] extras/GeckoWebBrowser 7. [ ] extras/WebKitWebBrowser 8. [ ] extras/MonoDevelop.Database 9. [ ] extras/MonoDevelop.Profiling 10. [ ] extras/MonoDevelop.AddinAuthoring 11. [ ] extras/MonoDevelop.CodeAnalysis 12. [ ] extras/MonoDevelop.Debugger.Mdb 13. [ ] extras/MonoDevelop.Debugger.Gdb 14. [ ] extras/PyBinding 15. [ ] extras/MonoDevelop.IPhone 16. [ ] extras/MonoDevelop.MeeGo

    Read the article

  • PHP SASL(PECL) sasl_server_init(app) works with CLI but not with ApacheModule

    - by ZokRadonh
    I have written a simple auth script so that Webusers can type in their username and password and my PHP script verifies them by SASL. The SASL Library is initialized by php function sasl_server_init("phpfoo"). So phpfoo.conf in /etc/sasl2/ is used. phpfoo.conf: pwcheck_method: saslauthd mech_list: PLAIN LOGIN log_level: 9 So the SASL library now tries to connect to saslauthd process by socket. saslauthd command line looks like this: /usr/sbin/saslauthd -r -V -a pam -n 5 So saslauthd uses PAM to authenticate. In the php script I have created sasl connection by sasl_server_new("php", null, "myRealm"); The first argument is the servicename. So PAM uses the file /etc/pam.d/php to see for further authentication information. /etc/pam.d/php: auth required pam_mysql.so try_first_pass=0 config_file=/etc/pam.d/mysqlconf.nss account required pam_permit.so session required pam_permit.so mysqlconf.nss has all information that is needed for a useful MySQL Query to user table. All of this works perfectly when I run the script by command line. php ssasl.php But when I call the same script via webbrowser(php apache module) I get an -20 return code (SASL_NOUSER). In /var/log/messages there is May 18 15:27:12 hostname httpd2-prefork: unable to open Berkeley db /etc/sasldb2: No such file or directory I do not have anything with a Berkeley db for authentication with SASL. I think authentication using /etc/sasldb2 is the default setting. In my opinion it does not read my phpfoo.conf file. For some reason the php-apache-module ignores the parameter in sasl_server_init("phpfoo"). My first thought was that there is a permission issue. So back in shell: su -s /bin/bash wwwrun php ssasl.php "Authentication successful". - No file-permission issue. In the source of the sasl-php-extension we can find: PHP_FUNCTION(sasl_server_init) { char *name; int name_len; if (zend_parse_parameters(1 TSRMLS_CC, "s", &name, &name_len) == FAILURE) { return; } if (sasl_server_init(NULL, name) != SASL_OK) { RETURN_FALSE; } RETURN_TRUE; } This is a simple pass through of the string. Are there any differences between the PHP CLI and PHP ApacheModule version that I am not aware of? Anyway, there are some interesting log entries when I run PHP in CLI mode: May 18 15:44:48 hostname php: SQL engine 'mysql' not supported May 18 15:44:48 hostname php: auxpropfunc error no mechanism available May 18 15:44:48 hostname php: _sasl_plugin_load failed on sasl_auxprop_plug_init for plugin: sqlite May 18 15:44:48 hostname php: sql_select option missing May 18 15:44:48 hostname php: auxpropfunc error no mechanism available May 18 15:44:48 hostname php: _sasl_plugin_load failed on sasl_auxprop_plug_init for plugin: sql Those lines are followed by lines of saslauthd and PAM which results in authentication success.(I do not get any of them in ApacheModule mode) Looks like that he is trying auxprop pwcheck before saslauthd. I have no other .conf file in /etc/sasl2. When I change the parameter of sasl_server_init to something other then I get the same error in CLI mode as in ApacheModule mode.

    Read the article

  • Segmentation fault when creating a Phonon MediaObject

    - by Luke Hansford
    I have music playing program made using PySide which uses Phonon to playback audio. I updated to MacOS X Mavericks a few days ago, which meant I needed to reinstall PySide. I'm not sure which of these actions has caused this, but now whenever I try to create a Phonon MediaObject I get a Segmentation Fault: 11 from Python. It's not just in my program, it happens when trying to create a MediaObject in Python without any other actions. I'm getting the following error message from my Mac whenever it crashes: Process: Python [13711] Path: /usr/local/Cellar/python/2.7.5/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python Identifier: org.python.python Version: 2.7.5 (2.7.5) Code Type: X86-64 (Native) Parent Process: bash [13707] Responsible: Terminal [13704] User ID: 501 Date/Time: 2013-11-01 19:47:53.164 +1000 OS Version: Mac OS X 10.9 (13A603) Report Version: 11 Anonymous UUID: C2686854-18CA-9D37-26E9-60050E3C4DA6 Sleep/Wake UUID: BB983BF6-CCE2-44D1-82A0-1C73382DFFE4 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008 VM Regions Near 0x8: --> __TEXT 00000001082e8000-00000001082e9000 [ 4K] r-x/rwx SM=COW /usr/local/Cellar/python/2.7.5/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 QtCore 0x000000010a1b34cb QObject::moveToThread(QThread*) + 17 1 QtDBus 0x000000010d55f98b QDBusDefaultConnection::QDBusDefaultConnection(QDBusConnection::BusType, char const*) + 171 2 QtDBus 0x000000010d55ebdf QDBusConnection::sessionBus() + 71 3 phonon 0x000000010d50228d Phonon::FactoryPrivate::FactoryPrivate() + 189 4 phonon 0x000000010d5024d5 Phonon::$_249::operator->() + 99 5 phonon 0x000000010d502991 Phonon::Factory::registerFrontendObject(Phonon::MediaNodePrivate*) + 17 6 phonon 0x000000010d50b27e Phonon::MediaNodePrivate::MediaNodePrivate(Phonon::MediaNodePrivate::CastId) + 80 7 phonon 0x000000010d50f570 Phonon::MediaObjectPrivate::MediaObjectPrivate() + 24 8 phonon 0x000000010d50be9d Phonon::MediaObject::MediaObject(QObject*) + 45 9 phonon.so 0x000000010d42f24a Sbk_Phonon_MediaObject_Init + 458 10 org.python.python 0x0000000108338707 type_call + 189 11 org.python.python 0x00000001082f74fd PyObject_Call + 101 12 org.python.python 0x00000001083714f0 PyEval_EvalFrameEx + 15525 13 org.python.python 0x0000000108373aaf fast_function + 182 14 org.python.python 0x0000000108370919 PyEval_EvalFrameEx + 12494 15 org.python.python 0x000000010836d721 PyEval_EvalCodeEx + 1638 16 org.python.python 0x000000010836d0b5 PyEval_EvalCode + 54 17 org.python.python 0x000000010838beb8 run_mod + 53 18 org.python.python 0x000000010838bf5f PyRun_FileExFlags + 137 19 org.python.python 0x000000010838baad PyRun_SimpleFileExFlags + 718 20 org.python.python 0x000000010839c58b Py_Main + 3039 21 libdyld.dylib 0x00007fff8e4fb5fd start + 1 Thread 1:: Dispatch queue: com.apple.libdispatch-manager 0 libsystem_kernel.dylib 0x00007fff8c938662 kevent64 + 10 1 libdispatch.dylib 0x00007fff923e743d _dispatch_mgr_invoke + 239 2 libdispatch.dylib 0x00007fff923e7152 _dispatch_mgr_thread + 52 Thread 2: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 3: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 4: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x00007feba0d19700 rbx: 0x000000010d5b7098 rcx: 0x00000000002f4180 rdx: 0x000000000012c040 rdi: 0x0000000000000000 rsi: 0x00007feba0d19700 rbp: 0x00007fff57917210 rsp: 0x00007fff579171d0 r8: 0x00007feba0fd5d10 r9: 0x00007feba0ff5310 r10: 0x0000000019c04cbe r11: 0x0000000070769b38 r12: 0x00007fff57917220 r13: 0x00007feba0c07190 r14: 0x0000000000000000 r15: 0x00007feba0fe1430 rip: 0x000000010a1b34cb rfl: 0x0000000000010202 cr2: 0x0000000000000008 Logical CPU: 0 Error Code: 0x00000004 Trap Number: 14 Anyone have any ideas about what is happening?

    Read the article

  • R Install/Update on Mac OS X (Snow Leopard): where does R put files during install/config?

    - by doug
    In sum, there's a stray preference-like file or two (probably just one) that i can't find. Here's the whole story: I recently attempted to update my R install from 2.10 to 2.11. As i have done before, i installed from source. I know that all of the dependencies are correctly installed and made available to R, because my prior install worked fine. When i upgraded to 2.11, i am unable to install packages (no exception thrown, it just doesn't appear to complete the install and is unresponsive so i have to quit + restart R. Given i install from source, there are any number of points in the process that i could have messed up. What i need to do now is "start over" which requires that i clear out my my prior install. I am having trouble doing that. There is still at least one preference file or something like that i can't find and one of these is causing the problem, so i need to find it and terminate it with extreme prejudice before i do a fresh install. Although i set a number of flags during the install, i have never opted out of the default install locations during the config step. There has to be one or more preference files still in my file structure (and that's also accessible to the new install of R) because after i follow all of the steps below, then do a fresh install, when i start R for the first time, some of my preferences have persisted (e.g., quartz settings, GUI background color, editor selection, etc.). Again, the problem is that i just cannot locate those files. Finally, the problem can't be that during my last install from source, i inadvertently caused a preference file to be sent to an off-spec location--because again, a fresh R install (whether from source or from the OS X binaries) is finding those files Here's what i've done prior to attempting a clean install of R: Removed files from these locations: ~/.RData ~/.RHistory /Applications/R64.app /Applications/R.app /Library/Frameworks/R.framework (i also removed all symlinks from these) Cleared all RAM and disk caches, in particular the directory where i know R caches: ~/Library/Caches/R* (in fact i've cleared this entire directory) Checked for all 'hidden' files in the OS X directories where login/startup files are often placed: /etc/ ~/ In addition, i've checked R-help, and i've also read through the relevant portions of 'R Installation and Administration'--no luck. I've also searched searched my file structure using the various bash utilities, which nearly always solves problems of this sort quite easily, but in this case obviously searching by name or even pattern is more problematic.

    Read the article

  • Postergres could not connect to server

    - by Gary Lai
    After I did brew update and brew upgrade, my postgres got some problem. I tried to uninstall postgres and install again, but it didn't work as well. This is the error message.(I also got this error message when I try to do rake db:migrate) $ psql psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? How can I solve it? Mac version: Mountain lion. homebrew version: 0.9.3 postgres version: psql (PostgreSQL) 9.2.1 And this is what I did. 12:30 ~/D/works$ brew uninstall postgresql Uninstalling /usr/local/Cellar/postgresql/9.2.1... 12:31 ~/D/works$ brew uninstall postgresql Uninstalling /usr/local/Cellar/postgresql/9.1.4... 12:31 ~/D/works$ psql --version bash: /usr/local/bin/psql: No such file or directory 12:33 ~/D/works$ brew install postgresql ==> Downloading http://ftp.postgresql.org/pub/source/v9.2.1/postgresql-9.2.1.tar.bz2 Already downloaded: /Library/Caches/Homebrew/postgresql-9.2.1.tar.bz2 ...... ...... ==> Summary /usr/local/Cellar/postgresql/9.2.1: 2814 files, 38M, built in 2.7 minutes 12:37 ~/D/works$ initdb /usr/local/var/postgres -E utf8 The files belonging to this database system will be owned by user "laigary". This user must also own the server process. The database cluster will be initialized with locale "en_US.UTF-8". The default text search configuration will be set to "english". initdb: directory "/usr/local/var/postgres" exists but is not empty If you want to create a new database system, either remove or empty the directory "/usr/local/var/postgres" or run initdb with an argument other than "/usr/local/var/postgres". 12:39 ~/D/works$ mkdir -p ~/Library/LaunchAgents 12:39 ~/D/works$ cp /usr/local/Cellar/postgresql/9.2.1/homebrew.mxcl.postgresql.plist ~/Library/LaunchAgents/ 12:39 ~/D/works$ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist homebrew.mxcl.postgresql: Already loaded 12:39 ~/D/works$ pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log start server starting 12:39 ~/D/works$ env ARCHFLAGS="-arch x86_64" gem install pg Building native extensions. This could take a while... Successfully installed pg-0.14.1 1 gem installed 12:42 ~/D/works$ psql --version psql (PostgreSQL) 9.2.1 12:42 ~/D/works$ psql psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"?

    Read the article

  • More GCC link time issues: undefined reference to main

    - by vikramtheone
    Hi Guys, I'm writing software for a Cortex-A8 processor and I have to write some ARM assembly code to access specific registers. I'm making use of the gnu compilers and related tool chains, these tools are installed on the processor board(Freescale i.MX515) with Ubuntu. I make a connection to it from my host PC(Windows) using WinSCP and the PuTTY terminal. As usual I started with a simple C project having main.c and functions.s. I compile the main.c using GCC, assemble the functions.s using as and link the generated object files using once again GCC, but I get strange errors during this process. An important finding - Meanwhile, I found out that my assembly code may have some issues because when I individually assemble it using the command as -o functions.o functions.s and try running the generated functions.o using ./functions.o command, the bash shell is failing to recognize this file as an executable(on pressing tab functions.o is not getting selected/PuTTY is not highlighting the file). Can anyone suggest whats happening here? Are there any specific options I have to send, to GCC during the linking process? The errors I see are strange and beyond my understanding, I don't understand to what the GCC is referring. I'm pasting here the contents of main.c, functions.s, the Makefile and the list of errors. Help, please!!! Vikram main.c #include <stdio.h> #include <stdlib.h> int main(void) { puts("!!!Hello World!!!"); /* prints !!!Hello World!!! */ return EXIT_SUCCESS; } functions.s * Main program */ .equ STACK_TOP, 0x20000800 .text .global _start .syntax unified _start: .word STACK_TOP, start .type start, function start: movs r0, #10 movs r1, #0 .end Makefile all: hello hello: main.o functions.o gcc -o main.o functions.o main.o: main.c gcc -c -mcpu=cortex-a8 main.c functions.o: functions.s as -mcpu=cortex-a8 -o functions.o functions.s Errors ubuntu@ubuntu-desktop:~/Documents/Project/Others/helloworld$ make gcc -c -mcpu=cortex-a8 main.c as -mcpu=cortex-a8 -o functions.o functions.s gcc -o main.o functions.o functions.o: In function `_start': (.text+0x0): multiple definition of `_start' /usr/lib/gcc/arm-linux-gnueabi/4.3.3/../../../crt1.o:init.c:(.text+0x0): first defined here /usr/lib/gcc/arm-linux-gnueabi/4.3.3/../../../crt1.o: In function `_start': init.c:(.text+0x30): undefined reference to `main' collect2: ld returned 1 exit status make: *** [hello] Error 1

    Read the article

  • Failed to obtain JDBC Driver for MySQL under Tomcat environment

    - by Michael Mao
    Hi all: I've been trying to obtain the Driver class for JDBC connection to MySQL. The workstation is running on Linux, Fedora 10. I have manually set up the classpath variable for Java by CLI like this: bash-3.2$ echo $CLASSPATH /home/cmao/public_html/jsp/mysql-connector-java-5.1.12-bin.jar This shows that I've added the lastest mysql connection jar archive to my CLASSPATH variable. I've created a test JSP page which can be found here And source code for this page is: <%@page language="java"%> <%@page import="java.sql.*"%> <%@page import="java.util.*"%> <html> <head> <title>UTS JDBC MySQL connection test page</title> </head> <body> <% Connection con = null; out.print("Java version is : " + System.getProperty("java.version") + "<br />"); out.print("Tomcat version is : " + application.getServerInfo() + "<br />"); out.print("Servlet version is: " + application.getMajorVersion() + "<br />"); out.print("JSP version is : " + JspFactory.getDefaultFactory().getEngineInfo().getSpecificationVersion() +"<br />"); //out.print("Java classpath is : " + System.getProperty("java.class.path")+ "<br />"); //out.print("JSP classpath is : " + appliaction.getAttribute("org.apache.catalina.jsp_classpath") + "<br />"); //out.print("Tomcat classpath is : " + System.getProperty("org.apache.tomcat.common.classpath") + "<br />"); try { Class c = Class.forName("com.mysql.jdbc.Driver"); } catch(Exception e) { out.println("Error! Failed to obtain JDBC driver for MySQL... Missing class \"com.mysql.jdbc.Driver\"<br />"); } %> </body> </html> None of those commented out line would work, various Jsper Expetions would be thrown. You can check those Error pages from the following links: classpath Error page catalina Error page tomcat Error page It seems, from my limited knowledge of JSP and Servlet, the Tomcat environment "ignores" my Java CLASSPATH? In which case I cannot configure the MySQL JDBC package to let my Servlets(a JSP is but a Servlet anyway) work. I am not sure how to fix this issue. would it be better if I use an IDE like Eclipse or NetBeans and create a real Java "web app" so that everything can be "self-configured" by the usage of a web.config XML configuration file? So that I can certainly bypass this Tomcat environment restriction? Many thanks for the suggestions in advance.

    Read the article

  • Having trouble wrapping functions in the linux kernel

    - by Corey Henderson
    I've written a LKM that implements Trusted Path Execution (TPE) into your kernel: https://github.com/cormander/tpe-lkm I run into an occasional kernel OOPS (describe at the end of this question) when I define WRAP_SYSCALLS to 1, and am at my wit's end trying to track it down. A little background: Since the LSM framework doesn't export its symbols, I had to get creative with how I insert the TPE checking into the running kernel. I wrote a find_symbol_address() function that gives me the address of any function I need, and it works very well. I can call functions like this: int (*my_printk)(const char *fmt, ...); my_printk = find_symbol_address("printk"); (*my_printk)("Hello, world!\n"); And it works fine. I use this method to locate the security_file_mmap, security_file_mprotect, and security_bprm_check functions. I then overwrite those functions with an asm jump to my function to do the TPE check. The problem is, the currently loaded LSM will no longer execute the code for it's hook to that function, because it's been totally hijacked. Here is an example of what I do: int tpe_security_bprm_check(struct linux_binprm *bprm) { int ret = 0; if (bprm->file) { ret = tpe_allow_file(bprm->file); if (IS_ERR(ret)) goto out; } #if WRAP_SYSCALLS stop_my_code(&cs_security_bprm_check); ret = cs_security_bprm_check.ptr(bprm); start_my_code(&cs_security_bprm_check); #endif out: return ret; } Notice the section between the #if WRAP_SYSCALLS section (it's defined as 0 by default). If set to 1, the LSM's hook is called because I write the original code back over the asm jump and call that function, but I run into an occasional kernel OOPS with an "invalid opcode": invalid opcode: 0000 [#1] SMP RIP: 0010:[<ffffffff8117b006>] [<ffffffff8117b006>] security_bprm_check+0x6/0x310 I don't know what the issue is. I've tried several different types of locking methods (see the inside of start/stop_my_code for details) to no avail. To trigger the kernel OOPS, write a simple bash while loop that endlessly starts a backgrounded "ls" command. After a minute or so, it'll happen. I'm testing this on a RHEL6 kernel, also works on Ubuntu 10.04 LTS (2.6.32 x86_64). While this method has been the most successful so far, I have tried another method of simply copying the kernel function to a pointer I created with kmalloc but when I try to execute it, I get: kernel tried to execute NX-protected page - exploit attempt? (uid: 0). If anyone can tell me how to kmalloc space and have it marked as executable, that would also help me solve the above problem. Any help is appreciated!

    Read the article

  • start apache2 in chroot environment

    - by xero
    This is my first time I am trying to install Apache2 HTTP server in a chroot environment. That's why i decided to follow this procedure : http://www.symantec.com/connect/articles/securing-apache-2-step-step my web server start with successful : root@ubuntu:/usr/local/apache2/bin/apachectl start [Tue Oct 29 01:49:15.879868 2013] [core:warn] [pid 10835] AH00117: Ignoring deprecated use of DefaultType in line 60 of /usr/local/apache2/conf/httpd.conf. AH00548: NameVirtualHost has no effect and will be removed in the next release /usr/local/apache2/conf/httpd.conf:81 AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message root@ubuntu:/chroot/httpd/etc# netstat -antu Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN But at the end of part "Chrooting the server" i have always the same problem. When i try to start apache2 in chroot i have always this error : root@ubuntu:/chroot/httpd/etc# chroot /chroot/httpd /usr/local/apache2/bin/apachectl chroot: failed to run command `/usr/local/apache2/bin/apachectl': No such file or directory however my apachectl file exist : root@ubuntu:/chroot/httpd/etc# ls -l /chroot/httpd/usr/local/apache2/bin/apachectl -rwxr-xr-x 1 root root 3437 Oct 29 02:28 /chroot/httpd/usr/local/apache2/bin/apachectl when I use strace to debug, there are errors with coreutils.mo and libc.mo : root@ubuntu:/chroot/httpd/etc# chroot /chroot/httpd /usr/local/apache2/bin/httpd group hosts nsswitch.conf passwd passwords resolv.conf root@ubuntu:/chroot/httpd/etc# strace chroot /chroot/httpd /usr/local/apache2/bin/apachectl execve("/usr/sbin/chroot", ["chroot", "/chroot/httpd", "/usr/local/apache2/bin/apachectl"], [/* 18 vars */]) = 0 brk(0) = 0x1e46000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe89563b000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=18263, ...}) = 0 mmap(NULL, 18263, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe895636000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\30\2\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1815224, ...}) = 0 mmap(NULL, 3929304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe89505b000 mprotect(0x7fe895210000, 2097152, PROT_NONE) = 0 mmap(0x7fe895410000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b5000) = 0x7fe895410000 mmap(0x7fe895416000, 17624, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe895416000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895635000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895634000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895633000 arch_prctl(ARCH_SET_FS, 0x7fe895634700) = 0 mprotect(0x7fe895410000, 16384, PROT_READ) = 0 mprotect(0x606000, 4096, PROT_READ) = 0 mprotect(0x7fe89563d000, 4096, PROT_READ) = 0 munmap(0x7fe895636000, 18263) = 0 brk(0) = 0x1e46000 brk(0x1e67000) = 0x1e67000 open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2919792, ...}) = 0 mmap(NULL, 2919792, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe894d92000 close(3) = 0 chroot("/chroot/httpd") = 0 chdir("/") = 0 execve("/usr/local/apache2/bin/apachectl", ["/usr/local/apache2/bin/apachectl"], [/* 18 vars */]) = -1 ENOENT (No such file or directory) open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) write(2, "chroot: ", 8chroot: ) = 8 write(2, "failed to run command `/usr/loca"..., 56failed to run command `/usr/local/apache2/bin/apachectl') = 56 open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) write(2, ": No such file or directory", 27: No such file or directory) = 27 write(2, "\n", 1 ) = 1 close(1) = 0 close(2) = 0 exit_group(127) = ? using the tutorial I did not find and copie libraries following on my server. I suppose there is no link with coreutils.mo and libc.mo : /usr/libexec/ld-elf.so.1 /var/run/ld-elf.so.hints I don't understand what files i forgot to copy in my chroot environment to be able to start my apache2. Any ideas ?

    Read the article

  • How to start dovecot?

    - by chudapati09
    I'm building a web server to host multiple websites. I got everything working except the mail server. I'm using linode to host my vps and I've been following their tutorials. FYI, I'm using Ubuntu 11.10. Here is the link I've been following, http://library.linode.com/email/postfix/dovecot-mysql-ubuntu-10.04-lucid. I got up to the part where it tells me to restart dovecot, so I tried "service dovecot restart". But then I get this "restart: Unknown instance:". I'm logged in as root, so I'm not using sudo. Since that didn't work I tried "/etc/init.d/dovecot restart" and I get "dovecot start/running, process 4760". So I try "/etc/init.d/dovecot status" and I get "dovecot stop/waiting". So I tried "service dovecot start" and I get "dovecot start/running, process 4781". So I tried to get the status, so I tired "service dovecot status" and got "dovecot stop/waiting" Then I tired "/etc/init.d/dovecot start" and I get "dovecot start/running, process 4794". So I tired to get the status, so I tired "/etc/init.d/dovecot status" and got "dovecot stop/waiting" Just for kicks and giggles I tired to kill the process, I used the PID that I got when I did "service dovecot start", this was the command "kill -9 4444" and I get this "bash: kill: (4805) - No such process" Am I doing something wrong? --EDIT 1-- The following are logs that were found in /var/log/syslog that involved dovecot dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled) dovecot: ssl-params: Generating SSL parameters dovecot: ssl-params: SSL parameters regeneration completed dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) kernel: init: dovecot main process (10276) terminated with status 89 kernel: init: dovecot main process (10289) terminated with status 89 kernel: init: dovecot main process (10452) terminated with status 89 kernel: init: dovecot main process (2275) terminated with status 89 kernel: init: dovecot main process (3028) terminated with status 89 kernel: init: dovecot main process (3216) terminated with status 89 kernel: init: dovecot main process (3230) terminated with status 89 kernel: init: dovecot main process (3254) terminated with status 89 kernel: init: dovecot main process (3813) terminated with status 89 kernel: init: dovecot main process (3845) terminated with status 89 kernel: init: dovecot main process (4664) terminated with status 89 kernel: init: dovecot main process (4760) terminated with status 89 kernel: init: dovecot main process (4781) terminated with status 89 kernel: init: dovecot main process (4794) terminated with status 89 kernel: init: dovecot main process (4805) terminated with status 89 --Edit 2 (/etc/dovecot/dovecot.conf)-- The following is the dovecot.conf file protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/home/vmail/%d/%n/Maildir ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem namespace private { separator = . prefix = INBOX. inbox = yes } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster@[mydomainname.com] mail_plugins = sieve global_script_path = /home/vmail/globalsieverc } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default { user = root passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb static { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } -- Edit 3 (/var/log/mail.log) -- The following is what is in /var/log/mail.log dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled) dovecot: ssl-params: Generating SSL parameters postfix/master[9917]: daemon started -- version 2.8.5, configuration /etc/postfix dovecot: ssl-params: SSL parameters regeneration completed postfix/master[9917]: terminating on signal 15 postfix/master[10196]: daemon started -- version 2.8.5, configuration /etc/postfix dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) postfix/master[2435]: daemon started -- version 2.8.5, configuration /etc/postfix postfix/master[2435]: terminating on signal 15 postfix/master[2965]: daemon started -- version 2.8.5, configuration /etc/postfix

    Read the article

  • Does likewise-open > version 5.4 contain CIFS support?

    - by Ben Andken
    I'm trying to get the CIFS server working in likewise-open. I've found this set of instructions and everything seems to work until I try to connect ([url]http://www.likewise.com/resources/documentation_library/manuals/cifs/likewise-cifs-smb-file-server-guide.html#id2765992):[/url] 1.6. Build and Configure a Standalone Likewise-CIFS Server This section demonstrates how to build and configure a standalone instance of Likewise-CIFS from the command line. The following procedure assumes that you want to set up Likewise-CIFS on a Linux server to share files with Windows computers in a network without Active Directory. This procedure also assumes you know how to build Linux applications from their source code and then install them. Download Likewise-CIFS from its open source git location: $ git clone git://git.likewiseopen.org/ Download, build, and install the following tools. The tools listed are known to work, but earlier or later versions might work as well. Also, instead of downloading the tools, you might be able to install them on your platform with apt-get or some other means. http://ftp.gnu.org/gnu/autoconf/autoconf-2.65.tar.gz http://ftp.gnu.org/gnu/automake/automake-1.9.6.tar.gz http://ftp.gnu.org/gnu/libtool/libtool-2.2.6a.tar.gz http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz gcc --version 3.x or greater Build Likewise-CIFS: $ cd likewise-open $ build/mkcomp --debug all Install Likewise-CIFS: $ sudo su $ cd staging/install-root $ tar cf - . | (cd / && tar xvf -) Make sure Samba is not running: $ /etc/init.d/smb stop Make sure SELinux is either disabled or set to permissive. Make sure the ports required by Likewise are open. For a list of ports that Likewise uses, see the Likewise Open Installation and Administration Guide. Configure Likewise Open: $ /etc/init.d/lwsmd start $ for i in /etc/likewise/*.reg; do /opt/likewise/bin/lwregshell upgrade $i; done $ /etc/init.d/lwsmd stop $ /etc/init.d/lwsmd start $ /opt/likewise/bin/lwsm start srvsvc $ /opt/likewise/bin/domainjoin-cli configure --enable nsswitch Add a user account to the local Likewise provider database. In the following example, substitute the account name that you want for newuser. $ /opt/likewise/bin/lw-add-user --home /home/newuser --shell /bin/bash newuser Successfully added user newuser Enable the user and set the password: $ /opt/likewise/bin/lw-mod-user --enable-user --set-password newuser New Password: ********** Successfully modified user newuser Look up new user's identity as follows. Substitute the value from the command hostname -s for the hostname. Keep in mind that Likewise truncates a hostname longer than 15 characters to the first 15 characters of the string. % id hostname\\newuser uid=2000(HOSTNAME\newuser) gid=1800(HOSTNAME\Likewise Users) groups=1800(HOSTNAME\Likewise Users) context=system_u:system_r:unconfined_t:s0 Make a CIFS directory for the user: mkdir /lwcifs/newuser chown 2000:1800 /lwcifs/newuser From a Windows computer, map the Likewise-CIFS drive share: Computer->Map Network Drive... Folder: \\IP_hostname\c$ Click "Finish" Username: hostname\newuser Password: user_password The last step fails when I try to connect. I've tried with Windows XP Pro and Windows 7 Pro. The rest of the directions only appear to work for version 5.4 (the one that shipped with 10.04). For 12.04, version 6.1 is the only one available and it doesn't appear to have the srvsvc module mentioned in these instructions. Is CIFS support dropped in the 6.1 version of likewise-open?

    Read the article

  • Sharing the same `ssh-agent` among multiple login sessions

    - by intuited
    Is there a convenient way to ensure that all logins from a given user (ie me) use the same ssh-agent? I hacked out a script to make this work most of the time, but I suspected all along that there was some way to do it that I had just missed. Additionally, since that time there have been amazing advances in computing technology, like for example this website. So the goal here is that whenever I log in to the box, regardless of whether it's via SSH, or in a graphical session started from gdm/kdm/etc, or at a console: if my username does not currently have an ssh-agent running, one is started, the environment variables exported, and ssh-add called. otherwise, the existing agent's coordinates are exported in the login session's environment variables. This facility is especially valuable when the box in question is used as a relay point when sshing into a third box. In this case it avoids having to type in the private key's passphrase every time you ssh in and then want to, for example, do git push or something. The script given below does this mostly reliably, although it botched recently when X crashed and I then started another graphical session. There might have been other screwiness going on in that instance. Here's my bad-is-good script. I source this from my .bashrc. # ssh-agent-procure.bash # v0.6.4 # ensures that all shells sourcing this file in profile/rc scripts use the same ssh-agent. # copyright me, now; licensed under the DWTFYWT license. mkdir -p "$HOME/etc/ssh"; function ssh-procure-launch-agent { eval `ssh-agent -s -a ~/etc/ssh/ssh-agent-socket`; ssh-add; } if [ ! $SSH_AGENT_PID ]; then if [ -e ~/etc/ssh/ssh-agent-socket ] ; then SSH_AGENT_PID=`ps -fC ssh-agent |grep 'etc/ssh/ssh-agent-socket' |sed -r 's/^\S+\s+(\S+).*$/\1/'`; if [[ $SSH_AGENT_PID =~ [0-9]+ ]]; then # in this case the agent has already been launched and we are just attaching to it. ##++ It should check that this pid is actually active & belongs to an ssh instance export SSH_AGENT_PID; SSH_AUTH_SOCK=~/etc/ssh/ssh-agent-socket; export SSH_AUTH_SOCK; else # in this case there is no agent running, so the socket file is left over from a graceless agent termination. rm ~/etc/ssh/ssh-agent-socket; ssh-procure-launch-agent; fi; else ssh-procure-launch-agent; fi; fi; Please tell me there's a better way to do this. Also please don't nitpick the inconsistencies/gaffes ( eg putting var stuff in etc ); I wrote this a while ago and have since learned many things.

    Read the article

  • Improving SAS multipath to JBOD performance on Linux

    - by user36825
    Hello all I'm trying to optimize a storage setup on some Sun hardware with Linux. Any thoughts would be greatly appreciated. We have the following hardware: Sun Blade X6270 2* LSISAS1068E SAS controllers 2* Sun J4400 JBODs with 1 TB disks (24 disks per JBOD) Fedora Core 12 2.6.33 release kernel from FC13 (also tried with latest 2.6.31 kernel from FC12, same results) Here's the datasheet for the SAS hardware: http://www.sun.com/storage/storage_networking/hba/sas/PCIe.pdf It's using PCI Express 1.0a, 8x lanes. With a bandwidth of 250 MB/sec per lane, we should be able to do 2000 MB/sec per SAS controller. Each controller can do 3 Gb/sec per port and has two 4 port PHYs. We connect both PHYs from a controller to a JBOD. So between the JBOD and the controller we have 2 PHYs * 4 SAS ports * 3 Gb/sec = 24 Gb/sec of bandwidth, which is more than the PCI Express bandwidth. With write caching enabled and when doing big writes, each disk can sustain about 80 MB/sec (near the start of the disk). With 24 disks, that means we should be able to do 1920 MB/sec per JBOD. multipath { rr_min_io 100 uid 0 path_grouping_policy multibus failback manual path_selector "round-robin 0" rr_weight priorities alias somealias no_path_retry queue mode 0644 gid 0 wwid somewwid } I tried values of 50, 100, 1000 for rr_min_io, but it doesn't seem to make much difference. Along with varying rr_min_io I tried adding some delay between starting the dd's to prevent all of them writing over the same PHY at the same time, but this didn't make any difference, so I think the I/O's are getting properly spread out. According to /proc/interrupts, the SAS controllers are using a "IR-IO-APIC-fasteoi" interrupt scheme. For some reason only core #0 in the machine is handling these interrupts. I can improve performance slightly by assigning a separate core to handle the interrupts for each SAS controller: echo 2 /proc/irq/24/smp_affinity echo 4 /proc/irq/26/smp_affinity Using dd to write to the disk generates "Function call interrupts" (no idea what these are), which are handled by core #4, so I keep other processes off this core too. I run 48 dd's (one for each disk), assigning them to cores not dealing with interrupts like so: taskset -c somecore dd if=/dev/zero of=/dev/mapper/mpathx oflag=direct bs=128M oflag=direct prevents any kind of buffer cache from getting involved. None of my cores seem maxed out. The cores dealing with interrupts are mostly idle and all the other cores are waiting on I/O as one would expect. Cpu0 : 0.0%us, 1.0%sy, 0.0%ni, 91.2%id, 7.5%wa, 0.0%hi, 0.2%si, 0.0%st Cpu1 : 0.0%us, 0.8%sy, 0.0%ni, 93.0%id, 0.2%wa, 0.0%hi, 6.0%si, 0.0%st Cpu2 : 0.0%us, 0.6%sy, 0.0%ni, 94.4%id, 0.1%wa, 0.0%hi, 4.8%si, 0.0%st Cpu3 : 0.0%us, 7.5%sy, 0.0%ni, 36.3%id, 56.1%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 1.3%sy, 0.0%ni, 85.7%id, 4.9%wa, 0.0%hi, 8.1%si, 0.0%st Cpu5 : 0.1%us, 5.5%sy, 0.0%ni, 36.2%id, 58.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 5.0%sy, 0.0%ni, 36.3%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 5.1%sy, 0.0%ni, 36.3%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu8 : 0.1%us, 8.3%sy, 0.0%ni, 27.2%id, 64.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu9 : 0.1%us, 7.9%sy, 0.0%ni, 36.2%id, 55.8%wa, 0.0%hi, 0.0%si, 0.0%st Cpu10 : 0.0%us, 7.8%sy, 0.0%ni, 36.2%id, 56.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 0.0%us, 7.3%sy, 0.0%ni, 36.3%id, 56.4%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 0.0%us, 5.6%sy, 0.0%ni, 33.1%id, 61.2%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 0.1%us, 5.3%sy, 0.0%ni, 36.1%id, 58.5%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 0.0%us, 4.9%sy, 0.0%ni, 36.4%id, 58.7%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 0.1%us, 5.4%sy, 0.0%ni, 36.5%id, 58.1%wa, 0.0%hi, 0.0%si, 0.0%st Given all this, the throughput reported by running "dstat 10" is in the range of 2200-2300 MB/sec. Given the math above I would expect something in the range of 2*1920 ~= 3600+ MB/sec. Does anybody have any idea where my missing bandwidth went? Thanks!

    Read the article

  • Broken cups installation on a ubuntu server 64

    - by user67046
    Hi, I am having trouble with an cups installation. It seems to be in a broken state. When i try to reinstall it it stalls, the same if i try to remove it completely. I am running the server version 64 bit of Ubuntu 10.10 with kernel Linux version 2.6.35-22-server. When i try to start the cups daemon with the following command sudo service cups start It just stays there and nothing happens. I have tried to remove it, to be able to reinstall it, with the following command sudo apt-get purge cups It finally stalls with the following message Removing cups ... After that nothing happens. The process tree for the apt-get command looks like this. 1404 1404 1404 ? 00:00:00 sshd 26495 26495 26495 ? 00:00:00 sshd 26581 26495 26495 ? 00:00:00 sshd 26582 26582 26582 pts/4 00:00:00 bash 27158 27158 26582 pts/4 00:00:00 apt-get 27172 27172 27172 pts/2 00:00:00 dpkg 27176 27172 27172 pts/2 00:00:00 cups.prerm 27178 27172 27172 pts/2 00:00:00 stop I have tried to leave the process running for a while to see if i get any error messages but without success. To get out of it I have to kill the processes. sudo dpkg --configure cups dpkg: error processing cups (--configure): package cups is already installed and configured Errors were encountered while processing: cups sudo dpkg --status cups Package: cups Status: purge ok installed Priority: optional Section: net Installed-Size: 8292 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Version: 1.4.4-6ubuntu2.3 Replaces: cupsddk-drivers (<< 1.4.0) Provides: cupsddk-drivers Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.7), libcups2 (>= 1.4.4-3~), libcupscgi1 (>= 1.4.2), libcupsdriver1 (>= 1.4.0), libcupsimage2 (>= 1.4.0), libcupsmime1 (>= 1.4.0), libcupsppdc1 (>= 1.4.0), libdbus-1-3 (>= 1.0.2), libgcc1 (>= 1:4.1.1), libgnutls26 (>= 2.7.14-0), libgssapi-krb5-2 (>= 1.8+dfsg), libijs-0.35, libkrb5-3 (>= 1.6.dfsg.2), libldap-2.4-2 (>= 2.4.7), libpam0g (>= 0.99.7.1), libpaper1, libpoppler7, libslp1, libstdc++6 (>= 4.1.1), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), debconf (>= 1.2.9) | debconf-2.0, upstart-job, poppler-utils (>= 0.12), procps, ghostscript, lsb-base (>= 3), cups-common (>= 1.4.4), cups-client (>= 1.4.4-6ubuntu2.3), ssl-cert (>= 1.0.11), adduser, bc, ttf-freefont, cups-ppdc Recommends: foomatic-filters (>= 4.0), cups-driver-gutenprint, ghostscript-cups Suggests: cups-bsd, foomatic-db-compressed-ppds | foomatic-db, hplip, xpdf-korean | xpdf-japanese | xpdf-chinese-traditional | xpdf-chinese-simplified, cups-pdf, smbclient (>= 3.0.9), udev Breaks: foomatic-filters (<< 4.0) Conflicts: cupsddk-drivers (<< 1.4.0) Conffiles: /etc/fonts/conf.d/99pdftoopvp.conf a5221cfad70a981c80864229ef56586d /etc/logrotate.d/cups 5bb41fa9900f0d1c565954405a2bd7c4 /etc/default/cups 2b436fbb1a32b82b6aba45a76a1d7e40 /etc/pam.d/cups ff2488324854f7b1e892bb0df062d5f0 /etc/init/cups.conf 1a3cd022e8474e3d2b44640f33ce68e3 /etc/ufw/applications.d/cups 29e98a6d850da251e180c3d68dec2bd3 /etc/apparmor.d/usr.sbin.cupsd 60c4b26bfd5c033baa3dd48a3b2e9911 /etc/cups/cupsd.conf e2c7ec15835ea0939e5e86f7c6efcc03 /etc/cups/snmp.conf 2326a8af1e112676d55245bc5eb459ca /etc/cups/cupsd.conf.default a68d54d76021e857dd1d64edf57d36c5 Description: Common UNIX Printing System(tm) - server The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the CUPS scheduler/daemon and related files. Original-Maintainer: Debian CUPS Maintainers <[email protected]> Would be greatful if someone could provide some help on how to solve this issue.

    Read the article

  • Cloudformation with Ubuntu throwing errors

    - by Sammaye
    I have been doing some reading and have come to the understanding that if you wish to use a launchConfig with Ubuntu you will need to install the cfn-init file yourself which I have done: "Properties" : { "KeyName" : { "Ref" : "KeyName" }, "SpotPrice" : "0.05", "ImageId" : { "Fn::FindInMap" : [ "AWSRegionArch2AMI", { "Ref" : "AWS::Region" }, { "Fn::FindInMap" : [ "AWSInstanceType2Arch", { "Ref" : "InstanceType" }, "Arch" ] } ] }, "SecurityGroups" : [ { "Ref" : "InstanceSecurityGroup" } ], "InstanceType" : { "Ref" : "InstanceType" }, "UserData" : { "Fn::Base64" : { "Fn::Join" : ["", [ "#!/bin/bash\n", "apt-get -y install python-setuptools\n", "easy_install https://s3.amazonaws.com/cloudformation-examples/aws-cfn-bootstrap-1.0-6.tar.gz\n", "cfn-init ", " --stack ", { "Ref" : "AWS::StackName" }, " --resource LaunchConfig ", " --configset ALL", " --access-key ", { "Ref" : "WorkerKeys" }, " --secret-key ", {"Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, " --region ", { "Ref" : "AWS::Region" }, " || error_exit 'Failed to run cfn-init'\n" ]]}} But I have a problem with this setup that I cannot seem to get a decent answer to. I keep getting this error in the logs: Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: config-scripts-per-once already ran once Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-boot with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-per-instance with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling scripts-user with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cc_scripts_user.py[WARNING]: failed to run-parts in /var/lib/cloud/instance/scripts Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[WARNING]: Traceback (most recent call last):#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 117, in run_cc_modules#012 cc.handle(name, run_args, freq=freq)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/__init__.py", line 78, in handle#012 [name, self.cfg, self.cloud, cloudinit.log, args])#012 File "/usr/lib/python2.7/dist-packages/cloudinit/__init__.py", line 326, in sem_and_run#012 func(*args)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/CloudConfig/cc_scripts_user.py", line 31, in handle#012 util.runparts(runparts_path)#012 File "/usr/lib/python2.7/dist-packages/cloudinit/util.py", line 223, in runparts#012 raise RuntimeError('runparts: %i failures' % failed)#012RuntimeError: runparts: 1 failures Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[ERROR]: config handling of scripts-user, None, [] failed Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling keys-to-console with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling phone-home with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] __init__.py[DEBUG]: handling final-message with freq=None and args=[] Jun 15 12:02:34 ip-0 [CLOUDINIT] cloud-init-cfg[ERROR]: errors running cloud_config [final]: ['scripts-user'] I have absolutely no idea what scripts-user means and Google is not helping much here either. I can, when I ssh into the server, see that it runs the userdata script since I can access cfn-init as a command whereas I cannot in the original AMI the instance is made from. However I have a launchConfig: "Comment" : "Install a simple PHP application", "AWS::CloudFormation::Init" : { "configSets" : { "ALL" : ["WorkerRole"] }, "WorkerRole" : { "files" : { "/etc/cron.d/worker.cron" : { "content" : "*/1 * * * * ubuntu /home/ubuntu/worker_cron.php &> /home/ubuntu/worker.log\n", "mode" : "000644", "owner" : "root", "group" : "root" }, "/home/ubuntu/worker_cron.php" : { "content" : { "Fn::Join" : ["", [ "#!/usr/bin/env php", "<?php", "define('ROOT', dirname(__FILE__));", "const AWS_KEY = \"", { "Ref" : "WorkerKeys" }, "\";", "const AWS_SECRET = \"", { "Fn::GetAtt": ["WorkerKeys", "SecretAccessKey"]}, "\";", "const QUEUE = \"", { "Ref" : "InputQueue" }, "\";", "exec('git clone x '.ROOT.'/worker');", "if(!file_exists(ROOT.'/worker/worker_despatcher.php')){", "echo 'git not downloaded right';", "exit();", "}", "echo 'git downloaded';", "include_once ROOT.'/worker/worker_despatcher.php';" ]]}, "mode" : "000755", "owner" : "ubuntu", "group" : "ubuntu" } } } } Which does not seem to run at all. I have checked for the files existance in my home directory and it's not there. I have checked for the cronjob entry and it's not there either. I cannot, after reading through the documentation, seem to see what's potentially wrong with my code. Any thoughts on why this is not working? Am I missing something blatant?

    Read the article

  • Postfix "warning: cannot get RSA private key from file"

    - by phew
    I just followed this tutorial to set up a postfix mailserver with dovecot and mysql as backend for virtual users. Now I got the most parts working, I can connect to pop3 pop3s imap and imaps. Using echo TEST-MAIL | mail [email protected] works fine, when I log into my hotmail account it shows the email. It also works in reverse hence my MX entry for mydomain.com finally has been propagated, so I am being able to receive emails sent from [email protected] to [email protected] and view them in Thunderbird using STARTTLS via IMAP. Doing a bit more research after I got the error message "5.7.1 : Relay access denied" when trying to send mails to [email protected] using Thunderbird being logged into [email protected], I figured out that my server was acting as an "Open Mail Relay", which - ofcourse - is a bad thing. Digging more into the optional parts of the tutorial like shown workaround.org/comment/2536 and workaround.org/ispmail/squeeze/postfix-smtp-auth I decided to complete these steps aswell to be able to send mails via [email protected] through Mozilla Thunderbird, not getting the error message "5.7.1 : Relay access denied" anymore (as common mailservers reject open relayed emails). But now I ran into an error trying to get postfix working with SMTPS, in /var/log/mail.log it reads Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: cannot get RSA private key from file /etc/ssl/certs/postfix.pem: disabling TLS support Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:650:Expecting: ANY PRIVATE KEY: Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib:ssl_rsa.c:669: That error is logged right after I try to send a mail from my newly installed mailserver using SMTP SSL/TLS via port 465 in Thunderbird. Thunderbird then tells me a timeout occured. Google has a few results concerning that problem, yet I couldn't get it working with any of those. I would link some of them here but as a new user I am only allowed to use two hyperlinks. My /etc/postfix/master.cf looks like smtp inet n - - - - smtpd smtps inet n - - - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes and nmap tells me PORT STATE SERVICE [...] 465/tcp open smtps [...] my /etc/postfix/main.cf looks like smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no append_dot_mydomain = no readme_directory = no #smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem #default postfix generated #smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key #default postfix generated smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smptd_tls_key_file = /etc/ssl/private/postfix.pem smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smptd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination myhostname = mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost.com, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf virtual_transport = dovecot dovecot_destination_recipient_limit = 1 mailbox_command = /usr/lib/dovecot/deliver The *.pem files were created like described in the tutorial above, using Postfix To create a certificate to be used by Postfix use: openssl req -new -x509 -days 3650 -nodes -out /etc/ssl/certs/postfix.pem -keyout /etc/ssl/private/postfix.pem Do not forget to set the permissions on the private key so that no unauthorized people can read it: chmod o= /etc/ssl/private/postfix.pem You will have to tell Postfix where to find your certificate and private key because by default it will look for a dummy certificate file called "ssl-cert-snakeoil": postconf -e smtpd_tls_cert_file=/etc/ssl/certs/postfix.pem postconf -e smtpd_tls_key_file=/etc/ssl/private/postfix.pem I think I don't have to include /etc/dovecot/dovecot.conf here, as login via imaps and pop3s works fine according to the logs. Only problem is making postfix properly use the self-generated, self-signed certificates. Any help appreciated! EDIT: I just tried this different tutorial on generating a self-signed certificate for postfix, still getting the same error. I really don't know what else to test. I also did check for the SSL libraries, but all seems to be fine: root@domain:~# ldd /usr/sbin/postfix linux-vdso.so.1 => (0x00007fff91b25000) libpostfix-global.so.1 => /usr/lib/libpostfix-global.so.1 (0x00007f6f8313d000) libpostfix-util.so.1 => /usr/lib/libpostfix-util.so.1 (0x00007f6f82f07000) libssl.so.0.9.8 => /usr/lib/libssl.so.0.9.8 (0x00007f6f82cb1000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007f6f82910000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00007f6f826f7000) libdb-4.8.so => /usr/lib/libdb-4.8.so (0x00007f6f8237c000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007f6f82164000) libresolv.so.2 => /lib/libresolv.so.2 (0x00007f6f81f4e000) libc.so.6 => /lib/libc.so.6 (0x00007f6f81beb000) libdl.so.2 => /lib/libdl.so.2 (0x00007f6f819e7000) libz.so.1 => /usr/lib/libz.so.1 (0x00007f6f817d0000) libpthread.so.0 => /lib/libpthread.so.0 (0x00007f6f815b3000) /lib64/ld-linux-x86-64.so.2 (0x00007f6f83581000) After following Ansgar Wiechers instructions its finally working. postconf -n contained the lines as it should. The certificate/key check via openssl did show that both files are valid. So it indeed has been a permissions problem! Didn't know that chown'ing the /etc/ssl/*/postfix.pem files to postfix:postfix is not enough for postfix to read the files.

    Read the article

  • Using Upstart to manage Unicorn w/ rbenv + bundler binstubs w/ ruby-local-exec shebang

    - by codykrieger
    Alright, this is melting my brain. It might have something to do with the fact that I don't understand Upstart as well as I should. Sorry in advance for the long question. I'm trying to use Upstart to manage a Rails app's Unicorn master process. Here is my current /etc/init/app.conf: description "app" start on runlevel [2] stop on runlevel [016] console owner # expect daemon script APP_ROOT=/home/deploy/app PATH=/home/deploy/.rbenv/shims:/home/deploy/.rbenv/bin:$PATH $APP_ROOT/bin/unicorn -c $APP_ROOT/config/unicorn.rb -E production # >> /tmp/upstart.log 2>&1 end script # respawn That works just fine - the Unicorns start up great. What's not great is that the PID detected is not of the Unicorn master, it's of an sh process. That in and of itself isn't so bad, either - if I wasn't using the automagical Unicorn zero-downtime deployment strategy. Because shortly after I send -USR2 to my Unicorn master, a new master spawns up, and the old one dies...and so does the sh process. So Upstart thinks my job has died, and I can no longer restart it with restart or stop it with stop if I want. I've played around with the config file, trying to add -D to the Unicorn line (like this: $APP_ROOT/bin/unicorn -c $APP_ROOT/config/unicorn.rb -E production -D) to daemonize Unicorn, and I added the expect daemon line, but that didn't work either. I've tried expect fork as well. Various combinations of all of those things can cause start and stop to hang, and then Upstart gets really confused about the state of the job. Then I have to restart the machine to fix it. I think Upstart is having problems detecting when/if Unicorn is forking because I'm using rbenv + the ruby-local-exec shebang in my $APP_ROOT/bin/unicorn script. Here it is: #!/usr/bin/env ruby-local-exec # # This file was generated by Bundler. # # The application 'unicorn' is installed as part of a gem, and # this file is here to facilitate running it. # require 'pathname' ENV['BUNDLE_GEMFILE'] ||= File.expand_path("../../Gemfile", Pathname.new(__FILE__).realpath) require 'rubygems' require 'bundler/setup' load Gem.bin_path('unicorn', 'unicorn') Additionally, the ruby-local-exec script looks like this: #!/usr/bin/env bash # # `ruby-local-exec` is a drop-in replacement for the standard Ruby # shebang line: # # #!/usr/bin/env ruby-local-exec # # Use it for scripts inside a project with an `.rbenv-version` # file. When you run the scripts, they'll use the project-specified # Ruby version, regardless of what directory they're run from. Useful # for e.g. running project tasks in cron scripts without needing to # `cd` into the project first. set -e export RBENV_DIR="${1%/*}" exec ruby "$@" So there's an exec in there that I'm worried about. It fires up a Ruby process, which fires up Unicorn, which may or may not daemonize itself, which all happens from an sh process in the first place...which makes me seriously doubt the ability of Upstart to track all of this nonsense. Is what I'm trying to do even possible? From what I understand, the expect stanza in Upstart can only be told (via daemon or fork) to expect a maximum of two forks.

    Read the article

  • Exposing the AnyConnect HTTPS service to outside network

    - by Maciej Swic
    We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the following log output: 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Built inbound TCP connection 2889 for outside:<client-ip>/51000 (<client-ip>/51000) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Built inbound TCP connection 2890 for outside:<client-ip>/50999 (<client-ip>/50999) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Teardown TCP connection 2889 for outside:<client-ip>/51000 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Teardown TCP connection 2890 for outside:<client-ip>/50999 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency We finished the startup wizard and the anyconnect vpn wizard and here is the resulting configuration: Cryptochecksum: 12262d68 23b0d136 bb55644a 9c08f86b : Saved : Written by enable_15 at 07:08:30.519 UTC Mon Nov 12 2012 ! ASA Version 9.0(1) ! hostname vpn domain-name office.<redacted>.com enable password <redacted> encrypted passwd <redacted> encrypted names ip local pool vpn-pool 192.168.67.2-192.168.67.253 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.68.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address <redacted> 255.255.255.248 ! ftp mode passive dns server-group DefaultDNS domain-name office.<redacted>.com object network obj_any subnet 0.0.0.0 0.0.0.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network obj_any nat (inside,outside) dynamic interface timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL http server enable http 192.168.68.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=vpn proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491 <redacted> quit crypto ca certificate chain ASDM_TrustPoint0 certificate f678a050 <redacted> quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.68.0 255.255.255.0 inside ssh timeout 5 console timeout 0 vpn-addr-assign local reuse-delay 60 dhcpd auto_config outside ! dhcpd address 192.168.68.254-192.168.68.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ssl trust-point ASDM_TrustPoint0 inside ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside enable inside anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1 anyconnect image disk0:/anyconnect-linux-3.1.01065-k9.pkg 2 anyconnect image disk0:/anyconnect-macosx-i386-3.1.01065-k9.pkg 3 anyconnect profiles GM-AnyConnect_client_profile disk0:/GM-AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_GM-AnyConnect internal group-policy GroupPolicy_GM-AnyConnect attributes wins-server none dns-server value 192.168.68.254 vpn-tunnel-protocol ikev2 ssl-client default-domain value office.<redacted>.com webvpn anyconnect profiles value GM-AnyConnect_client_profile type user username <redacted> password <redacted> encrypted tunnel-group GM-AnyConnect type remote-access tunnel-group GM-AnyConnect general-attributes address-pool vpn-pool default-group-policy GroupPolicy_GM-AnyConnect tunnel-group GM-AnyConnect webvpn-attributes group-alias GM-AnyConnect enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context call-home reporting anonymous Cryptochecksum:12262d6823b0d136bb55644a9c08f86b : end Clearly we are missing something, but the question is, what?

    Read the article

  • KVM Slow performance on XP Guest

    - by Gregg Leventhal
    The system is very slow to do anything, even browse a local folder, and CPU sits at 100% frequently. Guest is XP 32 bit. Host is Scientific Linux 6.2, Libvirt 0.10, Guest XP OS shows ACPI Multiprocessor HAL and a virtIO driver for NIC and SCSI. Installed. CPUInfo on host: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping : 7 cpu MHz : 3200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6784.93 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static' cpuset='0'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>SandyBridge</model> <vendor>Intel</vendor> <feature policy='require' name='vme'/> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='osxsave'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='ds'/> <feature policy='require' name='tsc-deadline'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='ht'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='force' name='sse'/> <feature policy='force' name='sse2'/> <feature policy='force' name='sse4.1'/> <feature policy='force' name='sse4.2'/> <feature policy='force' name='ssse3'/> <feature policy='force' name='x2apic'/> </cpu> <clock offset='localtime'> <timer name='rtc' tickpolicy='catchup'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none'/> <source file='/var/lib/libvirt/images/Server-10-9-13.qcow2'/> <target dev='vda' bus='virtio'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </disk>

    Read the article

  • multi-user rvm gem install failure when called from CloudFormation::Init

    - by Peter Mounce
    I've taken an Amazon Linux AMI (based on CentOS) and installed RVM (1.10.3) to it in multi-user fashion (see {1} below). I used that to install ruby 1.9.3-p125, rubygems 1.8.17, and bundler 1.1 as the baseline requirements for most things I'm going to be using the instances for. I've captured that instance to an AMI, and am now launching it via CloudFormation, with some CloudFormation::Init commands. One of them is to use s3cmd to pull down a private gem from S3, and the next one, the one that fails, is to install that gem. It fails with an error message 2012-03-15 16:53:20,201 [ERROR] Command 20_install_gems (/usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem install ./*.gem) failed 2012-03-15 16:53:20,202 [DEBUG] Command 20_install_gems output: /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12:in `require': no such file to load -- rubygems (LoadError) from /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12 Now, that happens during the cfn-init execution - I assume, but haven't checked yet, that cfn-init is being run with an environment different from that of ec2-user (there are no other users on the instance). If I run gem install mygem.gem in an interactive session then that works fine. So, my question really, is what should I do to make this work for cfn-init? Have I correctly set up rvm as multi-user? I've confirmed that cfn-init is being run as the root user, with his restricted environment. How should I source the /etc/profile.d/rvm.sh into root's sessions? {1} My semi-automated rvm installation steps (run in interactive session as ec2-user): sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer ) sudo gpasswd -a ec2-user rvm # iconv-devel is baked into centos' glibc sudo yum install -y autoconf automake bison bzip2 gcc-c++ git libffi-devel libtool libxml2-devel libxslt-devel libyaml-devel make openssl-devel patch readline readline-devel zlib zlib-devel source /etc/profile.d/rvm.sh rvm list known # in a new session: rvm install ruby-1.9.3-p125 rvm use 1.9.3 --default gem update --system # gems required by public_web-awareness gem install aws-sdk bundler cocaine sinatra echo -e "gem: --no-ri --no-rdoc\n" > /home/ec2-user/.gemrc # delete unnecessary documentation files rm -rf `gem env gemdir`/doc sudo -s sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/skel/.gemrc sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/gemrc # ctrl + d out of the sudo session Some environment information: [ec2-user@ip ~]$ echo $PATH /usr/local/rvm/gems/ruby-1.9.3-p125/bin:/usr/local/rvm/gems/ruby-1.9.3-p125@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p125/bin:/usr/local/rvm/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/aws/bin:/home/ec2-user/bin [ec2-user@ip ~]$ echo $GEM_HOME /usr/local/rvm/gems/ruby-1.9.3-p125 [ec2-user@ip ~]$ echo $GEM_PATH /usr/local/rvm/gems/ruby-1.9.3-p125:/usr/local/rvm/gems/ruby-1.9.3-p125@global [ec2-user@ip ~]$ echo $BUNDLE_PATH [ec2-user@ip ~]$ gem list *** LOCAL GEMS *** aws-sdk (1.3.6) bundler (1.1.0) cocaine (0.2.1) httparty (0.8.1) json (1.6.5) multi_json (1.1.0) multi_xml (0.4.1) nokogiri (1.5.1, 1.5.0) rack (1.4.1) rack-protection (1.2.0) rake (0.9.2) sinatra (1.3.2) tilt (1.3.3) uuidtools (2.1.2) yamler (0.1.0)

    Read the article

  • Cannot get official CentOS 5.4 BIND package to start

    - by Brian Cline
    Yesterday I installed CentOS 5.4 on one of my servers, and it appears that the official BIND/named package has trouble starting for reasons I cannot deduce. Here is what happens: [root@hal init.d]# service named start Starting named: Error in named configuration: /etc/named.conf:57: open: named.root.hints: permission denied [FAILED] The line in question, with the directory option for context: // further up in the file: directory "/var/named"; // line 57: include "named.root.hints"; Like you, my first reaction was to check permissions on /var/named/named.root.hints, /var/named, and /var to make sure the named user would be able to read it. Here are the permissions at each level: drwxr-xr-x 19 root root 4096 Nov 3 02:05 var drwxr-x--- 5 root named 4096 Nov 3 02:36 named -rw-r--r-- 1 named named 524 Mar 29 2006 named.root.hints Everything appears to be fine permission-wise. The same error occurs if the /var/named directory is writable by the named user. I've even temporarily allowed the named user to log in via bash, su'ed from root to named, and checked that I was, in fact, able to cat /var/named/named.root.hints successfully. (Yes, don't worry: I changed the shell back to nologin). My last endeavor showed that BIND is able to run under the named user account and start up just fine, if done so manually: [root@hal ~]# named -u named -g 03-Nov-2009 16:31:02.021 starting BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5 -u named -g 03-Nov-2009 16:31:02.021 adjusted limit on open files from 1024 to 1048576 03-Nov-2009 16:31:02.021 found 2 CPUs, using 2 worker threads 03-Nov-2009 16:31:02.021 using up to 4096 sockets 03-Nov-2009 16:31:02.028 loading configuration from '/etc/named.conf' 03-Nov-2009 16:31:02.030 using default UDP/IPv4 port range: [1024, 65535] 03-Nov-2009 16:31:02.031 using default UDP/IPv6 port range: [1024, 65535] 03-Nov-2009 16:31:02.034 listening on IPv4 interface lo, 127.0.0.1#53 03-Nov-2009 16:31:02.034 listening on IPv4 interface eth0, 10.0.0.5#53 03-Nov-2009 16:31:02.034 listening on IPv4 interface eth1, ww.xx.yy.zz#53 03-Nov-2009 16:31:02.040 command channel listening on 127.0.0.1#953 03-Nov-2009 16:31:02.040 command channel listening on ::1#953 03-Nov-2009 16:31:02.040 ignoring config file logging statement due to -g option 03-Nov-2009 16:31:02.041 zone 0.in-addr.arpa/IN/localhost_resolver: loaded serial 42 03-Nov-2009 16:31:02.042 zone 0.0.127.in-addr.arpa/IN/localhost_resolver: loaded serial 1997022700 03-Nov-2009 16:31:02.042 zone 255.in-addr.arpa/IN/localhost_resolver: loaded serial 42 03-Nov-2009 16:31:02.042 zone 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN/localhost_resolver: loaded serial 1997022700 03-Nov-2009 16:31:02.043 zone localdomain/IN/localhost_resolver: loaded serial 42 03-Nov-2009 16:31:02.043 zone localhost/IN/localhost_resolver: loaded serial 42 03-Nov-2009 16:31:02.043 zone x.y.z.in-addr.arpa/IN/internal: loaded serial 1 03-Nov-2009 16:31:02.044 zone x.y.z/IN/internal: loaded serial 2 03-Nov-2009 16:31:02.045 running What type and size of firearm should I use to resolve this? I'd prefer something with automatic ammunition, and, at worst, it should be able to fit on my shoulder. Of course I am open to suggestions.

    Read the article

  • Unable to find valid certification path to requested target while CAS authentication

    - by Dmitriy Sukharev
    I'm trying to configure CAS authentication. It requires both CAS and client application to use HTTPS protocol. Unfortunately we should use self-signed certificate (with CN that doesn't have anything in common with our server). Also the server is behind firewall and we have only two ports (ssh and https) visible. As far as there're several application that should be visible externally, we use Apache for ajp reverse proxying requests to these applications. Secure connections are managed by Apache, and all Tomcat are not configured to work with SSL. But I obtained exception while authentication, therefore desided to set keystore in CATALINA_OPTS: export CATALINA_OPTS="-Djavax.net.ssl.keyStore=/path/to/tomcat/ssl/cert.pfx -Djavax.net.ssl.keyStoreType=PKCS12 -Djavax.net.ssl.keyStorePassword=password -Djavax.net.ssl.keyAlias=alias -Djavax.net.debug=ssl" cert.pfx was obtained from certificate and key that are used by Apache HTTP Server: $ openssl pkcs12 -export -out /path/to/tomcat/ssl/cert.pfx -inkey /path/to/apache2/ssl/server-key.pem -in /path/to/apache2/ssl/server-cert.pem When I try to authenticate a user I obtain the following exception: Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174) ~[na:1.6.0_32] at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238) ~[na:1.6.0_32] at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:318) ~[na:1.6.0_32] Meanwhile I can see in catalina.out that Tomcat see certificate in cert.pfx and it's the same as the one that is used while authentication: 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Constructing validation url: https://external-ip/cas/proxyValidate?pgtUrl=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_proxyreceptor&ticket=ST-17-PN26WtdsZqNmpUBS59RC-cas&service=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_check 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. keyStore is : /path/to/tomcat/ssl/cert.pfx keyStore type is : PKCS12 keyStore provider is : init keystore init keymanager of type SunX509 *** found key for : 1 chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** trustStore is: /jdk-home-folder/jre/lib/security/cacerts Here is a lot of trusted CAs. Here is nothing related to our certicate or our (not trusted) CA. ... 09:11:39.731 [http-bio-8080-exec-4] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. Allow unsafe renegotiation: false Allow legacy hello messages: true Is initial handshake: true Is secure renegotiation: false %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 63, 239, 180, 32, 103, 140, 83, 7, 109, 149, 177, 80, 223, 79, 243, 244, 60, 191, 124, 139, 108, 5, 122, 238, 146, 1, 54, 218 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA, TLS_EMPTY_RENEGOTIATION_INFO_SCSV] Compression Methods: { 0 } *** http-bio-8080-exec-4, WRITE: TLSv1 Handshake, length = 75 http-bio-8080-exec-4, WRITE: SSLv2 client hello message, length = 101 http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 81 *** ServerHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 145, 237, 232, 63, 240, 104, 234, 201, 148, 235, 12, 222, 60, 75, 174, 0, 103, 38, 196, 181, 27, 226, 243, 61, 34, 7, 107, 72 } Session ID: {79, 202, 117, 79, 130, 216, 168, 38, 68, 29, 182, 82, 16, 25, 251, 66, 93, 108, 49, 133, 92, 108, 198, 23, 120, 120, 135, 151, 15, 13, 199, 87} Cipher Suite: SSL_RSA_WITH_RC4_128_SHA Compression Method: 0 Extension renegotiation_info, renegotiated_connection: <empty> *** %% Created: [Session-2, SSL_RSA_WITH_RC4_128_SHA] ** SSL_RSA_WITH_RC4_128_SHA http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 609 *** Certificate chain chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** http-bio-8080-exec-4, SEND TLSv1 ALERT: fatal, description = certificate_unknown http-bio-8080-exec-4, WRITE: TLSv1 Alert, length = 2 http-bio-8080-exec-4, called closeSocket() http-bio-8080-exec-4, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target I tried to convert our pem certificate to der format and imported it to trustedKeyStore (cacerts) (without private key), but it didn't change anything. But I'm not confident that I did it rigth. Also I must inform you that I don't know passphrase for our servier-key.pem file, and probably it differs from password for keystore created by me. OS: CentOS 6.2 Architecture: x64 Tomcat version: 7 Apache HTTP Server version: 2.4 Is there any way to make Tomcat accepts our certificate?

    Read the article

  • Installing rtorrent on my ubuntu server

    - by Shishant
    Hello, I am try to install rtorrent on my ubuntu server. I ran these commands and they worked fine. ./autogen.sh ./configure --with-xmlrpc-c make and then when i tried to use make install i guess it didnt get install because no .rtorrent.rc' was created in home directory and running rtorrent returned this error rtorrent: error while loading shared libraries: libtorrent.so.11: cannot open shared object file: No such file or directory below is the log of my make install. root@ubuntu:~/rtorrent-0.8.6# make install Making install in doc make[1]: Entering directory `/root/rtorrent-0.8.6/doc' make[2]: Entering directory `/root/rtorrent-0.8.6/doc' make[2]: Nothing to be done for `install-exec-am'. test -z "/usr/local/share/man/man1" || /bin/mkdir -p "/usr/local/share/man/man1" /usr/bin/install -c -m 644 './rtorrent.1' '/usr/local/share/man/man1/rtorrent.1 ' make[2]: Leaving directory `/root/rtorrent-0.8.6/doc' make[1]: Leaving directory `/root/rtorrent-0.8.6/doc' Making install in src make[1]: Entering directory `/root/rtorrent-0.8.6/src' Making install in core make[2]: Entering directory `/root/rtorrent-0.8.6/src/core' make[3]: Entering directory `/root/rtorrent-0.8.6/src/core' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/core' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/core' Making install in display make[2]: Entering directory `/root/rtorrent-0.8.6/src/display' make[3]: Entering directory `/root/rtorrent-0.8.6/src/display' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/display' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/display' Making install in input make[2]: Entering directory `/root/rtorrent-0.8.6/src/input' make[3]: Entering directory `/root/rtorrent-0.8.6/src/input' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/input' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/input' Making install in rpc make[2]: Entering directory `/root/rtorrent-0.8.6/src/rpc' make[3]: Entering directory `/root/rtorrent-0.8.6/src/rpc' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/rpc' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/rpc' Making install in ui make[2]: Entering directory `/root/rtorrent-0.8.6/src/ui' make[3]: Entering directory `/root/rtorrent-0.8.6/src/ui' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/ui' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/ui' Making install in utils make[2]: Entering directory `/root/rtorrent-0.8.6/src/utils' make[3]: Entering directory `/root/rtorrent-0.8.6/src/utils' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src/utils' make[2]: Leaving directory `/root/rtorrent-0.8.6/src/utils' make[2]: Entering directory `/root/rtorrent-0.8.6/src' make[3]: Entering directory `/root/rtorrent-0.8.6/src' test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin" /bin/bash ../libtool --mode=install /usr/bin/install -c 'rtorrent' '/usr/loc al/bin/rtorrent' libtool: install: /usr/bin/install -c rtorrent /usr/local/bin/rtorrent make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/root/rtorrent-0.8.6/src' make[2]: Leaving directory `/root/rtorrent-0.8.6/src' make[1]: Leaving directory `/root/rtorrent-0.8.6/src' make[1]: Entering directory `/root/rtorrent-0.8.6' make[2]: Entering directory `/root/rtorrent-0.8.6' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/root/rtorrent-0.8.6' make[1]: Leaving directory `/root/rtorrent-0.8.6' Thank You.

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210  | Next Page >