Search Results

Search found 18829 results on 754 pages for 'null terminated'.

Page 204/754 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • Why Is Faulty Behaviour In The .NET Framework Not Fixed?

    - by Alois Kraus
    Here is the scenario: You have a Windows Form Application that calls a method via Invoke or BeginInvoke which throws exceptions. Now you want to find out where the error did occur and how the method has been called. Here is the output we do get when we call Begin/EndInvoke or simply Invoke The actual code that was executed was like this:         private void cInvoke_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.Invoke);         }            [MethodImpl(MethodImplOptions.NoInlining)]         void InvokingFunction(CallMode mode)         {             switch (mode)             {                 case CallMode.Invoke:                     this.Invoke(new MethodInvoker(GenerateError));   The faulting method is called GenerateError which does throw a NotImplementedException exception and wraps it in a NotSupportedException.           [MethodImpl(MethodImplOptions.NoInlining)]         void GenerateError()         {             F1();         }           private void F1()         {             try             {                 F2();             }             catch (Exception ex)             {                 throw new NotSupportedException("Outer Exception", ex);             }         }           private void F2()         {            throw new NotImplementedException("Inner Exception");         } It is clear that the method F2 and F1 did actually throw these exceptions but we do not see them in the call stack. If we directly call the InvokingFunction and catch and print the exception we can find out very easily how we did get into this situation. We see methods F1,F2,GenerateError and InvokingFunction directly in the stack trace and we see that actually two exceptions did occur. Here is for comparison what we get from Invoke/EndInvoke System.NotImplementedException: Inner Exception     StackTrace:    at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)     at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)     at WindowsFormsApplication1.AppForm.InvokingFunction(CallMode mode)     at WindowsFormsApplication1.AppForm.cInvoke_Click(Object sender, EventArgs e)     at System.Windows.Forms.Control.OnClick(EventArgs e)     at System.Windows.Forms.Button.OnClick(EventArgs e) The exception message is kept but the stack starts running from our Invoke call and not from the faulting method F2. We have therefore no clue where this exception did occur! The stack starts running at the method MarshaledInvoke because the exception is rethrown with the throw catchedException which resets the stack trace. That is bad but things are even worse because if previously lets say 5 exceptions did occur .NET will return only the first (innermost) exception. That does mean that we do not only loose the original call stack but all other exceptions and all data contained therein as well. It is a pity that MS does know about this and simply closes this issue as not important. Programmers will play a lot more around with threads than before thanks to TPL, PLINQ that do come with .NET 4. Multithreading is hyped quit a lot in the press and everybody wants to use threads. But if the .NET Framework makes it nearly impossible to track down the easiest UI multithreading issue I have a problem with that. The problem has been reported but obviously not been solved. .NET 4 Beta 2 did not have changed that dreaded GetBaseException call in MarshaledInvoke to return only the innermost exception of the complete exception stack. It is really time to fix this. WPF on the other hand does the right thing and wraps the exceptions inside a TargetInvocationException which makes much more sense. But Not everybody uses WPF for its daily work and Windows forms applications will still be used for a long time. Below is the code to repro the issues shown and how the exceptions can be rendered in a meaningful way. The default Exception.ToString implementation generates a hard to interpret stack if several nested exceptions did occur. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; using System.Globalization; using System.Runtime.CompilerServices;   namespace WindowsFormsApplication1 {     public partial class AppForm : Form     {         enum CallMode         {             Direct = 0,             BeginInvoke = 1,             Invoke = 2         };           public AppForm()         {             InitializeComponent();             Thread.CurrentThread.CurrentUICulture = CultureInfo.InvariantCulture;             Application.ThreadException += new System.Threading.ThreadExceptionEventHandler(Application_ThreadException);         }           void Application_ThreadException(object sender, System.Threading.ThreadExceptionEventArgs e)         {             cOutput.Text = PrintException(e.Exception, 0, null).ToString();         }           private void cDirectUnhandled_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.Direct);         }           private void cDirectCall_Click(object sender, EventArgs e)         {             try             {                 InvokingFunction(CallMode.Direct);             }             catch (Exception ex)             {                 cOutput.Text = PrintException(ex, 0, null).ToString();             }         }           private void cInvoke_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.Invoke);         }           private void cBeginInvokeCall_Click(object sender, EventArgs e)         {             InvokingFunction(CallMode.BeginInvoke);         }           [MethodImpl(MethodImplOptions.NoInlining)]         void InvokingFunction(CallMode mode)         {             switch (mode)             {                 case CallMode.Direct:                     GenerateError();                     break;                 case CallMode.Invoke:                     this.Invoke(new MethodInvoker(GenerateError));                     break;                 case CallMode.BeginInvoke:                     IAsyncResult res = this.BeginInvoke(new MethodInvoker(GenerateError));                     this.EndInvoke(res);                     break;             }         }           [MethodImpl(MethodImplOptions.NoInlining)]         void GenerateError()         {             F1();         }           private void F1()         {             try             {                 F2();             }             catch (Exception ex)             {                 throw new NotSupportedException("Outer Exception", ex);             }         }           private void F2()         {            throw new NotImplementedException("Inner Exception");         }           StringBuilder PrintException(Exception ex, int identLevel, StringBuilder sb)         {             StringBuilder builtStr = sb;             if( builtStr == null )                 builtStr = new StringBuilder();               if( ex == null )                 return builtStr;                 WriteLine(builtStr, String.Format("{0}: {1}", ex.GetType().FullName, ex.Message), identLevel);             WriteLine(builtStr, String.Format("StackTrace: {0}", ShortenStack(ex.StackTrace)), identLevel + 1);             builtStr.AppendLine();               return PrintException(ex.InnerException, ++identLevel, builtStr);         }               void WriteLine(StringBuilder sb, string msg, int identLevel)         {             foreach (string trimmedLine in SplitToLines(msg)                                            .Select( (line) => line.Trim()) )             {                 for (int i = 0; i < identLevel; i++)                     sb.Append('\t');                 sb.Append(trimmedLine);                 sb.AppendLine();             }         }           string ShortenStack(string stack)         {             int nonAppFrames = 0;             // Skip stack frames not part of our app but include two foreign frames and skip the rest             // If our stack frame is encountered reset counter to 0             return SplitToLines(stack)                               .Where((line) =>                               {                                   nonAppFrames = line.Contains("WindowsFormsApplication1") ? 0 : nonAppFrames + 1;                                   return nonAppFrames < 3;                               })                              .Select((line) => line)                              .Aggregate("", (current, line) => current + line + Environment.NewLine);         }           static char[] NewLines = Environment.NewLine.ToCharArray();         string[] SplitToLines(string str)         {             return str.Split(NewLines, StringSplitOptions.RemoveEmptyEntries);         }     } }

    Read the article

  • CLR Version issues with CorBindRuntimeEx

    - by Rick Strahl
    I’m working on an older FoxPro application that’s using .NET Interop and this app loads its own copy of the .NET runtime through some of our own tools (wwDotNetBridge). This all works fine and it’s fairly straightforward to load and host the runtime and then make calls against it. I’m writing this up for myself mostly because I’ve been bitten by these issues repeatedly and spend 15 minutes each However, things get tricky when calling specific versions of the .NET runtime since .NET 4.0 has shipped. Basically we need to be able to support both .NET 2.0 and 4.0 and we’re currently doing it with the same assembly – a .NET 2.0 assembly that is the AppDomain entry point. This works as .NET 4.0 can easily host .NET 2.0 assemblies and the functionality in the 2.0 assembly provides all the features we need to call .NET 4.0 assemblies via Reflection. In wwDotnetBridge we provide a load flag that allows specification of the runtime version to use. Something like this: do wwDotNetBridge LOCAL loBridge as wwDotNetBridge loBridge = CreateObject("wwDotNetBridge","v4.0.30319") and this works just fine in most cases.  If I specify V4 internally that gets fixed up to a whole version number like “v4.0.30319” which is then actually used to host the .NET runtime. Specifically the ClrVersion setting is handled in this Win32 DLL code that handles loading the runtime for me: /// Starts up the CLR and creates a Default AppDomain DWORD WINAPI ClrLoad(char *ErrorMessage, DWORD *dwErrorSize) { if (spDefAppDomain) return 1; //Retrieve a pointer to the ICorRuntimeHost interface HRESULT hr = CorBindToRuntimeEx( ClrVersion, //Retrieve latest version by default L"wks", //Request a WorkStation build of the CLR STARTUP_LOADER_OPTIMIZATION_MULTI_DOMAIN | STARTUP_CONCURRENT_GC, CLSID_CorRuntimeHost, IID_ICorRuntimeHost, (void**)&spRuntimeHost ); if (FAILED(hr)) { *dwErrorSize = SetError(hr,ErrorMessage); return hr; } //Start the CLR hr = spRuntimeHost->Start(); if (FAILED(hr)) return hr; CComPtr<IUnknown> pUnk; WCHAR domainId[50]; swprintf(domainId,L"%s_%i",L"wwDotNetBridge",GetTickCount()); hr = spRuntimeHost->CreateDomain(domainId,NULL,&pUnk); hr = pUnk->QueryInterface(&spDefAppDomain.p); if (FAILED(hr)) return hr; return 1; } CorBindToRuntimeEx allows for a specific .NET version string to be supplied which is what I’m doing via an API call from the FoxPro code. The behavior of CorBindToRuntimeEx is a bit finicky however. The documentation states that NULL should load the latest version of the .NET runtime available on the machine – but it actually doesn’t. As far as I can see – regardless of runtime overrides even in the .config file – NULL will always load .NET 2.0 even if 4.0 is installed. <supportedRuntime> .config File Settings Things get even more unpredictable once you start adding runtime overrides into the application’s .config file. In my scenario working inside of Visual FoxPro this would be VFP9.exe.config in the FoxPro installation folder (not the current folder). If I have a specific runtime override in the .config file like this: <?xml version="1.0"?> <configuration> <startup> <supportedRuntime version="v2.0.50727" /> </startup> </configuration> Not surprisingly with this I can load a .NET 2.0  runtime, but I will not be able to load Version 4.0 of the .NET runtime even if I explicitly specify it in my call to ClrLoad. Worse I don’t get an error – it will just go ahead and hand me a V2 version of the runtime and assume that’s what I wanted. Yuck! However, if I set the supported runtime to V4 in the .config file: <?xml version="1.0"?> <configuration> <startup> <supportedRuntime version="v4.0.30319" /> </startup> </configuration> Then I can load both V4 and V2 of the runtime. Specifying NULL however will STILL only give me V2 of the runtime. Again this seems pretty inconsistent. If you’re hosting runtimes make sure you check which version of the runtime is actually loading first to ensure you get the one you’re looking for. If the wrong version loads – say 2.0 and you want 4.0 - and you then proceed to load 4.0 assemblies they will all fail to load due to version mismatches. This is how all of this started – I had a bunch of assemblies that weren’t loading and it took a while to figure out that the host was running the wrong version of the CLR and therefore caused the assemblies loading to fail. Arrggh! <supportedRuntime> and Debugger Version <supportedRuntime> also affects the use of the .NET debugger when attached to the target application. Whichever runtime is specified in the key is the version of the debugger that fires up. This can have some interesting side effects. If you load a .NET 2.0 assembly but <supportedRuntime> points at V4.0 (or vice versa) the debugger will never fire because it can only debug in the appropriate runtime version. This has bitten me on several occasions where code runs just fine but the debugger will just breeze by breakpoints without notice. The default version for the debugger is the latest version installed on the system if <supportedRuntime> is not set. Summary Besides all the hassels, I’m thankful I can build a .NET 2.0 assembly and have it host .NET 4.0 and call .NET 4.0 code. This way we’re able to ship a single assembly that provides functionality that supports both .NET 2 and 4 without having to have separate DLLs for both which would be a deployment and update nightmare. The MSDN documentation does point at newer hosting API’s specifically for .NET 4.0 which are way more complicated and even less documented but that doesn’t help here because the runtime needs to be able to host both .NET 4.0 and 2.0. Not pleased about that – the new APIs look way more complex and of course they’re not available with older versions of the runtime installed which in our case makes them useless to me in this scenario where I have to support .NET 2.0 hosting (to provide greater ‘built-in’ platform support). Once you know the behavior above, it’s manageable. However, it’s quite easy to get tripped up here because there are multiple combinations that can really screw up behaviors.© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  FoxPro  

    Read the article

  • force close when assign onclick to button

    - by Lynnooi
    hi, i am very new in android development as well as in java. i had developed an application that gets an image url from a site and wanted to download it into the device and later on i would like to enable users to set it as wallpapers. however, i am met a problem when assigning onclick event to a button. Once i uncomment the line in red, it will pop up a box stating that the application was stopped unexpectedly. Can someone please help me with this? private ImageView imView = null; public void onCreate(Bundle icicle) { super.onCreate(icicle); setContentView(R.layout.main); try { /* Create a URL we want to load some xml-data from. */ URL url = new URL(xmlURL); /* Get a SAXParser from the SAXPArserFactory. */ SAXParserFactory spf = SAXParserFactory.newInstance(); SAXParser sp = spf.newSAXParser(); /* Get the XMLReader of the SAXParser we created. */ XMLReader xr = sp.getXMLReader(); /* Create a new ContentHandler and apply it to the XML-Reader */ ExampleHandler myExampleHandler = new ExampleHandler(); xr.setContentHandler(myExampleHandler); /* Parse the xml-data from our URL. */ xr.parse(new InputSource(url.openStream())); /* Parsing has finished. */ /* Our ExampleHandler now provides the parsed data to us. */ ParsedExampleDataSet parsedExampleDataSet = myExampleHandler .getParsedData(); /* Set the result to be displayed in our GUI. */ if (myExampleHandler.filenames != null) { a = a + "\n" + myExampleHandler.filenames + ", by " + myExampleHandler.authors + "\nhits: " + myExampleHandler.hits + " downloads"; this.ed = myExampleHandler.thumbs; this.imageURL = myExampleHandler.mediafiles; } } catch (Exception e) { a = e.getMessage(); } // get thumbnail Context context = this.getBaseContext(); if (ed.length() != 0) { Drawable image = ImageOperations(context, this.ed, "image.jpg"); ImageView imgView = new ImageView(context); imgView = (ImageView) findViewById(R.id.image1); imgView.setImageDrawable(image); } TextView tv = (TextView) findViewById(R.id.txt_name); tv.setText(a); Button bt3 = (Button) findViewById(R.id.get_imagebt); //bt3.setOnClickListener(getImageBtnOnClick); } OnClickListener getImageBtnOnClick = new OnClickListener() { public void onClick(View view) { downloadFile(imageURL); } }; void downloadFile(String fileUrl) { URL myFileUrl = null; try { myFileUrl = new URL(fileUrl); } catch (MalformedURLException e) { // TODO Auto-generated catch block e.printStackTrace(); } try { HttpURLConnection conn = (HttpURLConnection) myFileUrl .openConnection(); conn.setDoInput(true); conn.connect(); int length = conn.getContentLength(); InputStream is = conn.getInputStream(); bmImg = BitmapFactory.decodeStream(is); // this.imView.setImageBitmap(bmImg); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } private Drawable ImageOperations(Context ctx, String url, String saveFilename) { try { InputStream is = (InputStream) this.fetch(url); Drawable d = Drawable.createFromStream(is, "src"); return d; } catch (MalformedURLException e) { e.printStackTrace(); return null; } catch (IOException e) { e.printStackTrace(); return null; } } public Object fetch(String address) throws MalformedURLException, IOException { URL url = new URL(address); Object content = url.getContent(); return content; } Main.xml <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" android:id="@+id/viewgroup"> <ImageView android:id="@+id/image1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="center" /> <ImageView android:id="@+id/image2" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="center" /> <TextView android:id="@+id/txt_name" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="center_horizontal" /> <Button id="@+id/get_imagebt" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="xxx Get an image" android:layout_gravity="center" /> <ImageView id="@+id/imview" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_gravity="center" /> </LinearLayout>

    Read the article

  • java.sql.SQLException: Operation not allowed after ResultSet closed

    - by javatraniee
    Why am I getting an Resultset already closed error? public class Server implements Runnable { private static int port = 1600, maxConnections = 0; public static Connection connnew = null; public static Connection connnew1 = null; public static Statement stnew, stnew1, stnew2, stnew3, stnew4; public void getConnection() { try { Class.forName("org.gjt.mm.mysql.Driver"); connnew = DriverManager.getConnection("jdbc:mysql://localhost/db_alldata", "root", "flashkit"); connnew1 = DriverManager.getConnection("jdbc:mysql://localhost/db_main", "root", "flashkit"); stnew = connnew.createStatement(); stnew1 = connnew.createStatement(); stnew2 = connnew1.createStatement(); stnew3 = connnew1.createStatement(); stnew4 = connnew1.createStatement(); } catch (Exception e) { System.out.print("Get Connection Exception---" + new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date()) + "----- > " + e); } } public void closeConnection() { try { if (!(connnew.isClosed())) { stnew.close(); stnew1.close(); connnew.close(); } if (!(connnew1.isClosed())) { stnew2.close(); stnew3.close(); stnew4.close(); connnew1.close(); } } catch (Exception e) { System.out.print("Close Connection Closing Exception-----" + new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date()) + "------->" + e); } } Server() { try { } catch (Exception ee) { System.out.print("Server Exceptions in main connection--" + new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date()) + "------>" + ee); } } public static void main(String[] args) throws SQLException { int i = 0; Server STUD = new Server(); STUD.getConnection(); try { ServerSocket listener = new ServerSocket(port); Socket server; while ((i++ < maxConnections) || (maxConnections == 0)) { @SuppressWarnings("unused") doComms connection; server = listener.accept(); try { ResultSet checkconnection = stnew4 .executeQuery("select count(*) from t_studentdetails"); if (checkconnection.next()) { // DO NOTHING IF EXCEPTION THEN CLOSE ALL CONNECTIONS AND OPEN NEW // CONNECTIONS } } catch (Exception e) { System.out.print("Db Connection Lost Closing And Re-Opning It--------" + new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date()) + "--------" + e); STUD.closeConnection(); STUD.getConnection(); } doComms conn_c = new doComms(server, stnew, stnew1, stnew2, stnew3); Thread t = new Thread(conn_c); t.start(); } } catch (IOException ioe) { System.out.println("Main IOException on socket listen: " + ioe); } } public void run() { } } class doComms implements Runnable { private Socket server; private String input; static Connection conn = null; static Connection conn1 = null; static Statement st, st1, st2, st3; doComms(Socket server, Statement st, Statement st1, Statement st2, Statement st3) { this.server = server; doComms.st = st; doComms.st1 = st1; doComms.st2 = st2; doComms.st3 = st3; } @SuppressWarnings("deprecation") public void run() { input = ""; // char ch; try { DataInputStream in = new DataInputStream(server.getInputStream()); OutputStreamWriter outgoing = new OutputStreamWriter(server.getOutputStream()); while (!(null == (input = in.readLine()))) { savetodatabase(input, server.getPort(), outgoing); } } catch (IOException ioe) { System.out.println("RUN IOException on socket listen:-------" + new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date()) + "----- " + ioe); ioe.printStackTrace(); } } public void savetodatabase(String line, int port1, OutputStreamWriter outgoing) { try { String Rollno = "-", name = "-", div = "-", storeddate = "-", storedtime = "-", mailfrom = ""; String newline = line; String unitid = "-"; storeddate = new SimpleDateFormat("yyyy-MM-dd").format(new java.util.Date()); storedtime = new SimpleDateFormat("HH:mm:ss").format(new java.util.Date()); String sql2 = "delete from t_currentport where PortNumber='" + port1 + "''"; st2.executeUpdate(sql2); sql2 = "insert into t_currentport (unitid, portnumber,thedate,thetime) values >('" + unitid + "','" + port1 + "','" + storeddate + "','" + storedtime + "')"; st2.executeUpdate(sql2); String tablename = GetTable(); String sql = "select * from t_studentdetails where Unitid='" + unitid + "'"; ResultSet rst = st2.executeQuery(sql); if (rst.next()) { Rollno = rst.getString("Rollno"); name = rst.getString("name"); div = rst.getString("div"); } String sql1 = "insert into studentInfo StoredDate,StoredTime,Subject,UnitId,Body,Status,Rollno,div,VehId,MailDate,MailTime,MailFrom,MailTo,Header,UnProcessedStamps) values('" + storeddate + "','" + storedtime + "','" + unitid + "','" + unitid + "','" + newline + "','Pending','" + Rollno + "','" + div + "','" + name + "','" + storeddate + "','" + storedtime + "','" + mailfrom + "','" + mailfrom + "','-','-')"; st1.executeUpdate(sql1); } catch (Exception e) { System.out.print("Save to db Connection Exception--" + new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date()) + "-->" + e); } } }

    Read the article

  • Using Sitecore RenderingContext Parameters as MVC controller action arguments

    - by Kyle Burns
    I have been working with the Technical Preview of Sitecore 6.6 on a project and have been for the most part happy with the way that Sitecore (which truly is an MVC implementation unto itself) has been expanded to support ASP.NET MVC. That said, getting up to speed with the combined platform has not been entirely without stumbles and today I want to share one area where Sitecore could have really made things shine from the "it just works" perspective. A couple days ago I was asked by a colleague about the usage of the "Parameters" field that is defined on Sitecore's Controller Rendering data template. Based on the standard way that Sitecore handles a field named Parameters, I was able to deduce that the field expected key/value pairs separated by the "&" character, but beyond that I wasn't sure and didn't see anything from a documentation perspective to guide me, so it was time to dig and find out where the data in the field was made available. My first thought was that it would be really nice if Sitecore handled the parameters in this field consistently with the way that ASP.NET MVC handles the various parameter collections on the HttpRequest object and automatically maps them to parameters of the action method executing. Being the hopeful sort, I configured a name/value pair on one of my renderings, added a parameter with matching name to the controller action and fired up the bugger to see... that the parameter was not populated. Having established that the field's value was not going to be presented to me the way that I had hoped it would, the next assumption that I would work on was that Sitecore would handle this field similar to how they handle other similar data and would plug it into some ambient object that I could reference from within the controller method. After a considerable amount of guessing, testing, and cracking code open with Redgate's Reflector (a must-have companion to Sitecore documentation), I found that the most direct way to access the parameter was through the ambient RenderingContext object using code similar to: string myArgument = string.Empty; var rc = Sitecore.Mvc.Presentation.RenderingContext.CurrentOrNull; if (rc != null) {     var parms = rc.Rendering.Parameters;     myArgument = parms["myArgument"]; } At this point, we know how this field is used out of the box from Sitecore and can provide information from Sitecore's Content Editor that will be available when the controller action is executing, but it feels a little dirty. In order to properly test the action method I would have to do a lot of setup work and possible use an isolation framework such as Pex and Moles to get at a value that my action method is dependent upon. Notice I said that my method is dependent upon the value but in order to meet that dependency I've accepted another dependency upon Sitecore's RenderingContext.  I'm a big believer in, when possible, ensuring that any piece of code explicitly advertises dependencies using the method signature, so I found myself still wanting this to work the same as if the parameters were in the request route, querystring, or form by being able to add a myArgument parameter to the action method and have this parameter populated by the framework. Lucky for us, the ASP.NET MVC framework is extremely flexible and provides some easy to grok and use extensibility points. ASP.NET MVC is able to provide information from the request as input parameters to controller actions because it uses objects which implement an interface called IValueProvider and have been registered to service the application. The most basic statement of responsibility for an IValueProvider implementation is "I know about some data which is indexed by key. If you hand me the key for a piece of data that I know about I give you that data". When preparing to invoke a controller action, the framework queries registered IValueProvider implementations with the name of each method argument to see if the ValueProvider can supply a value for the parameter. (the rest of this post will assume you're working along and make a lot more sense if you do) Let's pull Sitecore out of the equation for a second to simplify things and create an extremely simple IValueProvider implementation. For this example, I first create a new ASP.NET MVC3 project in Visual Studio, selecting "Internet Application" and otherwise taking defaults (I'm assuming that anyone reading this far in the post either already knows how to do this or will need to take a quick run through one of the many available basic MVC tutorials such as the MVC Music Store). Once the new project is created, go to the Index action of HomeController.  This action sets a Message property on the ViewBag to "Welcome to ASP.NET MVC!" and invokes the View, which has been coded to display the Message. For our example, we will remove the hard coded message from this controller (although we'll leave it just as hard coded somewhere else - this is sample code). For the first step in our exercise, add a string parameter to the Index action method called welcomeMessage and use the value of this argument to set the ViewBag.Message property. The updated Index action should look like: public ActionResult Index(string welcomeMessage) {     ViewBag.Message = welcomeMessage;     return View(); } This represents the entirety of the change that you will make to either the controller or view.  If you run the application now, the home page will display and no message will be presented to the user because no value was supplied to the Action method. Let's now write a ValueProvider to ensure this parameter gets populated. We'll start by creating a new class called StaticValueProvider. When the class is created, we'll update the using statements to ensure that they include the following: using System.Collections.Specialized; using System.Globalization; using System.Web.Mvc; With the appropriate using statements in place, we'll update the StaticValueProvider class to implement the IValueProvider interface. The System.Web.Mvc library already contains a pretty flexible dictionary-like implementation called NameValueCollectionValueProvider, so we'll just wrap that and let it do most of the real work for us. The completed class looks like: public class StaticValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider;     public StaticValueProvider(ControllerContext controllerContext)     {         var parameters = new NameValueCollection();         parameters.Add("welcomeMessage", "Hello from the value provider!");         _wrappedProvider = new NameValueCollectionValueProvider(parameters, CultureInfo.InvariantCulture);     }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } Notice that the only entry in the collection matches the name of the argument to our HomeController's Index action.  This is the important "secret sauce" that will make things work. We've got our new value provider now, but that's not quite enough to be finished. Mvc obtains IValueProvider instances using factories that are registered when the application starts up. These factories extend the abstract ValueProviderFactory class by initializing and returning the appropriate implementation of IValueProvider from the GetValueProvider method. While I wouldn't do so in production code, for the sake of this example, I'm going to add the following class definition within the StaticValueProvider.cs source file: public class StaticValueProviderFactory : ValueProviderFactory {     public override IValueProvider GetValueProvider(ControllerContext controllerContext)     {         return new StaticValueProvider(controllerContext);     } } Now that we have a factory, we can register it by adding the following line to the end of the Application_Start method in Global.asax.cs: ValueProviderFactories.Factories.Add(new StaticValueProviderFactory()); If you've done everything right to this point, you should be able to run the application and be presented with the home page reading "Hello from the value provider!". Now that you have the basics of the IValueProvider down, you have everything you need to enhance your Sitecore MVC implementation by adding an IValueProvider that exposes values from the ambient RenderingContext's Parameters property. I'll provide the code for the IValueProvider implementation (which should look VERY familiar) and you can use the work we've already done as a reference to create and register the factory: public class RenderingContextValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider = null;     public RenderingContextValueProvider(ControllerContext controllerContext)     {         var collection = new NameValueCollection();         var rc = RenderingContext.CurrentOrNull;         if (rc != null && rc.Rendering != null)         {             foreach(var parameter in rc.Rendering.Parameters)             {                 collection.Add(parameter.Key, parameter.Value);             }         }         _wrappedProvider = new NameValueCollectionValueProvider(collection, CultureInfo.InvariantCulture);         }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } In this post I've discussed the MVC IValueProvider used to map data to controller action method arguments and how this can be integrated into your Sitecore 6.6 MVC solution.

    Read the article

  • Passing data between android ListActivities in Java

    - by Will Janes
    I am new to Android! I am having a problem getting this code to work... Basically I Go from one list activity to another and pass the text from a list item through the intent of the activity to the new list view, then retrieve that text in the new list activity and then preform a http request based on value of that list item. Log Cat 04-05 17:47:32.370: E/AndroidRuntime(30135): FATAL EXCEPTION: main 04-05 17:47:32.370: E/AndroidRuntime(30135): java.lang.ClassCastException:android.widget.LinearLayout 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.thickcrustdesigns.ufood.CatogPage$1.onItemClick(CatogPage.java:66) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.AdapterView.performItemClick(AdapterView.java:284) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.ListView.performItemClick(ListView.java:3731) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.AbsListView$PerformClick.run(AbsListView.java:1959) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Handler.handleCallback(Handler.java:587) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Handler.dispatchMessage(Handler.java:92) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Looper.loop(Looper.java:130) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.app.ActivityThread.main(ActivityThread.java:3691) 04-05 17:47:32.370: E/AndroidRuntime(30135): at java.lang.reflect.Method.invokeNative(Native Method) 04-05 17:47:32.370: E/AndroidRuntime(30135): at java.lang.reflect.Method.invoke(Method.java:507) 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:907) 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:665) 04-05 17:47:32.370: E/AndroidRuntime(30135): at dalvik.system.NativeStart.main(Native Method) ListActivity 1 package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemClickListener; import android.widget.Button; import android.widget.ListView; import android.widget.TextView; public class CatogPage extends ListActivity { ListView listView1; Button btn_bk; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.definition_main); btn_bk = (Button) findViewById(R.id.btn_bk); listView1 = (ListView) findViewById(android.R.id.list); ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "categories")); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); ListView lv = getListView(); lv.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> parent, View view, int position, long id) { TextView tv = (TextView) view; String p = tv.getText().toString(); Intent i = new Intent(getApplicationContext(), Results.class); i.putExtra("category", p); startActivity(i); } }); btn_bk.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { Intent i = new Intent(getApplicationContext(), UFoodAppActivity.class); startActivity(i); } }); } } **ListActivity 2** package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.os.Bundle; import android.widget.ListView; public class Results extends ListActivity { ListView listView1; enum Category { Chicken, Beef, Chinese, Cocktails, Curry, Deserts, Fish, ForOne { public String toString() { return "For One"; } }, Lamb, LightBites { public String toString() { return "Light Bites"; } }, Pasta, Pork, Vegetarian } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); this.setContentView(R.layout.definition_main); listView1 = (ListView) findViewById(android.R.id.list); Bundle data = getIntent().getExtras(); String category = data.getString("category"); Category cat = Category.valueOf(category); String value = null; switch (cat) { case Chicken: value = "Chicken"; break; case Beef: value = "Beef"; break; case Chinese: value = "Chinese"; break; case Cocktails: value = "Cocktails"; break; case Curry: value = "Curry"; break; case Deserts: value = "Deserts"; break; case Fish: value = "Fish"; break; case ForOne: value = "ForOne"; break; case Lamb: value = "Lamb"; break; case LightBites: value = "LightBites"; break; case Pasta: value = "Pasta"; break; case Pork: value = "Pork"; break; case Vegetarian: value = "Vegetarian"; } ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "category")); nvp.add(new BasicNameValuePair("cat", value)); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); } } Request package com.thickcrustdesigns.ufood; import java.io.BufferedReader; import java.io.InputStream; import java.io.InputStreamReader; import java.util.ArrayList; import org.apache.http.HttpEntity; import org.apache.http.HttpResponse; import org.apache.http.NameValuePair; import org.apache.http.client.HttpClient; import org.apache.http.client.entity.UrlEncodedFormEntity; import org.apache.http.client.methods.HttpPost; import org.apache.http.impl.client.DefaultHttpClient; import org.json.JSONArray; import org.json.JSONObject; import android.content.Context; import android.util.Log; import android.widget.Toast; public class Request { @SuppressWarnings("null") public static ArrayList<JSONObject> fetchData(Context context, ArrayList<NameValuePair> nvp) { ArrayList<JSONObject> listItems = new ArrayList<JSONObject>(); InputStream is = null; try { HttpClient httpclient = new DefaultHttpClient(); HttpPost httppost = new HttpPost( "http://co350-11d.projects02.glos.ac.uk/php/database.php"); httppost.setEntity(new UrlEncodedFormEntity(nvp)); HttpResponse response = httpclient.execute(httppost); HttpEntity entity = response.getEntity(); is = entity.getContent(); } catch (Exception e) { Log.e("log_tag", "Error in http connection" + e.toString()); } // convert response to string String result = ""; try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); InputStream stream = null; StringBuilder sb = null; while ((result = reader.readLine()) != null) { sb.append(result + "\n"); } stream.close(); result = sb.toString(); } catch (Exception e) { Log.e("log_tag", "Error converting result " + e.toString()); } try { JSONArray jArray = new JSONArray(result); for (int i = 0; i < jArray.length(); i++) { JSONObject jo = jArray.getJSONObject(i); listItems.add(jo); } } catch (Exception e) { Toast.makeText(context.getApplicationContext(), "None Found!", Toast.LENGTH_LONG).show(); } return listItems; } } Any help would be grateful! Many Thanks EDIT Sorry very tired so missed out my 2nd ListActivity package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.os.Bundle; import android.widget.ListView; public class Results extends ListActivity { ListView listView1; enum Category { Chicken, Beef, Chinese, Cocktails, Curry, Deserts, Fish, ForOne { public String toString() { return "For One"; } }, Lamb, LightBites { public String toString() { return "Light Bites"; } }, Pasta, Pork, Vegetarian } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); this.setContentView(R.layout.definition_main); listView1 = (ListView) findViewById(android.R.id.list); Bundle data = getIntent().getExtras(); String category = data.getString("category"); Category cat = Category.valueOf(category); String value = null; switch (cat) { case Chicken: value = "Chicken"; break; case Beef: value = "Beef"; break; case Chinese: value = "Chinese"; break; case Cocktails: value = "Cocktails"; break; case Curry: value = "Curry"; break; case Deserts: value = "Deserts"; break; case Fish: value = "Fish"; break; case ForOne: value = "ForOne"; break; case Lamb: value = "Lamb"; break; case LightBites: value = "LightBites"; break; case Pasta: value = "Pasta"; break; case Pork: value = "Pork"; break; case Vegetarian: value = "Vegetarian"; } ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "category")); nvp.add(new BasicNameValuePair("cat", value)); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); } } Sorry again! Cheers guys!

    Read the article

  • Doctrine_Table_Exception: Unknown relation alias shoesTable in /home/sadiqsof/public_html/projects/g

    - by Sadiqur Rahman
    I am getting following error message: Doctrine_Table_Exception: Unknown relation alias shoesTable in /home/sadiqsof/public_html/projects/giftshoes/system/database/doctrine/Doctrine/Relation/Parser.php on line 237 My Code is below: ------------BaseShoe------------ <?php // Connection Component Binding Doctrine_Manager::getInstance()->bindComponent('Shoes', 'sadiqsof_giftshoes'); /** * BaseShoes * * This class has been auto-generated by the Doctrine ORM Framework * * @property integer $sku * @property string $name * @property string $keywords * @property string $description * @property string $manufacturer * @property float $sale_price * @property float $price * @property string $url * @property string $image * @property string $category * @property Doctrine_Collection $Viewes * * @package ##PACKAGE## * @subpackage ##SUBPACKAGE## * @author ##NAME## <##EMAIL##> * @version SVN: $Id: Builder.php 6820 2009-11-30 17:27:49Z jwage $ */ abstract class BaseShoes extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('shoes'); $this->hasColumn('sku', 'integer', 4, array( 'type' => 'integer', 'fixed' => 0, 'unsigned' => false, 'primary' => true, 'autoincrement' => false, 'length' => '4', )); $this->hasColumn('name', 'string', 255, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '255', )); $this->hasColumn('keywords', 'string', 255, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '255', )); $this->hasColumn('description', 'string', null, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('manufacturer', 'string', 20, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '20', )); $this->hasColumn('sale_price', 'float', null, array( 'type' => 'float', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('price', 'float', null, array( 'type' => 'float', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('url', 'string', null, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('image', 'string', null, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('category', 'string', 50, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '50', )); } public function setUp() { parent::setUp(); $this->hasMany('Viewes', array( 'local' => 'sku', 'foreign' => 'sku')); } } --------------ShoesTable-------- <?php class ShoesTable extends Doctrine_Table { function getAllShoes($from = 0, $total = 15) { $q = Doctrine_Query::create() ->from('Shoes') ->limit($total) ->offset($from); return $q->execute(array(), Doctrine::HYDRATE_ARRAY); } } ---------------Shoes Model----------------- <?php /** * Shoes * * This class has been auto-generated by the Doctrine ORM Framework * * @package ##PACKAGE## * @subpackage ##SUBPACKAGE## * @author ##NAME## <##EMAIL##> * @version SVN: $Id: Builder.php 6820 2009-11-30 17:27:49Z jwage $ */ class Shoes extends BaseShoes { function __construct() { parent::__construct(); $this->shoesTable = Doctrine::getTable('Shoes'); } function getAllShoes() { return $this->shoesTable->getAllShoes(); } }

    Read the article

  • Retrieving a list of eBay categories using the .NET SDK and GetCategoriesCall

    - by Bill Osuch
    eBay offers a .Net SDK for its Trading API - this post will show you the basics of making an API call and retrieving a list of current categories. You'll need the category ID(s) for any apps that post or search eBay. To start, download the latest SDK from https://www.x.com/developers/ebay/documentation-tools/sdks/dotnet and create a new console app project. Add a reference to the eBay.Service DLL, and a few using statements: using eBay.Service.Call; using eBay.Service.Core.Sdk; using eBay.Service.Core.Soap; I'm assuming at this point you've already joined the eBay Developer Network and gotten your app IDs and user tokens. If not: Join the developer program Generate tokens Next, add an app.config file that looks like this: <?xml version="1.0"?> <configuration>   <appSettings>     <add key="Environment.ApiServerUrl" value="https://api.ebay.com/wsapi"/>     <add key="UserAccount.ApiToken" value="YourBigLongToken"/>   </appSettings> </configuration> And then add the code to get the xml list of categories: ApiContext apiContext = GetApiContext(); GetCategoriesCall apiCall = new GetCategoriesCall(apiContext); apiCall.CategorySiteID = "0"; //Leave this commented out to retrieve all category levels (all the way down): //apiCall.LevelLimit = 4; //Uncomment this to begin at a specific parent category: //StringCollection parentCategories = new StringCollection(); //parentCategories.Add("63"); //apiCall.CategoryParent = parentCategories; apiCall.DetailLevelList.Add(DetailLevelCodeType.ReturnAll); CategoryTypeCollection cats = apiCall.GetCategories(); using (StreamWriter outfile = new StreamWriter(@"C:\Temp\EbayCategories.xml")) {    outfile.Write(apiCall.SoapResponse); } GetApiContext() (provided in the sample apps in the SDK) is required for any call:         static ApiContext GetApiContext()         {             //apiContext is a singleton,             //to avoid duplicate configuration reading             if (apiContext != null)             {                 return apiContext;             }             else             {                 apiContext = new ApiContext();                 //set Api Server Url                 apiContext.SoapApiServerUrl = ConfigurationManager.AppSettings["Environment.ApiServerUrl"];                 //set Api Token to access eBay Api Server                 ApiCredential apiCredential = new ApiCredential();                 apiCredential.eBayToken = ConfigurationManager.AppSettings["UserAccount.ApiToken"];                 apiContext.ApiCredential = apiCredential;                 //set eBay Site target to US                 apiContext.Site = SiteCodeType.US;                 return apiContext;             }         } Running this will give you a large (4 or 5 megs) XML file that looks something like this: <soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">    <soapenv:Body>       <GetCategoriesResponse >          <Timestamp>2012-06-06T16:03:46.158Z</Timestamp>          <Ack>Success</Ack>          <CorrelationID>d02dd9e3-295a-4268-9ea5-554eeb2e0e18</CorrelationID>          <Version>775</Version>          <Build>E775_CORE_BUNDLED_14891042_R1</Build> -          <CategoryArray>             <Category>                <BestOfferEnabled>true</BestOfferEnabled>                <AutoPayEnabled>true</AutoPayEnabled>                <CategoryID>20081</CategoryID>                <CategoryLevel>1</CategoryLevel>                <CategoryName>Antiques</CategoryName>                <CategoryParentID>20081</CategoryParentID>             </Category>             <Category>                <BestOfferEnabled>true</BestOfferEnabled>                <AutoPayEnabled>true</AutoPayEnabled>                <CategoryID>37903</CategoryID>                <CategoryLevel>2</CategoryLevel>                <CategoryName>Antiquities</CategoryName>                <CategoryParentID>20081</CategoryParentID>             </Category> (etc.) You could work with this, but I wanted a nicely nested view, like this: <CategoryArray>    <Category Name='Antiques' ID='20081' Level='1'>       <Category Name='Antiquities' ID='37903' Level='2'/> </CategoryArray> ...so I transformed the xml: private void TransformXML(CategoryTypeCollection cats)         {             XmlElement topLevelElement = null;             XmlElement childLevelElement = null;             XmlNode parentNode = null;             string categoryString = "";             XmlDocument returnDoc = new XmlDocument();             XmlElement root = returnDoc.CreateElement("CategoryArray");             returnDoc.AppendChild(root);             XmlNode rootNode = returnDoc.SelectSingleNode("/CategoryArray");             //Loop through CategoryTypeCollection             foreach (CategoryType category in cats)             {                 if (category.CategoryLevel == 1)                 {                     //Top-level category, so we know we can just add it                     topLevelElement = returnDoc.CreateElement("Category");                     topLevelElement.SetAttribute("Name", category.CategoryName);                     topLevelElement.SetAttribute("ID", category.CategoryID);                     rootNode.AppendChild(topLevelElement);                 }                 else                 {                     // Level number will determine how many Category nodes we are deep                     categoryString = "";                     for (int x = 1; x < category.CategoryLevel; x++)                     {                         categoryString += "/Category";                     }                     parentNode = returnDoc.SelectSingleNode("/CategoryArray" + categoryString + "[@ID='" + category.CategoryParentID[0] + "']");                     childLevelElement = returnDoc.CreateElement("Category");                     childLevelElement.SetAttribute("Name", category.CategoryName);                     childLevelElement.SetAttribute("ID", category.CategoryID);                     parentNode.AppendChild(childLevelElement);                 }             }             returnDoc.Save(@"C:\Temp\EbayCategories-Modified.xml");         } Yes, there are probably much cleaner ways of dealing with it, but I'm not an xml expert… Keep in mind, eBay categories do not change on a regular basis, so you should be able to cache this data (either in a file or database) for some time. The xml returns a CategoryVersion node that you can use to determine if the category list has changed. Technorati Tags: Csharp, eBay

    Read the article

  • Algorithm for Shortest Job First with Preemption

    - by Shray
    I want to implement a shortest job first routine using C# or C++. Priority of Jobs are based on their processing time. Jobs are processed using a binary (min) heap. There are three types of jobs. Type 1 is when jobs come in between every 4-6 seconds, with processing times between 4-6. Type 2 job comes in between 8-12 seconds, with processing times between 8-12. Type 3 job comes in between 24-26 seconds, with processing times between 14-16. So far, I have written the binary heap functionality, but Im kinda confused on how to start processing spawn and also the processor. #include <iostream> #include <stdlib.h> #include <time.h> using namespace std; int timecounting = 20; struct process{ int atime; int ptime; int type; }; class pque{ private: int count; public: process pheap[100]; process type1[100]; process type2[100]; process type3[100]; process type4[100]; pque(){ count = 0; } void swap(int a, int b){ process tempa = pheap[a]; process tempb = pheap[b]; pheap[b] = tempa; pheap[a] = tempb; } void add(process c){ int current; count++; pheap[count] = c; if(count > 0){ current = count; while(pheap[count/2].ptime > pheap[current].ptime){ swap(current/2, current); current = current/2; } } } void remove(){ process temp = pheap[1]; // saves process to temporary pheap[1] = pheap[count]; //takes last process in heap, and puts it at the root int n = 1; int leftchild = 2*n; int rightchild = 2*n + 1; while(leftchild < count && rightchild < count) { if(pheap[leftchild].ptime > pheap[rightchild].ptime) { if(pheap[leftchild].ptime > pheap[n].ptime) { swap(leftchild, n); n = leftchild; int leftchild = 2*n; int rightchild = 2*n + 1; } } else { if(pheap[rightchild].ptime > pheap[n].ptime) { swap(rightchild, n); n = rightchild; int leftchild = 2*n; int rightchild = 2*n + 1; } } } } void spawn1(){ process p; process p1; p1.atime = 0; int i = 0; srand(time(NULL)); while(i < timecounting) { p.atime = rand()%3 + 4 + p1.atime; p.ptime = rand()%5 + 1; p1.atime = p.atime; p.type = 1; type1[i+1] = p; i++; } } void spawn2(){ process p; process p1; p1.atime = 0; srand(time(NULL)); int i = 0; while(i < timecounting) { p.atime = rand()%3 + 9 + p1.atime; p.ptime = rand()%5 + 6; p1.atime = p.atime; p.type = 2; type2[i+1] = p; i++; } } void spawn3(){ process p; process p1; p1.atime = 0; srand(time(NULL)); int i = 0; while(i < timecounting) { p.atime = rand()%3 + 25 + p1.atime; p.ptime = rand()%5 + 11; p1.atime = p.atime; p.type = 3; type3[i+1] = p; i++; } } void spawn4(){ process p; process p1; p1.atime = 0; srand(time(NULL)); int i = 0; while(i < timecounting) { p.atime = rand()%6 + 30 + p1.atime; p.ptime = rand()%5 + 8; p1.atime = p.atime; p.type = 4; type4[i+1] = p; i++; } } void processor() { process p; process p1; p1.atime = 0; int n = 1; int n1 = 1; int n2 = 1; for(int i = 0; i<timecounting;i++) { if(type1[n].atime == i) { add(type1[n]); n++; } if(type2[n1].atime == i) { add(type1[n1]); n1++; } if(type3[n2].atime == i) { add(type1[n2]); n2++; } /* if(pheap[1].atime <= i) { while(pheap[1].atime != 0){ pheap[1].atime--; i++; } remove(); }*/ } } };

    Read the article

  • How to get predecessor and successors from an adjacency matrix

    - by NickTFried
    Hi I am am trying to complete an assignment, where it is ok to consult the online community. I have to create a graph class that ultimately can do Breadth First Search and Depth First Search. I have been able to implement those algorithms successfully however another requirement is to be able to get the successors and predecessors and detect if two vertices are either predecessors or successors for each other. I'm having trouble thinking of a way to do this. I will post my code below, if anyone has any suggestions it would be greatly appreciated. import java.util.ArrayList; import java.util.Iterator; import java.util.LinkedList; import java.util.Queue; import java.util.Stack; public class Graph<T> { public Vertex<T> root; public ArrayList<Vertex<T>> vertices=new ArrayList<Vertex<T>>(); public int[][] adjMatrix; int size; private ArrayList<Vertex<T>> dfsArrList; private ArrayList<Vertex<T>> bfsArrList; public void setRootVertex(Vertex<T> n) { this.root=n; } public Vertex<T> getRootVertex() { return this.root; } public void addVertex(Vertex<T> n) { vertices.add(n); } public void removeVertex(int loc){ vertices.remove(loc); } public void addEdge(Vertex<T> start,Vertex<T> end) { if(adjMatrix==null) { size=vertices.size(); adjMatrix=new int[size][size]; } int startIndex=vertices.indexOf(start); int endIndex=vertices.indexOf(end); adjMatrix[startIndex][endIndex]=1; adjMatrix[endIndex][startIndex]=1; } public void removeEdge(Vertex<T> v1, Vertex<T> v2){ int startIndex=vertices.indexOf(v1); int endIndex=vertices.indexOf(v2); adjMatrix[startIndex][endIndex]=1; adjMatrix[endIndex][startIndex]=1; } public int countVertices(){ int ver = vertices.size(); return ver; } /* public boolean isPredecessor( Vertex<T> a, Vertex<T> b){ for() return true; }*/ /* public boolean isSuccessor( Vertex<T> a, Vertex<T> b){ for() return true; }*/ public void getSuccessors(Vertex<T> v1){ } public void getPredessors(Vertex<T> v1){ } private Vertex<T> getUnvisitedChildNode(Vertex<T> n) { int index=vertices.indexOf(n); int j=0; while(j<size) { if(adjMatrix[index][j]==1 && vertices.get(j).visited==false) { return vertices.get(j); } j++; } return null; } public Iterator<Vertex<T>> bfs() { Queue<Vertex<T>> q=new LinkedList<Vertex<T>>(); q.add(this.root); printVertex(this.root); root.visited=true; while(!q.isEmpty()) { Vertex<T> n=q.remove(); Vertex<T> child=null; while((child=getUnvisitedChildNode(n))!=null) { child.visited=true; bfsArrList.add(child); q.add(child); } } clearVertices(); return bfsArrList.iterator(); } public Iterator<Vertex<T>> dfs() { Stack<Vertex<T>> s=new Stack<Vertex<T>>(); s.push(this.root); root.visited=true; printVertex(root); while(!s.isEmpty()) { Vertex<T> n=s.peek(); Vertex<T> child=getUnvisitedChildNode(n); if(child!=null) { child.visited=true; dfsArrList.add(child); s.push(child); } else { s.pop(); } } clearVertices(); return dfsArrList.iterator(); } private void clearVertices() { int i=0; while(i<size) { Vertex<T> n=vertices.get(i); n.visited=false; i++; } } private void printVertex(Vertex<T> n) { System.out.print(n.label+" "); } }

    Read the article

  • Doctrine_Table_Exception: Unknown relation alias [closed]

    - by Sadiqur Rahman
    I am getting following error message: Doctrine_Table_Exception: Unknown relation alias shoesTable in /home/public_html/projects/giftshoes/system/database/doctrine/Doctrine/Relation/Parser.php on line 237 My Code is below: ------------BaseShoe------------ <?php // Connection Component Binding Doctrine_Manager::getInstance()->bindComponent('Shoes', 'sadiqsof_giftshoes'); /** * BaseShoes * * This class has been auto-generated by the Doctrine ORM Framework * * @property integer $sku * @property string $name * @property string $keywords * @property string $description * @property string $manufacturer * @property float $sale_price * @property float $price * @property string $url * @property string $image * @property string $category * @property Doctrine_Collection $Viewes * * @package ##PACKAGE## * @subpackage ##SUBPACKAGE## * @author ##NAME## <##EMAIL##> * @version SVN: $Id: Builder.php 6820 2009-11-30 17:27:49Z jwage $ */ abstract class BaseShoes extends Doctrine_Record { public function setTableDefinition() { $this->setTableName('shoes'); $this->hasColumn('sku', 'integer', 4, array( 'type' => 'integer', 'fixed' => 0, 'unsigned' => false, 'primary' => true, 'autoincrement' => false, 'length' => '4', )); $this->hasColumn('name', 'string', 255, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '255', )); $this->hasColumn('keywords', 'string', 255, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '255', )); $this->hasColumn('description', 'string', null, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('manufacturer', 'string', 20, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '20', )); $this->hasColumn('sale_price', 'float', null, array( 'type' => 'float', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('price', 'float', null, array( 'type' => 'float', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('url', 'string', null, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('image', 'string', null, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '', )); $this->hasColumn('category', 'string', 50, array( 'type' => 'string', 'fixed' => 0, 'unsigned' => false, 'primary' => false, 'notnull' => true, 'autoincrement' => false, 'length' => '50', )); } public function setUp() { parent::setUp(); $this->hasMany('Viewes', array( 'local' => 'sku', 'foreign' => 'sku')); } } --------------ShoesTable-------- <?php class ShoesTable extends Doctrine_Table { function getAllShoes($from = 0, $total = 15) { $q = Doctrine_Query::create() ->from('Shoes') ->limit($total) ->offset($from); return $q->execute(array(), Doctrine::HYDRATE_ARRAY); } } ---------------Shoes Model----------------- <?php /** * Shoes * * This class has been auto-generated by the Doctrine ORM Framework * * @package ##PACKAGE## * @subpackage ##SUBPACKAGE## * @author ##NAME## <##EMAIL##> * @version SVN: $Id: Builder.php 6820 2009-11-30 17:27:49Z jwage $ */ class Shoes extends BaseShoes { function __construct() { parent::__construct(); $this->shoesTable = Doctrine::getTable('Shoes'); } function getAllShoes() { return $this->shoesTable->getAllShoes(); } }

    Read the article

  • Benchmarking MySQL Replication with Multi-Threaded Slaves

    - by Mat Keep
    0 0 1 1145 6530 Homework 54 15 7660 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} The objective of this benchmark is to measure the performance improvement achieved when enabling the Multi-Threaded Slave enhancement delivered as a part MySQL 5.6. As the results demonstrate, Multi-Threaded Slaves delivers 5x higher replication performance based on a configuration with 10 databases/schemas. For real-world deployments, higher replication performance directly translates to: · Improved consistency of reads from slaves (i.e. reduced risk of reading "stale" data) · Reduced risk of data loss should the master fail before replicating all events in its binary log (binlog) The multi-threaded slave splits processing between worker threads based on schema, allowing updates to be applied in parallel, rather than sequentially. This delivers benefits to those workloads that isolate application data using databases - e.g. multi-tenant systems deployed in cloud environments. Multi-Threaded Slaves are just one of many enhancements to replication previewed as part of the MySQL 5.6 Development Release, which include: · Global Transaction Identifiers coupled with MySQL utilities for automatic failover / switchover and slave promotion · Crash Safe Slaves and Binlog · Optimized Row Based Replication · Replication Event Checksums · Time Delayed Replication These and many more are discussed in the “MySQL 5.6 Replication: Enabling the Next Generation of Web & Cloud Services” Developer Zone article  Back to the benchmark - details are as follows. Environment The test environment consisted of two Linux servers: · one running the replication master · one running the replication slave. Only the slave was involved in the actual measurements, and was based on the following configuration: - Hardware: Oracle Sun Fire X4170 M2 Server - CPU: 2 sockets, 6 cores with hyper-threading, 2930 MHz. - OS: 64-bit Oracle Enterprise Linux 6.1 - Memory: 48 GB Test Procedure Initial Setup: Two MySQL servers were started on two different hosts, configured as replication master and slave. 10 sysbench schemas were created, each with a single table: CREATE TABLE `sbtest` (    `id` int(10) unsigned NOT NULL AUTO_INCREMENT,    `k` int(10) unsigned NOT NULL DEFAULT '0',    `c` char(120) NOT NULL DEFAULT '',    `pad` char(60) NOT NULL DEFAULT '',    PRIMARY KEY (`id`),    KEY `k` (`k`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 10,000 rows were inserted in each of the 10 tables, for a total of 100,000 rows. When the inserts had replicated to the slave, the slave threads were stopped. The slave data directory was copied to a backup location and the slave threads position in the master binlog noted. 10 sysbench clients, each configured with 10 threads, were spawned at the same time to generate a random schema load against each of the 10 schemas on the master. Each sysbench client executed 10,000 "update key" statements: UPDATE sbtest set k=k+1 WHERE id = <random row> In total, this generated 100,000 update statements to later replicate during the test itself. Test Methodology: The number of slave workers to test with was configured using: SET GLOBAL slave_parallel_workers=<workers> Then the slave IO thread was started and the test waited for all the update queries to be copied over to the relay log on the slave. The benchmark clock was started and then the slave SQL thread was started. The test waited for the slave SQL thread to finish executing the 100k update queries, doing "select master_pos_wait()". When master_pos_wait() returned, the benchmark clock was stopped and the duration calculated. The calculated duration from the benchmark clock should be close to the time it took for the SQL thread to execute the 100,000 update queries. The 100k queries divided by this duration gave the benchmark metric, reported as Queries Per Second (QPS). Test Reset: The test-reset cycle was implemented as follows: · the slave was stopped · the slave data directory replaced with the previous backup · the slave restarted with the slave threads replication pointer repositioned to the point before the update queries in the binlog. The test could then be repeated with identical set of queries but a different number of slave worker threads, enabling a fair comparison. The Test-Reset cycle was repeated 3 times for 0-24 number of workers and the QPS metric calculated and averaged for each worker count. MySQL Configuration The relevant configuration settings used for MySQL are as follows: binlog-format=STATEMENT relay-log-info-repository=TABLE master-info-repository=TABLE As described in the test procedure, the slave_parallel_workers setting was modified as part of the test logic. The consequence of changing this setting is: 0 worker threads:    - current (i.e. single threaded) sequential mode    - 1 x IO thread and 1 x SQL thread    - SQL thread both reads and executes the events 1 worker thread:    - sequential mode    - 1 x IO thread, 1 x Coordinator SQL thread and 1 x Worker thread    - coordinator reads the event and hands it to the worker who executes 2+ worker threads:    - parallel execution    - 1 x IO thread, 1 x Coordinator SQL thread and 2+ Worker threads    - coordinator reads events and hands them to the workers who execute them Results Figure 1 below shows that Multi-Threaded Slaves deliver ~5x higher replication performance when configured with 10 worker threads, with the load evenly distributed across our 10 x schemas. This result is compared to the current replication implementation which is based on a single SQL thread only (i.e. zero worker threads). Figure 1: 5x Higher Performance with Multi-Threaded Slaves The following figure shows more detailed results, with QPS sampled and reported as the worker threads are incremented. The raw numbers behind this graph are reported in the Appendix section of this post. Figure 2: Detailed Results As the results above show, the configuration does not scale noticably from 5 to 9 worker threads. When configured with 10 worker threads however, scalability increases significantly. The conclusion therefore is that it is desirable to configure the same number of worker threads as schemas. Other conclusions from the results: · Running with 1 worker compared to zero workers just introduces overhead without the benefit of parallel execution. · As expected, having more workers than schemas adds no visible benefit. Aside from what is shown in the results above, testing also demonstrated that the following settings had a very positive effect on slave performance: relay-log-info-repository=TABLE master-info-repository=TABLE For 5+ workers, it was up to 2.3 times as fast to run with TABLE compared to FILE. Conclusion As the results demonstrate, Multi-Threaded Slaves deliver significant performance increases to MySQL replication when handling multiple schemas. This, and the other replication enhancements introduced in MySQL 5.6 are fully available for you to download and evaluate now from the MySQL Developer site (select Development Release tab). You can learn more about MySQL 5.6 from the documentation  Please don’t hesitate to comment on this or other replication blogs with feedback and questions. Appendix – Detailed Results

    Read the article

  • finding numbers of days between two date to make a dynamic columns

    - by Chandradyani
    Dear all, I have a select query that currently produces the following results: DoctorName Team 1 2 3 4 5 6 7 ... 31 Visited dr. As   A                             x    x ...      2 times dr. Sc   A                          x          ...      1 times dr. Gh   B                                  x ...      1 times dr. Nd   C                                     ... x    1 times Using the following query: DECLARE @startDate = '1/1/2010', @enddate = '1/31/2010' SELECT d.doctorname, t.teamname, MAX(CASE WHEN ca.visitdate = 1 THEN 'x' ELSE NULL END) AS 1, MAX(CASE WHEN ca.visitdate = 2 THEN 'x' ELSE NULL END) AS 2, MAX(CASE WHEN ca.visitdate = 3 THEN 'x' ELSE NULL END) AS 3, ... MAX(CASE WHEN ca.visitdate = 31 THEN 'x' ELSE NULL END) AS 31, COUNT(*) AS visited FROM CACTIVITY ca JOIN DOCTOR d ON d.id = ca.doctorid JOIN TEAM t ON t.id = ca.teamid WHERE ca.visitdate BETWEEN @startdate AND @enddate GROUP BY d.doctorname, t.teamname the problem is I want to make the column of date are dynamic for example if ca.visitdate BETWEEN '2/1/2012' AND '2/29/2012' so the result will be : DoctorName Team 1 2 3 4 5 6 7 ... 29 Visited dr. As   A                             x    x ...      2 times dr. Sc   A                          x          ...      1 times dr. Gh   B                                  x ...      1 times dr. Nd   C                                     ... x    1 times Can somebody help me how to get numbers of days between two date and help me revised the query so it can looping MAX(CASE WHEN ca.visitdate = 1 THEN 'x' ELSE NULL END) AS 1 as many as numbers of days? Please please

    Read the article

  • My vertex shader doesn't affect texture coords or diffuse info but works for position

    - by tina nyaa
    I am new to 3D and DirectX - in the past I have only used abstractions for 2D drawing. Over the past month I've been studying really hard and I'm trying to modify and adapt some of the shaders as part of my personal 'study project'. Below I have a shader, modified from one of the Microsoft samples. I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? // // Skinned Mesh Effect file // Copyright (c) 2000-2002 Microsoft Corporation. All rights reserved. // float4 lhtDir = {0.0f, 0.0f, -1.0f, 1.0f}; //light Direction float4 lightDiffuse = {0.6f, 0.6f, 0.6f, 1.0f}; // Light Diffuse float4 MaterialAmbient : MATERIALAMBIENT = {0.1f, 0.1f, 0.1f, 1.0f}; float4 MaterialDiffuse : MATERIALDIFFUSE = {0.8f, 0.8f, 0.8f, 1.0f}; // Matrix Pallette static const int MAX_MATRICES = 100; float4x3 mWorldMatrixArray[MAX_MATRICES] : WORLDMATRIXARRAY; float4x4 mViewProj : VIEWPROJECTION; /////////////////////////////////////////////////////// struct VS_INPUT { float4 Pos : POSITION; float4 BlendWeights : BLENDWEIGHT; float4 BlendIndices : BLENDINDICES; float3 Normal : NORMAL; float3 Tex0 : TEXCOORD0; }; struct VS_OUTPUT { float4 Pos : POSITION; float4 Diffuse : COLOR; float2 Tex0 : TEXCOORD0; }; float3 Diffuse(float3 Normal) { float CosTheta; // N.L Clamped CosTheta = max(0.0f, dot(Normal, lhtDir.xyz)); // propogate scalar result to vector return (CosTheta); } VS_OUTPUT VShade(VS_INPUT i, uniform int NumBones) { VS_OUTPUT o; float3 Pos = 0.0f; float3 Normal = 0.0f; float LastWeight = 0.0f; // Compensate for lack of UBYTE4 on Geforce3 int4 IndexVector = D3DCOLORtoUBYTE4(i.BlendIndices); // cast the vectors to arrays for use in the for loop below float BlendWeightsArray[4] = (float[4])i.BlendWeights; int IndexArray[4] = (int[4])IndexVector; // calculate the pos/normal using the "normal" weights // and accumulate the weights to calculate the last weight for (int iBone = 0; iBone < NumBones-1; iBone++) { LastWeight = LastWeight + BlendWeightsArray[iBone]; Pos += mul(i.Pos, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; Normal += mul(i.Normal, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; } LastWeight = 1.0f - LastWeight; // Now that we have the calculated weight, add in the final influence Pos += (mul(i.Pos, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); Normal += (mul(i.Normal, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); // transform position from world space into view and then projection space //o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Diffuse.x = 0.0f; o.Diffuse.y = 0.0f; o.Diffuse.z = 0.0f; o.Diffuse.w = 0.0f; o.Tex0 = float2(0,0); return o; } technique t0 { pass p0 { VertexShader = compile vs_3_0 VShade(4); } } I am currently using the SlimDX .NET wrapper around DirectX, but the API is extremely similar: public void Draw() { var device = vertexBuffer.Device; device.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.White, 1.0f, 0); device.SetRenderState(RenderState.Lighting, true); device.SetRenderState(RenderState.DitherEnable, true); device.SetRenderState(RenderState.ZEnable, true); device.SetRenderState(RenderState.CullMode, Cull.Counterclockwise); device.SetRenderState(RenderState.NormalizeNormals, true); device.SetSamplerState(0, SamplerState.MagFilter, TextureFilter.Anisotropic); device.SetSamplerState(0, SamplerState.MinFilter, TextureFilter.Anisotropic); device.SetTransform(TransformState.World, Matrix.Identity * Matrix.Translation(0, -50, 0)); device.SetTransform(TransformState.View, Matrix.LookAtLH(new Vector3(-200, 0, 0), Vector3.Zero, Vector3.UnitY)); device.SetTransform(TransformState.Projection, Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); var material = new Material(); material.Ambient = material.Diffuse = material.Emissive = material.Specular = new Color4(Color.White); material.Power = 1f; device.SetStreamSource(0, vertexBuffer, 0, vertexSize); device.VertexDeclaration = vertexDeclaration; device.Indices = indexBuffer; device.Material = material; device.SetTexture(0, texture); var param = effect.GetParameter(null, "mWorldMatrixArray"); var boneWorldTransforms = bones.OrderedBones.OrderBy(x => x.Id).Select(x => x.CombinedTransformation).ToArray(); effect.SetValue(param, boneWorldTransforms); effect.SetValue(effect.GetParameter(null, "mViewProj"), Matrix.Identity);// Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); effect.SetValue(effect.GetParameter(null, "MaterialDiffuse"), material.Diffuse); effect.SetValue(effect.GetParameter(null, "MaterialAmbient"), material.Ambient); effect.Technique = effect.GetTechnique(0); var passes = effect.Begin(FX.DoNotSaveState); for (var i = 0; i < passes; i++) { effect.BeginPass(i); device.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, skin.Vertices.Length, 0, skin.Indicies.Length / 3); effect.EndPass(); } effect.End(); } Again, I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? Also, whatever I set in the bone transformation matrices doesn't seem to have an effect on my model. If I set every bone transformation to a zero matrix, the model still shows up as if nothing had happened, but changing the Pos field in shader output makes the model disappear. I don't understand why I'm getting this kind of behaviour. Thank you!

    Read the article

  • How to check all check boxes at a click of a button

    - by LivingThing
    I am new to Swing, UI and MVC I have created a code based on MVC. Now my problem is that that in the controller part i have an actioneventlistener which listens to different button clicks. Out of all those buttons i have "select all" and "de-select all". In my view i have a table, one of the column of that table contains "check boxes". Now, when i click the "select-all" button i want to check all the check boxes and with "de-select all" i want to uncheck all of them. Below is my code which is not working. Please tell me what am i doing wrong here. Also, if someone knows a more elagent way please share. Thanks In my view public class CustomerSelectorDialogUI extends JFrame{ public CustomerSelectorDialogUI(TestApplicationUI ownerView, DummyCustomerStore dCStore, boolean modality) { //super(ownerView, modality); setTitle("[=] Customer Selection Dialog [=]"); //setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE); custSelectPanel = new JPanel(); buttonPanel = new JPanel(); selectAllButton = new JButton(" Select All "); clearAllButton = new JButton(" Clear All "); applyButton = new JButton(" Apply "); cancelButton = new JButton(" Cancel "); PopulateAndShow(dCStore, Boolean.FALSE); } public void PopulateAndShow(DummyCustomerStore dCStore, Boolean select) { List data = new ArrayList(); for (Customer customer : dCStore.getAllCustomers()) { Object record[] = new Object[COLUMN_COUNT]; record[0] = (select == false) ? Boolean.FALSE : Boolean.TRUE; record[1] = Integer.toString(customer.customerId); record[2] = customer.fullName; data.add(record); } tModel = new TableModel(data); // In the above for loop accoring to user input (i.e click on check all or // uncheck all) i have tried to update the data. As it can be seen that i // have a condition for record[0]. //After the loop, here i have tried several options like validate(). repaint but to no avail customerTable = new JTable(tModel); scrollPane = new JScrollPane(customerTable); setContentPane(this.createContentPane()); setSize(480, 580); setResizable(false); setVisible(true); } private JPanel createContentPane() { custSelectPanel.setLayout(null); customerTable.setDragEnabled(false); customerTable.setFillsViewportHeight(true); scrollPane.setLocation(10, 10); scrollPane.setSize(450,450); custSelectPanel.add(scrollPane); buttonPanel.setLayout(null); buttonPanel.setLocation(10, 480); buttonPanel.setSize(450, 100); custSelectPanel.add(buttonPanel); selectAllButton.setLocation(0, 0); selectAllButton.setSize(100, 40); buttonPanel.add(selectAllButton); clearAllButton.setLocation(110, 0); clearAllButton.setSize(100, 40); buttonPanel.add(clearAllButton); applyButton.setLocation(240, 0); applyButton.setSize(100, 40); buttonPanel.add(applyButton); cancelButton.setLocation(350, 0); cancelButton.setSize(100, 40); buttonPanel.add(cancelButton); return custSelectPanel; } } Table Model private class TableModel extends AbstractTableModel { private List data; public TableModel(List data) { this.data = data; } private String[] columnNames = {"Selected ", "Customer Id ", "Customer Name " }; public int getColumnCount() { return COLUMN_COUNT; } public int getRowCount() { return data == null ? 0 : data.size(); } public String getColumnName(int col) { return columnNames[col]; } public void setValueAt(Object value, int rowIndex, int columnIndex) { getRecord(rowIndex)[columnIndex] = value; super.fireTableCellUpdated(rowIndex, columnIndex); } private Object[] getRecord(int rowIndex) { return (Object[]) data.get(rowIndex); } public Object getValueAt(int rowIndex, int columnIndex) { return getRecord(rowIndex)[columnIndex]; } public Class getColumnClass(int columnIndex) { if (data == null || data.size() == 0) { return Object.class; } Object o = getValueAt(0, columnIndex); return o == null ? Object.class : o.getClass(); } public boolean isCellEditable(int row, int col) { if (col > 0) { return false; } else { return true; } } } } A Views Action Listener class CustomerSelectorUIListener implements ActionListener{ CustomerSelectorDialogUI custSelectView; Controller controller; public CustomerSelectorUIListener (Controller controller, CustomerSelectorDialogUI custSelectView) { this.custSelectView = custSelectView; this.controller = controller; } @Override public void actionPerformed(ActionEvent e) { String actionEvent = e.getActionCommand(); else if ( actionEvent.equals( "clearAllButton" ) ) { controller.checkButtonControl(false); } else if ( actionEvent.equals( "selectAllButton" ) ) { controller.checkButtonControl(true); } } } Main Controller public class Controller implements ActionListener{ CustomerSelectorDialogUI selectUI; DummyCustomerStore store; public Controller( DummyCustomerStore store, TestApplicationUI appUI ) { this.store = store; this.appUI = appUI; appUI.ButtonListener( this ); } @Override public void actionPerformed(ActionEvent event) { String viewAction = event.getActionCommand(); if (viewAction.equals("TEST")) { selectUI = new CustomerSelectorDialogUI(appUI, store, true); selectUI.showTextActionListeners(new CustomerSelectorUIListener( this, selectUI ) ); selectUI.setVisible( true ); } } public void checkButtonControl (Boolean checkAll) { selectUI.PopulateAndShow(store, checkAll); } }

    Read the article

  • Control-Break Style ADF Table - Comparing Values with Previous Row

    - by Steven Davelaar
    Sometimes you need to display data in an ADF Faces table in a control-break layout style, where rows should be "indented" when the break column has the same value as in the previous row. In the screen shot below, you see how the table breaks on both the RegionId column as well as the CountryId column. To implement this I didn't use fancy SQL statements. The table is based on a straightforward Locations ViewObject that is based on the Locations entity object and the Countries reference entity object, and the join query was automatically created by adding the reference EO. To get the indentation in the ADF Faces table, we simple use two rendered properties on the RegionId and CountryId outputText items:  <af:column sortProperty="RegionId" sortable="false"            headerText="#{bindings.LocationsView1.hints.RegionId.label}"            id="c5">   <af:outputText value="#{row.RegionId}" id="ot2"                  rendered="#{!CompareWithPreviousRowBean['RegionId']}">     <af:convertNumber groupingUsed="false"                       pattern="#{bindings.LocationsView1.hints.RegionId.format}"/>   </af:outputText> </af:column> <af:column sortProperty="CountryId" sortable="false"            headerText="#{bindings.LocationsView1.hints.CountryId.label}"            id="c1">   <af:outputText value="#{row.CountryId}" id="ot5"                  rendered="#{!CompareWithPreviousRowBean['CountryId']}"/> </af:column> The CompareWithPreviousRowBean managed bean is defined in request scope and is a generic bean that can be used for all the tables in your application that needs this layout style. As you can see the bean is a Map-style bean where we pass in the name of the attribute that should be compared with the previous row. The get method in the bean that is called returns boolean false when the attribute has the same value in the same row. Here is the code of the get method:  public Object get(Object key) {   String attrName = (String) key;   boolean isSame = false;   // get the currently processed row, using row expression #{row}   JUCtrlHierNodeBinding row = (JUCtrlHierNodeBinding) resolveExpression(getRowExpression());   JUCtrlHierBinding tableBinding = row.getHierBinding();   int rowRangeIndex = row.getViewObject().getRangeIndexOf(row.getRow());   Object currentAttrValue = row.getRow().getAttribute(attrName);   if (rowRangeIndex > 0)   {     Object previousAttrValue = tableBinding.getAttributeFromRow(rowRangeIndex - 1, attrName);     isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue);   }   else if (tableBinding.getRangeStart() > 0)   {     // previous row is in previous range, we create separate rowset iterator,     // so we can change the range start without messing up the table rendering which uses     // the default rowset iterator     int absoluteIndexPreviousRow = tableBinding.getRangeStart() - 1;     RowSetIterator rsi = null;     try     {       rsi = tableBinding.getViewObject().getRowSet().createRowSetIterator(null);       rsi.setRangeStart(absoluteIndexPreviousRow);       Row previousRow = rsi.getRowAtRangeIndex(0);       Object previousAttrValue = previousRow.getAttribute(attrName);       isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue);     }     finally     {       rsi.closeRowSetIterator();     }   }   return isSame; } The row expression defaults to #{row} but this can be changed through the rowExpression  managed property of the bean.  You can download the sample application here.

    Read the article

  • Windows Impersonation failed

    - by skprocks
    I am using following code to implement impersonation for the particular windows account,which is failing.Please help. using System.Security.Principal; using System.Runtime.InteropServices; public partial class Source_AddNewProduct : System.Web.UI.Page { [DllImport("advapi32.dll", SetLastError = true)] static extern bool LogonUser( string principal, string authority, string password, LogonSessionType logonType, LogonProvider logonProvider, out IntPtr token); [DllImport("kernel32.dll", SetLastError = true)] static extern bool CloseHandle(IntPtr handle); enum LogonSessionType : uint { Interactive = 2, Network, Batch, Service, NetworkCleartext = 8, NewCredentials } enum LogonProvider : uint { Default = 0, // default for platform (use this!) WinNT35, // sends smoke signals to authority WinNT40, // uses NTLM WinNT50 // negotiates Kerb or NTLM } //impersonation is used when user tries to upload an image to a network drive protected void btnPrimaryPicUpload_Click1(object sender, EventArgs e) { try { string mDocumentExt = string.Empty; string mDocumentName = string.Empty; HttpPostedFile mUserPostedFile = null; HttpFileCollection mUploadedFiles = null; string xmlPath = string.Empty; FileStream fs = null; StreamReader file; string modify; mUploadedFiles = HttpContext.Current.Request.Files; mUserPostedFile = mUploadedFiles[0]; if (mUserPostedFile.ContentLength >= 0 && Path.GetFileName(mUserPostedFile.FileName) != "") { mDocumentName = Path.GetFileName(mUserPostedFile.FileName); mDocumentExt = Path.GetExtension(mDocumentName); mDocumentExt = mDocumentExt.ToLower(); if (mDocumentExt != ".jpg" && mDocumentExt != ".JPG" && mDocumentExt != ".gif" && mDocumentExt != ".GIF" && mDocumentExt != ".jpeg" && mDocumentExt != ".JPEG" && mDocumentExt != ".tiff" && mDocumentExt != ".TIFF" && mDocumentExt != ".png" && mDocumentExt != ".PNG" && mDocumentExt != ".raw" && mDocumentExt != ".RAW" && mDocumentExt != ".bmp" && mDocumentExt != ".BMP" && mDocumentExt != ".TIF" && mDocumentExt != ".tif") { Page.RegisterStartupScript("select", "<script language=" + Convert.ToChar(34) + "VBScript" + Convert.ToChar(34) + "> MsgBox " + Convert.ToChar(34) + "Please upload valid picture file format" + Convert.ToChar(34) + " , " + Convert.ToChar(34) + "64" + Convert.ToChar(34) + " , " + Convert.ToChar(34) + "WFISware" + Convert.ToChar(34) + "</script>"); } else { int intDocLen = mUserPostedFile.ContentLength; byte[] imageBytes = new byte[intDocLen]; mUserPostedFile.InputStream.Read(imageBytes, 0, mUserPostedFile.ContentLength); //xmlPath = @ConfigurationManager.AppSettings["ImagePath"].ToString(); xmlPath = Server.MapPath("./../ProductImages/"); mDocumentName = Guid.NewGuid().ToString().Replace("-", "") + System.IO.Path.GetExtension(mUserPostedFile.FileName); //if (System.IO.Path.GetExtension(mUserPostedFile.FileName) == ".jpg") //{ //} //if (System.IO.Path.GetExtension(mUserPostedFile.FileName) == ".gif") //{ //} mUserPostedFile.SaveAs(xmlPath + mDocumentName); //Remove commenting till upto stmt xmlPath = "./../ProductImages/"; to implement impersonation byte[] bytContent; IntPtr token = IntPtr.Zero; WindowsImpersonationContext impersonatedUser = null; try { // Note: Credentials should be encrypted in configuration file bool result = LogonUser(ConfigurationManager.AppSettings["ServiceAccount"].ToString(), "ad-ent", ConfigurationManager.AppSettings["ServiceAccountPassword"].ToString(), LogonSessionType.Network, LogonProvider.Default, out token); if (result) { WindowsIdentity id = new WindowsIdentity(token); // Begin impersonation impersonatedUser = id.Impersonate(); mUserPostedFile.SaveAs(xmlPath + mDocumentName); } else { throw new Exception("Identity impersonation has failed."); } } catch { throw; } finally { // Stop impersonation and revert to the process identity if (impersonatedUser != null) impersonatedUser.Undo(); // Free the token if (token != IntPtr.Zero) CloseHandle(token); } xmlPath = "./../ProductImages/"; xmlPath = xmlPath + mDocumentName; string o_image = xmlPath; //For impersoantion uncomment this line and comment next line //string o_image = "../ProductImages/" + mDocumentName; ViewState["masterImage"] = o_image; //fs = new FileStream(xmlPath, FileMode.Open, FileAccess.Read); //file = new StreamReader(fs, Encoding.UTF8); //modify = file.ReadToEnd(); //file.Close(); //commented by saurabh kumar 28may'09 imgImage.Visible = true; imgImage.ImageUrl = ViewState["masterImage"].ToString(); img_Label1.Visible = false; } //e.Values["TemplateContent"] = modify; //e.Values["TemplateName"] = mDocumentName.Replace(".xml", ""); } } catch (Exception ex) { ExceptionUtil.UI(ex); Response.Redirect("errorpage.aspx"); } } } The code on execution throws system.invalidoperation exception.I have provided full control to destination folder to the windows service account that i am impersonating.

    Read the article

  • Create Auto Customization Criteria OAF Search Page

    - by PRajkumar
    1. Create a New Workspace and Project Right click Workspaces and click create new OAworkspace and name it as PRajkumarCustSearch. Automatically a new OA Project will also be created. Name the project as CustSearchDemo and package as prajkumar.oracle.apps.fnd.custsearchdemo   2. Create a New Application Module (AM) Right Click on CustSearchDemo > New > ADF Business Components > Application Module Name -- CustSearchAM Package -- prajkumar.oracle.apps.fnd.custsearchdemo.server   3. Enable Passivation for the Root UI Application Module (AM) Right Click on CustSearchAM > Edit SearchAM > Custom Properties > Name – RETENTION_LEVEL Value – MANAGE_STATE Click add > Apply > OK   4. Create Test Table and insert data some data in it (For Testing Purpose)   CREATE TABLE xx_custsearch_demo (   -- ---------------------     -- Data Columns     -- ---------------------     column1                  VARCHAR2(100),     column2                  VARCHAR2(100),     column3                  VARCHAR2(100),     column4                  VARCHAR2(100),     -- ---------------------     -- Who Columns     -- ---------------------     last_update_date    DATE         NOT NULL,     last_updated_by     NUMBER   NOT NULL,     creation_date          DATE         NOT NULL,     created_by               NUMBER   NOT NULL,     last_update_login   NUMBER  );   INSERT INTO xx_custsearch_demo VALUES('v1','v2','v3','v4',SYSDATE,0,SYSDATE,0,0); INSERT INTO xx_custsearch_demo VALUES('v1','v3','v4','v5',SYSDATE,0,SYSDATE,0,0); INSERT INTO xx_custsearch_demo VALUES('v2','v3','v4','v5',SYSDATE,0,SYSDATE,0,0); INSERT INTO xx_custsearch_demo VALUES('v3','v4','v5','v6',SYSDATE,0,SYSDATE,0,0); Now we have 4 records in our custom table   5. Create a New Entity Object (EO) Right click on SearchDemo > New > ADF Business Components > Entity Object Name – CustSearchEO Package -- prajkumar.oracle.apps.fnd.custsearchdemo.schema.server Database Objects -- XX_CUSTSEARCH_DEMO   Note – By default ROWID will be the primary key if we will not make any column to be primary key   Check the Accessors, Create Method, Validation Method and Remove Method   6. Create a New View Object (VO) Right click on CustSearchDemo > New > ADF Business Components > View Object Name -- CustSearchVO Package -- prajkumar.oracle.apps.fnd.custsearchdemo.server   In Step2 in Entity Page select CustSearchEO and shuttle them to selected list   In Step3 in Attributes Window select columns Column1, Column2, Column3, Column4, and shuttle them to selected list   In Java page deselect Generate Java file for View Object Class: CustSearchVOImpl and Select Generate Java File for View Row Class: CustSearchVORowImpl   7. Add Your View Object to Root UI Application Module Select Right click on CustSearchAM > Application Modules > Data Model Select CustSearchVO and shuttle to Data Model list   8. Create a New Page Right click on CustSearchDemo > New > Web Tier > OA Components > Page Name -- CustSearchPG Package -- prajkumar.oracle.apps.fnd.custsearchdemo.webui   9. Select the CustSearchPG and go to the strcuture pane where a default region has been created   10. Select region1 and set the following properties: ID -- PageLayoutRN Region Style -- PageLayout AM Definition -- prajkumar.oracle.apps.fnd.custsearchdemo.server.CustSearchAM Window Title – AutoCustomize Search Page Window Title – AutoCustomization Search Page Auto Footer -- True   11. Add a Query Bean to Your Page Right click on PageLayoutRN > New > Region Select new region region1 and set following properties ID – QueryRN Region Style – query Construction Mode – autoCustomizationCriteria Include Simple Panel – False Include Views Panel – False Include Advanced Panel – False   12. Create a New Region of style table Right Click on QueryRN > New > Region Using Wizard Application Module – prajkumar.oracle.apps.fnd.custsearchdemo.server.CustSearchAM Available View Usages – CustSearchVO1   In Step2 in Region Properties set following properties Region ID – CustSearchTable Region Style – Table   In Step3 in View Attributes shuttle all the items (Column1, Column2, Column3, Column4) available in “Available View Attributes” to Selected View Attributes: In Step4 in Region Items page set style to “messageStyledText” for all items   13. Select CustSearchTable in Structure Panel and set property Width to 100%   14. Include Simple Search Panel Right Click on QueryRN > New > simpleSearchPanel Automatically region2 (header Region) and region1 (MessageComponentLayout Region) created Set Following Properties for region2 Id – SimpleSearchHeader Text -- Simple Search   15. Now right click on message Component Layout Region (SimpleSearchMappings) and create two message text input beans and set the below properties to each   Message TextInputBean1 Id – SearchColumn1 Search Allowed – True Data Type – VARCHAR2 Maximum Length – CSS Class – OraFieldText Prompt – Column1   Message TextInputBean2 Id – SearchColumn2 Search Allowed -- True Data Type – VARCHAR2 Maximum Length – 100 CSS Class – OraFieldText Prompt – Column2   16. Now Right Click on query Components and create simple Search Mappings. Then automatically SimpleSearchMappings and QueryCriteriaMap1 created   17.  Now select the QueryCriteriaMap1 and set the below properties Id – SearchColumn1Map Search Item – SearchColumn1 Result Item – Column1   18. Now again right click on simpleSearchMappings -> New -> queryCriteriaMap, and then set the below properties Id – SearchColumn2Map Search Item – SearchColumn2 Result Item – Column2   19. Congratulation you have successfully finished Auto Customization Search page. Run Your CustSearchPG page and Test Your Work            

    Read the article

  • adjust selected File to FileFilter in a JFileChooser

    - by amarillion
    I'm writing a diagram editor in java. This app has the option to export to various standard image formats such as .jpg, .png etc. When the user clicks File-Export, you get a JFileChooser which has a number of FileFilters in it, for .jpg, .png etc. Now here is my question: Is there a way to have the extension of the default adjust to the selected file filter? E.g. if the document is named "lolcat" then the default option should be "lolcat.png" when the png filter is selected, and when the user selects the jpg file filter, the default should change to "lolcat.jpg" automatically. Is this possible? How can I do it? edit: Based on the answer below, I wrote some code. But it doesn't quite work yet. I've added a propertyChangeListener to the FILE_FILTER_CHANGED_PROPERTY, but it seems that within this method getSelectedFile() returns null. Here is the code. package nl.helixsoft; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.beans.PropertyChangeEvent; import java.beans.PropertyChangeListener; import java.io.File; import java.util.ArrayList; import java.util.List; import javax.swing.JButton; import javax.swing.JFileChooser; import javax.swing.JFrame; import javax.swing.filechooser.FileFilter; public class JFileChooserTest { public class SimpleFileFilter extends FileFilter { private String desc; private List<String> extensions; private boolean showDirectories; /** * @param name example: "Data files" * @param glob example: "*.txt|*.csv" */ public SimpleFileFilter (String name, String globs) { extensions = new ArrayList<String>(); for (String glob : globs.split("\\|")) { if (!glob.startsWith("*.")) throw new IllegalArgumentException("expected list of globs like \"*.txt|*.csv\""); // cut off "*" // store only lower case (make comparison case insensitive) extensions.add (glob.substring(1).toLowerCase()); } desc = name + " (" + globs + ")"; } public SimpleFileFilter(String name, String globs, boolean showDirectories) { this(name, globs); this.showDirectories = showDirectories; } @Override public boolean accept(File file) { if(showDirectories && file.isDirectory()) { return true; } String fileName = file.toString().toLowerCase(); for (String extension : extensions) { if (fileName.endsWith (extension)) { return true; } } return false; } @Override public String getDescription() { return desc; } /** * @return includes '.' */ public String getFirstExtension() { return extensions.get(0); } } void export() { String documentTitle = "lolcat"; final JFileChooser jfc = new JFileChooser(); jfc.setDialogTitle("Export"); jfc.setDialogType(JFileChooser.SAVE_DIALOG); jfc.setSelectedFile(new File (documentTitle)); jfc.addChoosableFileFilter(new SimpleFileFilter("JPEG", "*.jpg")); jfc.addChoosableFileFilter(new SimpleFileFilter("PNG", "*.png")); jfc.addPropertyChangeListener(JFileChooser.FILE_FILTER_CHANGED_PROPERTY, new PropertyChangeListener() { public void propertyChange(PropertyChangeEvent arg0) { System.out.println ("Property changed"); String extold = null; String extnew = null; if (arg0.getOldValue() == null || !(arg0.getOldValue() instanceof SimpleFileFilter)) return; if (arg0.getNewValue() == null || !(arg0.getNewValue() instanceof SimpleFileFilter)) return; SimpleFileFilter oldValue = ((SimpleFileFilter)arg0.getOldValue()); SimpleFileFilter newValue = ((SimpleFileFilter)arg0.getNewValue()); extold = oldValue.getFirstExtension(); extnew = newValue.getFirstExtension(); String filename = "" + jfc.getSelectedFile(); System.out.println ("file: " + filename + " old: " + extold + ", new: " + extnew); if (filename.endsWith(extold)) { filename.replace(extold, extnew); } else { filename += extnew; } jfc.setSelectedFile(new File (filename)); } }); jfc.showDialog(frame, "export"); } JFrame frame; void run() { frame = new JFrame(); JButton btn = new JButton ("export"); frame.add (btn); btn.addActionListener (new ActionListener() { public void actionPerformed(ActionEvent ae) { export(); } }); frame.setSize (300, 300); frame.pack(); frame.setVisible(true); } public static void main(String[] args) { javax.swing.SwingUtilities.invokeLater(new Runnable() { public void run() { JFileChooserTest x = new JFileChooserTest(); x.run(); } }); } }

    Read the article

  • Recursion in the form of a Recursive Func&lt;T, T&gt;

    - by ToStringTheory
    I gotta admit, I am kind of surprised that I didn’t realize I could do this sooner.  I recently had a problem which required a recursive function call to come up with the answer.  After some time messing around with a recursive method, and creating an API that I was not happy with, I was able to create an API that I enjoy, and seems intuitive. Introduction To bring it to a simple example, consider the summation to n: A mathematically identical formula is: In a .NET function, this can be represented by a function: Func<int, int> summation = x => x*(x+1)/2 Calling summation with an input integer will yield the summation to that number: var sum10 = summation(4); //sum10 would be equal to 10 But what if I wanted to get a second level summation…  First some to n, and then use that argument as the input to the same function, to find the second level summation: So as an easy example, calculate the summation to 3, which yields 6.  Then calculate the summation to 6 which yields 21. Represented as a mathematical formula - So what if I wanted to represent this as .NET functions.  I can always do: //using the summation formula from above var sum3 = summation(3); //sets sum3 to 6 var sum3_2 = summation(sum3); //sets sum3 to 21 I could always create a while loop to perform the calculations too: Func<int, int> summation = x => x*(x+1)/2; //for the interests of a smaller example, using shorthand int sumResultTo = 3; int level = 2; while(level-- > 0) { sumResultTo = summation(sumResultTo); } //sumResultTo is equal to 21 now. Or express it as a for-loop, method calls, etc…  I really didn’t like any of the options that I tried.  Then it dawned on me – since I was using a Func<T, T> anyways, why not use the Func’s output from one call as the input as another directly. Some Code So, I decided that I wanted a recursion class.  Something that I would be generic and reusable in case I ever wanted to do something like this again. It is limited to only the Func<T1, T2> level of Func, and T1 must be the same as T2. The first thing in this class is a private field for the function: private readonly Func<T, T> _functionToRecurse; So, I since I want the function to be unchangeable, I have defined it as readonly.  Therefore my constructor looks like: public Recursion(Func<T, T> functionToRecurse) { if (functionToRecurse == null) { throw new ArgumentNullException("functionToRecurse", "The function to recurse can not be null"); } _functionToRecurse = functionToRecurse; } Simple enough.  If you have any questions, feel free to post them in the comments, and I will be sure to answer them. Next, I want enough. If be able to get the result of a function dependent on how many levels of recursion: private Func<T, T> GetXLevel(int level) { if (level < 1) { throw new ArgumentOutOfRangeException("level", level, "The level of recursion must be greater than 0"); } if (level == 1) return _functionToRecurse; return _GetXLevel(level - 1, _functionToRecurse); } So, if you pass in 1 for the level, you get just the Func<T,T> back.  If you say that you want to go deeper down the rabbit hole, it calls a method which accepts the level it is at, and the function which it needs to use to recurse further: private Func<T, T> _GetXLevel(int level, Func<T, T> prevFunc) { if (level == 1) return y => prevFunc(_functionToRecurse(y)); return _GetXLevel(level - 1, y => prevFunc(_functionToRecurse(y))); } That is really all that is needed for this class. If I exposed the GetXLevel function publicly, I could use that to get the function for a level, and pass in the argument..  But I wanted something better.  So, I used the ‘this’ array operator for the class: public Func<T,T> this[int level] { get { if (level < 1) { throw new ArgumentOutOfRangeException("level", level, "The level of recursion must be greater than 0"); } return this.GetXLevel(level); } } So, using the same example above of finding the second recursion of the summation of 3: var summator = new Recursion<int>(x => (x * (x + 1)) / 2); var sum_3_level2 = summator[2](3); //yields 21 You can even find just store the delegate to the second level summation, and use it multiple times: var summator = new Recursion<int>(x => (x * (x + 1)) / 2); var sum_level2 = summator[2]; var sum_3_level2 = sum_level2(3); //yields 21 var sum_4_level2 = sum_level2(4); //yields 55 var sum_5_level2 = sum_level2(5); //yields 120 Full Code Don’t think I was just going to hold off on the full file together and make you do the hard work…  Copy this into a new class file: public class Recursion<T> { private readonly Func<T, T> _functionToRecurse; public Recursion(Func<T, T> functionToRecurse) { if (functionToRecurse == null) { throw new ArgumentNullException("functionToRecurse", "The function to recurse can not be null"); } _functionToRecurse = functionToRecurse; } public Func<T,T> this[int level] { get { if (level < 1) { throw new ArgumentOutOfRangeException("level", level, "The level of recursion must be greater than 0"); } return this.GetXLevel(level); } } private Func<T, T> GetXLevel(int level) { if (level < 1) { throw new ArgumentOutOfRangeException("level", level, "The level of recursion must be greater than 0"); } if (level == 1) return _functionToRecurse; return _GetXLevel(level - 1, _functionToRecurse); } private Func<T, T> _GetXLevel(int level, Func<T, T> prevFunc) { if (level == 1) return y => prevFunc(_functionToRecurse(y)); return _GetXLevel(level - 1, y => prevFunc(_functionToRecurse(y))); } } Conclusion The great thing about this class, is that it can be used with any function with same input/output parameters.  I strived to find an implementation that I found clean and useful, and I finally settled on this.  If you have feedback – good or bad, I would love to hear it!

    Read the article

  • Hosting and consuming WCF services without configuration files

    - by martinsj
    In this post, I'll demonstrate how to configure both the host and the client in code without the need for configuring services i the <system.serviceModel> section of the config-file. In fact, you don't need a  <system.serviceModel> section at all. What you'll do need (and want) sometimes, is the Uri of the service in the configuration file. Configuring the Uri of the the service is actually only needed for the client or when self-hosting, not when hosting in IIS. So, exactly What do we need to configure? The binding type and the binding constraints The metadata behavior Debug behavior You can of course configure even more, and even more if you want to, WCF is after all the king of configuration… As an example I'll be hosting and consuming a service that removes most of the default constraints for WCF-services, using a BasicHttpBinding. Of course, in regards to security, it is probably better to have some constraints on the server, but this is only a demonstration. The ServerConfig class in the code beneath is a static helper class that will be used in the examples. In this post, I’ll be using this helper-class for all configuration, for both the server and the client. In WCF, the  client and the server have both their own WCF-configuration. With this piece of code, they will be sharing the same configuration. 1: public static class ServiceConfig 2: { 3: public static Binding DefaultBinding 4: { 5: get 6: { 7: var binding = new BasicHttpBinding(); 8: Configure(binding); 9: return binding; 10: } 11: } 12:  13: public static void Configure(HttpBindingBase binding) 14: { 15: if (binding == null) 16: { 17: throw new ArgumentException("Argument 'binding' cannot be null. Cannot configure binding."); 18: } 19:  20: binding.SendTimeout = new TimeSpan(0, 0, 30, 0); // 30 minute timeout 21: binding.MaxBufferSize = Int32.MaxValue; 22: binding.MaxBufferPoolSize = 2147483647; 23: binding.MaxReceivedMessageSize = Int32.MaxValue; 24: binding.ReaderQuotas.MaxArrayLength = Int32.MaxValue; 25: binding.ReaderQuotas.MaxBytesPerRead = Int32.MaxValue; 26: binding.ReaderQuotas.MaxDepth = Int32.MaxValue; 27: binding.ReaderQuotas.MaxNameTableCharCount = Int32.MaxValue; 28: binding.ReaderQuotas.MaxStringContentLength = Int32.MaxValue; 29: } 30:  31: public static ServiceMetadataBehavior ServiceMetadataBehavior 32: { 33: get 34: { 35: return new ServiceMetadataBehavior 36: { 37: HttpGetEnabled = true, 38: MetadataExporter = {PolicyVersion = PolicyVersion.Policy15} 39: }; 40: } 41: } 42:  43: public static ServiceDebugBehavior ServiceDebugBehavior 44: { 45: get 46: { 47: var smb = new ServiceDebugBehavior(); 48: Configure(smb); 49: return smb; 50: } 51: } 52:  53:  54: public static void Configure(ServiceDebugBehavior behavior) 55: { 56: if (behavior == null) 57: { 58: throw new ArgumentException("Argument 'behavior' cannot be null. Cannot configure debug behavior."); 59: } 60: 61: behavior.IncludeExceptionDetailInFaults = true; 62: } 63: } Configuring the server There are basically two ways to host a WCF service, in IIS and self-hosting. When hosting a WCF service in a production environment using SOA architecture, you'll be most likely hosting it in IIS. When testing the service in integration tests, it's very handy to be able to self-host services in the unit-tests. In fact, you can share the the WCF configuration for self-hosted services and services hosted in IIS. And that is exactly what you want to do, testing the same configurations for test and production environments.   Configuring when Self-hosting When self-hosting, in order to start the service, you'll have to instantiate the ServiceHost class, configure the  service and open it. 1: // Create the service-host. 2: var host = new ServiceHost(typeof(MyService), endpoint); 3:  4: // Configure the binding 5: host.AddServiceEndpoint(typeof(IMyService), ServiceConfig.DefaultBinding, endpoint); 6:  7: // Configure metadata behavior 8: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 9:  10: // Configure debgug behavior 11: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 12: 13: // Start listening to the service 14: host.Open(); 15:  Configuring when hosting in IIS When you create a WCF service application with the wizard in Visual Studio, you'll end up with bits and pieces of code in order to get the service running: Svc-file with codebehind. A interface to the service Web.config In order to get rid of the configuration in the <system.serviceModel> section, which the wizard has generated for us, we must tell the service that we have a factory that will create the service for us. We do this by changing the markup for the svc-file: 1: <%@ ServiceHost Language="C#" Debug="true" Service="Namespace.MyService" Factory="Namespace.ServiceHostFactory" %> The markup tells IIS that we have a factory called ServiceHostFactory for this service. The service factory has a method we can override which will be called when someone asks IIS for the service. There are overloads we can override: 1: System.ServiceModel.ServiceHostBase CreateServiceHost(string constructorString, Uri[] baseAddresses) 2: System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 3:  In this example, we'll be using the last one, so our implementation looks like this: 1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3:  4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12:  1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3: 4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12: As you can see, we are using the same configuration helper we used when self-hosting. Now, when you have a factory, the <system.serviceModel> section of the configuration can be removed, because the section will be ignored when the service has a custom factory. If you want to configure something else in the config-file, one could configure in some other section.   Configuring the client Microsoft has helpfully created a ChannelFactory class in order to create a proxy client. When using this approach, you don't have generate those awfull proxy classes for the client. If you share the contracts with the server in it's own assembly like in the layer diagram under, you can share the same piece of code. The contracts in WCF are the interface to the service and if any, the datacontracts (custom types) the service depends on. Using the ChannelFactory with our configuration helper-class is very simple: 1: var identity = EndpointIdentity.CreateDnsIdentity("localhost"); 2: var endpointAddress = new EndpointAddress(endPoint, identity); 3: var factory = new ChannelFactory<IMyService>(DeployServiceConfig.DefaultBinding, endpointAddress); 4: using (var myService = new factory.CreateChannel()) 5: { 6: myService.Hello(); 7: } 8: factory.Close();   Happy configuration!

    Read the article

  • Hibernate Lazy init exception in spring scheduled job

    - by Noam Nevo
    I have a spring scheduled job (@Scheduled) that sends emails from my system according to a list of recipients in the DB. This method is annotated with the @Scheduled annotation and it invokes a method from another interface, the method in the interface is annotated with the @Transactional annotation. Now, when i invoke the scheduled method manually, it works perfectly. But when the method is invoked by spring scheduler i get the LazyInitFailed exception in the method implementing the said interface. What am I doing wrong? code: The scheduled method: @Component public class ScheduledReportsSender { public static final int MAX_RETIRES = 3; public static final long HALF_HOUR = 1000 * 60 * 30; @Autowired IScheduledReportDAO scheduledReportDAO; @Autowired IDataService dataService; @Autowired IErrorService errorService; @Scheduled(cron = "0 0 3 ? * *") // every day at 2:10AM public void runDailyReports() { // get all daily reports List<ScheduledReport> scheduledReports = scheduledReportDAO.getDaily(); sendScheduledReports(scheduledReports); } private void sendScheduledReports(List<ScheduledReport> scheduledReports) { if(scheduledReports.size()<1) { return; } //check if data flow ended its process by checking the report_last_updated table in dwh int reportTimeId = scheduledReportDAO.getReportTimeId(); String todayTimeId = DateUtils.getTimeid(DateUtils.getTodayDate()); int yesterdayTimeId = Integer.parseInt(DateUtils.addDaysSafe(todayTimeId, -1)); int counter = 0; //wait for time id to update from the daily flow while (reportTimeId != yesterdayTimeId && counter < MAX_RETIRES) { errorService.logException("Daily report sender, data not ready. Will try again in one hour.", null, null, null); try { Thread.sleep(HALF_HOUR); } catch (InterruptedException ignore) {} reportTimeId = scheduledReportDAO.getReportTimeId(); counter++; } if (counter == MAX_RETIRES) { MarketplaceServiceException mse = new MarketplaceServiceException(); mse.setMessage("Data flow not done for today, reports are not sent."); throw mse; } // get updated timeid updateTimeId(); for (ScheduledReport scheduledReport : scheduledReports) { dataService.generateScheduledReport(scheduledReport); } } } The Invoked interface: public interface IDataService { @Transactional public void generateScheduledReport(ScheduledReport scheduledReport); } The implementation (up to the line of the exception): @Service public class DataService implements IDataService { public void generateScheduledReport(ScheduledReport scheduledReport) { // if no recipients or no export type - return if(scheduledReport.getRecipients()==null || scheduledReport.getRecipients().size()==0 || scheduledReport.getExportType() == null) { return; } } } Stack trace: ERROR: 2012-09-01 03:30:00,365 [Scheduler-15] LazyInitializationException.<init>(42) | failed to lazily initialize a collection of role: com.x.model.scheduledReports.ScheduledReport.recipients, no session or session was closed org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.x.model.scheduledReports.ScheduledReport.recipients, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:383) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:375) at org.hibernate.collection.AbstractPersistentCollection.readSize(AbstractPersistentCollection.java:122) at org.hibernate.collection.PersistentBag.size(PersistentBag.java:248) at com.x.service.DataService.generateScheduledReport(DataService.java:219) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:309) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202) at $Proxy208.generateScheduledReport(Unknown Source) at com.x.scheduledJobs.ScheduledReportsSender.sendScheduledReports(ScheduledReportsSender.java:85) at com.x.scheduledJobs.ScheduledReportsSender.runDailyReports(ScheduledReportsSender.java:38) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.springframework.util.MethodInvoker.invoke(MethodInvoker.java:273) at org.springframework.scheduling.support.MethodInvokingRunnable.run(MethodInvokingRunnable.java:65) at org.springframework.scheduling.support.DelegatingErrorHandlingRunnable.run(DelegatingErrorHandlingRunnable.java:51) at org.springframework.scheduling.concurrent.ReschedulingRunnable.run(ReschedulingRunnable.java:81) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) at java.util.concurrent.FutureTask.run(FutureTask.java:166) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:636) ERROR: 2012-09-01 03:30:00,366 [Scheduler-15] MethodInvokingRunnable.run(68) | Invocation of method 'runDailyReports' on target class [class com.x.scheduledJobs.ScheduledReportsSender] failed org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.x.model.scheduledReports.ScheduledReport.recipients, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:383) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:375) at org.hibernate.collection.AbstractPersistentCollection.readSize(AbstractPersistentCollection.java:122) at org.hibernate.collection.PersistentBag.size(PersistentBag.java:248) at com.x.service.DataService.generateScheduledReport(DataService.java:219) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:309) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202) at $Proxy208.generateScheduledReport(Unknown Source) at com.x.scheduledJobs.ScheduledReportsSender.sendScheduledReports(ScheduledReportsSender.java:85) at com.x.scheduledJobs.ScheduledReportsSender.runDailyReports(ScheduledReportsSender.java:38) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.springframework.util.MethodInvoker.invoke(MethodInvoker.java:273) at org.springframework.scheduling.support.MethodInvokingRunnable.run(MethodInvokingRunnable.java:65) at org.springframework.scheduling.support.DelegatingErrorHandlingRunnable.run(DelegatingErrorHandlingRunnable.java:51) at org.springframework.scheduling.concurrent.ReschedulingRunnable.run(ReschedulingRunnable.java:81) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) at java.util.concurrent.FutureTask.run(FutureTask.java:166) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.access$101(ScheduledThreadPoolExecutor.java:165) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:266) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:636)

    Read the article

  • Saving in mongoDb with Mongoose, unexpected elements saved

    - by guiomie
    When I write in my mongoDB with mongoose the operation is treated with success, my document is saved, but there is also all kind of weird other sutff written down. It seems to be mongoose code. What could cause this? I add stuff in a specific array with: resultReference.ref[arrayLocation].allEvents.push(theEvent); {id: 11, allEvents: [] } is the structure of a ref element, and I push theEvent in the allEvents array. I then resultReference.save() I use express, mongoose and mongoHQ for database. I tried on a local mongo server, and this annoyance is still there. I've print in my console the document to write before save() and non of this weird code is there. { id 11 allEvents [ 0 { _events { maxListeners 0 } _doc { _id {"$oid": "4eb87834f54944e263000003"} title "Test" allDay false start 2011-11-10 13:00:00 UTC end 2011-11-10 15:00:00 UTC url "/test/4eb87834f54944e263000002" color "#99CCFF" ref "4eb87834f54944e263000002" } _activePaths { paths { title "modify" allDay "modify" start "modify" end "modify" url "modify" color "modify" ref "modify" } states { init { } modify { title true allDay true start true end true url true color true ref true } require { } } stateNames [ 0 "require" 1 "modify" 2 "init" ] } _saveError null _validationError null isNew true _pres { save [ 0 function (next) { // we keep the error semaphore to make sure we don't // call `save` unnecessarily (we only need 1 error) var subdocs = 0 , error = false , self = this; var arrays = this._activePaths .map('init', 'modify', function (i) { return self.getValue(i); }) .filter(function (val) { return (val && val instanceof DocumentArray && val.length); }); if (!arrays.length) return next(); arrays.forEach(function (array) { subdocs += array.length; array.forEach(function (value) { if (!error) value.save(function (err) { if (!error) { if (err) { error = true; next(err); } else --subdocs || next(); } }); }); }); } 1 "function checkForExistingErrors(next) { if (self._saveError){ next(self._saveError); self._saveError = null; } else { next(); } }" 2 "function validation(next) { return self.validate.call(self, next); }" ] } _posts { save [ ] } save function () { var self = this , hookArgs // arguments eventually passed to the hook - are mutable , lastArg = arguments[arguments.length-1] , pres = this._pres[name] , posts = this._posts[name] , _total = pres.length , _current = -1 , _asyncsLeft = proto[name].numAsyncPres , _next = function () { if (arguments[0] instanceof Error) { return handleError(arguments[0]); } var _args = Array.prototype.slice.call(arguments) , currPre , preArgs; if (_args.length && !(arguments[0] === null && typeof lastArg === 'function')) hookArgs = _args; if (++_current < _total) { currPre = pres[_current] if (currPre.isAsync && currPre.length < 2) throw new Error("Your pre must have next and done arguments -- e.g., function (next, done, ...)"); if (currPre.length < 1) throw new Error("Your pre must have a next argument -- e.g., function (next, ...)"); preArgs = (currPre.isAsync ? [once(_next), once(_asyncsDone)] : [once(_next)]).concat(hookArgs); return currPre.apply(self, preArgs); } else if (!proto[name].numAsyncPres) { return _done.apply(self, hookArgs); } } , _done = function () { var args_ = Array.prototype.slice.call(arguments) , ret, total_, current_, next_, done_, postArgs; if (_current === _total) { ret = fn.apply(self, args_); total_ = posts.length; current_ = -1; next_ = function () { if (arguments[0] instanceof Error) { return handleError(arguments[0]); } var args_ = Array.prototype.slice.call(arguments, 1) , currPost , postArgs; if (args_.length) hookArgs = args_; if (++current_ < total_) { currPost = posts[current_] if (currPost.length < 1) throw new Error("Your post must have a next argument -- e.g., function (next, ...)"); postArgs = [once(next_)].concat(hookArgs); return currPost.apply(self, postArgs); } }; if (total_) return next_(); return ret; } }; if (_asyncsLeft) { function _asyncsDone (err) { if (err && err instanceof Error) { return handleError(err); } --_asyncsLeft || _done.apply(self, hookArgs); } } function handleError (err) { if ('function' == typeof lastArg) return lastArg(err); if (errorCb) return errorCb.call(self, err); throw err; } return _next.apply(this, arguments); } errors null } ] } ]

    Read the article

  • context.getContextResolved appliaction stopped - begginner in java

    - by Szymad
    I have a problem with my app. I'm trying to execute query, but app stops every time. This error occurs while trying to execute query. I'm learing from Android Pro 3 book, but code presented in this book is deprecated. package com.example.contactsabuout; import android.net.Uri; import android.os.Bundle; import android.provider.Contacts; import android.provider.ContactsContract; import android.app.Activity; import android.database.Cursor; import android.util.Log; import android.content.Context; import android.view.Menu; import android.view.View; import android.widget.TextView; public class MainActivity extends Activity { private static Context context; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); MainActivity.context = getApplicationContext(); Log.v("INFO", "Completed: onCreate."); } public static Context getAppContext() { return MainActivity.context; } public void doQuery(View view) { Uri peopleBaseUri = ContactsContract.Contacts.CONTENT_URI; Log.v("II","Button clicked."); Log.v("II", "Uri for ContactsContract.Contacts: " + peopleBaseUri); Context context = getAppContext(); Log.v("II", "Got context: " + context); Cursor cur; Log.v("II", "Created cursor: cur"); cur = context.getContentResolver().query(peopleBaseUri, null, null, null, null); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.activity_main, menu); return true; } } FROM LogCat 10-28 17:45:02.513: V/INFO(4677): Completed: onCreate. 10-28 17:45:02.613: D/libEGL(4677): loaded /system/lib/egl/libGLES_android.so 10-28 17:45:02.653: D/libEGL(4677): loaded /system/lib/egl/libEGL_adreno200.so 10-28 17:45:02.723: D/libEGL(4677): loaded /system/lib/egl/libGLESv1_CM_adreno200.so 10-28 17:45:02.723: D/libEGL(4677): loaded /system/lib/egl/libGLESv2_adreno200.so 10-28 17:45:03.014: I/Adreno200-EGLSUB(4677): <ConfigWindowMatch:2078>: Format RGBA_8888. 10-28 17:45:03.054: D/OpenGLRenderer(4677): Enabling debug mode 0 10-28 17:45:03.254: D/OpenGLRenderer(4677): has fontRender patch 10-28 17:45:03.274: D/OpenGLRenderer(4677): has fontRender patch 10-28 17:45:12.873: V/II(4677): Button clicked. 10-28 17:45:12.873: V/II(4677): Uri for ContactsContract.Contacts: content://com.android.contacts/contacts, rest will be null 10-28 17:45:12.873: V/II(4677): Got context: android.app.Application@40d83d90 10-28 17:45:12.873: V/II(4677): Created cursor: cur 10-28 17:45:12.933: D/AndroidRuntime(4677): Shutting down VM 10-28 17:45:12.933: W/dalvikvm(4677): threadid=1: thread exiting with uncaught exception (group=0x40aaf228) 10-28 17:45:12.953: E/AndroidRuntime(4677): FATAL EXCEPTION: main 10-28 17:45:12.953: E/AndroidRuntime(4677): java.lang.IllegalStateException: Could not execute method of the activity 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.view.View$1.onClick(View.java:3071) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.view.View.performClick(View.java:3538) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.view.View$PerformClick.run(View.java:14330) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.os.Handler.handleCallback(Handler.java:608) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.os.Handler.dispatchMessage(Handler.java:92) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.os.Looper.loop(Looper.java:156) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.app.ActivityThread.main(ActivityThread.java:4977) 10-28 17:45:12.953: E/AndroidRuntime(4677): at java.lang.reflect.Method.invokeNative(Native Method) 10-28 17:45:12.953: E/AndroidRuntime(4677): at java.lang.reflect.Method.invoke(Method.java:511) 10-28 17:45:12.953: E/AndroidRuntime(4677): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:784) 10-28 17:45:12.953: E/AndroidRuntime(4677): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:551) 10-28 17:45:12.953: E/AndroidRuntime(4677): at dalvik.system.NativeStart.main(Native Method) 10-28 17:45:12.953: E/AndroidRuntime(4677): Caused by: java.lang.reflect.InvocationTargetException 10-28 17:45:12.953: E/AndroidRuntime(4677): at java.lang.reflect.Method.invokeNative(Native Method) 10-28 17:45:12.953: E/AndroidRuntime(4677): at java.lang.reflect.Method.invoke(Method.java:511) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.view.View$1.onClick(View.java:3066) 10-28 17:45:12.953: E/AndroidRuntime(4677): ... 11 more 10-28 17:45:12.953: E/AndroidRuntime(4677): Caused by: java.lang.SecurityException: Permission Denial: reading com.android.providers.contacts.HtcContactsProvider2 uri content://com.android.contacts/contacts from pid=4677, uid=10155 requires android.permission.READ_CONTACTS 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.os.Parcel.readException(Parcel.java:1332) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.database.DatabaseUtils.readExceptionFromParcel(DatabaseUtils.java:182) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.database.DatabaseUtils.readExceptionFromParcel(DatabaseUtils.java:136) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.content.ContentProviderProxy.query(ContentProviderNative.java:406) 10-28 17:45:12.953: E/AndroidRuntime(4677): at android.content.ContentResolver.query(ContentResolver.java:315) 10-28 17:45:12.953: E/AndroidRuntime(4677): at com.example.contactsabuout.MainActivity.doQuery(MainActivity.java:47) 10-28 17:45:12.953: E/AndroidRuntime(4677): ... 14 more I'm trying to learn android.

    Read the article

  • Code Contracts: How they look after compiling?

    - by DigiMortal
    When you are using new tools that make also something at code level then it is good idea to check out what additions are made to code during compilation. Code contracts have simple syntax when we are writing code at Visual Studio but what happens after compilation? Are our methods same as they look in code or are they different after compilation? In this posting I will show you how code contracts look after compiling. In my previous examples about code contracts I used randomizer class with method called GetRandomFromRangeContracted. public int GetRandomFromRangeContracted(int min, int max) {     Contract.Requires<ArgumentOutOfRangeException>(         min < max,         "Min must be less than max"     );       Contract.Ensures(         Contract.Result<int>() >= min &&         Contract.Result<int>() <= max,         "Return value is out of range"     );       return _generator.Next(min, max); } Okay, it is nice to dream about similar code when we open our assembly with Reflector and disassemble it. But… this time we have something interesting. While reading this code don’t feel uncomfortable about the names of variables. This is disassembled code. .NET Framework internally allows these names. It is our compilators that doesn’t accept them when we are building our code. public int GetRandomFromRangeContracted(int min, int max) {     int Contract.Old(min);     int Contract.Old(max);     if (__ContractsRuntime.insideContractEvaluation <= 4)     {         try         {             __ContractsRuntime.insideContractEvaluation++;             __ContractsRuntime.Requires<ArgumentOutOfRangeException>(                min < max,                "Min must be less than max", "min < max");         }         finally         {             __ContractsRuntime.insideContractEvaluation--;         }     }     try     {         Contract.Old(min) = min;     }     catch (Exception exception1)     {         if (exception1 == null)         {             throw;         }     }     try     {         Contract.Old(max) = max;         catch (Exception exception2)     {         if (exception2 == null)         {             throw;         }     }     int CS$1$0000 = this._generator.Next(min, max);     int Contract.Result<int>() = CS$1$0000;     if (__ContractsRuntime.insideContractEvaluation <= 4)     {         try         {             __ContractsRuntime.insideContractEvaluation++;             __ContractsRuntime.Ensures(                (Contract.Result<int>() >= Contract.Old(min)) &&                (Contract.Result<int>() <= Contract.Old(max)),                "Return value is out of range",                "Contract.Result<int>() >= min && Contract.Result<int>() <= max");         }         finally         {             __ContractsRuntime.insideContractEvaluation--;         }     }     return Contract.Result<int>(); } As we can see then contracts are not simply if-then-else checks and exceptions throwing. We can see that there is counter that is incremented before checks and decremented after these whatever the result of check was. One thing that is annoying for me are null checks for exception1 and exception2. Is there really some situation possible when null is thrown instead of some instance that is Exception or that inherits from exception? Conclusion Code contracts are more complex mechanism that it seems when we look at it on our code level. Internally there are done more things than we know. I don’t say it is wrong, it is just good to know how our code looks after compiling. Looking at this example it is sure we need also performance tests for contracted code to see how heavy is their impact to system performance when we run code that makes heavy use of code contracts.

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >