Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 205/444 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• How do you explain ethernet cable problems to non networking people?

  - by Bryan McLemore

  We've recently been doing a large network migration in our datacenter. We've had a few cables in this start to deliver really bad pings (in excess of 500ms on a LAN) before they could be replaced. The cables we were replacing weren't made the best. They where all hand made and the runs were so short on some of them that the bend radius was definitely too tight. Some of them ran in bundles right in front of the heat exhaust of the power supplies. The cables were running ok until we started pulling the ones surrounding them out. Then a few started having the problem I mentioned above degrading performance and causing reliability issues. I'm trying to figure out the best way to explain this to non networking people. Is there any documentation that people could recommend or other methods?

  Read the article

• Using iTunes within Terminal Services 2008 R2 - Pitfalls etc

  - by Kristiaan

  I was hoping to get some further information on any possible Do's and Don't when it comes to installing, using and maintaining iTunes within a Termina Server environment. We have come across a situation in our company whereby some of our users who are using thin clients now need the ability to sync, update and manage their devices, previously they used either standard desktop systems or laptops so there was no issue with running iTunes. I have not found much information on the web about using iTunes within a Terminal Server Farm, Id like to find out if iTunes works within the environment, any known or common issues that occur due to running it like this.

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• Windows XP Pro 'Connect to' logon box greyed out with Guest

  - by HaydnWVN

  Have a machine i've just nuked and paved to be used in a public enviroment, yet still connected to a Workgroup. Would like it to prompt for a logon when accessing any of the network shares as different departments will be using it. It does prompt for a login but the username field is greyed out. Have disabled simple file sharing, disabled guest account, changed Local Security Policies (Network access Sharing and Security model to 'classic') all to no avail. A google around has lots of other people with the same issues, lots of 'fixes' with very few feedback. Of course none of these work for me! :)

  Read the article

• Computer temporarily freezes and then resumes

  - by trizicus

  This happens on ALL operating systems (7, Ubuntu, etc.). What happens is everything for 1-3 seconds becomes unresponsive, I then hear what sounds like my other internal hard drive 'spinning up', and then viola everything is responsive again. Note: Already ran SMART tests, no issues at all. I think issue is that the HDD spins down and when need it gets 'turned-on' (OS settings turn off HDD's after 20 mins of inactivity) and because my pagefile is on the other HDD it causes OS to temporarily freeze. Need more tips, and insight. Thanks More info: Running Quad CPU, 4GB RAM, Intel SSD, GT 240.

  Read the article

• How do we increase the maximum allowed HTTP GET query length in Jetty?

  - by Mike

  We are using Jetty to run an Apache Solr index. We've had some queries that have grown way beyond the previously expected maximum length, and are now having issues wehre most queries are not returning any data because the URL gets truncated. These requests are not being made through a browser, they're being made programmatically using the Apache_Solr_Service PHP library. The application is expecting queries to come in as HTTP GET requests, so simply switching to a POST will not solve this problem. How can we increase the maximum allowed HTTP GET query length in Jetty? Thanks!

  Read the article

• Verizon Fivespot firewall

  - by Patrick

  I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

  Read the article

• Finding Locked Out Users

  - by Bart Silverstrim

  Active Directory up to 2008 network (our servers are a mix of 2008, 2003...) I'm looking for a quick way to query AD to find out what users are locked out, preferably from a batch or script file, to monitor for possible issues with either user accounts being attacked by an automated attack or just anomalies in the network. I've Googled and my Google-fu has failed; I found a query off Microsoft's own knowledgebase that cites a string to use on Server 2003 with the management snap-in's saved queries (http://support.microsoft.com/kb/555131) but when I entered it, the query returned 400 users that a spot-check showed did NOT have a checkmark in the "Account is locked out" box under "account." In fact, I don't see anything wrong with their accounts. Is there a simple utility (wisesoft bulkadusers apparently uses this method behind the scenes, since it's results were also wrong) that will give a count of users and possibly their user object names? Script? Something?

  Read the article

• Outlook 2010 intermittently going offline

  - by BarmyArmy

  Just a quick question to see if anyone can give me any direction in or solve the the following problem: Within the office there are a minority who use Outlook client using IMAP and the rest use Thunderbird on Linux. The people who are using Outlook 2010 are repeated (almost daily) reporting outages of emailing services for hours at a time forcing them to sign in and out etc but the people using Thunderbird do not have any issues what so ever which I assume will rule out an issue with the old mail server we are currently using. Any help in the matter would be hugely appreciated and of course if I can provide any further information to articulate understanding of the issue then please just ask. Thanks!

  Read the article

• How can I perform a ping every X minuts and check the response time?

  - by Profete162

  I am currently working in a big company and we have serious latency issues. This is happening in a process control system, and is unacceptable (Open a valve sometimes take 2 minuts before command start) The Network team seems very lazy and I want to check when they say "everything alright on the network". So, I want to create a loop that ping the server and write the result in a text file. I am not a batch expert, but do you think this code is correct to use? @ECHO OFF :LOOPSTART time /T ping xxx.xx.x.x -t >> filename.txt sleep -m 3000 GOTO LOOPSTART

  Read the article

• Why can't I connect to a wifi network with my laptop, when I can with my phone?

  - by Alex Sf.

  I can connect with my phone and use the browser as usual. On my laptop it won't connect when using windows 7 while in ubuntu it will connect, but with no internet. What is going on here and how can I get internet on my laptop ? [edit] It's a public wifi hotspot. I can connect with no issues at home. My network asapter is: Atheros AR5B97. And my phone is an iPhone 3G. The wizard's of no help since it asks me to check the router, which I can't since it's a public hostspot.

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• remove apache tar binary package in centos

  - by user119720

  I need help in removing binary package that had been installed in my linux machine. The scenario that I am having are such as like this: I've already install latest apache that I get from its website(httpd.apache.org) through Unix binary package(tar.gz) After successfully install program,the apache server web perfectly without any issues. But then I having a thought,if there are another latest release version of apache in the future,then I need to make sure that i can upgrading current apache or reinstalling the new version apache. So my question is, how do I ensure that I have remove the old remove apache and all its dependencies so that it will not having conflict(probably) when installing the new apache. Right now the only thing that i can think of is to remove all the apache folder manually : rm -rf /apache2 Hope someone can shed some light about this.Thanks.

  Read the article

• Windows 2008 x64 displays SP1 when SP2 is installed

  - by Graham Powell

  After setting up a Windows 2008 x64 server (not R2), I installed a number of Microsoft updates. After installing these updates, the computer reports that it has SP1 installed, not SP2. I believe the culprit is KB917607, which allows Windows 2008 to display .hlp files. Now I have to upgrade Internet Explorer on this server, and it won't install without SP2. I am very leery about reinstalling SP2, as I have installed a large number of post-SP2 updates, and I've had issues after reinstalling SP2 in similar circumstances. How can I fix Windows so it reports the correct service pack?

  Read the article

• Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

  - by balupton

  So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

  Read the article

• Distribute Nagios to reduce false alarms

  - by GDR

  I'm currently running a single Nagios instance. From time to time, I'm getting false alarms about timeouts - for example, it says that HTTP is down on some server, but when I open it in my browser several seconds later, it loads fast, and in general there is no trace of an error. What can I do to reduce such false alarms? I'm guessing that it's because of transient network issues on my monitoring server. I guess that setting up another monitoring server on a different network would greatly help, but how do I plug it into Nagios? Is it at all possible with Nagios or do I have to switch to another monitoring system? I like my configs and, if possible, I'd like to stay with Nagios or something compatible (Icinga?)

  Read the article

• Fonts not found when print request comes from a child process of a Service

  - by beeglebug

  I have a strange issue on a Windows Server 2003 box which has been baffling me for days now. I have a service running on the machine which calls a specified exe every 60 seconds, the exe looks at a local database to see if it needs to print anything, and if so, it prints it to a network laser printer. The problem i'm having is that some fonts won't print out when the exe is called automatically by the service, but work fine if I double click the exe to run it. The font was installed by Administrator, but the service runs as NT Authority\System. I thought this might have something to do with it, but I tried running the service as Administrator, and that didn't solve it. Are there any issues with fonts and permissions that i'm not aware of that could be causing this behaviour?

  Read the article

• How do I stop ubuntu waiting for me to "Press S to skip of C to continue..." when it fails to mount on startup?

  - by Jon Cage

  I've been having some issues with my RAID setup recently on my headless Ubuntu 10.04 server which means one of my mount requests is failing on bootup. Clearly I need to fix the RAID issue, but this machine is in my loft and having to crawl up there with a keyboard just so I can hit S a few times is extremely irritating. The exact message is as follows: The disk drive for /drv/photos is not ready yet or not present Continue to wait; or Press S to skip mounting or M for manual recovery I'd still like Ubuntu to try and mount it, but is there any way to tell it not to wait for the device?

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect

  - by Goober

  I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Cannot fix induced 0x7b error on XP

  - by Malfist

  I'm writing a tool that will automagically fix the STOP 0x7B error that occurs when windows cannot access the hard drive due to driver issues (usually). I've wrote a tool that does everything the Knowledge Base article says to do. But it's not working. I'm inducing the issue by changing the bios SATA controller to AHCI, then moving it to another computer and updating it's registry. When I move it back to the other computer, nothing new happens. Can someone tell me what more I need to do?

  Read the article

• Terminal Server Install -- Add/Remove Program Message on NonAdministrator Machines

  - by Brandon

  First time poster... My company uses terminal services for one of our remote offices. Data is kept on a different server. OS is Windows Server 2003. Last week, they needed to purchase a program and have it installed on terminal server, which was done. An administrator session was started, the TS was put into install mode and the program was installed. The TS was then put back into execute mode. The install did not require a reboot. Since then, when any user who does not have administrator privileges initiates a remote session and logs in they get a security message that says "Add / Remove programs has been restricted. Please contact your system administrator." The only option is to click OK, which everyone does and after that there are no issues. Anyone have any idea why this is happening and how to fix? Thanks!

  Read the article

• Recording Interfaces for OS X that are supported/work well?

  - by Troggy

  For os x, I would like to know what other audio production/music recording interface type products people have found to work well with os x? I do not want to know about stuff that only works. I want to know about solid products that work well and are supported well by the company when issues arise. I for example have a M-Audio Firewire Solo recording interface. I have found M-Audio to be a company with great mac support for their products and they integrate well with os x features and apple software. Clarification: I am wondering about the recording interfaces themselves, as in the hardware, that are compatible with os x and supported/work/integrate well.

  Read the article

• consulting a network admin for rails and php applications

  - by Karo Devos

  Hi I'm a web developer who writes most of the time rails applications. Next month I'm going to switch from my current VPS to linode. I'm wondering how much it would cost to properly set (or teach me how to do it) everything to get my app up and running. My requirements are probably: nginx/apache, REE/ruby, passenger, full blown php environment, system wide RVM, search engine such a sphinx, being able to perform cronjobs. I have some knowledge of unix and I was able to install everything I needed on my development system. However I had quite a few issues setting up everything on my production server.

  Read the article

• Has anyboy been able to install Pantograph for Blender on Windows?

  - by S.gfx

  I am specially interested on if somebody is actually doing/maintaining an installer for Windows, as there are quite several issues when installing all dependencies, etc. (for example, there might be someone already doing a Installbuilder installer for it and am just not aware of the matter) If not, at least if someone got it working and has some key tip to share. I am never able to fully get it all up and running. I'd love to have a not super complex way to install each new build of this great vector rendering module for Blender. Edit- Pantograph url: http://severnclaystudio.wordpress.com/bluebeard/a-users-guide-to-pantograph/

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >