Search Results

Search found 21131 results on 846 pages for 'client relations'.

Page 204/846 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • Resolving “ssl handshake failure” error in PostgresQL

    - by Mitch
    I would like to connect to my Postgres 8.3 database using SSL from my XP client using OpenSSL. This works fine without SSL. When I try it with SSL (no client certificate), I get the error: error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure I have followed the instructions in the Postgres manual for SSL including creating a self-signed certificate. In my pg_hba.conf there is a line: host dbname loginname 123.45.67.89/32 md5 The version of OpenSSL on the server is 0.9.8g and on the client is 0.9.8j. I'd appreciate any suggestions for tracking down the problem. Edit: The uncommented lines from postgresql.conf are: data_directory = '/var/ebs0/postgres/main' hba_file = '/etc/postgresql/8.3/main/pg_hba.conf' ident_file = '/etc/postgresql/8.3/main/pg_ident.conf' external_pid_file = '/var/run/postgresql/8.3-main.pid' listen_addresses = '*' port = 5432 max_connections = 100 unix_socket_directory = '/var/run/postgresql' ssl = true shared_buffers = 24MB

    Read the article

  • Cisco 877 as a VPN server?

    - by Massimo
    I have a Cisco 877 router which connects my network to the Internet using an ADSL line, a single public IP address and NAT; the IOS version is 15. Everything is working ok, but I'd like to configure this router to be a VPN server, to be able to connect to the network from the outside. I've tried looking for documentation, but everything I can find is related to having the 877 act as a VPN client, or to site-to-site VPNs; I can't find anything about letting single remote computers access the internal network, which is something I can do quite easily using Windows' RRAS or ISA Server. Can the Cisco 877 act as a VPN server for remote client computers? (Looks like it should, but just to be sure...) Which type of VPNs does it support? Do they require some special software on the client machines, or can they be used by standard out-of-the-box Windows computers? And, finally: how to set up this?

    Read the article

  • UDP multicast streaming of media content over WIFI

    - by sajad
    I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

    Read the article

  • How to make Exchange 2010 use In-Reply-To and References headers as well as Thread-Index?

    - by Paul Wagland
    The problem that I have is simple. We have recently upgraded from Exchange 2003 to Exchange 2010. Everything went fine, and there are very few complaints. In Exchange 2003, some of our OWA users liked the Threading view, these users love the conversations view, especially with the cross-mailbox threading. The problem is that some of these users are now complaining that old e-mails that they got from systems like bugzilla were migrated across correctly threaded, but the new e-mails are not being correctly threaded. If I look at the mail source using an IMAP client then I can see that all of the mails that are turning up as being threaded have the (Microsoft specific) Thread-Index header, and the mails that are not getting grouped do not have this header. The question is, how can I make the webmail client respect the normal threading? That is, is there a way to Make the OWA client use the standard In-Reply-To and References headers, or Make Exchange generate the Thread-Index headers for Outlook and OWA to use?

    Read the article

  • pslist causes security audit log failure on non-administrative user account

    - by Woot4Moo
    The user has RX privs. This event consistently arises in the security logs. How can this be resolved? Or what is the underlying issue here? Some additional information the user has local login disabled and log on as a service enabled. Failure Audit Category: Object Access Event ID 560 Object Server: Security Object Type: File Object Name: Pg_control Image File Name: xx/xx/xx/xx postgres.exe Primary User name: my_User Object Open: Object Server: Security Object Type: Key Object Name: \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Performance Handle ID: - Operation ID: {0,26727190} Process ID: 2492 Image File Name: C:\Program Files\tomcat\webapps\myApp\bin\win32\pslist.exe Primary User Name: my_user Primary Domain: KFHFTZ03 Primary Logon ID: (0x0,0x178D9) Client User Name: - Client Domain: - Client Logon ID: - Accesses: READ_CONTROL Query key value Set key value Create sub-key Enumerate sub-keys Notify about changes to keys Privileges: - Restricted Sid Count: 0 Access Mask: 0x2001

    Read the article

  • Making Google Talk messages appear on all logged in clients

    - by Ryan Hayes
    We're using Google Talk as our unofficial-official chat client around the office at work. One thing that poses a big problem almost every day is the fact that Google Talk only sends a message to the clients that you last used. Even though you may be logged into GTalk on 3 different machines, if you start talking on one machine, that becomes your "active" machine, and if you go to another machine, you will still only get messages on the last active machine. Is there a way that you can force Google Talk to send messages to ALL logged in clients, regardless of which client you are actively using? That way, you don't miss any messages during the time between when you get up from the active machine and then make the new client "active".

    Read the article

  • Can I delete libc-bin?

    - by Balazs Szikszay
    Question is simple, I need to know because I cant upgrade/install anything, because it always says I have to uninstall/delete it to continue. It also says dont do it, if I dont know what I am doing. EDIT: szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not installed Depends: libqtgui4:i386 but it is not installed Depends: libqt4-dbus:i386 but it is not installed Depends: libqt4-network:i386 but it is not installed Depends: libqt4-opengl:i386 but it is not installed Depends: libqt4-qt3support:i386 but it is not installed Depends: libqt4-script:i386 but it is not installed Depends: libqt4-scripttools:i386 but it is not installed Depends: libqt4-sql:i386 but it is not installed Depends: libqt4-svg:i386 but it is not installed Depends: libqt4-test:i386 but it is not installed Depends: libqt4-xml:i386 but it is not installed Depends: libqt4-xmlpatterns:i386 but it is not installed Depends: libcups2:i386 but it is not installed Depends: libcupsimage2:i386 but it is not installed Depends: libcurl3:i386 but it is not installed Depends: libnss3:i386 but it is not installed Depends: libnspr4:i386 but it is not installed Depends: libssl1.0.0:i386 but it is not installed Recommends: libgl1-mesa-glx:i386 but it is not installed Recommends: libgl1-mesa-dri:i386 but it is not installed lib32ffi6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32gcc1 : Depends: libc6-i386 (= 2.5) but it is not installed lib32nss-mdns : Depends: libc6-i386 (= 2.4) but it is not installed lib32stdc++6 : Depends: libc6-i386 (= 2.4) but it is not installed lib32z1 : Depends: libc6-i386 (= 2.4) but it is not installed libacl1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libattr1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libaudio2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libavahi-client3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libdbus-1-3:i386 (= 1.1.1) but it is not installed libavahi-common3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libcomerr2:i386 : Depends: libc6:i386 (= 2.12) but it is not installed libdb5.1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libdrm-intel1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm-nouveau1a:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libdrm-radeon1:i386 : Depends: libc6:i386 (= 2.3.4) but it is not installed libdrm2:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libffi6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libfontconfig1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libexpat1:i386 (= 1.95.8) but it is not installed Depends: libfreetype6:i386 (= 2.2.1) but it is not installed libgcc1:i386 : Depends: libc6:i386 (= 2.2.4) but it is not installed libgcrypt11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libgdbm3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libglib2.0-0:i386 : Depends: libc6:i386 (= 2.9) but it is not installed libgpg-error0:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libice6:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libidn11:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libjpeg62:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libkeyutils1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed liblcms1:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libllvm2.9:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libmng1:i386 : Depends: libc6:i386 (= 2.11) but it is not installed libpciaccess0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libpcre3:i386 : Depends: libc6:i386 (= 2.4) but it is not installed librtmp0:i386 : Depends: libc6:i386 (= 2.7) but it is not installed Depends: libgnutls26:i386 (= 2.9.11-0) but it is not installed libsasl2-2:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsasl2-modules:i386 : Depends: libc6:i386 (= 2.4) but it is not installed Depends: libssl1.0.0:i386 (= 1.0.0) but it is not installed libselinux1:i386 : Depends: libc6:i386 (= 2.8) but it is not installed libsm6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libsqlite3-0:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libstdc++6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libuuid1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libx11-6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxau6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxcb1:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxdamage1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxdmcp6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxext6:i386 : Depends: libc6:i386 (= 2.4) but it is not installed libxfixes3:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxrender1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxss1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed libxt6:i386 : Depends: libc6:i386 (= 2.7) but it is not installed libxxf86vm1:i386 : Depends: libc6:i386 (= 2.1.3) but it is not installed zlib1g:i386 : Depends: libc6:i386 (= 2.4) but it is not installed E: Unmet dependencies. Try using -f. szikszay@szikszay-Latitude-E5530-non-vPro:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be REMOVED libc-bin The following NEW packages will be installed libc-bin:i386 libc6:i386 libc6-i386 libcups2:i386 libcupsimage2:i386 libcurl3:i386 libdbus-1-3:i386 libexpat1:i386 libfreetype6:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:i386 libglapi-mesa:i386 libgnutls26:i386 libgssapi-krb5-2:i386 libk5crypto3:i386 libkrb5-3:i386 libkrb5support0:i386 libldap-2.4-2:i386 libnspr4:i386 libnss3:i386 libpng12-0:i386 libqt4-dbus:i386 libqt4-declarative:i386 libqt4-designer:i386 libqt4-network:i386 libqt4-opengl:i386 libqt4-qt3support:i386 libqt4-script:i386 libqt4-scripttools:i386 libqt4-sql:i386 libqt4-svg:i386 libqt4-test:i386 libqt4-xml:i386 libqt4-xmlpatterns:i386 libqtcore4:i386 libqtgui4:i386 libssl1.0.0:i386 libtasn1-3:i386 libtiff4:i386 libxi6:i386 The following packages have been kept back: ginn libgrip0 linux-headers-generic linux-image-generic unity unity-common xserver-xorg-input-evdev xserver-xorg-input-synaptics The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner apparmor appmenu-qt apport apport-gtk apt apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common at-spi2-core bamfdaemon banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common brltty bzip2 ca-certificates-java checkbox checkbox-gtk colord command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc dbus dbus-x11 deja-dup desktop-file-utils dnsutils dpkg ecryptfs-utils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support firefox-locale-en firefox-locale-hu gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-keyring gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gnupg gpgv grub-common grub-pc grub-pc-bin grub2-common gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter gzip hpijs hplip hplip-cups hplip-data icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx ifupdown im-switch indicator-datetime indicator-session indicator-sound initramfs-tools initramfs-tools-bin initscripts insserv isc-dhcp-client isc-dhcp-common iso-codes jockey-common jockey-gtk language-pack-en language-pack-en-base language-pack-gnome-en language-pack-gnome-en-base language-pack-gnome-hu language-pack-gnome-hu-base language-pack-hu language-pack-hu-base language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libapt-pkg4.11 libarchive1 libasound2-plugins libatk-adaptor libatspi2.0-0 libbamf0 libbamf3-0 libbind9-60 libbluetooth3 libbrasero-media3-1 libbrlapi0.5 libbz2-1.0 libc-dev-bin libc6 libc6-dev libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libcolord1 libcups2 libcupscgi1 libcupsdriver1 libcupsimage2 libcupsmime1 libcupsppdc1 libcurl3-gnutls libdbus-1-3 libdbus-glib-1-2 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libecryptfs0 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libexif12 libexpat1 libfreetype6 libgail-3-0 libgail-3-common libgck-1-0 libgconf2-4 libgcr-3-1 libgdata-common libgdata13 libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libglu1-mesa libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgnutls26 libgoa-1.0-0 libgs9 libgs9-common libgssapi-krb5-2 libgtk-3-0 libgtk-3-bin libgtk-3-common libgtksourceview-3.0-0 libgtksourceview-3.0-common libgudev-1.0-0 libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libicu44 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 libjs-jquery libk5crypto3 libkrb5-3 libkrb5support0 libldap-2.4-2 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-cairo4.0-cil libmono-corlib4.0-cil libmono-csharp4.0-cil libmono-i18n-west4.0-cil libmono-i18n4.0-cil libmono-posix4.0-cil libmono-security4.0-cil libmono-sharpzip4.84-cil libmono-system-configuration4.0-cil libmono-system-core4.0-cil libmono-system-drawing4.0-cil libmono-system-security4.0-cil libmono-system-xml4.0-cil libmono-system4.0-cil libmono-zeroconf1.0-cil libmysqlclient16 libnautilus-extension1 libncurses5 libncursesw5 libnm-glib-vpn1 libnm-glib4 libnm-gtk-common libnm-gtk0 libnm-util2 libnotify0.4-cil libnspr4 libnss3 libnss3-1d libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libpam-modules libpam-modules-bin libpam-runtime libpam0g libperl5.12 libpng12-0 libpoppler-glib6 libpoppler13 libproxy0 libpulse-mainloop-glib0 libpulse0 libpurple-bin libpurple0 libpython2.7 libqt4-dbus libqt4-declarative libqt4-network libqt4-opengl libqt4-script libqt4-sql libqt4-sql-mysql libqt4-svg libqt4-xml libqt4-xmlpatterns libqtcore4 libqtgui4 libreoffice-base-core libreoffice-calc libreoffice-common libreoffice-core libreoffice-draw libreoffice-emailmerge libreoffice-gnome libreoffice-gtk libreoffice-help-en-gb libreoffice-help-en-us libreoffice-help-hu libreoffice-impress libreoffice-l10n-common libreoffice-l10n-en-gb libreoffice-l10n-en-za libreoffice-l10n-hu libreoffice-math libreoffice-style-human libreoffice-writer libsane-hpaio libsmbclient libsnmp-base libsnmp15 libssl1.0.0 libsyncdaemon-1.0-1 libt1-5 libtasn1-3 libtiff4 libtinfo5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libudev0 libunity-core-4.0-4 libunity6 libusbmuxd1 libv4l-0 libvorbis0a libvorbisenc2 libvorbisfile3 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxi6 libxml2 libxslt1.1 lightdm linux-firmware linux-libc-dev mawk metacity metacity-common mobile-broadband-provider-info modemmanager mono-4.0-gac mono-gac mono-runtime mousetweaks multiarch-support mysql-common nautilus nautilus-data nautilus-sendto-empathy ncurses-base ncurses-bin network-manager network-manager-gnome nux-tools onboard openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl perl perl-base perl-modules poppler-utils pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-crypto python-cups python-cupshelpers python-egenix-mxdatetime python-egenix-mxtools python-gobject python-gobject-cairo python-httplib2 python-keyring python-launchpadlib python-libproxy python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol python-uno python2.7 python2.7-minimal qdbus samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-center software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev sysv-rc sysvinit-utils telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support thunderbird-locale-en thunderbird-locale-en-gb thunderbird-locale-en-us thunderbird-locale-hu tomboy totem totem-common totem-mozilla totem-plugins transmission-common transmission-gtk ttf-opensymbol tzdata tzdata-java ubuntu-desktop ubuntu-docs ubuntu-minimal ubuntu-sso-client ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch udev unity-lens-applications unity-services uno-libs3 update-manager update-manager-core update-notifier update-notifier-common upstart ure usbmuxd vim-common vim-tiny vinagre vino whois x11-common xdiagnose xorg xserver-common xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xserver-xorg-video-qxl xul-ext-ubufox WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! libc-bin 498 upgraded, 40 newly installed, 1 to remove and 8 not upgraded. 69 not fully installed or removed. Need to get 439 MB of archives. After this operation, 135 MB of additional disk space will be used. You are about to do something potentially harmful To continue type in the phrase ‘Yes, do as I say!’ ?] I tried to upgrade but it gives me an error, when i try to upgrade-f it says i should delete libc-bin. Thanks for the answers btw. EDIT2: it also says this: The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f

    Read the article

  • What's required to configure Ubuntu to use a specific DNS server?

    - by ks78
    I've setup two Amazon EC2 instances, both running Ubuntu Server. One is configured as a DNS server running bind9, which will be used to allow EC2 instances to communicate with each other based on hostname rather than IP, since their private IPs may change. I think I have the DNS server setup correctly. I want to use the second EC2 instance to test the DNS server. Using Webmin, I've added the DNS server's private IP to the client's DNS Servers list and added the domain to the Search Domains list. I did have to edit /etc/dhcp3/dhclint.conf to make my changes stick. After reboot, I expected I'd be able to ping or nslookup the DNS server from the test client, but it can't seem to find the server. Is there something I'm missing? What's required to configure an Ubuntu client to use a DNS server? I just want to make sure I'm not missing something before I assume the server's the problem.

    Read the article

  • Apache 2.4.3 php-fpm mod_fast_cgi and mod_cache

    - by Anjia
    Did anybody successfully configured mod_cache in apache 2.4 with php-fpm and fastcgi? my cgi config: <IfModule mod_fastcgi.c> Alias /php5.fastcgi /var/www/fastcgi/php5.fastcgi AddHandler php-script .php FastCGIExternalServer /var/www/fastcgi/php5.fastcgi -socket /mnt/tmp/fast/php-fpm.sock -idle-timeout 1600 -pass-header Authorization Action php-script /php5.fastcgi virtual My php-fpm config is standard and I am loading mod_cache and mod_disk_cache in Apache. However the Apache does not seems to cache any content. The debug log file: Fri Sep 07 23:22:59.691333 2012] [cache:debug] [pid 35623:tid 123613201929984] mod_cache.c(161): [client 10.0.0.22:21938] AH00750: Adding CACHE_SAVE filter for /index.html [Fri Sep 07 23:22:59.691345 2012] [cache:debug] [pid 35623:tid 123613201929984] mod_cache.c(171): [client 10.0.0.22:21938] AH00751: Adding CACHE_REMOVE_URL filter for /index.html [Fri Sep 07 23:23:01.326598 2012] [cache:debug] [pid 35623:tid 123613185144576] cache_storage.c(626): [client 10.0.0.110:5414] AH00698: cache: Key for entity /index.html?(null) is `http://10.0.1.16:8080/index.html?`

    Read the article

  • Windows Server Certified as Secure Global Desktop Clients with EBS 12

    - by Steven Chan (Oracle Development)
    Oracle Secure Global Desktop provides secure access to centralized applications—Microsoft Windows, UNIX, mainframe, and midrange—from a wide variety of popular client devices, including Windows PCs, Oracle Solaris workstations, Linux PCs, and thin clients. Secure Global Desktop is certified for use with Microsoft Windows Server 2003 and 2008 virtualized environments acting as desktop clients connecting to Oracle E-Business Suite Release 12 environments.  32-bit and 64-bit versions of Microsoft Windows Server are certified. These combinations may also be used in conjunction with Oracle VM, if required. How does this work? For example, a Secure Desktop Client can connect to a Secure Global Desktop environment.  That environment can be running Microsoft Server 2008.  That environment can be used, in turn, as a "desktop client" to access Oracle E-Business Suite Release 12.1.3. Requirements EBS 12.1.3 + Windows Server 2008 R2 (64-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit and 64-bit) or Internet Explorer 9 (32-bit and 64-bit) JRE Plug-in 1.6.0_32 (32-bit and 64-bit) or later 1.6 releases EBS 12.1.3 + Windows Server 2008 (32-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit) or Internet Explorer 9 (32-bit) JRE Plug-in 1.6.0_32 (32-bit) or later 1.6 releases EBS 12.1.3 + Windows Server 2003 R2 (64-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit and 64-bit) JRE Plug-in 1.6.0_32 (32-bit and 64-bit) or later 1.6 releases EBS 12.1.3 + Windows Server 2003 R2 (32-bit) Secure Global Desktop version 4.6 or higher Internet Explorer 8 (32-bit) JRE Plug-in 1.6.0_32 (32-bit) or later 1.6 releases References Oracle Secure Global Desktop with E-Business Suite Release 12.1.3 (Note 1491211.1) Related Articles Oracle VM Templates Available for E-Business Suite 12.1.3 Support Policies for Virtualization Technologies and Oracle E-Business Suite Webcast Replay Available: Virtualization and Cloud Deployments of Oracle E-Business Suite

    Read the article

  • The remote host closed the connection. The error code is 0x80070057

    - by Jalpesh P. Vadgama
    While creating a PDF or any file with asp.net pages I was getting following error. Exception Type:System.Web.HttpException The remote host closed the connection. The error code is 0x80072746. at System.Web.Hosting.ISAPIWorkerRequestInProcForIIS6.FlushCore(Byte[] status, Byte[] header, Int32 keepConnected, Int32 totalBodySize, Int32 numBodyFragments, IntPtr[] bodyFragments, Int32[] bodyFragmentLengths, Int32 doneWithSession, Int32 finalStatus, Boolean& async) at System.Web.Hosting.ISAPIWorkerRequest.FlushCachedResponse(Boolean isFinal) at System.Web.Hosting.ISAPIWorkerRequest.FlushResponse(Boolean finalFlush) at System.Web.HttpResponse.Flush(Boolean finalFlush) at System.Web.HttpResponse.Flush() at System.Web.UI.HttpResponseWrapper.System.Web.UI.IHttpResponse.Flush() at System.Web.UI.PageRequestManager.RenderFormCallback(HtmlTextWriter writer, Control containerControl) at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) at System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) at System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) at System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) at System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) at System.Web.UI.HtmlFormWrapper.System.Web.UI.IHtmlForm.RenderControl(HtmlTextWriter writer) at System.Web.UI.PageRequestManager.RenderPageCallback(HtmlTextWriter writer, Control pageControl) at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) at System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) at System.Web.UI.Page.Render(HtmlTextWriter writer) at System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.Control.RenderControl(HtmlTextWriter writer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) Exception Type:System.Web.HttpException The remote host closed the connection. The error code is 0x80072746. at System.Web.Hosting.ISAPIWorkerRequestInProcForIIS6.FlushCore(Byte[] status, After searching and analyzing I have found that client was disconnected and still I am flushing the response which I am doing for creating PDF files from the stream. To fix this kind of error we can use Response.IsClientConnected property to check whether client is connected or not and then we can flush and end response from client. Here is the sample code to fix that problem. if (Response.IsClientConnected) { Response.Flush(); Response.End(); } That’s it Hope this will help you..Stay tuned for more.. Till that Happy Programming!! Technorati Tags: Exception,ASp.NET

    Read the article

  • NHibernate Conventions

    - by Ricardo Peres
    Introduction It seems that nowadays everyone loves conventions! Not the ones that you go to, but the ones that you use, that is! It just happens that NHibernate also supports conventions, and we’ll see exactly how. Conventions in NHibernate are supported in two ways: Naming of tables and columns when not explicitly indicated in the mappings; Full domain mapping. Naming of Tables and Columns Since always NHibernate has supported the concept of a naming strategy. A naming strategy in NHibernate converts class and property names to table and column names and vice-versa, when a name is not explicitly supplied. In concrete, it must be a realization of the NHibernate.Cfg.INamingStrategy interface, of which NHibernate includes two implementations: DefaultNamingStrategy: the default implementation, where each column and table are mapped to identically named properties and classes, for example, “MyEntity” will translate to “MyEntity”; ImprovedNamingStrategy: underscores (_) are used to separate Pascal-cased fragments, for example, entity “MyEntity” will be mapped to a “my_entity” table. The naming strategy can be defined at configuration level (the Configuration instance) by calling the SetNamingStrategy method: 1: cfg.SetNamingStrategy(ImprovedNamingStrategy.Instance); Both the DefaultNamingStrategy and the ImprovedNamingStrategy classes offer singleton instances in the form of Instance static fields. DefaultNamingStrategy is the one NHibernate uses, if you don’t specify one. Domain Mapping In mapping by code, we have the choice of relying on conventions to do the mapping automatically. This means a class will inspect our classes and decide how they will relate to the database objects. The class that handles conventions is NHibernate.Mapping.ByCode.ConventionModelMapper, a specialization of the base by code mapper, NHibernate.Mapping.ByCode.ModelMapper. The ModelMapper relies on an internal SimpleModelInspector to help it decide what and how to map, but the mapper lets you override its decisions.  You apply code conventions like this: 1: //pick the types that you want to map 2: IEnumerable<Type> types = Assembly.GetExecutingAssembly().GetExportedTypes(); 3:  4: //conventions based mapper 5: ConventionModelMapper mapper = new ConventionModelMapper(); 6:  7: HbmMapping mapping = mapper.CompileMappingFor(types); 8:  9: //the one and only configuration instance 10: Configuration cfg = ...; 11: cfg.AddMapping(mapping); This is a very simple example, it lacks, at least, the id generation strategy, which you can add by adding an event handler like this: 1: mapper.BeforeMapClass += (IModelInspector modelInspector, Type type, IClassAttributesMapper classCustomizer) => 2: { 3: classCustomizer.Id(x => 4: { 5: //set the hilo generator 6: x.Generator(Generators.HighLow); 7: }); 8: }; The mapper will fire events like this whenever it needs to get information about what to do. And basically this is all it takes to automatically map your domain! It will correctly configure many-to-one and one-to-many relations, choosing bags or sets depending on your collections, will get the table and column names from the naming strategy we saw earlier and will apply the usual defaults to all properties, such as laziness and fetch mode. However, there is at least one thing missing: many-to-many relations. The conventional mapper doesn’t know how to find and configure them, which is a pity, but, alas, not difficult to overcome. To start, for my projects, I have this rule: each entity exposes a public property of type ISet<T> where T is, of course, the type of the other endpoint entity. Extensible as it is, NHibernate lets me implement this very easily: 1: mapper.IsOneToMany((MemberInfo member, Boolean isLikely) => 2: { 3: Type sourceType = member.DeclaringType; 4: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 5:  6: //check if the property is of a generic collection type 7: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 8: { 9: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 10:  11: //check if the type of the generic collection property is an entity 12: if (mapper.ModelInspector.IsEntity(destinationEntityType) == true) 13: { 14: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 15: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 16:  17: if (collectionInDestinationType != null) 18: { 19: return (false); 20: } 21: } 22: } 23:  24: return (true); 25: }); 26:  27: mapper.IsManyToMany((MemberInfo member, Boolean isLikely) => 28: { 29: //a relation is many to many if it isn't one to many 30: Boolean isOneToMany = mapper.ModelInspector.IsOneToMany(member); 31: return (!isOneToMany); 32: }); 33:  34: mapper.BeforeMapManyToMany += (IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) => 35: { 36: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 37: //set the mapping table column names from each source entity name plus the _Id sufix 38: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 39: }; 40:  41: mapper.BeforeMapSet += (IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) => 42: { 43: if (modelInspector.IsManyToMany(member.LocalMember) == true) 44: { 45: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 46:  47: Type sourceType = member.LocalMember.DeclaringType; 48: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 49: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 50:  51: //set inverse on the relation of the alphabetically first entity name 52: propertyCustomizer.Inverse(sourceType.Name == names.First()); 53: //set mapping table name from the entity names in alphabetical order 54: propertyCustomizer.Table(String.Join("_", names)); 55: } 56: }; We have to understand how the conventions mapper thinks: For each collection of entities found, it will ask the mapper if it is a one-to-many; in our case, if the collection is a generic one that has an entity as its generic parameter, and the generic parameter type has a similar collection, then it is not a one-to-many; Next, the mapper will ask if the collection that it now knows is not a one-to-many is a many-to-many; Before a set is mapped, if it corresponds to a many-to-many, we set its mapping table. Now, this is tricky: because we have no way to maintain state, we sort the names of the two endpoint entities and we combine them with a “_”; for the first alphabetical entity, we set its relation to inverse – remember, on a many-to-many relation, only one endpoint must be marked as inverse; finally, we set the column name as the name of the entity with an “_Id” suffix; Before the many-to-many relation is processed, we set the column name as the name of the other endpoint entity with the “_Id” suffix, as we did for the set. And that’s it. With these rules, NHibernate will now happily find and configure many-to-many relations, as well as all the others. You can wrap this in a new conventions mapper class, so that it is more easily reusable: 1: public class ManyToManyConventionModelMapper : ConventionModelMapper 2: { 3: public ManyToManyConventionModelMapper() 4: { 5: base.IsOneToMany((MemberInfo member, Boolean isLikely) => 6: { 7: return (this.IsOneToMany(member, isLikely)); 8: }); 9:  10: base.IsManyToMany((MemberInfo member, Boolean isLikely) => 11: { 12: return (this.IsManyToMany(member, isLikely)); 13: }); 14:  15: base.BeforeMapManyToMany += this.BeforeMapManyToMany; 16: base.BeforeMapSet += this.BeforeMapSet; 17: } 18:  19: protected virtual Boolean IsManyToMany(MemberInfo member, Boolean isLikely) 20: { 21: //a relation is many to many if it isn't one to many 22: Boolean isOneToMany = this.ModelInspector.IsOneToMany(member); 23: return (!isOneToMany); 24: } 25:  26: protected virtual Boolean IsOneToMany(MemberInfo member, Boolean isLikely) 27: { 28: Type sourceType = member.DeclaringType; 29: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 30:  31: //check if the property is of a generic collection type 32: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 33: { 34: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 35:  36: //check if the type of the generic collection property is an entity 37: if (this.ModelInspector.IsEntity(destinationEntityType) == true) 38: { 39: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 40: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 41:  42: if (collectionInDestinationType != null) 43: { 44: return (false); 45: } 46: } 47: } 48:  49: return (true); 50: } 51:  52: protected virtual new void BeforeMapManyToMany(IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) 53: { 54: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 55: //set the mapping table column names from each source entity name plus the _Id sufix 56: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 57: } 58:  59: protected virtual new void BeforeMapSet(IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) 60: { 61: if (modelInspector.IsManyToMany(member.LocalMember) == true) 62: { 63: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 64:  65: Type sourceType = member.LocalMember.DeclaringType; 66: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 67: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 68:  69: //set inverse on the relation of the alphabetically first entity name 70: propertyCustomizer.Inverse(sourceType.Name == names.First()); 71: //set mapping table name from the entity names in alphabetical order 72: propertyCustomizer.Table(String.Join("_", names)); 73: } 74: } 75: } Conclusion Of course, there is much more to mapping than this, I suggest you look at all the events and functions offered by the ModelMapper to see where you can hook for making it behave the way you want. If you need any help, just let me know!

    Read the article

  • How to specify file permission when putting a file using OpenSSH sftp command

    - by Adi Roiban
    I am using various SFTP clients for uploading files to an SFTP server and I have a problem with default permission used when putting files. When requesting to put a file, SFTP client like WinSCP or Filezilla will send the SSH_OPEN command without requesting any explicit file permission. On the other side, it looks like the OpenSSH sftp command on Linux (Red Hat and Ubuntu) is pending the SSH_OPEN command together with the '640' mode. How can I configure the OpenSSH command to not explictly set the file mode or how can I configure it to send a mode, other than 640? Many thanks! Update: I checked the OpenSSH sftp client source code and it looks like OpenSSH sftp will always tries to preserve file mode even if -P is not set: http://www.koders.com/c/fidD3B20680F615B33ACCB42398FAAFEE1C007DF942.aspx?s=rsa#L986 To solve this problem I used Putty SFTP client.

    Read the article

  • Unexpected "Connection timed out: proxy connect" lines in Apache error.log

    - by Gregg Lind
    I see some unexpected lines in my Apache (1.3!) error.log. What is happening here? My isp has complained in the past about proxying attempts... how do I check for them? [Sun Apr 4 16:43:32 2010] [error] [client 60.173.11.34] (110)Connection timed out: proxy connect to 61.132.221.146 port 80 failed [Sun Apr 4 16:44:11 2010] [error] [client 60.173.11.34] (110)Connection timed out: proxy connect to 61.132.221.146 port 80 failed [Sun Apr 4 16:45:34 2010] [error] [client 79.2.28.220] (110)Connection timed out: proxy connect to 203.212.171.170 port 80 failed (If more information would be useful, please ask me to clarify!)

    Read the article

  • OpenSSH 5.9p1 on Ubuntu 11.10

    - by Michal Burak
    I want to build a deb package with the latest version of openssh from source. Then I want to install it on my machine. I am running: Linux Ubuntu-1110-oneiric-64-minimal 3.0.0-12-server #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux To achieve my goal I do: wget ftp://ftp.openbsd.com/pub/OpenBSD/OpenSSH/portable/openssh-5.9p1.tar.gz wget ftp://ftp.openbsd.com/pub/OpenBSD/OpenSSH/portable/openssh-5.9p1.tar.gz.asc gpg openssh-5.9p1.tar.gz.asc apt-get build-dep openssh-server openssh-client apt-get source openssh-server cd openssh-5.8p1/ uupdate -v 5.9p1 /root/packages/openssh/openssh-5.9p1.tar.gz cd ../openssh-5.9p1 dpkg-buildpackage -us -uc -nc But I get an error: make[1]: Entering directory `/root/packages/openssh/openssh-5.9p1' rm -f debian/tmp/etc/ssh/sshd_config dh_install -Nopenssh-client-udeb -Nopenssh-server-udeb --fail-missing cp: cannot stat `debian/tmp/usr/bin/ssh-vulnkey': No such file or directory dh_install: cp -a debian/tmp/usr/bin/ssh-vulnkey debian/openssh-client//usr/bin/ returned exit code 1 make[1]: *** [override_dh_install] Error 2 make[1]: Leaving directory `/root/packages/openssh/openssh-5.9p1' make: *** [binary] Error 2 dpkg-buildpackage: error: debian/rules binary gave error exit status 2 Any ideas what do I do to make this work?

    Read the article

  • Make it simple. Make it work.

    - by Sean Feldman
    In 2010 I had an experience to work for a business that had lots of challenges. One of those challenges was luck of technical architecture and business value recognition which translated in spending enormous amount of manpower and money on creating C++ solutions for desktop client w/o using .NET to minimize “footprint” (2#) of the client application in deployment environments. This was an awkward experience, considering that C++ custom code was created from scratch to make clients talk to .NET backend while simple having .NET as a dependency would cut time to market by at least 50% (and I’m downplaying the estimate). Regardless, recent Microsoft announcement about .NET vNext has reminded me that experience and how short sighted architecture at that company was. Investment made into making C++ client that cannot be maintained internally by team due to it’s specialization in .NET have created a situation where code to maintain will be more brutal over the time and  number of developers understanding it will be going and shrinking. Not only that. The ability to go cross-platform (#3) and performance achievement gained with native compilation (#1) would be an immediate pay back. Why am I saying all this? To make a simple point to myself and remind again – when working on a product that needs to get to the market, make it simple, make it work, and then see how technology is changing and how you can adopt. Simplicity will not let you down. But a complex solution will always do.

    Read the article

  • IIS requesting certificates even though set to ignore

    - by lupefiasco
    I have a web site in IIS 6 with directory security set to Require secure channel (SSL) and Require 128-bit encryption. Also, the Client certificates setting is set to "Ignore client certificates". When I hit https://servername/resource in Internet Explorer and Chrome , I am prompted for a certificate. I can cancel the prompt, and the resource will load, but I don't want to see this prompt at all. I looked at the virtual directories and resources within the web site, and they all have the ignore client certificates setting on. Could there be another setting, perhaps in the metbase, that is overriding the web site's directory security settings?

    Read the article

  • Distributing Files using a Group Policy on Windows Server 2003

    - by tonedeath
    A piece of software that we use at our office has recently moved to a new licensing system. This means that from now on a new set of license key files will need to be distributed to each of our 25 client installations every year. All of the clients run XP and are part of an AD domain controlled by a Windows 2003 DC. I'm already using group policies to deploy software updates. I gather that this is possible with Group Policy Preferences in Server 2008. I'm just looking for a good method using Server 2003. The same set of files need copying to each client. I also have them hosted on a network share accessible by each client. I'm more of a *nix person, so I'm not particularly up on scripting in a Windows environment.

    Read the article

  • How to restrict Apache Location directive to cetain sub-domain?

    - by ohho
    On our server www.example.com, we use the <Location> directive to proxy traffic to a back-end server: <Location /app1> ProxyPass http://192.168.1.20 </Location> Then we added a sub-domain uat.example.com which points to the same IP address of www.example.com. We want to use it as a proxy for client to test an app being developed. Hopefully, the client can access via: http:/uat.example.com/app2_uat Now if we add a Location: <Location /app2_uat> ProxyPass http://192.168.1.30 </Location> The client can access both: http:/www.example.com/app2_uat http:/uat.example.com/app2_uat How can I restrict Location such that only: http:/uat.example.com/app2_uat is accessible? (i.e. http:/www.example.com/app2_uat should not be accessible.)

    Read the article

  • indirect rendering issue on 12.04, using ati driver

    - by lurscher
    I have ubuntu 12.04 64-bit system, when i run glxinfo i see some strange error about indirect rendering and failed to load some lib32/dri/swrast_dri libraries. Any idea what is going on? please let me know if i can enhance the relevant information provided in this question $ LIBGL_DEBUG=verbose glxinfo name of display: :0 libGL: screen 0 does not appear to be DRI2 capable libGL: OpenDriver: trying /usr/lib32/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib32/dri/swrast_dri.so libGL error: dlopen /usr/lib32/dri/swrast_dri.so failed (/usr/lib32/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL: OpenDriver: trying /usr/lib/dri/tls/swrast_dri.so libGL: OpenDriver: trying /usr/lib/dri/swrast_dri.so libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: reverting to indirect rendering display: :0 screen: 0 direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose) server glx vendor string: ATI server glx version string: 1.4 server glx extensions: GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group client glx vendor string: Mesa Project and SGI client glx version string: 1.4 client glx extensions: GLX_ARB_create_context, GLX_ARB_create_context_profile, GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_framebuffer_sRGB, GLX_EXT_create_context_es2_profile, GLX_MESA_copy_sub_buffer, GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap, GLX_INTEL_swap_event GLX version: 1.4 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_multithread_makecurrent, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: AMD Radeon HD 6800 Series OpenGL version string: 1.4 (2.1 (4.2.11762 Compatibility Profile Context)) OpenGL extensions: GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, GL_ARB_framebuffer_object, GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_blit, GL_EXT_framebuffer_multisample, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_ATI_draw_buffers, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_NV_texture_rectangle, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

    Read the article

  • PHP crashing on occasion - APC error?

    - by papanel
    Any thoughts on this? We've had this happen twice recently. Basically, every page throws a fatal error, fixed by an apache restart. Here's what's in the log, repeated over and over. [Tue Apr 13 15:18:12 2010] [error] [client 10.0.0.2] PHP Fatal error: Internal Zend error - Missing class information for in /www/sites/ep/vogoo/items.php on line 31 [Tue Apr 13 15:18:12 2010] [error] [client 10.0.0.2] PHP Fatal error: Internal Zend error - Missing class information for in /www/sites/ep/vogoo/items.php on line 31 [Tue Apr 13 15:18:13 2010] [error] [client 10.0.0.2] PHP Fatal error: Internal Zend error - Missing class information for in /www/sites/ep/vogoo/items.php on line 31 Looking around, this may be an issue with APC? http://pecl.php.net/bugs/bug.php?id=16120&edit=1 (We're running 3.0.19, which shows as latest stable on pecl.) Thoughts? I increased the amount of memory apc uses, but the problem just happened again.

    Read the article

  • How should clients handle HTTP 401 with unknown authentication schemes?

    - by user113215
    What is the proper behavior for an HTTP client receiving a 401 Unauthorized response that specifies only unrecognized authentication schemes? My server supports Kerberos authentication using WWW-Authenticate: Negotiate. On the first request, the server sends a 401 Unauthorized response with a body containing an HTML document. The behavior that I expect is for clients that support Kerberos to perform that authentication and for other clients to simply display the HTML document (a login form). It seems that most of the "other clients" I've encountered do work this way, but a few do not. I haven't found anything that mandates any particular behavior in this situation. There's a brief mention in RFC 2617: HTTP Authentication: Basic and Digest Access Authentication, but is there anything more concrete? It is possible that a server may want to require Digest as its authentication method, even if the server does not know that the client supports it. A client is encouraged to fail gracefully if the server specifies only authentication schemes it cannot handle.

    Read the article

  • virt-viewer slower than virt-manager when viewing

    - by map7
    I've got a thin client server in which I have a few VM's for users under KVM which I manage through virt-manager. What I've noticed is if I start a VM guest on a thin client using the command 'virt-viewer ' then the guest is painfully slow to move around. However if on the same thin client I start the same guest VM through virt-manager it's fast. What are the differences here? Can I start a VM without having the user load up virt-manager and double click on their VM? Should I be looking at using splice in virt-viewer instead of VNC which is what I currently use?

    Read the article

  • dhcpd: varying vendor-class-identifier

    - by jessicah
    I'm having trouble selectively sending parameters in response to a DHCP Inform packet using groups (or even without, just using host declarations) for bootp stuff. My configuration file right now looks like: subnet 130.123.131.128 netmask 255.255.255.128 { allow unknown-clients; } host dev-mac-09 { option vendor-class-identifier "example-identifier"; hardware ethernet 10:9a:dd:51:ff:83; } If I put vendor-class-identifier in the global scope, using tcpdump I can see that the client receives the vendor class option successfully. If I take it out, and just keep it in the host scope (or group scope), the client never receives the option. Specifying option dhcp-parameter-request list 60 doesn't help either. I did try using a class definition inside a group, but then it applied even if the host wasn't a part of the group. As an aside, how do I get detailed logging? At least something to indicate what groups and things got used to generate the response to the client.

    Read the article

  • Vmware software installation error

    - by Perry
    I am trying to install Vmware software, but I am facing the following error: Selecting previously unselected package vmware-view-client:i386. (Reading database ... 239594 files and directories currently installed.) Unpacking vmware-view-client:i386 (from .../vmware-view-client_2.1.0-0ubuntu0.12.04_i386.deb) ... Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Setting up icaclient:i386 (12.1.0) ... dpkg: error processing icaclient:i386 (--configure): subprocess installed post-installation script returned error exit status 2 Setting up vmware-view-client:i386 (2.1.0-0ubuntu0.12.04) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: icaclient:i386 E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up icaclient:i386 (12.1.0) ... dpkg: error processing icaclient:i386 (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: icaclient:i386 Any suggestions on how to fix this issue? Thanks in advance

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >