Search Results

Search found 6619 results on 265 pages for 'gnome activity journal'.

Page 204/265 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

    - by Oleksandr Dudchenko
    I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

    Read the article

  • Radeon HD 2000, 3000, 4000 on 12.10 Quantal: fglrx (legacy) 12.6 unsupported, what to do?

    - by Andrew Mao
    After upgrading to 12.10 quantal, the packaged version of fglrx no longer works. I discovered that this is because there is a separate 'legacy' fglrx driver for the HD 2k-4k series cards, but it is incompatible with the xorg server on 12.10. This is the most current version of the driver for HD 2000 through HD 4000 series cards. You can't use the non-legacy fglrx driver, but you can use the open-source radeon driver if you prefer your WM compositing to be laggy and your YouTube videos to play like they would on a Pentium MMX series: http://support.amd.com/us/kbarticles/Pages/catalyst126legacyproducts.aspx Usually this driver can be installed in the following way, necessary because apt-get install fglrx would pull in the non-legacy driver: wget http://www2.ati.com/drivers/legacy/amd-driver-installer-12.6-legacy-x86.x86_64.zip unzip amd-driver-installer-* sudo sh ./amd-driver-installer-*.run --buildpkg Ubuntu/quantal sudo dpkg -i fglrx*.deb sudo aticonfig --initial -f If you use a different version of fglrx (for example, a newer 12.9 that doesn't support those cards) then the final command will give you an error no supported hardware detected or something similar. However, everything works at this point and you will get a reasonable xorg.conf: ... other stuff Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:5:0" EndSection ... other stuff At this point you're supposed to reboot and everything will be working with the fglrx driver. However, upon rebooting, you'll be treated to the following errors in Xorg.0.log when fglrx attempts to load: (EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: noXFree86DRIExtension Some searching around will show that this is a problem with the legacy ATI drivers not supporting xserver 1.13 or newer. (Arch Linux thread) ATI has released a fixed driver for its most recent (HD 5000 series or later) cards, but not for the 'legacy' cards yet. The non-legacy ATI drivers can't be used with the old cards. What should an Ubuntu user, using one of these HD 2000-4000 series cards, do? Wait for an updated 'legacy' ATI driver that properly works with xserver 1.13? Downgrade back to 12.04 Precise, which uses xserver 1.11? Try to downgrade xserver on 12.10 Quantal to 1.12, which could possibly break Unity and GNOME? Forced upgrade to HD 5000 series or later card? (Not possible with integrated graphics...) Some other 1337 action that fixes this problem painlessly?

    Read the article

  • How do I stop icons appearing on the desktop in a particular area?

    - by Seamus
    When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} Conky solutions have been offered, but perhaps these aren't the best way of approaching it. What I really want is to stop icons even appearing in that part of the desktop window: that is, I want to make part of the desktop real estate "off-limits" to new icons appearing on the desktop.

    Read the article

  • How i can fix " E: Internal Error, No file name for libc6 "

    - by SMAOUH
    Hello all please i need your help to fix this problem i have 2 broken packages system and i can't reinstall them or make any other option : update , upgrade , install & remove app .... Ubuntu 12.04.3 I have not found any solutions please help me sudo apt-get install -f smaouh@Linux:~$ sudo apt-get install -f [sudo] password for smaouh: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libopenal1 libpam-winbind libao-common gnome-exe-thumbnailer libqca2-plugin-ossl gir1.2-champlain-0.12 libmagickcore4 libmagickwand4 libmagickcore4-extra libcapi20-3 python-unidecode libopenal-data liblqr-1-0 gir1.2-gtkchamplain-0.12 unixodbc wine-gecko2.21 libchamplain-0.12-0 python-glade2 imagemagick-common libosmesa6 oss-compat gimp-help-common esound-common gimp-help-en libmpg123-0 ttf-mscorefonts-installer imagemagick winbind libodbc1 fonts-droid fonts-unfonts-core libchamplain-gtk-0.12-0 libclutter-gtk-1.0-0 gir1.2-gtkclutter-1.0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 386 not upgraded. 4 not fully installed or removed. After this operation, 0B of additional disk space will be used. dpkg: error processing libc6 (--configure): libc6:amd64 2.15-0ubuntu10.5 cannot be configured because libc6:i386 is in a different version (2.15-0ubuntu10.4) dpkg: dependency problems prevent configuration of libc-dev-bin: libc-dev-bin depends on libc6 (>> 2.15); however: Package libc6 is not configured yet. libc-dev-bin depends on libc6 (<< 2.16); however: Package libc6 is not configured yet. dpkg: error processing libc-dev-bin (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-dev: libc6-dev depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. libc6-dev depends on libc-dev-bin (= 2.15-0ubuntu10.5); however: Package libc-dev-bin is not configured yet. dpkg: error processing libc6-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-i386: libc6-i386 depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. dpkg: error processing libc6-i386 (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already Errors were encountered while processing: libc6 libc-dev-bin libc6-dev libc6-i386 E: Sub-process /usr/bin/dpkg returned an error code (1) smaouh@Linux:~$

    Read the article

  • How to generate xorg.conf? (X -configure segfaults)

    - by Nicolas Raoul
    My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

    Read the article

  • Ubuntu 14.04 : Lost my sound randomly tried a few commands and I think I failed

    - by Marc-Antoine Théberge
    I lost my sound the other day and I tried to delete pulseaudio then reinstall, then I tried to delete it and install alsa, It did not work and I had to reinstall everything; overall bad idea... now I can't have any sound. Should I do a fresh install? I don't know how to boot an usb drive with GRUB... Here's my sysinfo System information report, generated by Sysinfo: 2014-05-28 05:45:58 http://sourceforge.net/projects/gsysinfo SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release. GNOME: 3.8.4 (Ubuntu 2014-03-17) Kernel version: 3.13.0-27-generic (#50-Ubuntu SMP Thu May 15 18:08:16 UTC 2014) GCC: 4.8 (i686-linux-gnu) Xorg: 1.15.1 (16 April 2014 01:40:08PM) (16 April 2014 01:40:08PM) Hostname: mark-laptop Uptime: 0 days 11 h 43 min CPU INFORMATION GenuineIntel, Intel(R) Atom(TM) CPU N270 @ 1.60GHz Number of CPUs: 2 CPU clock currently at 1333.000 MHz with 512 KB cache Numbering: family(6) model(28) stepping(2) Bogomips: 3192.13 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm dtherm MEMORY INFORMATION Total memory: 2007 MB Total swap: 1953 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: ST9160310AS HARDWARE INFORMATION MOTHERBOARD Host bridge Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 8340 PCI bridge(s) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) ISA bridge Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f IDE interface Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 830f GRAPHIC CARD VGA controller Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8340 SOUND CARD Multimedia controller Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 831a NETWORK Ethernet controller Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324

    Read the article

  • how do I get dual monitors to work properly in Ubuntu 11.10 on a Dell Latitude D630?

    - by wes cook
    I have spent a lot of time trying to get dual monitors to work on Ubuntu 11.10 on my Dell Latitude D630 (nVidia NVS 135m video card). - For starters, the System Displays settings app always only showed one unknown monitor, even though I had the external Acer monitor connected. - So I downloaded and installed the nVidia drivers. According to what I read I would need to only use the nVidia driver app (nVidia X Server Settings), so that's what I've done. (System Displays settings continued to only show a single monitor anyway). - nVidia settings app only showed on monitor until I changed the BIOS setting to use the onboard video for external monitor (not the dock video, which it was set to, even though I don't have a docking station). - The nVidia setting app now recognized both monitors. So, I setup the X Server display config as Separate X screen for both monitors. My laptop screen shows up as AUO 1440x900 and my external monitor as Acer E211H 1920x1080. - Everything seemed like it would work, but the external monitor was just a complete white screen. The external monitor was non-functional, even though sometimes it would show the background image - still nothing would show up over there. - So, I checked the Enable Xinerama box. - Now, after logging out and back in, the wallpaper extends to both screens but I get no taskbar at the bottom or top, no system menus, and I have to press the power button to restart or log off. - After experimenting with all the shells, the only one that shows the menus and taskbars when I log in is Gnome Classic. - This is pretty much the same symptoms as found here: How do I fix 11.10 GUI?. - So, I resign myself to the older shell. - Everything works fine until ... I unplug the external monitor ... this is a laptop after all. - Anyway, after doing some work on the road, I plug back in and I still see both screens and it's functional except, ... - Now, the laptop screen (with the taskbar and menu bar) has 4 black bars at the top that windows cannot cover. The top bar is the menu bar (with Applications, Places, the date and time and the system menu on the right). But the next 3 bars (the same height as the top menu bar) are empty and are just reducing the max size of windows on that screen. - See screenshot here: http://i39.tinypic.com/35d2kh1.png - So ... 1. How do I get rid of those extra 3 black bars? They're taking valuable screen space. 2. (less critical) How do I successfully use both screens in the Ubuntu or Ubuntu 2D shell?

    Read the article

  • How do I stop icons appearing on the desktop under conky?

    - by Seamus
    When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr}

    Read the article

  • Cursor running wild, then crashes on an Asus G73sw

    - by Yarchmon
    The cursor sometimes goes wild, I get random clicks, the windows are resizing, the cursor disappears. In the worst case, clicks and keyboards are disabled. I've tried the solution given on doc.ubuntu-fr.org and add tu grub : i8042.nomux=1 i8042.reset=1 in GRUB_CMDLINE_LINUX_DEFAULT But it didn't work What can I do ? Graphic card : Geforce GTX460M. Ubuntu : 11.10 (64 bits). Laptop Asus G73sw Interface : Unity (since 11.10) - didn't get this problem with Gnome before. Complement: when a window is resizing, it gets drag-boxes at every corner, center of sides and center of the window. It looks like my touchpad sends random info, or like a "ghost" touchscreen. lspci result : 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GTX 460M] (rev a1) 01:00.1 Audio device: nVidia Corporation GF106 High Definition Audio Controller (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB Controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Edit 01-09-12: Tried on Ubuntu 2D: the behavior is different: it's like i'm randomly clicking on the workspace switcher icon. In the worst case, it can happen several times in a minute.

    Read the article

  • What is the correct way to use g_signal_connect() in C++ for dynamic unity quicklists?

    - by hakermania
    I want to make my application use dynamic unity quicklists. For building my application I am using C++ and the QtCreator IDE. When a menu action is triggered I want to be able to have access to a non-static function of my MainWindow class so as to be able to update the Graphical User Interface which can be accessed from inside 'normal' MainWindow's functions. So, I am building up my quicklist like this (mainwindow.cpp): void MainWindow::enable_unity_quicklist(){ Unity_Menu = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set_bool (Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, FALSE); Unity_Stop = dbusmenu_menuitem_new(); dbusmenu_menuitem_property_set(Unity_Stop, DBUSMENU_MENUITEM_PROP_LABEL, "Stop"); dbusmenu_menuitem_child_append (Unity_Menu, Unity_Stop); g_signal_connect (Unity_Stop, DBUSMENU_MENUITEM_SIGNAL_ITEM_ACTIVATED, G_CALLBACK(&fake_callback), (gpointer)this); if(!unity_entry) unity_entry = unity_launcher_entry_get_for_desktop_id("myapp.desktop"); unity_launcher_entry_set_quicklist(unity_entry, Unity_Menu); dbusmenu_menuitem_property_set_bool(Unity_Menu, DBUSMENU_MENUITEM_PROP_VISIBLE, true); dbusmenu_menuitem_property_set_bool(Unity_Stop, DBUSMENU_MENUITEM_PROP_VISIBLE, true); } void MainWindow::fake_callback(gpointer data){ MainWindow* m = (MainWindow*)data; m->on_stopButton_clicked(); } void MainWindow::on_stopButton_clicked(){ //stopping the process... } mainwindow.h: private slots: void enable_unity_quicklist(); void on_stopButton_clicked(); public slots: static void fake_callback(gpointer data); This suggestion was taken from http://old.nabble.com/Using-g_signal_connect-in-class-td18461823.html The program crashes immediately after I choose the 'Stop' action from the Unity Quicklist. Debugging the program shows that I am not able to access anything MainWindow related inside the on_stopButton_clicked() without crashing. For example, it crashes when doing this check (which is the first 2 lines of code inside this function): if (!ui->stopButton->isEnabled()) return; I have also tested lots of other things that I found at the internet, but nothing of them worked. One interesting solution would be to use gtkmm (http://developer.gnome.org/gtkmm-tutorial/stable/sec-connecting-signal-handlers.html.en) but I am not used at all working on GTK applications (I work solely in Qt) and I don't know if this even suits to my occasion. A compilable example indicating what the problem is can be found at: http://ubuntuone.com/7iKA3wnPmWVp8YNNDLlVQI (3.2Kb) If you are not familiar with the QtCreator IDE, you can compile with the following commands, as long as you have all the needed libraries: cd dynamic_unity_quicklists_test; qmake -project; qmake; make

    Read the article

  • Why does the login screen fail to appear?

    - by a different ben
    My system: Dell Precision T3500 nVidia Quadro NVS 295 Ubuntu 12.04 x86_64 (3.2.0-32) Essential problem: On boot my system won't get past the splash screen. I can switch to another virtual terminal and log in, I can also ssh from another system -- so it appears that the problem might be with the display manager. How can I diagnose and fix this problem? More info: From a VT I can issue sudo lightdm restart, and this will bring up the login screen and and I can continue from there. So I do have access to my system. Update-manager recently updated a number of packages, including a bunch of x11 and xorg packages, some nVidia drivers, rpcbind, etc etc. My boot log (if that is any guidance) says the following: fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 rpcbind: Cannot open '/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory) rpcbind: Cannot open '/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory) /dev/sda1: clean, 597650/1525920 files, 3963433/6103296 blocks /dev/sda7: clean, 11/6406144 files, 450097/25608703 blocks /dev/sda5: clean, 158323/1525920 files, 1886918/6103296 blocks /dev/sda8: clean, 250089/107929600 files, 111088810/431689728 blocks Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A * Starting ClamAV virus database updater freshclam [80G [74G[ OK ] * Starting Name Service Cache Daemon nscd [80G [74G[ OK ] * Starting modem connection manager[74G[ OK ] * Starting K Display Manager[74G[ OK ] * Starting mDNS/DNS-SD daemon[74G[ OK ] * Stopping GNOME Display Manager[74G[ OK ] * Stopping K Display Manager[74G[ OK ] * Starting bluetooth daemon[74G[ OK ] * Starting network connection manager[74G[ OK ] * Starting Postfix Mail Transport Agent postfix [80G [74G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher * Starting VirtualBox kernel modules [80G [74G[ OK ] * Starting the Winbind daemon winbind [80G [74G[ OK ] saned disabled; edit /etc/default/saned * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ] * Checking battery state... [80G [74G[ OK ] nxsensor is disabled in '/usr/NX/etc/node.cfg' Trying to start NX server: NX 122 Service started. NX 999 Bye. Trying to start NX statistics: NX 723 Cannot start NX statistics: NX 709 NX statistics are disabled for this server. NX 999 Bye. * Stopping System V runlevel compatibility[74G[ OK ] * Starting Mount network filesystems[74G[ OK ] * Stopping Mount network filesystems[74G[ OK ] * Stopping regular background program processing daemon[74G[ OK ] * Starting regular background program processing daemon[74G[ OK ] * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ]

    Read the article

  • I cannot remove/install software some dependency issue?

    - by Ryuzaki
    I'm having difficulty trying to install/uninstall applications in Ubuntu 12.04 LTS. I have this warning error that appears on my desktop in the form of a red icon with a line through it and it states: An error occurred, please run Package Manager from the right-click menu or apt-get in a terminal to see what is wrong. The error message was: 'Error: BrokenCount 0' — This usually means that your installed packages have unmet dependencies. I tried to repair automatically through ubuntu software center and I kept getting errors or it just didn't seem to work. Afterwards, I opened terminal and used sudo apt-get check command to see what the problem was and the results yielded: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libjack-jackd2-0 : Breaks: libjack-jackd2-0:i386 (!= 1.9.8~dfsg.1-1ubuntu1) but 1.9.8~dfsg.2-1precise1 is installed libjack-jackd2-0:i386 : Breaks: libjack-jackd2-0 (!= 1.9.8~dfsg.2-1precise1) but 1.9.8~dfsg.1-1ubuntu1 is installed E: Unmet dependencies. Try using -f. After I ran sudo apt-get -f install (in an attempt to fix the issue at hand), I encountered the following errors/code: okudaira@haru-kano:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 24 not upgraded. 1 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 181702 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) The real problem I'm having is interpreting what is being stated. I'm fairly new to the ubuntu experience so I'm not very well-versed with the terminology and the entire in's and out's. Can someone tell me what's wrong with my system? I can no longer install/remove any programs at all.

    Read the article

  • How do I set image position in conky

    - by realitygenerator
    I copied and modified an existing .conkyrc file from the ubuntu forum and I'm trying to place the LinuxMint logo in a specific position Below are my conkyrc file and the screenshot # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type desktop own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont URW Gothic:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left #alignment top_right #alignment bottom_left #alignment bottom_right. alignment top_middle # Gap between borders of screen and text gap_x 10 gap_y 10 #Display temp in fahrenheit temperature_unit fahrenheit #Choose which screen on which to display # stuff after 'TEXT' will be formatted on screen TEXT $color ${color green}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine LinuxMint 11 "Katya" (Oneric) ${image ~/Conky/Logo_Linux_Mint.png -s 80x60 -f 86400} ${color green}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${hwmon temp 1} $cpubar ${cpugraph 000000 ffffff} NAME PID CPU% MEM% ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4} ${color green}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Root: ${fs_free_perc /}% ${fs_bar 6 /}$color hda1: ${fs_free_perc /media/sda1}% ${fs_bar 6 /media/sda1}$color ${color green}NETWORK (${addr eth1}) ${hr 2}$color Down: $color${downspeed eth1} k/s ${alignr}Up: ${upspeed eth1} k/s ${downspeedgraph eth1 25,140 000000 ff0000} ${alignr}${upspeedgraph eth1 25,140 000000 00ff00}$color Total: ${totaldown eth1} ${alignr}Total: ${totalup eth1} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color green}LOGGING ${hr 2}$color ${execi 30 tail -n3 /var/log/messages | awk '{print " ",$5,$6,$7,$8,$9,$10}' | fold -w50} ${color green}FORTUNE ${hr 2}$color ${execi 120 fortune -s | fold -w50} I want to put the mint logo right after the word (oneric). Any help would be greatly appreciated.

    Read the article

  • Nautilus ignores / misinterprets view size

    - by BlueZero4
    I noticed that a lot of my folders had suddenly switched to higher view sizes than I had specificied. I was assuming that somehow nautilus had suddenly decided to create per-folder entries for said folders with incorrect view sizes. So I found this question: How to reset all per-folder view settings in nautilus? I found the folder specified in the answer (~/.local/share/gvfs-metadata) and found that it was actually important to delete the files INSIDE the folder, because for some reason deleting the folder itself didn't work for some reason. After doing that, I discovered that the odd setting was for the default view settings, not for a handful of files. Nautilus actually handles the per-folder settings like it should, but it ignores the global folder settings. I want Nautilus to, by default, display all non-specified folders as compact view, 50%. My folders are using the compact setting like I want, but they are not down to 50%. At a guess, they are at 100%. Altering the view size of the icon view can set the compact view to 33%, but I'm not sure by what mechanism this functions. I haven't extensively tested the other view sizes because I don't plan on using them much at all. Next I looked up questions like How do I reset nautilus to the default configuration? I'm expecting the problem to be a corrupted config file or something of the sort, so I hunted down directories like ~/.nautilus, ~/.gconf/apps/nautilus, and ~/.gnome2/nautilus. (I don't have a ~/.nautilus directory, so I'm assuming that's only for older versions.) I attempted to remove the contents of each, but I can't seem to force Nautilus back to default configuration settings. Actually viewing Nautilus's preferences in GConf made the settings look like they were what I wanted them to be, which is odd. I'd like to force Nautilus to default settings, basically. Though if something else will fix it, I'll take it too. I'm not interested in doing a full uninstall, reinstall of Nautilus if I don't have to. ==EDIT1== Turns out that Nautilus just writes the settings in GConf for the heck of it. Nautilus only really uses the settings that it stores in DConf. I did gsettings reset-recursively org.gnome.nautilus, which actually did reset Nautilus to default, but it still doesn't like my view size settings.

    Read the article

  • Cannot install wine on Ubuntu natty 64bit [broken dependency]

    - by MHK
    I've just installed Ubuntu natty 64bit. Now I'm trying to install wine and no matter how I do it (Software center/synaptic/terminal), it fails. Here's what I tried on terminal: sudo apt-get update sudo apt-get install wine It shows: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.3 but it is not going to be installed Depends: ia32-libs (>= 1.6) but it is not going to be installed Depends: lib32asound2 (> 1.0.14) but it is not going to be installed Depends: libc6-i386 (>= 2.6-1) but it is not going to be installed Depends: lib32nss-mdns (>= 0.10-3) but it is not going to be installed E: Broken packages Any body faced this? Is this a bug or something is broken on my end? Any hints on how to solve? Edit: I've tried with aptitude, it gives more clear message: sudo aptitude install wine Output: The following NEW packages will be installed: gnome-exe-thumbnailer{a} ia32-libs{a} icoutils{a} imagemagick{a} lib32asound2{ab} lib32bz2-1.0{a} lib32gcc1{ab} lib32ncurses5{a} lib32nss-mdns{a} lib32stdc++6{ab} lib32v4l-0{ab} lib32z1{a} libc6-i386{ab} libcdt4{a} libgraph4{a} libgvc5{a} libilmbase6{a} liblqr-1-0{a} libmagickcore3{a} libmagickcore3-extra{a} libmagickwand3{a} libnetpbm10{a} libopenexr6{a} libpathplan4{a} netpbm{a} ttf-droid{a} ttf-symbol-replacement-wine1.3{a} ttf-umefont{a} winbind{a} wine wine1.3{a} wine1.3-gecko{a} winetricks{a} 0 packages upgraded, 33 newly installed, 0 to remove and 0 not upgraded. Need to get 135 MB of archives. After unpacking 421 MB will be used. The following packages have unmet dependencies: libc6-i386: Depends: libc6 (= 2.12.1-0ubuntu16) but 2.13-0ubuntu13 is installed. lib32gcc1: Depends: gcc-4.5-base (= 4.5.2-2ubuntu3) but 4.5.2-8ubuntu4 is installed. lib32asound2: Depends: libasound2 (= 1.0.23-2.1ubuntu2) but 1.0.24.1-0ubuntu5 is installed. lib32stdc++6: Depends: gcc-4.5-base (= 4.5.2-2ubuntu3) but 4.5.2-8ubuntu4 is installed. lib32v4l-0: Depends: libv4l-0 (= 0.8.1-2) but 0.8.3-1 is installed. The following actions will resolve these dependencies: Keep the following packages at their current version: 1) ia32-libs [Not Installed] 2) lib32asound2 [Not Installed] 3) lib32bz2-1.0 [Not Installed] 4) lib32gcc1 [Not Installed] 5) lib32ncurses5 [Not Installed] 6) lib32nss-mdns [Not Installed] 7) lib32stdc++6 [Not Installed] 8) lib32v4l-0 [Not Installed] 9) lib32z1 [Not Installed] 10) libc6-i386 [Not Installed] 11) wine [Not Installed] 12) wine1.3 [Not Installed] Leave the following dependencies unresolved: 13) wine1.3-gecko recommends wine1.3 14) winetricks recommends wine1.2 | wine1.3 | cxoffice5 | cxgames5 It seems the wine package hasn't been updated in the repo. What should I do now?

    Read the article

  • Can't fix broken packages using Synaptic (Broken Package: Wine1.4)

    - by Rustyblade
    Ok so I am trying to fix a broken package in order to install wine. When I do "sudo apt-get install wine" I get: sam@ubuntu:~$ sudo apt-get install wine [sudo] password for sam: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.4 but it is not going to be installed E: Unable to correct problems, you have held broken packages. Then I try "sudo apt-get install wine1.4" sam@ubuntu:~$ sudo apt-get install wine1.4 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) but it is not installable Recommends: gnome-exe-thumbnailer but it is not going to be installed or kde-runtime but it is not going to be installed Recommends: winetricks but it is not going to be installed E: Unable to correct problems, you have held broken packages. So someone told me to try Synaptic. Here is what I tried: Searched wine Right clicked wine1.4 Said I needed to mark other packages Mark I click Apply. It says, You have to fix broken packages first! I do EditFix Broken Packages I get this E: Unable to correct problems, you have held broken packages. E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies I am really frustrated. I removed the Official Wine PPA and tried it I even tried $ sudo apt-get -f install 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Please help me :( System: Ubuntu 12.10 64bit

    Read the article

  • Evolution laggy due to IMAP -profile or due to some odd Sync -issue?

    - by Izzy
    I'm fighting with Evolution. Basically it's working fine -- but it is very slow to react in certain situations. Helper questions Could it be that changing away from Bonobo has to do with slowing-down? There might be some trouble with the new engine and "asynchronous actions". What to do about it? Are there e.g. any configuration files? I want to get the previous "working mood" back. How can I speed this thing up? Different scenarios when sending a mail, the composer window hangs there inactive for a couple of seconds, everything grayed out. Though there is a green check mark saying it's sent, I'm not sure a) why it's still blocking everything and b) whether I could simply close it without "breaking"/"losing" anything. In earlier versions, the composer window was closing pretty fast, and one could see the message being stored into the local "outbox" until it was sent, and one could immediately continue with the next task. I prefer that behaviour over the current, where I cannot do anything in the application until the window closes. switching between modules. Coming from mail and switching to the address book takes a couple of seconds. Same for switching to the calendar. I read about different "possible causes" and tried a few things: I only have 3 local address books, so no networking should be involved here. To make sure, I switched to offline mode and then tried to access the address book. No noticeable difference. I use 3 Google Calendars. Switching to offline mode made a minor difference, but so minor that it also could be "imagination" since one might have expected this in this case according to some reports, disabling the tasks should help. Well, it didn't in my case, as I don't use them regularly (just two local items stored here) Maybe I should also mention that I'm using the KDE4 desktop (so no Unity or Gnome, though both is installed on the computer). And I did not have this issue before I updated to 12.04.

    Read the article

  • Is is possible to get a patch included in the current release? If so, how?

    - by Oli
    So a while back I reported a bug in Compiz's Place Window plugin. It's a fairly major regression for people affected by it: mainly those using Gnome-Fallback, judging by the reports. A patch surfaced a short time later. I created a PPA for testing and everybody involved so far is reporting the issues are fixed. It even fixes another bug. I've done testing with a standard Unity desktop and can say (for my testing) no adverse effects were visible. I want to get this pushed to Ubuntu right now for two main reasons: I'm selfish. I don't want to need to update my PPA every time a new version of Compiz is pushed to 12.04. I don't want Ubuntu users seeing their windows flying around because of a silly little bug. I want this patch pushed to Ubuntu's version of Compiz as soon as possible, so we can mark these bugs fixed and move on with our lives. Whose leg do I have to hump to get this pulled into Ubuntu right now? I don't maintain this project and it's an upstream thing but it's fairly integral to Ubuntu. I could go to Compiz but I imagine that if they accept the patch, it'll be months (at least a release) before it's anywhere near Ubuntu. And when I do find the right person, how can I make the process as slick as possible for them? I want them to see my request, go "Yup, that all looks great, done" and that be it. I don't want seventeen rounds of emails addressing aspects of the patch. More importantly, I don't want to waste their time either. And what do I have to provide them? My packaging skills are... lamentable. This was my first attempt at patching a package for redistribution so I've probably made every single packaging error known to man. Will they be happy with the original patch (so they can apply it themselves) or should I repackage things so the diff/changelog is a little cleaner (it took me a few goes and the versioning is all over the place). Note: This question is about Compiz but I'd prefer if answers could address other styles of package too so we have an authoritative and comprehensive thread of how to get things fixed.

    Read the article

  • Django: CharField with fixed length, how?

    - by Giovanni Di Milia
    Hi everybody, I wold like to have in my model a CharField with fixed length. In other words I want that only a specified length is valid. I tried to do something like volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) but it gives me an error (it seems that I can use both max_length and min_length at the same time). Is there another quick way? Thanks EDIT: Following the suggestions of some people I will be a bit more specific: My model is this: class Volume(models.Model): vid = models.AutoField(primary_key=True) jid = models.ForeignKey(Journals, db_column='jid', null=True, verbose_name = "Journal") volumenumber = models.CharField('Volume Number') date_publication = models.CharField('Date of Publication', max_length=6, blank=True) class Meta: db_table = u'volume' verbose_name = "Volume" ordering = ['jid', 'volumenumber'] unique_together = ('jid', 'volumenumber') def __unicode__(self): return (str(self.jid) + ' - ' + str(self.volumenumber)) What I want is that the volumenumber must be exactly 4 characters. I.E. if someone insert '4b' django gives an error because it expects a string of 4 characters. So I tried with volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) but it gives me this error: Validating models... Unhandled exception in thread started by <function inner_run at 0x70feb0> Traceback (most recent call last): File "/Library/Python/2.5/site-packages/django/core/management/commands/runserver.py", line 48, in inner_run self.validate(display_num_errors=True) File "/Library/Python/2.5/site-packages/django/core/management/base.py", line 249, in validate num_errors = get_validation_errors(s, app) File "/Library/Python/2.5/site-packages/django/core/management/validation.py", line 28, in get_validation_errors for (app_name, error) in get_app_errors().items(): File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 131, in get_app_errors self._populate() File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 58, in _populate self.load_app(app_name, True) File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 74, in load_app models = import_module('.models', app_name) File "/Library/Python/2.5/site-packages/django/utils/importlib.py", line 35, in import_module __import__(name) File "/Users/Giovanni/src/djangoTestSite/../djangoTestSite/journaldb/models.py", line 120, in <module> class Volume(models.Model): File "/Users/Giovanni/src/djangoTestSite/../djangoTestSite/journaldb/models.py", line 123, in Volume volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) TypeError: __init__() got an unexpected keyword argument 'min_length' That obviously doesn't appear if I use only "max_length" OR "min_length". I read the documentation on the django web site and it seems that I'm right (I cannot use both together) so I'm asking if there is another way to solve the problem. Thanks again

    Read the article

  • How to submit the correct div elements (not the div that's hidden)?

    - by user356651
    Hello, I have the following code working fine but the problem is that it always submits the first div (article) even though it's hidden. My question is how do I submit the form and the elements in the form in the div that's shown? (if I select Music radiobutton, I want to submit the input elements of the Music Div not the Article div. Thanks. $(document).ready(function(){ $("input[name$='itemlist']").click(function() { var selection = $(this).val(); $("div.box").hide(); $("#"+selection).show(); }); }); <!--radio buttons--> <div id="articleselection"><input name="itemlist" type="radio" value="article" /> Article/Book </div> <div id="musicselection"><input name="itemlist" type="radio" value="music" /> Music</div> <!--article div starts--> <div id="article" class="box"> <table class="fieldgroup"> <tr><td>Journal Title: <input id="JournalTitle" name="JournalTitle" type="text" size="60" class="f-name" tabindex="1" value="JournalTitle"> </table> <table class="fieldgroup"> <tr><td>Article Author: <input id="ArticleAuthor" name="ArticleAuthor" type="text" size="40" class="f-name" tabindex="2" value="<"ArticleAuthor"></td></tr> </table> </div> <!--music div starts--> <div id="music" class="box"> <table class="fieldgroup"> <tr><td>Music Title: <input id="Music Title" name="Music Title" type="text" size="60" class="f-name" tabindex="1" value="Music Title"> </table> <table class="fieldgroup"> <tr><td> Music Author: <input id="MusicAuthor" name="Music Author" type="text" size="40" class="f-name" tabindex="2" value="<"MusicAuthor"></td></tr> </table> </div>

    Read the article

  • yum update works but yum --security update fails to work in Fedora 12

    - by bobo
    I had already installed the yum-security before. And I was going to do an update by entering the following command: [root@localhost /]# yum update Loaded plugins: presto, priorities, refresh-packagekit, security Skipping security plugin, no data Setting up Update Process Resolving Dependencies Skipping security plugin, no data --> Running transaction check ---> Package eject.i686 0:2.1.5-17.fc12 set to be updated ---> Package glibc.i686 0:2.11.1-4 set to be updated ---> Package glibc-common.i686 0:2.11.1-4 set to be updated ---> Package glibc-devel.i686 0:2.11.1-4 set to be updated ---> Package glibc-headers.i686 0:2.11.1-4 set to be updated ---> Package gnome-themes.noarch 0:2.28.1-3.fc12 set to be updated ---> Package gtk2.i686 0:2.18.9-3.fc12 set to be updated ---> Package gtk2-immodule-xim.i686 0:2.18.9-3.fc12 set to be updated ---> Package kernel-PAE.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-PAE-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-PAEdebug-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-debug-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-devel.i686 0:2.6.32.11-99.fc12 set to be installed ---> Package kernel-firmware.noarch 0:2.6.32.11-99.fc12 set to be updated ---> Package kernel-headers.i686 0:2.6.32.11-99.fc12 set to be updated ---> Package libnetfilter_conntrack.i686 0:0.0.101-1.fc12 set to be updated ---> Package media-player-info.noarch 0:5-1.fc12 set to be updated ---> Package nscd.i686 0:2.11.1-4 set to be updated ---> Package perf.noarch 0:2.6.32.11-99.fc12 set to be updated ---> Package rhythmbox.i686 0:0.12.6-5.fc12 set to be updated ---> Package sysvinit-tools.i686 0:2.87-3.dsf.fc12 set to be updated --> Finished Dependency Resolution --> Running transaction check ---> Package kernel-PAE.i686 0:2.6.31.12-174.2.3.fc12 set to be erased --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: kernel-PAE i686 2.6.32.11-99.fc12 updates 20 M kernel-PAE-devel i686 2.6.32.11-99.fc12 updates 6.2 M kernel-PAEdebug-devel i686 2.6.32.11-99.fc12 updates 6.2 M kernel-debug-devel i686 2.6.32.11-99.fc12 updates 6.2 M kernel-devel i686 2.6.32.11-99.fc12 updates 6.1 M Updating: eject i686 2.1.5-17.fc12 updates 49 k glibc i686 2.11.1-4 updates 4.2 M glibc-common i686 2.11.1-4 updates 14 M glibc-devel i686 2.11.1-4 updates 953 k glibc-headers i686 2.11.1-4 updates 590 k gnome-themes noarch 2.28.1-3.fc12 updates 1.5 M gtk2 i686 2.18.9-3.fc12 updates 3.2 M gtk2-immodule-xim i686 2.18.9-3.fc12 updates 60 k kernel-firmware noarch 2.6.32.11-99.fc12 updates 968 k kernel-headers i686 2.6.32.11-99.fc12 updates 749 k libnetfilter_conntrack i686 0.0.101-1.fc12 updates 37 k media-player-info noarch 5-1.fc12 updates 32 k nscd i686 2.11.1-4 updates 189 k perf noarch 2.6.32.11-99.fc12 updates 79 k rhythmbox i686 0.12.6-5.fc12 updates 4.0 M sysvinit-tools i686 2.87-3.dsf.fc12 updates 58 k Removing: kernel-PAE i686 2.6.31.12-174.2.3.fc12 @updates 72 M Transaction Summary ================================================================================ Install 5 Package(s) Upgrade 16 Package(s) Remove 1 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) Total download size: 75 M Is this ok [y/N]: But then I changed my mind, I decided to do a security-only update instead of a full update, so I entered the following command: [root@localhost /]# yum --security update Loaded plugins: presto, priorities, refresh-packagekit, security Setting up Update Process Resolving Dependencies Limiting packages to security relevant ones http://download.fedoraproject.org/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.cuhk.edu.hk/pub/linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.cuhk.edu.hk/pub/linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.cuhk.edu.hk/pub/linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.riken.jp/Linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.riken.jp/Linux/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirror.cse.iitk.ac.in/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirror.cse.iitk.ac.in/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirrors.isu.net.sa/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirrors.isu.net.sa/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. ftp://ftp.chu.edu.tw/linux/Fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno -1] Metadata file does not match checksum Trying other mirror. http://mirror.yandex.ru/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirror.yandex.ru/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://linus.iyte.edu.tr/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://linus.iyte.edu.tr/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.jaist.ac.jp/pub/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.jaist.ac.jp/pub/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.kddilabs.jp/Linux/packages/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://srv2.ftp.ne.jp/Linux/packages/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://www.ftp.ne.jp/Linux/distributions/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://srv2.ftp.ne.jp/Linux/distributions/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.rhd.ru/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.rhd.ru/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirrors.163.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirrors.163.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirror.nus.edu.sg/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirror.nus.edu.sg/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.yz.yamagata-u.ac.jp/pub/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.yz.yamagata-u.ac.jp/pub/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.linux.org.tr/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.linux.org.tr/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://mirrors.cytanet.com.cy/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://mirrors.cytanet.com.cy/linux/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://fedoramirror.hnsdc.com/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://fedoramirror.hnsdc.com/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.twaren.net/Linux/Fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://c147.twaren.net/pub/Linux/Fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.mirror.tw/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.mirror.tw/pub/fedora/linux/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ftp.cs.pu.edu.tw/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ftp.cs.pu.edu.tw/Linux/Fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. http://ubuntu.cn99.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz: [Errno 14] HTTP Error 416 : http://ubuntu.cn99.com/fedora/updates/12/i386/repodata/updateinfo.xml.gz Trying other mirror. Error: failure: repodata/updateinfo.xml.gz from updates: [Errno 256] No more mirrors to try. You could try using --skip-broken to work around the problem ^C[root@localhost /]# As it can be seen in the output, when I run the yum --security update command, it did show the Limiting packages to security relevant ones message so it's aware of the option. But I don't know why it keeps reporting the http error 416. I searched in google and found the following description of the error but it doesn't seem to help much. HTTP ERROR 416 - Requested Range Not Satisfiable A 416 status code indicates that the server was unable to fulfill the request. This may be, for example, because the client asked for the 800th-900th bytes of a document, but the document was only 200 bytes long. It suggests me to use the --skip-broken option, I tried and the output is the same. I already tested many times, it just doesn't work when the --security option is used. What could be the possible cause for this problem?

    Read the article

  • javaws not found

    - by Hunt
    I have a server which has centos installed in it. Recently I have installed jdk 1.6 into it. When I try to run java command from shell it's working perfectly fine. Java is stored into /usr/java/jdk1.6.0_25 and path is set to /usr/bin/ when I type which java. When I tried running javaws (which comes with the jdk 1.6 only) it is showing me following error: Java Web Start splash screen process exiting ... Bad installation: JAVAWS_HOME not set: No such file or directory Executing env command prints following details: HOSTNAME=XX-XXX-XXX-XX TERM=xterm SHELL=/bin/bash HISTSIZE=1000 OLDPWD=/usr/java SSH_TTY=/dev/pts/1 USER=root LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35: JAVA_PATH=/usr/java/jre1.6.0_24/jre/bin MAIL=/var/spool/mail/root PATH=/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/usr/java/jre1.6.0_24/jre/bin INPUTRC=/etc/inputrc PWD=/usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin JAVA_HOME=/usr/java/jre1.6.0_24/jre/bin LANG=en_US.UTF-8 SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass SHLVL=1 HOME=/root LOGNAME=root JAVAWS_HOME=/usr/java/jre1.6.0_24/bin SSH_CONNECTION=175.100.170.26 3387 64.150.190.94 22 LESSOPEN=|/usr/bin/lesspipe.sh %s G_BROKEN_FILENAMES=1 _=/bin/env

    Read the article

  • Ubuntu 12.04 Preseed LDAP Config

    - by Arturo
    I'm trying to deploy Ubuntu 12.04 via xCAT, everything works except the automatic configuration of LDAP, the preseed file is read but the file /etc/nsswitch is not written properly. My Preseed File: [...] ### LDAP Setup nslcd nslcd/ldap-bindpw password ldap-auth-config ldap-auth-config/bindpw password ldap-auth-config ldap-auth-config/rootbindpw password ldap-auth-config ldap-auth-config/binddn string cn=proxyuser,dc=example,dc=net libpam-runtime libpam-runtime/profiles multiselect unix, ldap, gnome-keyring, consolekit, capability ldap-auth-config ldap-auth-config/dbrootlogin boolean false ldap-auth-config ldap-auth-config/rootbinddn string cn=manager,dc=xcat-domain,dc=com nslcd nslcd/ldap-starttls boolean false nslcd nslcd/ldap-base string dc=xcat-domain,dc=com ldap-auth-config ldap-auth-config/pam_password select md5 ldap-auth-config ldap-auth-config/move-to-debconf boolean true ldap-auth-config ldap-auth-config/ldapns/ldap-server string ldap://192.168.32.42 ldap-auth-config ldap-auth-config/ldapns/base-dn string dc=xcat-domain,dc=com ldap-auth-config ldap-auth-config/override boolean true libnss-ldapd libnss-ldapd/clean_nsswitch boolean false libnss-ldapd libnss-ldapd/nsswitch multiselect passwd,group,shadow nslcd nslcd/ldap-reqcert select ldap-auth-config ldap-auth-config/ldapns/ldap_version select 3 ldap-auth-config ldap-auth-config/dblogin boolean false nslcd nslcd/ldap-uris string ldap://192.168.32.42 nslcd nslcd/ldap-binddn string [...] After the installation, nsswitch.conf rimains unchanged. Has someone an idea?? Thanks!

    Read the article

  • uninstall google chrome in fedora

    - by tbleckert
    Yesterday I installed Fedora 15 Beta with GNOME 3 - it works well. One problem though is that I installed Chrome 32-bit (which was wrong, should have been the 64-bit version) and now I can't uninstall it. I can't find it in Add/Remove Software, and I also can't install the correct version of Chrome because it complains about my other copy of Chrome. Any ideas how I can remove the existing copy and get the 64-bit version installed? Here's the message I get when trying to install: Test Transaction Errors: file /etc/cron.daily/google-chrome from install of google-chrome-stable-11.0.696.65-84435.x86_64 conflicts with file from package google-chrome-stable-11.0.696.65-84435.i386 file /opt/google/chrome/chrome from install of google-chrome-stable-11.0.696.65-84435.x86_64 conflicts with file from package google-chrome-stable-11.0.696.65-84435.i386 file /opt/google/chrome/chrome-sandbox from install of google-chrome-stable-11.0.696.65-84435.x86_64 conflicts with file from package google-chrome-stable-11.0.696.65-84435.i386 file /opt/google/chrome/libffmpegsumo.so from install of google-chrome-stable-11.0.696.65-84435.x86_64 conflicts with file from package google-chrome-stable-11.0.696.65-84435.i386 file /opt/google/chrome/libpdf.so from install of google-chrome-stable-11.0.696.65-84435.x86_64 conflicts with file from package google-chrome-stable-11.0.696.65-84435.i386 file /opt/google/chrome/libppGoogleNaClPluginChrome.so from install of google-chrome-stable-11.0.696.65-84435.x8...

    Read the article

  • CodePlex Daily Summary for Saturday, April 24, 2010

    CodePlex Daily Summary for Saturday, April 24, 2010New ProjectsAutoWorkLoad: Is an application intended to load hours to accounting system such as TimeTracker automatically.Chemistry Add-in for Word: The Chemistry Add-in for Word makes it easier for students, chemists, and researchers to insert and modify chemical information, such as labels, fo...Exceptional Visualizer: A Debugger Visualizer for VS 2008 that allows for effective visual tracing of an Exception stack. Useful for Unity Resolution Exceptions as seen i...FTE Owner Requirement: FIM 2010 Activity: Forefront Identity Manager 2010 (FIM) activity designed to ensure that group object has at least one assigned Full Time Employee owner. This policy...Globus CB: Group project 2009-2010Highlighterr for Visual C++ 2010: A simple code syntax highlighter to change the colors of classes, structs, interfaces, macros and typedefs in the Visual C++ 2010 IDE. It is implem...HTML to word (.doc): easy to export your HTML code to Microsoft Word (.doc extension)IETT Hat Güzergah Importer: http://www.iett.gov.tr sitesinden otobüs hat ve güzergahlarını indirerek RegEx ile parse eder. Elde ettiği verileri SQL Server'a kaydeder.Industrial Dashboard: WCF service that allows executing SQL Server stored procedures straight from javascript code, enabling sending and receiving structured data withou...iSafePDF: iSafePDF is a PDF protection software. it allows you to encrypt PDF document, signe them using a certificate and timestamp the signature. all those...Kordinat Dönüştürücü: * UTM Koordinatlardan DDD koordinatlara iki yönlü dönüşüm. * Google Earth üzerinde koordinat, polygon ve ruhsat gösterimi. * Türkiye Paftalarının...LinkedIn® for Windows Mobile: LinkedIn® for Windows Mobile brings your LinkedIn® account to your Window Mobile powered phone. See networkupdates / connections / profile etc. Macrosome: An F# project demonstrates recording and replaying user operations.Markov Text Generator: Markov Text Generator.MEFedMVVM: Library for building MEF MVVM applications for Silverlight and WPF. By using this library you can easily build MVVM application. *UNDER Constructi...Mercurial to Team Foundation Server Work Item Hook: This is a Mercurial hook that will mark Team Foundation Server work items as resolved with a specific format in the commit description.Metaball WPF HLSL: Metaballs in WPF 3 with pixel shaders.Project Audiophile: Project Audiophile is a suite of applications and libraries built for .Net and Mono for the purposes of listening and organising music.RSS Application Updater: A Libbrary that helps you to update your app from your web site's feed. works very good with drupal .Sherwood Content Management Suite: A project that aims to provide a powerful and flexible tool for aggregating data from different data sources. Add your own plugins to store wanted ...Sonic.Net: Sonic.Net is a .Net Library designed to facilitate development of rich client applications both in Silverlight and WPF. Sonic.Net makes use of all ...StoichiometriCS: Stoichiometric Chemical Equation Solver.Vate Game Engine: Vate is a new XNA Game Engine. For more information about this project, please visit http://blog.aphysoft.com.Yahoo OpenID YQL Demo: This is demo program how to use Yahoo OpenID and Yahoo Query Language (YQL)New ReleasesBasic Sprite Sheet Creator: Sprite Tool V1.11: I had a small error when using multiple animations without the one pixel border that I overlooked when rewriting the code. It should be completely ...Braintree Client Library: Braintree-2.0.0: Updated IsSuccess() on transaction results to return false on declined transactions Search results now implement IEnumerable and will automatical...BV Commerce 5 Import Export Tools: Version 5.7.0 (for BV Commerce 5.7): Updated version compatible with BV Commerce 5.7. Do not use on earlier versions.Chemistry Add-in for Word: Chemistry Add-in for Word Beta 2: This is the source code release of the Chemistry Add-in for Word Beta 2. System Requirements To run this software, you’ll need the following: Wind...Controlled Vocabulary: 1.0.0.5: System Requirements Outlook 2007 / 2010 .Net Framework 3.5 VSTO 2010 Runtime Installation 1. Close Outlook (Use Task Manager to ensure no running ...DotNetNuke® Store: 02.01.33 RC: What's New in this release? Bugs corrected: - Fixed a bug related to encryption cookie. New Features: - Adden token pair [IFLOGGED] [/IFLOGGED] us...EdiliOS: Beta 0.2.1: Aggiunto supporto a FidoCadJ, editor FidoCad multipiattaforma di Davide Bucci, con Libreria di Ingegneria Civile integrata.Event Scavenger: Admin tool Version 3.1.1: Fixed the Admin tool that fails on editing general settings. Only Admin tool is affected.Exceptional Visualizer: Exception Visualizer: A Debugger Visualizer to help with long chains of exceptions where digging through the inner exceptions is hard to do. Specifically, this release ...fracback: Binaries: Use at your own riskFree Silverlight & WPF Chart Control - Visifire: Visifire for SL 4 and WPF Charts 3.5.1 Released: Hi, This release contains fix for the following bug: Chart threw exception with DateTime axis if IntervalType property was set as ‘Minutes’ in Ax...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight and WPF Charts 3.0.8 Released: Hi, This release contains fix for the following bug: * Chart threw exception with DateTime axis if IntervalType property was set as ‘Minutes’...GeoUtility Library: GeoUtility Library 3.1.5.0: Please Note: This is an open source version. The commercial version offers much more functionality. Help files (english/german) are only available ...Highlighterr for Visual C++ 2010: Highlighterr for Visual C++ 2010 Test Release 1.0: To install the extension, download the and then double-click on the Highlighterr.vsix file. This should bring up a dialog saying something about wh...Highlighterr for Visual C++ 2010: Highlighterr for Visual C++ 2010 Test Release 1.01: The lack of support for /* */ comments was annoying me, so I added it. To install the extension, download the and then double-click on the Highlig...Home Access Plus+: v4.0.1.0: v4.0.1.0 Beta Change Log: Fixed an issue with laptops and the booking system (CSS and code fixes) Moved filters to top Added some Javascript to...HTML to word (.doc): FullSourceDownload: the full source contain: bin/AppWebdx7wusqu.dll Default.aspx htw.ascx htw.ascx.vb Web.configIndustrial Dashboard: 3.0 Beta: Added Example with Dojox.DataGrid Added Example with Ext.js ChartiSafePDF: iSafePDF v1.2: This is the first public release, this version support : PDF signature, timestamped signature, multi-signature, PDF encryption and meta-data modifi...linq.js - LINQ for JavaScript: ver 2.0.0.0: all code rewrite from scratch. enumerator support Dispose. namespace changed E, Linq.Enumerable -> Enumerable delete methods ToJSON ToTable Trace...LogikBug's IoC Container: Third Release: This project is dependent upon Microsoft.Practices.ServiceLocation and must be referenced when referencing LogikBug.Injection. Click here to view d...Macrosome: 0.0.1 preview: Key pointsOnly mouse clicks supported Just for preview: not stable How to useStart from Macrosome.Wpf.exe Click "Record" button will start oper...Mercurial to Team Foundation Server Work Item Hook: Version 0.1: This is the first version of the Mercurial to Team Foundation Server hook. It currently supports only adding comments to existing work items.MOSSDAL: MOSS Data Access Layer for data from the Sharepoint Lists Service: MOSSDAL Silverlight Framework Release 1: This is the first release of MOSSDAL for silverlight. For the MOSSDAL Framework for .NET release 1 click hereMOSSDAL: MOSS Data Access Layer for data from the Sharepoint Lists Service: MOSSDAL Silverlight Sample Release 1: This is the first release of the MOSSDAL framework samples for Silverlight. For the MOSSDAL .NET Release 1 Sample click hereMyWSAT - ASP.NET Membership Administration Tool: MyWSAT v3.5.1: MyWSAT 3.5.1 Update Notes - April 23rd 2010 1.) Fixed standard profile problem in web.config as well as on all the forms the profiles are used. The...NetPE: NetPE v1.0: Initial Release of NetPE. Features: -View & Editing Portable Executable -Hex editor -Full Metadata Support -Disassemble Cil/x86 codeNSIS Autorun: NSIS Autorun 0.1.1: NSIS Autorun 0.1.1 This release includes source code, application binary, and example materials.Over Store: OverStore Release 1.17.0.0: Version 1.17.0.0 - AdoNetStorage: AdoNetStorage refactored. Detailed Log messages added on each event. Database resource management moved to A...RoTwee: RoTwee (11.0.0.3): Fix for "17385 Remove saved degree val from code"Silverlight 4.0 Popup Menu: Popup Menu for Silverlight 4.0: This is the first project release. Added drop shadow and fade in effects. Left click and hover events are also supported.Silverlight 4.0 Popup Menu: Popup menu for Silverlight 4.0 Version 0.8: - Placed the invoker for the 'Opening' event handler within a dispatcher. This ensures that the visual tree is created before it is accessed.sNPCedit: sNPCedit v0.9: + Some changes in GUI and Behaviour + Added: Search functionSonic.Net: Sonic.Net v1.0.0: Sonic.Net v1.0.0 Targets Net 3.5 sp1 and Sinverlight 3 Includes: sonic.UnityConfiguration.Silverlight sonic.UnityConfiguration.WpfSurvey - web survey & form engine: Survey™ 1.2.1: Survey™ 1.2.1 release (based on the original Nsurvey 1.9.1. source files) New Features & fixes: 1. Final bits of code rewritten to become 100% ...SysPad: 4.10.10.2: Release Notes A folder management and scratchpad utility; especially useful in a business network setting that utilizes numerous, commonly used fol...Third Hand - Use your voice to control Visual Studio: Update for VS2010: Added support for VS2010, and minor improvements when using the grid.TiledLib: TiledLib 1.2: - Added overload of Map.Draw that specifies the area to draw - Added demo of a camera control for a mapXMLPreprocess: 2.0.12: What's new in this release: This release contains a number of enhancements based on feedback given through the discussion forums and issue tracker....Xrns2XMod: Xrns2Xmod 0.8: Added >> Real preliminary sound conversion for XM >> Some code optimizations Note Some samples might not be converted due to a flac parsing error ...Yahoo OpenID YQL Demo: Yahoo YQL .Net Demo: This is a demo program for using YQL with C#.netYahoo OpenID YQL Demo: YQL Demo: This is a demo program using Yahoo YQL with C#.NetYahoo OpenID YQL Demo: YQLDemo using .Net: This is a demo program for using Yahoo YQL with C#.NetMost Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitSilverlight ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrBlogEngine.NETParticle Plot PivotNB_Store - Free DotNetNuke Ecommerce Catalog ModuleDotNetZip LibraryGMap.NET - Great Maps for Windows Forms & Presentationturing machine simulatorIonics Isapi Rewrite Filterpatterns & practices: Composite WPF and Silverlight

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >