Search Results

Search found 5195 results on 208 pages for 'shift reduce conflict'.

Page 204/208 | < Previous Page | 200 201 202 203 204 205 206 207 208  | Next Page >

• OpenGL texture shifted somewhat to the left when applied to a quad

  - by user308226

  I'm a bit new to OpenGL and I've been having a problem with using textures. The texture seems to load fine, but when I run the program, the texture displays shifted a couple pixels to the left, with the section cut off by the shift appearing on the right side. I don't know if the problem here is in the my TGA loader or if it's the way I'm applying the texture to the quad. Here is the loader: #include "texture.h" #include <iostream> GLubyte uncompressedheader[12] = {0,0, 2,0,0,0,0,0,0,0,0,0}; GLubyte compressedheader[12] = {0,0,10,0,0,0,0,0,0,0,0,0}; TGA::TGA() { } //Private loading function called by LoadTGA. Loads uncompressed TGA files //Returns: TRUE on success, FALSE on failure bool TGA::LoadCompressedTGA(char *filename,ifstream &texturestream) { return false; } bool TGA::LoadUncompressedTGA(char *filename,ifstream &texturestream) { cout << "G position status:" << texturestream.tellg() << endl; texturestream.read((char*)header, sizeof(header)); //read 6 bytes into the file to get the tga header width = (GLuint)header[1] * 256 + (GLuint)header[0]; //read and calculate width and save height = (GLuint)header[3] * 256 + (GLuint)header[2]; //read and calculate height and save bpp = (GLuint)header[4]; //read bpp and save cout << bpp << endl; if((width <= 0) || (height <= 0) || ((bpp != 24) && (bpp !=32))) //check to make sure the height, width, and bpp are valid { return false; } if(bpp == 24) { type = GL_RGB; } else { type = GL_RGBA; } imagesize = ((bpp/8) * width * height); //determine size in bytes of the image cout << imagesize << endl; imagedata = new GLubyte[imagesize]; //allocate memory for our imagedata variable texturestream.read((char*)imagedata,imagesize); //read according the the size of the image and save into imagedata for(GLuint cswap = 0; cswap < (GLuint)imagesize; cswap += (bpp/8)) //loop through and reverse the tga's BGR format to RGB { imagedata[cswap] ^= imagedata[cswap+2] ^= //1st Byte XOR 3rd Byte XOR 1st Byte XOR 3rd Byte imagedata[cswap] ^= imagedata[cswap+2]; } texturestream.close(); //close ifstream because we're done with it cout << "image loaded" << endl; glGenTextures(1, &texID); // Generate OpenGL texture IDs glBindTexture(GL_TEXTURE_2D, texID); // Bind Our Texture glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); // Linear Filtered glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, type, width, height, 0, type, GL_UNSIGNED_BYTE, imagedata); delete imagedata; return true; } //Public loading function for TGA images. Opens TGA file and determines //its type, if any, then loads it and calls the appropriate function. //Returns: TRUE on success, FALSE on failure bool TGA::loadTGA(char *filename) { cout << width << endl; ifstream texturestream; texturestream.open(filename,ios::binary); texturestream.read((char*)header,sizeof(header)); //read 6 bytes into the file, its the header. //if it matches the uncompressed header's first 6 bytes, load it as uncompressed LoadUncompressedTGA(filename,texturestream); return true; } GLubyte* TGA::getImageData() { return imagedata; } GLuint& TGA::getTexID() { return texID; } And here's the quad: void Square::show() { glEnable(GL_TEXTURE_2D); glBindTexture(GL_TEXTURE_2D, texture.texID); //Move to offset glTranslatef( x, y, 0 ); //Start quad glBegin( GL_QUADS ); //Set color to white glColor4f( 1.0, 1.0, 1.0, 1.0 ); //Draw square glTexCoord2f(0.0f, 0.0f); glVertex3f( 0, 0, 0 ); glTexCoord2f(1.0f, 0.0f); glVertex3f( SQUARE_WIDTH, 0, 0 ); glTexCoord2f(1.0f, 1.0f); glVertex3f( SQUARE_WIDTH, SQUARE_HEIGHT, 0 ); glTexCoord2f(0.0f, 1.0f); glVertex3f( 0, SQUARE_HEIGHT, 0 ); //End quad glEnd(); //Reset glLoadIdentity(); }

  Read the article

• Image loader cant load my live image url

  - by Bindhu

  In my application i need to load the images in list view, when using locale(ip ported url) then no problem all images are loading properly, But when using live url then the images are not loading, My image loader class: public class ImageLoader { MemoryCache memoryCache = new MemoryCache(); FileCache fileCache; private Map<ImageView, String> imageViews = Collections .synchronizedMap(new WeakHashMap<ImageView, String>()); ExecutorService executorService; public ImageLoader(Context context) { fileCache = new FileCache(context); executorService = Executors.newFixedThreadPool(5); } final int stub_id = R.drawable.appointeesample; public void DisplayImage(String url, ImageView imageView) { imageViews.put(imageView, url); Bitmap bitmap = memoryCache.get(url); if (bitmap != null) imageView.setImageBitmap(bitmap); else { Log.d("stub", "stub" + stub_id); queuePhoto(url, imageView); imageView.setImageResource(stub_id); } } private void queuePhoto(String url, ImageView imageView) { PhotoToLoad p = new PhotoToLoad(url, imageView); executorService.submit(new PhotosLoader(p)); } private Bitmap getBitmap(String url) { File f = fileCache.getFile(url); // from SD cache Bitmap b = decodeFile(f); if (b != null) return b; // from web try { Bitmap bitmap = null; URL imageUrl = new URL(url); HttpURLConnection conn = (HttpURLConnection) imageUrl .openConnection(); conn.setConnectTimeout(30000); conn.setReadTimeout(30000); conn.setInstanceFollowRedirects(true); InputStream is = conn.getInputStream(); BufferedInputStream bis = new BufferedInputStream(is, 81960); BitmapFactory.Options opts = new BitmapFactory.Options(); opts.inJustDecodeBounds = true; OutputStream os = new FileOutputStream(f); Utils.CopyStream(bis, os); os.close(); bitmap = decodeFile(f); Log.d("bitmap", "Bit map" + bitmap); return bitmap; } catch (Exception ex) { ex.printStackTrace(); return null; } } // decodes image and scales it to reduce memory consumption private Bitmap decodeFile(File f) { try { try { BitmapFactory.Options o = new BitmapFactory.Options(); o.inJustDecodeBounds = true; BitmapFactory.decodeStream(new FileInputStream(f), null, o); final int REQUIRED_SIZE = 200; int scale = 1; while (o.outWidth / scale / 2 >= REQUIRED_SIZE && o.outHeight / scale / 2 >= REQUIRED_SIZE) scale *= 2; BitmapFactory.Options o2 = new BitmapFactory.Options(); o2.inSampleSize = scale; return BitmapFactory.decodeStream(new FileInputStream(f), null, o2); } catch (FileNotFoundException e) { } finally { System.gc(); } return null; } catch (Exception e) { } return null; } // Task for the queue private class PhotoToLoad { public String url; public ImageView imageView; public PhotoToLoad(String u, ImageView i) { url = u; imageView = i; } } class PhotosLoader implements Runnable { PhotoToLoad photoToLoad; PhotosLoader(PhotoToLoad photoToLoad) { this.photoToLoad = photoToLoad; } @Override public void run() { if (imageViewReused(photoToLoad)) return; Bitmap bmp = getBitmap(photoToLoad.url); memoryCache.put(photoToLoad.url, bmp); if (imageViewReused(photoToLoad)) return; BitmapDisplayer bd = new BitmapDisplayer(bmp, photoToLoad); Activity a = (Activity) photoToLoad.imageView.getContext(); a.runOnUiThread(bd); } } boolean imageViewReused(PhotoToLoad photoToLoad) { String tag = imageViews.get(photoToLoad.imageView); if (tag == null || !tag.equals(photoToLoad.url)) return true; return false; } // Used to display bitmap in the UI thread class BitmapDisplayer implements Runnable { Bitmap bitmap; PhotoToLoad photoToLoad; public BitmapDisplayer(Bitmap b, PhotoToLoad p) { bitmap = b; photoToLoad = p; } public void run() { if (imageViewReused(photoToLoad)) return; if (bitmap != null) photoToLoad.imageView.setImageBitmap(bitmap); else photoToLoad.imageView.setImageResource(stub_id); } } public void clearCache() { memoryCache.clear(); fileCache.clear(); } My Live Image url for Example: https://goappointed.com/images_upload/3330Torana_Logo.JPG I have referred google but no solution is working, Thanks a lot in advance.

  Read the article

• URL Rewrite – Multiple domains under one site. Part II

  - by OWScott

  I believe I have it … I’ve been meaning to put together the ultimate outgoing rule for hosting multiple domains under one site.  I finally sat down this week and setup a few test cases, and created one rule to rule them all.  In Part I of this two part series, I covered the incoming rule necessary to host a site in a subfolder of a website, while making it appear as if it’s in the root of the site.  Part II won’t work without applying Part I first, so if you haven’t read it, I encourage you to read it now. However, the incoming rule by itself doesn’t address everything.  Here’s the problem … Let’s say that we host www.site2.com in a subfolder called site2, off of masterdomain.com.  This is the same example I used in Part I.   Using an incoming rewrite rule, we are able to make a request to www.site2.com even though the site is really in the /site2 folder.  The gotcha comes with any type of path that ASP.NET generates (I’m sure other scripting technologies could do the same too).  ASP.NET thinks that the path to the root of the site is /site2, but the URL is /.  See the issue?  If ASP.NET generates a path or a redirect for us, it will always add /site2 to the URL.  That results in a path that looks something like www.site2.com/site2.  In Part I, I mentioned that you should add a condition where “{PATH_INFO} ‘does not match’ /site2”.  That allows www.site2.com/site2 and www.site2.com to both function the same.  This allows the site to always work, but if you want to hide /site2 in the URL, you need to take it one step further. One way to address this is in your code.  Ultimately this is the best bet.  Ruslan Yakushev has a great article on a few considerations that you can address in code.  I recommend giving that serious consideration.  Additionally, if you have upgraded to ASP.NET 3.5 SP1 or greater, it takes care of some of the references automatically for you. However, what if you inherit an existing application?  Or you can’t easily go through your existing site and make the code changes?  If this applies to you, read on. That’s where URL Rewrite 2.0 comes in.  With URL Rewrite 2.0, you can create an outgoing rule that will remove the /site2 before the page is sent back to the user.  This means that you can take an existing application, host it in a subfolder of your site, and ensure that the URL never reveals that it’s in a subfolder. Performance Considerations Performance overhead is something to be mindful of.  These outbound rules aren’t simply changing the server variables.  The first rule I’ll cover below needs to parse the HTML body and pull out the path (i.e. /site2) on the way through.  This will add overhead, possibly significant if you have large pages and a busy site.  In other words, your mileage may vary and you may need to test to see the impact that these rules have.  Don’t worry too much though.  For many sites, the performance impact is negligible. So, how do we do it? Creating the Outgoing Rule There are really two things to keep in mind.  First, ASP.NET applications frequently generate a URL that adds the /site2 back into the URL.  In addition to URLs, they can be in form elements, img elements and the like.  The goal is to find all of those situations and rewrite it on the way out.  Let’s call this the ‘URL problem’. Second, and similarly, ASP.NET can send a LOCATION redirect that causes a redirect back to another page.  Again, ASP.NET isn’t aware of the different URL and it will add the /site2 to the redirect.  Form Authentication is a good example on when this occurs.  Try to password protect a site running from a subfolder using forms auth and you’ll quickly find that the URL becomes www.site2.com/site2 again.  Let’s term this the ‘redirect problem’. Solving the URL Problem – Outgoing Rule #1 Let’s create a rule that removes the /site2 from any URL.  We want to remove it from relative URLs like /site2/something, or absolute URLs like http://www.site2.com/site2/something.  Most URLs that ASP.NET creates will be relative URLs, but I figure that there may be some applications that piece together a full URL, so we might as well expect that situation. Let’s get started.  First, create a new outbound rule.  You can create the rule within the /site2 folder which will reduce the performance impact of the rule.  Just a reminder that incoming rules for this situation won’t work in a subfolder … but outgoing rules will. Give it a name that makes sense to you, for example “Outgoing – URL paths”. Precondition.  If you place the rule in the subfolder, it will only run for that site and folder, so there isn’t need for a precondition.  Run it for all requests.  If you place it in the root of the site, you may want to create a precondition for HTTP_HOST = ^(www\.)?site2\.com$. For the Match section, there are a few things to consider.  For performance reasons, it’s best to match the least amount of elements that you need to accomplish the task.  For my test cases, I just needed to rewrite the <a /> tag, but you may need to rewrite any number of HTML elements.  Note that as long as you have the exclude /site2 rule in your incoming rule as I described in Part I, some elements that don’t show their URL—like your images—will work without removing the /site2 from them.  That reduces the processing needed for this rule. Leave the “matching scope” at “Response” and choose the elements that you want to change. Set the pattern to “^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)”.  Make sure to replace ‘site2’ with your subfolder name in both places.  Yes, I realize this is a pretty messy looking rule, but it handles a few situations.  This rule will handle the following situations correctly: Original Rewritten using {R:1}{R:2} http://www.site2.com/site2/default.aspx http://www.site2.com/default.aspx http://www.site2.com/folder1/site2/default.aspx Won’t rewrite since it’s a sub-sub folder /site2/default.aspx /default.aspx site2/default.aspx /default.aspx /folder1/site2/default.aspx Won’t rewrite since it’s a sub-sub folder. For the conditions section, you can leave that be. Finally, for the rule, set the Action Type to “Rewrite” and set the Value to “{R:1}{R:2}”.  The {R:1} and {R:2} are back references to the sections within parentheses.  In other words, in http://domain.com/site2/something, {R:1} will be http://domain.com and {R:2} will be /something. If you view your rule from your web.config file (or applicationHost.config if it’s a global rule), it should look like this: <rule name="Outgoing - URL paths" enabled="true"> <match filterByTags="A" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> Solving the Redirect Problem Outgoing Rule #2 The second issue that we can run into is with a client-side redirect.  This is triggered by a LOCATION response header that is sent to the client.  Forms authentication is a common example.  To reproduce this, password protect your subfolder and watch how it redirects and adds the subfolder path back in. Notice in my test case the extra paths: http://site2.com/site2/login.aspx?ReturnUrl=%2fsite2%2fdefault.aspx I want to remove /site2 from both the URL and the ReturnUrl querystring value.  For semi-readability, let’s do this in 2 separate rules, one for the URL and one for the querystring. Create a second rule.  As with the previous rule, it can be created in the /site2 subfolder.  In the URL Rewrite wizard, select Outbound rules –> “Blank Rule”. Fill in the following information: Name response_location URL Precondition Don’t set Match: Matching Scope Server Variable Match: Variable Name RESPONSE_LOCATION Match: Pattern ^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*) Conditions Don’t set Action Type Rewrite Action Properties {R:1}{R:2} It should end up like so: <rule name="response_location URL"> <match serverVariable="RESPONSE_LOCATION" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> Outgoing Rule #3 Outgoing Rule #2 only takes care of the URL path, and not the querystring path.  Let’s create one final rule to take care of the path in the querystring to ensure that ReturnUrl=%2fsite2%2fdefault.aspx gets rewritten to ReturnUrl=%2fdefault.aspx. The %2f is the HTML encoding for forward slash (/). Create a rule like the previous one, but with the following settings: Name response_location querystring Precondition Don’t set Match: Matching Scope Server Variable Match: Variable Name RESPONSE_LOCATION Match: Pattern (.*)%2fsite2(.*) Conditions Don’t set Action Type Rewrite Action Properties {R:1}{R:2} The config should look like this: <rule name="response_location querystring"> <match serverVariable="RESPONSE_LOCATION" pattern="(.*)%2fsite2(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> It’s possible to squeeze the last two rules into one, but it gets kind of confusing so I felt that it’s better to show it as two separate rules. Summary With the rules covered in these two parts, we’re able to have a site in a subfolder and make it appear as if it’s in the root of the site.  Not only that, we can overcome automatic redirecting that is caused by ASP.NET, other scripting technologies, and especially existing applications. Following is an example of the incoming and outgoing rules necessary for a site called www.site2.com hosted in a subfolder called /site2.  Remember that the outgoing rules can be placed in the /site2 folder instead of the in the root of the site. <rewrite> <rules> <rule name="site2.com in a subfolder" enabled="true" stopProcessing="true"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^(www\.)?site2\.com$" /> <add input="{PATH_INFO}" pattern="^/site2($|/)" negate="true" /> </conditions> <action type="Rewrite" url="/site2/{R:0}" /> </rule> </rules> <outboundRules> <rule name="Outgoing - URL paths" enabled="true"> <match filterByTags="A" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> <rule name="response_location URL"> <match serverVariable="RESPONSE_LOCATION" pattern="^(?:site2|(.*//[_a-zA-Z0-9-\.]*)?/site2)(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> <rule name="response_location querystring"> <match serverVariable="RESPONSE_LOCATION" pattern="(.*)%2fsite2(.*)" /> <action type="Rewrite" value="{R:1}{R:2}" /> </rule> </outboundRules> </rewrite> If you run into any situations that aren’t caught by these rules, please let me know so I can update this to be as complete as possible. Happy URL Rewriting!

  Read the article

• OpenVPN not connecting

  - by LandArch

  There have been a number of post similar to this, but none seem to satisfy my need. Plus I am a Ubuntu newbie. I followed this tutorial to completely set up OpenVPN on Ubuntu 12.04 server. Here is my server.conf file ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) local 192.168.13.8 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? proto tcp ;proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "/etc/openvpn/ca.crt" cert "/etc/openvpn/server.crt" key "/etc/openvpn/server.key" # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh dh1024.pem # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. ;server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. server-bridge 192.168.13.101 255.255.255.0 192.168.13.105 192.168.13.200 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.13.1 255.255.255.0" push "dhcp-option DNS 192.168.13.201" push "dhcp-option DOMAIN blahblah.dyndns-wiki.com" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. user nobody group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I am using Windows 7 as the Client and set that up accordingly using the OpenVPN GUI. That conf file is as follows: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. blahblah.dyndns-wiki.com 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) user nobody group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\OpenVPN\config\\ca.crt" cert "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.crt" key "C:\\Program Files\OpenVPN\config\\ChadMWade-THINK.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Not sure whats left to do.

  Read the article

• Cold Start

  - by antony.reynolds

  Well we had snow drifts 3ft deep on Saturday so it must be spring time.  In preparation for Spring we decided to move the lawn tractor.  Of course after sitting in the garage all winter it refused to start.  I then come into the office and need to start my 11g SOA Suite installation.  I thought about this and decided my tractor might be cranky but at least I can script the startup of my SOA Suite 11g installation. So with this in mind I created 6 scripts.  I created them for Linux but they should translate to Windows without too many problems.  This is left as an exercise to the reader, note you will have to hardcode more than I did in the Linux scripts and create separate script files for the sqlplus and WLST sections. Order to start things I believe there should be order in all things, especially starting the SOA Suite.  So here is my preferred order. Start Database This is need by EM and the rest of SOA Suite so best to start it before the Admin Server and managed servers. Start Node Manager on all machines This is needed if you want the scripts to work across machines. Start Admin Server Once this is done in theory you can manually stat the managed servers using WebLogic console.  But then you have to wait for console to be available.  Scripting it all is quicker and easier way of starting. Start Managed Servers & Clusters Best to start them one per physical machine at a time to avoid undue load on the machines.  Non-clustered install will have just soa_server1 and bam_serv1 by default.  Clusters will have at least SOA and BAM clusters that can be started as a group or individually.  I have provided scripts for standalone servers, but easy to change them to work with clusters. Starting Database I have provided a very primitive script (available here) to start the database, the listener and the DB console.  The section highlighted in red needs to match your database name. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "#####################" echo "# Starting Database #" echo "#####################" sqlplus / as sysdba <<-EOF startup exit EOF echo "#####################" echo "# Starting Listener #" echo "#####################" lsnrctl start echo "######################" echo "# Starting dbConsole #" echo "######################" emctl start dbconsole read -p "Hit <enter> to continue" Starting SOA Suite My script for starting the SOA Suite (available here) breaks the task down into five sections. Setting the Environment First set up the environment variables.  The variables highlighted in red probably need changing for your environment. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME Starting the Node Manager I start node manager with a nohup to stop it exiting when the script terminates and I redirect the standard output and standard error to a file in a logs directory. cd $DOMAIN_HOME echo "#########################" echo "# Starting Node Manager #" echo "#########################" nohup $WL_HOME/server/bin/startNodeManager.sh >logs/NodeManager.out 2>&1 & Starting the Admin Server I had problems starting the Admin Server from Node Manager so I decided to start it using the command line script.  I again use nohup and redirect output. echo "#########################" echo "# Starting Admin Server #" echo "#########################" nohup ./startWebLogic.sh >logs/AdminServer.out 2>&1 & Starting the Managed Servers I then used WLST (WebLogic Scripting Tool) to start the managed servers.  First I waited for the Admin Server to come up by putting a connect command in a loop.  I could have put the WLST commands into a separate script file but I wanted to reduce the number of files I was using and so used redirected input (here syntax). $ORACLE_HOME/common/bin/wlst.sh <<-EOF import time sleep=time.sleep print "#####################################" print "# Waiting for Admin Server to Start #" print "#####################################" while True:   try:     connect(adminServerName="AdminServer")     break   except:     sleep(10) I then start the SOA server and tell WLST to wait until it is started before returning.  If starting a cluster then the start command would be modified accordingly to start the SOA cluster. print "#######################" print "# Starting SOA Server #" print "#######################" start(name="soa_server1", block="true") I then start the BAM server in the same way as the SOA server. print "#######################" print "# Starting BAM Server #" print "#######################" start(name="bam_server1", block="true") EOF Finally I let people know the servers are up and wait for input in case I am running in a separate window, in which case the result would be lost without the read command. echo "#####################" echo "# SOA Suite Started #" echo "#####################" read -p "Hit <enter> to continue" Stopping the SOA Suite My script for shutting down the SOA Suite (available here)  is basically the reverse of my startup script.  After setting the environment I connect to the Admin Server using WLST and shut down the managed servers and the admin server.  Again the script would need modifying for a cluster. Stopping the Servers If I cannot connect to the Admin Server I try to connect to the node manager, in case the Admin Server is down but the managed servers are up. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME cd $DOMAIN_HOME $MW_HOME/Oracle_SOA/common/bin/wlst.sh <<-EOF try:   print("#############################")   print("# Connecting to AdminServer #")   print("#############################")   connect(username='weblogic',password='welcome1',url='t3://localhost:7001') except:   print "#########################################"   print "#   Unable to connect to Admin Server   #"   print "# Attempting to connect to Node Manager #"   print "#########################################"   nmConnect(domainName=os.getenv("DOMAIN_NAME")) print "#######################" print "# Stopping BAM Server #" print "#######################" shutdown('bam_server1') print "#######################" print "# Stopping SOA Server #" print "#######################" shutdown('soa_server1') print "#########################" print "# Stopping Admin Server #" print "#########################" shutdown('AdminServer') disconnect() nmDisconnect() EOF Stopping the Node Manager I stopped the node manager by searching for the java node manager process using the ps command and then killing that process. echo "#########################" echo "# Stopping Node Manager #" echo "#########################" kill -9 `ps -ef | grep java | grep NodeManager |  awk '{print $2;}'` echo "#####################" echo "# SOA Suite Stopped #" echo "#####################" read -p "Hit <enter> to continue" Stopping the Database Again my script for shutting down the database is the reverse of my start script.  It is available here.  The only change needed might be to the database name. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "######################" echo "# Stopping dbConsole #" echo "######################" emctl stop dbconsole echo "#####################" echo "# Stopping Listener #" echo "#####################" lsnrctl stop echo "#####################" echo "# Stopping Database #" echo "#####################" sqlplus / as sysdba <<-EOF shutdown immediate exit EOF read -p "Hit <enter> to continue" Cleaning Up Cleaning SOA Suite I often run tests and want to clean up all the log files.  The following script (available here) does this for the WebLogic servers in a given domain on a machine.  After setting the domain I just remove all files under the servers logs directories.  It also cleans up the log files I created with my startup scripts.  These scripts could be enhanced to copy off the log files if you needed them but in my test environments I don’t need them and would prefer to reclaim the disk space. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME echo "##########################" echo "# Cleaning SOA Log Files #" echo "##########################" cd $DOMAIN_HOME rm -Rf logs/* servers/*/logs/* read -p "Hit <enter> to continue" Cleaning Database I also created a script to clean up the dump files of an Oracle database instance and also the EM log files (available here).  This relies on the machine name being correct as the EM log files are stored in a directory that is based on the hostname and the Oracle SID. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "#############################" echo "# Cleaning Oracle Log Files #" echo "#############################" rm -Rf $ORACLE_BASE/admin/$ORACLE_SID/*dump/* rm -Rf $ORACLE_HOME/`hostname`_$ORACLE_SID/sysman/log/* read -p "Hit <enter> to continue" Summary Hope you find the above scripts useful.  They certainly stop me hanging around waiting for things to happen on my test machine and make it easy to run a test, change parameters, bounce the SOA Suite and clean the logs between runs so I can see exactly what is happening. Now I need to get that mower started…

  Read the article

• Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

  - by Tarun Arora

  Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples.         After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped.         Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run.   Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test.   Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through.  As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete.      Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’.    Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap   Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You!   Share this post : CodeProject

  Read the article

• ASP.NET and HTML5 Local Storage

  - by Stephen Walther

  My favorite feature of HTML5, hands-down, is HTML5 local storage (aka DOM storage). By taking advantage of HTML5 local storage, you can dramatically improve the performance of your data-driven ASP.NET applications by caching data in the browser persistently. Think of HTML5 local storage like browser cookies, but much better. Like cookies, local storage is persistent. When you add something to browser local storage, it remains there when the user returns to the website (possibly days or months later). Importantly, unlike the cookie storage limitation of 4KB, you can store up to 10 megabytes in HTML5 local storage. Because HTML5 local storage works with the latest versions of all modern browsers (IE, Firefox, Chrome, Safari), you can start taking advantage of this HTML5 feature in your applications right now. Why use HTML5 Local Storage? I use HTML5 Local Storage in the JavaScript Reference application: http://Superexpert.com/JavaScriptReference The JavaScript Reference application is an HTML5 app that provides an interactive reference for all of the syntax elements of JavaScript (You can read more about the application and download the source code for the application here). When you open the application for the first time, all of the entries are transferred from the server to the browser (all 300+ entries). All of the entries are stored in local storage. When you open the application in the future, only changes are transferred from the server to the browser. The benefit of this approach is that the application performs extremely fast. When you click the details link to view details on a particular entry, the entry details appear instantly because all of the entries are stored on the client machine. When you perform key-up searches, by typing in the filter textbox, matching entries are displayed very quickly because the entries are being filtered on the local machine. This approach can have a dramatic effect on the performance of any interactive data-driven web application. Interacting with data on the client is almost always faster than interacting with the same data on the server. Retrieving Data from the Server In the JavaScript Reference application, I use Microsoft WCF Data Services to expose data to the browser. WCF Data Services generates a REST interface for your data automatically. Here are the steps: Create your database tables in Microsoft SQL Server. For example, I created a database named ReferenceDB and a database table named Entities. Use the Entity Framework to generate your data model. For example, I used the Entity Framework to generate a class named ReferenceDBEntities and a class named Entities. Expose your data through WCF Data Services. I added a WCF Data Service to my project and modified the data service class to look like this:   using System.Data.Services; using System.Data.Services.Common; using System.Web; using JavaScriptReference.Models; namespace JavaScriptReference.Services { [System.ServiceModel.ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class EntryService : DataService<ReferenceDBEntities> { // This method is called only once to initialize service-wide policies. public static void InitializeService(DataServiceConfiguration config) { config.UseVerboseErrors = true; config.SetEntitySetAccessRule("*", EntitySetRights.All); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } // Define a change interceptor for the Products entity set. [ChangeInterceptor("Entries")] public void OnChangeEntries(Entry entry, UpdateOperations operations) { if (!HttpContext.Current.Request.IsAuthenticated) { throw new DataServiceException("Cannot update reference unless authenticated."); } } } }     The WCF data service is named EntryService. Notice that it derives from DataService<ReferenceEntitites>. Because it derives from DataService<ReferenceEntities>, the data service exposes the contents of the ReferenceEntitiesDB database. In the code above, I defined a ChangeInterceptor to prevent un-authenticated users from making changes to the database. Anyone can retrieve data through the service, but only authenticated users are allowed to make changes. After you expose data through a WCF Data Service, you can use jQuery to retrieve the data by performing an Ajax call. For example, I am using an Ajax call that looks something like this to retrieve the JavaScript entries from the EntryService.svc data service: $.ajax({ dataType: "json", url: “/Services/EntryService.svc/Entries”, success: function (result) { var data = callback(result["d"]); } });     Notice that you must unwrap the data using result[“d”]. After you unwrap the data, you have a JavaScript array of the entries. I’m transferring all 300+ entries from the server to the client when the application is opened for the first time. In other words, I transfer the entire database from the server to the client, once and only once, when the application is opened for the first time. The data is transferred using JSON. Here is a fragment: { "d" : [ { "__metadata": { "uri": "http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries(1)", "type": "ReferenceDBModel.Entry" }, "Id": 1, "Name": "Global", "Browsers": "ff3_6,ie8,ie9,c8,sf5,es3,es5", "Syntax": "object", "ShortDescription": "Contains global variables and functions", "FullDescription": "<p>\nThe Global object is determined by the host environment. In web browsers, the Global object is the same as the windows object.\n</p>\n<p>\nYou can use the keyword <code>this</code> to refer to the Global object when in the global context (outside of any function).\n</p>\n<p>\nThe Global object holds all global variables and functions. For example, the following code demonstrates that the global <code>movieTitle</code> variable refers to the same thing as <code>window.movieTitle</code> and <code>this.movieTitle</code>.\n</p>\n<pre>\nvar movieTitle = \"Star Wars\";\nconsole.log(movieTitle === this.movieTitle); // true\nconsole.log(movieTitle === window.movieTitle); // true\n</pre>\n", "LastUpdated": "634298578273756641", "IsDeleted": false, "OwnerId": null }, { "__metadata": { "uri": "http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries(2)", "type": "ReferenceDBModel.Entry" }, "Id": 2, "Name": "eval(string)", "Browsers": "ff3_6,ie8,ie9,c8,sf5,es3,es5", "Syntax": "function", "ShortDescription": "Evaluates and executes JavaScript code dynamically", "FullDescription": "<p>\nThe following code evaluates and executes the string \"3+5\" at runtime.\n</p>\n<pre>\nvar result = eval(\"3+5\");\nconsole.log(result); // returns 8\n</pre>\n<p>\nYou can rewrite the code above like this:\n</p>\n<pre>\nvar result;\neval(\"result = 3+5\");\nconsole.log(result);\n</pre>", "LastUpdated": "634298580913817644", "IsDeleted": false, "OwnerId": 1 } … ]} I worried about the amount of time that it would take to transfer the records. According to Google Chome, it takes about 5 seconds to retrieve all 300+ records on a broadband connection over the Internet. 5 seconds is a small price to pay to avoid performing any server fetches of the data in the future. And here are the estimated times using different types of connections using Fiddler: Notice that using a modem, it takes 33 seconds to download the database. 33 seconds is a significant chunk of time. So, I would not use the approach of transferring the entire database up front if you expect a significant portion of your website audience to connect to your website with a modem. Adding Data to HTML5 Local Storage After the JavaScript entries are retrieved from the server, the entries are stored in HTML5 local storage. Here’s the reference documentation for HTML5 storage for Internet Explorer: http://msdn.microsoft.com/en-us/library/cc197062(VS.85).aspx You access local storage by accessing the windows.localStorage object in JavaScript. This object contains key/value pairs. For example, you can use the following JavaScript code to add a new item to local storage: <script type="text/javascript"> window.localStorage.setItem("message", "Hello World!"); </script>   You can use the Google Chrome Storage tab in the Developer Tools (hit CTRL-SHIFT I in Chrome) to view items added to local storage: After you add an item to local storage, you can read it at any time in the future by using the window.localStorage.getItem() method: <script type="text/javascript"> window.localStorage.setItem("message", "Hello World!"); </script>   You only can add strings to local storage and not JavaScript objects such as arrays. Therefore, before adding a JavaScript object to local storage, you need to convert it into a JSON string. In the JavaScript Reference application, I use a wrapper around local storage that looks something like this: function Storage() { this.get = function (name) { return JSON.parse(window.localStorage.getItem(name)); }; this.set = function (name, value) { window.localStorage.setItem(name, JSON.stringify(value)); }; this.clear = function () { window.localStorage.clear(); }; }   If you use the wrapper above, then you can add arbitrary JavaScript objects to local storage like this: var store = new Storage(); // Add array to storage var products = [ {name:"Fish", price:2.33}, {name:"Bacon", price:1.33} ]; store.set("products", products); // Retrieve items from storage var products = store.get("products");   Modern browsers support the JSON object natively. If you need the script above to work with older browsers then you should download the JSON2.js library from: https://github.com/douglascrockford/JSON-js The JSON2 library will use the native JSON object if a browser already supports JSON. Merging Server Changes with Browser Local Storage When you first open the JavaScript Reference application, the entire database of JavaScript entries is transferred from the server to the browser. Two items are added to local storage: entries and entriesLastUpdated. The first item contains the entire entries database (a big JSON string of entries). The second item, a timestamp, represents the version of the entries. Whenever you open the JavaScript Reference in the future, the entriesLastUpdated timestamp is passed to the server. Only records that have been deleted, updated, or added since entriesLastUpdated are transferred to the browser. The OData query to get the latest updates looks like this: http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries?$filter=(LastUpdated%20gt%20634301199890494792L) If you remove URL encoding, the query looks like this: http://superexpert.com/javascriptreference/Services/EntryService.svc/Entries?$filter=(LastUpdated gt 634301199890494792L) This query returns only those entries where the value of LastUpdated > 634301199890494792 (the version timestamp). The changes – new JavaScript entries, deleted entries, and updated entries – are merged with the existing entries in local storage. The JavaScript code for performing the merge is contained in the EntriesHelper.js file. The merge() method looks like this:   merge: function (oldEntries, newEntries) { // concat (this performs the add) oldEntries = oldEntries || []; var mergedEntries = oldEntries.concat(newEntries); // sort this.sortByIdThenLastUpdated(mergedEntries); // prune duplicates (this performs the update) mergedEntries = this.pruneDuplicates(mergedEntries); // delete mergedEntries = this.removeIsDeleted(mergedEntries); // Sort this.sortByName(mergedEntries); return mergedEntries; },   The contents of local storage are then updated with the merged entries. I spent several hours writing the merge() method (much longer than I expected). I found two resources to be extremely useful. First, I wrote extensive unit tests for the merge() method. I wrote the unit tests using server-side JavaScript. I describe this approach to writing unit tests in this blog entry. The unit tests are included in the JavaScript Reference source code. Second, I found the following blog entry to be super useful (thanks Nick!): http://nicksnettravels.builttoroam.com/post/2010/08/03/OData-Synchronization-with-WCF-Data-Services.aspx One big challenge that I encountered involved timestamps. I originally tried to store an actual UTC time as the value of the entriesLastUpdated item. I quickly discovered that trying to work with dates in JSON turned out to be a big can of worms that I did not want to open. Next, I tried to use a SQL timestamp column. However, I learned that OData cannot handle the timestamp data type when doing a filter query. Therefore, I ended up using a bigint column in SQL and manually creating the value when a record is updated. I overrode the SaveChanges() method to look something like this: public override int SaveChanges(SaveOptions options) { var changes = this.ObjectStateManager.GetObjectStateEntries( EntityState.Modified | EntityState.Added | EntityState.Deleted); foreach (var change in changes) { var entity = change.Entity as IEntityTracking; if (entity != null) { entity.LastUpdated = DateTime.Now.Ticks; } } return base.SaveChanges(options); }   Notice that I assign Date.Now.Ticks to the entity.LastUpdated property whenever an entry is modified, added, or deleted. Summary After building the JavaScript Reference application, I am convinced that HTML5 local storage can have a dramatic impact on the performance of any data-driven web application. If you are building a web application that involves extensive interaction with data then I recommend that you take advantage of this new feature included in the HTML5 standard.

  Read the article

• CodePlex Daily Summary for Thursday, June 30, 2011

  CodePlex Daily Summary for Thursday, June 30, 2011Popular ReleasesASP.NET Comet Ajax Library (Reverse Ajax - Server Push): Reverse Ajax Samples v1.53: 16 Comprehensive ASP.NET Ajax / Reverse Ajax / WCF / MVC / Mono samplesReactive Extensions - Extensions (Rxx): Rxx 1.1: What's NewRelated Work Items Please read the latest release notes for details about what's new. About LabsAll "Labs" downloads include the Rxx.dll assembly, so only a single download is required. To start RxxLabs.exe, right-mouse click and select Run as Administrator; otherwise, do not run the Reactive WebClient lab because it will crash the program. RxxLabs.exe requires administrator privileges for the Reactive WebClient lab to register a local HTTP port. To launch the Silverlight labs...CommonLibrary.NET: CommonLibrary.NET - 0.9.7 Final: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.7Documentation 6738 6503 New 6535 Enhancements 6759 6748 6583 6737datajs - JavaScript Library for data-centric web applications: datajs version 1.0.0: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.4: Fix for http://coding4fun.codeplex.com/workitem/6869 was incomplete. Back button wouldn't return app bar. Corrected now. High impact bugSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.528.279): Added keyboard shortcuts: - Cut (CTRL+X) - Copy (CTRL+C) - Paste (CTRL+V) - Delete (CTRL+D) - Move up (CTRL+UP ARROW) - Move down (CTRL+DOWN ARROW) Added ability to save/load SiteMap from/to a Xml file on disk Bug fix: - Connect to a server through the status bar was throwing error "Object Reference not set to an instance of an object" - Rename TreeNode.Name after changing TreeNode.TextMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample: V2.01 ALPHA N-Layered SampleApp .NET 4.0 and EF4.1: V2.0.01 - ALPHARequired Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power ...Mosaic Project: Mosaic Alpha build 261: - Fixed crash when pinning applications in x64 OS - Added Hub to video widget. It shows videos from Video library (only .wmv and .avi). Can work slow if there are too much files. - Fixed some issues with scrolling - Fixed bug with html widgets - Fixed bug in Gmail widget - Added html today widget missed in previous release - Now Mosaic saves running widgets if you restarting from optionsEnhSim: EnhSim 2.4.9 BETA: 2.4.9 BETAThis release supports WoW patch 4.2 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in some of th....NET Reflector Add-Ins: Reflector V7 Add-Ins: All the add-ins compiled for Reflector V7TerrariViewer: TerrariViewer v4.1 [4.0 Bug Fixes]: Version 4.1 ChangelogChanged how users will Open Player files (This change makes it much easier) This allowed me to remove the "Current player file" labels that were present Changed file control icons Added submit bug button Various Bug Fixes Fixed crashes related to clicking on buffs before a character is loaded Fixed crashes related to selecting "No Buff" when choosing a new buff Fixed crashes related to clicking on a "Max" button on the buff tab before a character is loaded Cor...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta8: ??AcDown???????????????，?????????????????????。????????????????????，??Acfun、Bilibili、???、???、?????，???????????、???????。 AcDown???????????????????????????，???，???????????????????。 AcDown???????C#??，?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ??v3.0 Beta8 ?? ??????????????? ???????????????(??????????) ???????...BlogEngine.NET: BlogEngine.NET 2.5: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.5 instructions. To get started, be sure to check out our installatio...PHP Manager for IIS: PHP Manager 1.2 for IIS 7: This release contains all the functionality available in 62183 plus the following additions: Command Line Support via PowerShell - now it is possible to manage and script PHP installations on IIS by using Windows PowerShell. More information is available at Managing PHP installations with PHP Manager command line. Detection and alert when using local PHP handler - if a web site or a directory has a local copy of PHP handler mapping then the configuration changes made on upper configuration ...MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5New Projects{Adjunct} functionality for the .NET framework: A project to provide Ingots for the .NET framework.3Webee.net: 3Webee.net is the First Navigator dedicated to Web.3.0 by P2P. Developped in C# for DotNet-3.5 or Mono.net, compatible with Linux ready. Website.fr : http://3webee.net/ Download Win32 : http://3webee.net/Download/3Webee.net.beta.0.0.Win32.exe AB Donor Choose Planner: The goal of this doantion planner is to allow you to coordinate the completion of one or more Donors Choose projects. The tool gives you a portfolio view of the donations you would like to invest in by targeting your investments in a location/regional focused manner.appperu1: asdasdsaddas: ColinTestingasdfFindClone: Find clone files, find duplicate files, remove duplicate filesfirstcpapp: This is my appForecast Parser: The NOAA hosts forecast data accessible over the web. These libraries download and parse seven day hourly forecast data and encapsulates the data in an easy to use class.Future Apple Osx: Future Apple Osx, Is a free operating system to use. It was built from the ground up with the help of Cosmos. It is free to use and download. So please check it out today.Glimpse: Glimpse is a web debugger and diagnostics tool for ASP.NET and ASP.NET MVC. You can find out more at getGlimpse.comiAdm: ?? iToday ??? wince 6 R2 ?????ImagineCup Worldwide Finals Tracker: An open-source Windows Phone application that is used to track the events going on at the ImagineCup Worldwide Finals.John Owl: John OwlLAM - Local Area Messaging: A VB.NET local area chat application. Finds the lan clients and communicates through the lan with old Ms-Winsock Interop.MessyBrain: Organize your tasks in an efficient way. Assign tasks to members of your team. Create workflows for your team. Written in C# and ASP.NET MVC. Why did I start this project? Making mistakes is part of the learning process. They can be painful especially when they are made at work; there’s a cost attached to it. Why not start a project on my own? Mistakes will be less painful (only my ego will be damaged), I learn something new and there isn’t a cost attached to it. I can share the code ...Navigation Light Toolkit: Navigation Light add support for View Navigation in WPF and SilverlightRight Click Calculator: a mini calculator with numpad that opens in a dialogbox. it can combined with a textbox. bir textbox üzerinde sag tus ile açabileceginiz ufak bir hesap makinesi örnegi.Shaaps & Ladders: It's a modern software implementation of the popular classic board game Snakes & Ladders. The Bengali translation of "Snakes" pronounces "Shaaps" and thus the name of the game is such. The game is being developed on top of the Shaaps & Ladders GDK. Source for both are released.SharePoint PowerShell Scripts: Usefull PowerShell scripts written for SharePoint that helps organizations with governance.Smith Web Tools: Smith Web Tools are some useful controls to help to build web application. They are written in pure JavaScript and CSS without introducing any other JavaScript framework. At present, the Smith Calendar, Smith Editor, and Smith Dialog are available.SSAS Query Log Decoder & Analyzer: The Crisp description for the project will be "CUBE FOR CUBE". This is an end-to-end BI solution for analyzing the Query log created by SSAS Server. The Query Log data is loaded into a dimensional model and a cube is built on top of it for analysis of cube usage.takcandmansys: takcandmansysTestHG1: TestHG1TESTProjHG: TESTProjHGTestTFS1: TestTFS1TESTTFSAAA: TESTTFSAAATower: tower showTransit Feed Generator: Library for help the integration with Google Transit. This library generates the zipped file with data for Google Transit Feed, in the GTFS formatVRE Collaborator Search Kit for SharePoint 2010: VRE Collaborator Search Kit for SharePoint 2010VRE Content Archiving Kit for SharePoint 2010: VRE Content Archiving Kit for SharePoint 2010VRE Document Review Workflow Kit for SharePoint 2010: VRE Document Review Workflow Kit for SharePoint 2010 VRE Literature Review Kit for SharePoint 2010: VRE Literature Review Kit for SharePoint 2010 VRE Researcher and Project Templates for SharePoint 2010: VRE Researcher and Project Templates for SharePoint 2010 VRE RSS Feeds Kit for SharePoint 2010: VRE RSS Feeds Kit for SharePoint 2010 VRE User Administration (FBA) Kit for SharePoint 2010: VRE User Administration (FBA) Kit for SharePoint 2010 WebPart Collapser: WebPart Collapser is a lightweight, customizable jQuery plugin for SharePoint 2007 that allows visitors to expand/collapse WebParts. Through the use of cookies, the collapsed state of any webparts will be saved and collapsed each time a user visits a page. WPF Hex Editor: hex editor which is created with WPF with a xaml designed UI.Xoorscript: A proprietary scripting language created by Jared Thomson for the purpose of script defining an easy to use make system. The plans for this project are minimal for now, but if things go well I may expand it. This is low priority for me.

  Read the article

• Auto blocking attacking IP address

  - by dong

  This is to share my PowerShell code online. I original asked this question on MSDN forum (or TechNet?) here: http://social.technet.microsoft.com/Forums/en-US/winserversecurity/thread/f950686e-e3f8-4cf2-b8ec-2685c1ed7a77 In short, this is trying to find attacking IP address then add it into Firewall block rule. So I suppose: 1, You are running a Windows Server 2008 facing the Internet. 2, You need to have some port open for service, e.g. TCP 21 for FTP; TCP 3389 for Remote Desktop. You can see in my code I’m only dealing with these two since that’s what I opened. You can add further port number if you like, but the way to process might be different with these two. 3, I strongly suggest you use STRONG password and follow all security best practices, this ps1 code is NOT for adding security to your server, but reduce the nuisance from brute force attack, and make sys admin’s life easier: i.e. your FTP log won’t hold megabytes of nonsense, your Windows system log will not roll back and only can tell you what happened last month. 4, You are comfortable with setting up Windows Firewall rules, in my code, my rule has a name of “MY BLACKLIST”, you need to setup a similar one, and set it to BLOCK everything. 5, My rule is dangerous because it has the risk to block myself out as well. I do have a backup plan i.e. the DELL DRAC5 so that if that happens, I still can remote console to my server and reset the firewall. 6, By no means the code is perfect, the coding style, the use of PowerShell skills, the hard coded part, all can be improved, it’s just that it’s good enough for me already. It has been running on my server for more than 7 MONTHS. 7, Current code still has problem, I didn’t solve it yet, further on this point after the code. :)    #Dong Xie, March 2012  #my simple code to monitor attack and deal with it  #Windows Server 2008 Logon Type  #8: NetworkCleartext, i.e. FTP  #10: RemoteInteractive, i.e. RDP    $tick = 0;  "Start to run at: " + (get-date);    $regex1 = [regex] "192\.168\.100\.(?:101|102):3389\s+(\d+\.\d+\.\d+\.\d+)";  $regex2 = [regex] "Source Network Address:\t(\d+\.\d+\.\d+\.\d+)";    while($True) {   $blacklist = @();     "Running... (tick:" + $tick + ")"; $tick+=1;    #Port 3389  $a = @()  netstat -no | Select-String ":3389" | ? { $m = $regex1.Match($_); `    $ip = $m.Groups[1].Value; if ($m.Success -and $ip -ne "10.0.0.1") {$a = $a + $ip;} }  if ($a.count -gt 0) {    $ips = get-eventlog Security -Newest 1000 | Where-Object {$_.EventID -eq 4625 -and $_.Message -match "Logon Type:\s+10"} | foreach { `      $m = $regex2.Match($_.Message); $ip = $m.Groups[1].Value; $ip; } | Sort-Object | Tee-Object -Variable list | Get-Unique    foreach ($ip in $a) { if ($ips -contains $ip) {      if (-not ($blacklist -contains $ip)) {        $attack_count = ($list | Select-String $ip -SimpleMatch | Measure-Object).count;        "Found attacking IP on 3389: " + $ip + ", with count: " + $attack_count;        if ($attack_count -ge 20) {$blacklist = $blacklist + $ip;}      }      }    }  }      #FTP  $now = (Get-Date).AddMinutes(-5); #check only last 5 mins.     #Get-EventLog has built-in switch for EventID, Message, Time, etc. but using any of these it will be VERY slow.  $count = (Get-EventLog Security -Newest 1000 | Where-Object {$_.EventID -eq 4625 -and $_.Message -match "Logon Type:\s+8" -and `              $_.TimeGenerated.CompareTo($now) -gt 0} | Measure-Object).count;  if ($count -gt 50) #threshold  {     $ips = @();     $ips1 = dir "C:\inetpub\logs\LogFiles\FPTSVC2" | Sort-Object -Property LastWriteTime -Descending `       | select -First 1 | gc | select -Last 200 | where {$_ -match "An\+error\+occured\+during\+the\+authentication\+process."} `        | Select-String -Pattern "(\d+\.\d+\.\d+\.\d+)" | select -ExpandProperty Matches | select -ExpandProperty value | Group-Object `        | where {$_.Count -ge 10} | select -ExpandProperty Name;       $ips2 = dir "C:\inetpub\logs\LogFiles\FTPSVC3" | Sort-Object -Property LastWriteTime -Descending `       | select -First 1 | gc | select -Last 200 | where {$_ -match "An\+error\+occured\+during\+the\+authentication\+process."} `        | Select-String -Pattern "(\d+\.\d+\.\d+\.\d+)" | select -ExpandProperty Matches | select -ExpandProperty value | Group-Object `        | where {$_.Count -ge 10} | select -ExpandProperty Name;     $ips += $ips1; $ips += $ips2; $ips = $ips | where {$_ -ne "10.0.0.1"} | Sort-Object | Get-Unique;         foreach ($ip in $ips) {       if (-not ($blacklist -contains $ip)) {        "Found attacking IP on FTP: " + $ip;        $blacklist = $blacklist + $ip;       }     }  }        #Firewall change <# $current = (netsh advfirewall firewall show rule name="MY BLACKLIST" | where {$_ -match "RemoteIP"}).replace("RemoteIP:", "").replace(" ","").replace("/255.255.255.255",""); #inside $current there is no \r or \n need remove. foreach ($ip in $blacklist) { if (-not ($current -match $ip) -and -not ($ip -like "10.0.0.*")) {"Adding this IP into firewall blocklist: " + $ip; $c= 'netsh advfirewall firewall set rule name="MY BLACKLIST" new RemoteIP="{0},{1}"' -f $ip, $current; Invoke-Expression $c; } } #>    foreach ($ip in $blacklist) {    $fw=New-object –comObject HNetCfg.FwPolicy2; # http://blogs.technet.com/b/jamesone/archive/2009/02/18/how-to-manage-the-windows-firewall-settings-with-powershell.aspx    $myrule = $fw.Rules | where {$_.Name -eq "MY BLACKLIST"} | select -First 1; # Potential bug here?    if (-not ($myrule.RemoteAddresses -match $ip) -and -not ($ip -like "10.0.0.*"))      {"Adding this IP into firewall blocklist: " + $ip;         $myrule.RemoteAddresses+=(","+$ip);      }  }    Wait-Event -Timeout 30 #pause 30 secs    } # end of top while loop.   Further points: 1, I suppose the server is listening on port 3389 on server IP: 192.168.100.101 and 192.168.100.102, you need to replace that with your real IP. 2, I suppose you are Remote Desktop to this server from a workstation with IP: 10.0.0.1. Please replace as well. 3, The threshold for 3389 attack is 20, you don’t want to block yourself just because you typed your password wrong 3 times, you can change this threshold by your own reasoning. 4, FTP is checking the log for attack only to the last 5 mins, you can change that as well. 5, I suppose the server is serving FTP on both IP address and their LOG path are C:\inetpub\logs\LogFiles\FPTSVC2 and C:\inetpub\logs\LogFiles\FPTSVC3. Change accordingly. 6, FTP checking code is only asking for the last 200 lines of log, and the threshold is 10, change as you wish. 7, the code runs in a loop, you can set the loop time at the last line. To run this code, copy and paste to your editor, finish all the editing, get it to your server, and open an CMD window, then type powershell.exe –file your_powershell_file_name.ps1, it will start running, you can Ctrl-C to break it. This is what you see when it’s running: This is when it detected attack and adding the firewall rule: Regarding the design of the code: 1, There are many ways you can detect the attack, but to add an IP into a block rule is no small thing, you need to think hard before doing it, reason for that may include: You don’t want block yourself; and not blocking your customer/user, i.e. the good guy. 2, Thus for each service/port, I double check. For 3389, first it needs to show in netstat.exe, then the Event log; for FTP, first check the Event log, then the FTP log files. 3, At three places I need to make sure I’m not adding myself into the block rule. –ne with single IP, –like with subnet.   Now the final bit: 1, The code will stop working after a while (depends on how busy you are attacked, could be weeks, months, or days?!) It will throw Red error message in CMD, don’t Panic, it does no harm, but it also no longer blocking new attack. THE REASON is not confirmed with MS people: the COM object to manage firewall, you can only give it a list of IP addresses to the length of around 32KB I think, once it reaches the limit, you get the error message. 2, This is in fact my second solution to use the COM object, the first solution is still in the comment block for your reference, which is using netsh, that fails because being run from CMD, you can only throw it a list of IP to 8KB. 3, I haven’t worked the workaround yet, some ideas include: wrap that RemoteAddresses setting line with error checking and once it reaches the limit, use the newly detected IP to be the list, not appending to it. This basically reset your block rule to ground zero and lose the previous bad IPs. This does no harm as it sounds, because given a certain period has passed, any these bad IPs still not repent and continue the attack to you, it only got 30 seconds or 20 guesses of your password before you block it again. And there is the benefit that the bad IP may turn back to the good hands again, and you are not blocking a potential customer or your CEO’s home pc because once upon a time, it’s a zombie. Thus the ZEN of blocking: never block any IP for too long. 4, But if you insist to block the ugly forever, my other ideas include: You call MS support, ask them how can we set an arbitrary length of IP addresses in a rule; at least from my experiences at the Forum, they don’t know and they don’t care, because they think the dynamic blocking should be done by some expensive hardware. Or, from programming perspective, you can create a new rule once the old is full, then you’ll have MY BLACKLIST1, MY  BLACKLIST2, MY BLACKLIST3, … etc. Once in a while you can compile them together and start a business to sell your blacklist on the market! Enjoy the code! p.s. (PowerShell is REALLY REALLY GREAT!)

  Read the article

• You should NOT be writing jQuery in SharePoint if&hellip;

  - by Mark Rackley

  Yes… another one of these posts. What can I say? I’m a pot stirrer.. a rabble rouser *rabble rabble* jQuery in SharePoint seems to be a fairly polarizing issue with one side thinking it is the most awesome thing since Princess Leia as the slave girl in Return of the Jedi and the other half thinking it is the worst idea since Mannequin 2: On the Move. The correct answer is OF COURSE “it depends”. But what are those deciding factors that make jQuery an awesome fit or leave a bad taste in your mouth? Let’s see if I can drive the discussion here with some polarizing comments of my own… I know some of you are getting ready to leave your comments even now before reading the rest of the blog, which is great! Iron sharpens iron… These discussions hopefully open us up to understanding the entire process better and think about things in a different way. You should not be writing jQuery in SharePoint if you are not a developer… Let’s start off with my most polarizing and rant filled portion of the blog post. If you don’t know what you are doing or you don’t have a background that helps you understand the implications of what you are writing then you should not be writing jQuery in SharePoint! I truly believe that one of the biggest reasons for the jQuery haters is because of all the bad jQuery out there. If you don’t know what you are doing you can do some NASTY things! One of the best stories I’ve heard about this is from my good friend John Ferringer (@ferringer). John tells this story during our Mythbusters session we do together. One of his clients was undergoing a Denial of Service attack and they couldn’t figure out what was going on! After much searching they found that some genius jQuery developer wrote some code for an image rotator, but did not take into account what happens when there are no images to load! The code just kept hitting the servers over and over and over again which prevented anything else from getting done! Now, I’m NOT saying that I have not done the same sort of thing in the past or am immune from such mistakes. My point is that if you don’t know what you are doing, there are very REAL consequences that can have a major impact on your organization AND they will be hard to track down.  Think how happy your boss will be after you copy and pasted some jQuery from a blog without understanding what it does, it brings down the farm, AND it takes them 3 days to track it back to you.  :/ Good times will not be had. Like it or not JavaScript/jQuery is a programming language. While you .NET people sit on your high horses because your code is compiled and “runs faster” (also debatable), the rest of us will be actually getting work done and delivering solutions while you are trying to figure out why your widget won’t deploy. I can pick at that scab because I write .NET code too and speak from experience. I can do both, and do both well. So, I am not speaking from ignorance here. In JavaScript/jQuery you have variables, loops, conditionals, functions, arrays, events, and built in methods. If you are not a developer you just aren’t going to take advantage of all of that and use it correctly. Ahhh.. but there is hope! There is a lot of jQuery resources out there to help you learn and learn well! There are many experts on the subject that will gladly tell you when you are smoking crack. I just this minute saw a tweet from @cquick with a link to: “jQuery Fundamentals”. I just glanced through it and this may be a great primer for you aspiring jQuery devs. Take advantage of all the resources and become a developer! Hey, it will look awesome on your resume right? You should not be writing jQuery in SharePoint if it depends too much on client resources for a good user experience I’ve said it once and I’ll say it over and over until you understand. jQuery is executed on the client’s computer. Got it? If you are looping through hundreds of rows of data, searching through an enormous DOM, or performing many calculations it is going to take some time! AND if your user happens to be sitting on some old PC somewhere that they picked up at a garage sale their experience will be that much worse! If you can’t give the user a good experience they will not use the site. So, if jQuery is causing the user to have a bad experience, don’t use it. I sometimes go as far to say that you should NOT go to jQuery as a first option for external facing web sites because you have ZERO control over what the end user’s computer will be. You just can’t guarantee an awesome user experience all of the time. Ahhh… but you have no choice? (where have I heard that before?). Well… if you really have no choice, here are some tips to help improve the experience: Avoid screen scraping This is not 1999 and SharePoint is not an old green screen from a mainframe… so why are you treating it like it is? Screen scraping is time consuming and client intensive. Take advantage of tools like SPServices to do your data retrieval when possible. Fine tune your DOM searches A lot of time can be eaten up just searching the DOM and ignoring table rows that you don’t need. Write better jQuery to only loop through tables rows that you need, or only access specific elements you need. Take advantage of Element ID’s to return the one element you are looking for instead of looping through all the DOM over and over again. Write better jQuery Remember this is development. Think about how you can write cleaner, faster jQuery. This directly relates to the previous point of improving your DOM searches, but also when using arrays, variables and loops. Do you REALLY need to loop through that array 3 times? How can you knock it down to 2 times or even 1? When you have lots of calculations and data that you are manipulating every operation adds up. Think about how you can streamline it. Back in the old days before RAM was abundant, Cores were plentiful and dinosaurs roamed the earth, us developers had to take performance into account in everything we did. It’s a lost art that really needs to be used here. You should not be writing jQuery in SharePoint if you are sending a lot of data over the wire… Developer:  “Awesome… you can easily call SharePoint’s web services to retrieve and write data using SPServices!” Administrator: “Crap! you can easily call SharePoint’s web services to retrieve and write data using SPServices!” SPServices may indeed be the best thing that happened to SharePoint since the invention of SharePoint Saturdays by Godfather Lotter… BUT you HAVE to use it wisely! (I REFUSE to make the Spiderman reference). If you do not know what you are doing your code will bring back EVERY field and EVERY row from a list and push that over the internet with all that lovely XML wrapped around it. That can be a HUGE amount of data and will GREATLY impact performance! Calling several web service methods at the same time can cause the same problem and can negatively impact your SharePoint servers. These problems, thankfully, are not difficult to rectify if you are careful: Limit list data retrieved Use CAML to reduce the number of rows returned and limit the fields returned using ViewFields.  You should definitely be doing this regardless. If you aren’t I hope your admin thumps you upside the head. Batch large list updates You may or may not have noticed that if you try to do large updates (hundreds of rows) that the performance is either completely abysmal or it fails over half the time. You can greatly improve performance and avoid timeouts by breaking up your updates into several smaller updates. I don’t know if there is a magic number for best performance, it really depends on how much data you are sending back more than the number of rows. However, I have found that 200 rows generally works well.  Play around and find the right number for your situation. Delay Web Service calls when possible One of the cool things about jQuery and SPServices is that you can delay queries to the server until they are actually needed instead of doing them all at once. This can lead to performance improvements over DataViewWebParts and even .NET code in the right situations. So, don’t load the data until it’s needed. In some instances you may not need to retrieve the data at all, so why retrieve it ALL the time? You should not be writing jQuery in SharePoint if there is a better solution… jQuery is NOT the silver bullet in SharePoint, it is not the answer to every question, it is just another tool in the developers toolkit. I urge all developers to know what options exist out there and choose the right one! Sometimes it will be jQuery, sometimes it will be .NET,  sometimes it will be XSL, and sometimes it will be some other choice… So, when is there a better solution to jQuery? When you can’t get away from performance problems Sometimes jQuery will just give you horrible performance regardless of what you do because of unavoidable obstacles. In these situations you are going to have to figure out an alternative. Can I do it with a DVWP or do I have to crack open Visual Studio? When you need to do something that jQuery can’t do There are lots of things you can’t do in jQuery like elevate privileges, event handlers, workflows, or interact with back end systems that have no web service interface. It just can’t do everything. When it can be done faster and more efficiently another way Why are you spending time to write jQuery to do a DataViewWebPart that would take 5 minutes? Or why are you trying to implement complicated logic that would be simple to do in .NET? If your answer is that you don’t have the option, okay. BUT if you do have the option don’t reinvent the wheel! Take advantage of the other tools. The answer is not always jQuery… sorry… the kool-aid tastes good, but sweet tea is pretty awesome too. You should not be using jQuery in SharePoint if you are a moron… Let’s finish up the blog on a high note… Yes.. it’s true, I sometimes type things just to get a reaction… guess this section title might be a good example, but it feels good sometimes just to type the words that a lot of us think… So.. don’t be that guy! Another good buddy of mine that works for Microsoft told me. “I loved jQuery in SharePoint…. until I had to support it.”. He went on to explain that some user was making several web service calls on a page using jQuery and then was calling Microsoft and COMPLAINING because the page took so long to load… DUH! What do you expect to happen when you are pushing that much data over the wire and are making that many web service calls at once!! It’s one thing to write that kind of code and accept it’s just going to take a while, it’s COMPLETELY another issue to do that and then complain when it’s not lightning fast!  Someone’s gene pool needs some chlorine. So, I think this is a nice summary of the blog… DON’T be that guy… don’t be a moron. How can you stop yourself from being a moron? Ah.. glad you asked, here are some tips: Think Is jQuery the right solution to my problem? Is there a better approach? What are the implications and pitfalls of using jQuery in this situation? Search What are others doing? Does someone have a better solution? Is there a third party library that does the same thing I need? Plan Write good jQuery. Limit calculations and data sent over the wire and don’t reinvent the wheel when possible. Test Okay, it works well on your machine. Try it on others ESPECIALLY if this is for an external site. Test with empty data. Test with hundreds of rows of data. Test as many scenarios as possible. Monitor those server resources to see the impact there as well. Ask the experts As smart as you are, there are people smarter than you. Even the experts talk to each other to make sure they aren't doing something stupid. And for the MOST part they are pretty nice guys. Marc Anderson and Christophe Humbert are two guys who regularly keep me in line. Make sure you aren’t doing something stupid. Repeat So, when you think you have the best solution possible, repeat the steps above just to be safe.  Conclusion jQuery is an awesome tool and has come in handy on many occasions. I’m even teaching a 1/2 day SharePoint & jQuery workshop at the upcoming SPTechCon in Boston if you want to berate me in person. However, it’s only as awesome as the developer behind the keyboard. It IS development and has its pitfalls. Knowledge and experience are invaluable to giving the user the best experience possible.  Let’s face it, in the end, no matter our opinions, prejudices, or ego providing our clients, customers, and users with the best solution possible is what counts. Period… end of sentence…

  Read the article

• CodePlex Daily Summary for Thursday, October 24, 2013

  CodePlex Daily Summary for Thursday, October 24, 2013Popular ReleasesX-tee.NET: X-tee.NET 1.0.4: Few code generation bug fixes.VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 32 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) This release has been tested with Visual Studio 2008, 2010, 2012 and 2013, using TortoiseSVN 1.6, 1.7 and 1.8. It should also still work with Visual Studio 2005, but I couldn't find anyone to test it in VS2005. Build 32 (beta) changelogNew: Added Visual Studio 2013 support New: Added Visual Studio 2012 support New: Added SVN 1.8 support New: Added 'Ch...ABCat: ABCat v.2.0.1a: ?????????? ???????? ? ?????????? ?????? ???? ??? Win7. ????????? ?????? ????????? ?? ???????. ????? ?????, ???? ????? ???????? ????????? ?????????? ????????? "?? ??????? ????? ???????????? ?????????? ??????...", ?? ?????????? ??????? ? ?????????? ?????? Microsoft SQL Ce ?? ????????? ??????: http://www.microsoft.com/en-us/download/details.aspx?id=17876. ???????? ?????? x64 ??? x86 ? ??????????? ?? ?????? ???????????? ???????. ??? ??????? ????????? ?? ?????????? ?????? Entity Framework, ? ???? ...NB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.8 Rel3: vv2.3.8 Rel3 updates the version number in the ManagerMenuDefault.xml. Simply update the version setting in the Back Office to 02.03.08 if you have already installed Rel2. v2.3.8 Is now DNN6 and DNN7 compatible NOTE: NB_Store v2.3.8 is NOT compatible with DNN5. SOURCE CODE : https://github.com/leedavi/NB_Store (Source code has been moved to GitHub, due to issues with codeplex SVN and the inability to move easily to GIT on codeplex)patterns & practices: Data Access Guidance: Data Access Guidance 2013: This is the 2013 release of Data Access Guidance. The documentation for this RI is also available on MSDN: Data Access for Highly-Scalable Solutions: Using SQL, NoSQL, and Polyglot Persistence: http://msdn.microsoft.com/en-us/library/dn271399.aspxMedia Companion: Media Companion MC3.584b: IMDB changes fixed. Fixed* mc_com.exe - Fixed to using new profile entries. * Movie - fixed rename movie and folder if use foldername selected. * Movie - Alt Edit Movie, trailer url check if changed and confirm valid. * Movie - Fixed IMDB poster scraping * Movie - Fixed outline and Plot scraping, including removal of Hyperlink's. * Movie Poster refactoring, attempts to catch gdi+ errors Revision HistoryTerrariViewer: TerrariViewer v7.2 [Terraria Inventory Editor]: Added "Check for Update" button Hopefully fixed Windows XP issue You can now backspace in Item stack fieldsDirectXTex texture processing library: October 2013: October 21, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM PremultiplyAlpha updated with new 'flags' parameter and to use sRGB correct blending Fixed colorspace conversion issue with DirectCompute compressor when compressing for BC7 SRGBSimple Injector: Simple Injector v2.3.6: This patch releases fixes one bug concerning resolving open generic types that contain nested generic type arguments. Nested generic types were handled incorrectly in certain cases. This affects RegisterOpenGeneric and RegisterDecorator. (work item 20332)Virtual Wifi Hotspot for Windows 7 & 8: Virtual Router Plus 2.6.0: Virtual Router Plus 2.6.0Fast YouTube Downloader: Fast YouTube Downloader 2.3.0: Fast YouTube DownloaderMagick.NET: Magick.NET 6.8.7.101: Magick.NET linked with ImageMagick 6.8.7.1. Breaking changes: - Renamed Matrix classes: MatrixColor = ColorMatrix and MatrixConvolve = ConvolveMatrix. - Renamed Depth method with Channels parameter to BitDepth and changed the other method into a property.VidCoder: 1.5.9 Beta: Added Rip DVD and Rip Blu-ray AutoPlay actions for Windows: now you can have VidCoder start up and scan a disc when you insert it. Go to Start -> AutoPlay to set it up. Added error message for Windows XP users rather than letting it crash. Removed "quality" preset from list for QSV as it currently doesn't offer much improvement. Changed installer to ignore version number when copying files over. Should reduce the chances of a bug from me forgetting to increment a version number. Fixed ...MSBuild Extension Pack: October 2013: Release Blog Post The MSBuild Extension Pack October 2013 release provides a collection of over 480 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...VG-Ripper & PG-Ripper: VG-Ripper 2.9.49: changes NEW: Added Support for "ImageTeam.org links NEW: Added Support for "ImgNext.com" links NEW: Added Support for "HostUrImage.com" links NEW: Added Support for "3XVintage.com" linksmyCollections: Version 2.8.7.0: New in this version : Added Public Rating Added Collection Number Added Order by Collection Number Improved XBMC integrations Play on music item will now launch default player. Settings are now saved in database. Tooltip now display sort information. Fix Issue with Stars on card view. Fix Bug with PDF Export. Fix Bug with technical information's. Fix HotMovies Provider. Improved Performance on Save. Bug FixingMoreTerra (Terraria World Viewer): MoreTerra 1.11.3.1: Release 1.11.3.1 ================ = New Features = ================ Added markers for Copper Cache, Silver Cache and the Enchanted Sword. ============= = Bug Fixes = ============= Use Official Colors now no longer tries to change the Draw Wires option instead. World reading was breaking for people with a stock 1.2 Terraria version. Changed world name reading so it does not crash the program if you load MoreTerra while Terraria is saving the world. =================== = Feature Removal = =...patterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3): Includes all changes in v1.3 beta 1 and v1.3 beta 2 Support for Windows 8.1 RTM and VS2013 RTM Xaml: New property: AutoLoadPluginTypes to help control which stock plugins are loaded by default (requires AutoLoadPlugins = true). Support for SystemMediaTransportControls on Windows 8.1 JS: Support for visual markers in the timeline. JS: Support for markers collection and markerreached event. JS: New ChaptersPlugin to automatically populate timeline with chapter tracks. JS: Audio an...Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falseNew ProjectsActive shape models for .net: Library to find Facial critical points (contour, nose, eyes, mouth) based on active shape models(wrapper for code.google.com/p/asmlibrary). Not support 64bit.Benson's Project: The Task1 project in ASP.NET calculates the sum of two numbers entered in two textboxes and give the output by label when the button "calculate sum" is clicked.cassan: asp.net mvc 4.5 build boostrap3 websiteCoreRG: This project is a Free GNU, its to fast development.Fractals Explorer: A Windows Phone 7 application for exploring a simple collection of fractals.GingerFight: Some test gameGirapong: Girapong is a game for Windows Phone that consist of an original approach to handle the classical sort of games like Pong, using the accelerometer of the phone.Headlight: -KeyWielder: Simple token generatorMDIContainer: MDIContainer extends WPF to support MDI. It displays your user control as window in a container.MocuGame Library: The MocuGame Library is a set of JavaScript classes made for handling every part of making an HTML5-based game, from audio, to graphics, to input.multi: Make creating multi machine environments simple. MvvmCrystalTool: Library for easy work with MVVM pattern in WP8PeerBlock For Android: PeerBlock For Android lets you control who your phone 'talks to' on the Internet. By selecting appropriate lists of 'known bad' computers, you can block...Pescar2013-Shop-Kristo-Giselle-Grecia: Tp para presentarlo el 10/10 PHP to Dynamics CRM 2011 Online: Connect you PHP webSite to Dynamics CRM 2011 Online throw WebServices. You can: - Create Entities - Update Entities - Delete Entities - Use Fetch QueriesProductive Production: Core functionality for a system to manage the entry of production in a manufacturing environment. The intent will be to provide some base functionality and intProject Of DreamTeam: Space Invaders windows phone / windowsTVShows-EF5: Proyecto básico de integración con diferentes tecnologías.Validation Engine: Validation Engine for WinForms. Engine provides powerful, flexible and easy to use rule based validation for your application. DevExpress and Net.Spring ready.WCF Events: Vis Stud 2010 C# WCF events Demo Solution??? ?, ??? ?.: ??? ?, ??? ?.

  Read the article

• C#/.NET Fundamentals: Choosing the Right Collection Class

  - by James Michael Hare

  The .NET Base Class Library (BCL) has a wide array of collection classes at your disposal which make it easy to manage collections of objects. While it's great to have so many classes available, it can be daunting to choose the right collection to use for any given situation. As hard as it may be, choosing the right collection can be absolutely key to the performance and maintainability of your application! This post will look at breaking down any confusion between each collection and the situations in which they excel. We will be spending most of our time looking at the System.Collections.Generic namespace, which is the recommended set of collections. The Generic Collections: System.Collections.Generic namespace The generic collections were introduced in .NET 2.0 in the System.Collections.Generic namespace. This is the main body of collections you should tend to focus on first, as they will tend to suit 99% of your needs right up front. It is important to note that the generic collections are unsynchronized. This decision was made for performance reasons because depending on how you are using the collections its completely possible that synchronization may not be required or may be needed on a higher level than simple method-level synchronization. Furthermore, concurrent read access (all writes done at beginning and never again) is always safe, but for concurrent mixed access you should either synchronize the collection or use one of the concurrent collections. So let's look at each of the collections in turn and its various pros and cons, at the end we'll summarize with a table to help make it easier to compare and contrast the different collections. The Associative Collection Classes Associative collections store a value in the collection by providing a key that is used to add/remove/lookup the item. Hence, the container associates the value with the key. These collections are most useful when you need to lookup/manipulate a collection using a key value. For example, if you wanted to look up an order in a collection of orders by an order id, you might have an associative collection where they key is the order id and the value is the order. The Dictionary<TKey,TVale> is probably the most used associative container class. The Dictionary<TKey,TValue> is the fastest class for associative lookups/inserts/deletes because it uses a hash table under the covers. Because the keys are hashed, the key type should correctly implement GetHashCode() and Equals() appropriately or you should provide an external IEqualityComparer to the dictionary on construction. The insert/delete/lookup time of items in the dictionary is amortized constant time - O(1) - which means no matter how big the dictionary gets, the time it takes to find something remains relatively constant. This is highly desirable for high-speed lookups. The only downside is that the dictionary, by nature of using a hash table, is unordered, so you cannot easily traverse the items in a Dictionary in order. The SortedDictionary<TKey,TValue> is similar to the Dictionary<TKey,TValue> in usage but very different in implementation. The SortedDictionary<TKey,TValye> uses a binary tree under the covers to maintain the items in order by the key. As a consequence of sorting, the type used for the key must correctly implement IComparable<TKey> so that the keys can be correctly sorted. The sorted dictionary trades a little bit of lookup time for the ability to maintain the items in order, thus insert/delete/lookup times in a sorted dictionary are logarithmic - O(log n). Generally speaking, with logarithmic time, you can double the size of the collection and it only has to perform one extra comparison to find the item. Use the SortedDictionary<TKey,TValue> when you want fast lookups but also want to be able to maintain the collection in order by the key. The SortedList<TKey,TValue> is the other ordered associative container class in the generic containers. Once again SortedList<TKey,TValue>, like SortedDictionary<TKey,TValue>, uses a key to sort key-value pairs. Unlike SortedDictionary, however, items in a SortedList are stored as an ordered array of items. This means that insertions and deletions are linear - O(n) - because deleting or adding an item may involve shifting all items up or down in the list. Lookup time, however is O(log n) because the SortedList can use a binary search to find any item in the list by its key. So why would you ever want to do this? Well, the answer is that if you are going to load the SortedList up-front, the insertions will be slower, but because array indexing is faster than following object links, lookups are marginally faster than a SortedDictionary. Once again I'd use this in situations where you want fast lookups and want to maintain the collection in order by the key, and where insertions and deletions are rare. The Non-Associative Containers The other container classes are non-associative. They don't use keys to manipulate the collection but rely on the object itself being stored or some other means (such as index) to manipulate the collection. The List<T> is a basic contiguous storage container. Some people may call this a vector or dynamic array. Essentially it is an array of items that grow once its current capacity is exceeded. Because the items are stored contiguously as an array, you can access items in the List<T> by index very quickly. However inserting and removing in the beginning or middle of the List<T> are very costly because you must shift all the items up or down as you delete or insert respectively. However, adding and removing at the end of a List<T> is an amortized constant operation - O(1). Typically List<T> is the standard go-to collection when you don't have any other constraints, and typically we favor a List<T> even over arrays unless we are sure the size will remain absolutely fixed. The LinkedList<T> is a basic implementation of a doubly-linked list. This means that you can add or remove items in the middle of a linked list very quickly (because there's no items to move up or down in contiguous memory), but you also lose the ability to index items by position quickly. Most of the time we tend to favor List<T> over LinkedList<T> unless you are doing a lot of adding and removing from the collection, in which case a LinkedList<T> may make more sense. The HashSet<T> is an unordered collection of unique items. This means that the collection cannot have duplicates and no order is maintained. Logically, this is very similar to having a Dictionary<TKey,TValue> where the TKey and TValue both refer to the same object. This collection is very useful for maintaining a collection of items you wish to check membership against. For example, if you receive an order for a given vendor code, you may want to check to make sure the vendor code belongs to the set of vendor codes you handle. In these cases a HashSet<T> is useful for super-quick lookups where order is not important. Once again, like in Dictionary, the type T should have a valid implementation of GetHashCode() and Equals(), or you should provide an appropriate IEqualityComparer<T> to the HashSet<T> on construction. The SortedSet<T> is to HashSet<T> what the SortedDictionary<TKey,TValue> is to Dictionary<TKey,TValue>. That is, the SortedSet<T> is a binary tree where the key and value are the same object. This once again means that adding/removing/lookups are logarithmic - O(log n) - but you gain the ability to iterate over the items in order. For this collection to be effective, type T must implement IComparable<T> or you need to supply an external IComparer<T>. Finally, the Stack<T> and Queue<T> are two very specific collections that allow you to handle a sequential collection of objects in very specific ways. The Stack<T> is a last-in-first-out (LIFO) container where items are added and removed from the top of the stack. Typically this is useful in situations where you want to stack actions and then be able to undo those actions in reverse order as needed. The Queue<T> on the other hand is a first-in-first-out container which adds items at the end of the queue and removes items from the front. This is useful for situations where you need to process items in the order in which they came, such as a print spooler or waiting lines. So that's the basic collections. Let's summarize what we've learned in a quick reference table.  Collection Ordered? Contiguous Storage? Direct Access? Lookup Efficiency Manipulate Efficiency Notes Dictionary No Yes Via Key Key: O(1) O(1) Best for high performance lookups. SortedDictionary Yes No Via Key Key: O(log n) O(log n) Compromise of Dictionary speed and ordering, uses binary search tree. SortedList Yes Yes Via Key Key: O(log n) O(n) Very similar to SortedDictionary, except tree is implemented in an array, so has faster lookup on preloaded data, but slower loads. List No Yes Via Index Index: O(1) Value: O(n) O(n) Best for smaller lists where direct access required and no ordering. LinkedList No No No Value: O(n) O(1) Best for lists where inserting/deleting in middle is common and no direct access required. HashSet No Yes Via Key Key: O(1) O(1) Unique unordered collection, like a Dictionary except key and value are same object. SortedSet Yes No Via Key Key: O(log n) O(log n) Unique ordered collection, like SortedDictionary except key and value are same object. Stack No Yes Only Top Top: O(1) O(1)* Essentially same as List<T> except only process as LIFO Queue No Yes Only Front Front: O(1) O(1) Essentially same as List<T> except only process as FIFO   The Original Collections: System.Collections namespace The original collection classes are largely considered deprecated by developers and by Microsoft itself. In fact they indicate that for the most part you should always favor the generic or concurrent collections, and only use the original collections when you are dealing with legacy .NET code. Because these collections are out of vogue, let's just briefly mention the original collection and their generic equivalents: ArrayList A dynamic, contiguous collection of objects. Favor the generic collection List<T> instead. Hashtable Associative, unordered collection of key-value pairs of objects. Favor the generic collection Dictionary<TKey,TValue> instead. Queue First-in-first-out (FIFO) collection of objects. Favor the generic collection Queue<T> instead. SortedList Associative, ordered collection of key-value pairs of objects. Favor the generic collection SortedList<T> instead. Stack Last-in-first-out (LIFO) collection of objects. Favor the generic collection Stack<T> instead. In general, the older collections are non-type-safe and in some cases less performant than their generic counterparts. Once again, the only reason you should fall back on these older collections is for backward compatibility with legacy code and libraries only. The Concurrent Collections: System.Collections.Concurrent namespace The concurrent collections are new as of .NET 4.0 and are included in the System.Collections.Concurrent namespace. These collections are optimized for use in situations where multi-threaded read and write access of a collection is desired. The concurrent queue, stack, and dictionary work much as you'd expect. The bag and blocking collection are more unique. Below is the summary of each with a link to a blog post I did on each of them. ConcurrentQueue Thread-safe version of a queue (FIFO). For more information see: C#/.NET Little Wonders: The ConcurrentStack and ConcurrentQueue ConcurrentStack Thread-safe version of a stack (LIFO). For more information see: C#/.NET Little Wonders: The ConcurrentStack and ConcurrentQueue ConcurrentBag Thread-safe unordered collection of objects. Optimized for situations where a thread may be bother reader and writer. For more information see: C#/.NET Little Wonders: The ConcurrentBag and BlockingCollection ConcurrentDictionary Thread-safe version of a dictionary. Optimized for multiple readers (allows multiple readers under same lock). For more information see C#/.NET Little Wonders: The ConcurrentDictionary BlockingCollection Wrapper collection that implement producers & consumers paradigm. Readers can block until items are available to read. Writers can block until space is available to write (if bounded). For more information see C#/.NET Little Wonders: The ConcurrentBag and BlockingCollection Summary The .NET BCL has lots of collections built in to help you store and manipulate collections of data. Understanding how these collections work and knowing in which situations each container is best is one of the key skills necessary to build more performant code. Choosing the wrong collection for the job can make your code much slower or even harder to maintain if you choose one that doesn’t perform as well or otherwise doesn’t exactly fit the situation. Remember to avoid the original collections and stick with the generic collections.  If you need concurrent access, you can use the generic collections if the data is read-only, or consider the concurrent collections for mixed-access if you are running on .NET 4.0 or higher.   Tweet Technorati Tags: C#,.NET,Collecitons,Generic,Concurrent,Dictionary,List,Stack,Queue,SortedList,SortedDictionary,HashSet,SortedSet

  Read the article

• Microsoft Declares the Future of ASP.NET is Web API

  - by sbwalker

  Sitting on a plane on my way home from Tech Ed 2012 in Orlando, I thought it would be a good time to jot down some key takeaways from this year’s conference. Some of these items I have known since the Microsoft MVP Summit which occurred in Redmond in late February ( but due to NDA restrictions I could not share them with the developer community at large ) and some of them are a result of insightful conversations with a wide variety of industry insiders and Microsoft employees at the conference. First, let’s travel back in time 4 years to the Microsoft MVP Summit in 2008. Microsoft was facing some heat from market newcomer Ruby on Rails and responded with a new web development framework of its own, ASP.NET MVC. At the Summit they estimated that MVC would only be applicable for ~10% of all new web development projects. Based on that prediction I questioned why they were investing such considerable resources for such a relative edge case, but my guess is that they felt it was an important edge case at the time as some of the more vocal .NET evangelists as well as some very high profile start-ups ( ie. Twitter ) had publicly announced their intent to use Rails. Microsoft made a lot of noise about MVC. In fact, they focused so much of their messaging and marketing hype around MVC that it appeared that WebForms was essentially dead. Yes, it may have been true that Microsoft continued to invest in WebForms, but from an outside perspective it really appeared that MVC was the only framework getting any real attention. As a result, MVC started to gain market share. An inside source at Microsoft told me that MVC usage has grown at a rate of about 5% per year and now sits at ~30%. Essentially by focusing so much marketing effort on MVC, Microsoft actually created a larger market demand for it.  This is because in the Microsoft ecosystem there is somewhat of a bandwagon mentality amongst developers. If Microsoft spends a lot of time talking about a specific technology, developers get the perception that it must be really important. So rather than choosing the right tool for the job, they often choose the tool with the most marketing hype and then try to sell it to the customer. In 2010, I blogged about the fact that MVC did not make any business sense for the DotNetNuke platform. This was because our ecosystem relied on third party extensions which were dependent on the WebForms model. If we migrated the core to MVC it would mean that all of the third party extensions would no longer be compatible, which would be an irresponsible business decision for us to make at the expense of our users and customers. However, this did not stop the debate from continuing to occur in our ecosystem. Clearly some developers had drunk Microsoft’s Kool-Aid about MVC and were of the mindset, to paraphrase an old Scottish saying, “If its not MVC, it’s crap”. Now, this is a rather ignorant position to take as most of the benefits of MVC can be achieved in WebForms with solid architecture and responsible coding practices. Clean separation of concerns, unit testing, and direct control over page output are all possible in the WebForms model – it just requires diligence and discipline. So over the past few years some horror stories have begun to bubble to the surface of software development projects focused on ground-up rewrites of web applications for the sole purpose of migrating from WebForms to MVC. These large scale rewrites were typically initiated by engineering teams with only a single argument driving the business decision, that Microsoft was promoting MVC as “the future”. These ill-fated rewrites offered no benefit to end users or customers and in fact resulted in a less stable, less scalable and more complicated systems – basically taking one step forward and two full steps back. A case in point is the announcement earlier this week that a popular open source .NET CMS provider has decided to pull the plug on their new MVC product which has been under active development for more than 18 months and revert back to WebForms. The availability of multiple server-side development models has deeply fragmented the Microsoft developer community. Some folks like to compare it to the age-old VB vs. C# language debate. However, the VB vs. C# language debate was ultimately more of a religious war because at least the two dominant programming languages were compatible with one another and could be used interchangeably. The issue with WebForms vs. MVC is much more challenging. This is because the messaging from Microsoft has positioned the two solutions as being incompatible with one another and as a result web developers feel like they are forced to choose one path or another. Yes, it is true that it has always been technically possible to use WebForms and MVC in the same project, but the tooling support has always made this feel “dirty”. The fragmentation has also made it difficult to attract newcomers as the perceived barrier to entry for learning ASP.NET has become higher. As a result many new software developers entering the market are gravitating to environments where the development model seems more simple and intuitive ( ie. PHP or Ruby ). At the same time that the Web Platform team was busy promoting ASP.NET MVC, the Microsoft Office team has been promoting Sharepoint as a platform for building internal enterprise web applications. Sharepoint has great penetration in the enterprise and over time has been enhanced with improved extensibility capabilities for software developers. But, like many other mature enterprise ASP.NET web applications, it is built on the WebForms development model. Similar to DotNetNuke, Sharepoint leverages a rich third party ecosystem for both generic web controls and more specialized WebParts – both of which rely on WebForms. So basically this resulted in a situation where the Web Platform group had headed off in one direction and the Office team had gone in another direction, and the end customer was stuck in the middle trying to figure out what to do with their existing investments in Microsoft technology. It really emphasized the perception that the left hand was not speaking to the right hand, as strategically speaking there did not seem to be any high level plan from Microsoft to ensure consistency and continuity across the different product lines. With the introduction of ASP.NET MVC, it also made some of the third party control vendors scratch their heads, and wonder what the heck Microsoft was thinking. The original value proposition of ASP.NET over Classic ASP was the ability for web developers to emulate the highly productive desktop development model by using abstract components for creating rich, interactive web interfaces. Web control vendors like Telerik, Infragistics, DevExpress, and ComponentArt had all built sizable businesses offering powerful user interface components to WebForms developers. And even after MVC was introduced these vendors continued to improve their products, offering greater productivity and a superior user experience via AJAX to what was possible in MVC. And since many developers were comfortable and satisfied with these third party solutions, the demand remained strong and the third party web control market continued to prosper despite the availability of MVC. While all of this was going on in the Microsoft ecosystem, there has also been a fundamental shift in the general software development industry. Driven by the explosion of Internet-enabled devices, the focus has now centered on service-oriented architecture (SOA). Service-oriented architecture is all about defining a public API for your product that any client can consume; whether it’s a native application running on a smart phone or tablet, a web browser taking advantage of HTML5 and Javascript, or a rich desktop application running on a PC. REST-based services which utilize the less verbose characteristics of JSON as a transport mechanism, have become the preferred approach over older, more bloated SOAP-based techniques. SOA also has the benefit of producing a cross-platform API, as every major technology stack is able to interact with standard REST-based web services. And for web applications, more and more developers are turning to robust Javascript libraries like JQuery and Knockout for browser-based client-side development techniques for calling web services and rendering content to end users. In fact, traditional server-side page rendering has largely fallen out of favor, resulting in decreased demand for server-side frameworks like Ruby on Rails, WebForms, and (gasp) MVC. In response to these new industry trends, Microsoft did what it always does – it immediately poured some resources into developing a solution which will ensure they remain relevant and competitive in the web space. This work culminated in a new framework which was branded as Web API. It is convention-based and designed to embrace native HTTP standards without copious layers of abstraction. This framework is designed to be the ultimate replacement for both the REST aspects of WCF and ASP.NET MVC Web Services. And since it was developed out of band with a dependency only on ASP.NET 4.0, it means that it can be used immediately in a variety of production scenarios. So at Tech Ed 2012 it was made abundantly clear in numerous sessions that Microsoft views Web API as the “Future of ASP.NET”. In fact, one Microsoft PM even went as far as to say that if we look 3-4 years into the future, that all ASP.NET web applications will be developed using the Web API approach. This is a fairly bold prediction and clearly telegraphs where Microsoft plans to allocate its resources going forward. Currently Web API is being delivered as part of the MVC4 package, but this is only temporary for the sake of convenience. It also sounds like there are still internal discussions going on in terms of how to brand the various aspects of ASP.NET going forward – perhaps the moniker of “ASP.NET Web Stack” coined a couple years ago by Scott Hanselman and utilized as part of the open source release of ASP.NET bits on Codeplex a few months back will eventually stick. Web API is being positioned as the unification of ASP.NET – the glue that is able to pull this fragmented mess back together again. The  “One ASP.NET” strategy will promote the use of all frameworks - WebForms, MVC, and Web API, even within the same web project. Basically the message is utilize the appropriate aspects of each framework to solve your business problems. Instead of navigating developers to a fork in the road, the plan is to educate them that “hybrid” applications are a great strategy for delivering solutions to customers. In addition, the service-oriented approach coupled with client-side development promoted by Web API can effectively be used in both WebForms and MVC applications. So this means it is also relevant to application platforms like DotNetNuke and Sharepoint, which means that it starts to create a unified development strategy across all ASP.NET product lines once again. And so what about MVC? There have actually been rumors floated that MVC has reached a stage of maturity where, similar to WebForms, it will be treated more as a maintenance product line going forward ( MVC4 may in fact be the last significant iteration of this framework ). This may sound alarming to some folks who have recently adopted MVC but it really shouldn’t, as both WebForms and MVC will continue to play a vital role in delivering solutions to customers. They will just not be the primary area where Microsoft is spending the majority of its R&D resources. That distinction will obviously go to Web API. And when the question comes up of why not enhance MVC to make it work with Web API, you must take a step back and look at this from the higher level to see that it really makes no sense. MVC is a server-side page compositing framework; whereas, Web API promotes client-side page compositing with a heavy focus on web services. In order to make MVC work well with Web API, would require a complete rewrite of MVC and at the end of the day, there would be no upgrade path for existing MVC applications. So it really does not make much business sense. So what does this have to do with DotNetNuke? Well, around 8-12 months ago we recognized the software industry trends towards web services and client-side development. We decided to utilize a “hybrid” model which would provide compatibility for existing modules while at the same time provide a bridge for developers who wanted to utilize more modern web techniques. Customers who like the productivity and familiarity of WebForms can continue to build custom modules using the traditional approach. However, in DotNetNuke 6.2 we also introduced a new Service Framework which is actually built on top of MVC2 ( we chose to leverage MVC because it had the most intuitive, light-weight REST implementation in the .NET stack ). The Services Framework allowed us to build some rich interactive features in DotNetNuke 6.2, including the Messaging and Notification Center and Activity Feed. But based on where we know Microsoft is heading, it makes sense for the next major version of DotNetNuke ( which is expected to be released in Q4 2012 ) to migrate from MVC2 to Web API. This will likely result in some breaking changes in the Services Framework but we feel it is the best approach for ensuring the platform remains highly modern and relevant. The fact that our development strategy is perfectly aligned with the “One ASP.NET” strategy from Microsoft means that our customers and developer community can be confident in their current and future investments in the DotNetNuke platform.

  Read the article

• Stored Procedures with SSRS? Hmm… not so much

  - by Rob Farley

  Little Bobby Tables’ mother says you should always sanitise your data input. Except that I think she’s wrong. The SQL Injection aspect is for another post, where I’ll show you why I think SQL Injection is the same kind of attack as many other attacks, such as the old buffer overflow, but here I want to have a bit of a whinge about the way that some people sanitise data input, and even have a whinge about people who insist on using stored procedures for SSRS reports. Let me say that again, in case you missed it the first time: I want to have a whinge about people who insist on using stored procedures for SSRS reports. Let’s look at the data input sanitisation aspect – except that I’m going to call it ‘parameter validation’. I’m talking about code that looks like this: create procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     /* First check that @eomdate is a valid date */     if isdate(@eomdate) != 1     begin         select 'Please enter a valid date' as ErrorMessage;         return;     end     /* Then check that time has passed since @eomdate */     if datediff(day,@eomdate,sysdatetime()) < 5     begin         select 'Sorry - EOM is not complete yet' as ErrorMessage;         return;     end         /* If those checks have succeeded, return the data */     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales     from Sales.SalesOrderHeader     where OrderDate >= dateadd(month,-1,@eomdate)         and OrderDate < @eomdate     group by SalesPersonID     order by SalesPersonID; end Notice that the code checks that a date has been entered. Seriously??!! This must only be to check for NULL values being passed in, because anything else would have to be a valid datetime to avoid an error. The other check is maybe fair enough, but I still don’t like it. The two problems I have with this stored procedure are the result sets and the small fact that the stored procedure even exists in the first place. But let’s consider the first one of these problems for starters. I’ll get to the second one in a moment. If you read Jes Borland (@grrl_geek)’s recent post about returning multiple result sets in Reporting Services, you’ll be aware that Reporting Services doesn’t support multiple results sets from a single query. And when it says ‘single query’, it includes ‘stored procedure call’. It’ll only handle the first result set that comes back. But that’s okay – we have RETURN statements, so our stored procedure will only ever return a single result set.  Sometimes that result set might contain a single field called ErrorMessage, but it’s still only one result set. Except that it’s not okay, because Reporting Services needs to know what fields to expect. Your report needs to hook into your fields, so SSRS needs to have a way to get that information. For stored procs, it uses an option called FMTONLY. When Reporting Services tries to figure out what fields are going to be returned by a query (or stored procedure call), it doesn’t want to have to run the whole thing. That could take ages. (Maybe it’s seen some of the stored procedures I’ve had to deal with over the years!) So it turns on FMTONLY before it makes the call (and turns it off again afterwards). FMTONLY is designed to be able to figure out the shape of the output, without actually running the contents. It’s very useful, you might think. set fmtonly on exec dbo.GetMonthSummaryPerSalesPerson '20030401'; set fmtonly off Without the FMTONLY lines, this stored procedure returns a result set that has three columns and fourteen rows. But with FMTONLY turned on, those rows don’t come back. But what I do get back hurts Reporting Services. It doesn’t run the stored procedure at all. It just looks for anything that could be returned and pushes out a result set in that shape. Despite the fact that I’ve made sure that the logic will only ever return a single result set, the FMTONLY option kills me by returning three of them. It would have been much better to push these checks down into the query itself. alter procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     order by SalesPersonID; end Now if we run it with FMTONLY turned on, we get the single result set back. But let’s consider the execution plan when we pass in an invalid date. First let’s look at one that returns data. I’ve got a semi-useful index in place on OrderDate, which includes the SalesPersonID and TotalDue fields. It does the job, despite a hefty Sort operation. …compared to one that uses a future date: You might notice that the estimated costs are similar – the Index Seek is still 28%, the Sort is still 71%. But the size of that arrow coming out of the Index Seek is a whole bunch smaller. The coolest thing here is what’s going on with that Index Seek. Let’s look at some of the properties of it. Glance down it with me… Estimated CPU cost of 0.0005728, 387 estimated rows, estimated subtree cost of 0.0044385, ForceSeek false, Number of Executions 0. That’s right – it doesn’t run. So much for reading plans right-to-left... The key is the Filter on the left of it. It has a Startup Expression Predicate in it, which means that it doesn’t call anything further down the plan (to the right) if the predicate evaluates to false. Using this method, we can make sure that our stored procedure contains a single query, and therefore avoid any problems with multiple result sets. If we wanted, we could always use UNION ALL to make sure that we can return an appropriate error message. alter procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales, /*Placeholder: */ '' as ErrorMessage     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     /* Now include the error messages */     union all     select 0, 0, 0, 'Please enter a valid date' as ErrorMessage     where isdate(@eomdate) != 1     union all     select 0, 0, 0, 'Sorry - EOM is not complete yet' as ErrorMessage     where datediff(day,@eomdate,sysdatetime()) < 5     order by SalesPersonID; end But still I don’t like it, because it’s now a stored procedure with a single query. And I don’t like stored procedures that should be functions. That’s right – I think this should be a function, and SSRS should call the function. And I apologise to those of you who are now planning a bonfire for me. Guy Fawkes’ night has already passed this year, so I think you miss out. (And I’m not going to remind you about when the PASS Summit is in 2012.) create function dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) returns table as return (     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales, '' as ErrorMessage     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     union all     select 0, 0, 0, 'Please enter a valid date' as ErrorMessage     where isdate(@eomdate) != 1     union all     select 0, 0, 0, 'Sorry - EOM is not complete yet' as ErrorMessage     where datediff(day,@eomdate,sysdatetime()) < 5 ); We’ve had to lose the ORDER BY – but that’s fine, as that’s a client thing anyway. We can have our reports leverage this stored query still, but we’re recognising that it’s a query, not a procedure. A procedure is designed to DO stuff, not just return data. We even get entries in sys.columns that confirm what the shape of the result set actually is, which makes sense, because a table-valued function is the right mechanism to return data. And we get so much more flexibility with this. If you haven’t seen the simplification stuff that I’ve preached on before, jump over to http://bit.ly/SimpleRob and watch the video of when I broke a microphone and nearly fell off the stage in Wales. You’ll see the impact of being able to have a simplifiable query. You can also read the procedural functions post I wrote recently, if you didn’t follow the link from a few paragraphs ago. So if we want the list of SalesPeople that made any kind of sales in a given month, we can do something like: select SalesPersonID from dbo.GetMonthSummaryPerSalesPerson(@eomonth) order by SalesPersonID; This doesn’t need to look up the TotalDue field, which makes a simpler plan. select * from dbo.GetMonthSummaryPerSalesPerson(@eomonth) where SalesPersonID is not null order by SalesPersonID; This one can avoid having to do the work on the rows that don’t have a SalesPersonID value, pushing the predicate into the Index Seek rather than filtering the results that come back to the report. If we had joins involved, we might see some of those being simplified out. We also get the ability to include query hints in individual reports. We shift from having a single-use stored procedure to having a reusable stored query – and isn’t that one of the main points of modularisation? Stored procedures in Reporting Services are just a bit limited for my liking. They’re useful in plenty of ways, but if you insist on using stored procedures all the time rather that queries that use functions – that’s rubbish. @rob_farley

  Read the article

• VS 2012 Code Review &ndash; Before Check In OR After Check In?

  - by Tarun Arora

  “Is Code Review Important and Effective?” There is a consensus across the industry that code review is an effective and practical way to collar code inconsistency and possible defects early in the software development life cycle. Among others some of the advantages of code reviews are, Bugs are found faster Forces developers to write readable code (code that can be read without explanation or introduction!) Optimization methods/tricks/productive programs spread faster Programmers as specialists "evolve" faster It's fun “Code review is systematic examination (often known as peer review) of computer source code. It is intended to find and fix mistakes overlooked in the initial development phase, improving both the overall quality of software and the developers' skills. Reviews are done in various forms such as pair programming, informal walkthroughs, and formal inspections.” Wikipedia No where does the definition mention whether its better to review code before the code has been committed to version control or after the commit has been performed. No matter which side you favour, Visual Studio 2012 allows you to request for a code review both before check in and also request for a review after check in. Let’s weigh the pros and cons of the approaches independently. Code Review Before Check In or Code Review After Check In? Approach 1 – Code Review before Check in Developer completes the code and feels the code quality is appropriate for check in to TFS. The developer raises a code review request to have a second pair of eyes validate if the code abides to the recommended best practices, will not result in any defects due to common coding mistakes and whether any optimizations can be made to improve the code quality.                                             Image 1 – code review before check in Pros Everything that gets committed to source control is reviewed. Minimizes the chances of smelly code making its way into the code base. Decreases the cost of fixing bugs, remember, the earlier you find them, the lesser the pain in fixing them. Cons Development Code Freeze – Since the changes aren’t in the source control yet. Further development can only be done off-line. The changes have not been through a CI build, hard to say whether the code abides to all build quality standards. Inconsistent! Cumbersome to track the actual code review process.  Not every change to the code base is worth reviewing, a lot of effort is invested for very little gain. Approach 2 – Code Review after Check in Developer checks in, random code reviews are performed on the checked in code.                                                      Image 2 – Code review after check in Pros The code has already passed the CI build and run through any code analysis plug ins you may have running on the build server. Instruct the developer to ensure ZERO fx cop, style cop and static code analysis before check in. Code is cleaner and smell free even before the code review. No Offline development, developers can continue to develop against the source control. Cons Bad code can easily make its way into the code base. Since the review take place much later in the cycle, the cost of fixing issues can prove to be much higher. Approach 3 – Hybrid Approach The community advocates a more hybrid approach, a blend of tooling and human accountability quotient.                                                               Image 3 – Hybrid Approach 1. Code review high impact check ins. It is not possible to review everything, by setting up code review check in policies you can end up slowing your team. More over, the code that you are reviewing before check in hasn't even been through a green CI build either. 2. Tooling. Let the tooling work for you. By running static analysis, fx cop, style cop and other plug ins on the build agent, you can identify the real issues that in my opinion can't possibly be identified using human reviews. Configure the tooling to report back top 10 issues every day. Mandate the manual code review of individuals who keep making it to this list of shame more often. 3. During Merge. I would prefer eliminating some of the other code issues during merge from Main branch to the release branch. In a scrum project this is still easier because cheery picking the merges is a possibility and the size of code being reviewed is still limited. Let the tooling work for you, if some one breaks the CI build often, put them on a gated check in build course until you see improvement. If some one appears on the top 10 list of shame generated via the build then ensure that all their code is reviewed till you see improvement. At the end of the day, the goal is to ensure that the code being delivered is top quality. By enforcing a code review before any check in, you force the developer to work offline or stay put till the review is complete. What do the experts say? So I asked a few expects what they thought of “Code Review quality gate before Checking in code?" Terje Sandstrom | Microsoft ALM MVP You mean a review quality gate BEFORE checking in code????? That would mean a lot of code staying either local or in shelvesets, and not even been through a CI build, and a green CI build being the main criteria for going further, f.e. to the review state. I would not like code laying around with no checkin’s. Having a requirement that code is checked in small pieces, 4-8 hours work max, and AT LEAST daily checkins, a manual code review comes second down the lane. I would expect review quality gates to happen before merging back to main, or before merging to release.  But that would all be on checked-in code.  Branching is absolutely one way to ease the pain.   Another way we are using is automatic quality builds, running metrics, coverage, static code analysis.  Unfortunately it takes some time, would be great to be on CI’s – but…., so it’s done scheduled every night. Based on this we get, among other stuff,  top 10 lists of suspicious code, which is then subjected to reviews.  If a person seems to be very popular on these top 10 lists, we subject every check in from that person to a review for a period. That normally helps.   None of the clients I have can afford to have every checkin reviewed, so we need to find ways around it. I don’t disagree with the nicety of having all the code reviewed, but I find it hard to find those resources in today’s enterprises. David V. Corbin | Visual Studio ALM Ranger I tend to agree with both sides. I hate having code that is not checked in, but at the same time hate having “bad” code in the repository. I have found that branching is one approach to solving this dilemma. Code is checked into the private/feature branch before the review, but is not merged over to the “official” branch until after the review. I advocate both, depending on circumstance (especially team dynamics)   - The “pre-checkin” is usually for elements that may impact the project as a whole. Think of it as another “gate” along with passing unit tests. - The “post-checkin” may very well not be at the changeset level, but correlates to a review at the “user story” level.   Again, this depends on team dynamics in play…. Robert MacLean | Microsoft ALM MVP I do not think there is no right answer for the industry as a whole. In short the question is why do you do reviews? Your question implies risk mitigation, so in low risk areas you can get away with it after check in while in high risk you need to do it before check in. An example is those new to a team or juniors need it much earlier (maybe that is before checkin, maybe that is soon after) than seniors who have shipped twenty sprints on the team. Abhimanyu Singhal | Visual Studio ALM Ranger Depends on per scenario basis. We recommend post check-in reviews when: 1. We don't want to block other checks and processes on manual code reviews. Manual reviews take time, and some pieces may not require manual reviews at all. 2. We need to trace all changes and track history. 3. We have a code promotion strategy/process in place. For risk mitigation, post checkin code can be promoted to Accepted branches. Or can be rejected. Pre Checkin Reviews are used when 1. There is a high risk factor associated 2. Reviewers are generally (most of times) have immediate availability. 3. Team does not have strict tracking needs. Simply speaking, no single process fits all scenarios. You need to select what works best for your team/project. Thomas Schissler | Visual Studio ALM Ranger This is an interesting discussion, I’m right now discussing details about executing code reviews with my teams. I see and understand the aspects you brought in, but there is another side as well, I’d like to point out. 1.) If you do reviews per check in this is not very practical as a hard rule because this will disturb the flow of the team very often or it will lead to reduce the checkin frequency of the devs which I would not accept. 2.) If you do later reviews, for example if you review PBIs, it is not easy to find out which code you should review. Either you review all changesets associate with the PBI, but then you might review code which has been changed with a later checkin and the dev maybe has already fixed the issue. Or you review the diff of the latest changeset of the PBI with the first but then you might also review changes of other PBIs. Jakob Leander | Sr. Director, Avanade In my experience, manual code review: 1. Does not get done and at the very least does not get redone after changes (regardless of intentions at start of project) 2. When a project actually do it, they often do not do it right away = errors pile up 3. Requires a lot of time discussing/defining the standard and for the team to learn it However code review is very important since e.g. even small memory leaks in a high volume web solution have big consequences In the last years I have advocated following approach for code review - Architects up front do “at least one best practice example” of each type of component and tell the team. Copy from this one. This should include error handling, logging, security etc. - Dev lead on project continuously browse code to validate that the best practices are used. Especially that patterns etc. are not broken. You can do this formally after each sprint/iteration if you want. Once this is validated it is unlikely to “go bad” even during later code changes Agree with customer to rely on static code analysis from Visual Studio as the one and only coding standard. This has HUUGE benefits - You can easily tweak to reach the level you desire together with customer - It is easy to measure for both developers/management - It is 100% consistent across code base - It gets validated all the time so you never end up getting hammered by a customer review in the end - It is easy to tell the developer that you do not want code back unless it has zero errors = minimize communication You need to track this at least during nightly builds and make sure team sees total # issues. Do not allow #issues it to grow uncontrolled. On the project I run I require code analysis to have run on code before checkin (checkin rule). This means -  You have to have clean compile (or CA wont run) so this is extra benefit = very few broken builds - You can change a few of the rules to compile as errors instead of warnings. I often do this for “missing dispose” issues which you REALLY do not want in your app Tip: Place your custom CA rules files as part of solution. That  way it works when you do branching etc. (path to CA file is relative in VS) Some may argue that CA is not as good as manual inspection. But since manual inspection in reality suffers from the 3 issues in start it is IMO a MUCH better (and much cheaper) approach from helicopter perspective Tirthankar Dutta | Director, Avanade I think code review should be run both before and after check ins. There are some code metrics that are meant to be run on the entire codebase … Also, especially on multi-site projects, one should strive to architect in a way that lets men manage the framework while boys write the repetitive code… scales very well with the need to review less by containment and imposing architectural restrictions to emphasise the design. Bruno Capuano | Microsoft ALM MVP For code reviews (means peer reviews) in distributed team I use http://www.vsanywhere.com/default.aspx  David Jobling | Global Sr. Director, Avanade Peer review is the only way to scale and its a great practice for all in the team to learn to perform and accept. In my experience you soon learn who's code to watch more than others and tune the attention. Mikkel Toudal Kristiansen | Manager, Avanade If you have several branches in your code base, you will need to merge often. This requires manual merging, when a file has been changed in both branches. It offers a good opportunity to actually review to changed code. So my advice is: Merging between branches should be done as often as possible, it should be done by a senior developer, and he/she should perform a full code review of the code being merged. As for detecting architectural smells and code smells creeping into the code base, one really good third party tools exist: Ndepend (http://www.ndepend.com/, for static code analysis of the current state of the code base). You could also consider adding StyleCop to the solution. Jesse Houwing | Visual Studio ALM Ranger I gave a presentation on this subject on the TechDays conference in NL last year. See my presentation and slides here (talk in Dutch, but English presentation): http://blog.jessehouwing.nl/2012/03/did-you-miss-my-techdaysnl-talk-on-code.html  I’d like to add a few more points: - Before/After checking is mostly a trust issue. If you have a team that does diligent peer reviews and regularly talk/sit together or peer review, there’s no need to enforce a before-checkin policy. The peer peer-programming and regular feedback during development can take care of most of the review requirements as long as the team isn’t under stress. - Under stress, enforce pre-checkin reviews, it might sound strange, if you’re already under time or budgetary constraints, but it is under such conditions most real issues start to be created or pile up. - Use tools to catch most common errors, Code Analysis/FxCop was already mentioned. HP Fortify, Resharper, Coderush etc can help you there. There are also a lot of 3rd party rules you can add to Code Analysis. I’ve written a few myself (http://fccopcontrib.codeplex.com) and various teams from Microsoft have added their own rules (MSOCAF for SharePoint, WSSF for WCF). For common errors that keep cropping up, see if you can define a rule. It’s much easier. But more importantly make sure you have a good help page explaining *WHY* it's wrong. If you have small feature or developer branches/shelvesets, you might want to review pre-merge. It’s still better to do peer reviews and peer programming, but the most important thing is that bad quality code doesn’t make it into the important branch. So my philosophy: - Use tooling as much as possible. - Make sure the team understands the tooling and the importance of the things it flags. It’s too easy to just click suppress all to ignore the warnings. - Under stress, tighten process, it’s under stress that the problems of late reviews will really surface - Most importantly if you do reviews do them as early as possible, but never later than needed. In other words, pre-checkin/post checking doesn’t really matter, as long as the review is done before the code is released. It’ll just be much more expensive to fix any review outcomes the later you find them. --- I would love to hear what you think!

  Read the article

• A Communication System for XAML Applications

  - by psheriff

  In any application, you want to keep the coupling between any two or more objects as loose as possible. Coupling happens when one class contains a property that is used in another class, or uses another class in one of its methods. If you have this situation, then this is called strong or tight coupling. One popular design pattern to help with keeping objects loosely coupled is called the Mediator design pattern. The basics of this pattern are very simple; avoid one object directly talking to another object, and instead use another class to mediate between the two. As with most of my blog posts, the purpose is to introduce you to a simple approach to using a message broker, not all of the fine details. IPDSAMessageBroker Interface As with most implementations of a design pattern, you typically start with an interface or an abstract base class. In this particular instance, an Interface will work just fine. The interface for our Message Broker class just contains a single method “SendMessage” and one event “MessageReceived”. public delegate void MessageReceivedEventHandler( object sender, PDSAMessageBrokerEventArgs e); public interface IPDSAMessageBroker{  void SendMessage(PDSAMessageBrokerMessage msg);   event MessageReceivedEventHandler MessageReceived;} PDSAMessageBrokerMessage Class As you can see in the interface, the SendMessage method requires a type of PDSAMessageBrokerMessage to be passed to it. This class simply has a MessageName which is a ‘string’ type and a MessageBody property which is of the type ‘object’ so you can pass whatever you want in the body. You might pass a string in the body, or a complete Customer object. The MessageName property will help the receiver of the message know what is in the MessageBody property. public class PDSAMessageBrokerMessage{  public PDSAMessageBrokerMessage()  {  }   public PDSAMessageBrokerMessage(string name, object body)  {    MessageName = name;    MessageBody = body;  }   public string MessageName { get; set; }   public object MessageBody { get; set; }} PDSAMessageBrokerEventArgs Class As our message broker class will be raising an event that others can respond to, it is a good idea to create your own event argument class. This class will inherit from the System.EventArgs class and add a couple of additional properties. The properties are the MessageName and Message. The MessageName property is simply a string value. The Message property is a type of a PDSAMessageBrokerMessage class. public class PDSAMessageBrokerEventArgs : EventArgs{  public PDSAMessageBrokerEventArgs()  {  }   public PDSAMessageBrokerEventArgs(string name,     PDSAMessageBrokerMessage msg)  {    MessageName = name;    Message = msg;  }   public string MessageName { get; set; }   public PDSAMessageBrokerMessage Message { get; set; }} PDSAMessageBroker Class Now that you have an interface class and a class to pass a message through an event, it is time to create your actual PDSAMessageBroker class. This class implements the SendMessage method and will also create the event handler for the delegate created in your Interface. public class PDSAMessageBroker : IPDSAMessageBroker{  public void SendMessage(PDSAMessageBrokerMessage msg)  {    PDSAMessageBrokerEventArgs args;     args = new PDSAMessageBrokerEventArgs(      msg.MessageName, msg);     RaiseMessageReceived(args);  }   public event MessageReceivedEventHandler MessageReceived;   protected void RaiseMessageReceived(    PDSAMessageBrokerEventArgs e)  {    if (null != MessageReceived)      MessageReceived(this, e);  }} The SendMessage method will take a PDSAMessageBrokerMessage object as an argument. It then creates an instance of a PDSAMessageBrokerEventArgs class, passing to the constructor two items: the MessageName from the PDSAMessageBrokerMessage object and also the object itself. It may seem a little redundant to pass in the message name when that same message name is part of the message, but it does make consuming the event and checking for the message name a little cleaner – as you will see in the next section. Create a Global Message Broker In your WPF application, create an instance of this message broker class in the App class located in the App.xaml file. Create a public property in the App class and create a new instance of that class in the OnStartUp event procedure as shown in the following code: public partial class App : Application{  public PDSAMessageBroker MessageBroker { get; set; }   protected override void OnStartup(StartupEventArgs e)  {    base.OnStartup(e);     MessageBroker = new PDSAMessageBroker();  }} Sending and Receiving Messages Let’s assume you have a user control that you load into a control on your main window and you want to send a message from that user control to the main window. You might have the main window display a message box, or put a string into a status bar as shown in Figure 1. Figure 1: The main window can receive and send messages The first thing you do in the main window is to hook up an event procedure to the MessageReceived event of the global message broker. This is done in the constructor of the main window: public MainWindow(){  InitializeComponent();   (Application.Current as App).MessageBroker.     MessageReceived += new MessageReceivedEventHandler(       MessageBroker_MessageReceived);} One piece of code you might not be familiar with is accessing a property defined in the App class of your XAML application. Within the App.Xaml file is a class named App that inherits from the Application object. You access the global instance of this App class by using Application.Current. You cast Application.Current to ‘App’ prior to accessing any of the public properties or methods you defined in the App class. Thus, the code (Application.Current as App).MessageBroker, allows you to get at the MessageBroker property defined in the App class. In the MessageReceived event procedure in the main window (shown below) you can now check to see if the MessageName property of the PDSAMessageBrokerEventArgs is equal to “StatusBar” and if it is, then display the message body into the status bar text block control. void MessageBroker_MessageReceived(object sender,   PDSAMessageBrokerEventArgs e){  switch (e.MessageName)  {    case "StatusBar":      tbStatus.Text = e.Message.MessageBody.ToString();      break;  }} In the Page 1 user control’s Loaded event procedure you will send the message “StatusBar” through the global message broker to any listener using the following code: private void UserControl_Loaded(object sender,  RoutedEventArgs e){  // Send Status Message  (Application.Current as App).MessageBroker.    SendMessage(new PDSAMessageBrokerMessage("StatusBar",      "This is Page 1"));} Since the main window is listening for the message ‘StatusBar’, it will display the value “This is Page 1” in the status bar at the bottom of the main window. Sending a Message to a User Control The previous example sent a message from the user control to the main window. You can also send messages from the main window to any listener as well. Remember that the global message broker is really just a broadcaster to anyone who has hooked into the MessageReceived event. In the constructor of the user control named ucPage1 you can hook into the global message broker’s MessageReceived event. You can then listen for any messages that are sent to this control by using a similar switch-case structure like that in the main window. public ucPage1(){  InitializeComponent();   // Hook to the Global Message Broker  (Application.Current as App).MessageBroker.    MessageReceived += new MessageReceivedEventHandler(      MessageBroker_MessageReceived);} void MessageBroker_MessageReceived(object sender,  PDSAMessageBrokerEventArgs e){  // Look for messages intended for Page 1  switch (e.MessageName)  {    case "ForPage1":      MessageBox.Show(e.Message.MessageBody.ToString());      break;  }} Once the ucPage1 user control has been loaded into the main window you can then send a message using the following code: private void btnSendToPage1_Click(object sender,  RoutedEventArgs e){  PDSAMessageBrokerMessage arg =     new PDSAMessageBrokerMessage();   arg.MessageName = "ForPage1";  arg.MessageBody = "Message For Page 1";   // Send a message to Page 1  (Application.Current as App).MessageBroker.SendMessage(arg);} Since the MessageName matches what is in the ucPage1 MessageReceived event procedure, ucPage1 can do anything in response to that event. It is important to note that when the message gets sent it is sent to all MessageReceived event procedures, not just the one that is looking for a message called “ForPage1”. If the user control ucPage1 is not loaded and this message is broadcast, but no other code is listening for it, then it is simply ignored. Remove Event Handler In each class where you add an event handler to the MessageReceived event you need to make sure to remove those event handlers when you are done. Failure to do so can cause a strong reference to the class and thus not allow that object to be garbage collected. In each of your user control’s make sure in the Unloaded event to remove the event handler. private void UserControl_Unloaded(object sender, RoutedEventArgs e){  if (_MessageBroker != null)    _MessageBroker.MessageReceived -=         _MessageBroker_MessageReceived;} Problems with Message Brokering As with most “global” classes or classes that hook up events to other classes, garbage collection is something you need to consider. Just the simple act of hooking up an event procedure to a global event handler creates a reference between your user control and the message broker in the App class. This means that even when your user control is removed from your UI, the class will still be in memory because of the reference to the message broker. This can cause messages to still being handled even though the UI is not being displayed. It is up to you to make sure you remove those event handlers as discussed in the previous section. If you don’t, then the garbage collector cannot release those objects. Instead of using events to send messages from one object to another you might consider registering your objects with a central message broker. This message broker now becomes a collection class into which you pass an object and what messages that object wishes to receive. You do end up with the same problem however. You have to un-register your objects; otherwise they still stay in memory. To alleviate this problem you can look into using the WeakReference class as a method to store your objects so they can be garbage collected if need be. Discussing Weak References is beyond the scope of this post, but you can look this up on the web. Summary In this blog post you learned how to create a simple message broker system that will allow you to send messages from one object to another without having to reference objects directly. This does reduce the coupling between objects in your application. You do need to remember to get rid of any event handlers prior to your objects going out of scope or you run the risk of having memory leaks and events being called even though you can no longer access the object that is responding to that event. NOTE: You can download the sample code for this article by visiting my website at http://www.pdsa.com/downloads. Select “Tips & Tricks”, then select “A Communication System for XAML Applications” from the drop down list.

  Read the article

• CodePlex Daily Summary for Saturday, March 17, 2012

  CodePlex Daily Summary for Saturday, March 17, 2012Popular ReleasesAutoSPEditor: AutoSPEditor Installer: Installs the current version of the AutoSPEditor using ClickOnce. Your application will be updated automatically.Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valuePulse: Pulse Beta 4: This version is still in development but should include: Logging and error handling have been greatly improved. If you run into an error or Pulse crashes make sure to check the Log folder for a recently modified log file so you can report the details of the issue A bunch of new features for the Wallbase.cc provider. Cleaner separation between inputs, downloading and output. Input and downloading are fairly clean now but outputs are still mixed up in the mix which I'm trying to resolve ...Google Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Release Candidate: Your feedback is welcome - and this is your last chance to get your fixes in for this version! Includes installer for both Feature Server extension and Desktop extension, enhanced functionality for the Desktop tools, and enhanced built-in Javascript Editor for the Feature Server component. This release candidate includes fixes to beta 4 that accommodate domain users for setting up the Server Component, and fixes for reporting/uploading references tracked in the revision table. See Code In-P...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...Windows Azure Toolkit for Windows 8: Windows Azure Toolkit for Windows 8 Consumer Prv: Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.1Minor updates to setup experience: Check for WebPI before install Dependency Check updated to support the following VS 11 and VS 2010 SKUs Ultimate, Premium, Professional and Express Certs Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.0 Please download this for Windows Azure Toolkit for Windows 8 functionality on Windows 8 Consumer Preview. The core features of the toolkit include:...Facebook Graph Toolkit: Facebook Graph Toolkit 3.0: ships with JSON Toolkit v3.0, offering parse speed up to 10 times of last version supports Facebook's new auth dialog supports new extend access token endpoint new example Page Tab app filter Graph Api connections using dates fixed bugs in Page Tab appsCODE Framework: 4.0.20312.0: This version includes significant improvements in the WPF system (and the WPF MVVM/MVC system). This includes new styles for Metro controls and layouts. Improved color handling. It also includes an improved theme/style swapping engine down to active (open) views. There also are various other enhancements and small fixes throughout the entire framework.ScintillaNET: ScintillaNET 2.4: 3/12/2012 Jacob Slusser Added support for annotations. Issues Fixed with this Release Issue # Title 25012 25012 25018 25018 25023 25023 25014 25014 Visual Studio ALM Quick Reference Guidance: v3 - For Visual Studio 11: RELEASE README Welcome to the BETA release of the Quick Reference Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation ...AvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Windows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2.1: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...Extensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.47: Properly output escaped characters in CSS identifiers throw an EOF error when parsing a CSS selector that doesn't end in a declaration block chased down a stack-overflow issue with really large JS sources. Needed to flatten out the AST tree for adjacent expression statements that the application merges into a single expression statement, or that already contain large, comma-separated expressions in the original source. fix issue #17569: tie together the -debug switch with the DEBUG defi...New ProjectsCOBOL Bubble Sort: The famous Bubble Sort algorithm using COBOLCross Site Media Dashboard (webpart) for SharePoint video content: View video content in easy to configure dashboard structure. Supports a vast range of video formatsDataObjects.Net Samples: DataObjects.Net SamplesDev Tracking Tool: Dev Tracking Tool is thought to help software developers keeping track of their activities in a fast way, and use these informations for later update of tasks in other informatic systems (i.e.: tracking tasks in TFS and/or other tracking tools).Governance Checklist - Create/manage your Governance Checklist: Governance Checklist - Create/manage your Governance Checklist. SharePoint Governance Checklist generated as a starting point however you can update to your own criteria. Visual Guages to show the status of your governance progresslibspotify.NET - a managed interop library for libspotify: libspotify.NET is a simple interop wrapper library for libspotify written in C#. It enables .NET developers to write applications that can browse, search, and stream digital music from the Spotify platform. This project is compatible with libspotify API version 10.1.16. Requires libspotify.dll, a Spotify premium account, and an application API key. More info on the libspotify API at http://developer.spotify.com/en/libspotify/overview/ Media.Net: All-In-One Media Player for Windows XP, Vista, Windows 7 and Windows 8.MisTutoriales: MisTutoriales Ejemplos de programación.mobile video: mobile videoMugen MVVM Toolkit: Mugen MVVM Toolkit makes it easier to develop Silverlight, WPF and WP7 applications using the Model-View-ViewModel design pattern. It is very easy to use. It combines the pattern of DI (dependency injection) and MVVM (Model-View-ViewModel).Project SIMPLE Orca: SIMPLE makes it easier for non-programmers to create simple applications. You'll no longer have to learn an entire language in order to create that simple application you've been stressing over. S imple And I deal M acroed P rogramming L anguage For E aseRelational data Transfer Application: Relational data Transfer Application helps to move data scenarios from One relational database to other Relational database without moving entire tables. Basically this applciation moves a given data row along with its relational data to destination database. rGUI: rGUI is an open source .NET front-end for Robocopy written in C#. It is designed for users already familiar with the Robocopy command-line switches and what they do, but who want the command parameters presented in a visual way.S#: Spontaneous Sharp: A mix of very easy to use c# libraries, born out of spontaneous needs to simplify a large number of programming tasks in .NET C#.SDF - Smart Document Framework: Smart Document Framework offers an alternative to the FlowDocument which provides a simpler rendering engine and allows for better pagination.Shatong: Shatong SystemSPD 2007 Custom Activity Pause Until CheckOut = None: This activity can be added to the beginning of a SharePoint Designer 2007 workflow to pause the workflow until the item is no longer checked out (soft or hard checkout)Spontaneous XNA Library (SXL): Yet another XNA Library that has arisen from various spontaneous needs. Hopefully it can be as helpful to others as it has been to me.TeaFiles.Net - time series storage: TeaFiles.Net is an API for TeaFiles that makes it easy to store and exchange time series data between .Net programs and C++, Python, R and other applications. Written in C#. Find more details about the file specification, other APIs and tools at discretelogics.comTypePipe: TypePipe allows you to modify existing CLR types using a simple, expression-based API. Modifications from several tools and libraries (AOP, IoC etc.) can be combined. Types are generated via Reflection.Emit or user-defined back-ends.UCB_12_1: This is a research projectUCB_12_2: UCB_12_2UCB_12_3: UCB_12_3UCB_12_4: UCB_12_4UCB_12_Common: UCB_12_CommonVG Task Manager: task manager demo project created by Vivek Gupta.WP7 Map Control: Lightweight universal map control for Windows Phone 7xRM#: xRM# is focused on boosting productivity while developing JavaScript customizations for Microsoft Dynamics CRM 2011. xRM# provided a platform to scribble code in C# and translating them to JavaScript snippet for xRM customizations. Developers can benefit from structural and coherent flow of using existing C# coding guidelines. Pseudo data types, IntelliSense and Code Documentation reduce code look-ups and increase productivity. xRM# also supports deploying generated scripts as minified ver...

  Read the article

• Wireless card power management

  - by penner

  I have noticed that when my computer in plugged in, the wireless strength increases. I'm assuming this is to do with power management. Is there a way to disable Wireless Power Management? I have found a few blog posts that show hacks to disable this but what is best practice here? Should there not be an option via the power menu that lets you toggle this? EDIT -- FILES AND LOGS AS REQUESTED /var/log/kern.log Jul 11 11:45:27 CoolBreeze kernel: [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532080] [fglrx] Gart USWC size:1280 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532084] [fglrx] Gart cacheable size:508 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Jul 11 11:45:38 CoolBreeze kernel: [ 17.423743] eth1: no IPv6 routers present Jul 11 11:46:37 CoolBreeze kernel: [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) Jul 11 11:46:37 CoolBreeze kernel: [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 Jul 11 11:54:25 CoolBreeze kernel: [ 543.679614] eth1: no IPv6 routers present dmesg [ 1.411959] ACPI: Power Button [PWRB] [ 1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.412054] ACPI: Sleep Button [SLPB] [ 1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.412765] ACPI: Lid Switch [LID0] [ 1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.412874] ACPI: Power Button [PWRF] [ 1.412996] ACPI: Fan [FAN0] (off) [ 1.413068] ACPI: Fan [FAN1] (off) [ 1.419493] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.419498] ACPI: Thermal Zone [TZ00] (27 C) [ 1.421913] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.421918] ACPI: Thermal Zone [TZ01] (61 C) [ 1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.421986] ACPI: Battery Slot [BAT0] (battery present) [ 1.422062] ERST: Table is not found! [ 1.422067] GHES: HEST is not enabled! [ 1.422158] isapnp: Scanning for PnP cards... [ 1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.434620] ACPI: Battery Slot [BAT0] (battery present) [ 1.736355] Freeing initrd memory: 14352k freed [ 1.777846] isapnp: No Plug & Play device found [ 1.963650] Linux agpgart interface v0.103 [ 1.967148] brd: module loaded [ 1.968866] loop: module loaded [ 1.969134] ahci 0000:00:1f.2: version 3.0 [ 1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.969277] ahci: SSS flag set, parallel bus scan disabled [ 1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.969338] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.983340] scsi0 : ahci [ 1.983515] scsi1 : ahci [ 1.983670] scsi2 : ahci [ 1.983829] scsi3 : ahci [ 1.983985] scsi4 : ahci [ 1.984145] scsi5 : ahci [ 1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45 [ 1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45 [ 1.984282] ata3: DUMMY [ 1.984285] ata4: DUMMY [ 1.984288] ata5: DUMMY [ 1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45 [ 1.985150] Fixed MDIO Bus: probed [ 1.985192] tun: Universal TUN/TAP device driver, 1.6 [ 1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.985285] PPP generic driver version 2.4.2 [ 1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985666] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800 [ 2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.002447] hub 1-0:1.0: USB hub found [ 2.002455] hub 1-0:1.0: 3 ports detected [ 2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.002775] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00 [ 2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.022401] hub 2-0:1.0: USB hub found [ 2.022409] hub 2-0:1.0: 3 ports detected [ 2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.022599] uhci_hcd: USB Universal Host Controller Interface driver [ 2.022720] usbcore: registered new interface driver libusual [ 2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.036096] mousedev: PS/2 mouse device common for all mice [ 2.036710] rtc_cmos 00:07: RTC can wake from S4 [ 2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.037503] device-mapper: uevent: version 1.0.3 [ 2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.037725] EISA: Probing bus 0 at eisa.0 [ 2.037729] EISA: Cannot allocate resource for mainboard [ 2.037734] Cannot allocate resource for EISA slot 1 [ 2.037738] Cannot allocate resource for EISA slot 2 [ 2.037741] Cannot allocate resource for EISA slot 3 [ 2.037745] Cannot allocate resource for EISA slot 4 [ 2.037749] Cannot allocate resource for EISA slot 5 [ 2.037753] Cannot allocate resource for EISA slot 6 [ 2.037756] Cannot allocate resource for EISA slot 7 [ 2.037760] Cannot allocate resource for EISA slot 8 [ 2.037764] EISA: Detected 0 cards. [ 2.037782] cpufreq-nforce2: No nForce2 chipset. [ 2.038264] cpuidle: using governor ladder [ 2.039015] cpuidle: using governor menu [ 2.039019] EFI Variables Facility v0.08 2004-May-17 [ 2.040061] TCP cubic registered [ 2.041438] NET: Registered protocol family 10 [ 2.043814] NET: Registered protocol family 17 [ 2.043823] Registering the dns_resolver key type [ 2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.044336] Using IPI No-Shortcut mode [ 2.045620] PM: Hibernation image not present or could not be loaded. [ 2.045644] registered taskstats version 1 [ 2.073070] Magic number: 4:976:796 [ 2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323) [ 2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.076658] EDD information not available. [ 2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100 [ 2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.303143] ata1.00: configured for UDMA/100 [ 2.303453] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5 [ 2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.304213] sd 0:0:0:0: [sda] Write Protect is off [ 2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306818] sda: sda1 sda2 < sda5 > [ 2.308780] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.318162] Refined TSC clocksource calibration: 1595.999 MHz. [ 2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.318178] Switching to clocksource tsc [ 2.450939] hub 1-1:1.0: USB hub found [ 2.451121] hub 1-1:1.0: 6 ports detected [ 2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100 [ 2.636152] ata2.00: applying bridge limits [ 2.649711] ata2.00: configured for UDMA/100 [ 2.653762] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5 [ 2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.694649] hub 2-1:1.0: USB hub found [ 2.694840] hub 2-1:1.0: 8 ports detected [ 2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.981454] ata6: SATA link down (SStatus 0 SControl 300) [ 2.982597] Freeing unused kernel memory: 740k freed [ 2.983523] Write protecting the kernel text: 5816k [ 2.983808] Write protecting the kernel read-only data: 2376k [ 2.983811] NX-protecting the kernel data: 4424k [ 3.014594] udevd[127]: starting version 175 [ 3.068925] sdhci: Secure Digital Host Controller Interface driver [ 3.068932] sdhci: Copyright(c) Pierre Ossman [ 3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64 [ 3.069816] mmc0: no vmmc regulator found [ 3.069877] Registered led device: mmc0:: [ 3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 3.071078] tg3.c:v3.121 (November 2, 2011) [ 3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071269] tg3 0000:0b:00.0: setting latency timer to 64 [ 3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64 [ 3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.078517] EXT4-fs (sda1): write access will be enabled during recovery [ 3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6 [ 3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710 [ 3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071 [ 3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711 [ 3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709 [ 3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708 [ 3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707 [ 3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706 [ 3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705 [ 3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551 [ 3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523 [ 3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520 [ 3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901 [ 3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272 [ 3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266 [ 3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261 [ 3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256 [ 3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255 [ 3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072 [ 3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050 [ 3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064 [ 3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394 [ 3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390 [ 3.390745] EXT4-fs (sda1): 22 orphan inodes deleted [ 3.390748] EXT4-fs (sda1): recovery complete [ 3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400 [ 3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.929965] udevd[400]: starting version 175 [ 3.933581] Adding 6278140k swap on /dev/sda5. Priority:-1 extents:1 across:6278140k SS [ 3.945183] lp: driver loaded but no devices found [ 3.999389] wmi: Mapper loaded [ 4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 4.016702] ite_cir: Using model: ITE8708 CIR transceiver [ 4.016706] ite_cir: TX-capable: 1 [ 4.016710] ite_cir: Sample period (ns): 8680 [ 4.016713] ite_cir: TX carrier frequency (Hz): 38000 [ 4.016716] ite_cir: TX duty cycle (%): 33 [ 4.016719] ite_cir: RX low carrier frequency (Hz): 0 [ 4.016722] ite_cir: RX high carrier frequency (Hz): 0 [ 4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 4.025691] Disabling lock debugging due to kernel taint [ 4.027410] IR NEC protocol handler initialized [ 4.030250] lib80211: common routines for IEEE802.11 drivers [ 4.030257] lib80211_crypt: registered algorithm 'NULL' [ 4.036024] IR RC5(x) protocol handler initialized [ 4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 4.039006] acpi device:03: registered as cooling_device10 [ 4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 4.039261] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.050215] wl 0000:05:00.0: setting latency timer to 64 [ 4.052252] Registered IR keymap rc-rc6-mce [ 4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6 [ 4.054614] IR RC6 protocol handler initialized [ 4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 4.054839] ite_cir: driver has been successfully loaded [ 4.057338] IR JVC protocol handler initialized [ 4.061553] IR Sony protocol handler initialized [ 4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7 [ 4.066724] IR MCE Keyboard/mouse protocol handler initialized [ 4.072580] lirc_dev: IR Remote Control driver registered, major 250 [ 4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 4.073286] IR LIRC bridge handler initialized [ 4.077849] Linux video capture interface: v2.00 [ 4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f) [ 4.085492] EDAC MC: Ver: 2.1.0 [ 4.087138] lib80211_crypt: registered algorithm 'TKIP' [ 4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X [ 4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 [ 4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 4.122096] usbcore: registered new interface driver uvcvideo [ 4.122100] USB Video Class driver (1.1.1) [ 4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes. [ 4.129678] [fglrx] vendor: 1002 device: 68c0 count: 1 [ 4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100 [ 4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.132024] pci 0000:02:00.0: setting latency timer to 64 [ 4.133712] [fglrx] Kernel PAT support is enabled [ 4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.184133] device-mapper: multipath: version 1.3.0 loaded [ 4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 4.292402] Bluetooth: Core ver 2.16 [ 4.292449] NET: Registered protocol family 31 [ 4.292454] Bluetooth: HCI device and connection manager initialized [ 4.292459] Bluetooth: HCI socket layer initialized [ 4.292463] Bluetooth: L2CAP socket layer initialized [ 4.292473] Bluetooth: SCO socket layer initialized [ 4.296333] Bluetooth: RFCOMM TTY layer initialized [ 4.296342] Bluetooth: RFCOMM socket layer initialized [ 4.296345] Bluetooth: RFCOMM ver 1.11 [ 4.313586] ppdev: user-space parallel port driver [ 4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.316625] Bluetooth: BNEP filters: protocol multicast [ 4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser" [ 4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser" [ 4.425757] init: failsafe main process (898) killed by TERM signal [ 4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser" [ 4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser" [ 4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 4.510065] vesafb: scrolling: redraw [ 4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.510084] mtrr: no more MTRRs available [ 4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k [ 4.515203] Console: switching to colour frame buffer device 144x54 [ 4.515278] fb0: VESA VGA frame buffer device [ 4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X [ 4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.519573] [fglrx] ATIF platform detected with notification ID: 0x81 [ 6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.393137] [fglrx] Firegl kernel thread PID: 1305 [ 6.393306] [fglrx] Firegl kernel thread PID: 1306 [ 6.393472] [fglrx] Firegl kernel thread PID: 1307 [ 6.393726] [fglrx] IRQ 49 Enabled [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. [ 6.532080] [fglrx] Gart USWC size:1280 M. [ 6.532084] [fglrx] Gart cacheable size:508 M. [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.423743] eth1: no IPv6 routers present [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 [ 543.679614] eth1: no IPv6 routers present lsmod Module Size Used by kvm_intel 127560 0 kvm 359456 1 kvm_intel joydev 17393 0 vesafb 13516 1 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 rfcomm 38139 0 bluetooth 158438 10 bnep,rfcomm dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi binfmt_misc 17292 1 dell_laptop 17767 0 dcdbas 14098 1 dell_laptop dm_multipath 22710 0 fglrx 2909855 143 snd_hda_codec_hdmi 31775 1 psmouse 72919 0 serio_raw 13027 0 i7core_edac 23382 0 lib80211_crypt_tkip 17275 0 edac_core 46858 1 i7core_edac uvcvideo 67203 0 snd_hda_codec_idt 60251 1 videodev 86588 1 uvcvideo ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec ir_mce_kbd_decoder 12681 0 snd_seq_midi 13132 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 snd_rawmidi 25424 1 snd_seq_midi ir_rc6_decoder 12459 0 wl 2646601 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_rc5_decoder 12459 0 video 19068 0 snd_hda_intel 32765 5 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel rc_rc6_mce 12454 0 lib80211 14040 2 lib80211_crypt_tkip,wl snd_hwdep 13276 1 snd_hda_codec ir_nec_decoder 12459 0 snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ite_cir 24743 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir snd_timer 28931 2 snd_seq,snd_pcm wmi 18744 1 dell_wmi snd 62064 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm coretemp 13269 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141369 0 firewire_ohci 40172 0 sdhci_pci 18324 0 firewire_core 56906 1 firewire_ohci sdhci 28241 1 sdhci_pci crc_itu_t 12627 1 firewire_core lshw *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:a9:54:31 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0900000-f0903fff *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 logical name: eth0 version: 10 serial: b8:ac:6f:71:02:a6 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:48 memory:f0d00000-f0d0ffff

  Read the article

• Building a SOA/BPM/BAM Cluster Part I &ndash; Preparing the Environment

  - by antony.reynolds

  An increasing number of customers are using SOA Suite in a cluster configuration, I might hazard to say that the majority of production deployments are now using SOA clusters.  So I thought it may be useful to detail the steps in building an 11g cluster and explain a little about why things are done the way they are. In this series of posts I will explain how to build a SOA/BPM cluster using the Enterprise Deployment Guide. This post will explain the setting required to prepare the cluster for installation and configuration. Software Required The following software is required for an 11.1.1.3 SOA/BPM install. Software Version Notes Oracle Database Certified databases are listed here SOA & BPM Suites require a working database installation. Repository Creation Utility (RCU) 11.1.1.3 If upgrading an 11.1.1.2 repository then a separate script is available. Web Tier Utilities 11.1.1.3 Provides Web Server, 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. Web Tier Utilities 11.1.1.3 Web Server, 11.1.1.3 Patch.  You can use the 11.1.1.2 version without problems. Oracle WebLogic Server 11gR1 10.3.3 This is the host platform for 11.1.1.3 SOA/BPM Suites. SOA Suite 11.1.1.2 SOA Suite 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. SOA Suite 11.1.1.3 SOA Suite 11.1.1.3 patch, requires 11.1.12 to have been installed. My installation was performed on Oracle Enterprise Linux 5.4 64-bit. Database I will not cover setting up the database in this series other than to identify the database requirements.  If setting up a SOA cluster then ideally we would also be using a RAC database.  I assume that this is running on separate machines to the SOA cluster.  Section 2.1, “Database”, of the EDG covers the database configuration in detail. Settings The database should have processes set to at least 400 if running SOA/BPM and BAM. alter system set processes=400 scope=spfile Run RCU The Repository Creation Utility creates the necessary database tables for the SOA Suite.  The RCU can be run from any machine that can access the target database.  In 11g the RCU creates a number of pre-defined users and schema with a user defiend prefix.  This allows you to have multiple 11g installations in the same database. After running the RCU you need to grant some additional privileges to the soainfra user.  The soainfra user should have privileges on the transaction tables. grant select on sys.dba_pending_transactions to prefix_soainfra Grant force any transaction to prefix_soainfra Machines The cluster will be built on the following machines. EDG Name is the name used for this machine in the EDG. Notes are a description of the purpose of the machine. EDG Name Notes LB External load balancer to distribute load across and failover between web servers. WEBHOST1 Hosts a web server. WEBHOST2 Hosts a web server. SOAHOST1 Hosts SOA components. SOAHOST2 Hosts SOA components. BAMHOST1 Hosts BAM components. BAMHOST2 Hosts BAM components. Note that it is possible to collapse the BAM servers so that they run on the same machines as the SOA servers. In this case BAMHOST1 and SOAHOST1 would be the same, as would BAMHOST2 and SOAHOST2. The cluster may include more than 2 servers and in this case we add SOAHOST3, SOAHOST4 etc as needed. My cluster has WEBHOST1, SOAHOST1 and BAMHOST1 all running on a single machine. Software Components The cluster will use the following software components. EDG Name is the name used for this machine in the EDG. Type is the type of component, generally a WebLogic component. Notes are a description of the purpose of the component. EDG Name Type Notes AdminServer Admin Server Domain Admin Server WLS_WSM1 Managed Server Web Services Manager Policy Manager Server WLS_WSM2 Managed Server Web Services Manager Policy Manager Server WLS_SOA1 Managed Server SOA/BPM Managed Server WLS_SOA2 Managed Server SOA/BPM Managed Server WLS_BAM1 Managed Server BAM Managed Server running Active Data Cache WLS_BAM2 Managed Server BAM Manager Server without Active Data Cache   Node Manager Will run on all hosts with WLS servers OHS1 Web Server Oracle HTTP Server OHS2 Web Server Oracle HTTP Server LB Load Balancer Load Balancer, not part of SOA Suite The above assumes a 2 node cluster. Network Configuration The SOA cluster requires an extensive amount of network configuration.  I would recommend assigning a private sub-net (internal IP addresses such as 10.x.x.x, 192.168.x.x or 172.168.x.x) to the cluster for use by addresses that only need to be accessible to the Load Balancer or other cluster members.  Section 2.2, "Network", of the EDG covers the network configuration in detail. EDG Name is the hostname used in the EDG. IP Name is the IP address name used in the EDG. Type is the type of IP address: Fixed is fixed to a single machine. Floating is assigned to one of several machines to allow for server migration. Virtual is assigned to a load balancer and used to distribute load across several machines. Host is the host where this IP address is active.  Note for floating IP addresses a range of hosts is given. Bound By identifies which software component will use this IP address. Scope shows where this IP address needs to be resolved. Cluster scope addresses only have to be resolvable by machines in the cluster, i.e. the machines listed in the previous section.  These addresses are only used for inter-cluster communication or for access by the load balancer. Internal scope addresses Notes are comments on why that type of IP is used. EDG Name IP Name Type Host Bound By Scope Notes ADMINVHN VIP1 Floating SOAHOST1-SOAHOSTn AdminServer Cluster Admin server, must be able to migrate between SOA server machines. SOAHOST1 IP1 Fixed SOAHOST1 NodeManager, WLS_WSM1 Cluster WSM Server 1 does not require server migration. SOAHOST2 IP2 Fixed SOAHOST1 NodeManager, WLS_WSM2 Cluster WSM Server 2 does not require server migration SOAHOST1VHN VIP2 Floating SOAHOST1-SOAHOSTn WLS_SOA1 Cluster SOA server 1, must be able to migrate between SOA server machines SOAHOST2VHN VIP3 Floating SOAHOST1-SOAHOSTn WLS_SOA2 Cluster SOA server 2, must be able to migrate between SOA server machines BAMHOST1 IP4 Fixed BAMHOST1 NodeManager Cluster   BAMHOST1VHN VIP4 Floating BAMHOST1-BAMHOSTn WLS_BAM1 Cluster BAM server 1, must be able to migrate between BAM server machines BAMHOST2 IP3 Fixed BAMHOST2 NodeManager, WLS_BAM2 Cluster BAM server 2 does not require server migration WEBHOST1 IP5 Fixed WEBHOST1 OHS1 Cluster   WEBHOST2 IP6 Fixed WEBHOST2 OHS2 Cluster   soa.mycompany.com VIP5 Virtual LB LB Public External access point to SOA cluster. admin.mycompany.com VIP6 Virtual LB LB Internal Internal access to WLS console and EM soainternal.mycompany.com VIP7 Virtual LB LB Internal Internal access point to SOA cluster Floating IP addresses are IP addresses that may be re-assigned between machines in the cluster.  For example in the event of failure of SOAHOST1 then WLS_SOA1 will need to be migrated to another server.  In this case VIP2 (SOAHOST1VHN) will need to be activated on the new target machine.  Once set up the node manager will manage registration and removal of the floating IP addresses with the exception of the AdminServer floating IP address. Note that if the BAMHOSTs and SOAHOSTs are the same machine then you can obviously share the hostname and fixed IP addresses, but you still need separate floating IP addresses for the different managed servers.  The hostnames don’t have to be the ones given in the EDG, but they must be distinct in the same way as the ETC names are distinct.  If the type is a fixed IP then if the addresses are the same you can use the same hostname, for example if you collapse the soahost1, bamhost1 and webhost1 onto a single machine then you could refer to them all as HOST1 and give them the same IP address, however SOAHOST1VHN can never be the same as BAMHOST1VHN because these are floating IP addresses. Notes on DNS IP addresses that are of scope “Cluster” just need to be in the hosts file (/etc/hosts on Linux, C:\Windows\System32\drivers\etc\hosts on Windows) of all the machines in the cluster and the load balancer.  IP addresses that are of scope “Internal” need to be available on the internal DNS servers, whilst IP addresses of scope “Public” need to be available on external and internal DNS servers. Shared File System At a minimum the cluster needs shared storage for the domain configuration, XA transaction logs and JMS file stores.  It is also possible to place the software itself on a shared server.  I strongly recommend that all machines have the same file structure for their SOA installation otherwise you will experience pain!  Section 2.3, "Shared Storage and Recommended Directory Structure", of the EDG covers the shared storage recommendations in detail. The following shorthand is used for locations: ORACLE_BASE is the root of the file system used for software and configuration files. MW_HOME is the location used by the installed SOA/BPM Suite installation.  This is also used by the web server installation.  In my installation it is set to <ORACLE_BASE>/SOA11gPS2. ORACLE_HOME is the location of the Oracle SOA components or the Oracle Web components.  This directory is installed under the the MW_HOME but the name is decided by the user at installation, default values are Oracle_SOA1 and Oracle_Web1.  In my installation they are set to <MW_HOME>/Oracle_SOA and <MW_HOME>/Oracle _WEB. ORACLE_COMMON_HOME is the location of the common components and is located under the MW_HOME directory.  This is always <MW_HOME>/oracle_common. ORACLE_INSTANCE is used by the Oracle HTTP Server and/or Oracle Web Cache.  It is recommended to create it under <ORACLE_BASE>/admin.  In my installation they are set to <ORACLE_BASE>/admin/Web1, <ORACLE_BASE>/admin/Web2 and <ORACLE_BASE>/admin/WC1. WL_HOME is the WebLogic server home and is always found at <MW_HOME>/wlserver_10.3. Key file locations are shown below. Directory Notes <ORACLE_BASE>/admin/domain_name/aserver/domain_name Shared location for domain.  Used to allow admin server to manually fail over between machines.  When creating domain_name provide the aserver directory as the location for the domain. In my install this is <ORACLE_BASE>/admin/aserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/aserver/applications Shared location for deployed applications.  Needs to be provided when creating the domain. In my install this is <ORACLE_BASE>/admin/aserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/domain_name Either unique location for each machine or can be shared between machines to simplify task of packing and unpacking domain.  This acts as the managed server configuration location.  Keeping it separate from Admin server helps to avoid problems with the managed servers messing up the Admin Server. In my install this is <ORACLE_BASE>/admin/mserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/applications Either unique location for each machine or can be shared between machines.  Holds deployed applications. In my install this is <ORACLE_BASE>/admin/mserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/soa_cluster_name Shared directory to hold the following   dd – deployment descriptors   jms – shared JMS file stores   fadapter – shared file adapter co-ordination files   tlogs – shared transaction log files In my install this is <ORACLE_BASE>/admin/soa_cluster. <ORACLE_BASE>/admin/instance_name Local folder for web server (OHS) instance. In my install this is <ORACLE_BASE>/admin/web1 and <ORACLE_BASE>/admin/web2. I also have <ORACLE_BASE>/admin/wc1 for the Web Cache I use as a load balancer. <ORACLE_BASE>/product/fmw This can be a shared or local folder for the SOA/BPM Suite software.  I used a shared location so I only ran the installer once. In my install this is <ORACLE_BASE>/SOA11gPS2 All the shared files need to be put onto a shared storage media.  I am using NFS, but recommendation for production would be a SAN, with mirrored disks for resilience. Collapsing Environments To reduce the hardware requirements it is possible to collapse the BAMHOST, SOAHOST and WEBHOST machines onto a single physical machine.  This will require more memory but memory is a lot cheaper than additional machines.  For environments that require higher security then stay with a separate WEBHOST tier as per the EDG.  Similarly for high volume environments then keep a separate set of machines for BAM and/or Web tier as per the EDG. Notes on Dev Environments In a dev environment it is acceptable to use a a single node (non-RAC) database, but be aware that the config of the data sources is different (no need to use multi-data source in WLS).  Typically in a dev environment we will collapse the BAMHOST, SOAHOST and WEBHOST onto a single machine and use a software load balancer.  To test a cluster properly we will need at least 2 machines. For my test environment I used Oracle Web Cache as a load balancer.  I ran it on one of the SOA Suite machines and it load balanced across the Web Servers on both machines.  This was easy for me to set up and I could administer it from a web based console.

  Read the article

• CodePlex Daily Summary for Sunday, March 13, 2011

  CodePlex Daily Summary for Sunday, March 13, 2011Popular ReleasesImage.Viewer: 2011.2: Whats new for Image.Viewer 2011.2: New open from file New about dialog Minor Bug Fix's, improvements and speed upsIronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...Composite C1 CMS: Composite C1 2.1 (2.1.4087.22991): Composite C1 is a fully featured pro open source CMS for quick/custom website creation. Modern architecture, very user friendly. Use wizards or HTML/CSS/XSLT/ASP.NET/LINQ/.NET4ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??，????。??????????All-In-One Code Framework ???，??20?Sample！！????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??： CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??： FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Release of the WPF version, most of the general issues have been resolved. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. Whe...PHP Manager for IIS: PHP Manager 1.1.2 for IIS 7: This is a localization release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus a few bug fixes (see change list for more details). Most importantly this release is translated into five languages: German - the translation is provided by Christian Graefe Dutch - the translation is provided by Harrie Verveer Turkish - the translation is provided by Yusuf Oztürk Japanese - the translation is provided by Kenichi Wakasa Russian - the translation is provid...TweetSharp: TweetSharp v2.0.0: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Beta ChangesAdded user streams support Serialization is not attempted for Twitter 5xx errors Fixes based on feedback Third Party Library VersionsHammock v1.2.0: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comDirectQ: Release 1.8.7 (RC2): More fixes and improvements. Note for multiplayer - you may need to set r_waterwarp to 0 or 2 before connecting to a server, otherwise you will get a "Mod_PointInLeaf: bad model" error and not be able to connect. You can set it back to 1 after you connect, of course. This only came to light after releasing, and will be fixed in the next one.Microsoft All-In-One Code Framework - a centralized code sample library: Visual Studio 2008 Code Samples 2011-03-09: Code samples for Visual Studio 2008Office Web.UI: Version 2.4: After having lost all modifications done for 2.3. I finally did it again... Have a look at http://www.officewebui.com/change-log Also, the documentation continues to grow... http://www.officewebui.com/category/kb ThanksmyCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...patterns & practices : Composite Services: Composite Services Guidance - CTP2: Overview The Composite Services guidance (codename Reykjavik) provides best practices and capabilities for applying industry-known SOA design patterns when building robust, connected, service-oriented composite enterprise applications. These capabilities are implemented as a set of reusable components for analytic tracing, service virtualization, metadata centralization and versioning, and policy centralization as well as exception management, included in this release. Changes in this CTP ...Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...DotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 2: What is new in DotNetAge 2.0 ? Completely update DJME to DJME2, enhance user experience ,more beautiful and more interactively visit DJME project home to lean more about DJME http://www.dotnetage.com/sites/home/djme.html A new widget engine has came! Faster and easiler. Runtime performance enhanced. SEO enhanced. UI Designer enhanced. A new web resources explorer. Page manager enhanced. BlogML supports added that allows you import/export your blog data to/from dotnetage publishi...Kooboo CMS: Kooboo CMS 3.0 Beta: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB and MongoDB. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder t...LINQ to Twitter: LINQ to Twitter Beta v2.0.20: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation.New ProjectsAxvius.Testing.NUnit: Provides fluent assertion methods for NUnit.Azure Conversion plugin for VS 2010: Azure Conversion Wizard is a plugin for VS 2010. The wizard converts your AZP.NET solutions for .NET 3.5 and higher to Windows Azure Platform. BlogSpam.net API: A simple C#.NET wrapper for the BlogSpam.net comment spam service.Bonyad Project Managing System: This is for managing bonyad projects.Camp Araminta: This project will be used to coordinate development efforts on the Camp Araminta website.code: This is demo summary ! Education Fellows Meta Service: Rebranded LaEMWS.Family Guide: This project is currently just for learning purposes. But it shall evolve to a fully functional solution later.HL7.NET: HL7.net groups all the neccessary code for managing HL7 standard. It makes it easy to add HL7 interoperability to your application. It is developed in C#.NETHyper-V Monitor Gadget: Hyper-V Monitor Gadget for Windows Sidebar that lists Hyper-V servers and their VM's. Supports status information and controlling them directly from the gadget.jp110311: Azure 312 ??????????? Azure ????????????????????????????????????????。Lugene: Index generation and distribution framework based on Lucene.net and index schemas provided by Lumen. Includes support for incremental updates of indexes, and a plugin framework for custom index providers.Planet Me: ...poc Dev: this is pco projectProcon 2: Procon Frostbite, rebuilt from the ground up.RandomNumbersGames: Small random numbers game which very helpful for people who want to develop their focusSistema Creeo: Sistema de Gestão de clínicasSPDiscussionBoard: SPDiscussionBoard started on 2005 while developing an ASP.NET forum and taking into consideration that I may use it on SharePoint in a day. Yesterday I remembered that, and started to alter it to run as a webpart inside SharePoint 2010, and it took about 4 hours to work.Video Commander: VideoCommander is an external control interface for vlc player. It enables the user to create play lists with start- and stop time and to play videos on a specified display. VideoCommander was especially developed for presenting videos on events like church services or theater.Windows Live Writer - Insert Tag Snippet Plugin: Insert Tag Snippet plugin is used to select a snippet from a collection of "user" defined snippets and insert it to the post. Prefix and suffix tags can also be defined. Especially useful for <code> and <pre> kind of tags. With Insert Tag Snippet plugin, you don't need to switch back to HTML view and than back to normal view again. The code is open for all communities' members to see how to develop a plugin for Windows Live Writer using C#.WMI Connection for ADO.NET: A lot of application have excellent support for ADO.NET connections. But many of them weren't desigend to work with WMI (Windows Management Instrumentation). This project puts them together, and adds the capability to access WMI data through the IDBConnection interface.Zugger: Zugger is an assistant application for those people who are using Zentao PMS. It provides the functions: 1. Your the counts of your bugs and tasks. 2. The lists of bugs and tasks. 3. Quick edit for bugs and tasks. 4. Notification of new bugs and tasks. It is developed in C# WPF

  Read the article

• CodePlex Daily Summary for Monday, March 14, 2011

  CodePlex Daily Summary for Monday, March 14, 2011Popular ReleasesProDinner - ASP.NET MVC EF4 Code First DDD jQuery Sample App: first release: ProDinner is an ASP.NET MVC sample application, it uses DDD, EF4 Code First for Data Access, jQuery and MvcProjectAwesome for Web UI, it has Multi-language User Interface Features: CRUD and search operations for entities Multi-Language User Interface upload and crop Images (make thumbnail) for meals pagination using "more results" button very rich and responsive UI (using Mvc Project Awesome) Multiple UI themes (using jQuery UI themes)Personal Activity Monitor - increas your productivity by eliminating timewasters: Personal Activity Monitor v0.1.2: removed PreEmptive monitoring attributes - maybe will be back in the future added scrollbars to the list of apps :)BEPUphysics: BEPUphysics v0.15.0: BEPUphysics v0.15.0!LiveChat Starter Kit: LCSK v1.1: This release contains couple of new features and bug fixes including: Features: Send chat transcript via email Operator can now invite visitor to chat (pro-active chat request) Bug Fixes: Operator management (Save and Delete) bug fixes Operator Console chat small fixesIronRuby: 1.1.3: IronRuby 1.1.3 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. The main purpose of this release is to sync with IronPython 2.7 release, i.e. to keep the Dynamic Language Runtime that both these languages build on top shareable. This release also fixes a few bugs: 5763 Use...SQL Server PowerShell Extensions: 2.3.2.1 Production: Release 2.3.2.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 13 modules with 163 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler, Oracle and MySQL and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.Image.Viewer: 2011.2: Whats new for Image.Viewer 2011.2: New open from file New about dialog Minor Bug Fix's, improvements and speed upsIronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??，????。??????????All-In-One Code Framework ???，??20?Sample！！????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??： CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??： FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Release of the WPF version, most of the general issues have been resolved. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. Whe...PHP Manager for IIS: PHP Manager 1.1.2 for IIS 7: This is a localization release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus a few bug fixes (see change list for more details). Most importantly this release is translated into five languages: German - the translation is provided by Christian Graefe Dutch - the translation is provided by Harrie Verveer Turkish - the translation is provided by Yusuf Oztürk Japanese - the translation is provided by Kenichi Wakasa Russian - the translation is provid...TweetSharp: TweetSharp v2.0.0: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Beta ChangesAdded user streams support Serialization is not attempted for Twitter 5xx errors Fixes based on feedback Third Party Library VersionsHammock v1.2.0: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comOffice Web.UI: Version 2.4: After having lost all modifications done for 2.3. I finally did it again... Have a look at http://www.officewebui.com/change-log Also, the documentation continues to grow... http://www.officewebui.com/category/kb ThanksmyCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...patterns & practices : Composite Services: Composite Services Guidance - CTP2: Overview The Composite Services guidance (codename Reykjavik) provides best practices and capabilities for applying industry-known SOA design patterns when building robust, connected, service-oriented composite enterprise applications. These capabilities are implemented as a set of reusable components for analytic tracing, service virtualization, metadata centralization and versioning, and policy centralization as well as exception management, included in this release. Changes in this CTP ...Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...New ProjectsASPRazorWebGrid: ASPRazorWebGrid can be used as an alternative for the built-in WebGrid in ASP.NET MVC3 using Razor. Features: - Server-side sorting and paging - Choice between url grid sort/paging parameters or page postback - Clean pager layoutBert Automation Framework: Bert Automation Framework. Bert can be leveraged to create automated tests for Windows or Web based applications. Framework is developed in C# using Visual Studio 2010, Microsofts AutomationUI and/or WATIN and be used to create automated tests. CasinoBot - A C# IRC gambling bot: CasinoBot is an IRC bot which allows you to play eight games. You can play single- and multiplayer games like hangman or slot. Includes a currency system, multi-channel support and a huge wordlist. The bot is written in C# using the SmartIRC4Net library.Cheque Management: This is a Cheque management project that help people to manage their cheque.CityLife: CityLife is a silverlight gameEmpty Razor Generator: A stripped down single file generator powered by Razor. Similiar to other generators available with the exception that is an absolute minimal implmentation. It's easy to tweak and very flexible. Driven in part because I would love to see it on WPF/WP7/Silverlight.ExtendedWorkFlow: Umbraco Extended WorkFlow to add extra functionality to create workflow process maps that can execute assemblies via commands and that have set stages. All stages, action and commands are logged within the umbraco audit trail. States and Action are also locked to user or role.Fluent CodeDOM: A library which allows you to work with CodeDOM in a way that is similar to the way you write your code. The library allows you to write your generated code much faster and make it more readable. Also, the usage of this library is very intuitive.FT: wftGoogle Map control for ASP.NET MVC: The control wraps Google maps API simplifying the use of Google maps in ASP.NET MVC applications. Based on Telerik Extensions for ASP.NET MVC this control shows how easy is to extend the Telerik framawork by building your own controls for ASP.NET MVC.GooNews - A WP7 Application: A Windows Phone 7 application. iTimeTrack IssueTracker: The iTimeTrack IssueTracker project is a (the AGPL open-source) subset of of the iTimeTrack time and issue tracker app that you can customize for your organizations use.jcompare: jcomparejuwenxue: submit some free bookKinect Finger Paint: Kinect Finger Paint is a Kinect application build on the OpenNI framework. It is meant as a tutorial and playground for experimenting with the Kinect interface.MTA_XNA_11_B: hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hh hProgrammingPractice: VC++ Programming PracticeSimple Backlog for Visual Studio: An enhanced task list for VS 2010, designed to make it easier to manage a backlog of features. Written in C# and WPF. Released under the Apache 2.0 licence.Text Reader: Text reader allows you to enter a text and it will read it up for you using TTS in windows. It's developed in C#.TrainTraX: TrainTraX is a system for training and certifying users with simple multiple choice question tests.Windows Charting: A windows charting application that uses microsoft charting controls for visual studio 2008WPFReveil: WPFReveil is a digital clock control on WPF. This project is composed two elements. WPFReveil.App is the application. WPFReveil contains the control clock.

  Read the article

• Understanding the value of Customer Experience & Loyalty for the Telecommunications Industry

  - by raul.goycoolea

  Worried by economic woes and market forces, especially in mature markets, communications service providers (CSPs) increasingly focus on improving customer experience. In fact, it seems difficult to find a major message by a C-level executive in the developed world that does not include something on "meeting and exceeding customers' needs". Frequently in customer satisfaction studies by prominent firms, CSPs fall short of the leadership demonstrated by other industries that take customer-centric approaches to their bottom-line strategies. Consider the following:Despite the continued impact of global economic crisis, in July 2010, Apple Computer posted record revenue and net quarterly profit. Those who attribute the results primarily to the iPhone 4 launch should note that Apple also shipped around 30% more Macintosh computers than the same period the previous year. Even sales of the iPod line increased by 8% in a highly commoditized, shrinking media player market. Finally, Apple began selling iPads during the quarter, with total sales of more than 3 million units. What does Apple have that the others lack? Well, some great products (and services) to be sure, but it also excels at customer service and support, marketing, and distribution, and has one of the strongest brands globally. Its products are useful, simple to use, easy to acquire and augment, high quality, and considered very cool. They also evoke such an emotional response from many of Apple's customers, which they turn up their noses at competitive products.In other words, Apple appears to have mastered virtually every aspect of customer experience and the resultant loyalty of its customer base - even in difficult financial times. Through that unwavering customer focus, Apple continues to drive its revenues and profits to new heights. Other customer loyalty leaders like Wal-Mart, Google, Toyota and Honda are also doing well by focusing on customer experience as an essential driver of profitability. Service providers should note this performance and ask themselves how they might leverage the same principles to increase their own profitability. After all, that is what customer experience and loyalty are all about: profitability.To successfully manage all the critical touch points of customer experience, CSPs must shun the one-size-fits-all approach. They can no longer afford to view customer service fundamentally as an act of altruism - which mentality dates back to the industry's civil service days, when CSPs were typically government organizations that were critical to economic development and public safety.As regulators and public officials have pushed, and continue to push, service providers to new heights of reliability - using incentives and punishments - most CSPs already have some of the fundamental building blocks of customer service in place. Yet despite that history and experience, service providers still lag other industries in providing what is seen as good customer service.As we observed in the TMF's 2009 Insights Research report, Customer Experience Management: Driving Loyalty & Profitability there has been resurgence in interest by CSPs. More and more of them have stated ambitions to catch up other industries, and they are realizing that good customer service is a powerful strategy for increasing business performance and profitability, not an act of good will.CSPs are recognizing the connection between customer experience and profitability, as demonstrated in many studies. For example, according to research by Bain & Company, a 5 percent improvement in customer retention rates can yield as much as a 75 percent increase in profits for companies across a range of industries.After decades of customer experience strategy formulation, Bain partner and business author, Frederick Reichheld, considers "would you recommend us to a friend?" as the ultimate question for a customer. How many times have you or your friends recommended an iPod, iPhone or a Mac? What do your children recommend to their peers? Their peers to them?There are certain steps service providers have to take to create more personalized relationships with their customers, as well as reduce churn and increase profitability, all while becoming leaner and more agile. First, they have to define customer experience, we define it as the result of the sum of observations, perceptions, thoughts and feelings arising from interactions and relationships between customers and their service provider(s). Virtually every customer touch point - whether directly or indirectly linked to service providers and their partners - contributes to customer perception, satisfaction, loyalty, and ultimately profitability. Gaining leadership in customer experience and satisfaction will not be a simple task, as it is affected by virtually every customer-facing aspect of the service provider, and in turn impacts the service provider deeply - especially on the all-important bottom line. The scope of issues affecting customer experience is complex and dynamic.With new services, devices and applications extending the basis of customer experience to domains beyond the direct control of the service provider, it is likely to increase in complexity and dynamism.Customer loyalty = increased profitsAs stated earlier, customer experience programs are not fundamentally altruistic exercises, but a strategic means of improving competitiveness and profitability in the short and long term. Loyalty is essential to deriving long term profits from customers.Some of the earliest loyalty programs date back to the 1930s, when packaged goods companies offered embedded coupons for rewards to buyers, and eventually retail chains began offering reward programs to frequent shoppers. These programs continued for decades but were leapfrogged in the 1980s by more aggressive programs from the airlines.This movement was led by American Airlines, which launched the first full-scale loyalty marketing program of the modern era with the AAdvantage frequent flyer scheme. It was the first to reward frequent fliers with notional air miles that could be accumulated and later redeemed for free travel. Figure 1: Opportunities example of Customer loyalty driven profitOther airlines and travel providers were quick to grasp the incredible value of providing customers with an incentive to use their company exclusively. Within a few years, dozens of travel industry companies launched similar initiatives and now loyalty programs are achieving near-ubiquity in many service industries, especially those in which it is difficult to differentiate offerings by product attributes.The belief is that increased profitability will result from customer retention efforts because:•    The cost of acquisition occurs only at the beginning of a relationship: the longer the relationship, the lower the amortized cost;•    Account maintenance costs decline as a percentage of total costs, or as a percentage of revenue, over the lifetime of the relationship;•    Long term customers tend to be less inclined to switch and less price sensitive which can result in stable unit sales volume and increases in dollar-sales volume;•    Long term customers may initiate word-of-mouth promotions and referrals, which cost the company nothing and arguably are the most effective form of advertising;•    Long-term customers are more likely to buy ancillary products and higher margin supplemental products;•    Long term customers tend to be satisfied with their relationship with the company and are less likely to switch to competitors, making market entry or competitors gaining market share difficult;•    Regular customers tend to be less expensive to service, as they are familiar with the processes involved, require less 'education', and are consistent in their order placement;•    Increased customer retention and loyalty makes the employees' jobs easier and more satisfying. In turn, happy employees feed back into higher customer satisfaction in a virtuous circle. Figure 2: The virtuous circle of customer loyaltyFigure 2 represents a high-level example of a virtuous cycle driven by customer satisfaction and loyalty, depicting how superiority in product and service offerings, as well as strong customer support by competent employees, lead to higher sales and ultimately profitability. As stated above, this is not a new concept, but succeeding with it is difficult. It has eluded many a company driven to achieve profitability goals. Of course, for this circle to be virtuous, the customer relationship(s) must be profitable.Trying to maintain the loyalty of unprofitable customers is not a viable business strategy. It is, therefore, important that marketers can assess the profitability of each customer (or customer segment), and either improve or terminate relationships that are not profitable. This means each customer's 'relationship costs' must be understood and compared to their 'relationship revenue'. Customer lifetime value (CLV) is the most commonly used metric here, as it is generally accepted as a representation of exactly how much each customer is worth in monetary terms, and therefore a determinant of exactly how much a service provider should be willing to spend to acquire or retain that customer.CLV models make several simplifying assumptions and often involve the following inputs:•    Churn rate represents the percentage of customers who end their relationship with a company in a given period;•    Retention rate is calculated by subtracting the churn rate percentage from 100;•    Period/horizon equates to the units of time into which a customer relationship can be divided for analysis. A year is the most commonly used period for this purpose. Customer lifetime value is a multi-period calculation, often projecting three to seven years into the future. In practice, analysis beyond this point is viewed as too speculative to be reliable. The model horizon is the number of periods used in the calculation;•    Periodic revenue is the amount of revenue collected from a customer in a given period (though this is often extended across multiple periods into the future to understand lifetime value), such as usage revenue, revenues anticipated from cross and upselling, and often some weighting for referrals by a loyal customer to others; •    Retention cost describes the amount of money the service provider must spend, in a given period, to retain an existing customer. Again, this is often forecast across multiple periods. Retention costs include customer support, billing, promotional incentives and so on;•    Discount rate means the cost of capital used to discount future revenue from a customer. Discounting is an advanced method used in more sophisticated CLV calculations;•    Profit margin is the projected profit as a percentage of revenue for the period. This may be reflected as a percentage of gross or net profit. Again, this is generally projected across the model horizon to understand lifetime value.A strong focus on managing these inputs can help service providers realize stronger customer relationships and profits, but there are some obstacles to overcome in achieving accurate calculations of CLV, such as the complexity of allocating costs across the customer base. There are many costs that serve all customers which must be properly allocated across the base, and often a simple proportional allocation across the whole base or a segment may not accurately reflect the true cost of serving that customer;  This is made worse by the fragmentation of customer information, which is likely to be across a variety of product or operations groups, and may be difficult to aggregate due to different representations.In addition, there is the complexity of account relationships and structures to take into consideration. Complex account structures may not be understood or properly represented. For example, a profitable customer may have a separate account for a second home or another family member, which may appear to be unprofitable. If the service provider cannot relate the two accounts, CLV is not properly represented and any resultant cancellation of the apparently unprofitable account may result in the customer churning from the profitable one.In summary, if service providers are to realize strong customer relationships and their attendant profits, there must be a very strong focus on data management. This needs to be coupled with analytics that help business managers and those who work in customer-facing functions offer highly personalized solutions to customers, while maintaining profitability for the service provider. It's clear that acquiring new customers is expensive. Advertising costs, campaign management expenses, promotional service pricing and discounting, and equipment subsidies make a serious dent in a new customer's profitability. That is especially true given the rising subsidies for Smartphone users, which service providers hope will result in greater profits from profits from data services profitability in future.  The situation is made worse by falling prices and greater competition in mature markets.Customer acquisition through industry consolidation isn't cheap either. A North American service provider spent about $2,000 per subscriber in its acquisition of a smaller company earlier this year. While this has allowed it to leapfrog to become the largest mobile service provider in the country, it required a total investment of more than $28 billion (including assumption of the acquiree's debt).While many operating cost synergies clearly made this deal more attractive to the acquiring company, this is certainly an expensive way to acquire customers: the cost per subscriber in this case is not out of line with the prices others have paid for acquisitions.While growth by acquisition certainly increases overall revenues, it often creates tremendous challenges for profitability. Organic growth through increased customer loyalty and retention is a more effective driver of profit, as well as a stronger predictor of future profitability. Service providers, especially those in mature markets, are increasingly recognizing this and taking steps toward a creating a more personalized, flexible and satisfying experience for their customers.In summary, the clearest path to profitability for companies in virtually all industries is through customer retention and maximization of lifetime value. Service providers would do well to recognize this and focus attention on profitable customer relationships.

  Read the article

• CodePlex Daily Summary for Tuesday, January 04, 2011

  CodePlex Daily Summary for Tuesday, January 04, 2011Popular ReleasesMini Memory Dump Diagnosis using Asp.Net: MiniDump HealthMonitor: Enable developers to generate mini memory dumps in case of unhandled exceptions or for specific exception scenarios without using any external tools , only using Asp.Net 2.0 and above. Many times in production , QA Servers the issues require post-mortem or low-level system debugging efforts. This Memory dump generator will help in those scenarios.EnhSim: EnhSim 2.2.9 BETA: 2.2.9 BETAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the Gobl...xUnit.net - Unit Testing for .NET: xUnit.net 1.7 Beta: xUnit.net release 1.7 betaBuild #1533 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision)...Json.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14977.000: Prerequisites: ============== o Visual Studio 2008 / Visual Studio 2010 o ReSharper 5.1.1753.4 o StyleCop 4.4.1.2 Preview This release adds no new features, has bug fixes around performance and unhandled errors reported on YouTrack.BloodSim: BloodSim - 1.3.1.0: - Restructured simulation log back end to something less stupid to drastically reduce simulation time and memory usage - Removed a debug log entry that was left over from testing of 1.3.0.0 - Fixed a rounding and calculation error with Haste rating - Added option for Rune of SwordshatteringDbDocument: DbDoc Initial Version: DbDoc Initial versionASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.2: Atomic CMS 2.1.2 release notes Atomic CMS installation guide Kind Of Magic MSBuild Task: Beta 4: Update to keep up with latest bug fixes. To those who don't like Magic/NoMagic attributes, you may change these names in KindOfMagic.targets file: Change this line: <MagicTask Assembly="@(IntermediateAssembly)" References="@(ReferencePath)"/> to something like this: <MagicTask Assembly="@(IntermediateAssembly)" References="@(ReferencePath)" MagicAttribute="MyMagicAttribute" NoMagicAttribute="MyNoMagicAttribute"/>N2 CMS: 2.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) All-round improvements and bugfixes File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open the proj...Wii Backup Fusion: Wii Backup Fusion 1.0: - Norwegian translation - French translation - German translation - WBFS dump for analysis - Scalable full HQ cover - Support for log file - Load game images improved - Support for image splitting - Diff for images after transfer - Support for scrubbing modes - Search functionality for log - Recurse depth for Files/Load - Show progress while downloading game cover - Supports more databases for cover download - Game cover loading routines improvedAutoLoL: AutoLoL v1.5.1: Fix: Fixed a bug where pressing Save As would not select the Mastery Directory by default Unexpected errors are now always reported to the user before closing AutoLoL down.* Extracted champion data to Data directory** Added disclaimer to notify users this application has nothing to do with Riot Games Inc. Updated Codeplex image * An error report will be shown to the user which can help the developers to find out what caused the error, this should improve support ** We are working on ...TortoiseHg: TortoiseHg 1.1.8: TortoiseHg 1.1.8 is a minor bug fix release, with minor improvementsBlogEngine.NET: BlogEngine.NET 2.0: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. To get started, be sure to check out our installatio...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!New Projects3D SharePoint Tag Cloud in Silverlight: This is a Silverlight Tag Cloud intended for use in SharePoint but can be configured for use separately as well. Based on a blog post from Peter Gerritsen (http://blog.petergerritsen.nl/2009/02/14/creating-a-3d-tagcloud-in-silverlight-part-1/).AffinityUI for Unity 3D: AffinityUI makes writing GUI code for Unity 3D easier with a component based API that allows you to write GUIs in a declarative fashion using a fluent interface, update events and powerful two-way databinding. A visual editor and scene GUI support are planned for the future.calendar synchronization: This will enable tight integration between ivvy core and infragistics scheduler. Will utilize oData and native isolated strorage instead of SQLite as planed earlier.Card Games Library: The aim of this project is to offer a framework for creating card games logics and rules. This project is not focused on particular games but offers a felxible and extensible base for creating card games, like; poker, solitaire, rummy, etcDbDocument: DbDoc tool seeks to be helper tool side by side with MS SQL server management studio tool, you can design your DB Tables in visualized way through Diagrams and then use “DbDoc” tool to generate design document in MS Word table formatDelux: Delux project for educationDnEcuDiag - A .NET Ecu Diagnostic Application: DnEcuDiag is an application framework for developing electronic control unit diagnostic functionality without the need to implement code.Dynamics CRM 4.0 Recycle Bin: This add-on for Microsoft Dynamics CRM 4.0 to enable Recycle Bin Features (Restore, Permenant Delete) for CRM users.EPPLib.it: Il sistema sincrono di registrazione e mantenimento dei nomi a dominio del Registro.it utilizza il protocollo EPP (Extensible Provisioning Protocol). EPPLib consente di interfacciare i propri progetti con il sistema sincrono del Registro.it.IoC4Fun: Very LightWeight IoC or DI Container only required Net Framework 3.5 written in C#. For Small Apps or Educational purpose. Not intrusion code added like others Containers. Just Plan Register Dependencies and Let Container resolve magically the Injection Dependencies.ISocial: WP7 Application, centralise les réseaux sociauxJohnnyIssa: begASP.NET Version 4.LiveCPE: LiveCPE is an Academic project based on C# and ASP.Net. It aims to be a social network website. MS CRM - Skype Connector: Skype Addon for Microsoft Dynamics CRM allows to dial CRM Contacts, Lead and so on via Skype. It's developed in ASP.NET and C#.Ryan's Projects: a group of random c# projectsSeleniuMspec: SeleniuMspec is a template for Selenium IDE that generates Selenium tests for Mspec (a .NET BDD framework). SharePoint FAQ Web Part: The SharePoint FAQ Web Part makes it easier for SharePoint Users to display FAQs feature on their SharePoint sites. You'll no longer have to maintain HTML and anchors in the Content Editor Web Part, as the FAQs are now automatically generated from a SharePoint list. Silverlight Planet: Projetos da comunidade Silverlight Planet www.silverlightplanet.net.brWP7 Expense Report: Expense Report for Windows Phone 7xll - the easy way to create Excel add-ins: The xll C++ library makes it easy to create xll add-ins for Excel. It also supports the big grid, wide-character strings, and thread-safe functions. ????????: ????，??，??，????，????，??????

  Read the article

• SOLVED Install MythTV & 11.10 on Lenovo S12 (Intel atom) with wireless

  - by keepitsimpleengineer

  This is how I installed Ubuntu 11.10 and MythTV client on my Lenovo S12 (Intel Atom) laptop and use it using WiFi (see additional notes at end). I did this because the upgrade from 11.04 bricked the laptop. Note that the partitions on the Lenovo standard disk were already in place for this installation. Also note that my LAN is setup for fixed IP addresses. Downloaded and burned 11.10 x86 Desktop Ubuntu CD Connected the power supply cord, LAN wire and the external DVD USB drive. Ran Windows XP and made sure performance level "Performance" was set and "Wireless" was enabled. Booted S12 from CD Disabled Networking from icon on upper left panel icon Edited Connections… "Wired connection 1" ? Set IP address, accepted default netmask and set gateway. Also set DNS server. Good idea to check "Connection Information" here to verify everything's O.K. Selected Install Ubuntu from the initial "Install" window Verified the three items were checked (required disk space available, plugged into a power source, & connected to the Internet) Selected Download updates while installing and third party software. Hit Continue… At wireless selected don't want to connect…WiFi…now. Continue… At Installation type, selected Something else. Continue… At partition tale, selected the ext4 Linux partition, set the mount point as "/", and marked for formatting. Here I selected the main disk (/sda) for installing the boot manager. Continue… Selected or verified my Time zone. Continue… Selected my keyboard layout. Continue… Filled in the who are you fields. Make sure password is required to sign in is checked. Continue… Chose a picture. Continue… I selected import no accounts. Continue… Wait as the Install creeps along. If your screen goes blank, tap the space bar ? apparently the screen saver/power plan does this. There are several progress bars. The longest was "Installing system", and it was the next to the last one. Installation Complete window appears, Restart Now… Wait as it stops, The screen blanks then the message "…remove…media…close tray…press enter" I just unplugged the USB DVD and hit enter… It was disheartening but the screen turned Ubuntu Purple-beige and nothing happened, so I help down the power key until it shut down, the pressed it again and the Grub Boot screen appeared. Select Ubuntu… 25.The screen went blank with the little flashing underscore cursor on it and the disk light would occasionally flash. I hit the enter key and eventuality Ubuntu started. After a somewhat long time the unity desktop appeared. 11.10, unlike earlier versions, retains the connection information. Check this by checking the network icon on the upper left applet panel. Here the touch-pad·mouse quit working and I had to reboot. It takes and extremely long time to boot, sometimes requiring several power off/ power on (cold boot). You can try to get the default network manager to work, but it might not, it didn't on mine for WiFi. Thanks to: Chris at URL here's what to do… disconnect your wired Internet connection. input your wireless information into network manager open a terminal (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "terminal". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. click to open a terminal, and type in: sudo rmmod acer_wmi && echo "blacklist acer_wmi" >> /etc/modprobe.d/blacklist.conf and hit enter. type in your password as asked. if you have correctly entered your WiFi information and you are near your AP, you should connect immediately if not, see the URL above ? you might need to replace "network manager" with "wicd" ? I did with 11.04. Update the new 11.10, in the upper left panel applet weird·gear icon is menu with a line about updating. It's the new way to invoke Update Manager. Your lenovo S12 (intel atom) should now run the new unity Ubuntu. Point your elbow at the ceiling and pat yourself on the back. Installing Mythbuntu Client 24.1 Open mythbuntu.org/repos (I urge you not to directly use Ubuntu Software Center for this) Install Mythbuntu Repos Save the file (in ~/Downloads, the default) Run the file ? it will update your repositories so that you will get the proper installation sources ? it will start Ubuntu Software Center to do this ? Click Install… You will need your password. Debconf window will open, select by making sure check mark is in the little box "Would you like to activate…". Forward… Which version? At the time of writing the current "Stable" version was 24.1, select 0.24.x… Forward… Read the message, then forward… Delete the downloaded file. Install synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "synaptic". Click on the synaptic icon. Ubuntu Software Center will open and allow you to install synaptic package manager. Open Synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "Synaptic". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. Run synaptic, read the intro, and close the intro window. Type in mythbuntu-control-centre in the Quick filter text box, and then select it "Mark for installation" by clicking on the box next to it's name. Marvel at the additional to be installed items, then select "?Mark"… At the top of the synaptic window click on the "? Apply" button. Marvel at the amount of stuff to be installed, the click on "Apply". When finished, close finished window and synaptic. Open mythbuntu-control-centre (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythbuntu". Might be a good idea to drag and drop the mythbuntu-control-centre icon to the terminal, it's easy to get rid of later. You can now configure and install the frontend. Go down the icon totem on the right side of the window and click as needed… System roles. ? No Backend, Desktop Frontend, and Ubuntu Desktop. Apply… & Apply changes… & Password… MySQL Configuration ? from backend ? Setup General Alt-N(ext) Alt-N(ext) Stetting Access Setup PIN code: ~~~~ Input Security key and click "Test Connection", if ?, then Apply… & Apply… {note: for some inexplicable reason, control centre hung on this, but when I restarted it, it was set properly} Graphics drivers, When I did this, only the Broadcom wireless driver showed up. I closed without doing anything. Services. I enabled SSH & Samba. Apply… & Apply… Repositories. Asked & Answered. MythExport. Pass, I believe it requires backend on the same system. Proprietary Codec Support. Check to enable, Apply… & Apply… System Updates. No action necessary, will be a part of the Ubuntu update mechanism. Themes and Artwork. For themes, I selected Enable/Update all. Apply… & Apply… Infrared & Startup behavior and Plugins. Defer until you know more. Close software centre. Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Incorrect Group Membership. Fix this by clicking "Yes"… Log out/end. Do this by clicking "Yes"… For my Lenovo S12, I had to manually restart Ubuntu - and still with the very long restart…/no start/cold boot/reboot/pressing the shift key required Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Will open with Select country & language. Do so. then get message with "No", hit "Ok" and arrive at the data base Configuration 1/2 screen. You will need your brackend password, from backend ? Setup General Database Configuration 1/2 Password:~? Enter this Hit Alt-n to go to the next page. Select "Use custom id…", then enter a custom ID, I use the machine's name. Hit finish, and MythTV should start up with all default settings. For the lenovo S12, the first thing you want to do is to set Playback profiles to "Normal". From Setup TV Settings Playback Alt-N(ext) Alt-N(ext) Playback Profiles (3/8) : Change Current Video Playback Profile to "Normal". You can fiddle with this setting later. For the lenovo S12, the second thing is to get the sound going. From Setup General Alt-N(ext) Alt-N(ext) Alt-N(ext) Audio System: The top of the screen is a button title "Scan for audio devices", move the highlight there and press the Space bar. Then Tab down to Audio Output Device: and left-right arrow until "ALSA:hw:Card=Intel,DEV=0" is selected. Then Alt-N(ext) until "Finish". Now you should have sound. You should now have MythTV working nicely on the Lenovo S12 Notes about wireless: Running Lenovo S12 on wireless is demanding on both power and WiFi connection. Best results will be obtained when running on power and wired connection. I run my S12 on wireless, actually two serial connections with two access points, something that is not easy to achieve. Here Mythbuntu client-server (in den) <? wireless link 1 <?office LAN? wireless link 2 <? Lenovo S12 Ubuntu 11.10 The office LAN is fixed IP behind an Untangle firewall router. There is another MythTV client on Ubuntu 10.10 computer in the office (which has always worked well). ProblemMythbuntu\Win7 client hangs with frozen frames, short segment of audio repeating. Hardware Rosewill RNX-G300EX IEEE 802.11b/g PCI Wireless Card on client-server 2 Linksys WRT54GL wireless broadband routers on LAN for link1 and link 2 WRT54GL FirmwareDD-WRT v24-sp2(07/22/09) voip set up to act as an access point. Note? many people advised this was an unworkable scheme, and in probably most cases it will be. Solution? Set up DD-WRT with the following Wireless settings… Basic Channel: Different fixed channels at least 4 difference, I use 6 & 11 Basic Sensitivity Range (ACK timing): 50 MAC filter use filter: Enable, Selected Permit only clients listed to access… Requires adding MAC addresses in "Edit MAC Filter List" This causes the 54GL's to ignore any but the listed MAC address, down side, no "guest" capability. Advanced Basic rate: All Advanced CTS Protection Mode: Off Advanced Frame Burst: Enable Advanced Max associate clients: 4 for client link 2, 1 for client-server link 1 Advanced AP isolation: Enable Advanced Preamble: Short Advanced Afterburner: On Advanced Wireless GUI access: Off Advanced WMM support: Off Other settings: default for supplied firmware. Why I suspect this worked? The 54GL Access Points's with the firmware's setting are set to handle a multiple client, wide area situation. With these mods I reconfigured them for a small area, few client situation, disabling Advanced WMM probably the most important. In addition, the client mythtv when used all other users of its access point are turned off except for a Skype phone. Also, the client-server is set up to allow other connections though it's LAN connection, and these are used to connect the TV and disc players, not used when client is being used.

  Read the article

• SQLAuthority News – Job Interviewing the Right Way (and for the Right Reasons) – Guest Post by Feodor Georgiev

  - by pinaldave

  Feodor Georgiev is a SQL Server database specialist with extensive experience of thinking both within and outside the box. He has wide experience of different systems and solutions in the fields of architecture, scalability, performance, etc. Feodor has experience with SQL Server 2000 and later versions, and is certified in SQL Server 2008. Feodor has written excellent article on Job Interviewing the Right Way. Here is his article in his own language. A while back I was thinking to start a blog post series on interviewing and employing IT personnel. At that time I had just read the ‘Smart and gets things done’ book (http://www.joelonsoftware.com/items/2007/06/05.html) and I was hyped up on some debatable topics regarding finding and employing the best people in the branch. I have no problem with hiring the best of the best; it’s just the definition of ‘the best of the best’ that makes things a bit more complicated. One of the fundamental books one can read on the topic of interviewing is the one mentioned above. If you have not read it, then you must do so; not because it contains the ultimate truth, and not because it gives the answers to most questions on the subject, but because the book contains an extensive set of questions about interviewing and employing people. Of course, a big part of these questions have different answers, depending on location, culture, available funds and so on. (What works in the US may not necessarily work in the Nordic countries or India, or it may work in a different way). The only thing that is valid regardless of any external factor is this: curiosity. In my belief there are two kinds of people – curious and not-so-curious; regardless of profession. Think about it – professional success is directly proportional to the individual’s curiosity + time of active experience in the field. (I say ‘active experience’ because vacations and any distractions do not count as experience :)  ) So, curiosity is the factor which will distinguish a good employee from the not-so-good one. But let’s shift our attention to something else for now: a few tips and tricks for successful interviews. Tip and trick #1: get your priorities straight. Your status usually dictates your priorities; for example, if the person looking for a job has just relocated to a new country, they might tend to ignore some of their priorities and overload others. In other words, setting priorities straight means to define the personal criteria by which the interview process is lead. For example, similar to the following questions can help define the criteria for someone looking for a job: How badly do I need a (any) job? Is it more important to work in a clean and quiet environment or is it important to get paid well (or both, if possible)? And so on… Furthermore, before going to the interview, the candidate should have a list of priorities, sorted by the most importance: e.g. I want a quiet environment, x amount of money, great helping boss, a desk next to a window and so on. Also it is a good idea to be prepared and know which factors can be compromised and to what extent. Tip and trick #2: the interview is a two-way street. A job candidate should not forget that the interview process is not a one-way street. What I mean by this is that while the employer is interviewing the potential candidate, the job seeker should not miss the chance to interview the employer. Usually, the employer and the candidate will meet for an interview and talk about a variety of topics. In a quality interview the candidate will be presented to key members of the team and will have the opportunity to ask them questions. By asking the right questions both parties will define their opinion about each other. For example, if the candidate talks to one of the potential bosses during the interview process and they notice that the potential manager has a hard time formulating a question, then it is up to the candidate to decide whether working with such person is a red flag for them. There are as many interview processes out there as there are companies and each one is different. Some bigger companies and corporates can afford pre-selection processes, 3 or even 4 stages of interviews, small companies usually settle with one interview. Some companies even give cognitive tests on the interview. Why not? In his book Joel suggests that a good candidate should be pampered and spoiled beyond belief with a week-long vacation in New York, fancy hotels, food and who knows what. For all I can imagine, an interview might even take place at the top of the Eifel tower (right, Mr. Joel, right?) I doubt, however, that this is the optimal way to capture the attention of a good employee. The ‘curiosity’ topic What I have learned so far in my professional experience is that opinions can be subjective. Plus, opinions on technology subjects can also be subjective. According to Joel, only hiring the best of the best is worth it. If you ask me, there is no such thing as best of the best, simply because human nature (well, aside from some physical limitations, like putting your pants on through your head :) ) has no boundaries. And why would it have boundaries? I have seen many curious and interesting people, naturally good at technology, though uninterested in it as one  can possibly be; I have also seen plenty of people interested in technology, who (in an ideal world) should have stayed far from it. At any rate, all of this sums up at the end to the ‘supply and demand’ factor. The interview process big-bang boils down to this: If there is a mutual benefit for both the employer and the potential employee to work together, then it all sorts out nicely. If there is no benefit, then it is much harder to get to a common place. Tip and trick #3: word-of-mouth is worth a thousand words Here I would just mention that the best thing a job candidate can get during the interview process is access to future team members or other employees of the new company. Nowadays the world has become quite small and everyone knows everyone. Look at LinkedIn, look at other professional networks and you will realize how small the world really is. Knowing people is a good way to become more approachable and to approach them. Tip and trick #4: Be confident. It is true that for some people confidence is as natural as breathing and others have to work hard to express it. Confidence is, however, a key factor in convincing the other side (potential employer or employee) that there is a great chance for success by working together. But it cannot get you very far if it’s not backed up by talent, curiosity and knowledge. Tip and trick #5: The right reasons What really bothers me in Sweden (and I am sure that there are similar situations in other countries) is that there is a tendency to fill quotas and to filter out candidates by criteria different from their skill and knowledge. In job ads I see quite often the phrases ‘positive thinker’, ‘team player’ and many similar hints about personality features. So my guess here is that discrimination has evolved to a new level. Let me clear up the definition of discrimination: ‘unfair treatment of a person or group on the basis of prejudice’. And prejudice is the ‘partiality that prevents objective consideration of an issue or situation’. In other words, there is not much difference whether a job candidate is filtered out by race, gender or by personality features – it is all a bad habit. And in reality, there is no proven correlation between the technology knowledge paired with skills and the personal features (gender, race, age, optimism). It is true that a significantly greater number of Darwin awards were given to men than to women, but I am sure that somewhere there is a paper or theory explaining the genetics behind this. J This topic actually brings to mind one of my favorite work related stories. A while back I was working for a big company with many teams involved in their processes. One of the teams was occupying 2 rooms – one had the team members and was full of light, colorful posters, chit-chats and giggles, whereas the other room was dark, lighted only by a single monitor with a quiet person in front of it. Later on I realized that the ‘dark room’ person was the guru and the ultimate problem-solving-brain who did not like the chats and giggles and hence was in a separate room. In reality, all severe problems which the chatty and cheerful team members could not solve and all emergencies were directed to ‘the dark room’. And thus all worked out well. The moral of the story: Personality has nothing to do with technology knowledge and skills. End of story. Summary: I’d like to stress the fact that there is no ultimately perfect candidate for a job, and there is no such thing as ‘best-of-the-best’. From my personal experience, the main criteria by which I measure people (co-workers and bosses) is the curiosity factor; I know from experience that the more curious and inventive a person is, the better chances there are for great achievements in their field. Related stories: (for extra credit) 1) Get your priorities straight. A while back as a consultant I was working for a few days at a time at different offices and for different clients, and so I was able to compare and analyze the work environments. There were two different places which I compared and recently I asked a friend of mine the following question: “Which one would you prefer as a work environment: a noisy office full of people, or a quiet office full of faulty smells because the office is rarely cleaned?” My friend was puzzled for a while, thought about it and said: “Hmm, you are talking about two different kinds of pollution… I will probably choose the second, since I can clean the workplace myself a bit…” 2) The interview is a two-way street. One time, during a job interview, I met a potential boss that had a hard time phrasing a question. At that particular time it was clear to me that I would not have liked to work under this person. According to my work religion, the properly asked question contains at least half of the answer. And if I work with someone who cannot ask a question… then I’d be doing double or triple work. At another interview, after the technical part with the team leader of the department, I was introduced to one of the team members and we were left alone for 5 minutes. I immediately jumped on the occasion and asked the blunt question: ‘What have you learned here for the past year and how do you like your job?’ The team member looked at me and said ‘Nothing really. I like playing with my cats at home, so I am out of here at 5pm and I don’t have time for much.’ I was disappointed at the time and I did not take the job offer. I wasn’t that shocked a few months later when the company went bankrupt. 3) The right reasons to take a job: personality check. A while back I was asked to serve as a job reference for a coworker. I agreed, and after some weeks I got a phone call from the company where my colleague was applying for a job. The conversation started with the manager’s question about my colleague’s personality and about their social skills. (You can probably guess what my internal reaction was… J ) So, after 30 minutes of pouring common sense into the interviewer’s head, we finally agreed on the fact that a shy or quiet personality has nothing to do with work skills and knowledge. Some years down the road my former colleague is taking the manager’s position as the manager is demoted to a different department. Reference: Feodor Georgiev, Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208  | Next Page >